Combined Pressure and Temperature. All Titanium Ultra Light Sensor

Transcription

1 PCM120 (former PT1910) PRESSURE & TEMPERATURE SENSOR Combined Pressure and Temperature Built in Electronic with 0,5 to 4,5Vdc Output All Titanium Ultra Light Sensor Temperature Output Direct from PT100 or PT1000 MINIATURE High Temperature Capability, -40 to +140 C Technical Specifications Pressure Ranges (FS) Type Safe Overload / Burst Pressure Power Supply Consumption Output at -100%FS (only for ± range) Output at 0%FS Output at 100%FS Zero and Sensitivity settings tolerances Combined Non Linearity & Hysteresis (P) Thermal probe Combined Non Linearity & Hysteresis (T C) Non Repeatability Signal Bandwidth (electronic) Insulation Operating Temperature Combined thermal zero & sensitivity shifts Long Term Stability Constant acceleration in linear vibrations Mechanical Shock Electrical Protection EMC Protection Standard Electrical Connection Standard Mechanical Connection Material(s) of Wetted Parts Weight Enclosure Protection Accessories delivered with the sensor PCM123 PCM127 5 / 10 / 20 / 40 / 100 / 250-1/+4 ; -1/+9 70 / 150 / 300 / 500 / 1500 / ,5/+60 ; -14,5/+140 Absolute, Gage, Sealed Gage (for ranges > 40) 150%FS / 300%FS 5Vdc ± 10mV 8 to 16Vdc < 10mA 0,5Vdc 0,5Vdc 4,5Vdc ± 50mV ± 0,25%FS ± 0,1%FS PT100 Class A PT1000 Class A ± 0,1%FS ± 0,02%FS typ. -3dB Up to -3dB > 50Vdc 0 to +60 C / 32 to +140 F -25 to +85 C / -13 to +185 F -25 to +125 C / -13 to +257 F -40 to +125 C / -40 to +257 F -40 to +140 C / -40 to +284 F ± FS/ C ± FS/ C ± 0,1%FS/year typ. ± 0,02%FS/g (frequency Hz, 50g max.) 100g ½ sinus 1ms Protected against polarity inversion Compliant to EN m Teflon Jacketed Shielded Cable Ø3,4mm, 5 wires AWG26 M10x1 male M8x1 male Titanium TA6V (1.444) 10g without cable IP65 for Sealed Gage & Absolute Viton O-ring 7,65x1,63 (standard) Calibration certificate or Datas in pressure and temperature (ion) Specifications subject to change without notice

2 PCM120 O-ring 7,65x1,63 Hex. 13 Cable Ø12.7 PRESSURE & TEMPERATURE SENSOR CAPTEUR PRESSION & TEMPERATURE M10x O-ring 6,2x1,5 Ø12.7 Hex. 13 Cable M8x PLAN / DRAWING SCALE 1:1

3 PCM120 ORDER CODE Complete Reference PCM12 X - X - XXX - XXX - XX - XX - XX - X X X - XX Model Pressure sensor for Combined Measurements PCM Ø 12mm 12 Output Signal 0,5-4,5Vdc (ratiometric) 3 0,5-4,5Vdc 7 Material of wetted parts Titanium T Pressure Ranges Unidirectional example : Bidirectional example : -1/+4-1/4 Pressure Unit Operational Mode Gage Sealed Gage Absolute Mechanical Thread G SG A M10x1 male 02 M8x1 male 03 Electrical Connection Teflon cable output X meter(s) 09/Xm 0 to +60 C / 32 to +140 F A -25 to +85 C / -13 to +185 F B -25 to +125 C / -13 to +257 F C -40 to +125 C / -40 to +257 F D Accuracy ± 0,25%FS (Standard) 0 ± 0,1%FS () 1 Thermal Shifts ± FS/ C (Standard) 0 ± FS/ C () 1 s N/A Hz -3dB B EPDM O'Ring E PT1000 Thermal Probe C

4 PCM160 (former PT970) PRESSURE & TEMPERATURE SENSOR Combined Pressure and Temperature Built in Electronic with Vdc Output All Stainless Steel Construction Temperature Output Direct from P100 or PT1000 MINIATURE High Temperature Capability : -40 to +125 C Technical Specifications Pressure Ranges (FS) 3 / 5 / 10 / 20 / 40 / 100 / 250 / 400 / 600-1/+2; -1/+3; -1/+5 40 / 70 / 150 / 300 / 500 / 1500 / 3000 / 5000 / ,5/+30; -14,5/+40; -14,5/+70 Type Safe Overload / Burst Pressure Absolute, Gage, Sealed Gage (for ranges > 40) 150%FS / 300%FS Power Supply 5Vdc ± 10mV 8 to 30Vdc 8 to 16Vdc Consumption Output at -100%FS (only for ± range) 0,5Vdc < 10mA Proportional to +100%FS 0,5Vdc Output at 0%FS 0,5Vdc 0Vdc 0,5Vdc Output at 100%FS 4,5Vdc 5Vdc 4,5Vdc Zero and Sensitivity settings tolerances Combined Non Linearity & Hysteresis (P) Thermal probe Combined Non Linearity & Hysteresis (T C) Non Repeatability Signal Bandwidth (electronic) Insulation Operating Temperature Combined thermal zero & sensitivity shifts Long Term Stability ± 50mV ± 0,25%FS ± 0,1%FS PT100 Class A PT1000 Class A ± 0,1%FS max. ± 0,02%FS typ. -3dB > 50 Vdc -25 to +85 C / -13 to +257 F -40 to +125 C / -40 to +257 F -40 to +125 C / -40 to +257 F ± FS/ C ± FS/ C ± 0,1%FS/year typ. Constant acceleration in linear vibrations Mechanical Shock Electrical Protection EMC Protection Standard Electrical Connection ± 0,02%FS/g (frequency Hz, 50g max.) 100g ½ sinus 1ms Protected against polarity inversion Compliant to EN m Teflon Jacketed Shielded Cable Ø3,4mm, 5 wires AWG26 Standard Mechanical Connection Material(s) of Wetted Parts Weight Enclosure Protection Accessories delivered with the sensor PCM163 PCM164 MIL-C26482 (6 pins) receptacle PCM167 M10x1 male - Stainless Steels 316L (1.4404), 15-5PH (1.4545) and 17-4PH (1.4542) < 30g without cable IP65 for Sealed Gage & absolute Viton O-ring 7,65x1,63 (standard) Calibration certificate, Datas in pressure and temperature Specifications subject to change without notice

5 PCM160 PRESSURE & TEMPERATURE SENSOR CAPTEUR PRESSION & TEMPERATURE Ø2.8 M10x1 Joint Viton 7.65x1.63 Hex. 16 Ø PLAN / DRAWING Ø Ø MIL-C26482 CABLE SCALE 1:1

6 PCM160 ORDER CODE Complete Reference PCM16 X - X - XXX - XXX - XX - XX - XX - X X X - XX Model Pressure sensor for Combined Measurements PCM Ø 16,6mm 16 Output Signal 0,5-4,5Vdc (ratiometric) 3 0-5Vdc 4 0,5-4,5Vdc 7 Material of wetted parts Stainless Steel S Pressure Ranges Unidirectional example : Bidirectional example : -1/+4-1/4 Pressure Unit Operational Mode Gage G Sealed Gage SG Absolute A Mechanical Thread M10x1 male 02 Electrical Connection Teflon cable output X meter(s) 09/Xm MIL-C26482 (6 pins) to +85 C / -13 to +257 F B -40 to +125 C / -40 to +257 F D Accuracy ± 0,25%FS (Standard) 0 ± 0,1%FS () 1 Thermal Shifts ± FS/ C (Standard) 0 ± FS/ C () 1 s N/A 00 EPDM O'ring E Specific Settings S Specific Marking G PT1000 Thermal Probe C

7 PTA228 (former P628) ACCURATE MEASUREMENT Accurate Pressure Sensor Built in Electronic 0-5Vdc 4 wires Technology suitable for Noisy Environments Large Choice of Threads & Electrical Connectors INDUSTRIAL All Stainless Steel Construction Technical Specifications Pressure Ranges (FS) Type Safe Overload / Burst Pressure Power Supply Consumption Output at -100%FS (only for ± range) Output at 0%FS Output at 100%FS Zero and Sensitivity settings tolerances Combined Non Linearity & Hysteresis Non Repeatability Signal Bandwidth (electronic) Insulation Operating Temperature Combined thermal zero & sensitivity shifts Long Term Stability Constant acceleration in linear vibrations Mechanical Shock Electrical Protection EMC Protection Standard Electrical Connection Standard Mechanical Connection Material(s) of Wetted Parts Weight Enclosure Protection Accessories delivered with the sensor PTA228 Barometric : m absolute 200 / 350 / 700 / 1000m / 2 / 3 / 5 / 10 / 20 / 40 / 100 / 250 / 400 / 600 ± 1; -1/+2, -1/+3; -1/+5; -1/+10 3 / 5 / 10 / 15 / 30 / 40 / 70 / 150 / 300 / 500 / 1500 / 3000 / 5000 / 8000 ± 14,5, -14,5/+30, -14,5/+40; -14,5/+70; -14,5/+150 Absolute, Gage, Sealed Gage (for ranges > 40) 150%FS / 300%FS 8 to 30Vdc < 10mA 0Vdc 0Vdc 5Vdc ± 50mV ± 0,1%FS - ± 0,02%FS typ. -3dB - > 50Vdc 0 to +60 C / 32 to +140 F -25 to +85 C / -13 to +185 F -25 to +85 C / -13 to +185 F ± FS/ C - ± 0,1%FS/year typ. ± 0,02%FS/g (frequency Hz, 50g max.) 100g ½ sinus 1ms Protected against polarity inversion Compliant to EN m Viton Jacketed Shielded Cable Ø3mm, 4 wires AWG26 MIL-C26482 (6 pins); DIN DIN miniature; male connector M12 (4 pins) 1/4 Gaz; M14x1,5; 1/4 NPT (males) 7/16-20 UNJF; M10x1 male; 1/4 Gaz female; 1/2 Gaz male; M10x1 male with 120 cone Stainless Steels 316L (1.4404), 15-5PH (1.4545) and 17-4PH (1.4542) < 100g without cable IP65 for Sealed Gage & Absolute Calibration certificate or Datas in pressure and temperature (ion) Specifications subject to change without notice

8 PTA220 1/4 NPT /2 GAZ 7/16-20 UNJF Ø6 M10x1, 120 cone 1/4 GAZ female ACCURATE MEASUREMENT GRANDE PRECISION 13 TUBE M12 SOURIAU spe Cable DIN miniature DIN PLAN / DRAWING M14x M10x1 MIL 6 pins /4 GAZ SCALE 1:1

9 PTA220 ORDER CODE Complete Reference PTA22 X - X - XXX - XXX - XX - XX - XX - X X X- XX Model Pressure sensor for Accurate Measurement PTA Ø 22mm 22 Output Signal 0-5Vdc with 4 wires technology 8 Material of wetted parts Stainless Steel S Pressure Ranges Unidirectional example : Barometric : m 700/1200 Bidirectional example : -1/+3-1/3 Pressure Unit m m Operational Mode Gage G Sealed Gage SG Absolute A Mechanical Thread 1/4 Gaz male 07 M14x1,5 male 01 1/4 NPT male 13 7/16-20 UNJF male 10 M10x1 male 02 1/4 Gaz female 08 1/2 Gaz male 06 M10x1 male with 120 cone 21 Electrical Connection Viton cable output X meter(s) 08/Xm MIL-C26482 (6 pins) 03 DIN DIN miniature 02 Male connector M12 (4 pins) 07 0 to +60 C / 32 to +140 F A -25 to +85 C / -13 to +185 F B Accuracy Thermal Shifts s ± 0,1%FS (Standard) 0 ± FS/ C (Standard) 0 N/A 00 EPDM O'ring E Specific settings S