Open-Frame Rack Cable Managers. CABLETEK Horizontal Cable Manager. Networking: Cable/Power Management. Industry Standards EIA 310-D

Transcription

1 Spec-001 HPH FX (63) Networking Cable/Power Management CABLETEK Horizontal Cable Manager Industry Standards EIA 310-D Application This cable manager features heavy-duty endposts, arrowhead fingers and tool-less mounting to easily route Cat 5e, 6 and 6A cable horizontally in standard 1-in. cabinets or on - or 4-post open frame racks. Features Snap-in mounting provision holds cable manager in place while mounting screws are installed Robust arrowhead fingers are shaped to funnel cables into base and are made of black composite material Robust rounded end posts support cable as it enters and leaves cable manager and maintains proper cable bend radius Deep cable compartments allow maximum cable density Rounded edges throughout protect cable jackets from damage Pass-through holes on double-sided models protect cable while facilitating routing between front and back sides Single- and double-sided units provide high cable capacity, including 5e, 6 and 6A cables 1 RU and RU heights allow greater flexibility in optimizing rack capacity Removable hinged cover opens top or bottom, snaps closed for assured cable protection and professional appearance Double-sided model has covers on both front and back Covers stay open during installation and maintenance procedures Horizontal and vertical cable managers designed as a system for streamlined appearance and improved functionality Combination head 10-3 and 1-4 screws included for mounting Specifications Made of UL listed black composite material Finish Low gloss, matches look of RAL 005 textured paint PH (63) FX (63) 4-5 hoffmanonline.com 011 Pentair Technical Products 1

2 Standard Product CABLETEK Horizontal Cable Managers; 60% Cable Manager Fill Rate Catalog Number DCHS1 Description Single sided Rack Units 1 DCHS Single sided DCHD A Front Area (in.) 4. (0.-in. dia.) 66 (0.5-in. dia.) 5 35 Back Area (in.) (0.-in. dia.) (0.5-in. dia.) Arrowhead Cable Capacity; 60% Fill Rate Location Front Back Area (in.) 5.5. (0.-in. dia.) (0.5-in. dia.) PH (63) FX (63) 4-5 hoffmanonline.com Pentair Technical Products

3 CABLETEK Vertical Cable Manager Industry Standards EIA 310-D Application Available in single- and double-sided models, this vertical cable manager mounts on the sides of or between - and 4-post open frame racks. The front side of the manager provides support, management and high capacity for patch cords, while the back supports Cat 5e, 6, 6A and fiber optic cables. Features Easily removable one-piece front cover with access from right or left as needed opens 10º to allow full access to cables Self-aligning bolt locations minimize lifting and speed installation Self-captivating fasteners; bolt doesn t turn while tightening nut Generous finger depth allows for maximum cable density and allows smooth transitions from vertical to horizontal positions Unobstructed cable access to rack equipmentno keep-out areas Rounded edges on composite material and grommets protect cable jackets from damage Robust arrowhead fingers are shaped to funnel cables into base and are made of black composite material Cable tiedown points provided on back Pass-through holes protect cable while facilitating routing between front and back Single central door latch allows quick and easy access to cables Double-sided models include five posts and gates that can be positioned as needed to support and contain cables. Additional posts and gates available as accessories. Posts snap into prepunched holes in the back of the cable manager Gates snap onto posts, open from left or right as needed and swing 0º for cable access. Posts can be used alone as slack spools to control long patch cords. Horizontal and vertical cable managers designed as a system for streamlined appearance and improved functionality Specifications Front door and cable channel made of multi-formed lightweight aluminum Hinge points and supporting fingers made of high-strength composite material Finish Aluminum components are coated with RAL 005 black low-gloss lightly-textured polyester powder paint. Composite parts have a low-gloss finish that matches look of RAL 005 textured paint. Bulletin: DOFRY PH (63) FX (63) 4-5 hoffmanonline.com 011 Pentair Technical Products 3

4 Standard Product Vertical Cable Manager Catalog Number DV6S DV10S DV1S DV6D DV10D DV1D DV6S DV10S DV1S DV6D DV10D DV1D DV6S DV10S DV1S DV6D DV10D DV1D Fits Rack Height (ft.) Description 5 U 5 U 5 U 5 U 5 U 5 U A (in.) A (mm) B (in.) B (mm) X (in.) X (mm) B dimension represents the mounting space between ganged open-frame racks. B X mm mm A mm A B-.00 Top View (End Caps Removed) 5134 Cable Manager Cable Capacity; 60% Fill Rate Cable Manager Width (inch) Front Area (in.) (0.-in. dia.) 1 1 (0.5-in. dia.) Back Area (in.) (0.-in. dia.) (0.5-in. dia.) Arrowhead Cable Capacity, 60% Fill Rate Area (in.) (0.-in. dia.) 5 (0.5-in. dia.) 66 PH (63) FX (63) 4-5 hoffmanonline.com Pentair Technical Products

5 CABLETEK Post and Gate Kits Catalog Number Description B (in.) B (mm) Pkg. Qty. DGP3 Post and Gates sets DGP6 Post and Gates sets DGP10 Post and Gates sets DGP1 Post and Gates sets Post and Gate Kits snap together quickly without tools. Each set consists of two posts and one gate. Posts snap into prepunched holes on the backs of all CABLETEK Vertical Cable Managers and are easily repositionable without tools. Gates swivel open 0 degrees left or right to allow convenient cable access. When closed, post and gates contain, support and secure large volumes of cables and cable bundles. Molded from black composite material with large radius, these Post and Gates smoothly transition cables from vertical to horizontal positions. Order additional Posts and Gate Kits to add to single- and double-sided cable managers. Single posts can be used alone as slack spools on the front side of the cable manager. Bulletin: DOFRY Waterfall Top For routing cable across the top of an open-frame rack. Provides horizontal-to-vertical transition bend radius for compliant installation of Category 5, 6, 6A and fiber optic cable. Makes a complete cable management system when used with vertical and horizontal cable managers. Mounts on - and 4-post open-frame racks. Material is steel with RAL 005 black polyester powder paint finish. Bulletin: DOFRY Catalog Number Description Fits Open Frame Rack EWFT Waterfall Top 1 in. D-Ring Assembly Catalog Number Description B ECM1DR1U 1-in. D-Ring Assembly ECM1DRU 1-in. D-Ring Assembly. 56 L W Mounts horizontally on 1-in. racks. Allows grouping vertical cable runs. D-Rings rotate on bracket for easy cable positioning; snap open for easy access for cable updates, yet latch securely. Back plate made of steel with RAL 005 black polyester powder paint finish; D-Rings are black plastic. Mounting hardware included. PH (63) FX (63) 4-5 hoffmanonline.com 011 Pentair Technical Products 5

6 Tie-Down Panel Catalog Number Description W ECM1TP1U 1-in. Tie-Down Panel ECM1TPU 1-in. Tie-Down Panel Tie-Down Panels mount horizontally on 1-in. racks. Steel panels with RAL 005 black polyester powder paint finish have slots for VELCRO cable wraps. Each panel includes 10 black -in. (03-mm) VELCRO cable wraps. Mounting hardware included. VELCRO is a trademark of Velcro Industries B.V Tie-Down Rack Catalog Number Description ECM1TDU 1-in. Tie Down Rack 0 This zero-rack-unit Tie-Down Rack mounts horizontally on 1- in. racks. It takes up minimum space yet effectively controls and separates cable runs. Made of steel with RAL 005 black polyester powder paint finish. Includes slots for cable wraps. Each rack includes 10 black -in. (03-mm) VELCRO cable wraps. Mounting hardware included. VELCRO is a trademark of VELCRO Industries B.V. Wire Form Cable Manager Catalog Number Description Use With EWVC1H 1-in. Wire Form Cable Manager 1-in. racks 0 This cable manager takes up minimum space, but provides excellent cable sorting capability. Designed to mount on top of patch panels, this zero-rack-unit cable manager provides support and control of cables. Made of plated steel. Mounting hardware included. 6 PH (63) FX (63) 4-5 hoffmanonline.com 011 Pentair Technical Products

7 Cable Trough Mounts horizontally on 1-in. or 3-in. rack angles to support cables and power cords. Made of steel with RAL 005 black polyester powder paint finish. Bulletin: DOFRY Catalog Number Description L ECT1 1-in. Cable Trough ECT3 3-in. Cable Trough Cable Manager Mounts horizontally. For routing and bundling cable on 1-in. or 3- in. racks. Material is steel with RAL 005 black polyester powder paint finish. Horizontal-Vertical Cable Manager shown., DOFRY Catalog Number Description L ECK1H 1-in. Horizontal Cable Manager ECK1HV 1-in. Horizontal-Vertical Cable Manager ECK3HV 3-in. Horizontal-Vertical Cable Manager Horizontal Cable Management Cover Provides a finished appearance to a 1-in. or 3-in. open-frame rack cable management system. Models snap onto ECK1H, ECK1HV and ECK3HV Cable Managers. Material is steel with RAL 005 black polyester powder paint finish. Catalog Number Description Fits Horizontal Cable Manager L ECKCVR1 1-in. Cable Manager Cover ECK1H, ECK1HV ECKCVR3 3-in. Cable Manager Cover ECK3HV PH (63) FX (63) 4-5 hoffmanonline.com 011 Pentair Technical Products

8 Horizontal Cable Manager Bar Supports cables between vertical and horizontal cable managers. Designed for use with VELCRO cable ties. Angled tie-off surfaces allow cable to follow natural flow and maintain proper bend radius. Can be installed behind patch panels to support large permanent link cable bundles. Can also be installed on top of patch panels as a zero- RU manager to separate and control patch cables. Made of steel with a black finish. Secures standard cables, including CAT 5e, 6 and 6A cables. Meets EIA 310-D standard. Includes mounting fasteners. VELCRO is a trademark of VELCRO Industries B.V. Catalog Number Description DCHB1 Horizontal Cable Manager Bar 1 PH (63) FX (63) 4-5 hoffmanonline.com 011 Pentair Technical Products