PRODUCT SPECIFICATIONS SLIDING GLAZED DOORS ORGANIZED BY MATERIAL

Size: px
Start display at page:

Download "PRODUCT SPECIFICATIONS SLIDING GLAZED DOORS ORGANIZED BY MATERIAL"

Transcription

1 Weiland Sliding Doors & Windows, Inc. manufactures aluminum, aluminum/wood, and wood sliding doors, heavy duty (Beefy) bifold doors, bifold doors, swinging doors and windows. Weiland Sliding Doors and Windows, Inc. has evolved from a specialty woodworking business to a manufacturer of high precision European doors and windows. With over two decades of experience behind our designs, the company has positioned itself as the forerunner in European door and window products, modified for U.S. applications. In the early 90 s, an aluminum and aluminum wood door was introduced using European hardware. Our manufacturing plant has been located in the San Diego area since SLIDING GLAZED DOORS ORGANIZED BY MATERIAL REFERENCES... 2 SUBMITTALS... 2 QUALITY ASSURANCE... 2 DELIVERY, STORAGE, AND HANDLING... 3 PROJECT CONDITIONS... 3 TERMS & CONDITIONS... 3 MANUFACTURER... 3 MATERIALS... 3 FABRICATION... 3 WOOD DOORS and HARDWARE... 4 WOOD LIFTSLIDE DOOR SYSTEM... 4 WOOD HEAVY DUTY (BEEFY) BIFOLD DOOR SYSTEM... 5 WOOD BIFOLD DOOR SYSTEM... 6 WOOD FRENCH DOOR...8 ALUMINUM DOORS... 9 ALUMINUM LIFTSLIDE DOOR SYSTEM... 9 ALUMINUM HEAVY DUTY (BEEFY) BIFOLD DOOR SYSTEM ALUMINUM BIFOLD DOOR SYSTEM ALUMINUM WOOD DOORS ALUMINUM WOOD LIFTSLIDE DOOR SYSTEM ALUMINUM WOOD HEAVY DUTY (BEEFY) BIFOLD DOOR SYSTEM ALUMINUM WOOD BIFOLD DOOR SYSTEM EXECUTION EXAMINATION PREPARATION INSTALLATION PROTECTION Page 1 of

2 REFERENCES A. AAMA - American Architectural Manufactures Association: a. AAMA High Performance Organic Coatings on Architectural Extrusions and Panels. b. AAMA/WDMA/SCA 101/I.S.2/A Standard/Specification for Windows, Doors and Unit Skylights. B. ASTM - American Society for Testing and Materials: SUBMITTALS a. ASTM E 2068 Standard Test Method for Determination of Operating Force of Sliding Windows and Doors. b. ASTM E 283 Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen. c. ASTM E 547 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference. d. ASTM E 331 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference. e. ASTM E330 Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference. f. ASTM F 588 Standard Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact. g. High Velocity Hurricane Zone, Protocols TAS , TAS , and TAS for series/model Aluminum Wood Liftslide (AWLS) doors (wood clad aluminum lift and slide doors) +/- 40. a. ASTM W /ASTM E Wind Zone 4, Missile Level D, Cycle Pressure +/- 50. A. Shop Drawings: Submit under provisions of Section B. Product Data: Submit manufacturer's catalog data on each product to be used. Include glazing system and two color samples representing specified colors and finishes. C. Shop Drawings: Indicate location, size, and hand of each door; elevation of each kind of door; construction details, including those for stiles, rails, panels, moldings and other pertinent construction; provide configuration of door panels. QUALITY ASSURANCE A. Installer Qualifications: Installer acceptable to door manufacturer for installation of units required for this Project. B. Manufacturer Qualifications: Single manufacturer with a minimum of fifteen (15) years experience shall provide all primary products specified in this section. Page 2 of

3 C. Performance: Doors and windows are assembled in-house and operated for quality control before units are shipped to jobsite. DELIVERY, STORAGE, AND HANDLING A. Each door shall be marked on packing material with the panel and door unit number used on Shop Drawings. B. Store products in manufacturer's packaging in an upright position off the ground in a clean, dry area until ready for installation. C. Protect wood surfaces by priming or sealing as recommended by manufacturer. PROJECT CONDITIONS A. Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits. B. Field Measurements: Verify fenestration openings by field measurements before fabrication and indicate measurements on Shop Drawings. TERMS & CONDITIONS A. Manufacturer s Warranty: Manufacturer s standard warranty, terms & conditions as published on the company website. MANUFACTURER Weiland Sliding Doors & Windows, Inc., 2601 Industry St., Oceanside, CA 92054; Phone: (760) ; Fax: (760) ; Web: MATERIALS 1. Aluminum: Meets requirements of ASTM G34. A. Alloy and Temper: 6063-T5. B. Ultimate Strength: 185 Mpa. 2. Glazing: Comply with requirements of Section and with AAMA/WDMA 101/I.S.2/NAFS. A. Safety Glass: Provide laminated and tempered products complying with testing requirements in 16 CFR 1201, for Category II materials. B. Insulated glass. C. Impact glass, monolithic and dual D. Low E Insulated glass. 1) Color: Clear. 2) Color: Bronze. 3) Color: Gray. 4) Color:. FABRICATION 1. Fabricate panels, jambs and tracks in sizes indicated, re-glazable. Page 3 of

4 2. Weather Stripping: Provide full-perimeter weather stripping for each operable and or stationary panel, unless otherwise indicated. 3. Factory machine doors for openings and for hardware that is not surface applied. WOOD DOORS and HARDWARE WOOD LIFTSLIDE DOOR SYSTEM 1. Product: Liftslide Doors as manufactured by Weiland Sliding Doors & Windows, Inc. Panel height 12 feet (3658mm), panel width 10 feet (3048mm) and system length unlimited. 2. Operation: When activated, geared hardware system shall lift panels off track. Panels shall glide on wheels set on track. Doors shall be lowered when closed, creating weather seal. 3. System Configuration: Provide the following system configuration. A. Stacked at jamb, center meeting or single sided. B. Pocketed into the wall, center meeting or single sided. C. Meeting at corners with no fixed posts (stacked or pocketed). D. Stacked to interior or exterior of a wall, center meeting or single sided. 4. Size: Refer to Door Schedule on drawings for sizes. All door sizes are custom. Glass warranty limited to 60 sf. 5. Track: Sloped track with a raised threshold (Used when channeling into floor is not desired limited to 2 panels or 4 panels if meeting). 6. Track: Corrosion resistant aluminum extrusion, 6005 aluminum alloy, anodized, for marine environments; A. Standard flush track with transverse drain extends 3/16 inch (4.8 mm) above finished floor. B. Drainage track system with transverse drains (for in-floor drainage). C. Shallow track with transverse drain (Used when floor channeling needs to be minimized). 7. Head Track: Head track size depends on the number of panels. Please reference drawings. 8. Frame and Sash: A. Sash, Frame: LVL core with 3/8 wood skin. B. Wood Species: 1) Honduras Mahogany 2) Douglas Fir 3) Teak 4) African Mahogany C. Standard Panel Frame Thickness: 2-5/8 inches (66.7 mm). For panel sizes between tall, top and side rail thickness increases to 3-3/16. D. Top rail and side rail standard face width 3-5/8 inch and 4-3/16 at panel overlap E. Bottom rail standard size 7-1/4 inch. Other sizes available. For larger panels, dimensions may increase. 9. Glass Thickness: 1/2 inch (12.7 mm) Laminated up to 1-1/2 inch (38 mm) Insulated Glass (in the case of 1-1/4 inch IG, the glass is 1/4 inch (6.35 mm) both sides of a 3/4 inch (19 mm) spacer). 10. Hardware: Multi point locking system. Provide the following: A. Handle, standard permanent or removable, finish: 1) Dark bronze 2) White Page 4 of

5 3) Mill finish. B. Handle, Atlanta style, permanent or removable, finish: 1) Rustic Umber 2) Antique Brass 3) Polished Brass Resista 4) Satin Nickel Resista 5) Oil Rubbed Resista C. Handles, permanent, with cylinder 1) Full cylinder, keyed exterior, thumb turn interior interior/exterior handles 2) Full cylinder, interior/exterior keyed, interior/exterior handles 3) Half cylinder, interior thumb turn, interior handle 4) Half cylinder, interior key, interior handle 11. Screens (Optional) A. Screens on jamb-jamb door systems are normally located on the exterior, and optionally can be on the interior side. Screen track for exterior screens is always drainage track. Pocketing door system screens are always located on the interior. Meeting units must have a minimum of two screens. Number of screens possible depends on the system configuration. Screen frame default is wood. WOOD HEAVY DUTY (BEEFY) BIFOLD DOOR SYSTEM 1. Product: Beefy Bifold Door as manufactured by Weiland Sliding Doors & Windows, Inc. Specialized hardware allows panel sizes up to 12 feet (3658 mm) tall. Center pivot hardware accommodates maximum width of 60 inches (1524mm) and system width up to 50 feet (15 meters). 2. Operation: Moving glass wall system, center hung panels, except for man-doors (French doors), panels fold half in and half out of opening, allowing panels to accordion and stack toward the handle. 3. System Configuration: Provide the following system configuration. A. Opening at center B. Opening at jamb C. Corner unit meeting at corners with no fixed posts D. Man-door at door jamb for entry/exit. Man-door operates without operating bifold doors. 4. Size: Refer to Door Schedule on drawings for sizes. All door sizes are custom. Glass warranty limited to 60 sf. 5. Floor Track: A. Standard stainless steel track with drains 1) Height: Bottom track extends 3/8 inch (9.5 mm) above finished floor. 2) In floor drainage: Provide drainage track system. 3) Material: 304 stainless steel. B. Sloped threshold with standard drain track 1) Height: Bottom track extends 1-1/8 inch (28.5 mm) above exterior floor. 2) Material: 304 stainless steel, wood, aluminum. 6. Head Track: A. Panels shall be center hung from a 5-7/8 inch aluminum (149.2 mm) wide head track. 7. Frame and Sash: A. Sash, Frame: LVL core with 3/8 wood skin. B. Wood Species: Page 5 of

6 1) Honduras Mahogany 2) Douglas Fir 3) Teak 4) African Mahogany C. Panel frame thickness: 2-5/8 inches (66.7 mm). Panels in height increase to 3-3/16 thickness. Reinforcement contingent upon weight or square footage of panel. D. Top rail and side rail: 3-5/8 inch (92 mm). Dimensions may increase for larger panels. E. Bottom rail: 7-1/4 inches (184 mm). Dimensions may increase for larger panels. 8. Glass Thickness: 1/2 inch (12.7 mm) laminated to 1-1/4 inch (31.8 mm) Insulated glass (in the case of 1-1/4 inch IG, the glass is 1/4 inch (6.35 mm) both sides of a 3/4 inch (19 mm) spacer). 9. Hardware multi point locking system. Provide the following: A. Keyed cylinders. B. Center pivot hardware. C. Handle, standard, finish: 1) Mill finish 2) White 3) Dark bronze D. Handle, Atlanta style, finish: 1) Rustic Umber 2) Antique Brass 3) Polished Brass Resista 4) Satin Nickel Resista 5) Oil Rubbed Resista E. Shoot bolt finish: 1) Oil rubbed bronze 2) Stainless steel 3) Solid brass F. Hinge finish: 1) Mill finish, painted to match Kynar finish 2) White 3) Black WOOD BIFOLD DOOR SYSTEM 1. Product: Bifold doors as manufactured by Weiland Sliding Doors & Windows, Inc. Panel height up to 9 feet (2743 mm) with width limitations, panel width up to 48 inches (1219 mm) with height limitations and system length up to 10 panels. 2. Operation: Moving glass wall system, pivoting at the panel hinge, allowing panels to accordion and stack away from the handle. Panels can be infold (fold to interior) or outfold (fold to exterior). 3. System Configuration: Provide the following system: A. Doors fold to interior (infold). B. Doors fold to exterior (outfold). C. Opening at the center. D. Opening at the jamb. E. Man-door for entry/exit. Man-door (French door) operates without operating the folding door panels. Man-door may be hinged on the jamb or the panel, but man-doors can only be hinged from the panel when the door configuration has an odd number of panels. F. Free swinging panels 4. Size: Refer to door schedule on drawings for sizes (Consult with manufacturer for doors over 9 feet (2743 mm) in height or for large numbers of panels. All door sizes are custom. Standard Page 6 of

7 bifold hardware allows panel sizes up to 9 feet (2743 mm) tall with width limitations, maximum panel width of 48 inches (1219 mm) with height limitations, and door systems up to 48 feet (15 meters) wide. 5. Bottom Track: A. Standard stainless steel track with drains 1) Height: Bottom track extends 3/8 inch (9.5 mm) above finished floor 2) In floor drainage: Provide drainage track system 3) Material: 304 stainless steel B. Slope threshold with standard stainless steel track with drains (Used when channeling into floor is not desired.) 1) Height: Bottom track extends 2 inches (50.8 mm) above exterior floor 2) Material: 304 stainless steel, wood, aluminum C. U-channel track 1) Height: flush with finished floor 2) For interior applications only, no drains are included. 6. Head Track: A. Panels shall be edge (hinge) hung from a 7 inch (177.8 mm) wide head. 7. Side Jamb: 7 inches (177.8 mm) wide. 8. Frame and Sash: A. Sash, Frame: LVL core with 3/8 wood skin. B. Wood Species: 1) Honduras Mahogany 2) Douglas Fir 3) Teak 4) African Mahogany C. Panel frame thickness: 2-1/4 inches (44.5 mm). D. Bottom frame 7 inch (177.8 mm) wide. E. Side and top frame 4-5/8 inch (117.5 mm) wide. 9. Glass Thickness: 7/8 inch (22 mm) insulated glass (3/16 inch (4.8 mm) glass both sides of 1/2 inch (12.7 mm) spacer). 10. Hardware: Provide the following: A. Hinges: hinge system shall allow operable doors to be placed within the system to act as man-doors (French doors). B. Multi point locking system. C. Hardware finishes; 1) Stainless steel 2) PVD brass 3) PVD bronze 4) White powder coat D. Handle, keyed with cylinder, finish: 1) Black 2) Oil-rubbed bronze 3) Brushed chrome Page 7 of

8 WOOD INSWING/OUTSWING FRENCH DOOR SYSTEM 1. Product: French doors as manufactured by Weiland Sliding Doors & Windows, Inc. Panel height up to 12 feet (3658 mm) with width limitations, panel width up to 48 inches (1219 mm) with height limitations. 2. Operation: 2-5/8 panels inswing/outswing French door 3. Size: Refer to door schedule on drawings for sizes (Consult with manufacturer for doors over 8 feet (2743 mm) or for widths over 48 inches (1219 mm)). All door sizes are custom. 4. Bottom Track: A. Door Frame: B. 6 jamb depth C. Special depths available upon request. D. 1-¼ face width 5. Panel Description: A. Stiles, top and bottom rails constructed of LVL core with 3/8 wood skin. B. Wood Species kiln dried to a moisture content no greater than twelve (12) percent at time of fabrication: 1) Honduras Mahogany 2) Douglas Fir 3) Teak 4) African Mahogany C. Panel thickness: 2-5/8 inches (67 mm). D. Bottom rail 7-1/4 inch (184 mm) wide. E. Stile and top rail 3-5/8 inch (92 mm) wide. F. Panels are mortise and tenon construction, with a cross linked PVA waterproof glue. G. Removable interior wood glazing stops. 6. Glazing: A. Glass thickness OA: 1/2 to 1-1/4 options B. Glass type: custom, specified by client C. Glazing seal: wood interior glazing stops fastened with 18 gauge nails, silicone wet set. 7. Hardware: Provide the following: A. Hinges: 1) European adjustable knuckle, black or white 2) Butt hinge B. Multi point locking system. C. Hardware finishes; 1) Rustic umber 2) Oil rubbed bronze 3) PVD brass 4) Matte black 5) Brush chrome 6) To match, powder coat Page 8 of

9 D. Handle, keyed with cylinder, finish: 1) Black 2) Oil-rubbed bronze 3) Brushed chrome ALUMINUM DOORS ALUMINUM LIFTSLIDE DOOR SYSTEM 1. Product: Liftslide doors as manufactured by Weiland Sliding Doors & Windows, Inc. Panel height up to 16 feet (4877 mm), panel width up to 14 feet (4267mm) and system length unlimited. 2. Operation: When activated, geared hardware system shall lift panels off track. Panels shall glide on wheels set on track. Doors shall be lowered when closed, creating weather seal. 3. System Configuration: Provide the following system configuration. A. Stacked at jamb, center meeting or single sided. B. Pocketed, center meeting or single sided. C. Meeting at corners with no posts (stacked or pocketed). D. Curved (or radius) (stacked or pocketed). E. Serpentine F. Stacked to interior or exterior of wall, center meeting or single sided. 4. Size: Refer to door schedule on drawings for sizes. All door sizes are custom. Glass warranty limited to 60 sf. 5. Track: Corrosion resistant aluminum extrusion, 6005 aluminum alloy, anodized, for marine environments; extends 3/16 inch (4.8 mm) above finished floor with transverse drain. A. Standard flush track with transverse drains. B. Drainage track system (for in floor drainage). C. Shallow track with drain (Used when floor channeling needs to be minimized). D. Sloped track with raised threshold (Used when channeling into floor is not desired and limited to two tracks.). 6. Head Track: A. Head track size depends on the number of panels. 7. Frame and Sash: A. Aluminum: 6063 T5 aluminum alloy. 1) Panel frame thickness: 3-3/16 inches (80.9 mm). 2) Sash Width: 3-1/2 inches (89 mm). 3) Aluminum finish: Kynar 70, meeting the performance criteria of AAMA specification and certified by the formulator as containing KYNAR 70 resin as manufactured by Elf Atochem North America, Inc. a. Color: As selected from manufacturer s standard colors b. Color: Custom color to match color sample provided. c. Color: Anodized 8. Glass Thickness: 1/2 inch (12.7 mm) Laminated to 1-1/2 inch (38 mm) Insulated Glass (in the case of 1-1/4 inch IG, the glass is 1/4 inch (6.35 mm) both sides of a 3/4 inch (19 mm) spacer). 9. Hardware: Multi point locking system. Provide the following: A. Handle, standard permanent or removable, finish: Page 9 of

10 1) Dark bronze 2) White 3) Mill finish. B. Handle, Atlanta style, finish: 1) Rustic Umber 2) Antique Brass 3) Polished Brass Resista 4) Satin Nickel Resista 5) Oil Rubbed Resista C. Handles, permanent, with cylinder 1) Full cylinder, keyed exterior, thumb turn interior interior/exterior handles 2) Full cylinder, interior/exterior keyed, interior/exterior handles 3) Half cylinder, interior thumb turn, interior handle 4) Half cylinder, interior key, interior handle 10. Screens (Optional). A. Screens on jamb-jamb door systems are normally located on the exterior, and optionally can be on the interior. Screen track for exterior screens is always drainage track. For pocketing door systems, screens are always located on the interior. Meeting units must have a minimum of two screens. Number of screens possible depends on the system configuration. Screen frame default is aluminum, ALS sash option available. ALUMINUM HEAVY DUTY (BEEFY) BIFOLD DOOR SYSTEM 1. Acceptable Product: Beefy Bifold door as manufactured by Weiland Sliding Doors & Windows, Inc. Specialized hardware allows panel sizes up to 13-1/2 feet (4115 mm) tall. Center pivot hardware accommodates maximum width of 60 inches (1524 mm) and system length up to 50 feet (15 meters), in stacks of five (5) panels or less. 2. Operation: Moving glass wall system, hinged at in the center of the panels (doors fold half in and half out of opening), allowing panels to accordion and stack toward the handle. 3. System Configuration: Provide the following system configuration. A. Opening at center. B. Opening at jamb. C. Corner unit meeting at corners with no posts. D. Man-door at doorjamb for entry/exit (Man-door operates without operating Bifold doors). 4. Size: Refer to door schedule on drawings for sizes. All door sizes are custom. Glass warranty limited to 60 sf. 5. Floor Track: A. Standard drain track 1) Height: Bottom track extends 3/8 inch (9.5 mm) above finished floor 2) In Floor Drainage: Provide drainage track system 3) Material: 304 stainless steel B. Slope threshold with standard drain track 1) Height: Bottom track extends 1-1/8 inch (25.4 mm) above exterior floor 2) Material: 304 stainless steel, Wood, Aluminum 6. Head Track: A. Panels shall be center hung from a 5-7/8 inch (149.2 mm) wide aluminum head track. Page 10 of

11 7. Frame and Sash: A. Aluminum: 6063 aluminum alloy. B. Panel Frame Thickness: 3-3/16 inches (80.9 mm). C. Sash Width: 3-1/2 inches (89 mm). D. Aluminum Finish: Kynar 70, meeting the performance criteria of AAMA specification and certified by the formulator as containing KYNAR 70 resin as manufactured by Elf Atochem North America, Inc. 1) Color: As selected from manufacturer s standard colors 2) Color: Custom color to match color sample provided. 3) Color: Anodized 8. Glass Thickness: 1/2 inch (12.7 mm) Laminated to 1-1/2 inch (38 mm) Insulated Glass (in the case of 1-1/4 inch IG, the glass is 1/4 inch (6.35 mm) both sides of a 3/4 inch (19 mm) spacer). 9. Hardware: Multi point locking system. Provide the following: A. Keyed cylinders. B. Center pivot hardware and roller assembly. C. Handle, standard, finish: 1) Mill finish 2) White 3) Dark bronze D. Handle, Atlanta style, finish: 1) Rustic Umber 2) Antique Brass 3) Polished Brass Resista 4) Satin Nickel Resista 5) Oil Rubbed Resista E. Shoot bolt finish: 1) Oil rubbed bronze 2) Stainless steel 3) Solid brass F. Hinge finish: 1) Mill finish, painted to match Kynar finish 2) White 3) Black ALUMINUM BIFOLD DOOR SYSTEM 1. Acceptable Product: Bifold doors as manufactured by Weiland Sliding Doors & Windows, Inc. 2. Operation: Moving glass wall system, pivoting at the panel hinge, allowing panels to accordion and stack away from the handle. Panels can be infold (fold to interior) or outfold (fold to exterior). 3. System Configuration: Provide the following system: A. Doors fold to interior (infold). B. Doors fold to exterior (outfold). A. Opening at the center. B. Opening at the jamb. C. Man-door for entry/exit. Man-door operates without operating bifold doors. A man-door may be hinged on the jamb or the panel, but man-doors can only be hinged from the panel where the panel configuration has an odd number of panels. 4. Size: Refer to door schedule on drawings for sizes. All door sizes are custom. Standard bifold hardware allows panel sizes up to 108 inches (2743 mm) tall, maximum panel width of 36 inches (914 mm), and door systems up to 48 feet (15 meters) wide. Page 11 of

12 5. Floor Track: A. Standard drain track 1) Height: Bottom track extends 3/8 inch (9.5 mm) above finished floor 2) In Floor Drainage: Provide drainage track system 3) Material: 304 stainless steel B. Slope threshold with standard drain track 1) Height: Bottom track extends 1-1/8 inch (25.4 mm) above exterior floor 2) Material: 304 stainless steel, wood, aluminum C. U-channel track 1) Height: Flush with finished floor 2) For interior application only (no drains included). 6. Head Track: Panels shall be edge (hinge) hung from a 2-5/8 inch (66.7 mm) wide head track. 7. Side Jamb: 2-3/4 inches (69.9 mm) wide and 1-11/16 (42.9 mm) inches thick. 8. Frame and Sash: A. Aluminum: 6063 aluminum alloy. 1) Panel frame thickness: 1-9/16 inches (39.7 mm). 2) Sash width: 2-1/16 inches (52.4 mm). 3) Aluminum finish: Kynar 70, meeting the performance criteria of AAMA specification and certified by the formulator as containing KYNAR 70 resin as manufactured by Elf Atochem North America, Inc. a. Color: As selected from manufacturer s standard colors b. Color: Custom color to match color sample provided. 9. Glass Thickness: 7/8 inch (22 mm) Insulated Glass (3/16 inch (4.8 mm) glass both sides of 1/2 inch (12.7 mm) spacer). 10. Hardware: Provide the following: A. Hinges: Concealed hinge system shall allow operable doors to be placed within the system to act as man-doors (French doors). B. Multi point locking system. C. Lever pull handle finish: 1) Brass 2) Black 3) White 4) Silver D. Lever pull handle with thumb turn, finish: 1) Brass 2) Black 3) White 4) Silver E. Handle, keyed cylinder, finish: 1) Brass 2) Black 3) White 4) Silver F. Handle finish: 1) Brass 2) Black 3) White 4) Silver Page 12 of

13 ALUMINUM WOOD DOORS ALUMINUM WOOD LIFTSLIDE DOOR SYSTEM 1. Acceptable Product: Liftslide doors as manufactured by Weiland Sliding Doors & Windows, Inc. Panels up to 16 feet tall (4877 mm) with reinforcement needed over 13-1/2 feet (4115 mm) tall, panels up to 14 feet (4267 mm) wide and system length unlimited. 2. Operation: When activated, geared hardware system shall lift panels off track. Panels shall glide on wheels set on track. Doors shall be lowered when closed, creating weather seal. 3. System Configuration: Provide the following system configuration. A. Stacked at jamb, center meeting or single sided. B. Pocketed center meeting or single sided. C. Meeting at corners with no posts (stacked or pocketed). D. Curved (or radius) (stacked or pocketed). E. Serpentine F. Stacked to interior or exterior of a wall, center meeting or single sided. 4. Size: Refer to door schedule on drawings for sizes. All door sizes are custom. Glass warranty limited to 60 sf. 5. Track: Corrosion resistant aluminum extrusion, 6005 aluminum alloy, anodized, for non-marine environments, 5083 aluminum alloy, anodized, for marine environments; extends 3/16 inch (4.8 mm) above finished floor with transverse drain. A. Standard flush track with transverse drain (with in-floor drainage). B. Drainage track system (with in-floor drainage). C. Shallow track with drain (Used when floor channeling needs to be minimized). D. Sloped track with raised threshold (Used when channeling into floor is not desired). Limited to two tracks. 6. Head Track: Head track size depends on the number of panels. 7. Frame and Sash: A. Aluminum with wood cladding: 6063 aluminum alloy with wood species indicated. B. Panel frame thickness: 3-3/16 inches (80.9 mm), total thickness (2 11/16 inches (68.2 mm) of aluminum and 1/2 inch (12.7 mm) wood cladding). C. Sash Width: 3-1/2 inches (89 mm). D. Separator Clip: PVC clip separates aluminum and wood. Clip shall provide sliding joint that allows materials to expand and contract independently and serves as a thermal insulator. E. Wood Species: 1) Alder (clear or knotty) 2) Mahogany 3) Cherry 4) Douglas Fir 5) Cedar Page 13 of

14 6) Walnut 7) Other:. 8) As indicated on Drawings. F. Aluminum Finish: Kynar 70, meeting the performance criteria of AAMA specification and certified by the formulator as containing KYNAR 70 resin as manufactured by Elf Atochem North America, Inc. 1) Color: As selected from manufacturer s standard colors 2) Color: Custom color to match color sample provided. 3) Color: Anodized 8. Glass Thickness: 1/2 inch (12.7 mm) Laminated to 1-1/4 inch (31.8 mm) Insulated glass (in the case of 1-1/4 inch IG, the glass is 1/4 inch (6.35 mm) both sides of a 3/4 inch (19 mm) spacer). 11. Hardware: Multi point locking system. Provide the following: A. Handle, standard permanent or removable, finish: 1) Dark bronze 2) White 3) Mill finish. B. Handle, Atlanta style, finish: 1) Rustic Umber 2) Antique Brass 3) Polished Brass Resista 4) Satin Nickel Resista 5) Oil Rubbed Resista C. Handles, permanent, with cylinder 1) Full cylinder, keyed exterior, thumb turn interior interior/exterior handles 2) Full cylinder, interior/exterior keyed, interior/exterior handles 3) Half cylinder, interior thumb turn, interior handle 4) Half cylinder, interior key, interior handle 9. Screens (Optional). A. Screens on jamb-jamb door systems are normally located on the exterior, and optionally can be on the interior. Screen track for exterior screens is always drainage track. For pocketing door systems, screens are always located on the interior. Meeting units must have a minimum of two screens. Number of screens possible depends on the system configuration. Screen frame default is aluminum. Wood screens available. ALUMINUM WOOD HEAVY DUTY (BEEFY) BIFOLD DOOR SYSTEM 1. Acceptable Product: Beefy Bifold door as manufactured by Weiland Sliding Doors & Windows, Inc. Specialized hardware allows panel sizes up to 13-1/2 feet (4115 mm) tall. Center pivot hardware accommodates maximum width of 60 inches (1524 mm) and system length up to 50 feet (15 meters), in stacks of five (5) panels or less 2. Operation: Moving glass wall system, hinged at in the center of the panels (doors fold half in and half out of opening), allowing panels to accordion and stack toward the handle. 3. System Configuration: Provide the following system configuration. A. Center pivot door system; doors fold half in and half out of opening. B. Stacked. C. Meeting at corners with no posts. D. Man-door at door jamb for entry/exit. Man-door operates without operating bifold doors. Page 14 of

15 4. Size: Refer to door schedule on drawings for sizes. All door sizes are custom. Specialized hardware allows panel sizes up to 13-1/2 feet (4115 mm) tall. Center pivot hardware accommodates maximum width of 60 inches (1524 mm). Glass warranty limited to 60 sf. 5. Track: Straight track. A. Standard drain track 1) Height: Bottom track extends 3/8 inch (9.5 mm) above finished floor 2) In floor drainage: Provide drainage track system 3) Material: 304 stainless steel B. Slope threshold with standard drainage track 1) Height: Bottom track extends 1-1/8 inch (28.5 mm) above exterior floor 2) Material: 304 stainless steel, Wood, Aluminum 6. Head Track: Panels shall be center hung from a 5-7/8 inch (149.2 mm) wide head track. 7. Frame and Sash: A. Aluminum with wood cladding: 6063 aluminum alloy with wood species indicated. B. Panel frame thickness: 3-3/16 inches (80.9 mm), total thickness (2 11/16 inches (68.2 mm) of aluminum and 1/2 inch (12.7 mm) thick wood cladding). C. Sash width: 3-1/2 inches (89 mm). D. Separator Clip: PVC clip separates aluminum and wood. Clip shall provide sliding joint that allows materials to expand and contract independently and acts as a thermal insulator. E. Wood Species: 1) Alder (clear or knotty) 2) Mahogany 3) Cherry 4) Douglas Fir 5) Cedar 6) Walnut 7) Other:. F. Aluminum Finish: Kynar 70, meeting the performance criteria of AAMA specification and certified by the formulator as containing KYNAR 70 resin as manufactured by Elf Atochem North America, Inc. 1) Color: As selected from manufacturer s standard colors 2) Color: Custom color to match color sample provided. 8. Glass Thickness: 1/2 inch (12.7 mm) laminated to 1-1/2 inch (38 mm) Insulated glass (in the case of 1-1/4 inch IG, the glass is 1/4 inch (6.35 mm) both sides of a 3/4 inch (19 mm) spacer). 9. Hardware: Multi point locking system. Provide the following: A. Keyed cylinders B. Center pivot hardware C. Handle, Atlanta style, finish: 1) Rustic Umber 2) Antique Brass 3) Polished Brass Resista 4) Satin Nickel Resista 5) Oil Rubbed Resista D. E. Handle, standard, finish: Page 15 of

16 1) Oil rubbed bronze 2) Brushed chrome 3) Solid brass 4) Black F. Shootbolt finish: 1) Solid brass 2) Stainless steel 3) Oil-rubbed bronze. G. Hinge finish: 1) Mill finish, painted to match Kynar finish 2) White ALUMINUM WOOD BIFOLD DOOR SYSTEM 1. Acceptable Product: Bifold doors as manufactured by Weiland Sliding Doors & Windows, Inc. Panel height up to 118 inches (2997 mm), width up to 39 inches (991 mm) and system length up to 48 feet (15 meters). 2. Operation: Moving glass wall system, pivoting at the panel hinge, allowing panels to accordion and stack away from the handle. Panels can be infold (fold to interior) or outfold (fold to exterior). 3. System Configuration: Provide the following system configuration: A. Doors fold to interior (infold). B. Doors fold to exterior (outfold). C. Opening at the center. D. Opening at the jamb. E. Man-door for entry/exit. Man-door operates without operating bifold doors. Man-door may be hinged on the jamb or the panel, when hinged from the panel the panel configuration must be an odd number of panels. 4. Size: Refer to Door Schedule on drawings for sizes. All door sizes are custom. Standard Bifold hardware allows panel sizes up to 118 inches (2997 mm) tall, maximum panel width of 39 inches (991 mm), and door systems up to 48 feet (15 meters) wide. 5. Floor Track: A. Standard drain track 1) Height: Bottom track extends 3/8 inch (9.5 mm) above finished floor. 2) In floor drainage: Provide drainage track system. 3) Material: 304 stainless steel. B. Slope threshold with standard drain track 1) Height: Bottom track extends 1-1/8 inch (28.5 mm) above exterior floor. 2) Material: 304 stainless steel, wood, aluminum. C. U-channel track 1) Height: Flush with finished floor. 2) For interior application only (no drains are included). 6. Head Track: Panels shall be edge (hinge) hung from a 3-3/8 inch (85.7 mm) wide head track with wood trim. 7. Side Jamb: 1-13/16 inches (46.0 mm) wide and 2-7/16 inches (61.9 mm) thick. 8. Frame and Sash: A. Aluminum with wood cladding: 6063 aluminum alloy with wood species indicated. 1) Panel Frame Thickness: 2-7/16 inches (61.9 mm), total thickness. 2) Sash Width: 2-9/16 inches (65.1 mm). Page 16 of

17 3) Separator Clip: PVC clip separates aluminum and wood. Clip shall provide sliding joint that allows materials to expand and contract independently. 4) Wood species: a. Alder (clear or knotty) b. Mahogany c. Cherry d. Douglas Fir e. Cedar f. Walnut g. Other:. 5) Aluminum finish: Kynar 70, meeting the performance criteria of AAMA specification and certified by the formulator as containing KYNAR 70 resin as manufactured by Elf Atochem North America, Inc. a. Color: As selected from manufacturer s standard colors b. Color: Custom color to match color sample provided. 9. Glass Thickness: 7/8 inch (22 mm) Insulated Glass (3/16 inch (4.8 mm) glass both sides of 1/2 inch (12.7 mm) spacer). 10. Hardware: Provide the following: A. Hinges: Concealed hinge system shall allow operable doors to be placed within the system to act as man-doors (French doors). B. Multi point locking system. C. Lever pull handle finish: 1) Brass 2) Black 3) White 4) Silver D. Lever pull handle with thumb turn finish: 1) Brass 2) Black 3) White 4) Silver E. Handle, keyed cylinder, finish: 1) Brass 2) Black 3) White 4) Silver F. Handle finish: 1) Brass 2) Black 3) White 4) Silver EXECUTION EXAMINATION 1. Do not begin installation until substrates have been properly prepared. Page 17 of

18 2. If substrate preparation is the responsibility of another installer, notify architect of unsatisfactory preparation before proceeding. PREPARATION 1. Clean surfaces thoroughly prior to installation. 2. Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions. INSTALLATION 1. Install in accordance with manufacturer's instructions. PROTECTION a. Protect installed products until completion of project. b. Touch-up, repair or replace damaged products before Substantial Completion. c. Finished Doors: Replace doors that are damaged or do not comply with requirements. Doors may be repaired or refinished if work complies with requirements and shows no evidence of repair or refinishing. Page 18 of

PRODUCT SPECIFICATIONS SLIDING GLAZED DOORS ORGANIZED BY MATERIAL

PRODUCT SPECIFICATIONS SLIDING GLAZED DOORS ORGANIZED BY MATERIAL Weiland Sliding Doors & Windows, Inc. manufactures aluminum, aluminum/wood, and wood sliding doors, Beefy bifold doors, bifold doors, swinging doors and windows. Weiland Sliding Doors and Windows, Inc.

More information

Inswing French Door. Inswing French Door

Inswing French Door. Inswing French Door Value and beauty merge as you open your home to the world with an elegant set of Sierra Pacific Inswing French Doors. Single or double, with or without sidelites, s are the most eloquent answer to access

More information

patio Sliding door Patio Sliding Door

patio Sliding door Patio Sliding Door Sierra Pacific s create a graceful transition from your indoor to outdoor living areas. While providing the perfect solution for a space-saving opening, these doors also optimize your view and allow your

More information

Sophisticated, durable, energy-efficient and secure, the Sierra Pacific Outswing Door is our most elegant answer to limited space.

Sophisticated, durable, energy-efficient and secure, the Sierra Pacific Outswing Door is our most elegant answer to limited space. For the perfect combination of form and function, choose a Sierra Pacific. In rooms where interior floor space is at a premium, these beautiful doors open to the exterior to create a pathway to your outdoor

More information

SOUTHEASTERN DOOR COMPANY

SOUTHEASTERN DOOR COMPANY SOUTHEASTERN DOOR COMPANY SERIES 5000 SLIDING GLASS DOOR SPECIFICATION GUIDE For impact glazing applications PART 1 GENERAL Appendix 1: Aluminum Sliding Glass Door drawings (enter descrition). Appendix

More information

BIFOLD DOORS. Product Features Specifications. J5 J7 Product Details. J Bifold Doors

BIFOLD DOORS. Product Features Specifications. J5 J7 Product Details. J Bifold Doors BIFOLD DOORS J3 J4 Product Features Specifications J5 J7 Product Details J J BIFOLD DOORS Canada and U.S.A. 1.800.563.9367 / International 204.326.6446 Douglas Fir Bifold Door (3L1R interior view) Loewen

More information

Sierra Pacific Windows

Sierra Pacific Windows Sierra Pacific Windows Bi-Fold Windows & Doors Sierra Pacific Bi-fold Windows and Doors glide smoothly to create large openings that transform your living spaces. With panels folding and stacking either

More information

170 Series Fiberglass Reinforced Polyester (FRP) Doors

170 Series Fiberglass Reinforced Polyester (FRP) Doors 170 Series Fiberglass Reinforced Polyester (FRP) Doors MANKO WINDOW SYSTEMS, INC. 800 HAYES DRIVE MANHATTAN, KANSAS 66502 PHONE: (800) 642-1488 (785) 776-9643 FAX: (800) 576-2656 (785) 776-9644 MANKO WINDOW

More information

SECTION SERIES 2000 SLIDING GLASS DOORS

SECTION SERIES 2000 SLIDING GLASS DOORS Page 1 of 5 SECTION 08 3213 SERIES 2000 SLIDING GLASS DOORS USE THIS SECTION WHEN SPECIFYING BOTTOM ROLLING SLIDING GLASS DOORS FOR INTERIOR USE ONLY. GLASS IS FURNISHED BY GLAZING SUB- CONTRACTOR AND

More information

135H/150H Series Medium & Wide Stile Heavy Wall Storefront Doors

135H/150H Series Medium & Wide Stile Heavy Wall Storefront Doors 135H/150H Series Medium & Wide Stile Heavy Wall Storefront Doors MANKO WINDOW SYSTEMS, INC. 800 HAYES DRIVE MANHATTAN, KANSAS 66502 PHONE: (800) 642-1488 (785) 776-9643 FAX: (800) 576-2656 (785) 776-9644

More information

Lift & Slide AW6700. (rev )

Lift & Slide AW6700. (rev ) Copyright 2010 Pacific Architectural Millwork All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means without permission by Pacific Architectural Millwork.

More information

Commercial Door. Commercial Door

Commercial Door. Commercial Door 269 Sierra Pacific Windows 800-824-7744 www.sierrapacificwindows.com Sierra Pacific Windows 270 The Sierra Pacific features the durability necessary to weather heavy foot traffic combined with the aesthetic

More information

SECTION TOILET PARTITIONS. A. Section Structural Steel: Supports for ceiling hung compartments.

SECTION TOILET PARTITIONS. A. Section Structural Steel: Supports for ceiling hung compartments. SECTION 10155 TOILET PARTITIONS PART 1 GENERAL 1.1 SECTION INCLUDES A. High pressure plastic laminate toilet compartments. 1.2 RELATED SECTIONS A. Section 05120 - Structural Steel: Supports for ceiling

More information

SECTION SLENDER PROFILE DOOR RAILS FOR INTERIOR ALL GLASS ENTRANCES. 1. Interior Slender Profile Door Rails for all glass entrance doors.

SECTION SLENDER PROFILE DOOR RAILS FOR INTERIOR ALL GLASS ENTRANCES. 1. Interior Slender Profile Door Rails for all glass entrance doors. 1 SECTION 08 4210 SLENDER PROFILE DOOR RAILS FOR INTERIOR ALL GLASS ENTRANCES PART 1 - GENERAL 1.01 SUMMARY A. This section includes: 1. Interior Slender Profile Door Rails for all glass entrance doors.

More information

SECTION ALL-GLASS ENTRANCES- PATCH AND PIVOT HARDWARE SYSTEMS

SECTION ALL-GLASS ENTRANCES- PATCH AND PIVOT HARDWARE SYSTEMS Page 1 of 6 SECTION 08 4210 ALL-GLASS ENTRANCES- PATCH AND PIVOT HARDWARE SYSTEMS PART 1 - GENERAL 1.01 SUMMARY A. This section includes: 1. Vestibule doors matching entrance doors. 2. Sidelites. B. Related

More information

SECTION TAJIMA MONUMENTAL FORMED BRONZE DOORS AND ENTRANCES

SECTION TAJIMA MONUMENTAL FORMED BRONZE DOORS AND ENTRANCES Page 1 of 5 SECTION 08 11 23 TAJIMA MONUMENTAL FORMED BRONZE DOORS AND ENTRANCES PART 1 - GENERAL 1.01 Section Includes A. Work shall include interior and exterior entrance doors and frames, sidelites

More information

Grabill Windows & Doors 7463 Research Drive Almont, MI (810)

Grabill Windows & Doors 7463 Research Drive Almont, MI (810) Bringing Traditional Craftsmanship into the 21 st Century 7463 Research Drive Almont, MI 48003 (810) 798-2817 www.grabillwindow.com GRABILL WINDOWS & DOORS Page Contents 2 About Us 3 Architectural Windows

More information

This section is based on the products of Superseal Windows & Doors which is located at: 1815 Water Street.; Merrill, WI 54452;

This section is based on the products of Superseal Windows & Doors which is located at: 1815 Water Street.; Merrill, WI 54452; SECTION 085313 VINYL (PVC) WINDOWS BUILDERS SERIES, 8000 NEW CONSTRUCTION, 8500 REPLACEMENT ** NOTE TO SPECIFIER ** Superseal Windows & Doors vinyl windows and sliding patio doors. This section is based

More information

Awning Windows. Awning Windows

Awning Windows. Awning Windows Sierra Pacific Awning windows feature the versatility necessary for today s creative design teams. Integrate form and function with awning windows to express your unique architectural style. Mull Sierra

More information

Bi-Fold Doors & Windows ~ Multi-Slide Doors & Windows ~ Lift and Slide Doors

Bi-Fold Doors & Windows ~ Multi-Slide Doors & Windows ~ Lift and Slide Doors Specialty Bi-Fold ~ ~ Doors Specialty Specialty 231 Sierra Pacific Windows 800-824-7744 www.sierrapacificwindows.com Sierra Pacific Windows 232 Bi-Fold Bi-Fold Sierra Pacific Bi-fold Windows and Doors

More information

HLS One. The Complete Multipoint Hardware Package Edition 2

HLS One. The Complete Multipoint Hardware Package Edition 2 HLS One The Complete Multipoint Hardware Package Edition 2 Features & Benefits The Hardware 1. Manufactured from Stainless Steel for the highest level of corrosion resistance 2. Multiple locking points

More information

1070 SLIDING MALL FRONT

1070 SLIDING MALL FRONT 70 SLIDING MALL FRONT INDEX 1 PICTORIAL VIEW.................................... ELEVATION / VERTICAL SECTION DETAILS................ HORIZONTAL SECTION DETAILS...................... 5 STACK AREA LAYOUT...............................

More information

Wood-aluminum clad windows and patio doors

Wood-aluminum clad windows and patio doors Wood-aluminum clad windows and patio doors With pride and attention to details, state-of-the-art equipment and materials of leading German suppliers, with a reference for sustainable products, advanced

More information

PVC GARDEN DOOR R-1600

PVC GARDEN DOOR R-1600 PVC GARDEN DOOR R-1600 A HIGH PERFORMANCE HINGED DOOR Our aluminum sill designs accommodate any decor. OUTswing SILL Anodized aluminum sill cover Beautiful doors that dress any type of room. INswing configuration

More information

HSW75 All Glass Single Track Sliding System

HSW75 All Glass Single Track Sliding System INTRODUCTION HSW75 HSW75 All Glass Single Track Sliding System The HSW75 all glass single track sliding system offers cleanlined, transparent solutions with no vertical profiles for retail storefronts,

More information

SPECIFICATIONS. DIVISION 7 Thermal and Moisture Protection. Section Architectural Metal Panels. CMPS AP SERIES ALUMINUM PANELS

SPECIFICATIONS. DIVISION 7 Thermal and Moisture Protection. Section Architectural Metal Panels. CMPS AP SERIES ALUMINUM PANELS SPECIFICATIONS DIVISION 7 Thermal and Moisture Protection. Section 07420 Architectural Metal Panels. CMPS AP SERIES ALUMINUM PANELS PART 1 GENERAL 1.1 RELATED WORK.1 Section 04220 Concrete unit masonry.2

More information

E3 Architecture WINDERMERE PROJECT TECHNICAL GUIDE SWINGING TERRACE & FRENCH TERRACE DOORS

E3 Architecture WINDERMERE PROJECT TECHNICAL GUIDE SWINGING TERRACE & FRENCH TERRACE DOORS E3 Architecture WINDERMERE PROJECT TECHNICAL GUIDE SWINGING TERRACE & FRENCH TERRACE DOORS PRODUCT FEATURES SPECIFICATIONS STYLES Traditional, French, Camber Top, Quarter Round and Full Radius options.

More information

GLASS WALL POCKET DOORS

GLASS WALL POCKET DOORS GLASS WALL POCKET DOORS KWIK-WALL... One Source for Wall Systems. KWIK-WALL s Pocket Doors for glass wall systems bring you the clear solution to your space division requirements. The beauty and elegance

More information

SECTION METAL FRAMED SKYLIGHTS

SECTION METAL FRAMED SKYLIGHTS SECTION 08 6300 METAL FRAMED SKYLIGHTS PART 1 GENERAL 1.1 SUMMARY A. Section Includes: Custom fabricated fixed metal framed skylights. B. Related Sections: 1. Division 01 - Administrative, procedural,

More information

Doors Custom Solutions

Doors Custom Solutions Custom Solutions Doors Custom Solutions Raised Panel in Radius Globe Pattern Custom globe-shaped raised panel, double door with Mahogany wood species in a Coffee Bean interior stain Raised Panel in Radius

More information

Andersen Architectural Clad Casement Windows (2005 to Present)

Andersen Architectural Clad Casement Windows (2005 to Present) Andersen Architectural Clad Casement Windows (2005 to Present) What s in This Section............ Standard, European, and Fixed Casements.. Page 3 Parts Illustration... 3 Parts Illustration - Standard

More information

CertainTeed Patio Doors

CertainTeed Patio Doors CertainTeed Patio Doors Doors with more design flexibility A range of Standard, or French rail designs as well as Slimline and Hinged Styles Combinations with transoms and sidelites Long-lasting performance

More information

rethink the possibilities western The Natural Choice window systems series 2600 wood-clad multi-slide doors

rethink the possibilities western The Natural Choice window systems series 2600 wood-clad multi-slide doors rethink the possibilities western window systems The Natural Choice series 2600 wood-clad multi-slide doors a new lifestyle The greatness of a home is not measured in its size, but in the quality of life

More information

250 Series Windows Horizontal Sliding (OX) Window Detail

250 Series Windows Horizontal Sliding (OX) Window Detail 250 Series Windows Horizontal Sliding (OX) Window Detail 250 Series Windows Horizontal Sliding (OX) Window Detail This CSI Short Form Guide Specification implements the CSI Manual of Practice principle

More information

Guide Specification Section Interior Aluminum Doors and Frames

Guide Specification Section Interior Aluminum Doors and Frames Guide Specification Section 08 11 16 Interior Aluminum Doors and Frames SECTION 08 11 16 The Sliding Door Company s door and frame system includes glazed swing doors, sidelights, transoms, and fixed panels.

More information

SECTION 08560 SERIES 1500 VINYL PATIO DOORS

SECTION 08560 SERIES 1500 VINYL PATIO DOORS SERIES 1500 VINYL PATIO DOORS PART 1 GENERAL 1.1 SECTION INCLUDES A. Patio Doors 1.2 RELATED SECTIONS A. Section 05450: Cold Formed Metal Framing. B. Section 06100: Rough Carpentry. C. Section 06200: Finish

More information

3210 & 3210U Vertical Sliding, Single-Hung Windows

3210 & 3210U Vertical Sliding, Single-Hung Windows 3000 SERIES FIBERGLASS - Min 1 6 2 6 Max 4 0 7 6 Single-Hung Double Single-Hung - Min 3 0 2 6 Max 8 0 7 6 - Min 4 0 2 6 Max 12 0 7 6 Gable Top Single-Hung - Min 4 6 2 6 Max 9 0 7 6 Minimum egress is 3

More information

SECTION OVERHEAD COILING DOORS

SECTION OVERHEAD COILING DOORS SECTION 08 3323 OVERHEAD COILING DOORS PART 1 GENERAL 1.1 SECTION INCLUDES A. Rolling Steel Doors B. Guides and Framing 1.2 RELATED SECTIONS A. Section 04810 - Unit Masonry Assemblies: Prepared opening

More information

SECTION 08360 SECTIONAL OVERHEAD DOORS 521 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS

SECTION 08360 SECTIONAL OVERHEAD DOORS 521 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS SECTION 08360 SECTIONAL OVERHEAD DOORS 521 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS Display hidden notes to specifier by using Tools / Options / View / Hidden Text. On newer versions of Microsoft Word

More information

western transforming space window systems series 670 a new option for hinged window line

western transforming space window systems series 670 a new option for hinged window line western window systems a new option for transforming space series 670 hinged window line Western Window Systems a new way to live, a better way to build Since opening in 1959 in Phoenix, Western Window

More information

3642 & 3642U, 3662 & 3662U Fiberglass In-Swing French Doors

3642 & 3642U, 3662 & 3662U Fiberglass In-Swing French Doors 3642 & 3642U, 3662 & 3662U Fiberglass In-Swing French Doors 3000 SERIES FIBERGLASS X - Min 2 0 6 0 Max 3 0 8 0 - Min 5 0 6 0 Max 6 0 8 0 - Min 7 6 6 0 Max 9 0 8 0 1-panel X O X X - Min 10 0 6 0 Max 12

More information

MOLDED FIBERGLASS REINFORCED PLASTIC (MFRP) COLD STORAGE INFITTING DOORS AND CASINGS

MOLDED FIBERGLASS REINFORCED PLASTIC (MFRP) COLD STORAGE INFITTING DOORS AND CASINGS MOLDED FIBERGLASS REINFORCED PLASTIC (MFRP) COLD STORAGE INFITTING DOORS AND CASINGS PART 1 - GENERAL 1.1 SUMMARY A. This section details the following: 1. Molded Fiberglass Reinforced Plastic (MFRP) Cold

More information

SECTION STILE AND RAIL DOORS (Opaque/Painted Finish)

SECTION STILE AND RAIL DOORS (Opaque/Painted Finish) PART 1 GENERAL 1.01 SUMMARY SECTION 08 14 33 STILE AND RAIL DOORS (Opaque/Painted Finish) A. Related Documents Drawings and general provisions of the Contract, including General and Supplementary Conditions

More information

Andersen Complementary Clad & Wood Awning Windows (2005 to 2012) What s in This Section. Clad & Wood Awning Windows... Page 3. Part Illustrations...

Andersen Complementary Clad & Wood Awning Windows (2005 to 2012) What s in This Section. Clad & Wood Awning Windows... Page 3. Part Illustrations... Andersen Complementary Clad & Wood Awning Windows (2005 to 2012) What s in This Section Clad & Wood Awning Windows... Page 3 Part Illustrations... 3 Parts Illustration - Clad Awning Parts... 3 Parts Illustration

More information

CLEAR-DIVISIONS CENTERFOLD

CLEAR-DIVISIONS CENTERFOLD CLEAR-DIVISIONS CENTERFOLD Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS CENTERFOLD moveable The yellow highlighted areas in

More information

3626 & 3626U Series Fiberglass Sliding French-Style Doors

3626 & 3626U Series Fiberglass Sliding French-Style Doors 3626 & 3626U Series Fiberglass Sliding French-Style Doors 3000 SERIES FIBERGLASS X O O X 2-panel 2-panel O X O RECOMMENDED STANDARD SIZES rough opening width height 30 36 60 72 96 108 120 144 6-8" 1 1

More information

Guide Specification Section Interior Sliding Glass Doors

Guide Specification Section Interior Sliding Glass Doors Guide Specification Section 08 32 13 Interior Sliding Glass Doors SECTION 08 32 13 The Sliding Door Company s namesake product combines operable sliding glass doors with stationary glazed panels to create

More information

SECTION C. Section Metal Fabrications: Steel frame and supports.

SECTION C. Section Metal Fabrications: Steel frame and supports. SECTION 08361 RESIDENTIAL OVERHEAD DOORS IMPRESSION COLLECTION INSULATED FIBERGLASS DOORS SERIES 980 Display hidden notes to specifier by using Tools / Options / View / Hidden Text. On newer versions of

More information

Optimum View Series Windows & Doors. Sliding Patio & Swinging French Doors

Optimum View Series Windows & Doors. Sliding Patio & Swinging French Doors Optimum View Series Windows & Doors VINYL SLIDING PATIO DOORS Available in Standard (2 1/2 wide rails) and French-style (4 1/2 wide rails), Bay View Sliding Patio Doors are built for beauty and comfort

More information

HORIZONTAL ROLLING WINDOW

HORIZONTAL ROLLING WINDOW 8500 HORIZONTAL ROLLING WINDOW Rolling window shall be 8500 Series as manufactured by Lawson Industries, Inc., Medley, Florida, USA and shall conform to AAMA/ NWWDA 101/I.S.2.-97, for HS-R 50, A.A.M.A.

More information

RULON WOOD CUBE SUSPENDED CEILING SYSTEMS ARCHITECTURAL SPECIFICATIONS

RULON WOOD CUBE SUSPENDED CEILING SYSTEMS ARCHITECTURAL SPECIFICATIONS 10/3/2012 RULON WOOD CUBE SUSPENDED CEILING SYSTEMS ARCHITECTURAL SPECIFICATIONS PART 1 - GENERAL A. The Wood Cube Suspended Ceiling Systems covered by this specification shall be the products of the Rulon

More information

SECTION INTERIOR ALUMINUM DOORS AND FRAMES PART 1 - GENERAL 1.1 RELATED DOCUMENTS

SECTION INTERIOR ALUMINUM DOORS AND FRAMES PART 1 - GENERAL 1.1 RELATED DOCUMENTS SECTION 081216 - INTERIOR ALUMINUM DOORS AND FRAMES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division

More information

B. ASTM D Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Self-Supporting Plastics in a Horizontal Position.

B. ASTM D Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Self-Supporting Plastics in a Horizontal Position. SECTION 08221 FIBERGLASS REINFORCED DOOR AND FRAME SYSTEM PART 1 GENERAL 1.1 SECTION INCLUDES A. Fiberglass Reinforced Plastic (FRP) Doors. B. Fiberglass Door Frames. C. Fiberglass Louvers. D. Fiberglass

More information

BI-FOLDING GLASS WALL SYSTEM C.R. LAURENCE COMPANY

BI-FOLDING GLASS WALL SYSTEM C.R. LAURENCE COMPANY DOORS 08 3513 MONTEREY BI-FOLDING GLASS WALL SYSTEM Manufactured By U.S. ALUMINUM Cat. No. MO5580 Transform an Ordinary Space into the Extraordinary with the New C.R. LAURENCE COMPANY Worldwide Manufacturer

More information

Andersen Intelligent Quote (iq) Software Update

Andersen Intelligent Quote (iq) Software Update Andersen Intelligent Quote (iq) Software Update RELEASE: Version 16.2 October 24, 2016 SUBJECT: EFFECTIVE: Andersen Intelligent Quote (iq) Software Update Immediately Version 16.2 Overview Andersen is

More information

Beautiful, Durable and Contemporary Design for Any Home

Beautiful, Durable and Contemporary Design for Any Home Doors Vinyl Patio Door Patio Systems POWERED KensingtonGlass KensingtonGlass POWERED BY BY Beautiful, Durable and Contemporary Design for Any Home Sliding Patio Door Sliding Patio Door The Kensington Sliding

More information

SWANKE HAYDEN CONNELL ARCHITECTS BANKNOTE BUILDING INTERIOR TENANT FIT-OUT BRONX, N.Y. PROJECT F SECTION FLUSH WOOD DOORS

SWANKE HAYDEN CONNELL ARCHITECTS BANKNOTE BUILDING INTERIOR TENANT FIT-OUT BRONX, N.Y. PROJECT F SECTION FLUSH WOOD DOORS SECTION 081416 - FLUSH WOOD DOORS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification

More information

Lift and Slide. Superior Quality and Durability. Effortless Operation and Outstanding Tightness. Warranties EFFORTLESS OPERATION OVERSIZED PANEL DOORS

Lift and Slide. Superior Quality and Durability. Effortless Operation and Outstanding Tightness. Warranties EFFORTLESS OPERATION OVERSIZED PANEL DOORS Superior Quality and Durability Frame and Sashes 7 ¼ sturdy all-vinyl frame, mechanically assembled 3 ½ rigid welded sashes reinforced at stiles for superior stiffness and optimal operation 1 Low-E with

More information

SECTION MINIMALIST EXTRUDED ALUMINUM DOOR FRAMES

SECTION MINIMALIST EXTRUDED ALUMINUM DOOR FRAMES SECTION 08 12 13 MINIMALIST EXTRUDED ALUMINUM DOOR FRAMES PART 1 GENERAL REQUIREMENTS 1.1 RELATED SECTIONS A. Division 08 Flush Wood Doors and Clad Wood Doors B. Division 08 - Door Hardware 1.2 REFERENCES

More information

Soundmaster & Modernfold Technical Data Accordion Folding Doors

Soundmaster & Modernfold Technical Data Accordion Folding Doors This specification along with product information and model details can be downloaded from www.modernfold.com SPECIFICATION - SECTION 08 35 13 ACCORDION FOLDING DOORS PART 1 GENERAL 1.1 RELATED DOCUMENTS

More information

Slide & Seal AW6700. (rev )

Slide & Seal AW6700. (rev ) Copyright 2013 Pacific Architectural Millwork All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means without permission by Pacific Architectural Millwork.

More information

RULON PANEL GRILLE SUSPENDED WOOD CEILING SYSTEM ARCHITECTURAL SPECIFICATIONS

RULON PANEL GRILLE SUSPENDED WOOD CEILING SYSTEM ARCHITECTURAL SPECIFICATIONS 10/3/2012 RULON PANEL GRILLE SUSPENDED WOOD CEILING SYSTEM ARCHITECTURAL SPECIFICATIONS PART 1 - GENERAL A. The Panel Grille Suspended Wood Ceiling Systems covered by this specification shall be the products

More information

Wood Folding Systems TABLE OF CONTENTS WOOD FOLDING SYSTEMS

Wood Folding Systems TABLE OF CONTENTS WOOD FOLDING SYSTEMS TABLE OF CONTENTS WOOD FOLDING SYSTEMS Wood Folding Systems Introduction Systems and Common Features....1 Comparison of Systems... 2 Suggested Selection Procedure.... 3 Standard Configurations... 4 Unhinged

More information

Union County Vocational - Technical Schools Scotch Plains, New Jersey

Union County Vocational - Technical Schools Scotch Plains, New Jersey SECTION 081216 - INTERIOR ALUMINUM DOORS AND FRAMES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division

More information

new A n O p e r a b l e S t o r e f r o n t S y s t e m W i t h F u n c t i o n i n g D o o r s

new A n O p e r a b l e S t o r e f r o n t S y s t e m W i t h F u n c t i o n i n g D o o r s 01- Table of Contents A n O p e r a b l e S t o r e f r o n t S y s t e m W i t h F u n c t i o n i n g D o o r s SECTION PAGE SPECIFICATIONS...02- TECNICAL DATA...03- SPECIAL FEATURES...0- TYPICAL DETAILS...05-

More information

BRIGHTON SERIES (R40, LC50) OUT-SWINGING PATIO DOOR 5 7/8 FRAME DEPTH (OVERALL)

BRIGHTON SERIES (R40, LC50) OUT-SWINGING PATIO DOOR 5 7/8 FRAME DEPTH (OVERALL) BRIGHTON SERIES (R40, LC50) OUT-SWINGING PATIO DOOR 5 7/8 FRAME DEPTH (OVERALL) FEATURES 1.) Available Configurations -Swinging Patio Door -X, O, OO, OOO, XX, XO, OX, XOO, OOX, OXO -6 8, 6 10, 8 OR 9 Heights

More information

RULON WOOD CUBE SUSPENDED CEILING SYSTEMS ARCHITECTURAL SPECIFICATIONS

RULON WOOD CUBE SUSPENDED CEILING SYSTEMS ARCHITECTURAL SPECIFICATIONS 5/13/2011 RULON WOOD CUBE SUSPENDED CEILING SYSTEMS ARCHITECTURAL SPECIFICATIONS PART 1 - GENERAL A. The Wood Cube Suspended Ceiling Systems covered by this specification shall be the products of the Rulon

More information

6204/8204 Parts Reference Catalog FOR PRODUCT PRODUCED AFTER 02/06

6204/8204 Parts Reference Catalog FOR PRODUCT PRODUCED AFTER 02/06 SASH WIDTH INTERIOR DAYLIGHT OPENING EXTERIOR DAYLIGHT OPENING JAMB/UNIT WIDTH ROUGH OPENING WIDTH 64/4 Parts Reference Catalog FOR PRODUCT PRODUCED AFTER 02/06 #14632 Casement Casement Awning awning French

More information

City of San Diego, CWP Guidelines

City of San Diego, CWP Guidelines PART 1 -- GENERAL SECTION 08520-1.1 WORK OF THIS SECTION City of San Diego, CWP Guidelines A. The WORK of this Section includes providing aluminum windows with frames, bracing, glazing attachments, screens,

More information

Division 8 - Doors and Windows Section 08212

Division 8 - Doors and Windows Section 08212 PART 1 GENERAL 1.1 RELATED DOCUMENTS: A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division-1 Specification sections, apply to work of this section.

More information

Contents Full Mortise Hinges Heavy Weight Standard Weight Concealed Hinges Startec Tectus Concealed Mortise Mounted Concealed Jamb Door Closer

Contents Full Mortise Hinges Heavy Weight Standard Weight Concealed Hinges Startec Tectus Concealed Mortise Mounted Concealed Jamb Door Closer DOOR HINGES Contents Full Mortise Hinges Heavy Weight For Interior Doors....3 For Exterior Doors.... Standard Weight For Interior Doors....,.7 For Exterior Doors....6 Electrified....8 Spring Hinge....9

More information

CONTENTS 1 COMPONENT PARTS 2 SLIDING DOORS 3 PIVOT DOORS 4 WOOD DOORS 5 FIXED PANELS 6 FOLDING WALLS 7 HARDWARE 8 LEED 9 CONTACT INFORMATION

CONTENTS 1 COMPONENT PARTS 2 SLIDING DOORS 3 PIVOT DOORS 4 WOOD DOORS 5 FIXED PANELS 6 FOLDING WALLS 7 HARDWARE 8 LEED 9 CONTACT INFORMATION PK-30 system CONTENTS 1 COMPONENT PARTS 2 SLIDING DOORS 3 PIVOT DOORS 4 WOOD DOORS 5 FIXED PANELS 6 FOLDING WALLS 7 HARDWARE 8 LEED 9 CONTACT INFORMATION PK-30 system 212.473.8050 www.pk30.com PK-30 system

More information

Frameless All Glass Wall Systems

Frameless All Glass Wall Systems INTRODUCTION FRAMELESS GLASS WALL SYSTEMS Frameless All Glass Wall Systems NanaWall offers four distinct frameless all glass wall system options for interior and exterior applications HSW75, FSW75, CSW75,

More information

RULON SCORED ACOUSTICAL CEILING SYSTEM ALURATONE 900, 930, 940 & 950 ARCHITECTURAL SPECIFICATIONS

RULON SCORED ACOUSTICAL CEILING SYSTEM ALURATONE 900, 930, 940 & 950 ARCHITECTURAL SPECIFICATIONS 10/3/2012 RULON SCORED ACOUSTICAL CEILING SYSTEM ALURATONE 900, 930, 940 & 950 ARCHITECTURAL SPECIFICATIONS PART 1 - GENERAL A. The Rulon Aluratone Ceiling Systems covered by this specification shall be

More information

Simplex. Hinges GENERAL INFORMATION DETERMINE TYPE OF HINGE

Simplex. Hinges GENERAL INFORMATION DETERMINE TYPE OF HINGE GENERAL INFORMATION DETERMINE TYPE OF HINGE What is the door material (wood, stainless, fiber glass, or hollow metal)? What is the frame material (wood, stainless steel, channel iron, or hollow metal)?

More information

CLEAR-DIVISIONS VARIOFOLD

CLEAR-DIVISIONS VARIOFOLD CLEAR-DIVISIONS VARIOFOLD Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS VARIOFOLD moveable The yellow highlighted areas in the

More information

3250 SERIES THERMAL WINDOW

3250 SERIES THERMAL WINDOW 3250 SERIES THERMAL WINDOW DESCRIPTION PROJECT-OUT CASEMENT PROJECT-IN AAMA Designation P-HC65 C-HC65 P-HC65 P-AW65 C-AW65 P-AW65 ASTM F588 (Forced Entry) Grade 40 Grade 40 Grade 40 CRF Rating 54 54 54

More information

Milgard WoodClad Series Fiberglass Doors - 3-Part Specification

Milgard WoodClad Series Fiberglass Doors - 3-Part Specification GENERAL NOTES TO SPECIFIER: THIS SPECIFICATION SECTION HAS BEEN PREPARED TO ASSIST DESIGN PROFESSIONALS IN THE PREPARATION OF PROJECT OR OFFICE MASTER SPECIFICATIONS. IT FOLLOWS GUIDELINES ESTABLISHED

More information

1036 Parkway Ct. Phone: 770-932-0202 Buford, GA 30518 Fax: 770-945-0041

1036 Parkway Ct. Phone: 770-932-0202 Buford, GA 30518 Fax: 770-945-0041 CONSTRUCTION 1. A. GENERAL 1.A.1. The intent of this specification is to set forth construction and design standards that will result in an installation of modular cabinetry requiring FLUSH OVERLAY CONSTRUCTION.

More information

CLEAR-DIVISIONS VARIOTEC TRIMLESS

CLEAR-DIVISIONS VARIOTEC TRIMLESS CLEAR-DIVISIONS VARIOTEC TRIMLESS Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS VARIOTEC TRIMLESS moveable glass wall system.

More information

SECTION SECTIONAL OVERHEAD DOORS. Display hidden notes to specifier. (Don't know how? Click Here)

SECTION SECTIONAL OVERHEAD DOORS. Display hidden notes to specifier. (Don't know how? Click Here) SECTION 08360 SECTIONAL OVERHEAD DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Insulated Sectional Overhead Doors. B. Steel Sectional Overhead

More information

2300 Series Terrace Doors

2300 Series Terrace Doors 2300 Series Terrace Doors MANKO WINDOW SYSTEMS, INC. 800 HAYES DRIVE MANHATTAN, KANSAS 66502 PHONE: (800) 642-1488 (785) 776-9643 FAX: (800) 576-2656 (785) 776-9644 MANKO WINDOW SYSTEMS, INC. 11000 EAST

More information

AA TM 900 Thermal Windows

AA TM 900 Thermal Windows JULY, 2016 INDEX 1 FIXED WINDOW... 3-6 PROJECT-IN WINDOW... 7-10 PROJECT-OUT WINDOW... 11-14 INSWING CASEMENT WINDOW... 15-18 OUTSWING CASEMENT WINDOW... 19-23 MULLIONS... 25-29 RECEPTORS AND SUB SILLS...

More information

ACCORDION FOLDING DOORS

ACCORDION FOLDING DOORS SECTION 08351 ACCORDION FOLDING DOORS Woodfold-Marco Mfg., Inc. Voice 503-357-7181 P.O. Box 346 FAX 503-357-7185 Forest Grove OR 97116 http://www.woodfold.com ( due to continuing product development, these

More information

ELLISON BRONZE SECTION WOOD BALANCED DOOR ENTRANCES WITH BRONZE FRAMES

ELLISON BRONZE SECTION WOOD BALANCED DOOR ENTRANCES WITH BRONZE FRAMES ELLISON BRONZE SECTION 08 42 36 Section K-2 WOOD BALANCED DOOR ENTRANCES WITH BRONZE FRAMES Display hidden notes to specifier by using Tools / Options / View / Hidden Text PART 1 GENERAL 1.01 DESCRIPTION

More information

SECTION VINYL SIDING

SECTION VINYL SIDING SECTION 074600 VINYL SIDING PART 1 GENERAL 1.1 SECTION INCLUDES A. Vinyl siding. B. Vinyl soffits. C. Accessories and trim. 1.2 RELATED SECTIONS A. Section 06100 - Framing and Sheathing. B. Section 07260

More information

Unforgettable first impressions.

Unforgettable first impressions. Unforgettable first impressions. Portella offers flexible steel door and window design solutions. Limitless design options are available to complement your contemporary building project or historical replication.

More information

Milgard Style Line Series Vinyl Window 3-Part Specification

Milgard Style Line Series Vinyl Window 3-Part Specification GENERAL NOTES TO SPECIFIER: THIS SPECIFICATION SECTION HAS BEEN PREPARED TO ASSIST DESIGN PROFESSIONALS IN THE PREPARATION OF PROJECT OR OFFICE MASTER SPECIFICATIONS. IT FOLLOWS GUIDELINES ESTABLISHED

More information

University of Missouri St. Louis UMSL Project #S7628 Campus Police Building Building Modifications & Renovations R&B Project # Building Upgrades

University of Missouri St. Louis UMSL Project #S7628 Campus Police Building Building Modifications & Renovations R&B Project # Building Upgrades SECTION 12 2113 - HORIZONTAL LOUVER BLINDS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Special Conditions and Division 01 Specification

More information

E300N SERIES (C40) SLIDING GLASS DOOR 5 FRAME DEPTH

E300N SERIES (C40) SLIDING GLASS DOOR 5 FRAME DEPTH E300N SERIES (C40) SLIDING GLASS DOOR 5 FRAME DEPTH FEATURES 1.) Available Configurations -Thermalized sliding glass door 2.) Main frame / Sash -Thermal breaks in main frame and sash -Marine-glazed sash

More information

1173 Awning Window SPECIFICATIONS

1173 Awning Window SPECIFICATIONS 1173 Awning Window SPECIFICATIONS Frame and Sash All frame and sash profiles are extruded by North Star Windows from virgin PVC powder material. Frames and sash are multichamber design for strength and

More information

Commercial and Impact Rated Sliding Glass Doors for Retrofit or New Construction

Commercial and Impact Rated Sliding Glass Doors for Retrofit or New Construction Sliding Glass Doors Sliding Glass Doors Commercial and Impact Rated Sliding Glass Doors for Retrofit or New Construction Legacy at Town Lake - Austin, TX Series 9910, Sandstone Promenade Apartments - Washington,

More information

Automatic Door Selection Guide

Automatic Door Selection Guide Automatic Door Selection Guide AAADM 1300 Sumner Avenue Cleveland, OH 44115 P: 216-241-7333 F: 216-241-0105 aaadm@aaadm.com Automatic Door Selection Guide General: The members of AAADM manufacture an assortment

More information

TCC/SHORE TRANSIT BUS MAINTENANCE FACILITY - PHASE II

TCC/SHORE TRANSIT BUS MAINTENANCE FACILITY - PHASE II SECTION 081416 - FLUSH WOOD DOORS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

SECTION 0810 HOLLOW METAL DOORS AND FRAMES. 1. Hollow metal doors. 2. Pressed steel frames as follows: a. Frames for hollow metal doors.

SECTION 0810 HOLLOW METAL DOORS AND FRAMES. 1. Hollow metal doors. 2. Pressed steel frames as follows: a. Frames for hollow metal doors. SECTION 0810 HOLLOW METAL DOORS AND FRAMES PART 1.00 - GENERAL 1.01 SCOPE OF WORK: A. WORK INCLUDED: The Contractor shall furnish all materials, labor, equipment and services necessary to fabricate, furnish,

More information

Aluminum Sliding Glass Corner Meet Door Series SGD780

Aluminum Sliding Glass Corner Meet Door Series SGD780 WinGuard brand windows refer only to those products that are glazed with PGT laminated glass. Monolithic glazing does not provide hurricane protection. Specifications: Door members are extruded from a

More information

Signature. ILLUSTRATED Construction Details. Kewaunee. Series Quality Wood Laboratory Casework

Signature. ILLUSTRATED Construction Details. Kewaunee. Series Quality Wood Laboratory Casework ILLUSTRATED Scientific Corporation PO Box 1842 Statesville, NC 28687-1842 Phone: 704-873-7202 Fax: 800-932-3296 Email: marketing@kewaunee.com Web Page: www.kewaunee.com Drawer Slides Epoxy Coated Runners

More information

Product Guide Specification

Product Guide Specification October 2011 3948 Townsfair Way, Suite 200 Columbus, Ohio 43219 Toll Free 800-746-6686 Website www.simonton.com E-Mail archdetails@simonton.com Product Guide Specification Specifier Notes: This product

More information