LP1 SERIES 120/277V LED SUPERSPOT

Transcription

1 LP1 SERIES /V LED SUPERSPOT This versatile spotlight creates a high intensity shaft of light that is perfect for long-throw applications. optic produces 0,000 CBCP with 0 lumens at 1 watts System efficiency up to 66 lumens/watt Exceeds ANSI specifications by maintaining extremely tight color consistency over the life of the fixture Tested to LM and LM0 Protocols 0,000 hour life to 0% lumen output, L 0 at F max ambient Hidden integral electronic driver, compatible with trailing edge electronic low voltage dimmers (dimmable to %) Optional addressing and control of fixture using LumenTalk, through DMX, Triac, ELV or 0-V panels, and dimmable to 1% Choice of beam spread (fixed optics) Color Rendering Index (CRI) 0+ Color consistency, MacAdam ellipses No UV or IR emissions; no mercury or lead On/off safety switch (on most mounting types) Field replaceable, connector less LED module Sturdy aluminum housing Self locking vertical and horizontal focusing Internal multiple accessory clips accept B size LSI gels and accessories Finishes: LSI Black, White, and Silver Fixture weight: lbs MOUNTING OPTIONS LP1-XXXXX-XXXXXX-00-TEXXXX Lexan fitting for 1 and circuit LSI track. With On/Off switch. LP1-XXXXX-XXXXXX-0E-EDXXXX Lexan fitting with intergral dimmer (for use with ED dimming driver %) / LP1-XXXXX-XXXXXX-G-XXXXXX C-clamp for pipes from / to O.D. With switch, 6-foot -wire grounding cord and NEMA -1P plug. 1/16 LP1-XXXXX-XXXXXX-LT-LTXXXX Lexan fitting with LumenTalk dimmer (for use LT dimming driver (<1%) LP1-XXXXX-XXXXXX-G-XXXXXX Universal fitting for Unistrut Systems and any screw or bolt-up applications. With switch, 6-foot -wire grounding cord and NEMA -1P plug. 6 /16 LP1-XXXXX-XXXXXX-A-XXXXXX Canopy for permanent mounting on standard octagonal junction boxes. Other Options (Consult Factory): Custom color, RAL palette Security/Worklite Fixture, add suffix EF (track) mounting option only. /16 /16

2 /16 16 mm / mm / 1mm /16 6mm / 16mm ORDERING INFORMATION 1. Choose the desired (ZE) for X Array. Choose the numeric code to designate the desired LED Rating Lumens/CRI/Wattage (-0) for 0/0/1. Choose the numeric code to designate the desired Color Temperature () for 00K (0) for 000K For other CCT, consult factory. Use the following numeric code to designate the Optic (0) for mm/ (1) for mm/1 () for mm/. Select your Mounting Option (00) Track Fitting (0E) Track Fitting with Integral Dimmer (LT) Lumentalk Fitting (G) Unistrut Fitting (G) C-clamp Fitting (A) Canopy Fitting 6. Choose other fixture Options: Coiled Cord is available only with G and G mounting options. Change G to C and G to C. (When a coiled cord is not specified, a straight cord is provided.). Choose the letter code for Dimming Type (TE) Trailing Edge (ELV Reverse Phase) (%) (LE) Leading Edge (Triac) (%, V only) (ED) Integral Dimming (%) (0E & A fitting only) (LT) Lumentalk (<1%) (LT fitting only) () 0-V (%) (A fitting only) (DX) DMX (0%). Choose the desired Voltage: () for V (0) for 0-0V () for V. Choose a Finish for your fixture: Black (B) White (W) Silver (S) Example: LP1 - ZE TE B FIXTURE LED LED COLOR TEMP OPTIC FITTING DRIVER VOLTAGE COLOR MODULE RATING. Don t forget your Accessories! DRIVER TYPE (Electronic) Input Power (A) - V 0.1 Input Power (A) - V 0.0 Wattage 1 Power Factor - V 0. Chromaticity Specifications R g - Gamut LED R a - CRI R f - Fidelity Area ZE 0 ACCESSORIES Other accessories: Color and Spread Gels Size B (0.00 thick) Beam Softener Gel - R1-B (0% Light Reduction) Louver Hex B Backer Ring B External Accessory Cartridge LP1* Hood LP1* -Way Barndoor LP1* Louver LP1* * External Accessory Cartridge LP1 required for use with hoods, louver and barndoor. Solid State /16

3 LP1 SERIES PERFORMANCE The performance characteristics of the LP SuperSPOT family of products can be customized based on the LED module and the optic selected. Each available LED module is defined by four characteristics the color rendering index (CRI), the correlated color temperature (CCT), the power that it uses (watts), its available lumens and beam spread. Note that available lumens is a theoretical value that represents the light output of the module on its own no fixture or optic attached. In the LSI part number, the LED module is specified with a letter and a number that immediately follow the product series number. For example, in the part number LP1-ZE TEB, the ZE-000 represents an LED module with an output of 0 lumens, a CRI of 0, a power usage of 1 watts, color temperature of 000K and a -Degree beam. Additional parameters, such as Center Beam Candle Power (CBCP), Delivered Lumens, and Efficiency (Lumens per Watt) are all shown in a table that is organized by LED module and optic combination. CBCP = Center Beam Candle Power Lumens/CRI/Wattage SKU Code Nominal Fixture Power (+/- 0%), Watts Maximum Inrush Current Amps Optic (Reflector) Lumens/CRI/Wattage 0 1 0/0/ Delivered Lumens Optic (Reflector) Lumens/CRI/Wattage 0 1 0/0/ Efficiency = Lumens Per Watt Optic (Reflector) Lumens/CRI/Wattage 0 1 0/0/ Minimum Power Factor 0. Inrush current is instantaneous current drawn by the LED only when fixture is initially powered on or instantaneously changed from full dim to full bright. For more details see Dimming Application Sheet, IS-0. /16

4 LP1 SERIES PHOTOMETRIC DATA PHOTOMETRIC DATA LP1 Series Beam Spread (minimum) Center Beam Candlepower 0, CRI 0+ LP1 Series (preliminary) Beam Spread (minimum) 1 Center Beam Candlepower 16,00 CRI 0+ LP1 Series (preliminary) Beam Spread (minimum) Center Beam Candlepower,00 CRI 0+ o o 00 1 o All Distances in Feet LP Solid State /16

5 LP1 ACCESSORIES LOUVER HEX B 1/ thick Hexcell black metal louver used for thin profile. HOOD LP1* 6 inch deep hood. Interior flocking included to control spill light and glare. Black finish. BACKER RING B Stainless steel ring to hold gel when no other size B accessory is being used. -WAY BARNDOOR LP1* -way individually adjustable blades for control of light beam. Black finish. EXTERNAL ACCESSORIES CARTRIDGE LP1 External Accessory cartridge to hold hoods, barndoor or louver. Black finish. LOUVER LP1* Cellular black metal louver, controls spill light and glare, cutoff *External Accessory Cartridge LP1 required /16

6 LP1 SERIES GELS As the foremost innovator in accent lighting, LSI offers a complete range of pre-cut Gels to modify the spread and color of light for the LumeLEX LED Series. LP1 SPREAD GELS Size: B ( mm diameter) Spread Gel GEL-L1-B GEL-L-B GEL-L-B GEL-L0-B GEL-L0-B GEL-L0-B GEL-L60-B GEL-L0-B GEL-L0B-B GEL-L0B-B GEL-L60B1-B GEL-L60B-B GEL-LB-B GEL-L0B60-B GEL-R1-B 1 Spread Gel Spread Gel Spread Gel 0 Spread Gel 0 Spread Gel 0 Spread Gel 60 Spread Gel 0 Spread Gel 0 by Spread Gel 0 by 0. Spread Gel 60 by 1 Spread Gel 60 by Spread Gel by Spread Gel 0 by 60 Spread Gel Beam Softener LP1 COLOR GELS Size: B ( mm diameter) GEL-R-B GEL-R-B GEL-R1-B GEL-R1-B GEL-R1-B GEL-R1-B GEL-R-B GEL-R6-B GEL-R-B GEL-R-B GEL-R6-B GEL-R1-B GEL-R-B GEL-R1-B GEL-R-B GEL-R-B GEL-R1-B GEL-R-B GEL-R-B GEL-R-B GEL-R0-B Gel Color Bastard Amber Pale Yellow Straw Straw Tint Medium Straw Golden Amber Orange Red Light Red Medium Red Lavender Booster Blue Sea Blue Azure Blue Primary Green Light Grey Medium Grey Light Frost Tough Silk Lt. Hamburg Frost Blue Diffusion Rose Gold Size: B ( mm diameter) Gel Color GEL-R1-B Canary GEL-R0-B Half Blue GEL-R1-B Shell Pink GEL-R-B Sapphire Blue GEL-R-B Pale Grey GEL-R001-B Storaro Red GEL-R00-B Storaro Green GEL-R00-B Storaro Violet GEL-R0-B Full Blue GEL-R06-B Third Blue GEL-R16-B Eighth Blue (Boosts 00K to 00K) GEL-R1-B Tough 1/ Minusgreen GEL-R-B Roscosun (1/ CTO) (Reduces 00K to 00K) GEL-R1-B Full Straw (CTS) GEL-R-B Quarter Straw (CTS) GEL-R0-B CalColor 0 Cyan GEL-R1-B CalColor 1 Green GEL-R0-B CalColor 0 Green GEL-R60-B CalColor 60 Pink GEL-R0-B CalColor 0 Pink GEL-R0-B CalColor 0 Lavender Solid State /16