Hilti Diamond Coring Systems BRILLIANT PERFORMANCE. Hilti. Outperform. Outlast.

Transcription

1 Hilti Diamond Coring Systems BRILLIANT PERFORMANCE. Hilti. Outperform. Outlast. 1

2 Hilti X-Change module UNMATCHED FLEXIBILITY. Three, two, done. Re-tipping using Hilti s innovative change module (X-CM) system makes used core bits as good as new. With the removable Hilti X-Change Ring, re-tipping is simpler, faster, and more efficient than ever before: just push, twist, click and re-tipping is done. A job that used to take hours can now be done in just a few minutes. This means greater flexibility on the jobsite, reduced downtime and the ability to get unstuck quickly, resulting in improved productivity. Laser welded segments Ultimate flexibility Ultimate versatility Keyless core bit changing The diamond segments of the X-Change module are laser welded to avoid breakage and 8mm in height for added durability. Choose the ring specification for your base material: Light Masonry (LM) Light Concrete Life (LCL) Choose your barrel length and diameter: Available in lengths: 20mm or 0mm Available in diameter range: 52mm - 162mm High quality quick release connection end (BI+) for easy operation. No tools involved. (For use with DD 120, DD 10, DD 150-U) Easy removal The inner geometry of the ring allows easier and faster core removal. In standard conditions, concrete or masonry cores simply slip through the tube without forceful aid of a hammer, thus greatly preserving the round shape of the barrel and the core bit s lifetime. Laser welded pins The barrel s connecting interface contains laser welded pins and grooves preventing involuntary ring loss and stability to the system during handheld drilling on masonry. T shaped locking mechanism User friendly locking mechanism makes the X-Change module system easy to use. Specifications Connection end Available lengths Diameter range Hilti X-Change module LCL (Light Concrete Life) and LM (Light Masonry) BI+ 20 and 0 mm mm COST EFFICIENT PERFORMANCE The Hilti X-Change module provides performance that outlasts at a lower cost per hole, as each barrel can be re-used and re-tipped up to three rings on average. FAST RE-TIPPING Thanks to its smart, geometric design and removable Hilti X-Change module, re-tipping is simpler, faster, and more efficient than ever before. Remove the ring with a screwdriver, push, twist, click and re-tipping is done! GET UNSTUCK With the Hilti X-Change module, removal of stuck cores is easy and effortless just disengage the ring and slide the core out of the barrel. ALL YOU NEED IN ONE BAG Say goodbye to bulk. The Hilti X-Change module s removable tip makes it possible for you to pack multiple rings to meet your specification needs for diameter and base material in one small, portable bag. 2

3 Hilti diamond coring systems Hilti universal vacuum cleaners THE PERFECT MATCH. DD 150-U and X-CM system. THEY JUST GOT EVEN BETTER. The all new VC 20-U and VC 0-U. Versatile and powerful. Simply one for all. Hand-guided or on the drill stand. Wet or dry. The Hilti DD 150-U diamond coring system is clearly the ideal solution for a wide range of drilling applications in concrete or masonry. Combined with Hilti s new innovative X-Change module system and its capability to adapt to a variety of specifications and base materials, this match in outstanding performance, efficiency and versatility are simply unique. Power up. The VC 20-U and the VC 0-U are the ultimate universal vacuum cleaners for dry and wet applications. Hilti vacuum cleaners are ideal for collecting fine dust from a range of applications including: diamond cutting, grinding, and slitting as well as slurry from coring tools and other wet cleaning applications. Automatic cleaning Automatic start function Plug a tool into the vacuum and activate the function. The vacuum will start automatically when the connected tool is started. Soft start function This feature enables a longer lifetime of the VC 20-U and VC 0-U, through a slow start of the turbine. Fully automatic power filter cleaning (every 15 sec), providing the best in class vacuum performance. Built-in supply socket Easy, versatile and durable Easy access to the filter compartment. Available in two optimal sizes VC 20-U (20 litre) and VC 0-U (0 litre). Robust trolley and wheels to tackle any jobsite. The VC 20-U and VC 0-U vacuum cleaners are equipped with a built-in electric supply socket. Electric tools <1200W can be connected to the electric supply by plugging them directly into the built-in supply socket. De-activation of filter cleaning Manually switch off the filter cleaning and reduce noise emissions. COMPLETE THE FAMILY WITH THESE ACCESSORIES DD 150-U and X-CM core bit starter kits (see ordering information on p10 for details) DD 150-U and X-CM Diamond Hand Held Anchor Kit 1* 5155 DD 150-U and X-CM Diamond Hand Held Anchor Kit 2* DD 150 and X-CM Penetration Kit 1 (52mm and 102mm) DD 150-U and X-CM Penetration Kit 2 (77mm and 122mm) *Fixed diamond ring. No X-Change module function. VC 20-U VC 0-U VC 0-U-Y (Corded/Cordless hybrid) Weight 1.5kg 15kg 16.9kg Size (L x W x H) 500 x 80 x 515 mm 595 x 80 x 515 mm 50 x 80 x 670 mm Capacity (Dust / Water) 25kg / 21L 0kg / 25L 0kg / 25L Power 1200W 1200W 1200W Power Socket Yes Yes No 5

4 Application tool selector WE VE GOT IT COVERED. A solution for every application. Tool and application table WE VE GOT IT COVERED. A solution for every application. Standard core bit lengths (mm) 150 DD EC DIAMETER DD EC-1 diamond coring tool Drilling accurate anchor and through holes (8-5mm diameter) Anchor setting with reduced noise level (renovation work in hospitals, commercial and residential buildings) The hand-held DD EC-1 is the fastest diamond drilling tool of its kind Ideal for drilling work in inhabited buildings (clean, no dust, no penetrating noise, no vibration) TOOL DD 500-CA DD 50-CA DD 200 DD 150-U DD = Optimal = Capacity FAST SIMPLE VERSATILE DD EC-1 diamond coring tool DD 120 diamond coring tool DD 150-U diamond coring tool DD 120 diamond coring tool Wet drilling of through-holes in concrete for: Pipes for sanitary, heating and air conditioning installations Water supply and waste water pipes Openings for cable trays Drilling anchor holes for: Setting large-diameter anchors and reinforcing bars Installing railings and barriers DD 150-U diamond coring tool (hand-guided or on stand) Penetrations for cables and cable trays Through-holes for plumbing, heating and ventilation pipes or ducts Large-diameter anchors and post-installed rebar Installation of hand rails, railings or barriers Hand-guided dry coring in unreinforced masonry Through-holes for plumbing, heating and ventilation pipes or ducts DD 200 diamond coring tool Gears 1 150W Gears W Gears 2200W Drilling penetrations for plumbing and heating pipes or ventilation ducts Drilling corner holes for wall sawing door and window openings Large-diameter holes, e.g. for shafts Stitch drilling, e.g. creating openings for cable trays Angular drilling, e.g. for the installation of gas pipes Blind holes (hand-held/stand based) 8-5mm/8-5mm (stand based only) mm (optimum 7-122mm) mm (optimum mm) Both 5.7kgs/8kgs Stand based 9.8kgs/10.5kgs Both 8.2kgs/21.5kgs DD 50-CA diamond coring tool DD 200 diamond coring tool POWERFUL DD 50-CA diamond coring tool DD 500-CA diamond coring tool Through-holes and penetrations Blind holes for setting anchors or post-installed rebar Corner holes for sawing Manhole openings Stitch coring for installing cable trays Large openings for drainage water pipes etc. DD 500-CA diamond coring tool Gears 2600W (stand based only) 25-00mm (optimum mm) Stand based Gears W (stand based only) mm (optimum 52-50mm) Stand based Gears W (stand based only) mm (optimum mm) Stand based Through-holes and penetrations Blind holes for setting anchors or post-installed rebar Corner holes for sawing Manhole openings Stitch coring for installing cable trays Large openings for drainage water pipes etc. Ideal for > 500mm diameter coring 00V three-phase 1.9kgs/2.2kgs 1.kgs/2.7kgs 16.6kgs/.9kgs 6 7

5 MANUFACTURER S MANUFACTURER S MANUFACTURER S Hilti diamond tile drilling WAX NOT WATER. Introducing the DD-BH AT diamond anchor tile. Hilti services INDUSTRY LEADING SERVICE OFFERING. Your daily needs are our business. Applications Bathroom accessories and furniture installation (6mm) Bathroom furniture installation (6-1) Kitchen cabinet installation Core removal solution Easy core extraction with wax refilling option (diameters >10mm). Optimised diameters 6mm, 8mm, 10mm, 12mm, 1mm, 20mm for greater versatility. Hilti Fleet Management. Cut your administrative overheads. Control your costs All inclusive repairs Fixed monthly cost Theft coverage Protect your business from hidden costs. Cut administration Streamlined processes Get the job done faster Tool upgrades Know what you have Tool inventory and labelling No water needed Fast drilling and long life Dry drilling with wax saves time and gives you a clean jobsite. Improved productivity and efficiency. Hilti Service. Anything but business as usual. 2 Years No Costs period* LIFETIME SERVICE REPAIR COST LIMIT up to 2 Years NO COSTS WARRANTY No repair costs incurred for 2 years from the date of purchase. LIFETIME SERVICE NO COSTS Dedicated starting aid for dry drilling on tiles The all-in-one tile drilling kit includes a dedicated starting aid for dry drilling on tiles. It is light and easy to use (fixation, visibility and dust collection) for precise and clean operation. Repair Cost Limit* Covers repair or replacement of defective parts, even parts subject to wear and tear! Includes free pick-up and return transport Includes Li-Ion tools, batteries and chargers LIFETIME SERVICE REPAIR COST LIMIT up to 2 Years NO COSTS WARRANTY At the end of the NO COSTS period, the cost of each repair is capped for the lifetime of the tool. PLUS paid repairs are covered for a further month NO COSTS period. REPAIR COST LIMIT MANUFACTURER S WARRANTY Diameter (mm) Cooling Wax re-filling No No Yes Yes Yes Yes Core Removal hole No No Yes Yes Yes Yes Starting Aid Yes Yes Yes Yes Yes No Connection end Hex Hex Hex Hex Hex Hex Base Materials Tiles, ceramics, natural stone (very hard materials, granite, marble) Tool Suitable for use with SFH 22-A, SFC 22-A and SFH 1-A Manufacturer s warranty LIFETIME SERVICE REPAIR COST LIMIT up to 2 Years NO COSTS WARRANTY Tools having faulty workmanship or materials, are repaired or replaced free of charge for the lifetime of the tool. 8 *Conditions apply. See general conditions and limitations at 9

6 Hilti ordering information DD-BH AT diamond anchor tiles DD 120 diamond coring tool DD-BH AT Diamond Anchor Tile for use with SFH 1-A, SFC 22-A and SFH 22-A DD-BH 6/0 AT Diamond anchor tile 6mm pack x 6mm DD-BH 8/0 AT Diamond anchor tile 8mm pack x 8mm DD-BH 10/0 AT Diamond anchor tile 1 x 10mm DD-BH 12/0 AT Diamond anchor tile 1 x 12mm DD 120 Diamond coring tool DD 120 Diamond coring tool starter kit DD 120 tool, drill stand, supply cord with PRCD and operating instructions. Supplied in a Hilti tool case DD 120 tool, drill stand, supply cord with PRCD and operating instructions. Supplied in a Hilti tool case. Plus vacuum baseplate, vacuum pump, anchor mounting kit and water collection kit DD-LR-VBP Vacuum baseplate DD-LR-VBP Vacuum baseplate in cardboard box DD-BH 1/0 AT Diamond anchor tile 1 x 1mm DD-BH 20/0 AT Diamond anchor tile 1 x 20mm DD-BH 6-10/0 AT Diamond anchor tile starter kit 2 x 6mm, 2 x 8mm & 2 x 10mm DD-BH AT All-in-one Diamond anchor tile starter kit Drill drivers Starter Kit includes; 2 x 6mm, 2 x 8mm, 2 x 10mm, starting aid, dust collector chambers and wax SFH 1-A Hammer drill driver kit SFC 22-A Compact drill driver kit SFH 22-A Hammer drill driver kit SFH 1-A tool, 2 x.ah Li-Ion batteries, Li-Ion compact charger. Supplied in Hilti tool case SFC 22-A tool, 2 x.ah Li-Ion batteries, Li-Ion fast charger. Supplied in Hilti tool case SFH 22-A tool, 2 x.ah Li-Ion batteries, Li-Ion fast charger. Supplied in Hilti tool case DD EC-1 diamond coring tool and accessories DD EC-1 Diamond coring tool DD EC-1 tool with water collector, 5m supply cord with built-in PRCD, depth gauge, Hilti spray, cleaning cloth & operating instructions. Supplied 67 in Hilti tool box DD- CR 1 Drilling stand DD-CR 1 Drilling stand in cardboard box DD 150-U diamond coring tool DD150-U Diamond coring tool DD150-U Diamond coring tool essentials kit DD 150-U and X-CM Diamond Hand Held Anchor Kit 1* DD 150-U and X-CM Diamond Hand Held Anchor Kit 2* DD 150-U and X-CM Penetration Kit 1 DD 150-U and X-CM Penetration Kit 2 DD 150-U Diamond coring tool, built-in PRCD and operating instructions. Supplied in Hilti tool case DD 150-U Diamond coring tool, built-in PRCD, drill stand, anchor mounting kit and operating instructions. Supplied in Hilti tool case DD 150-U Diamond coring tool, built-in PRCD, 16/20, 18/20, 20/20, 2/20 and soft Hilti tool bag DD 150-U Diamond coring tool, built-in PRCD, 18/20, 2/20, 28/20 and soft Hilti tool bag DD 150-U Diamond coring tool, built-in PRCD, drill stand, accessory kit, 1 x 102/0 barrel, 2 x 102 LCL rings, 1 x 52/0 barrel, 2 x 52 LCL rings, tool bag, screw driver & X-CM ring box DD 150-U Diamond coring tool, built-in PRCD, drill stand, accessory kit, 1 x 122/0 barrel, 2 x 122 LCL rings, 1 x 77/0 barrel, 2 x 77 LCL rings, tool bag, screw driver & X-CM ring box DD-ST 150-U Drill stand supplied in cardboard box 5666 DD VP-U Vacuum pump supplied in cardboard box * Fixed diamond ring. No X-Change module. Core removal, anchoring and water management accessories (for use with DD EC-1, DD 120 and DD 150-U diamond coring tools) DD VP-U Vacuum pump DD VP-U Vacuum pump in cardboard box DD REC-1 Water recycling unit DD REC-1 Water recycling unit in cardboard box 6752 DD REC-1 Water recycling unit filter REC-1 F Water recycling unit filter DD-CB 12 Core breaker 86* DD-CB 1 Core breaker 88* DD-CB 15 Core breaker 850* Core bits for use with DD EC-1 diamond coring tool DD-CB 16 Core breaker 851* DD-CB 18 Core breaker 852* DD-C 8/70 T2 Diamond core bit 6885 DD-C 22/00 T Diamond core bit 687 DD-C 10/150 T2 Diamond core bit * 6887 DD-C 2/00 T Diamond core bit 6875 DD-C 12/150 T2 Diamond core bit 6889 DD-C 25/00 T Diamond core bit 6876 DD-C 18/00 T2 Diamond core bit * 6900 DD-C 28/00 T Diamond core bit 6878 DD-C 22/00 T2 Diamond core bit * 6909 DD-C 0/00 T Diamond core bit 6880 DD-C 5/00 T2 Diamond core bit * 6920 DD-C 2/00 T Diamond core bit 6881 DD-C 1/150 T Diamond core bit 6855 DD-C 5/00 T Diamond core bit 688 DD-C 15/150 T Diamond core bit * 6859 DD-C 18/600 T Diamond core bit * DD-C 16/150 T Diamond core bit 6861 DD-C 20/600 T Diamond core bit * 0119 DD-C 18/150 T Diamond core bit 686 DD-C 22/600 T Diamond core bit * DD-C 20/150 T Diamond core bit * 6869 DD-C 2/600 T Diamond core bit DD-C 16/00 T Diamond core bit 6862 DD-C 28/600 T Diamond core bit DD-C 18/00 T Diamond core bit 686 DD-C 0/600 T Diamond core bit * 0120 DD-C 20/00 T Diamond core bit 6870 DD-C 5/600 T Diamond core bit * * Subject to lead time DD-C T2 Diamond core bit: For concrete with softer aggregates and low-medium reinforcing content. DD-C T Diamond core bit: For concrete with mediumhard aggregates and medium reinforcing content. DD-CB 20 Core breaker 855* DD-CB 22 Core breaker 857* DD-CB 2 Core breaker 859* DD-CB 25 Core breaker 860* DD-CB 28 Core breaker 862* DD-CB 0 Core breaker 86* DD-CB 2 Core breaker 865* DD-CB 5 Core breaker 868* DD M12 S Anchor Accessory kit (DD 120 only) All in one system for anchor mounting DD M12 L Anchor Accessory kit (DD 150-U only) All in one system for anchor mounting Jack screw (DD120) 629 Jack screw M12 (DD150-U only) Clamping Nut (DD120) 77 Quick-locking nut (DD150-U) 2518 DD-WMK-BI water collection system kit (for DD 120/150-U) Hand-held water collection system (DD 150-U only) Water collector holder, water dam - small and medium, slurry hose (m) and vacuum connection piece. Supplied in Hilti tool case

7 Hilti ordering information Core removal, anchoring and water management accessories (for use with DD EC-1, DD 120 and DD 150-U diamond coring tools) X-Change module barrel components Connecting piece Slury hose m 7298 Water collector holder Water dam (small 8-87mm) 2220 Water dam (medium mm) DWP 10 Water supply unit mm Barrel Component (diameter 52mm-162mm) for use with DD 120, DD 10 and DD 150-U Diamond Coring Tools DD-BI 52/20 X-Change barrel DD-BI 102/20 X-Change barrel DD-BI 67/20 X-Change barrel DD-BI 112/20 X-Change barrel DD-BI 77/20 X-Change barrel DD-BI 122/20 X-Change barrel DD-BI 82/20 X-Change barrel DD-BI 152/20 X-Change barrel DD-BI 87/20 X-Change barrel DD-BI 162/20 X-Change barrel DD-BI 92/20 X-Change barrel Core bits ( for use with DD 120 and DD 150-U diamond coring tools) Fixed Diamond Ring 20mm long (diameter 12-7mm) DD-BI 12/20 LCL Diamond core bit DD-BI 28/20 LCL Diamond core bit DD-BI 1/20 LCL Diamond core bit DD-BI 0/20 LCL Diamond core bit DD-BI 16/20 LCL Diamond core bit DD-BI 2/20 LCL Diamond core bit DD-BI 18/20 LCL Diamond core bit DD BI 5/20 LCL Diamond core bit DD-BI 20/20 LCL Diamond core bit DD BI 7/20 LCL Diamond core bit mm Barrel Component (diameter 52mm-162mm) for use with DD 120, DD 10 and DD 150-U Diamond Coring Tools DD-BI 52/0 X-Change barrel DD-BI 102/0 X-Change barrel DD-BI 67/0 X-Change barrel DD-BI 112/0 X-Change barrel DD-BI 77/0 X-Change barrel DD-BI 122/0 X-Change barrel DD-BI 82/0 X-Change barrel DD-BI 152/0 X-Change barrel DD-BI 87/0 X-Change barrel DD-BI 162/0 X-Change barrel DD-BI 92/0 X-Change barrel DD-BI 22/20 LCL Diamond core bit DD BI 0/20 LCL Diamond core bit DD-BI 2/20 LCL Diamond core bit DD BI 2/20 LCL Diamond core bit X-Change module ring component (diameter 52mm-162mm) DD-BI 25/20 LCL Diamond core bit DD BI 7/20 LCL Diamond core bit Fixed Diamond Ring 0mm long (diameter 12-7mm) DD B 5/0+ LCL Diamond core bit DD B 2/0+ LCL Diamond core bit DD B 7/0+ LCL Diamond core bit DD B 7/0+ LCL Diamond core bit DD B 0/0+ LCL Diamond core bit Light Concrete Life (LCL) Module Rings for use with DD 120, DD 10 and DD 150-U Diamond Coring Tools DD-X 52 LCL X-Change module DD-X 92 LCL X-Change module DD-X 67 LCL X-Change module DD-X 102 LCL X-Change module DD-X 77 LCL X-Change module DD-X 112 LCL X-Change module DD-X 82 LCL X-Change module DD-X 122 LCL X-Change module X-Change modules X-CM Single Pack (1 barrel + 1 ring) X-CM Pack (2 barrel + 2 ring) X-CM Pack ( barrel + ring) 20mm Light Concrete Life (LCL) Starter Packs for use with DD 120, DD 10 and DD 150-U Diamond Coring Tools DD-BI 52/20 LCL X- Change module DD-BI 67/20 LCL X- Change module DD-BI 77/20 LCL X- Change module DD-BI 82/20 LCL X- Change module DD-BI 87/20 LCL X- Change module DD-X 87 LCL X-Change module DD-X 152 LCL X-Change module Light Masonry (LM) Module Rings for use with DD 120, DD 10 and DD 150-U Diamond Coring Tools DD-X 52 LM X-Change module DD-X 102 LM X-Change module DD-X 67 LM X-Change module DD-X 112 LM X-Change module DD-X 77 LM X-Change module DD-X 122 LM X-Change module DD-X 82 LM X-Change module DD-X 152 LM X-Change module DD-X 87 LM X-Change module DD-X 162 LM X-Change module DD-X 92 LM X-Change module DD-BI 92/20 LCL X- Change module DD-BI 102/20 LCL X- Change module X-Change module system accessories DD-BI 112/20 LCL X- Change module DD-BI 122/20 LCL X- Change module DD-BI 152/20 LCL X- Change module DD-BI 162/20 LCL X- Change module mm Light Concrete Life (LCL) Starter Packs for use with DD 120, DD10 and DD 150-U Diamond Coring Tools DD-BI 52/0 LCL X- Change module DD-BI 67/0 LCL X- Change module DD-BI 77/0 LCL X- Change module DD-BI 82/0 LCL X- Change module DD-BI 87/0 LCL X- Change module DD-BI 92/0 LCL X- Change module DD-BI 102/0 LCL X- Change module DD-BI 112/0 LCL X- Change module DD-BI 122/0 LCL X- Change module DD-BI 152/0 LCL X- Change module DD-X-CM-BOX Bit box S-SD SL Screw driver Starting Aid DD-SA 52* Starting Aid DD-SA 67* Starting Aid DD-SA 77* Starting Aid DD-SA 82* Starting Aid DD-SA 87* Starting Aid DD-SA 92* Starting Aid DD-SA 102* Starting Aid DD-SA 112* Starting Aid DD-SA 122* Starting Aid DD-SA 152* Starting Aid DD-SA 162* * For use with dry coring DD-BI 162/0 LCL X- Change module

8 Hilti ordering information DD 200 diamond coring tool DD 200 Diamond coring tool drive unit with BL chuck DD 200 Diamond coring tool starter kit DD 50-CA diamond coring tool DD 200 tool only. Supplied in cardboard box 289 DD 200 tool, drill stand and anchor accessory kit (M16). Supplied in cardboard box 5892 Core bits Heavy Concrete Speed (HCS) for use with DD 200, DD 50-CA, DD 500-CA Diamond Coring Tools DD-B 52/0 HCS Diamond core bit DD-B 162/0 HCS Diamond core bit DD-B 57/0 HCS Diamond core bit* DD-B 182/0 HCS Diamond core bit DD-B 62/0 HCS Diamond core bit DD-B 202/0 HCS Diamond core bit DD-B 67/0 HCS Diamond core bit* DD-B 225/0 HCS Diamond core bit* 5882 Diamond coring tool DD 50-CA DD 50-CA tool only. Supplied in cardboard box DD 50-CA Diamond coring tool starter kit DD 50-CA Diamond coring tool and water management starter kit DD 50-CA tool, DD-HD 0 drill stand, anchor accessory kit (M16). Supplied in cardboard box DD 50-CA tool, DD-HD 0 drill stand, anchor accessory kit (M16) and BL water collection system. Supplied in cardboard box DD-B 72/0 HCS Diamond core bit* DD-B 250/0 HCS Diamond core bit* 5882 DD-B 77/0 HCS Diamond core bit * Subject to lead time Complete the diamond coring system DD 500-CA diamond coring tool Diamond coring tool DD 500-CA* DD 500-CA tool only. Supplied in cardboard box * Subject to lead time Anchoring and water management accessories* for use with DD 200, DD 50-CA, DD 500-CA Diamond Coring Tools DD-HD 0 Drilling stand 055 DD-HD0-VBP Vacuum baseplate 0558 DD VP-U Vacuum pump DD-HD0-SP Spacer For core bits >00mm (increments of 150mm) 0559 DD-WMK-BL Water collection system DD M16 Anchor accessory kit 090 Jack screw M Water collector holder (to suit DD-HD 0) 0556 Water dam (medium 25mm-162mm) DD-SW-77/87-M Sealing ring DD-SW-102/117-M Sealing ring DD-SW-122/12-M Sealing ring 2072 DD-SW-158/162-M Sealing ring Water dam (medium/ large 92mm-250mm) 222 DD-SW-92/102-L Sealing ring 207 DD-SW-122/12-L Sealing ring 2075 DD-SW-158/162-L Sealing ring 2077 DD-SW-225-L Sealing ring 2071 Quick-locking nut 2518 * Contact Hilti for the complete diameter range 5 Tools VC 0-U Universal vacuum cleaner VC 20-U Universal vacuum cleaner DSH 900 Hand-held petrol saw DSH 700 Hand-held petrol saw Accessories VC 0-U tool, suction hose, universal filter and dust bag. Supplied in cardboard box VC 20-U tool, suction hose, universal filter and dust bag. Supplied in cardboard box 16" Petrol saw, universal blade and consumable maintenance kit kit. Supplied in cardboard box 1" Petrol saw, universal blade and consumable maintenance kit. Supplied in cardboard box VC 0-U Push bar VC 20-U Push bar 2021 VC 20/0 Adapter plate To position Hilti tool cases on top of vacuum Suction hose 6mm x 5m Anti-static suction hose 6mm x 5m Big wheel set (VC0-U) VC 20-U Plastic bag (5 pack) 2085 VC0-U Plastic bag (5 pack) VC 20/0 Accessory set 2021 VC 20/0 Dry filter Suitable for dry concrete dust and wood dust VC 20/0 Universal filter Suitable for wet and dry applications VC 20/0 PTFE Performance filter Suitable for heavy duty concrete dust and wet applications 6058 VC 20/0 HEPA filter Suitable for fine dust particles and wet applications Replacement Starter Ropes (Five pack) 1220 Replacement poly-v belt for DSH 700/ Replacement Self-tensioning belt 700/1 For DSH 700 with no self-tension window Replacement poly-v belt for DSH 900/ Core bits Heavy Concrete Speed (HCS) for use with DD 200, DD 50-CA, DD 500-CA Diamond Coring Tools DD-B 25/0 H2S Diamond core bit* DD-B 82/0 HCS Diamond core bit Precisely positioned diamonds provide a constant high drilling performance on reinforcement Replacement Self-tensioning belt 900/16 For DSH 900 with no self-tension window DC-D Cutting disc 50/25 universal performance 2578 DC-D Cutting disc 00/25 universal performance DC-D Cutting disc 50/25 concrete (reinforced) special performance DD-B 28/0 H2S Diamond core bit DD-B 87/0 HCS Diamond core bit* DC-D Cutting disc 00/25 concrete (reinforced) special performance DD-B 0/0 H2S Diamond core bit DD-B 92/0 HCS Diamond core bit* 5881 DC-D Cutting disc 50/.2/25. asphalt, bitumen 6060 DD-B 2/0 H2S Diamond core bit DD-B 102/0 HCS Diamond core bit 5881 DD-B 5/0 HCS Diamond core bit DD-B 112/0 HCS Diamond core bit DD-B 7/0 HCS Diamond core bit DD-B 122/0 HCS Diamond core bit DD-B 0/0 HCS Diamond core bit* DD-B 12/0 HCS Diamond core bit* DD-B 2/0 HCS Diamond core bit 5880 DD-B 12/0 HCS Diamond core bit* DD-B 7/0 HCS Diamond core bit* 5880 DD-B 152/0 HCS Diamond core bit Specially Designed for Powerful Applications DC-D Cutting disc 00/.2/25. asphalt, bitumen 6061 DD-BL-ET 00mm Core bit extension Minimum diameter 62mm (DD DD 150-U) 0590 DD-BI-ET 00mm Core bit extension Minimum diameter 55mm (DD 200-DD 500-CA) Adapter BS/BL Core bit adaptor 1¼" BS to BL Adapter BS/BI Core bit adaptor 1¼" BS to BI For using Hilti BL core bits on 1¼" BS competitor chucks For using Hilti BI core bits on 1¼" BS competitor chucks

9 Contacting Hilti HOW TO GET IN TOUCH. There are a number of ways to contact Hilti. Customer Service Customer Service representatives are available Monday to Friday from 7:0am to 5:00pm. Our professionally trained team can help you with product advice, orders and deliveries, as well as organising on-site product demonstrations. Call: Fax: serviceaustralia@hilti.com Hilti Centres With stores located nationally, Hilti Centres are much more than display or sales points for Hilti products. At a Hilti Centre, you can receive professional advice on products and applications. You can also have hands-on demonstrations of Hilti products. Take a look at our list of Hilti Centres for a location near you. Visit: Hilti Online 7 days a week, 2 hours a day. Use the website at your own convenience during and after office hours, with quick access to product information and pricing. Register to order online, review your order history, see your tool list and more. Take advantage of our free delivery for online ordering today! Visit: Account Managers Professionally trained Account Managers are readily available nationwide, to visit your place of work, where and when you want. By arranging a visit to you, they can help evaluate your job requirements and suggest ways to increase your productivity and profitability. Call: Sydney Lidcombe 5 Parramatta Road, Lidcombe NSW 211 Melbourne Normanby Road, South Melbourne VIC 205 Townsville Unit 8/26 Woolcock Street, Currajong QLD 812 Mon Fri 7.0am.0pm Perth 150 Abernethy Road Belmont WA 610 Sydney Annandale 25a Parramatta Road, Annandale NSW 208 Mon Fri 7.00am.00pm Brisbane 718 Kingsford Smith Drive, Hamilton QLD 007 Cairns 29 Hannam Street, Cairns QLD 870 Mon Fri 7.0am.0pm Hobart 56A Hopkins Street, Moonah TAS 7009 Mon Fri 7.0am.0pm Newcastle Orlando Road, Lambton NSW 2299 Mon Fri 7.00am.00pm Gold Coast Unit /5 Nind Street, Southport QLD 215 Mon Fri 7.00am.00pm Adelaide 52 Richmond Road, Keswick SA 505 Darwin 2 Benison Road, Winnellie NT 0820 Mon Fri 7.0am.0pm Hilti. Outperform. Outlast. Hilti (Aust.) Pty Ltd I Level 5, 1G Homebush Bay Drive I Rhodes I NSW 218 I T I F I