Titus. A powerful range of fluorescent luminaires designed for sport and industrial applications

Transcription

1 Titus A powerful range of fluorescent luminaires designed for sport and industrial applications

2 Introduction The Titus range of fluorescent luminaires for industrial and sports lighting applications has quickly gained wide acceptance and there are Titus installations in all parts of the world s Titus Industry t Titus Sport The basic thinking that went into the first Titus range is still valid some five years on but our technical departments now allow us to update the range with significant benefits to both user and installer. Titus offers many new benefits Higher output lamps The range includes the use of 80W lamps for optimum performance. With up to 24,600 initial lamp lumens per luminaire, Titus now offers a high quality alternative to conventional high and low bay fittings with high pressure discharge lamps. Longer life in industry Titus Industry luminaires are supplied with heavy duty electronic ballasts designed to operate in harsh environments; for example they have a life of up to 100,000 + hours at high ambient temperatures and can withstand voltage peaks of up to 4kV. Contents Performance, Efficiency, Comfort - PEC 3 Indoor sports applications 4-7 Industrial applications 8-11 Titus Sport ordering guide Titus Industry ordering guide Energy savings Dimmable control gear options, allow the luminaires to be easily linked to presence or daylight detectors, resulting in potential energy saving benefits. Improved Safety Emergency lighting is required to operate automatically when a lighting circuit loses the mains supply. Integral emergency versions of Titus are offered as standard in the range. 2

3 Performance, Efficiency and Comfort (PEC) for a better lit environment Titus evokes the spirit of Thorn Lighting s dynamic, results-orientated PEC programme The programme is based on the principle that Performance, Efficiency and Comfort determine the effectiveness of lighting, its impact on the people using it, and its impact on the natural environment. Titus delivers the right light on the right place at the right time. Tennis hall in the French city Thorigné Fouillard Photograph by Pilam Performance: Providing the best visual effectiveness From a luminaire that is less than 250mm wide, MIRO reflectors offer precise light distributions (wide and asymmetric) to give good vertical illuminance When compared to single point discharge fittings with high pressure discharge lamps, the linear nature of Titus provides less glare and distinct shadowing, offering a much improved light quality Colour rendering of Ra 85+ provides excellent visibility and satisfies the requirements of the European Directive EN for the lighting of workplaces and meets Sport Guidance recommendations Efficiency: Conserving energy and effort, reducing CO 2 emissions and waste, providing lighting that is practical and efficient to install, operate and maintain High output T16 lamps with typically high efficacies in the 80 lumens per watt bracket combine with high frequency control gear to ensure energy efficient lighting Titus can be used in conjunction with automatic control systems that react to the presence or absence of people and/or to the amount of daylight available to maximise the overall energy efficiency of any building Simple light variation can be achieved by Titus, through circuit switching or dimming. By reducing the power consumption on demand, energy saving is achieved. The curved body profile ensures great rigidity and mechanical strength whilst the steel stove enamel finish provides resistance to physically and chemically aggressive environments Heavy duty electronic ballasts used in certain Titus Industry versions ensures long reliable operation, saving maintenance costs in difficult to access areas Comfort: giving people satisfaction and stimulation High frequency gear eliminates the risks and aggravation of stroboscopic effects, which can occur in high-speed sports or where rotating machinery is present In the event of the mains supply failing, it is reassuring to know that integrated emergency versions of Titus will provide the correct level of illumination to reduce confusion and aid safe evacuation Better industrial lighting can boost workers morale and productivity, while in the sporting arena good lighting encourages performances and crowd enjoyment 3

4 Indoor Sports Applications Indoor sports facilities are being developed or upgraded throughout the world to achieve higher quality lighting Lighting specifications are becoming more onerous, requiring increased illuminance, control flexibility and the ability to cater for multiple sport types. The Titus Sport range has been extended to address the following application needs: Visual environment It is easy to think that getting the lighting right is a matter of achieving the right lighting level, but lighting must also create the right visual performance. The uniformity of illumination, for example, affects the perception of space and the ability to play effectively. Discomfort glare determines how uncomfortable players find the lighting. Stroboscopic effect can impact the visual perception of moving objects, and modelling is important as poor control of shadowing can make objects appear unclear and flat. Discomfort glare, stroboscopic effect and modelling can all affect the performers ability to concentrate without distraction or fatigue. Titus provides high levels of visual performance through a specially designed MIRO reflector Optional louvres give additional glare reduction T16 lamps provide high colour rendering Electronic ballasts offer flicker free light eliminating stroboscopic effects Level of competition Lighting Class I II III International or national 3 Regional 3 3 Local Training 3 3 Recreational/education 3 Flexibility of use Most indoor sports halls cater for a mixture of different sports and non-sporting events. As all sports have different visual requirements, it is critical to define all likely activities and levels of play. EN12193 defines all sporting requirements based on the level of competition and lighting class (I,II or III). See table above, plus individual activity requirements on page 7. Titus Sport has been developed for use with ceiling heights of 4m+ Schemes can be planned to cater for all three levels of competition Available in 49W, 54W and 80W Leisure Centre, Boson, Sweden 4

5 Lighting control One lighting layout may not meet all requirements, as specific sports require different lighting configurations. (eg tennis - practice = 300 lux, tournament = 750 lux) It is often essential for the lighting system to allow groups of luminaires to be controlled, adjusting the level of light according to the sport. Simple luminaire lamp switching or linking directly to lighting controls enables flexibility in illuminance and a lower energy demand, allowing savings to be achieved. Some installations have daylight present, and further energy savings may be made by linking the luminaires to daylight sensors. For spectator events there is a growing demand to provide theatrical lighting effects that can create atmosphere and interaction between the players and spectators. Again, this calls for lighting controls: Titus offers a facility for separate circuit switching for different light output levels Dimming control gear allows dynamic lighting effects Compatibility with lighting controls allows precise control and energy savings to be achieved Arrangement of luminaires For sports such as badminton and tennis, the positioning of the luminaires outside the playing area may be necessary to avoid disability glare for players looking upwards, whilst delivering a good level of vertical illuminance to ensure visibility of any high play. Titus can be tilted up to 50 via patented brackets and still provide optimal light direction Allows opportunity for product placement outside of the players viewing sight Impact resistance Indoor sports luminaires should be impact resistant against balls and projectiles. They should be designed and mounted to minimise the risks of objects becoming trapped within or behind them. Titus curved body profile prevents projectiles becoming lodged A robust lockable wire guard safeguards the lamps (IK09) DIN (ball impact proof) approved Silkeborg Sports Centre, Denmark 5

6 Indoor Sports Applications For certain sports, careful consideration needs to be given to environmental conditions Occasionally there is a requirement for a luminaire which is designed for prolonged, reliable operation in indoor sporting applications where environmental conditions are severe. Warm humid atmospheres, perhaps carrying corrosive agents, or low ambient temperatures, such as in swimming pools and ice rinks, are representative of the more extreme conditions encountered. Titus Industry is just that luminaire. It is made from galvanised steel finished in grey with a protective glass enclosure, sealed to IP65 (dust tight, jet proof). Norresundby Swimming Pool, Aalborg Denmark Skøjtehal Ice Rink, Arhus Denmark 6

7 EN 12193: 2007 Light and Lighting - Sports Lighting This table contains lighting recommendations for a variety of sports. Lighting requirements may differ according to the level of competition of a sport, and therefore requirements are shown for different lighting classes according to EN 12193: 2007 Light and Lighting - Sports Lighting Type of area, task or activity Class E m R a Uo Aerobics (recreational) Archery (lane/target) 200/Ev /0.8 Athletics (indoor) Class I Class II Badminton Class I Class III Basketball (indoor) Class I Billiards Class I Class II Class III Boccia (indoor) Class I Class II Boules (indoor) Class I Class II pin/9 pin bowling Lanes Pins 25m lane Ev Pins 50m lane Ev Boxing Class I Class II Class III Climbing Class I Class III Cricket nets Class I Class II Class III Curling (target/playing area) 300/ Cycling (indoor) Class I Dancing Class I Class II Darts Class I Eh 200/Ev Class II Eh 100/Ev Class III Eh 50/Ev Fencing Class I Eh 750/Ev Class II Eh 500/Ev Class III Eh 300/Ev Football (indoor) Class I Gymnastics Class I Class II Handball (indoor) Class I Type of area, task or activity Class E m R a Uo Hockey (indoor) Class I Class III Ice hockey (indoor) Class I Class III Ice skating Class I Class III Judo Class I Kendo/Karate Class I Netball (indoor) Class I Petanque (indoor) Class I Class II Racketball Class I Class III Roller skating Class I Class II School sports Class I Shooting (lane/target) 200/Ev /0.8 Snooker Class I Class II Class III Speed skating Class I Class II Squash Class I Class III Swimming Class I Class II Table tennis Class I Class III Tennis (indoor) Class I Class III Weight lifting Class I Wrestling Class I

8 Industrial Applications There isn t an employer in industry who wouldn t like to see a reduction in accidents and running costs, whilst improving worker morale and productivity Happily, there s one luminaire that can help deliver all these objectives Titus Industry. It has been designed with detailed consideration to the following application issues: A typical industrial area scheme The example scheme shows typical energy saving potential benefits that can be achieved when linking luminaires to day light control systems. Size: 20m X 20m, with a ceiling height of 6m s containing 10% sky lights by floor area. Usage: Daily from 9am to 5pm (7 days a week, 365 days a year). Based on Titus Industry 3 X 80W TW (fixed output) and Titus Industry 3 X 80W HFD TW (dimming output). Required task illuminance level = 500 lux Actual task illuminance level = 582 lux Luminaire quantity = 20 20X20m Graph A Lighting Contribution Shows the contribution of average daylight and luminaire artificial light required to achieve 500 lux. 100 Energy saving Substantial savings can be made by controlling the hours of use. The lighting may be on unnecessarily whilst the building, or part of it, is unoccupied, for example, a racking area that is not continuously used. Also giving flexibility and control to the occupants increases their efficiency and effectiveness. Simple use of daylight detectors allows natural daylight to be maximised, allowing luminaires to be powered only when required resulting in further energy savings! Titus Industry offers dimming, allowing a simple variation in illuminance Compatibility with Thorn lighting controls, such as daylight/presence sensors. For more control details please refer to Thorn s SensaLite brochure % of Total Lighting illuminance Power (W) Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Artificial Luminaire Light % Output Contribution *Based on CIE average overcast sky value Average Daylight % Output Contribution* Graph B Power Consumption Shows the energy saving potential over a yearly period when using dimming technology linking to day light levels to achieve 500 lux Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Titus Industry 3 X 80W TW Yearly power consumption = 15,242,400W Titus Industry 3 X 80W HFD TW Yearly power consumption = 6,096,960W Massive potential yearly power saving of 60%! (9,145,440W) 8

9 Aiding vision Although we must never forget the importance of energy saving, a lighting system chosen on the basis of this factor alone will not necessarily provide the correct lit environment. If the installation does not aid vision, then it cannot be claimed to be energy efficient. Illuminance on the task is the main criteria as the level of lighting can effect productivity levels, motivation and create a safer working environment for employees. Varying visual needs require the consideration of factors such as colour rendering, glare and illuminance levels, and these should be taken into account when choosing the correct luminaire/lamp combination. Industrial areas generally contain different height equipment (eg press machines, racking and cranes) therefore it is essential to achieve good modelling, contrast and control of shadowing in any lighting scheme. Where rotatory machinery is used, the stroboscopic effect should be eliminated to reduce the risk of any potential accidents. Titus Industry s high performance MIRO reflectors give precise light distribution Available in 49W, 54W and 80W Optional louvre attachments allows greater glare control Electronic ballasts offer flicker free light, eliminating stroboscopic effects Concrete Factory, Betongfabrik, Ulricehamn Maintenance Many industrial environments have impurities in the power supply due to electrical motors running, or couplers connecting/ disconnecting huge loads, giving spikes and voltage fluctuations. Over time this can impact and reduce the gear and lamp life of any luminaire. If a fitting has not been designed for prolonged operation in the areas where it will find most use, it will fail. Frequent access to fittings can be difficult and costly, so measures that ease access should be considered, along with technology that extends maintenance intervals and designs that aid easy cleaning. Titus Industry offers robust heavy duty electronic ballasts: Long service life up to 100,000 + hours for extended maintenance cycles - Designed to withstand voltage peaks up to 4kV for reliable operation The luminaire s tilting facility (up to 50 ) and asymmetric light distributions allow flexible mounting positions around the task area for easy maintenance access Glass cover remains fixed to the luminaire when open 9

10 Industrial Applications Harsh environments Many industrial spaces have extreme environmental conditions. Mechanical stress is also often present, therefore, luminaires should be designed and chosen to ensure they are suitable for the environmental conditions within the task space. Titus Industry is sealed to IP65 (dust tight and jet proof) A toughened glass panel clamped to a single pour rubber gasket, by long toggles, ensures consistent gasket pressure and reliability Impact resistance to IK08 confirms its suitability for challenging applications Robust fabricated steel body ensures mechanical strength Titus Range Advantages Over High Pressure Discharge Luminaires When comparing in a scheme, traditional single point source discharge solutions such as high/low bays or floodlights, the Titus range offers many benefits including: Good modelling and reduced shadowing can be easily achieved using a linear light source over a single point source Excellent colour temperatures and rendering characteristics (Ra 85+) for improved visibility and compliance to EN Opportunity to easily add lighting controls to the scheme. Dimming versions allow flexible illuminance levels or energy savings to be made on demand. Integral emergency versions save installation time and money compared to installing separate task and emergency lighting Stepless tilting and asymmetric light distributions provide directional light. This offers flexibility in luminaire positioning in any scheme design where placement around obstacles or access for maintenance might be difficult and costly. The lamp and control gear combination offers great lumen maintenance depreciation (>90% at 16,000hrs) maximising luminaire maintenance interval periods Electronic gears allow lamps to be instantly dimmed and switched on/off when linked to lighting controls, to provide an efficient easy energy saving solution Concrete Factory, Betongfabrik, Ulricehamn 10

11 Heathrow Airport Terminal 5, UK 11

12 Titus Sport A dedicated sports hall luminaire matching the high expectations for rigid mechanical construction and superb lighting performance Titus Sport has been developed for use in all sports, athletics and recreational halls. Unique curved housing prevents projectiles from remaining on top of the fitting Supplied and delivered with protective lockable wire guard Separate circuit switching on 3 and 4 lamp versions (2+2 or 1+2) Patented mounting bracket allows stepless tilting up to 50 without rotational torque Easy installation and maintenance with patented built-in junction box Dimming versions are compatible with lighting controls Optional louvres for additional glare control (twin lamps only) Lamps 49W-80W T16 (FDH) linear fluorescent. Cap: G5 Materials/Finish Body: white powder painted galvanised steel Wire guard: galvanised steel Reflector: high quality Miro aluminium. Halogen free internal wiring. Installation/Mounting Surface mounted or mounted on catenary pipe or catenary wire. Mounting brackets included which allow tilting up to 50 even when wire suspended. The centre of gravity is positioned directly below the fastening point. For catenary suspension either wire fastenings or pipe clamps should be ordered. The wire guard and optional louvres are hinged for ease of maintenance. Electrical connection Two versions of Titus Sport are available: 1. Central wiring box version with patented built-in junction box (minimising installation time) has side access hatch to allow electrical termination without opening the fitting. Two 3 x 2 x 2.5mm² terminal blocks allow wiring through end-caps or top of fitting. Grommets supplied, accepting 10 to 14mm cable. 2. Through-wiring version has 5 x 2 x 2.5mm² terminal blocks at each end. Standards Designed and manufactured to comply with EN EN Tested and approved to DIN , (36 handball shots at impact speed exceeding 16.5m/s) IP23 (IP21 when tilted up to 50 ) IK09 Specification To specify state: Sports hall luminaire for 49W, 54W or 80W T16 (T5) lamps, for surface or suspended mounting with brackets included which allow tilting up to 50 without rotational torque. To comply with DIN As Thorn Titus Sport. DIN (ball impact proof) approved Side access hatch for electrical connection Optional top cable entry Wire guard hinges for maintenance 12

13 Ordering Guide T16 lamps to be ordered separately. Description Ilcos Code Socket Wt (kg) SAP Code High Frequency TITUS SPORT 2X49W FDH G TITUS SPORT 2X54W FDH G TITUS SPORT 3X49W FDH G TITUS SPORT 3X54W FDH G TITUS SPORT 3X80W FDH G TITUS SPORT 4X49W FDH G TITUS SPORT 4X54W FDH G TITUS SPORT 4X80W FDH G ** High Frequency Dimmable TITUS SPORT 3X49W HFD FDH G TITUS SPORT 3X80W HFD FDH G TITUS SPORT 4X49W HFD FDH G TITUS SPORT 4X54W HFD FDH G TITUS SPORT 4X80W HFD FDH G High Frequency Emergency SelfTest Addressable TITUS SPORT 2X49W E3TX FDH G TITUS SPORT 3X49W E3TX FDH G TITUS SPORT 3X80W E3TX FDH G TITUS SPORT 4X49W E3TX FDH G TITUS SPORT 4X54W E3TX FDH G TITUS SPORT 4X80W E3TX FDH G High Frequency Through Wire TITUS SPORT 2X49W TW FDH G TITUS SPORT 2X54W TW FDH G TITUS SPORT 3X49W TW FDH G TITUS SPORT 3X54W TW FDH G TITUS SPORT 3X80W TW FDH G TITUS SPORT 4X49W TW FDH G TITUS SPORT 4X54W TW FDH G TITUS SPORT 4X80W TW FDH G ** High Frequency Dimmable Through Wire TITUS SPORT 3X49W HFD TW FDH G TITUS SPORT 3X80W HFD TW FDH G TITUS SPORT 4X49W HFD TW FDH G TITUS SPORT 4X54W HFD TW FDH G TITUS SPORT 4X80W HFD TW FDH G Attachments* TITUS LOUVRE 54W PSB TITUS LOUVRE 49W PSB TITUS LOUVRE 54W DSB TITUS LOUVRE B 49W DSB TITUS LOUVRE B 54W DSB 30 DEGREES TITUS LOUVRE B 49W DSB 30 DEGREES Accessories PIPE CLAMPS FASTENINGS - PAIR WIRE SUSPENSION FASTENINGS - PAIR TW - Through wiring, E3TX - 3 hour emergency SelfTest Addressable, PSB - Flat satin cross vanes, DSB - Parabolic cross vanes all satin finish, HFD - High Frequency Dimmable *Only suitable for two lamp versions NB: **Amalgam Lamp Usage We recommend the use of amalgam lamps in applications where non dimming is required in Titus Sport 4x80W versions ( & ) only to allow a higher luminaire efficiency to be achieved. We do not recommend the use of amalgam lamps in applications where very fast start up, dimming or emergency lighting is essential Titus Sport Lamp: T16 2 X 49W LOR: 78% cd/1000 lm Titus Sport Lamp: T16 3 X 80W LOR: 79% cd/1000 lm E3TX emergency versions offer SelfTest and Addressable Test functionality in a single fitting. E3TX luminaires operate as SelfTest when stand alone. A diagnostic processor automatically performs the mandatory function and duration tests, using a bi-colour LED indicator to show the results cd/1000 lm Titus Sport with PSB louvre Lamp: T16 2 X 49W LOR: 62% 1320 / 54W 1620 / 49/80W 1234 / 54W 1534 / 49/80W FC 1298 / 54W FC 1598 / 49/80W FC = Fixing centres These emergency fittings become addressable when connected to Thorn s Explorer Project or Explorer Vision system. This links every luminaire to an intelligent local controller that automatically conducts all the necessary tests and stores the full results in one central location. 13

14 Titus Industry A range designed to meet the higher demands of industrial applications in terms of protection and mechanical construction The luminaire is built to withstand aggressive environments and has a high level of corrosion protection as standard - for example when used in car cleaning facilities where detergents can easily destroy conventional plastic luminaires. Four long toggles (570mm in length) maintain gasket pressure to ensure a consistent gasket seal and IP65 reassurance Patented mounting bracket allows stepless tilting up to 50 without rotational torque Asymmetric light distributions available Optional louvres available for additional glare control (twin lamp only) Dimmable versions available Heavy duty ballast versions for reliable long life solutions Lamps 49-80W T16 (FDH) linear fluorescent. Cap: G5 Materials/Finish Body: matt grey powder painted galvanised steel Reflector: high quality MIRO aluminium Protective glass: 4mm toughened glass with EPDM gasket. Halogen free internal wiring. Installation/Mounting Surface mounted or mounted on catenary wire. Mounting brackets included which allow tilting up to 50 without rotational torque. The centre of gravity is positioned directly below the fastening point. For catenary suspension fastening accessories should be ordered. Electrical connection: through-wiring version with 5 X 2 X 2.5mm² terminal blocks at each end. Grommets supplied, accepting 10 to 14mm cable. Standards Designed and manufactured to comply with EN EN IP65 IK08 Specification To specify state: Dedicated IP65 industrial luminaire for T16 (T5) linear fluorescent lamps, for surface or suspended mounting with brackets which allow tilting up to 50 degrees without rotational torque. As Thorn Titus Industry. Optional louvres EPDM gasket gives IP65 seal Long toggles to maintain gasket pressure 14

15 Ordering Guide T16 Lamps to be ordered separately. Description Ilcos Code Socket Wt (kg) SAP Code High Frequency Through Wire TITUS INDUSTRY 1X49W TW FDH G TITUS INDUSTRY 1X54W TW FDH G TITUS INDUSTRY 2X49W TW FDH G TITUS INDUSTRY 2X54W TW FDH G TITUS INDUSTRY 3X49W TW FDH G TITUS INDUSTRY 3X54W TW FDH G TITUS INDUSTRY 3X80W TW FDH G ** TITUS INDUSTRY 4X49W TW FDH G TITUS INDUSTRY 4X54W TW FDH G High Frequency Dimmable Through Wire TITUS INDUSTRY 3X80W HFD TW FDH G TITUS INDUSTRY 4X49W HFD TW FDH G TITUS INDUSTRY 4X54W HFD TW FDH G High Frequency Through Wire Emergency SelfTest Addressable TITUS INDUSTRY 2X49W TW E3TX FDH G TITUS INDUSTRY 3X49W TW E3TXR FDH G TITUS INDUSTRY 4X49W TW E3TXR FDH G High Frequency Through Wire Asymmetric TITUS INDUSTRY 1X49W TW AS FDH G TITUS INDUSTRY 1X54W TW AS FDH G TITUS INDUSTRY 2X49W TW AS FDH G TITUS INDUSTRY 2X54W TW AS FDH G Industry High Frequency Ballast Through Wire TITUS INDUSTRY 3X80W IHF TW FDH G ** TITUS INDUSTRY 4X49W IHF TW FDH G TITUS INDUSTRY 4X54W IHF TW FDH G TITUS INDUSTRY 4X80W IHF TW FDH G ** Attachments* TITUS LOUVRE 49W PSB TITUS LOUVRE 54W PSB TITUS LOUVRE B 49W DSB TITUS LOUVRE 54W DSB TITUS LOUVRE B 49W DSB 30 DEGREES TITUS LOUVRE B 54W DSB 30 DEGREES Accessories WIRE SUSPENSION CLIP KIT TYPE TW - Through wiring, HFD - High Frequency Dimmable, AS - Asymmetric, R - Remote external box, E3TX - 3 hour emergency SelfTest Addressable, IHF - Industry heavy duty High Frequency ballast, PSB - Flat satin cross vanes, DSB - Parabolic vanes all satin finish *Only suitable for two lamp versions NB **Amalgam Lamp Usage We recommend the use of amalgam lamps in applications where non dimming is required in Titus Industry 80W versions ( , & ) only to allow a higher luminaire efficiency to be achieved. cd/1000 lm Titus Industry Lamp: T16 2 X 49W TW LOR: 89% cd/1000 lm Titus Industry with DSB louvre Lamp: T16 2 X 49W TW LOR: 60% E3TX emergency versions offer SelfTest and Addressable Test functionality in a single fitting. E3TX luminaires operate as SelfTest when stand alone. A diagnostic processor automatically performs the mandatory function and duration tests, using a bi-colour LED indicator to show the results Titus Industry with PSB louvre Lamp: T16 2 X 49W TW LOR: 71% 248 cd/1000 lm 1320 / 54W 1620 / 49/80W 1234 / 54W 1534 / 49/80W FC 1298 / 54W FC 1598 / 49/80W FC = Fixing centres These emergency fittings become addressable when connected to Thorn s Explorer Project or Explorer Vision system. This links every luminaire to an intelligent local controller that automatically conducts all the necessary tests and stores the full results in one central location. We do not recommend the use of amalgam lamps in applications where very fast start up, dimming or emergency (especially dangerous work areas) is essential. 15

16 Lighting people and places Thorn Lighting Main Offices Australia Thorn Lighting Pty Limited 43 Newton Road, Wetherill Park NSW 2164 Tel: (02) Fax: (02) Website: Austria Thorn Licht GmbH Donau-City-Straße 1, 1220 Wien, Austria Tel: (43) Fax: (43) office.at@thornlighting.com Website: China Thorn Lighting (Guangzhou) Operations Ltd, No.12 Lian Yun Road, Eastern Section, GETDD, Guangzhou , China Tel: (86) Fax: (86) sales.cn@thornlighting.com Thorn Lighting (Tianjin) Co. Ltd 332 Hongqi Road, Tianjin , China Tel: (86) Fax: (86) info.tj@thornlighting.com Czech Republic Thorn Lighting CS spol. s.r.o., Na Březince 6/930, Praha 5 Czech Republic Tel: (420) Fax: (420) thorn.cz@thornlighting.com Website: Denmark Thorn Lighting A/S Kanonbådsvej 12B, 1437 København K, Denmark Tel: (45) Fax: (45) info.dk@thornlighting.com Website: France Thorn Europhane SA 156 Boulevard Haussmann, Cedex 08, Paris 75379, France Tel: (33) Fax: (33) Website: Hong Kong Thorn Lighting (Hong Kong) Limited Unit 4301, Level 43, Tower 1, Metroplaza,223 Hing Fong Road, Kwai Chung, N.T., Hong Kong Tel: (852) Fax: (852) info.hk@thornlighting.com India Thorn Lighting India Pvt. Ltd. 501, 5th Floor, Tanishka, Opp. Gundecha Industrial Estate Akurli Road, Kandivali (E), Mumbai Tel: (91) Fax: (91) international_sales@thornlighting.com Website: Ireland Thorn Lighting (Ireland) Limited 320 Harold s Cross Road, Dublin 6W, Ireland Tel: (353) Fax: (353) dublinsales@thornlighting.com Website: Italy Thorn Europhane Spa Via G Di Vittorio, 2, Cadriano di Granarolo, Bologna 40057, Italy Tel: (39) Fax: (39) info@thornlighting.it Website: New Zealand Thorn Lighting (NZ) Ltd 399 Rosebank Road, Avondale, Auckland 1026 PO Box 71134, Rosebank, Auckland 1348 Tel: (64) Fax: (64) info.nz@thornlighting.com Website: Norway Thorn Lighting AS Strømsveien 344, 1081 Oslo, Norway Tel: (47) Fax: (47) info.no@thornlighting.com Website: Poland Thorn Lighting Polska Sp.z.o.o., Ul. Gazowa 26A, Wrocław , Poland Tel: (48) Fax: (48) thorn.pl@thornlighting.com Website: Russia Thorn Lighting Novoslobodskaya Str., 21, office 406 Business Center Novoslobodskaya 21, Moscow , Russia Tel: (7) Fax: (7) anna.kisteneva@thornlighting.com Website: Singapore Thorn Lighting (Singapore) Pte Ltd 5 Kaki Bukit Crescent, Koyotech Building, Singapore Tel: (65) Fax: (65) info.sg@thornlighting.com Sweden Thorn Lighting AB Industrigatan, Box 305, SE Landskrona, Sweden Tel: (46) Fax: (46) info.se@thornlighting.com Website: United Arab Emirates Thorn Lighting Ltd Dubai Al Shoala Building, Office 301, Block E, Airport road, P.O. Box 1200, Deira, Dubai, UAE Tel: (971) Fax: (971) tlluae@emirates.net.ae Website: Thorn Gulf LLC Al Shoala Building, Office 301/2, Block E, Airport road, P.O. Box 22672, Deira, Dubai, UAE Tel: (971) Fax: (971) thorng@emirates.net.ae Website: United Kingdom Thorn Lighting Limited Silver Screens, Elstree Way, Borehamwood, Hertfordshire, WD6 1FE, UK Tel: (44) Fax: (44) brochures.uk@thornlighting.com Thorn Olympics Sports Lighting Team Tel: olympics.team@thornlighting.com Website: International Sales Thorn Lighting Limited Silver Screens, Elstree Way, Borehamwood, Hertfordshire, WD6 1FE, UK Tel: (44) Fax: (44) international_sales@thornlighting.com Website: Thorn Lighting is constantly developing and improving its products. All descriptions, illustrations, drawings and specifications in this publication present only general particulars and shall not form part of any contract. The right is reserved to change specifications without prior notification or public announcement. All goods supplied by the company are supplied subject to the company s General Conditions of Sale, a copy of which is available on request. All measurements are in millimetres and weights in kilograms unless otherwise stated. Publication No: 440 (INT) Publication Date: 03/09