HEXAGONAL BOLTS HALF THREAD & FULL THREAD
|
|
- Piers Potter
- 7 years ago
- Views:
Transcription
1 HEXAGONAL BOLTS HALF THREAD & FULL THREAD DIN- 931 & 933 LENGTH (mm) DIA: MIN MAX M M M M M M M M M M M M M M M M M M M M LENGTH (INCH) DIA: MIN MAX 3/16" 3/8" 2" 1/4" 1/2" 5" 5/16" 1/2" 6" 3/8" 3/4" 8" 7/16" 3/4" 8" 1/2" 1" 10" 9/16" 1" 10" 5/8" 1-1/4" 16" 3/4" 1-1/2" 16" 7/8" 1-3/4" 16" 1" 2" 16" 1-1/8" 2-1/2" 16" 1-1/4" 3" 16" 1-3/8" 4" 16" 1-1/2" 5" 16" 1-3/4" 6" 20" 2" 7" 20" 2-1/4" 7-1/2" 20" 2-1/2" 8" 20" 1. FINISH : GALVANIZED, BLACK, HOT DIP GALVANIZED 2. THREAD : UNC-UNF (COURSE, FINE THREAD ) BSW 3. GRADE : 4.6, 6.8, 8.8, 10.9, 12.9 ASTM A307-A, A307-B, A325, G2, G5 Web: sales@sbn-est.com 1
2 HEXAGONAL BOLTS HALF THREAD & FULL THREAD STAINLESS STEEL. 304 & 316 DIN 931 & 933 LENGTH (mm) DIA MIN MAX M M M M M M M M M M M M M M M M M M M M DIA LENGTH (INCH) MIN MAX 3/16" 3/8" 2" 1/4" 1/2" 5" 5/16" 1/2" 6" 3/8" 3/4" 8" 7/16" 3/3" 8" 1/2" 1" 10" 9/16" 1" 10" 5/8" 1-1/4" 16" 3/4" 1-1/2" 16" 7/8" 1-3/4" 16" 7/8" 1-3/4" 16" 1" 2" 16" 1-1/8" 2-1/2" 16" 1-1/4" 3" 16" 1-3/8" 4" 16" 1-1/2" 5" 16" 1-3/4" 6" 20" 2" 7" 20" 2-1/4" 7-1/2" 20" 2-1/2" 8" 20" Web: 2
3 HEXAGONAL BOLT HALF & FULL THREAD BRASS DIN 931 & 933 LENGTH (mm) DIN MIN MAX M M M M M M M M M M M M M M LENGTH (INCH) DIN MIN MAX 3/16" 3/8" 2" 1/4" 1/2" 5" 5/16" 1/2" 6" 3/8" 3/4" 8" 7/16" 3/4" 8" 1/2" 1" 10" 9/16" 1" 10" 5/8" 1-1/4" 16" 3/4" 1-1/2" 16" 7/8" 1-3/4" 16" 1" 2" 16" 1-1/8" 2-1/2" 16" 1-1/4" 3" 16" 1-3/8" 4" 16" Web: 3
4 HEXAGONAL SOCKET HEAD CAP SCREWS DIN 912 (mm) LENGTH MIN MAX M M M M M M M M M M M M M M M M M (INCH) LENGTH MIN MAX 3/16" 3/8" 4" 1/4" 3/8" 4" 5/16" 1/2" 4" 3/8" 1/2" 5" 7/16" 3/4" 6" 1/2" 3/4" 6" 5/8" 3/4" 6" 3/4" 1" 6" 7/8" 1-1/2" 6" 1" 2" 6" 1-1/8" 3" 6" 1-1/4" 3" 6" HEXAGON SOCKET COUNTERSUNK HEAD CAP SCREWS DIN (mm) LENGTH MIN MAX M M M M M M M M M M (INCH) LENGTH MIN MAX 3/16" 5/16" 4" 1/4" 3/8" 4" 5/16" 3/8" 4" 3/8" 5/8" 4" 1/2" 3/4" 4" 5/8" 1" 5" 3/4" 1" 6" CARBON STEEL & MILD STEEL (BLACK, GALVANIZED, YELLOW) & STAINLESS STEEL. 304 & 316 GRADE: - 8.8, 10.9, & 12.9 Web: sales@sbn-est.com 4
5 HEXAGON SOCKET SET SCREWS CARBON STEEL & STAINLESS STEEL. 304 & 316 HEX SOCKET SET SCREWS FLAT POINT. DIN 913 HEX SOCKET SET SCREWS CONE POINT. DIN 914 HEX SOCKET SET SCREWS CUP POINT. DIN 916 LENGTH (mm) (mm) MIN MAX M M M M M M M M M LENGTH (INCH) PITCH (INCH) MIN MAX 3/16" 1/4" 1-1/4" 24 1/4" 1/4" 1-1/2" 20 5/16" 5/16" 2" 18 3/8" 3/8" 2" 16 1/2" 1/2" 2" /8" 5/8" 2" 11 T BOLTS ELECTRO GALVANIZED, STAINLESS STEEL. 304 & 316 (mm) LENGTH (mm) MIN MAX M M M M M M Web: sales@sbn-est.com 5
6 CARRIAGE BOLTS CARBON STEEL & MILD STEEL (GALVANIZED, BLACK, YELLOW) & STAINLESS STEEL. 304 & 316 LENGTH (mm) MIN MAX M M M M M M LENGTH (INCH) (INCH) MIN MAX 1/4" 5/8" 4" 5/16" 3/4" 4" 3/8" 1" 4" 1/2" 1-1/4" 5" 5/8" 1-1/2" 8" 3/4" 2" 10" 7/8" 2" 10" 1" 2" 10" MACHINE SCREWS COUNTER SUNK & PAN HEAD DIN 936 & 84, DIN 7985 & 965 MILD STEEL (ZINC PLATED ) & STAINLESS STEEL 304 & 316 (mm) LENGTH (mm) MIN MAX M M M M M M M M M M Web: sales@sbn-est.com 6
7 SELF TAPPING SCREWS NICKEL PLATED, ZINC PLATED & STAINLESS STEEL, PHILLIPS FLAT HEAD & COMBINED PAN HEAD MIN MAX #4 3/8" 2" #6 3/8" 3" #8 1/2" 3" #10 1/2" 4" #12 1/2" 4" #14 3/4" 4" ROOFING BOLTS & NUTS LENGTH 3/16" 1/2" 5/8" 3/4" 1" 1-1/4" 1-1/2" 1-3/4" 2" 2-1/2" 3" 3-1/2" 4" LENGTH 1/4" 1/2" 5/8" 3/4" 1" 1-1/4" 1-1/2" 1-3/4" 2" 2-1/2" 3" 3-1/2" 4" 4-1/2" 5" 5-1/2" 6 Web: sales@sbn-est.com 7
8 LAG SCREWS MILD STEEL ( ZINC PLATED ) & STAINLESS STEEL. 304 & 316 DIA (mm) DIN 571 LENGTH (mm) MIN MAX M M M M M DIA (INCH) LENGTH (INCH) MIN MAX 1/4" 1" 6" 5/16" 1-1/4" 6" 3/8" 1-1/2" 10" 1/2" 2" 10" 5/8" 2" 10" WOOD SCREWS MILD STEEL ( SELF COLOR, GALVANIZED, BRASS ) & STAINLESS STEEL. 304 & 316 SCREW LENGTH (INCH) MIN MAX #4 3/4" 1-1/4" #5 3/4" 1-1/2" #6 3/4" 2" #7 3/4" 2" #8 1" 3" #10 1" 4" #12 1-1/4" 4" #14 1-1/2" 4" DRY WALL SCREWS BLACK & ZINC PLATED SCREW LENGTH (INCH) MIN MAX #6 5/8" 1-1/2" #7 3/4" 3" #8 3/4" 3" Web: sales@sbn-est.com 8
9 SELF DRILLING SCREWS GALVANIZED & BLACK LENGTH (INCH) NO: MIN MAX #6 1/2" 2-1/2" #7 3/4" 3" #8 1" 3" SELF DRILLING SCREWS WITHOUT & WITH RUBBER BOUNDED WASHER CARBON STEEL & MILD STEEL (ZINC PLATED) & STAINLESS STEEL. 304 & 316 DIN LENGTH (INCH) NO: MIN MAX #10 1/2" 1-1/2" #8 1/2" 2" #12 5/8" 2" #14 3/4" 6" STEEL RUBBER BOUNDED WASHER WASHER NO: #8 #10 #12 #14 Web: sales@sbn-est.com 9
10 SELF- DRILLING SCREWS WAFER HEAD BLACK & ZINC PLATED SELF DRILLING SCREWS WAFER HEAD WITH WASHER BLACK & ZINC PLATED DIN DIN / NO: LENGTH #6 7/16" #7 7/16" #8 1/2" #8 5/8" #8 3/4" #8 1" #8 1-1/4" #8 1-1/2" /NO: LENGTH #8 1/2" #8 5/8" #8 3/4" #8 1" #8 1-1/4" #8 1-1/2" #8 2" #10 3/4" #10 1" #10 1-1/4" #10 1-1/2" #10 2" SHEET METAL SCREWS WITHOUT & WITH STEEL BOUNDED RUBBER WASHER NO: LENGTH MIN MAX #8 1/2" 1-1/2" #10 1/2" 2" #12 1/2" 2" #14 3/4" 6" #16 3/4" 6" Web: sales@sbn-est.com 10
11 PLOW BOLT GRADE 5 DIA LENGTH (INCH) MIN MAX 7/16" 1-1/2" 3" 1/2" 1-1/2" 3" 5/8" 2" 5" 7/8" 2-1/2" 5" 1" 3" 5" 1-1/4" 4" 6" DOME HEAD BOLT & SQUARE NUT GRADE 8.8 / 10.9 LENGTH (mm) DIA MIN MAX M16 M45 M60 M20 M50 M75 M22 M60 M75 M24 M76 M75 DIA LENGTH (INCH) MIN MAX 1/2" 1-1/2" 2" 5/8" 2" 3" 3/4" 2" 3" 7/8" 3" 3" 1" 3" 3" (mm) (INCH) M16 1/2" M20 5/8" M22 3/4" M24 7/8" 1" Web: sales@sbn-est.com 11
12 HEXAGONAL NUTS CARBON STEEL & MILD STEEL (GALVANIZED, BLACK, HOT DIP GALVANIZED) & STAINLESS STEEL. 304 & 316 (mm) M4 M5 M6 M8 M10 M12 M14 M16 M18 M20 M22 M24 M27 M30 M33 M36 M39 M42 M45 M48 M52 M56 M64 (INCH) 3/16" 1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8" 3/4" 7/8" 1" 1-1/8" 1-1/4" 1-3/8" 1-1/2" 1-5/8" 1-3/4" 1-7/8" 2" 2-1/4" 2-1/2" 1. THREAD - U N C U N F (COURSE, FINE THREAD) 2. GRADE - 2, 5, 8 & 10 SPRING NUTS MILD STEEL (GALVANIZED, HOT DIP GALVANIZED) & STAINLESS STEEL. 304 & 316 (mm) M5 M6 M8 M10 M12 (INCH) 1/4" 5/16" 3/8" 1/2" Web: sales@sbn-est.com 12
13 T NUTS YELLOW & GALVANIZED (mm) M5 M6 M8 M10 M12 FLANGE NUTS CARBON STEEL & MILD STEEL (YELLOW, GALVANIZED) & STAINLESS STEEL. 304 & 316 DIN 6923 (mm) (INCH) M6 M8 M10 M12 M16 M20 M24 1/4" 3/8" 1/2" 5/8" 3/4" 7/8" 1" HEAVY HEX NUTS ASTM A563, A194 2H Gr. 4 & B16, B8, B8M CARBON STEEL & MILD STEEL(BLACK, GALVANIZED, HOT DIP GALVANIZED) STAINLESS STEEL. 304 & 316 (mm) M10 M12 M14 M16 M18 M20 M22 M24 M27 M30 M33 M36 M39 M42 (INCH) 1/2" 5/8" 3/4" 7/8" 1" 1-1/8" 1-1/4" 1-1/2" 1-3/8" 1-5/8" 1-3/4" 1-7/8" 2" 2-1/2" Web: sales@sbn-est.com 13
14 COUPLING NUT LENGTH (mm) MIN MAX M M M M M M M M M M LENGTH (INCH) MIN MAX 1/4" 3/4" 1" 5/16" 1-1/4" 1-1/2" 3/8" 1-1/4" 2" 1/2" 1-1/4" 2" 5/8" 1-1/4" 2" 3/4" 2" 2-1/2" 7/8" 2" 2-1/2" 1" 2" 2-1/2" WING NUTS CARBON STEEL & MILD STEEL (NICKEL PLATED) & STAINLESS STEEL. 304 & 316 DIN -315 (mm) M5 M6 M8 M10 M12 M14 M16 (INCH) 3/16" 5/16" 3/8" 1/2" 5/8" 3/4" CAP NUTS CARBON STEEL & MILD STEEL (NICKEL PLATED) & STAINLESS STEEL. 304 & 316 DIN 1587 (mm) M5 M6 M8 M10 M12 M14 M16 M20 (INCH) 3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" LOCK NUTS CARBON STEEL & MILD STEEL (NICKEL PLATED) & STAINLESS STEEL. 304 & 316 DIN 1587 (mm) (INCH) M5 M6 M8 M10 M12 M14 M16 M18 M20 M22 M24 M27 M30 M33 M36 3/16" 1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8" 3/4" 7/8" 1" 1-1/8" 1-1/4" 1-1/2" Web:
15 FLAT WASHER GALVANIZED, BLACK, YELLOW, HOT DIP GALVANIZED DIN 125, ASTM F-436 SIEZ INNER OUTER THICKNESS (mm) DIA DIA M M M M M M M M M M M M M /60 4 M M M M M M M M M SIEZ INNER OUTER THICKNESS (INCH) DIA DIA 3/16" 5 18/20 1 1/4" /16" / /16" /2" /16" /8" /4" /8" 22 48/49 3 1" /8" /4" /8" /2" /8" /4" " /4" /2" Web: sales@sbn-est.com 15
16 FLAT WASHER BRASS & STAINLESS STEEL. 304 & 316 DIN INNER OUTER THICKNESS (mm) DIA DIA M M M M M M M M M M M M M M M M M M M INNER OUTER THICKNESS (INCH) DIA DIA 3/16" /4" /16" /8" /16" /2" /8" /4" /8" " /8" /4" /2" Web: sales@sbn-est.com 16
17 SPRING WASHER CARBON STEEL & MILD STEEL (GALVANIZED, YELLOW, BLACK, BRASS) STAINLESS STEEL. 304 & 316 DIN (mm) INNER DIA OUTER THICKNESS DIA M M M M M M M M M M M M M M M M M M M M M M INNER OUTER THICKNESS (INCH) DIA DIA 5/32" /16" /4" /16" /8" /16" /2" /16" /8" /4" /8" " /8" /4" /8" /2" /8" /4" /8" " Web: sales@sbn-est.com 17
18 DROP IN ANCHOR MILD STEEL (GALVANIZED, YELLOW, BRASS) & STAINLESS STEEL. 304 & 316 TREADS ANCHOR DIA THREAD DEPTH M M M M M M ANCHOR LENGTH SHIELD ANCHOR ( U.K & HOLLAND TYPE) MILD STEEL (YELLOW) & STAINLESS STEEL. 304 & 316 BOLT EXTERNAL DIA ANCHOR LENGTH M mm 45mm M mm 50mm M mm 60mm M mm 75mm M mm 115mm M mm 130mm RAWL BOLT (BOLT TYPE & NUT TYPE ) GCFHGFHFHGFHG LENGTH EXT DIA ANCHOR (mm) MIN MAX LENGTH M mm 45mm M mm 50mm M mm 60mm M mm 75mm M mm 115mm M mm 130mm M Web: sales@sbn-est.com 18
19 EXPANSION THROUGH BOLT MILD STEEL (GALVANIZED, YELLOW) & STAINLESS STEEL. 304 & 316 LENGTH (mm) DIA MIN MAX M M M M M M M LENGTH (INCH) DIA MIN MAX 1/4" 1-1/2" 4" 5/16" 2" 6" 3/8" 2" 8" 1/2" 2-1/2" 8" 5/8" 3" 8" 3/4" 4" 10" 7/8" 4" 10" 1" 5" 12" SLEEVE ANCHOR NUT TYPE & BOLT TYPE MILD STEEL (GALVANIZED, YELLOW) & STAINLESS STEEL. 304 & 316 LENGTH (mm) OUTER DIA MIN MAX DIA M M8 M M10 M M12 M M16 M M20 M M24 M M30 Web:
20 EXPANSION BOLTS TYPE EYE & HOOK ZINC & YELLOW PASSIVATED LENGTH MIN MAX M M M M M M SELF DRILL ANCHOR CARBON STEEL & MILD STEEL (GALVANIZED, BLACK) (mm) M6 M8 M10 M12 M16 M20 (INCH) 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 7/8" Web:
21 METAL FRAME ANCHOR DRILL (mm) SLEEVE LENGTH (mm) M M M M M M M M M M NYLON FRAME ANCHOR DRILL (mm) SLEEVE LENGTH (mm) SCREWS (mm) M M M M M M NYLON FRAME FIXING ANCHOR LENGTH Web: sales@sbn-est.com 21
22 PLASTIC FISCHER FISCHER NO: #5 #6 #7 #8 #10 #12 #14 #16 NYLON WING TOGGLE SMALL MEDIUM LARGE MOLLY ANCHOR (HOLLOW ANCHOR) M4 25 M4 38 M45 45 M4 52 M4 65 M5 45 M5 58 M5 71 M5 88 M6 45 M6 58 M6 71 M6 88 M8 71 Web:
23 FULLY THREADED BAR CARBON STEEL & STAINLESS STEEL. 304 & 316 NATURAL COLOR B-7, B-8, B-8M LENGTH: ONE, TOW & THREE METERS EACH DIAMETER (mm) M4 M5 M6 M8 M10 M12 M14 M16 M18 M20 M22 M24 M27 M30 M33 M36 M39 M42 M45 M48 PITCH DIAMETER (mm) 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 7/8" 1" 1-1/8" 1-1/4" 1-3/8" 1-1/2" 1-5/8" 1-7/8" 1-3/4" 2" 2-1/4" 2-1/2" 2-3/4" 3" PITCH Web: sales@sbn-est.com 23
24 STUD BOLT WITH TWO HEAVY HEX NUTS CARBON STEEL & ALLOY STEEL ASTM A193, B7, B7M, L7, B16, B8, B8M DIA (mm) M10 M12 M16 M20 M22 M24 M27 M30 M33 M36 M39 M42 M45 M48 M52 M56 M60 M64 M68 LENGTH MIN MAX DIA (INCH) 1/2" 5/8" 3/4" 7/8" 1" 1-1/8" 1-1/4" 1-3/8" 1-1/2" 1-5/8" 1-3/4" 1-7/8" 2" 2-1/4" 2-1/2" 2-3/4" 3" 3-1/2" LENGTH MIN MAX 2-1/2" 6" 2-1/2" 8" 3" 10" 3-1/2" 10" 3-1/2" 11" 4" 12" 4/2" 14" 5" 16" 5" 18" 6" 20" 6" 22" 6" 22" 7" 25" 9" 26" 9" 28" 12" 28" 14" 28" 15" 28" NATURAL COLOR ELECTRO GALVANIZED, HOT DIP GALVANIZED YELLOW & STAINLESS STEEL. 304 & 316 Web:
25 THREADED ROD CARBON STEEL & MILD STEEL (GALVANIZED, GR-4.6, BLACK. GR-8.8) BRASS & STAINLESS STEEL. 304 & 316 LENGTH :- ONE, TWO & THREE METERS LENGTH DIAMETER (mm) M4 M5 M6 M8 M10 M12 M14 M16 M18 M20 M22 M24 M30 M33 M36 M39 M42 M45 M48 M52 M56 M60 M64 PITCH DIAMETER (INCH) 1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8" 3/4" 7/8" 1" 1-1/8" 1-1/4" 1-1/2" 1-3/4" 1-7/8" 2" 2-1/2" 2-3/4" 3" PITCH Web: sales@sbn-est.com 25
26 CHEMICAL ANCHOR STUDS CARBON STEEL & MILD STEEL & STAINLESS STEEL. 304 & 316 M8 110 M M M M M M DRILL DIA 10mm 12mm 14mm 18mm 25mm 28mm 35mm DRILL DEPTH 8mm 90mm 110mm 125mm 170mm 210mm 280mm DOUBLE END STUDS GALVANIZED, BLACK & YELLOW BOLT M6 M8 M10 M12 LENGTH (mm) MIN MAX PITCH BOLT 5/16" 3/8" 7/1"6 1/2" LENGTH (INCH) MIN MAX 1-1/2" 2-1/2" 1-1/2" 2-1/2" 1-1/2" 3" 2" 3" PITCH Web: sales@sbn-est.com 26
27 FOUNDATION ANCHOR BOLTS CARBON STEEL & MILD STEEL (BLACK, HOT DIP GALVANIZED, GALVANIZED) STAINLESS STEEL. 304 & 316 L- TYPE J- TYPE LENGTH DIA(mm) MIN MAX M M M M M M M M M M M M M M LENGTH DIA(INCH) MIN MAX 3/8" 4" 16" 1/2" 4" 24" 9/16" 6" 32" 5/8" 6" 32" 3/4" 8" 48" 7/8" 10" 40" 1" 12" 48" 1-1/8" 20" 48" 1-1/4" 24" 48" 1-3/8" 28" 48" 1-1/2" 32" 56" 1-3/4" 32" 56" 2" 32" 56" Web:
28 PIPE CLAMPS MILD STEEL (ZINC PLATED) & STAINLESS STEEL. 304 &316 PIPE NUT 1/2" M8/M10 3/4" M8/M10 1" M8/M10 1-1/4" M8/M10 1-1/2" M8/M10 2" M8/M10 2-1/2" M10/M12 3" M10/M12 4" M10/M12 5" M10/M18 6" M12/M16 8" M16 CLEVIS HANGER (INCH) 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 5" 6" 8" 10" 12" Web:
29 U BOLTS CARBON STEEL & MILD STEEL (GALVANIZED, HOT DIP GALVANIZED) & STAINLESS STEEL. 304 & 316 PIPE PIPE R M6. W1/4" M8. W5/16" M10. W3/8" M12. W1/2" M16. W5/8" M20. W3/4" OD P H E P H E P H E P H E P H E P H E 1/4" /8" /2" /4" " /4" /2" " /2" " /2" " " " " " " " " " " Web: sales@sbn-est.com 29
30 TOOTHED LOCK WASHER (EXTERNAL & INTERNAL) CARBON STEEL & MILD STEEL (YELLOW, HOT DIP GALVANIZED, BRASS) STAINLESS STEEL. 304 & 316 INNER OUTER THICKNESS (mm) DIA DIA M M M M M M M M M M M STAR NUTS CARBON STEEL & MILD STEEL ( ZINC PLATED) & STAINLESS STEEL. 304 & 316 (mm) M6 M8 M10 M12 M14 M16 M18 M20 M22 M24 M27 M30 (INCH) 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 7/8" 1" Web: sales@sbn-est.com 30
31 ALUMINUM, STAINLESS STEEL. RIVETS DIN LENGTH (METRIC) DRILL DIA MIN MAX M M M M SPLIT PINS (COTTER PINS) MILD STEEL (ZINC PLATED, BLACK, HOT DIP GALVANIZED) & STAINLELSS STEEL. 304 & 316 DIN 94 STEEL RIVETS LENGTH (mm) DIA MIN MAX M M M M M M M M M M M MILD STEEL (BLACK, GALVANIZED) DIN 660 LENGTH DIA MIN MAX M M M M M M M M M Web: sales@sbn-est.com 31
32 Turnbuckles COMMERCIAL TYPE TURNBUCKLES WITH HOOK AND EYE, zinc plated ART.NO. mm W.L.L. kgs TOTAL LINGTH mm BODY LINGTH mm N.W. kg RL RL RL RL RL RL RL RL T TURNBUCKLES DIN 1480 WITH HOOK & EYE OR WITH PLATES, zinc plated ART.NO. mm W.L.L. N TOTAL LINGTH mm BODY LINGTH mm N.W. Kg100PCS RL M RL M RL M RL M RL M RL M RL M RL M RL M ITALIAN TYPE MALLEABLE TURNBUCKES, zinc plated ART.NO. mm B mm C Mm ØF Mm N.W. Kg RL M RL M RL M RL M RL M RL M RL M JIC FRAME TYPE TURNBUCKLES WITH EYE AND HOOK,self clolrd or zinc plated ART.NO. mm T.L. ton BODY LENGTH mm N.W. Kg RL RL RL RL RL RL RL RL RL Web: sales@sbn-est.com 32
33 Chain & Wire Rope Accessories Forged EYE SCREW DIN 580, ZP ART. NO Mm W.L.L. Kgs N.W. Kg/100pc RL RL RL RL RL RL RL RL RL RL RL RL RL EYE NUT DIN 582,ZP ART. NO Mm W.L.L. Kgs N.W. Kg/100pc RL RL RL RL RL RL RL RL RL RL RL RL EYE SCREW JIS B 1168,ZP ART. NO Mm W.L.L. Kgs N.W. Kg RL RL RL RL RL RL RL EYE NUT JIS B 1169, ZP ART. NO Mm W.L.L. Kgs N.W. Kg RL RL RL RL RL RL RL Web: sales@sbn-est.com 33
34 Wire Rope Clips DIN 1142 WIRE ROPE CLIPS, yellow galvanized ART. NO N.W. ART.NO N.W. mm Kg/100PCS mm Kg/100PCS RL RL RL RL RL RL RL RL RL RL RL RL U.S. TYPE MALLEABLE WIRE ROPE CLIPE, zinc plated ART. NO inch N.W. Kg/100PCS ART.NO inch N.W. Kg/100PCS RL / RL ½ RL / RL / RL / RL / RL / RL / RL / RL / RL / RL RL / RL / MEET FEDERAL SPECIFCATION FF-C-450 TYPE 1 CLASS WIRE ROPE CLIP CAST IRON CASE,zinc plated ART. NO mm N.W. Kg/100PCS ART.NO mm N.W. Kg/100PCS RL RL RL RL RL RL RL RL RL RL RL MALLEBLE WIRE ROPE CLIP TYPE A, yellow gavainzed ART. NO mm N.W. Kg/100PCS ART.NO mm N.W. Kg/100PCS RL RL RL RL RL RL RL RL RL RL RL RL RL MALLEBLE WIRE ROPE CLIP TYPE B, zinc plated ART. NO INCH N.W. Kg/100PCS ART.NO INCH N.W. Kg/100PCS RL / RL / RL / RL / RL / RL / RL / RL / RL / RL RL / Web: sales@sbn-est.com 34
35 Shackles JIS TYPE SCREW PIN CHAIN SHACKLE WITH OR WITHOUT COLLAR, zinnc plated ART. NO Mm W.L.L. Kg I.L. mm RL RL RL RL RL RL RL RL RL RL M.B.S. IS 4 TIMES OF W.L.L. JIS TYPE SCREW PIN CHAIN SHACKLE WITH OR WITHOUT COLLAR, zinnc plated ART. NO Mm W.L.L. Kg I.L. mm RL RL RL RL RL RL RL RL RL RL M.B.S. IS 4 TIMES OF W.L.L. N.W kg JIS TYPE SCREW PIN CHAIN SHACKLE WITH COUNTER SUNK HEAD, zinnc plated ART. NO M.B.S. IS 4 TIMES OF W.L.L. Mm W.L.L. Kg I.L. mm RL RL RL RL RL RL RL RL RL RL N.W kg LARGE DEE BS3032 SHACKLE, self colored, zinc plated or hot dip galvanized ART. NO mm PROOF LOAD IS 2 TIMES OF W.L.L. W.L.L. Kg PIN DIA. mm I.L. mm RL RL RL RL RL RL RL RL RL RL RL RL N.W kg Web: sales@sbn-est.com 35
36 Web:
37 THREAD PITCH S METRIC & INCHES METRIC THICKNESS PITCH COARSE FINE THICKNESS PITCH COARSE FINE INCH THICKNESS 3/16" 1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8" PITCH UNC UNF THICKNESS 3/4" 7/8" 1" 1-1/18" 1-1/4" 1-1/2" 1-3/4" 2" 2-1/2" 2-3/4" 3" PITCH UNC UNF Web: sales@sbn-est.com 37
38 ASTM, SAE AND ISO GRADE MARKINGS AND MECHANICAL PROPERTIES FOR STEEL FASTENERS IDENTIFICATION GRADE MARK NO GRADE MARK SPECIFICATION SAE J429 GRADE 8.1 FASTENER DESCRIPTION STUDS MATERIAL MEDIUM CAR BON ALLOY SAE 1041 MODIFIED TEMPERATURE DRAWN STEEL NOMINAL RAGE(IN) 1/4 TH RU 1-1/2 PROOF LOAD (PSI) MECHANICAL PROPERTIES YIELD STRENGTH MIN (PSI) TENSILE STRENGTH MIN (PSI) A4 90 ASTM A490 HIGH STRENGTH STRUCTURAL BOLTS ALLOY STEEL, QUENCHED AND TEMPERED 1/2 TH RU 1-1/ ISO R898 CLASS NO GRADE MARK LOW OR MEDIUM CARBON STEEL ISO R 898 CLASS NO GRADE MARK 8.8 OR 88 ISO R898 CLASS 8.8 BOLTS SCREWS, STUDS MEDIUM CARBON STEEL QUENCHED AND TEMPERED ALL S TH RU 1-1/ OR 109 ISO R898 CLASS 10.9 ALLOY STEEL, QUENCHED AND TEMPERED Web: sales@sbn-est.com 38
39 ASTM SPECIFICATION A 193 ALLOY STEEL BOLTING MATERIALS FOR HIGH TEMPERATURE SERVICE. A 307 LOW CARBON STEEL EXTREMELY AND INTERNALLY THREADED STANDARD FASTENERS. A 320 ALLOY STEEL BOLTING MATERIALS FOR LOW TEMPERATURE SERVICE. A 325 HIGH STRENGTH BOLTS FOR STRUCTURAL STEEL JOINTS INCLUDING SUITABLE NUTS AND PLAIN HARDENED WASHERS. A 354 QUENCHED AND TEMPERED ALLOY STEEL BOLTS AND STUDS WITH SUITABLE NUTS. A 449 QUENCHED AND TEMPERED STEEL BOLTS AND STUDS. A 490 _ Quenched and Tempered alloy bolts for structural Steel joints 1. SAE Specification: J429 Mechanical and Quality Requirements for Extremely Threaded Fasteners. 2. ISO Recommendations: No. R898_ Mechanical Properties of Fasteners Part 1 _ Bolts, Screws and studs 3. Grade 7 bolts and screws are roll threaded after heat treatment. Web: sales@sbn-est.com 39
40 Hexagon Head Structural Bolts DIN 7900 Gr 4.6 & 5.6 Physical Properties Physical Properties Class 4.6 Class 5.6 Bolts size M12 to M 30 M 12 to M 30 Tensile Strength (min.) (N/mm²) Proof Load Stress (min.) (N/mm²) Elongation % on GL = 5.65 A (min) Impact Strength (min) J N/A 25 Recommended Tightening Torques and Induced Loads Thread Size & Pitch Stress Area Property Class 4.6 Property Class 5.6 Torque Induced Load Torque Induced Load mm² Nm N Nm N M M M M M M M Note: The Tightening Torques are calculated to induce stress equal to approximately 70% of Yield Stress. Web: sales@sbn-est.com 40
41 Hexagon Head Bolts/ Screws DIN 931/933 Physical Properties: PROPERTY CLASS Diameters All Diameters All Diameters M16 M16 All Diameters Unit N/mm² N/mm² N/mm² N/mm² N/mm² Tensile Strength, (Min.) Yield Strength, (Min.) Proof Load Stress Shear Strength, (Min.) Hardness Rockwell HR B82-B99.5 B89-B99.5 C22-C32 C23-C34 C32-C39 Elongation % on GL = 5.65 A (min) A=Cross Sectional Area Recommended Tightening Torques and Induced Loads Nominal Thread Size Stress Area Torque Induced Load Torque Induced Load Torque Induced Load Torque Induced Load mm² Nm N Nm N Nm N Nm N M M M M (M14) M (M18) M (M22) M (M27) M M M (M39) M Special Note: The tightening torques are calculated to induce approximate stresses as detailed below: 266N/mm² for Property Class N/mm² for Property Class N/mm² for Property Class 8.8, dia M N/mm² for Property Class 8.8, dia M N/mm² for Property Class 10.9 Web: sales@sbn-est.com 41
42 Hexagon Head Bolts/Screws SAE J 429 Physical Properties Grade 5 Grade 8 Tensile Strength (Min.) psi N/mm² Proof Load Stress psi N/mm² Elongation% on GL=2 (min) 14% 12% Rockwell Hardness HR C25 C34 C33 C39 Reduction of Area % 35% 35% Recommended Tightening Torques and Induced Loads for UNC Threads Nominal Thread Size Stress Area Grade 5 Grade 8 Torque Induced Load Torque Induced Load UNC In² Ft. Ibf Ibf Ft. Ib Ibf 1/ / / / / / / / Recommended Tightening Torques and Induced Loads for UNF Threads Nominal Thread Size Stress Area Grade 5 Grade 8 Torque Induced Load Torque Induced Load UNC In² Ft. Ibf Ibf Ft. Ib Ibf 1/ / / / / / / / Note: The tightening torques are calculated to induce stress equal to approximately 70% of Yield stress. Web: sales@sbn-est.com 42
43 Heavy Hex Structural Bolts ASTM A 325 Inch Series Physical Properties, Tightening Torque Physical Properties Physical Properties Type I Type I Bolt Size 1/2 to 1 11/8 to 11/2 Tensile Strength (min) Psi (N/mm²) (827) (724) Proof Load Stress (min) Psi (N/mm²) (586) (510) Hardness HR C25 C30 C19 C30 Recommended Tightening Torques and Induced Loads Thread Size Stress Area Torque Induced Loads UNC/UN in² Ft-Ib Ibf 1/2-13UNC /8-11UNC /4-10UNC /8-9 UNC UNC /8-8UN /4-8UN /8-8UN /2-8UN Note: The Tightening Torques are calculated to induce stress equal to approximately 70% of Yield Stress. Web: sales@sbn-est.com 43
44 Heavy Hex Structural Bolts ASTM A 325 M Metric Series Physical Properties. Tightening Torques Physical Properties Physical Properties Nominal Thread Size Tensile Strength (min) (N/mm²) Proof Load Stress (min) (N/mm²) On GL= 2 Elongation %(min) Reduction of Area % (min) Hardness HR Type 2 M16 to M C23 C34 Recommended Tightening Torques and Induced Loads Thread Size & Pitch M M M M M M Stress Area Torques Induced Loads mm² Nm N Note: The Tightening Torques are calculated to induce stress equal to approximately 70% of Yield Stress. Web: sales@sbn-est.com 44
45 Stud Bolts ASTM A 193 Gr B7 Inch Series UNC/UN Physical Properties. Tightening Torques Physical Properties Physical Properties Diameter Range Grade B7 Tensile Strength (min) psi (N/mm²) Yield Strength (min.) psi (N/mm²) Elongation % on GL = 40 (min) Reduction of Area % (min) 21/2 and under (860) over 21/2 to (795) 21/2 and under (720) over 21/2 to (655) 21/2 and under 16% over 21/2 to 4 21/2 and under 50% over 21/2 to 4 Tightening Torques: Nominal Thread Size Stress Area GRADE B7 Nominal GRADE B7 Stress Thread Area INDUCE TORQUE INDUCE LOAD Size TORQUE LOAD UNC 8 UN in² ft Ib Ibf UNC 8 UN in² Ft Ib Ibf 1/ / / / / / / / / Note: 11/ / / / / / / / / / / / / / / / The Tightening torque are calculated to induce stress equal to approximately 70% of yield stress. Web: sales@sbn-est.com 45
46 Hexagon Nuts SAE J 995 Note: 1. The nuts will generally conform to ANSI/ASME B Threads will conform to Class 2B of ANSI B Material & Heat Treatment: 3. To achieve mechanical properties of Grade 5 or 8 of SAE J995 which conform the requirements of ASTM A 563 Grade B or D. SAE J995 Gr.2 also conform the requirements of ASTM A563 Grade A. 4. In Bolts/Nut assembly, tightening should be done by rotation of nut. Torque values as recommended in tables of bolts. 5. All dimensions are in inches. Physical Properties: Grade Size For use with bolts of Grade Proof Load Stress Psi Rockwell Hardness HR 2 1/4-1 1/2 5 1/4-1 SAE Gr. 2 ASTM A 307 A,C SAE Gr C32 (max) C32 (max) 8 1/4-5/8 C24 C32 SAE Gr /4-1 C26 C34 Web: sales@sbn-est.com 46
47 Hexagon Nuts DIN 934 Metric series Dimensions. Physical Properties Note: 1. The nuts will generally conform to ISO 4032, DIN 934, also DIN Threads will conform to Class 6H of ISO 965/2 for coarse Series. 3. Material & Heat Treatment: To achieve mechanical property Class 8 or Nuts of Property Class 8 are used with bolts of Property Class 8.8. Nuts of Property Class 10 are used with bolts of Property Class (In general.nuts of a higher property class can be replace nuts of a lower property class in a joint). 5. In Bolt/Nut assembly, tightening should be done by rotation of nut. 6. Size in brackets are non-preferred standards. 7. All dimensions are in millimeters. Physical Properties: Nut Size Property Class 5 Property Class 6 Property Class 8 Property Class 10 Proof load stress Hardness HR Proof load stress Hardness HR Proof load stress Hardness HR Proof load stress Hardness HR Ma Over To N/mm² Min Max N/mm² Min Max N/mm² Min N/mm² Min Max x M4 M M7 M B71 C B79 C B92 C C26 C36 M10 M M16 M B76 C B85 C B97 C For use 4.6, 5.6,5.8,6.8 and With Bolt of 4.6, 5.6, , 5.6, 5.8, and 10.9 Property Class 8.8 Web: sales@sbn-est.com 47
48 Heavy Hexagon Nuts ASTM A 194 Note: 1. The nuts will generally conform ANSI/ASME B Heavy Hexagon Nuts. 2. Threads will conform to Class 2B of ANSI B Material and Heat Treatment: To achieve mechanical properties of Grade 2H and 4 which Conform the requirements of ASTM A In Bolt/Nut assembly, tightening should be done by rotation of nut. Torque values as recommended in tables for bolts. 5. All dimensions are in inches. Physical Properties: Grade 2H For use with Size Bolts/Stud Bolts of Grade Up to 11/2 incl. ASTM A325 T-1 ASTM A193 B7 Over 11/2 ASTM A307 B Proof Load Stress Psi 175,000 Rock well Hardness HR C24 C38 B95 C38 4 All Sizes ASTM A320 L7 175,000 C24 C38 Web: sales@sbn-est.com 48
49 Heavy Hexagon Nuts ASTM A 563M Metric Series Dimensions Physical Properties Note: 1. The nuts will generally conform to ANSI B M- Metric Heavy Hexagon Nuts. 2. Threads will conform to Class 6H of ANSI B 1.13 for Coarse Series. Material & Heat Treatment: 3. To achieve mechanical properties of Property Class 8S or 10S of ASTM A563M. 4. Nuts of Property Class 8S are used with bolts of ASTM A325M Type 1 and 2 (con-coated). Nuts of Property Class 10S are used with bolts of ASTM A325M Type 1 and 2 (Zinc-coated) (in general nuts of a higher Property class can replace nuts of a lower property class in a joint). 5. In Bolt/Nut assembly, tightening should be done by rotation of nut. 6. Sizes in brackets are non-preferred standards. 7. All dimensions are in millimeters. Physical Properties: Property Class 8S 10S For use with Bolts of type and finish ASTM A 325M Type 1 and 2 (non-coated) ASTM A 325M Type 1 and 2 (zinc-coated) Proof Load Stress N/mm² Rockwell Hardness HR B89 C (Normal Tapping) (Oversize Tapping) C26 C38 Web: sales@sbn-est.com 49
50 Our Location Lutfy Supply Center Fuel Station kanoo Insurance Building Abdulateef Furniture Bghlaff For Marble Saudi Gases Al-Shagdali Est. Al- watania Poultry Web:
DESCRIPTION. Stud Bolts for Pressure-Temperature Piping 2-1. General Purpose End-to-End Studs 2-2. Tap End Stud Bolts 2-3. Double End Stud Bolts 2-4
DESCRIPTION PAGE B7 Studs and Nuts Stud Bolts for Pressure-Temperature Piping 2-1 General Purpose End-to-End Studs 2-2 Tap End Stud Bolts 2-3 Double End Stud Bolts 2-4 Sigma Fasteners, Inc. Section 2 STUD
More informationFasteners and screw threads
ISO Standards Handbook: Fasteners and screw threads Volume 2: Product standards Contents Part 3 : Product standards 2001, Ed. 5, 1094 p., ISBN 92-67-10345-8 3.1 External drive hexagon head bolts and screws
More informationMetric System & Specifications
Metric System & Specifications Throughout history, people have been trying to limit the number of measurement systems. Today, only two systems, inch-pound and metric, are predominate in most industrial
More informationManufacturing, Supply & Quality Plan for Tower Bolts. SL Tower Bolt Market Penetration
Manufacturing, Supply & Quality Plan for Tower Bolts Project: SL Tower Bolt Market Penetration Document History Version Date Original Document First Submission Feb 9, 2013 Rev1 Requested Revisions Comments
More informationStructural Bolting. Notice the Grade 5 has a much smaller head configuration and a shorter shank then the A325 structural bolt. Rev.
Structural Bolting ASTM A325 and ASTM A490 are the two U.S. standard structural bolts. When looking at the mechanical requirements of bolts it appears that an ASTM A325 and SAE J429 Grade 5 are identical
More informationTelescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001
Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator 2945 A 1" SQUARE STEM 9" MAX. = 10" MIN. = 7" FIELD ADJUSTMENT INSTRUCTIONS 1. Remove the top section from
More informationMachine devices, jig devices
Machine devices, jig devices 853 K0697 Rolled thread studs DIN 6379 Material: Tempered steel. KIPP Rolled thread studs DIN 6379 Order No. D L B1 B2 Approx. weight g Surface finish: Thread rolled. Class
More informationEMP Part # Categor Description
EMP Part # Categor y Description Qty Available as of 01/03/13 Cost/C 001014 SHC 1/4-20x1/2 J429 GR 5 Hex Hd Cap Screw Zinc Yellow 3,300 $1.41 001079 SHC 1/4-20x1 1/4 J429 GR 8 Hex Hd Cap Screw Black Oxide
More informationKIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
More informationTARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
More informationMachine Screws, Dowel Pins and Hardware
Machine Screws, Dowel Pins and Section Contents Plain Socket Head Screws...Page 13-2 Wire Locking Screws...Page 13-3 Captive Screws...Page 13- Ventilation Screws...Page 13- Shoulder Screws...Page 13-
More informationTwo most common lock nut groups: 1-Prevailing Torque Type Lock Nuts:
Two most common lock nut groups: 1. PREVAILING TORQUE a design feature of the lock nut produces friction between threads of mated components thereby increasing the force needed to tighten as well as loosen
More informationHilti, Inc. 5400 South 122 nd East Avenue Tulsa, OK 74146. 1-800-879-8000 www.hilti.com
Attached are page(s) from the 2014 Hilti North American Product Tech Guide. For complete details on this product, including data development, product specifications, general suitability, installation,
More informationPOWERS Controls No. 4 Pneumatic Damper Actuator
POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000
More informationSECTION 15140 - PIPE HANGERS AND SUPPORTS
Part I - GENERAL 1.01 SECTION INCLUDES A. The work covered under this section consists of the furnishing of all necessary labor, supervision, materials, equipment, and services to completely execute the
More informationPipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More informationINDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED
INDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED Available in Sizes B C D E See Page 6 for Dimensions Kennedy Valve/Indicator Posts 17-1 INDICATOR POST STYLE 2945 A TELESCOPING
More informationHOSE, TUBE, AND PIPE CLAMPS
hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 2 HOSE, TUBE, AND PIPE CLAMPS TABLE OF CONTENTS Introduction 3 Construction 3 Application 3 Mounting 3 Standard Duty Clamps (HRL) Arrangements 4 Dimensions
More informationAcero Inoxidable 304 Perno Cabeza Hexagonal Rosca Entera Stainless Steel 304 Hex Cap Screw Full Thread
Perno Cabeza Hexagonal Rosca Entera Hex Cap Screw Full Thread Dimensiones: ANSI B 18.2.1 Rosca: UNC ANSI B 1.1 y BSW BS 84 Dimensions: ANSI B 18.2.1 Thread: UNC ANSI B 1.1 and BSW BS 84 Prices in US$ -
More informationC O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
More informationTECHNICAL SPECIFICATION FOR HIGH TENSION LINE HARDWARE AND ACCESSORIES FOR ACSR PANTHER & WOLF CONDUCTOR
TECHNICAL SPECIFICATION FOR HIGH TENSION LINE HARDWARE AND ACCESSORIES FOR ACSR PANTHER & WOLF CONDUCTOR 1.1.0 SCOPE : This specification covers design, manufacture, testing at manufacture s works before
More informationScrew Thread Design. Rev. 3-4-09
Screw Thread Design Screw Thread Fundamentals A screw thread is defined as a ridge of uniform section in the form of a helix on either the external or internal surface of a cylinder. Internal threads refer
More informationFastener Handout. Introduction: Engineering Design Representation 2. Threads 2. Local Notes (callouts) 8. Threaded Mechanical Fasteners 13
Fastener Handout Introduction: Engineering Design Representation 2 Threads 2 Effect of thread angle on strength: 3 Standardization of Threads: 4 Descriptions of the Thread Series: 4 Class fit: 5 Specification
More informationAlternative Steel Materials to BS 5950
BC 1: 2008 Design Guide on Use of Alternative Steel Materials to BS 5950 BCA Sustainable Construction Series 3 The education and research arm of the Building and Construction Authority 200 Braddell Road
More informationIs your concept unique?
wirerodsystems STRUCTURAL structural residential landscape coercial retail Sta-Lok Terminals Ltd are one of the world s leading manufacturers of stainless steel fittings for wire ropes, rods & fabricated
More information4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves
1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire
More informationRING JOINT SYSTEMS 207
RING JOINT SYSTEMS 07 08 Table of Contents Model R-88 Pages 10-11 Model R-88 Large Diameter Page 1 Model RH-1000 1000 PSI Coupling Page 13 Model RX-3000 3000 PSI Coupling Page 1 Model RX-3770 3770 PSI
More informationHow To Run A Test Lab In Rourkela
TESTING LABORATORY ROURKELA 1. Background: Keeping in view of the growing demand of quality of the products of the industries, Govt. has established Testing Laboratory, Rourkela, under the Directorate
More informationGuide rail bracket (for adjustable heads)
(for adjustable heads) Part. 209 40 ø,5 ø10,5 2 2,5 115 15 42 5 11 37 72 4 70 Code 209 / 0754 MATERIALS: Bracket made out of reinforced polyamide black colour. FEATURES: To be used with heads Part.221,
More informationSTANDARD SPECIFICATIONS SECTION 05500 METAL FABRICATIONS
STANDARD SPECIFICATIONS SECTION 05500 METAL FABRICATIONS PART 1 GENERAL 1.1 DESCRIPTION A. Section includes requirements for providing metal fabricated items like castings, gratings, hatchways, ladders,
More informationAfrica s leading steel supplier CATALOGUE TUBE & PIPE. The Macsteel Group - Africa s leading steel supplier - www.macsteel.co.za
Africa s leading steel supplier CATALOGUE TUBE & PIPE - www.macsteel.co.za TUBE & PIPE CONTENTS 1. Contents 13. Conveyance SANS 1182 - Light Page 7 2. Contact Details 14. Conveyance SANS 719 - Large Bore
More informationPPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium
More informationRPS - sales@rpssolar.com - 858 755 4505-12478 San Bruno Cove, San Diego, CA 92130
RPS - sales@rpssolar.com - 858 755 4505-2478 San Bruno Cove, San Diego, CA 9230 SWH Solar Mount Rail R-MR-SW-SR-0.5, R-MR-SW-SR-2, R-MR-SW-SR-4, R-MR-SW-SR-4B, R-MR-SW-SR-7 Part No. MR-SW-SR-0.5, MR-SW-SR-2,
More informationPIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification. 96 B. Riutta
PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification Number: 3503-11.2.610 Rev. 2 Rubber Lined Steel Pipe and Fittings Mechanically Coupled Plain End Type System Issued Revised Approved
More informationCaps STANDARD WEIGHT Inches / Pounds
Standard Caps you are here: Home > Weldbend Catalog > Fittings > Caps Caps STANDARD WEIGHT Inches / Pounds For Metric Units >Click Here Nominal Pipe Size Outside Inside Wall Thickness (T) Length (E) Pipe
More informationNordson Automatic Spray Gun Support Kits
Nordson Automatic Spray Gun Support Kits Customer Product Manual Issued / For parts and technical support, call the Finishing Customer Support Center at (800) -99. This document is subject to change without
More informationGUARDRAIL POST STEEL
GUARDRAIL POST STEEL Guardrail posts meeting materials certification are evaluated and checked for: 1. Dimensional acceptance 2. Physical test results a. Chemical b. Physical 3. Galvanized or painted coating
More informationEnsat. Self-tapping inserts SOLID BODIES LINE
Ensat Self-tapping inserts SOLID BODIES LINE Index DESCRIPTION Page Presentation 3 Materials and Applications 4 Features 5 Preparing the receiving hole 6 Tools Codes 7 Ensat Series 302 Ensat Series 303
More informationMachinery's Handbook 27th Edition TABLE OF CONTENTS FASTENERS
TABLE OF CONTENTS FASTENERS NAILS, SPIKES, AND WOOD SCREWS 1476 Wire Nails and Spikes 1477 Wood Screws RIVETS AND RIVETED JOINTS 1478 Riveted Joint Design 1478 Classes and Types of Joints 1478 General
More informationInstallation guide for the SafeLine type anchorage device. Tested in compliance with EN 795: 1996. No.: SE-...
Installation guide for the SafeLine type anchorage device Tested in compliance with EN 795: 1996 No.: SE-... Version: 09.10.2008 SE 67 Subject to technical alterations! Contents 1. General information
More informationHoist Rings. Sizes and Styles for all your Applications and Requirements. HR-125 The Original. SS-125 Stainless Steel. HR-1000 Heavy Lift
s and Styles for all your Applications and Requirements HR-125 The Origal HR-1000 Heavy Lift SS-125 Staless Steel HR-100 Pivot HR-125C Grade 8 Cha HR-125W Web HR-1200 Side Pull HR-500 Trench Cover English
More informationRIGGING HARDWARE ASME B30.26. Addresses detachable lifting hardware for lifting purposes
RIGGING HARDWARE ASME B30.26 Addresses detachable lifting hardware for lifting purposes Adjustable Hardware (Turnbuckles, Eye nuts, Swivel Hoist Rings and Eyebolts Compression Hardware (Wire Rope Clips
More informationElo Touch Solutions Wall-mounting Kit for the 5501L IDS Touchmonitors
Installation Manual Elo Touch Solutions Wall-mounting Kit for the 5501L IDS Touchmonitors SW602206 Rev B Table of Contents Chapter 1: Safety Warning... 3 Chapter 2: Kit Contents... 4 Included in Kit...
More informationWorking Drawing and Assemblies. Chapter 10
Working Drawing and Assemblies Chapter 10 Objectives 1.Define working drawings. 2. Describe how working drawings are used in industry. 3. List the major components of a complete set of working drawings.
More informationSliding and Folding Door Fittings Sliding Door Accessories
Sliding door lock Toplock For 1- and 2-leaf sliding doors Suitable for toughened safty glass and laminated sheet glass Suitable for DIN left and DIN right Max. weight per door leaf 120 kg For glass thickness:
More informationMÁQUINAS AGRÍCOLAS JACTO S.A. EDITION
AJ English version EDITION - 06/007 CODE - 9790 Parts catalog MÁQUINAS AGRÍCOLAS JACTO S.A. Rua Dr. Luiz Miranda, 650 7580-000 - Pompéia - SP - Brasil Tel.: +55 4 3405-00 - Fax: +55 4 345 306 E-mail: export@jacto.com.br
More informationlindab duct suspension & support system Duct suspensions & Support systems
lindab duct suspension & support Duct suspensions & Support s lindab duct suspension & support Content Duct suspensions & Support s Duct suspension Duct suspension FB... DRSN... 0 DRSNR... 0 Channels and
More informationMACHINE DRAWING QUESTION BANK. 2. What are the parts not usually sectioned? (Nov 04)
MACHINE DRAWING QUESTION BANK UNIT-I 1. Answer the following: Sketch a i. Hexagonal nut convention, ii. Convention of a stud bolt. (Nov 04) 2. What are the parts not usually sectioned? (Nov 04) 3 Answer
More informationOur sales are dedicated to large industries ( 80%) and trading ( 20%).
1 Located in the heart of Lorraine, about 1 km from the A31 highway, the company is in the center of Europe. Any french destination can generally be delivered within 24 hours or within 48 hours maximum.
More informationFastener Handout. Introduction: Engineering Design Representation 2. Threads 2. Local Notes (callouts) 8. Threaded Mechanical Fasteners 13
Fastener Handout Introduction: Engineering Design Representation 2 Threads 2 Effect of thread angle on strength: 3 Standardization of Threads: 4 Descriptions of the Thread Series: 4 Class fit: 5 Specification
More informationM113 VEHICLE FAMILY RUBBER TRACK INSTALLATION INSTRUCTIONS SOUCY TRACK SYSTEM 04-M113-1ENS (SPLIT IDLER) Litho d in Canada 1 04-M113-1ENS
M113 VEHICLE FAMILY RUBBER TRACK INSTALLATION INSTRUCTIONS (SPLIT IDLER) 1 # TABLE OF CONTENTS List of parts and tools................................................3 Installation of complete kit...................................................5
More informationISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24
Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical
More informationSection M POWER LIFTS
Section M POWER LIFTS December 2009 1M Index 1. 53-520244-000 Poly V Idler Assembly 2. 53-520205-000 N.A. Mounting Bracket 3. 53-520212-000 Cable Assembly 4. 53-600149-000 Wire Harness Assembly 5. 53-860322-010
More information08003-1 WATER SERVICE 2
08003_Mar08_2011.pdf Page 1 of 7 INDEX Page 08003-1 WATER SERVICE 2 1.1 Pipe 2 1.1.1 Copper 2 1.1.2 Polyethylene 2 1.2 Valves and Fittings 2 1.2.1 Main Stops 3 1.2.2 Curb Stops 3 1.2.3 Curb Box 3 1.2.4
More informationJames M. Pleasants Company
James M. Pleasants Company SUBMITTAL DATA GAINESVILLE MECHANICAL DECEMBER 20, 2013 PROJECT: GSU: J-183 HUMANITIES LAW BLDG. QUOTE NO:12116 ENGINEER: STEVENS & WILKINSON GASKETED PLATE HEAT EXCHANGER Tag:
More informationGAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today
More informationHilti HIT-V and HAS Threaded Rod and Hilti HIT-Z Anchor Rod
, Monday, HAS March and HIT-Z 24, 2014 Hilti Rod Specifications and Technical Data Hilti and HAS Threaded Rod and Hilti HIT-Z Rod Specifications and Technical Data Hilti has provided threaded rod for many
More informationSECTION 33 11 00.15 DUCTILE IRON PIPE AND FITTINGS
SECTION 33 11 00.15 DUCTILE IRON PIPE AND FITTINGS PART 1: GENERAL 1.01 COORDINATION OF WORK Connection to existing pipelines may require shutdown of AW facilities. Closely coordinate construction work
More informationUNITED STATES CUTTING TOOL INSTITUTE Product Groupings for Standards Activities CUTTING TOOL PRODUCTS
CUTTING TOOL PRODUCTS 1. BORING ISO 5609 Boring bars for indexable inserts Dimensions ISO 6261 Boring bars (tool holders with cylindrical shank) for indexable inserts Designation JIS B 4128 Boring bars
More informationSECTION 26 05 49 VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS
SECTION 26 05 49 VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes seismic restraints and other earthquake-damage-reduction measures for electrical
More informationChief S21M PARTS MANUAL. 2005 Chief Automotive Technologies
Chief SM 00 Chief Automotive Technologies Chief s Limited One-Year Warranty & Liability CHIEF'S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Technologies, Inc. warrants for one year from date
More informationRollers. from the UK s largest roller manufacturer. Quality Performance Reliability
Rollers from the UK s largest roller manufacturer Quality Performance Reliability 42 Index Gravity Rollers Light to Medium Duty 4 Heavy Duty 5 Plastic Rollers 6 Stainless Steel Rollers 7 Grooved Rollers
More informationVersion. BBI products and services offered exclusively through distribution
2013 Version BBI products and services offered exclusively through distribution Terms and Conditions of Sale GUARANTEE: All Brighton-Best International, Inc. products are manufactured to rigid quality
More informationLift-off hinge. Rising hinge. Standard hinge. Heavy duty hinge. Parliament hinge. Spring hinge. Double action spring hinge. Concealed mortise hinge...
Door Hinges Contents Butt hinges Lift-off hinge Rising hinge Standard hinge Heavy duty hinge Parliament hinge Spring hinge Double action spring hinge Concealed hinges Concealed mortise hinge... Pivot
More informationDock Hardware & Accessory Products Catalog
Dock Hardware & Accessory Products Catalog Product Page # Product Page # Angle Brackets/Clips 8 Back Up Plate 5 Backing Plate/Hurricane Stop 10 Carriage Bolt Sets 4 Chain Retainer 10 Connector Pin Set
More information3M Mobile SkyWalk Series Horizontal Lifeline Product Return Form
3M Mobile SkyWalk Series Horizontal Lifeline Product Return Form THIS FULLY COMPLETED DOCUMENT MUST BE INCLUDED WITH EACH RETURN SHIPMENT IN ORDER FOR CREDIT TO BE ISSUED. ALL CREDITS WILL BE ISSUED TO
More informationHUS-A 6 / HUS-H 6 / HUS-I 6 / HUS-P 6 Screw anchor in precast prestressed hollow core slabs
HUS-A 6 / HUS-H 6 / HUS-I 6 / HUS-P 6 Screw anchor in precast Anchor version HUS-A 6 Screw with hex head HUS-H 6 Screw with hex head HUS-I 6 Screw with hex head Benefits - Quick and easy setting - Low
More informationBUMAX. REYHER your partner for the BUMAX range
BUMAX high-tensile stainless steel fasteners REYHER your partner for the BUMAX range Strongest stainless steel fasteners in the world BUMAX 88 and BUMAX ready for delivery from stock Wide range of BUMAX
More informationSECTION 15105 DUCTILE IRON PIPE AND FITTINGS
SECTION 15105 DUCTILE IRON PIPE AND FITTINGS PART 1 GENERAL.01 COORDINATION OF WORK Connection to existing pipelines may require shutdown of Owner facilities. Closely coordinate construction work and connections
More informationHAND PALLET TRUCK Lift-Rite
HAND PALLET TRUCK Lift-Rite Before you Order: To ensure that you get the correct parts, be certain whether your L-50 pallet truck is a standard model or one of the loweredheight models (MINI or CHEP).
More informationTZ WEDGE ANCHOR FOR CRACKED AND UNCRACKED CONCRETE
SECTION 2.2 PAGE 1 / 9 l DESCRIPTION UCAN TZ torque controlled mechanical expansion wedge anchors have a Category 1 classification. They are used to resist static, wind and seismic tension and shear loads
More informationSubmittal Information
Wedge SPECIFIED FOR ANCHORAGE INTO CONCRETE Wedge anchs feature a stainless steel expansion clip, threaded stud body, nut and washer. Anch bodies are made of plated carbon steel, hot-dipped galvanized
More informationSERIES ASM NEOPRENE/EPMD FLANGED SINGLE SPHERE CONNECTOR CONNECTORS. Pressures to 225 PSIG (15.51 barg) Temperatures to 230ºF (110ºC)
APPLICATIONS Process Industry Weak Acids Alkalies Compressed Air Pulp & Paper MODELS ASM - Flanged Connection OPTIONS Control Rods Oil & Gas Water & Waste Pump suction & discharge Sea water Chemical lines
More informationCopper and Copper Alloy Tube, Pipe and Fittings
Copper and Copper Alloy Tube, Pipe and Fittings COPPER and COPPER ALLOY TUBE and PIPE Seamless Copper Pipe: Copper pipe is almost pure copper manufactured to the requirements of ASTM B 42 - Standard Specification
More informationproduces and delivers products worldwide can provide the optimal are dedicated to supplying you with superior advice and global support.
www.ppcinsulators.com The very Best. The very Best. That s what we deliver. ong od Insulators Only a company that develops, produces and delivers products worldwide can provide the optimal solution for
More information60.12. Depend-O-Lok FxE Expansion Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date. DEPEND-O-LOK FxE EXPANSION COUPLING
60.1 D-O-L FxE expansion couplings are a bolted, split-sleeve design that provides for expansion and contraction at the coupled joint. These couplings are furnished with restraint rings that, when affixed
More informationNEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE
B4 NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE AVAILABLE IN CARBON AND STAINLESS STEEL 23 THEORY
More informationSPIRAL STAIR KIT INSTALLATION MANUAL
SPIRAL STAIR KIT INSTALLATION MANUAL Effective January 1, 2014 If you have any questions, please call the location that your Stair Kit was purchased from: Broomall, Pennsylvania 1-800-52-7427 Ontario,
More informationSECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS
SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS PART 1 GENERAL 1.01 SECTION INCLUDES A. The requirements for pipe material and installation in sewer and drainage collection systems. All materials
More informationHALF COUPLER HALF COUPLER
HALF COUPLER HALF COUPLER Lightweight & low profile KUPO professional couplers are constructed from high tensile aluminum extrusion and have been developed for installa ons where load capaci es of up to
More informationEJOT Spiralform. The thread formers for metal. EJOT The Quality Connection
EJOT Spiralform The thread formers for metal EJOT The Quality Connection Imprint Editor: EJOT GmbH & Co. KG Industrial Fasteners Division D 57319 Bad Berleburg Layout and Realisation: EJOT GmbH & Co. KG
More informationSTIHL Precision Series Hand Tools
STIHL Precision Series Hand Tools Spare Parts List A PH 80 Hedge Shear M PP 900/700 Pole Pruner Head Assembly B PL 0 Lopper N PP 900 Pole Pruner Head Parts C PL 0 Lopper O PS 0 Pruning Saw D PL 0 Lopper
More informationIt's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool
It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool H Craft Print Project No. 272 ERE'S a metal bender that will enable you to bend
More informationPITCHED ROOF STRUCTURES
PITCHED ROOF STRUCTURES for framed and frameless photovoltaic modules Needed tools and materials: cordless screwdriver 10mm and 13mm spanners 5mm Allen key bolts, screws and tools for fixing the system
More informationOutdoor Use Waterproof I/O Connectors (Optical / Modular / Electrical) FO-BH, FO-BC, NT5, JN2 / W Series
COMPONENTS PRODUCT INFORMATION RoHS Compliant NEW Outdoor Use Waterproof I/O Connectors (Optical / Modular / Electrical) FO-BH, FO-BC, NT5, JN2 / W Series Optical FO-BH Series (Compact Type) CONNECTOR
More informationDYNA RIDER FOOTBOARD KIT
-J0 REV. 0-0-0 DYNA RIDER FOOTBOARD KIT GENERAL Kit Number 000 Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English
More informationStainless steel grade chart
Stainless steel grade chart ATLAS STEELS METAL DISTRIBUTION Chemical analysis (%) specified C Si Mn P S Cr Mo Ni Other Austenitic stainless steels 253MA S30815 0.05 1.1-2.0 0.8 0.040 0.030 20.0-22.0 10.0-12.0
More informationChief EZ Liner S21 PARTS MANUAL. 1999 Chief Automotive Systems, Inc.
Chief EZ Liner S21 R 1999 Chief Automotive Systems, Inc. CHIEF EZ LINER CHIEF S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Systems, Inc. warrants for one year from date of installation and/or
More informationROV shackles. your reliable partner
ROV shackles your reliable partner Dear Customer, For over 90 years the production of high tensile shackles has been our core business and competence. The designs and quality standards of our wire rope-
More informationRE-ENTERABLE SPLICE CLOSURE KITS. (For Air Core None Pressurized Cable)
Triple T Broadband Public Co., Ltd. Outside Plant Standard Sector Specification No. OES-001-027-04 Issued: RE-ENTERABLE SPLICE CLOSURE KITS (For Air Core None Pressurized Cable) 1. SCOPE 1.1. This specification
More informationSPECIFICATIONS FOR STEEL PIPE
SPECIFICATIONS FOR STEEL PIPE Published pipe standards serve three functions. 1. They dictate manufacturing and testing requirements and prescribed methods of measuring the required mechanical and physical
More informationEarthquake Shake Table Original Design by Casey Hagbo Geophysics Major, Class of 2001
Earthquake Shake Table Original Design by Casey Hagbo Geophysics Major, Class of 2001 Prepared by: Katie Walch, Science Education Specialist Western UP Center for Science, Math, and Environmental Education
More informationINSTALLATION OF A BAY WINDOW
INSTALLATION OF A BAY WINDOW Installation of a Bay Window These instructions relate to the replacement of an existing bay window or replacement of a straight window with a new bay window, in an opening
More informationSpare Parts List Activ A 25C Activ A 30C Activ A 35C Activ A 18S Activ A 25S Activ A 30S
*1756202470* 17562.0247.0 REV3 06/09 2012 Spare Parts List Activ A 25C Activ A 30C Activ A 35C Activ A 18S Activ A 25S Activ A 30S Issue Table description Issue n. of pages Overall view 06/2009 1 C.h.
More informationVeneer Anchors. Masonry Veneer Anchors. Description. Applications
Veneer Anchors Description Dur-O-Wal manufactures and markets a large variety of veneer anchor assemblies designed and engineered to anchor brick, tile, stone or CMU veneer to a wood stud, metal stud,
More informationMAST ARMS & POLES. Ornamental Pole Top & Bases
Ornamental Pole Top & Bases Pelco s decorative pole top and bases help make the traffic signal aesthetically pleasing to the eye. Available for various pole diameters and multiple finish options. Ornamental
More informationSports and High Mast Lighting Poles Phone: (866) 474-7200 Fax: (817) 924-7049
Sports and High Mast Lighting Poles 4 High Mast Lighting Poles General American LitePole offers a raising and lowering system that allows for ease of maintaining the lighting system at ground level. Ideal
More informationSERIES NG 1800 STRUCTURAL STEELWORK
MANUAL OF CONTRACT DOCUMENTS FOR HIGHWAY WORKS VOLUME 2 NOTES FOR GUIDANCE ON THE SPECIFICATION FOR HIGHWAY WORKS SERIES NG 1800 STRUCTURAL STEELWORK Contents Clause Title Page NG 1800 (08/14) General
More informationHose Clamps & Fittings
All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw
More information