SAFETY SG2 BASE / EXTENDED SG4 BASE SG OO-E. High reliability Easy installation and alignment Cost effective APPLICATIONS INDUSTRIES
|
|
|
- Julie Wilkinson
- 7 years ago
- Views:
Transcription
1 / EXTENDED High reliability Easy installation and alignment Cost effective Finger, hand, arm detection with basic functions 90 mm version for presence detection Up to 20 m operating distance Compact dimensions (32.3 x 36.9 mm section) SAFETY Anti-interfence coding IP65 Protection; IP69K with optional tube Unshielded cables Rotating and anti-vibration brackets APPLICATIONS - Automatic machines: cutting, packaging, material handling and storing. - Automatic and semi-automatic assembling lines; - Milling, lathe and shearing machines - Bending and metal-working machines INDUSTRIES Food & Beverage, Textile, Wood, Ceramic, Metal, Automotive, Electronics. Finger Hand Arm Body Type 2 Type 4 SG OO-E TYPE 2 Type 2 4 Type 4 RESOLUTION 14 Finger: 14 mm 30 Hand: 30 mm 50 Arm: 50 mm (only Type 2) 90 Arm: 90 mm (only Type 2) MONITORED HEIGHT mm mm mm E E-C X VERSION Type4, EDM, Coded Type2, EDM, Coded Basic Function
2 / EXTENDED TECHNICAL DATA [SG2-xx-xxx-OO-X] [SG2-xx-xxx-OO-E-C] [SG4-xx-xxx-OO-X] [SG4-xx-xxx-OO-E] GENERAL DATA Type (EN ) 2 4 PL (EN ISO ) c e SIL (IEC 61508) 1 3 Resolution mm mm Protected height Operating distance mm (with 150 mm steps) m m (resolution 14 mm) m (resolution 30 mm) ELECTRICAL DATA Power supply (Vdd) 24 Vdc ± 20 Outputs 2 PNP Output current Capacitive load 0.5 A max / each output Vdc max Response time ms depending on model * Cables length (for power supply) MECHANICAL AND ENVIRONMENTAL DATA 50 m max Operating temperature C C Humidity % (no condensation) Mechanical protection IP 65 (EN 60529) FUNCTIONS Test Input On Receiver On Emitter N/A On Emitter Restart Automatic Manual / Automatic Automatic Manual / Automatic EDM (External Device Monitoring) N/A On Receiver N/A On Receiver Selectable Operating Distance N/A On Emitter N/A * For detailed informations refer to related Manual DIMENSIONS Model L1 (mm) L2 (mm) SGx-yy-150-OO-kkk SGx-yy-030-OO-kkk SGx-yy-045-OO-kkk SGx-yy-060-OO-kkk SGx-yy-075-OO-kkk SGx-yy-090-OO-kkk SGx-yy-105-OO-kkk SGx-yy-120-OO-kkk SGx-yy-135-OO-kkk SGx-yy-150-OO-kkk SGx-yy-165-OO-kkk SGx-yy-180-OO-kkk
3 / EXTENDED CONNECTION [ SG2-xx-xxx-OO-X ] [ SG4-xx-xxx-OO-X ] EMITTER RECEIVER NOT USED CONNECTION [ SG2-xx-xxx-OO-E-C ] [ SG4-xx-xxx-OO-E ] EMITTER RECEIVER NOTES To set manual restart, connect Pin 8 (MAN/AUTO) with Pin 6 (OSSD2) To deactivate EDM function, connect Rx Pin 3 to 24Vdc on Receiver INDICATORS Emitter Receiver NORMAL OP. NORMAL OP. LAST ON SAFE (BREAK) SYNC
4 / EXTENDED MODEL SELECTION AND ORDER INFORMATION [ SG2-xx-xxx-OO-X ] [ SG2-xx-xxx-OO-E-C ] SG OO-X SG OO-E-C SG OO-X SG OO-E-C SG OO-X SG OO-E-C SG OO-X SG OO-E-C SG OO-X SG OO-E-C Hand protection Presence / Arm detection SG OO-X SG OO-E-C SG OO-X SG OO-E-C SG OO-X SG OO-E-C SG OO-X SG OO-E-C SG OO-X SG OO-E-C SG OO-X SG OO-E-C SG OO-X SG OO-E-C SG OO-X SG OO-E-C SG OO-X SG OO-E-C SG OO-X SG OO-E-C SG OO-X SG OO-E-C SG OO-X SG OO-E-C SG OO-X SG OO-E-C SG OO-X SG OO-E-C SG OO-X SG OO-E-C SG OO-X SG OO-E-C SG OO-X SG OO-E-C SG OO-X SG OO-E-C SG OO-X SG OO-E-C SG OO-X SG OO-E-C SG OO-X SG OO-E-C SG OO-X SG OO-E-C SG OO-X SG OO-E-C SG OO-X SG OO-E-C SG OO-X SG OO-E-C SG OO-X SG OO-E-C SG OO-X SG OO-E-C SG OO-X SG OO-E-C SG OO-X SG OO-E-C
5 / EXTENDED [ SG4-xx-xxx-OO-X ] [ SG4-xx-xxx-OO-E ] Finger protection Hand protection SG OO-X SG OO-E SG OO-X SG OO-E SG OO-X SG OO-E SG OO-X SG OO-E SG OO-X SG OO-E SG OO-X SG OO-E SG OO-X SG OO-E SG OO-X SG OO-E SG OO-X SG OO-E SG OO-X SG OO-E SG OO-X SG OO-E SG OO-X SG OO-E SG OO-X SG OO-E SG OO-X SG OO-E SG OO-X SG OO-E SG OO-X SG OO-E SG OO-X SG OO-E SG OO-X SG OO-E SG OO-X SG OO-E SG OO-X SG OO-E SG OO-X SG OO-E SG OO-X SG OO-E SG OO-X SG OO-E SG OO-X SG OO-E CABLES [SG2-xx-xxx-OO-X] [SG2-xx-xxx-OO-E-C] [SG4-xx-xxx-OO-X] [SG4-xx-xxx-OO-E] POLES TRANSMITTER CABLE LENGTH (m) CS-A1-02-U ASE1120 CS-A1-02-U ASE1130 CS-A1-02-U ASE1140 CS-A1-02-U ASE CS-A1-02-U ASE1160 [SG4-xx-xxx-OO-X] [SG2-xx-xxx-OO-X] [SG2-xx-xxx-OO-E-C] [SG4-xx-xxx-OO-E] All cables have axial connectors RECEIVER CABLE LENGTH (m) CS-A1-02-U ASE1120 CS-A1-02-U ASE1130 CS-A1-02-U ASE1140 CS-A1-02-U ASE1150 CS-A1-03-U ASE1170 CS-A1-03-U ASE1180 CS-A1-03-U ASE1190 CS-A1-03-U ASE1200 CS-A1-03-U ASE1210 CS-A1-06-U ASE1220 CS-A1-06-U ASE1230 CS-A1-06-U ASE1240 CS-A1-06-U ASE1250 CS-A1-06-U ASE1260 NOTE
6 / EXTENDED ACCESSORIES Standard angled brackets Rotating brackets Antivibration support (4 pcs / 6 pcs)* Plastic brackets (4 pcs / 6 pcs)* IP67/IP69K Tubes Protective Stands Stand Plate for SG-PSB Protective Stands Mounting Brackets (4 pcs / 6 pcs)* Floor Columns Deviating Mirrors Deviating Mirrors mounting kit for SG-PSB Mirror Mounting Bracket Safety Unit [ SG2-xx-xxx-OO-X ] [ SG2-xx-xxx-OO-E-C ] BRACKETS PROTECTION TUBES AND STANDS MIRRORS SAFETY UNITS [ SG4-xx-xxx-OO-X ] ST-KSTD (outfit for SG2 Base and SG4 Base) ST-K4ROT (outfit for SG2 Extended) ST-K4AV ST-K6AV ST-KP4MP ST-KP6MP SG-IP69K series SG-PSB series SG-P ST-PS4-SG-SE ST-PS6-SG-SE SE-S Series SG-DM Series ST-PS-DM ST-DM [ SG4-xx-xxx-OO-E ] EDM Relay Box** CS ME-03VU24-Y CS ME-03VU24-Y14 Safety control unit for single beams and SLC LASER Pointer ALIGNMENT TOOL SE-SR2 SG-BWS-T4-MT * Use 6 brackets for light curtains with length >= 1200 mm ** When using EDM Relay Box or Muting connection box, connect EDM input, and be sure EDM function is active on the safety light curtain For accessories part number, please refer to Safety Reference Guide NOTES SG-LP Rev. 00, 05/2015 UNI EN ISO9001 The company endeavours to continuously improve and renew its products; for this reason the technical data and contents of this catalogue may undergo variations without prior notice. For correct installation and use, the company can guarantee only the data indicated in the instruction manual supplied with the products.
Tubular Analog model resolution: 0,5 mm (SLOW mode), 1 mm (FAST mode) Right angle Repeatibility: 0,7 mm Vdc
Ultrasonic sensors for high precision detection of clear and transparent objects Clear object detection, inspection on transparent or highly reflective film and liquid level measurement Standard M18 tubular
SENSORS. Miniature Sensors - S3Z. Advanced line of miniature Asian style of photoelectric sensors. 40-300 mm background suppression
Advanced line of miniature Asian style of photoelectric sensors 4-3 background suppression.7 m proximity, 15 with narrow beam 4 m polarized retroreflective 3 m LASER through beam Standard 3-wire output
Compact Sensors - S8 Series. Compact size and high performance for the most challenging detection applications
Compact size and high performance for the most challenging detection applications Compact dimensions (14x42x25 mm) Background suppression for transparent and shiny objects High speed contrast sensor up
photoelectric highlights www.automation.datalogic.com
photoelectric miniature sensors S8 series The new S8 series of compact sensors offers excellent detection performances, usually associated with sensors that have larger dimensions and a higher price. The
sensors Miniature Sensors - S100 The universal miniature photoelectric sensor
Miniature Sensors - S1 The universal miniature photoelectric sensor Two threaded front mounting holes Two slotted rear mounting holes Anti-tampering sensor (no adjustment) Standard optic functions and
SAFETY LIGHT CURTAINS
SAFETY LIGHT CURTAINS Overview Safety Light Curtains with resolutions that can be reduced guarantee protection and tolerate work equipment in the protective field The Safety Light Curtains comply with
Safety Light Curtains. We make safety easy.
Safety Light Curtains. We make safety easy. When Safety Matters, We ve got you covered. TR Electronic is an industry leader in manufacturing and supporting a complete line of absolute rotary encoders,
XUSL4E4BB091NS2 XUSL type 4 - Slave2 - For body protection - 4 Beams, Hp = 910 mm
Characteristics XUSL type 4 - Slave2 - For body protection - 4 Beams, Hp = 910 mm Complementary Detection system Kit composition [EAA] effective aperture angle Emission Main Range of product Product or
SENSORS. Fiber Optic Sensors - S70. Advanced fiber optic amplifiers for high speed and low contrast applications
Fiber Optic Sensors - S7 Advanced fiber optic amplifiers for high speed and low contrast applications DIN rail mountable models with dual digital displays speed models: 2 μs...5 ms Super high speed models:
3 3RG78 45 program overview
Overview RG78 45 light curtains and arrays with integrated processing unit for type 4 in accordance with IEC/EN 61496 With "Standard" function package Resolutions: 14, 0, 50, and 90 Protective zone height:
Guideline Laser Series
Guideline Laser Series Highly visible alignment laser for visually demanding surfaces Red / Green long visible lines Equal brightness across length of the line Uniform Line (no fading at ends of the line)
CONFIGURABLE SAFETY RELAYS
MSI-s/R, MSI-sx/Rx Configurable MSI provide important functions for the efficient flow of automated production processes Special features Combined guarding types by connecting up to 4 AOPDs Additional
CONFIGURABLE SAFETY RELAYS
MSI-m/R, MSI-mx/Rx Configurable MSI Safety Relay with function for efficient material flow in a packaging application Special features Sequential or Parallel with automatic mode detection MSI-mx for separate
Laser diffuse reflection light scanner with background suppression. Dimensioned drawing
Specifications and description HRTL 3B Laser diffuse reflection light scanner with background suppression Dimensioned drawing We reserve the right to make changes DS_HRTL3B_en.fm en 01-2010/12 50114049
SMART CAMERA SENSORS SMART CAMERA SENSOR FOR VISUAL INSPECTION AND IDENTIFICATION
SMART CAMERA SENSOR FOR VISUAL INSPECTION AND IDENTIFICATION SMART CAMERA SENSORS Cost-effective High performances CMOS 640x480 image sensor Digital I/O RS3 or RS485 Ethernet port for external PC configuration
PD30ETB20xxIS. Photoelectrics, Background Suppression reflective with IR light. Main features. Description
Photoelectrics, Background Suppression reflective with IR light Main features Description The PD30ET... stainless steel sensors are built with high-quality materials and designed for harsh environments.
T-SERIES INDUSTRIAL INCLINOMETER ANALOG INTERFACE
T-SERIES INDUSTRIAL INCLINOMETER ANALOG INTERFACE T-Series industrial inclinometers are compact high performance sensors used to determine inclination in roll and pitch axes with excellent precision and
Description. Dimensions. Features. www.pwb-encoders.com. precision works better
Description The MEC22 is a high resolution optical hollow shaft encoder that can be fixed quickly and easily on different sizes of motor shafts. The encoder provides two square wave outputs in quadrature
Bar Code Reader Series BCL 20 A flexible reader for a variety of applications
Bar Code Reader Series BCL 20 A flexible reader for a variety of applications PRODUCT INFORMATION The benchmark for flexibility. Laser scanners of the BCL 20 series as variable as your requirements demand.
Tilt switches N3 / N4... MEMS technology, one or two axis. Use. Options. + long lifetime and highly reliability due to mechanism-free MEMS technology
Tilt switches MEMS technology, one or two axis N3 / N4... + long lifetime and highly reliability due to mechanism-free MEMS technology + combinable output signals + one or two axis measurement + tilt range
Laserlyte-Flex Alignment System
Laserlyte-Flex Alignment System LaserLyte-Flex The LaserLyte-Flex Alignment System is a unique, interchangeable, low cost plug and play laser system. Designed specifically for aligning and positioning
4 non-safe digital I/O channels 2 IO-Link Master V1.1 slots. Figure 1. Figure 2. Type code. TBPN-L1-FDIO1-2IOL Ident no. 6814053.
PROFINET slave Integrated Ethernet switch 100 Mbps supported 2 x M12, 4-pin, D-coded, Ethernet fieldbus connection Glass-fiber reinforced housing Shock and vibration tested Potted module electronics Protection
Original instructions Protective tube for Orion1B and Orion2 Orion WET-xxx and Orion WET-Kxxx
Original instructions Protective tube for Orion1B and Orion2 Orion WET-xxx and Orion WET-Kxxx While every effort has been taken to ensure the accuracy of information contained in this book and any associated
Industrial Bar Code Scanners
DS6400 Industrial Bar Code Scanners Configuration SW Tool ACR4 technology PackTrack APPLICATIONS Automated warehousing Medium conveyor sorting Reading on forklift trucks Picking systems Automated shop
Original instructions Tina 3A/Aps Adaptor unit
Original instructions Tina 3A/Aps Adaptor unit ABB Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/jokabsafety Read and understand this document Please read and understand this
Fiessler Programmable Safety Center. Flexible Hard- and Software concept. Available with a safe bus system or/and two counter inputs
E L E K T R O N I K Appliance Description Programmable safety center FPSC Fiessler Programmable Safety Center Flexible Hard- and Software concept Available with a safe bus system or/and two counter inputs
LED red (-): Measuring value < lower tolerance threshold LED red (+): Measuring value > upper tolerance threshold. Page 1/6
L-LAS Series L-LAS-LT-165-CL - Line laser 1 mw, laser class 2 - Visible laser line (red light 670 nm), typ. 2 mm x 3 mm - Reference distance approx. 165 mm - Measuring range typ. 65... 265 mm - Resolution
Tina 2A/B Adaptor unit
Original instructions Tina 2A/B Adaptor unit ABB Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/jokabsafety Read and understand this document Please read and understand this
Cross-beam scanning system to detect slim objects. 100 mm 3.937 in
891 Object Area Sensor General terms and conditions... F-17 Related Information Glossary of terms... P.1359~ Sensor selection guide...p.831~ General precautions... P.1405 PHOTO PHOTO Conforming to EMC
Programmable set for Ethernet Modbus/TCP in IP67 TI-BL67-PG-EN-2
Type code Ident no. 1545065 Number of channels 2 Dimensions (W x L x H) 108 x 145 x 77.5 mm CoDeSys-programmable acc. to IEC 61131-3 Cable max. 50 m between interface and read/write head 10/100 Mbps Male
MULTI-BEAM LS10 Light Screen System
For Sensing Small Parts at High Speeds Emitter and receiver pair produce a strobed array of modulated light beams to produce a light screen Simple, economical and highly reliable means of sensing small
How To Use A Flowmeter
INLINE flowmeter for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN) Connection
Set for Profibus DPV1 in IP20 TI-BL20-DPV1-8
Type code Ident no. 1545007 Number of channels 8 Dimensions (W x L x H) 110.3 x 128.9 x 74.4 mm Cable max. 50 m between interface and read/write head 2 decimal rotary coding switches for the adjustment
Contactless Encoder RI360P0-QR24M0-INCRX2-H1181
Compact, rugged housing Many mounting possibilities Status displayed via LED Immune to electromagnetic interference 1024 pulses per revolution (default) 360, 512, 1000, 1024, 2048, 2500, 3600, 4096, parametr.
2/8.10.01. These vacuum switches are used in measuring ranges between -1 and 0 bar.
CATALOGUE > Release 8.5 > Electronic vacuum switches Series SWM Electronic miniature vacuum switches Series SWM These vacuum switches are used in measuring ranges between -1 and 0 bar. Small dimension
W 27-2: The photoelectric switch series with expanded possibilities
W - Photoelectric switches Photoelectric proximity switches, BGS Photoelectric reflex switches Through-beam photoelectric switches W -: The photoelectric switch series with expanded possibilities metres
Barcode positioning systems BPS 8, BPS 34/37 Innovations that truly move you forwards.
Barcode positioning systems BPS 8, BPS 34/37 Innovations that truly move you forwards. PRODUCT INFORMATION Flexible, tolerant and millimetre precision. The Leuze electronic barcode positioning system.
-Encoder with end or hollow shaft ø10-15 mm. hollow shaft ø12 mm -Resolution max. 32 ppr. -Resolution max. 1024 ppr -Magnetic sensing
Incremental encoders Compact configurations Shaft ø4 mm and ø5 mm End shaft ø8-16 mm Hollow shaft ø6-15 mm Optical and magnetic sensing Resolution max. 2048 pulses Rotation speed max. 12000 rpm Protection
g9sp Programmable Safety controllers compact Stand-Alone Programmable controller NEW! example of System configuration G9SP
Programmable Safety controllers g9sp G9SP compact Stand-Alone Programmable controller Stand-alone safety controller for small and mid-sized machinery Easy programming for complex safety control Three types
Introduction to Fiber Optic Cables. Photoelectric Sensors. 2Photoelectric Sensors, Standard Sensors, Fiber optic cables. Please Note!
Photoelectric, Standard, optic cables Photoelectric Introduction to Optic s Optic Diffuse and Thru-Beam Mode In applications involving small targets or unfavorable conditions, fiber optic cables may be
Precision Miniature Load Cell. Models 8431, 8432 with Overload Protection
w Technical Product Information Precision Miniature Load Cell with Overload Protection 1. Introduction The load cells in the model 8431 and 8432 series are primarily designed for the measurement of force
L-LAS-TB-CL serie. laser light curtains for inline measuring tasks
L-LAS-TB-CL serie laser light curtains for inline measuring tasks Maximum distance 2.000 mm Measurement range 6 up to 98 mm Resolution up to 4 µm up to 1,5 khz scan rate 0-10 V or 4-20 ma analogue output
Color Mark Sensor with Red or Green LED E3S-VS
Color Mark Sensor with Red or Green LED Rugged IP67 Color Mark Sensor 1 ms response time Detects a wide variety of color marks PNP or NPN output ls Light-on/ Dark-on operation, wire selectable Vertical
SSC-T800series. New type with radial cross ray method. Light Curtain Sensors. Type. Radial Cross Ray Method. Detecting width. Light axis interval
series Light Curtain Sensors New type with radial cross ray method Small objects and flat tape-like objects detected Convenient simplified wiring requiring no clock (synchronization) line Compact and flat
Selector Switch Type 01
Selector Switch Type 0 Compact positions selector switch,000 switching cycles with up to.0 Ncm switching torque Gold plated contacts: micron Robust metal housing with metal shaft Optional IP front panel
Magnetic proximity switches
Magnetic proximity switches Magnetic proximity switches Overview Page 38 Functional principle and installation Page 39 Cylindrical designs Page 41 Rectangular designs Page 42 37 Kurzübersicht Magnetoresistive
Barcode Reader Series BCL 31, BCL 32, BCL 34
P R O D U C T I N F O R M A T I O N Barcode Reader Series BCL 31, BCL 32, BCL 34 BCL 31, BCL 32 and BCL 34: Barcode readers for universal use in conveyor and storage technology. 3 models: numerous advantages.
Inductive sensor NI10-M18-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Threaded barrel, M18 x 1 Chrome-plated brass DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6 (NA- MUR) M12
TM7BDM8B expansion block - TM7 - IP67-8 DI/DO - 24V DC - 0.5 A - M8 connector
Product datasheet Characteristics TM7BDM8B expansion block - TM7 - IP67-8 DI/DO - 24V DC - 0.5 A - M8 connector Main Range of product Product or component type Range compatibility Enclosure material Bus
Vert-X 16-5V / 10...90% Ub. Applications Servodrives Dancer arm Operating table
Version MH-C MH-C2 Electrical data Measuring range 0... 360 - Indep. linearity % meas. range ±0.3 - Max. hysteresis 0.1 - Resolution bit 12 - Max. repeatability 0.1 - Sample rate fast mode khz (5) - Sample
TECHNICAL DATASHEET Incremental Encoder RI 58-O / RI 58-T
Universal industry standard encoder Up to 40 000 steps with 0 000 pulses High signal accuracy Protection class up to IP67 Flexible due to many flange and configuration variants Suitable for high shock
Throughbeam photoelectric sensors. Dimensioned drawing. Electrical connection
Specifications and description Leuze electronic LS 78 Throughbeam photoelectric sensors Dimensioned drawing 180m 10-30 V DC! Voltage range from 12 30VDC with NPN, PNP and/or relay outputs! Light/dark switching!
3-Component Measuring System
Force 3-omponent Measuring System for utting Force Measurement During Turning Modular system for measurement of cutting forces when turning outside and inside diameters on turret lathes. Machine adapters
5-port / 8-port 10/100BaseTX Industrial Ethernet Switch User Manual
5-port / 8-port 10/100BaseTX Industrial Ethernet Switch User Manual Content Overview... 1 Introduction... 1 Features... 3 Packing List... 4 Safety Precaution... 4 Hardware Description... 5 Front Panel...
Three Channel Optical Incremental Encoder Modules Technical Data
Three Channel Optical Incremental Encoder Modules Technical Data HEDS-9040 HEDS-9140 Features Two Channel Quadrature Output with Index Pulse Resolution Up to 2000 CPR Counts Per Revolution Low Cost Easy
Fiessler Programmable Safety Center. Flexible Hard- and Software concept. Expandable with a safe bus system
E L E K T R O N I K Appliance Description Programmable safety center FPSC Fiessler Programmable Safety Center Flexible Hard- and Software concept Expandable with a safe bus system Reduction of expenditures
How To Make An Ultrasonic Sensor
crm+ ultrasonic sensors Microsonic : TR Electronic: Tel: +49 231 975151-0 USA: 248-244-2280 Fax: +49 231 975151-51 Canada: 519-452-1233 www.microsonic.de www.trelectronic.com info@microsonic.de Description
NX safety stand-alone
NX-S@ NX safety stand-alone stand-alone into machine automation Expandable safety system up to 32 safety connections or 63 standard connections controller flexible system lets your freely mix safety I/O
Reaction Torque Sensor
Force 1 1 N m up to 1 000 1 000 N m Type 9329A 9389A These easy to install piezoelectric reaction torque sensors are particularly suitable for measuring rapidly changing torques at non-rotating shafts.
VISION. Data VS2 DATAVS2
DATAVS2 The DataVS2 vision sensor series presents all the characteristics to solve machine vision applications in a flexible and intuitive way. DataVS2 is a completely embedded device: the optic, the LED
Series 6000 Torque measured metal bellow coupling
Properties Free of float metal bellow coupling with integrated torque measurement Non-contact measurement system, high robustness High torsional stiffness Limited torque of inertia Performance Measurement
Selector Switch Type 08
Compact and versatile 2 positions multi wafer selector switch For PCB mounting 25,000 switching cycles with up to 9.0 Ncm switching torque Gold plated contacts: micron Robust metal housing with metal shaft
TECHNICAL DATASHEET Incremental Encoder RI 58-H
Through hollow shaft High accuracy by means of integrated flexible coupling Safe shaft mounting Applications: textile machines, motors, drives, copiers NUMBER OF PULSES 1 / 2 / 3 / 4 / 5 / 10 / 15 / 20
Inductive Proximity Sensors
The New Family of General Purpose Economical Sensors from TR Electronic Inductive Proximity Sensors www.trelectronic.com customercare@trelectronic.com USA TOLL FREE: 800.709.3300 TEL: 248 244 2280 FAX:
Industrial Bar Code Scanners
DS2100N & DS2400N Industrial Bar Code Scanners Enhanced Connectivity Ease of use Configuration SW Tool ACR-Lite APPLICATIONS Small conveyor sorting Picking systems Items and parts tracking Process control
Turbine Flow Sensor Series VTR
Turbine Flow Sensor Series VTR SIKA Turbine Flow Sensor Series VTR Extra robust, impressively precise SIKA s VTR turbine flow sensor allows you to determine precisely, dependably and easily the flow rates
Set for PROFINET IO in IP20 TI-BL20-EN-PN-4
Cable max. 50 m between interface and read/write head Connection of up to 4 read/write heads via BL ident extension cables Mixed operation of HF and UHF read/ write heads Connectors /S2500 Type code Ident
W150: Miniature photoelectric switch series with completely integrated electronics
Product group W50 Photoelectric proximity switch BGS Photoelectric proximity switch energ. Photoelectric reflex switch W50: iniature photoelectric switch series with completely integrated electronics Through-beam
E3T Miniature Photoelectric Sensors
E3T Miniature Photoelectric Sensors Ultra-Compact with Visible Red Beam»» Ultra slim to fit and perform where others won't»» Visible red beam for simple set-up»» Five different sensing methods E3T Miniature
How To Power A Schen
Automation / Mini Type SCH32F Hollow Shaft Encoder - Ø 32 mm Hollow Bore: Ø 6 mm to Ø 3/8 inch Resolution up to 5000 ppr IP 65 (IP 50 for IDC connector option) Electrical Specifications Code: Resolution:
BUILDING INSTRUCTIONS
etap2hw 38 mm I2C to LCD Interface BUILDING INSTRUCTIONS October 2013 P. Verbruggen Rev 1.01 15-Oct-13 Page 1 Table of Contents Chapter 1 General Information 1.1 ESD Precautions 1.2 Further Supplies 1.3
Repeaters and Mimics Data Sheet
Repeaters and Mimics Data Sheet IDR series repeaters and mimics allow vital information from a Notifier fire system to be communicated to points around a building remote from the fire alarm control panel.
Material: Weight: Bearing Life: Shaft Speed: Starting Torque: Mass Moment of Inertia: Shaft Loads:
Automation / Mini Type SCH32F Hollow Shaft Encoder - Ø 32 mm Hollow Bore: Ø 6 mm to Ø 3/8 inch Resolution up to 5000 ppr IP 65 (IP 50 for IDC connector option) Electrical Specifications Code: Resolution:
Miniature High-Resolution Registration Mark Sensor White LED AUTOSET Remote Setup Option
REGISTRATION MARK SENSORS MARK EYE PRO 2 Miniature High-Resolution Registration Mark Sensor White LED AUTOSET Remote Setup Option Registration Mark Photoelectric Sensors 2-115 High-Resolution Registration
Long sensing range. Most suitable for conveyor lines and parking lot applications. 10 m 32.808 ft (Red LED)
NX SERIES Compact Multi-voltage Photoelectric Power Supply Built-in Multi-voltage photoelectric sensor usable worldwide Conforming to ow Voltage and EMC Directive Multi-voltage The NX series can operate
HSP GmbH Zum Handwerkerhof 2 90530 Wendelstein Tel. 09129 / 2852-0 Fax: 09129 / 2852-11 Web: www.hsshsp.de EMAIL: HSP@hsshsp.de NTG-3000.
NTG-3000 Transducer Data Sheet Document Version 2.8 Page 1 of 10 Versions / Revisions: Document Creation Author Description version date 2.0 2012-07-25 P. Compensis First official version 2.1 2012-08-24
MICROSENS. Central 48 V DC Power Supplies for PoE-Components. Description. Features
Central 48 V DC Power Supplies for PoE-Components MICROSENS Description Active network equipment which is supporting the Power-over-Ethernet functions, typically requires a powerful 48 V DC power supply.
Industrial Bar Code Scanners
DS4800 Industrial Bar Code Scanners Enhanced Connectivity Ease of use Configuration SW Tool ACR4 technology Smart focus adjustment APPLICATIONS Automated warehousing Reading on pallets Picking systems
Capacitive Prox E2K-X
Capacitive Prox Threaded, Cylindrical Sensor Detects Metallic and Non-metallic Objects Permits non-contact detection of metallic and non-metallic objects such as glass, wood, water, oil and plastic Allows
Clear Glass Sensor. Ordering Information E3S-CR67/62. Optimum Sensor for Detecting Transparent Glass and Plastic Bottles
Clear Glass Sensor Optimum Sensor for Detecting Transparent Glass and Plastic Bottles E3S-CR67/62 Retroreflective Sensor smoothly detects 5-mm gaps. Detects transparent bottles that have a lens effect.
Application book Material Handling: forklifts. Inductive Sensors. Proximity Sensor
Application book Material Handling: forklifts Inductive Sensors Proximity Sensor Catalogue Cod. CAT3E001261659 Application book - Inductive Sensors - English - Ed.01/2012 2/3 application book inductive
Weighing terminals IP69K GMP EHEDG NSF. Precision in stainless steel Easy to clean perfect hygiene
Weighing terminals The stainless steel weighing terminals of the 4 Series: IND429, IND439 and IND449 The optimal solution for demanding applications in the food, pharmaceutical and chemical industries.
Programmable set for Ethernet Modbus/TCP in IP20 TI-BL20-PG-EN-8
CoDeSys-programmable acc. to IEC 61131-3 Cable max. 50 m between interface and read/write head 10/100 Mbps LEDs for display of supply voltage, group and bus errors as well as status and diagnostics Connection
AS-i 3.0 PROFIBUS Gateways with integrated Safety Monitor
AS-i 3.0 Gateways AS-i 3.0 Gateways 2 / 1 AS-i Master, Slave 1 AS-i Safety Monitor for 2 s Operation using a single Monitor! Monitor processes safety slaves on two s Coupling between the two networks superfluous
LENORD. +BAUER... automates motion. PowerDRIVE-Positioning GEL 6109 Compact positioning drive for installation situations with limited space
PowerDRIVE-Positioning GEL 6109 Compact positioning drive for installation situations with limited space LENORD +BAUER... automates motion. Technical information Version 2014-09 General The PowerDRIVE-Positioning
The quadrature signals and the index pulse are accessed through five 0.025 inch square pins located on 0.1 inch centers.
Quick Assembly Two and Three Channel Optical Encoders Technical Data HEDM-550x/560x HEDS-550x/554x HEDS-560x/564x Features Two Channel Quadrature Output with Optional Index Pulse Quick and Easy Assembly
Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592. * see variants. Applications.
Safety Technique SAFEMASTER Emergency Stop Module BG 5924, IP 5924 Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592 BG 5924 IP 5924 Product Description
Series 7500 Torque Sensor
Properties PTO (Power Take-Off) shaft with integrated torque and angle measurement Non-contact measurement system, high robustness Plug & Play solution, no additional electronics required Performance Measurement
Directory chapter 02 - DIN Power (to 6 A) Types D, E, F, FM, 2F, F9, interface connectors I/U 02. 01. Technical characteristics types D and E... 02.
Directory chapter 02 - () Types D, E, F, FM, 2F, F9, interface connectors I/U Page Technical characteristics types D and E.............................. 02.10 Type D connectors.................... 02.11
Appearance Type Setting distance Sensing area Model Remarks Camera with lighting. 34mm to 49mm 5mm x 4.9mm to 9mm x 8.
ZFX-C/25-CD Easy Vision Touch, Connect & Go Easy vision intuitive teach & go user interfaces Live built-in LCD touch monitors for setup and iediate feedback Counication centralized setup & inspection via
How To Control A Power Supply With A Mini Transmitter And Switch (Power Supply)
transmitter (2 wire) / switch for continuous or On/Off Control Indication, monitoring, transmitting and continuous or On/Off control in one device Output signal 4...20 ma, 2-wire for continuous control
Presence Sensing Safety Devices
Table of Contents Presence Sensing Safety Devices Selection Criteria Selection Flowchart...2-2 Selection Tips...2- Selection Navigator...2-4 Technology Overview...2-6 Opto-electronics Overview... 2-8 POC
Sense it! Connect it! Bus it! Solve it! EncoderS
Sense it! Connect it! Bus it! Solve it! EncoderS Incremental encoders Incremental encoders use electrical pulses to measure rotation speed or position. The dual-channel incremental encoders of the Ri series,
Capacitive Proximity Sensors Theory of Operation
Capacitive Proximity Sensors Theory of Operation Capacitive proximity sensors are similar to inductive proximity sensors. The main difference between the two types is that capacitive proximity sensors
Appearance Type Setting distance Sensing area Model Remarks Camera with lighting. 34mm to 49mm 5mm x 4.9mm to 9mm x 8.
ZFX-C10/15-CD Easy Vision Touch, Connect & Go Easy vision intuitive teach & go user interfaces Live built-in LCD touch monitors for setup and iediate feedback Counication centralized setup & inspection
HARTING Ethernet Cabling 4-poles Overview
Overview RJ45 Connectors [on page 8] System cables [on page 10] Distribution modules and Outlets [on page 20] HARTING PushPull Connectors [on page 22] System cables [on page 24] Panel feed-throughs [on
Technical catalogue convectors POLAND 2012
Technical catalogue convectors POLAND 2012 index convectors review...3 Narbonne...4 Narbonne VT... 10 Narbonne V... 16 Narbonne V VT... 20 mounting distances for Narbonne...26 mounting distances for Narbonne
Pressure transmitter For general industrial applications Model A-10
Electronic pressure measurement Pressure transmitter For general industrial applications Model A-10 WIKA data sheet PE 81.60 for further approvals see page 9 Applications Machine building Shipbuilding
Programmable Terminal. NPSeries. Easy Setup with the Low-cost, Compact NP Series
Programmable Terminal NPSeries Easy Setup with the Low-cost, Compact NP Series Simpler and More Versatile.OMRON s Compact NP Series Connect! Easier connection to OMRON PLCs and Temperature Controllers,