COSVR663 - SQA Unit Code H4HP 04 Inspect plant or machinery for operational serviceability
|
|
|
- Clarence Gilbert
- 7 years ago
- Views:
Transcription
1 Inspect plant or machinery for operational serviceability Overview This standard is about 1 interpreting information 2 adopting safe and healthy working practices 3 selecting materials, components, consumables and equipment 4 inspecting plant or machinery for operational serviceability COSVR663 1
2 Performance criteria You must be able to: P1 interpret the given information relating to the work and resources to confirm its relevance P2 comply with the given, relevant legislation and official guidance to carry out your work and maintain safe and healthy work practices P3 select the required quantity and quality of resources for the methods of work P4 comply with organisational procedures to minimise the risk of damage to the work and surrounding area P5 comply with the given contract information to carry out the work efficiently to the required specification P6 complete the work within the allocated time, in accordance with the programme of work COSVR663 2
3 Knowledge and understanding Performance Criteria 1 Interpretation of information K1 the organisational procedures developed to report and rectify inappropriate information and unsuitable resources, and how they are implemented K2 the types of information, their source and how they are interpreted K3 the organisational procedures to solve problems with the information and why it is important they are followed Performance Criteria 2 Safe work practices K4 the level of understanding operatives must have of information for relevant, current legislation and official guidance and how it is applied K5 how emergencies should be responded to and who should respond K6 the organisational security procedures for tools, equipment and personal belongings K7 what the accident reporting procedures are and who is responsible for making the report K8 why, when and how health and safety control equipment should be used Performance Criteria 3 Selection of resources K9 the characteristics, quality, uses, sustainability, limitations and defects associated with the resources and how defects should be rectified K10 how the resources should be used and how any problems associated with the resources are reported K11 the organisational procedures to select resources, why they have been developed and how they are used K12 the hazards associated with the resources and methods of work and how they are overcome COSVR663 3
4 Performance Criteria 4 Minimise the risk of damage K13 how to protect work from damage and the purpose of protection K14 why disposal of waste should be carried out safely and how it is achieved Performance Criteria 5 Meet the contract specification K15 how methods of work, to meet the specification, are carried out and problems reported K16 how maintenance of tools and equipment is carried out Performance Criteria 6 Allocated time K17 what the programme is for the work to be carried out in the estimated, allocated time and why deadlines should be kept COSVR663 4
5 Additional Information Scope/range related to performance criteria Performance Criteria 1 1 interpretation of drawings, specifications, schedules, method statements, risk assessments, workshop manuals, technical service bulletins, parts manuals and manufacturers' information related to the work to be carried out Performance Criteria 2 2 avoidance of risk by complying with the given information relating to at least five of the following 2.1 methods of work 2.2 safe use of health and safety control equipment 2.3 safe use of access equipment 2.4 safe use, storage and handling of materials 2.5 safe use and storage of tools and equipment 2.6 specific risks to health Performance Criteria 3 3 selection of resources associated with own work 3.1 materials, components and fixings 3.2 tools and equipment 3.3 consumables Performance Criteria 4 4 protection of the work and its surrounding area from damage 5 minimise damage and maintain a clean work space 6 disposal of waste in accordance with current legislation Performance Criteria 5 7 demonstration of work skills to inspect, check, record, report 8 use and maintain hand tools, specialist tools, portable power tools and ancillary equipment 9 complete the following inspections to given working instructions 9.1 routine checks, daily, weekly 9.2 periodic e.g. monthly, annual, number, hours run 9.3 pre-use, delivery 9.4 post-use, return, off hire 10 record and report results and findings Performance Criteria 6 11 completion of own work within the estimated, allocated time to meet the needs of other occupations and/or client COSVR663 5
6 Scope/range related to knowledge and understanding Disposal of waste 1 environmental responsibilities, organisational procedures, manufacturers information, statutory regulations and official guidance Emergencies 2 operative's response to situations in accordance with organisational authorisation and personal skills when involved with 2.1 fires, spillages, injuries 2.2 emergencies relating to occupational activities Hazards 3 those identified by risk assessment, method of work, manufacturers technical information, statutory regulations and official guidance Health and safety control equipment 4 identified by the principles of protection for occupational use, types and purpose of each type, work situations and general work environment 4.1 collective protective measures 4.2 personal protective equipment (PPE) 4.3 respiratory protective equipment (RPE) 4.4 local exhaust ventilation (LEV) Information 5 drawings, specifications, schedules, method statements, risk assessments, workshop manuals, technical service bulletins, parts manuals, manufacturers' information and current regulations associated with the inspection, examination and test of plant and machinery Legislation and official guidance 6 this relates to the operative's responsibilities regarding potential accidents and health hazards whilst working in the workplace, below ground level, in confined spaces, at height, with tools and equipment, with materials and substances, with movement/storage of materials and by manual handling and mechanical lifting Maintenance 7 operative care of hand tools, specialist tools, portable power tools and ancillary equipment COSVR663 6
7 Methods of work 8 application of knowledge for safe and healthy work practices, procedures and skills relating to the method/area of work and materials used to: 8.1 identify inspection criteria 8.2 conduct inspections, daily/weekly, periodic (monthly, annual, number and hours run), pre-use and post-use and returned items 8.3 check the calibration of inspection tools and equipment 8.4 use specialist inspection equipment and test and diagnostic aids 8.5 identify deterioration, damage, excess wear and leaks 8.6 identify non-critical defects 8.7 identify critical defects 8.8 classify the serviceability of plant and machinery 8.9 consider plant and machinery life expectancy 8.10 report findings 8.11 use hand tools, portable power tools, specialist tools and equipment 8.12 work at height 8.13 use access equipment 8.14 complete and maintain records 9 team work and communication 10 needs of other occupations associated with the inspection of plant and machinery Problems 11 those arising from information, resources and methods of work 11.1 own authority to rectify 11.2 organisational reporting procedures Programme 12 types of progress charts, timetables and estimated times 13 organisational procedures for reporting circumstances which will affect the work programme Protect work 14 protect work against damage from general workplace activities, other occupations and adverse weather conditions COSVR663 7
8 Resources 15 materials, components and equipment relating to types, quantity, quality, sizes and the sustainability of standard and/or specialist: 15.1 consumables 15.2 inspection equipment 15.3 fixings 15.4 hand tools, portable powered tools, specialist tools and equipment 16 methods of calculating quantity, length, area and wastage associated with the method/procedure to inspect plant and machinery for operational serviceability Security procedures 17 site, workplace, company and operative COSVR663 8
9 Developed by ConstructionSkills Version number 2 Date approved December 2012 Indicative review date Validity Status Originating organisation Original URN Relevant occupations Suite Key words December 2017 Current Original ConstructionSkills COSPM09 Plant Maintenance, Construction and Building Trades Construction Plant or Machinery Maintenance; Live Events; Plant Installations Plant inspection; Machinery inspection; Routine; Periodic; Pre-use; Post-use; Maintenance; Serviceability; Live Events, Exhibitions; COSVR663 9
COSVR404 Erect and dismantle plant (cranes and rigs)
Overview This standard is about interpreting information, adopting safe, healthy and environmentally responsible work practices, selecting materials, components, plant, tools and ancillary equipment, preparing
PROMG4 Install mining backup services
Overview This standard is about: 1 interpreting information 2 adopting safe and healthy working practices 3 selecting materials, components and equipment 4 preparing, installing, using and removing below
Level 2 NVQ Diploma in Trowel Occupations (Construction) (6570-02) May 2014 Version 2.0
QUALIFICATION HANDBOOK Level 2 NVQ Diploma in Trowel Occupations (Construction) (6570-02) May 2014 Version 2.0 Qualification at a glance Subject area City & Guilds number 6570 Age group approved 16-18,19+
Unit Title: Unit purpose and aim
Unit Title: Preparing and Operating Telescopic Handlers to Lift and Transfer Loads in the Workplace Level: 2 Credit value: 25 Guided learning hours: 83 Unit expiry date: 31/10/2014 Unit purpose and aim
Unit Title: Unit purpose and aim
Unit Title: Preparing and Operating Sideloader Forklifts to Lift and Transfer Loads in the Workplace Level: 2 Credit value: 16 Guided learning hours: 53 Unit expiry date: 31/10/2014 Unit purpose and aim
SCDHSC0032 Promote health, safety and security in the work setting
Promote health, safety and security in the work setting Overview This standard identifies the requirements when you promote the health, safety and security of yourself and others for whom you are responsible
SFS SYS 13 (SQA Unit Code - H4GR 04) Maintain the performance of electronic security systems
Maintain the performance of electronic security systems Overview This NOS sets out the skills, knowledge and understanding for you to maintain the operational performance of electronic security systems,
SKACH11 Hair colour correction services
Overview This standard is about the advanced skills necessary to determine and correct more complex colouring problems. To achieve this standard, you must be able to remove artificial colour, remove bands
EUSNCO309 (SQA Unit Code - FA9F 04) Monitor the installation process for Network Construction Operations
Monitor the installation process for Network Construction Operations Overview This unit is designed for the candidate to demonstrate the effectiveness of the installation and construction process by monitoring
QUALIFICATION HANDBOOK
QUALIFICATION HANDBOOK Level 2 and 3 NVQ Certificate in Rail Engineering Traction and Rolling Stock (7597-05/10) September 2011 Version 1.1 (September 2011) Qualification at a glance Subject area Rail
Pollution Incident Response Plan
Pollution Incident Response Plan Introduction Schmidt Quarries is committed to ensuring all aspects of our quarrying activities comply with the environmental legislative requirements in NSW. This Pollution
ASTCCR2 - SQA Unit Code H548 04 Carry out and complete clean-room cleaning operations
Carry out and complete clean-room cleaning Overview 1 Carry out clean-room 2 Remove and store equipment, tools and materials after clean-room 3 Remove and dispose of contaminated material after clean-room
BRO Roles & Responsibilities Form Page 1 of 9
BRO Roles & Responsibilities Form Page 1 of 9 This document must identify the (s) and/or the person delegated to undertake the duties listed below. These duties are required by legislation and/or Council
SEMFWE232 SQA Unit Code H2BN 04 Cutting plate and sections using shearing machines
Overview This standard identifies the competencies you need for cutting and shaping metal plate and sections (3 mm thickness and above) for fabrications using guillotines and section cropping machines,
ASTFFL6 - SQA Unit Code H54H 04 Prepare for flood damage emergencies
Overview 1 2 3 ASTFFL6 1 Performance criteria P1 P2 P3 confirm that you have the correct tools and equipment for the type of flood emergency you are likely to encounter confirm that you are authorised
OSHA Compliance Checklist ASC
OSHA Compliance Checklist ASC Date Inspectors Facility OSHA is the agency responsible for establishing and enforcing standards that will make the workplace safe and healthful for the employees. The way
Unit LT01 Carry Out Routine Lift Truck Maintenance
Unit LT01 Carry Out Routine Lift Truck Maintenance UNIT OVERVIEW This unit is about conducting routine maintenance, adjustment and replacement activities as part of the periodic servicing of Lift Trucks.
OH&S MANAGEMENT SYSTEM CHECKLIST - AS 4801:2001 (STATUS A = Acceptable; N = Not Acceptable; N/A = Not Applicable)
OH&S MANAGEMENT SYSTEM CHECKLIST - AS 4801:2001 (STATUS A = Acceptable; N = Not Acceptable; N/A = Not Applicable) 4.1 General Requirements 4.2 OHS policy Has the organisation an established and maintained
Risk management a practical approach
Risk management a practical approach Introduction Preventing work related accidents and injuries is the primary concern for all those involved in health and safety. Work related accidents and injuries
Cleaning and Support Services / Cleaning Services Supervision National Occupational Standards
Cleaning and Support Services / Cleaning Services Supervision National Occupational Standards Contents C1 02 Maintain Personal Hygiene Standards when Cleaning... 3 C1 03 Do your job in a customer friendly
Safety Systems Review Facilities Management Guidance and specification Version 1 2014
Safety Systems Review Facilities Management Guidance and specification Version 1 2014 Membership Training Qualifications Audit and Consultancy Policy and Opinion Awards Contents Page Safety Systems Review
Health and Safety Policy and Guidance for Personal Protective Equipment
Health and Safety Policy and Guidance for Personal Protective Equipment Document Reference: H&S No.5/03 This document includes a statement of Policy of Glasgow Caledonian University together with summary
Level 2 NVQ Diploma in Maintenance Operations (Construction) (6562-02) July 2013 Version 2.0
QUALIFICATION LOGBOOK Level 2 NVQ Diploma in Maintenance Operations (Construction) (6562-02) July 2013 Version 2.0 Candidate Logbook/Work-Based Evidence Record Mandatory Units About City & Guilds As the
Lifting Equipment - Work equipment for lifting or lowering loads and includes its attachments used for anchoring, fixing or supporting it.
LIFTING EQUIPMENT POLICY Background and Legislation The Lifting Operations and Lifting Equipment Regulations 1998 (LOLER) apply in all premises and work situations subject to the Health and Safety at Work,
ASTFFL1 - SQA Unit Code H54C 04 Respond to requests for fire damage limitation work
Overview This standard is about responding to requests for fire damage limitation work. It includes confirming the details of fire damage limitation jobs, agreeing an initial plan of action and making
OCCUPATIONAL HEALTH AND SAFETY Global Policy
OCCUPATIONAL HEALTH AND SAFETY Global Policy Each of us should behave in a manner that promotes a positive safety culture Our commitment Diageo is firmly committed to ensuring the occupational health,
SEMPEO1-35 - SQA Unit Code H034 04 Applying heat treatment to engineering materials
Overview This standard covers a range of basic competences that you need, to apply specified heat treatment processes to engineering materials/components. It will prepare you for entry into the engineering
Workshop Self Inspection Checklist WORK01
Workshop Self Inspection Checklist WORK01 General Mechanical Workshops Location Assessor Date This core checklist is provided by the Health and Safety Department as a template, which provides a basic framework
POLICY ON OCCUPATIONAL HEALTH AND SAFETY RISK MANAGEMENT
THE NORTHCOTT SOCIETY POLICY ON OCCUPATIONAL HEALTH AND SAFETY RISK MANAGEMENT VOLUME: 2 Policy on Management and Organisational Issues SECTION: B Occupational Health & Safety & Workers Compensation SUB-SECTION:
CFAMLE6 Ensure health and safety requirements are met in your area of responsibility
Ensure health and safety requirements are met in your area of Overview This unit is concerned with managing the overall health and safety process in your area of. It is intended to go beyond meeting health
WORKING IN CONFINED SPACES GUIDELINES
WORKING IN CONFINED SPACES GUIDELINES Contents 1 Introduction... 2 2 Scope... 2 3 Definitions... 2 4 Responsibilities... 3 4.1 Permit Authoriser... 3 4.2 Permit Receiver... 3 4.3 Responsible UOW Officer...
A Short Guide to The Safety, Health and Welfare at Work Act, 2005
A Short Guide to The Safety, Health and Welfare at Work Act, 2005 3 A Short Guide to the Safety, Health and Welfare at Work Act, 2005 Published in August 2005 by the Health and Safety Authority, 10 Hogan
CHAGUARAMAS TERMINALS LTD.
POLICY MANUAL All rights reserved to CrewsInn Limited. No part of this document may be reproduced in any form or by any means, without permission in writing from the company CHAGUARAMAS TERMINALS LTD.
Health and safety policy
1. General statement of intent The Company recognises and accepts its responsibilities as an employer to ensure, so far as is reasonably practicable, the health, safety and welfare of its employees and
Health and Safety Policy
Health and Safety Policy Status: Final Next Review Date: Apr 2014 Page 1 of 16 NHS England Health and Safety: Policy & Corporate Procedures Health and Safety Policy Policy & Corporate Procedures Issue
Elements of an Occupational Health and Safety Program
Occupational Health and Safety Division Elements of an Occupational Health and Safety Program Table of Contents Introduction 3 What workplaces must have a program? 5 What criteria must the program meet?
CONTENTS. Page. Last Updated: May 2015 2
Health & Safety Policy Technology Curriculum Area 2015-2016 CONTENTS Page 1. The role of this policy... 3 2. General aims... 3 3. Health and safety roles... 3 4. Training policy... 4 5. Risk assessments...
SAFETY and HEALTH MANAGEMENT STANDARDS
SAFETY and HEALTH STANDARDS The Verve Energy Occupational Safety and Health Management Standards have been designed to: Meet the Recognised Industry Practices & Standards and AS/NZS 4801 Table of Contents
WORKPLACE HEALTH AND SAFETY AUDITING GUIDELINES
WHS UNIT WORKPLACE HEALTH AND SAFETY AUDITING GUIDELINES Contents 1 Purpose... 1 2 Scope... 1 3 Definitions... 1 4 Responsibilities... 1 4.1 WHS Unit... 1 4.2 Auditor(s)... 1 4.3 Managers of Faculties
Guidance to Prevent Slips, Trips & Falls
Guidance to Prevent Slips, Trips & Falls Published June 2005 CONTENTS 1. Scope of this guidance 2. New plant/ installations 3. Maintenance 4. Housekeeping 1. Scope of this guidance Slips, trips and falls
SEMME3012 Installing marine lighting, alarm, detection and monitoring equipment and systems
Installing marine lighting, alarm, detection and monitoring equipment and Overview This standard identifies the competences you need to install marine lighting, alarm, detection and monitoring, in accordance
Risk Management Guidelines
Reporting Bodily Injury Claims Introduction Despite all your best efforts incidents resulting in injury and disease may occur to people due to your business activities. Prompt investigation and reporting
Level 2 NVQ in Refrigeration and Air Conditioning
Level 2 NVQ in Refrigeration and Air Conditioning Small Commercial Refrigeration and Air Conditioning Systems (6087-02) National occupational standards units (Assessment and evidence requirements) www.cityandguilds.com
Managing Occupational Safety and Health in Schools
Managing Occupational Safety and Health in Schools Occupational Safety and Health Branch Labour Department This Guide is prepared by the Occupational Safety and Health Branch, Labour Department. This Edition
Communication of Health and Safety Policy and Information
Modules 1 4 1. Communication of Health and Safety Policy and Information 2. Allocation of Responsibility/Accountability for Health and Safety 3. Purchasing Controls 4. Contractors Communication of Health
University of Wisconsin-Stout. Occupational Safety & Health Plan. Overview
University of Wisconsin-Stout Occupational Safety & Health Plan Overview Wisconsin Statutes 101.055 and Wisconsin Administrative Code (Comm 32.11) require all public employers to develop and implement
Slips, Trips and Falls Policy. Documentation Control
Documentation Control Reference HS/SP/015 Date approved 23 Approving body Directors Group Implementation date 23 Supersedes Version 2 (March 2010) Consultation undertaken Trust Health and Safety Committee
City of Belmont Contractor Induction Program
City of Belmont Contractor Induction Program Page 1 of 17 14 March 2011 Source: OSH Date: 13/12/2013 City of Belmont Contractor Induction Program Table of Contents TABLE OF CONTENTS... 1 INTRODUCTION...
Jonathan Wilson. Sector Manager (Health & Safety)
Jonathan Wilson Sector Manager (Health & Safety) OHSAS 18001:2007 Making Life Easier For Health & Safety Managers Workshop Agenda 1. Introduction 2. Why Manage Health & Safety 3. OHSAS 18001 and OHSMS
QUALIFICATION HANDBOOK
QUALIFICATION HANDBOOK Level 2 Certificate and Diploma in Light Vehicle Maintenance & Repair Principles (4290-12/17) March 2011 Version 2.3 (September 2011) Qualification at a glance Subject area City
A Safe and Healthy Workplace
Section 1 A Safe and Healthy Workplace Why is Health and Safety Important? Health and Safety is the subject of many laws and regulations, failure to comply with the law renders companies and individuals
32 PROMOTE, MONITOR AND MAINTAIN HEALTH, SAFETY AND SECURITY IN THE WORKING ENVIRONMENT
Unit overview Elements of competence 32a 32b 32c Monitor and maintain the safety and security of the working environment Promote health and safety in the working environment Minimise risks arising from
Maintenance Strategy 2015 Owner: Kevin Bullimore Head of Infrastructure Next review 2020
Maintenance Strategy 2015 Owner: Kevin Bullimore Head of Infrastructure Next review 2020 Page 1 of 7 Maintenance Strategy Introduction The requirement for maintenance of premises, plant and equipment arises
COGMWT2 - SQA Unit Code D7SD 04 Perform post-job (mechanical wireline) operations
Overview This unit is about performing post-job operations. You will be involved in activities such as: 1 rigging down mechanical wireline equipment 2 demobilising and storing mechanical wireline equipment
TAKE FOR SAFETY. 1. Stop, step back, observe 2. Think through the task 3. Identify any hazards 4. Control the hazards 5. Complete the task safely
TAKE 5 FOR SAFETY 1. Stop, step back, observe 2. Think through the task 3. Identify any hazards 4. Control the hazards 5. Complete the task safely The purpose of Take 5 is to ensure that all work activities
1. 2. Health, safety and. Unit 1: Principles of personal responsibilities and how to develop and evaluate own performance at work
1. 2 security Health, safety and procedures All employers and employees have a responsibility to adhere to the legislation that affects them, such as: health and safety legislation, which may relate to
Lone Working Guidance
Document control information Published document name: loneworking-gn.pdf Date issued: October 2013 Version: 8.0 Previous review dates: Next review date: Related documents: Governing policy: Guidance to
SFJCCAD2 Promote business continuity management
Overview This unit is about providing advice and assistance on business continuity management, including general advice for the business and voluntary sectors, and specific advice and assistance to individual
SEMPEO2-54 - SQA Unit Code FP47 04 Carrying out heat treatment of engineering materials
Overview This standard covers a broad range of basic competences that you need, to apply specified heat treatment processes to engineering materials/components. It will prepare you for entry into the engineering
INDEX 1.0 HEALTH, SAFETY & ENVIRONMENT 1.1 INTRODUCTION 1.2 OBJECTIVES 1.3 HEALTH, SAFETY & ENVIRONMENT STATEMENT 1.4 ENVIRONMENTAL STATEMENT
INDEX 1.0 HEALTH, SAFETY & ENVIRONMENT 1.1 INTRODUCTION 1.2 OBJECTIVES 1.3 HEALTH, SAFETY & ENVIRONMENT STATEMENT 1.4 ENVIRONMENTAL STATEMENT 2.0 HEALTH, SAFETY & ENVIRONMENT MANUAL 2.1 HAZARD MANAGEMENT
Six steps to Occupational Health and Safety
Six steps to Occupational Health and Safety This booklet gives basic guidelines for workplace health and safety systems to help industry in NSW comply with the "duty of care" principle outlined in the
AS/NZS 4801:2001. Safety Management Systems (SMS) Self-Assessment Checklist. Revision 1 (January 2014)
AS/NZS 4801:2001 Safety Management Systems (SMS) Self-Assessment Checklist This document restates the requirements of AS/NZS 4801:2001 for Safety Management Systems (SMS) and has been developed to assist
Health & Safety Course Descriptions. Health & Safety
Course Descriptions A range of high quality intranet and web deliverable Health and Safety courses, concentrates on making the workplace safer more healthy. The courseware is aimed at all levels of staff
School or service safety advisor (SSA) role
School or service safety advisor (SSA) role Document control information Published document name: ssa-role-gn Date issued: January 2012 Version: 1.0 School or service safety advisor (SSA) role Previous
Hazard Identification, Risk Assessment And Control Procedure
Hazard Identification, Risk Assessment And Control Procedure 1. Purpose 1.1 To ensure that there is a formal process for hazard identification, risk assessment and control to effectively manage hazards
Health and Safety Policy Part 1 Policy and organisation
Health and Safety Policy Part 1 Policy and organisation ICO H&S Policy Policy and organisation, June 2014 Page 1 of 6 1. Scope 1.1 The Health and Safety policy applies to all employees of the Information
Corporate Health and Safety Policy
Corporate Health, Safety & Wellbeing Service Corporate Health and Safety Policy Contents 1. Introduction... 2 2. Policy Statement... 2 3. Scope... 3 4. Definition of Manager... 4 5. Responsibilities...
Preventing slips and trips at work A brief guide
Preventing slips and trips at work A brief guide What is this leaflet about? Slips and trips are the most common cause of injury at work. On average, they cause 40 per cent of all reported major injuries
Chapter 16: Sub-Contractor Management Plan
: Chapter Content CHAPTER CONTENT... 16.1 16.1 SUB-CONTRACTOR MANAGEMENT PLAN... 16.2 16.2 SUB-CONTRACTOR INFORMATION... 16.4 Chapter 1 Page 16.1 Chapter Content 16.1 Wapiti Gravel Suppliers is committed
IMPLEMENTING ISO 14001:2004. www.aecos.co.uk
IMPLEMENTING ISO 14001:2004 www.aecos.co.uk What is an Environmental Management System? A systematic framework to manage the immediate and long term environmental impacts of an organisation s products,
University of Leicester Sports and Recreation Service. Statement on Safety in University Sports Facilities
University of Leicester Sports and Recreation Service Statement on Safety in University Sports Facilities Introduction The Sport and Recreation Service is an independent service within the University.
Getting the occupational safety basics organised
Getting the occupational safety basics organised 10 important measures Introduction Occupational health and safety are the foundation of wellbeing at work. The employer is responsible for providing safe
Health and Safety in the Engineering Workplace
Unit 1: Health and Safety in the Engineering Workplace Unit code: QCF Level 3: Credit value: 10 Guided learning hours: 60 Aim and purpose T/600/0249 BTEC National This unit will give learners an understanding
CONFINED SPACE PROCEDURE
Document uncontrolled when printed Procedure ID no 0460/05 CONFINED SPACE PROCEDURE This procedure is applicable to: All Department of Education and Children's Services employees. DOCUMENT CONTROL Managed
tips How smallchangescan saveyou big, &
warehousesafety tips How smallchangescan saveyou big preventaccidentsreduceinjuries, & increaseproductivity.. Table of Contents Welcome Statement...4 Safety Policy Statement...5 Guiding Principles...6
1. GENERAL STATEMENT OF COMPANY HEALTH, SAFETY AND ENVIRONMENTAL POLICY
1. GENERAL STATEMENT OF COMPANY HEALTH, SAFETY AND ENVIRONMENTAL POLICY Dumfries Timber Co. Ltd. is committed to comply with our legal duties in order to provide a safe and healthy working environment
Asbestos Safety Management Standard Issue 8 October 2008. www.walsall.org.uk/healthandsafety
www.walsall.org.uk/healthandsafety Asbestos Safety Management Standard Issue 8 October 2008 Page 1 of 7 / WMBC/SMS Asb/008/01 UNCONTROLLED WHEN PRINTED Please contact us if you have any difficulty reading
HEALTH AND SAFETY POLICY LEWIS & RABY ENGINEERS LTD
HEALTH AND SAFETY POLICY LEWIS & RABY ENGINEERS LTD Birchall Road Knowsley Industrial Estate Liverpool L33 7TG TABLE OF CONTENTS STATEMENT OF SAFETY POLICY... 3 STATEMENT OF INTENT... 4 HEALTH & SAFETY
St Peter s College ELECTRICAL SAFETY. B. University Safety Office Policy Statement S4/10, Working safely with Electricity.
St Peter s College ELECTRICAL SAFETY References: A. Peninsula Business Services Guidance Note 4-1, Electrical Safety. B. University Safety Office Policy Statement S4/10, Working safely with Electricity.
HEALTH AND SAFETY MANAGEMENT
Health & Safety Services Unit name goes here Safety Code of Practice 2 Part A 5 th Edition, November 2015 Unit name goes here HEALTH AND SAFETY MANAGEMENT Organisation and Responsibilities University of
The Management of Asbestos containing Materials
The Management of Asbestos containing Materials Status Owner Approval by University Court Draft Head of Estates and Building 1 Purpose... 1 2 Scope... 3 3 Principles... 4 4 Procedure... 5 5 Accountabilities...
University of St. Andrews. Guidance on Workplace Health and Safety Inspections
University of St. Andrews Guidance on Workplace Health and Safety Inspections Environmental, Health and Safety Services 2005 Contents Page Number 1. Introduction 4 2. Inspection Procedure 4 3. Inspection
HEALTH & SAFETY POLICY
HEALTH & SAFETY POLICY Last Updated: November 2014 Finance & General Purposes Committee: November 2014 Corporation Approval: December 2014 Review Date: November 2016 HEALTH AND SAFETY POLICY 1. Policy
ANNEX 2 Emergency / Pollution Incident Response Plan
ANNEX 2 Emergency / Pollution Incident Response Plan Volume 5 of 5 Appendix 21.1 Annex 2 EPIRP Page 1 of 9 1 WIND FARM CONSTRUCTION ENVIRONMENTAL EMERGENCY / POLLUTION RESPONSE PLAN... 3 1.1 Policy...
AURV471482A Plan and manage compliance with environmental regulations in the body repair industry
AURV471482A Plan and manage compliance with environmental regulations in the body repair industry Release: 1 AURV471482A Plan and manage compliance with environmental regulations in the body repair industry
Excavation & Trenching Procedure
Excavation & Trenching 1. Overview The will ensure, as far as is reasonably practicable, that the conduct of work relating to excavation and trenching will not be harmful to the health and safety of employees
ENVIRONMENTAL POLICY STATEMENT
ENVIRONMENTAL POLICY STATEMENT COMPANY NAME ADDRESS COMPANY ACTIVITIES TRACKYOU LTD BLACKWOOD BUSINESS PARK, ASH ROAD SOUTH, WREXHAM, LL13 9UG Telematics Provider of Vehicle Tracking Units to Local Authorities
Traffic Management Plan - Depot Procedure
Traffic Management Plan - Depot Procedure Date: 1/8/13 Version: TMPDPGWT001 Status: Approved 1. Purpose This procedure outlines the traffic management plan which must be followed for the Depots. 2. Scope
WORKPLACE REHABILITATION & RETURN TO WORK QUEENSLAND
WORKPLACE REHABILITATION & RETURN TO WORK QUEENSLAND POLICY STATEMENT Kelly Services is committed to the prevention of work-related injuries and illnesses by providing a safe working environment through
Contractor Environment, Health and Safety Management Plan
EHSMS10 Contractor and Supplier EHS Management Contractor Environment, Health and Safety Management Plan Purpose Guidelines Record Keeping This template provides an example to Santos Contractors of the
ASTRAZENECA GLOBAL POLICY SAFETY, HEALTH AND ENVIRONMENT (SHE)
ASTRAZENECA GLOBAL POLICY SAFETY, HEALTH AND ENVIRONMENT (SHE) THIS POLICY SETS OUT HOW WE WILL MEET OUR COMMITMENT TO OPERATING OUR BUSINESS IN A WAY THAT PROTECTS PERSONAL HEALTH, WELLBEING AND SAFETY
810. Health and Safety Policy
Adopted: May 14, 2012 Model Policy 810 Revised: June 22, 2015 Orig. 2012. 810. Health and Safety Policy I. PURPOSE The Windom School District strives to provide a safe, healthy work and educational environment
Benchmark OHS Consulting Pty Ltd Self Assessment WHS Audit Tool
Benchmark OHS Consulting Pty Ltd Self Assessment WHS Audit Tool This WHS Auditing System Tool is to be used as a self-assessment of YOUR COMPANY compliance with AS 4801 and the Work Health and Safety Act
Level 2 Certificate in Warehousing and Storage Skills (QCF)
Level 2 Certificate in Warehousing and Storage Skills (QCF) Qualification Handbook www.cityandguilds.com September 2010 Version 1.1 Level 2 Certificate 1016-02 QAN 501/1082/2 About City & Guilds City &
The Royal Environmental Health Institute of Scotland
The Royal Environmental Health Institute of Scotland Introduction to Health and Safety Course Syllabus Minimum teaching time 3 hours The Royal Environmental Health Institute of Scotland is a registered
Corporate Risk Management Policy
Corporate Risk Management Policy Managing the Risk and Realising the Opportunity www.reading.gov.uk Risk Management is Good Management Page 1 of 19 Contents 1. Our Risk Management Vision 3 2. Introduction
OSHA Training Guidelines (An Unofficial Summary)
OSHA Training Guidelines (An Unofficial Summary) Many standards promulgated by the Occupational Safety and Health Administration (OSHA) explicitly require the employer to train employees in the safety
Health, Security, Safety and Environment (HSE)
Health, Security, Safety and Environment (HSE) Content: 1 Objective 2 Application and Scope 21 Application of HSE Directive with underlying documents 22 Scope of HSE Management system 3 Framework for our
JOB DESCRIPTION. Team Leader Fleet Engineering. Environment & Sustainable Communities / Highways. Transport Operations / Vehicle Fleet & Depot
JOB DESCRIPTION JOB TITLE: DIRECTORATE: SECTION: GRADE: Team Leader Fleet Engineering Environment & Sustainable Communities / Highways Transport Operations / Vehicle Fleet & Depot BBCU11 DATE PREPARED:
Release: 1. AURTTM001 Operate and monitor computer numerical control machines
Release: 1 AURTTM001 Operate and monitor computer numerical control machines AURTTM001 Operate and monitor computer numerical control machines Modification History Release Release 1 Comment New unit of