AMSCO Knock-Down Doors - Table of Contents
|
|
|
- Caitlin Reynolds
- 7 years ago
- Views:
Transcription
1 AMSCO Knock-Down Doors - Table of Contents AMSCO Aluminum Threshold and Weatherstrip 13.1 Heavy Duty 8 Slide Bolt Installation Instructions 13.2 Door Closer Heavy Duty Type 13.3 Fire Exit Device Non-Handed by Key in Knob Outside 13.4 Gov. Series 86-4 Mortise Lockset 13.5 Standard Duty Cylindrical Lockset 13.6 Full Mortise Hinge 4 1/2 x 4 1/2 (.134) Gauge 13.7 Door Glazing Instruction 13.8 Glazed Doors Glass Sizes 13.9 Door Glazing Instructions Hardware from this section may not be compatible with other product lines by Dominion Building Products. Please check with your rep.
2 AMSCO Aluminum Threshold and Weatherstrip 4/10/01 ALUMINUM and VINYL 194-A WEATHERSTRIP 154-AV ACTS AS AN EFFECTIVE RAINDRIP AND DOOR BOTTOM SEAL. 154-AV DOOR SWEEP ALUMINUM and VINYL USE INSWING USE OUTSWING 1/2 3 3/8 37A THRESHOLD ALUMINUM Page 13.1
3 Heavy Duty 8 Slide Bolt Installation Instructions Top Strike End Plug Top Channel Knob End Plug Screw Attaching Screws Base and Guide TOP BOLT 8 Top bolt, steel cadmium plated End Plug Top Channel Knob End Plug Screw Floor Strike Attaching Screws Base and Guide BOTTOM BOLT 8 Bottom bolt, steel cadmium plated Page 13.2
4 Door Closer Heavy Duty Type UNIVERSAL NON-HANDED, RACK & PINION CONSTRUCTION. CLOSING AND LATCHING SPEED CONTROLLED BY TWO SEPARATE NEEDLE VALVES. CAN BE INSTALLED REGULAR ARM OR PARALLEL ARM. SILVER ALUMINUM LAQUER FINISH. THRU-BOLTS REQUIRED AND FURNISHED. Page 13.3
5 Fire Exit Device Non-Handed OUTSIDE TRIM OPTIONS Cylinder locks or unlocks knob or lever. When unlocked, knob or lever retracts latchbolt. LEVER US26D KNOB US26D Touch bar finish is baked enamel -- aluminum. SPECIFICATIONS: Chassis Mount Construction: Operating mechanism assembled on single chassis which mounts on door; removal of case cover permits inspection/maintenance. Easy Dogging: Half-turn of hex-dogging key locks flat bar in the depressed position; latchbolts and upper/lower latchbolts/deadbolts held retracted. Door Thickness: 1-3/4 when used with operating trim. (372) ENTRANCE and EXIT Outside by key and knob Door Width: Flat bar length available for two standard door widths; doors 30 >36 wide; doors 36 >42 wide; flat bar easily field cut to specific width. Available for doors 42 >48 wide on special order. Material: Base and flat bar, steel; covers, high-density rust-resistant alloy. Minimum Stile Width: 4-1/2 UL Listed: Panic Hardware. Reversible Design: Hand can be easily reversed in the field. Page 13.4
6 Gov. Series 86-4 Mortise Lockset Dormitory Lock Latch bolt by knobs/levers except when outside knob/lever is locked by projecting dead bolt. Key outside retracts deadbolt and unlocks outside knob/lever. Rotating inside knob/lever retracts both locks ENTRY OR OFFICE DOOR LOCK 3/4 ANTI-FRICTION LATCH BOLT 1 DEADBOLT Latch bolt operated by knobs from either side. Dead bolt operated by key from outside and thumb turn inside. Grade I Lockset Optional trim styles shown Page 13.5
7 Standard Duty Cylindrical Lockset STANDARD DUTY CYLINDRICAL LOCKSET Key outside -- turn button inside. Deadlocking latch by knob both sides. Inside knob always free to retract latch. FEATURES: All solid zinc dichromated steel cylindrical housing Finish: US32D Panic resistant inside knob always free to open Latch bolt: Deadlocking -- full 1/2 inch projection Nickel plated brass key Reversible for right or left hand doors For doors with cylindrical lock projection Backset: 2 3/4 inches Latch Front: 1 1/8 x 2 1/4 inches Strike: ANSI universal type /4 x 4 7/8 inches Packing: One set per box Solid brass 5 pin tumbler cylinder Page 13.6
8 Full Mortise Hinge 4 1/2 x 4 1/2 (.134) Gauge FULL MORTISE 4 1/2 x 4 1/2 (.134) GAUGE, STEEL HINGES. FIVE KNUCKLE, BUTTON TIP, FURNISHED (3) PER BOX. FINISHES: DULL CHROME, OR GRAY PRIME PAINT. AVAILABLE WITH NON-REMOVEABLE PINS, SUFFIX (N.R.P.) Page 13.7
9 Door Glazing Instruction PERIMETER FRAME GLASS STOPS APPLY PUTTY STEP #1 REMOVE GLASS TOPS (ONE SIDE) BY PUSHING BEAD IN AND UP WITH THUMBS, BOTTOM BEAD FIRST. STEP #2 MEASURE GLASS SIZE REQUIRED FROM SILL TO SILL. SEE DETAIL A. CUT SIZE OF GLASS 1/4 SMALLER THAN OPENING SIZE. STEP #3 APPLY PUTTY ON SILL AND AGAINST OPPOSITE GLAZING BEAD. AVOID PUTTY IN GROOVE FOR BEAD TO BE REPLACED. PUSH IN AND OUT TO REMOVE, IN AND DOWN TO INSTALL GLASS SILL PUTTY GLAZING BEAD PERIMETER FRAME DETAIL A MUNTIN BAR SILL MUNTIN BAR FOR (G2) STYLE DOOR COVER BASE WHEN MUNTIN BAR IS USED TO DIVIDE THE GLASS LITE, FOLLOW ABOVE INSTRUCTIONS EXCEPT: INSTALL LOWER GLASS FIRST, SLIDE MUNTIN BAR DOWN ON TOP EDGE OF GLASS, INSTALL TOP GLASS LITE AND SNAP IN GLAZING BEADS. END PLUG NOTE: 1/4 PLATE OR WIRE GLASS IS RECOMMENDED FOR GLAZED DOORS. Page 13.8
10 Glazed Door Glass Sizes /32 A 6 5/32 6 5/32 A 6 5/32 A 6 5/32 6 5/32 B 6 5/32 B B EQUAL B EQUAL G G2 LV G STYLE DOORS DIMENSION A DIMENSION B DOOR CUTOUT GLASS EXPOSED DOOR CUTOUT GLASS EXPOSED WIDTH SIZE SIZE GLASS HEIGHT SIZE SIZE GLASS /2 16 3/ /2 25 3/ /2 18 3/ /2 29 3/ /2 22 3/ /2 31 3/ /2 26 3/ /2 41 3/ /2 28 3/ x 10 VISION LITE /2 30 3/ /2 34 3/4 34 G2 STYLE DOORS DIMENSION A DIMENSION B DOOR CUTOUT GLASS EXPOSED DOOR CUTOUT GLASS EXPOSED WIDTH SIZE SIZE GLASS HEIGHT SIZE SIZE GLASS /2 16 3/ /2 (2) 12 9/ /2 18 3/ /2 (2) 14 9/ /2 22 3/ /2 (2) 15 9/ /2 26 3/ /2 (2) 20 9/ /2 28 3/4 28 NOTE: /2 30 3/4 30 ALL DIMENSIONS FOR CUTOUTS ALL DOORS 11 1/4 x 11 1/4 10 1/2 x 10 1/2 9 3/4 x 9 3/4 CENTER LINE OF VISION LITE 64 1/4 FROM BOTTOM OF DOOR /2 34 3/4 34 MADE FROM HIGH SIDE OF BEVEL. LV STYLE DOORS DIMENSION A DIMENSION B DOOR CUTOUT GLASS EXPOSED DOOR CUTOUT GLASS EXPOSED WIDTH SIZE SIZE GLASS HEIGHT SIZE SIZE GLASS 9 1/2 8 3/4 8 ALL DOORS 63 1/2 62 3/4 62 ALL DOORS Page 13.9
11 Door Glazing Instructions Perimeter Frame NOTE: 1/4 Tempered plate or wire glass is recommended for glazed doors. Glass Stops Apply Putty STEP #1 Remove glass stops (one side) by pushing bead in and up with thumbs, bottom bead first. STEP #2 Measure glass size req d from sill to sill, see detail (A), cut size of glass 1/4 smaller than opening size STEP #3 Apply putty on sill and against opposite glazing bead. Avoid putty in grove for bead to be replaced. Muntin Bar for G2 Door Push in and out to remove, in and down to install Putty Glazing Bead When muntin bar is used to divide the glass lite, follow above instruction except: install lower glass first, slide muntin bar down on top edge of glass, install top glass lite Perimeter Frame Detail A Muntin Bar Cover Sill Base End Plug Page 13.10
SECTION 6. Glass Storefront Doors:
SECTION 6 Glass Storefront Doors: Table of Contents 3070 Storefront Door System Description & Dimensions 6070 Storefront Door System Description & Dimensions Door Leaf Detail Optional 10 Bottom Rail Detail
Basic Technical Fundamentals of Builders Hardware Mortise, Bored and Auxiliary Locks
Mortise, Bored and Auxiliary Locks Copyright 2002, 2009, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents Page SARGENT History...................................................
Basic Technical Fundamentals of Builders Hardware
Basic Technical Fundamentals of Builders Hardware Mortise Locks Bored Locks Auxiliary Locks Inside Cover (blank) Table of Contents SARGENT History...4 Basic Name of Products...5, 6 Doors (A Brief Review)...7
Door Hardware Lock Specifications
Door Hardware Lock Specifications Directory Lock Type Page Exterior Mortise Lock Specifications... 2 2.5 Backset Mortise Locks Specification... 3 2.5 Backset Mortise Lock Functions (6301, 6310, 6315, 6318,
Combination & Screen Doors
Combination & Screen Doors www.bbwood.com WOOD SCREEN DOORS Removable Screens (RS) SPECIFICATIONS: Stiles and Top Rail 2-9/16 Cross Rails Bottom Rail Vertical Mull 7/8 #206 #201 58-RS 764-RS V52-RS 2 2
An ASSA ABLOY Group brand. 4800LN Series. Interconnected Locks
An ASSA ABLOY Group brand 4800LN Series Interconnected Locks performance meets style introduction The Yale 4800LN series interconnected locksets combine our key-in-lever locksets with the added safety
Wood Sound Retardant Door Hardware Information Bulletin
overly overly 574 West Otterman Street Greensburg, PA 15601 Toll Free: (800) 979-7300 Local: (724) 834-7300 Fax: (724) 830-2871 Email: overly@overly.com DOOR COMPANY Wood Sound Retardant Door Hardware
n Three 4 x 4 butt hinges per door - prevents wracking and assures smooth positive operation n Heavy duty 16 gauge steel frame
Weather Fin and bulb help keep bad weather outside and good air inside Windows: n Many light kits are available 1-LU 4 X 48 1-LE 16 X 16 1-LA 20 X 24 1-LI 20 X 24 1-B 22 X 36 1-LW 16 X 16 W/GRID 9-LB 22
Key in Knob & Key in Lever
Key in Knob & Key in Lever We take the worry out of protecting what s valuable to you. Lockwood: no worries www.lockweb.com.au Contents 530 Series Key in Knob & Key in Lever Door Furniture Locksets 930/950
HMMA 830 HARDWARE SELECTION FOR HOLLOW METAL DOORS AND FRAMES HOLLOW METAL MANUAL -02 NAAMM STANDARD METAL DOORS & FRAMES NAAMM 01 NAAMM 01
HOLLOW METAL MANUAL NAAMM STANDARD HMMA 830-02 METAL S & FRAMES 8d NAAMM 01 02 HARDWARE SELECTION FOR HOLLOW METAL S AND FRAMES NAAMM 01 02 8d METAL S & FRAMES A Division of HOLLOW METAL MANUFACTURERS
Dor-O-Matic Exit Devices
Dor-O-Matic Exit Devices THE FALCON DIFFERENCE S A F E T Y, S E C U R I T Y A N D U N C O M P R O M I S I N G V A L U E At Falcon, we know that every product you sell not only has to meet local building
Volume 10. 08 71 00 Door hardware
Volume 0 08 7 00 Door hardware Proudly Producing Buy American Product in Leola, PA it's reputation doing what the competition said can't be done. For more than 25 Years PDQ has offered its customers an
Decorative Lever Designs
Decorative Lever Designs 3 & C 4 & K 12 14 & D 15 & A 16 & B 17 50 51 52 53 54 55 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 2 www.stanleysecuritysolutions.com
HARDWARE LOCATIONS FOR HOLLOW METAL DOORS AND FRAMES
HOLLOW METAL MANUAL NAAMM STANDARD HMMA 831-11 8d NAAMM HMMA 831-11 METAL DOORS & FRAMES HARDWARE LOCATIONS FOR HOLLOW METAL DOORS AND FRAMES 8d NAAMM HMMA 831-11 METAL DOORS & FRAMES A Division of HOLLOW
DIVISION 08 70 00 HARDWARE FORMAT 1. Technical specifications content and numbering system shall be based on 2004 CSI MasterFormat.
FORMAT 1. Technical specifications content and numbering system shall be based on 2004 CSI MasterFormat. BASIS OF DESIGN 1. APSU design standards shall not replace fully developed, project and market specific
Andersen Clad Inswing Entry Doors (2001 to Present)
Andersen Clad Inswing Entry Doors (2001 to Present) What s in This Section Clad Inswing Entry Doors Page 3 Part Illustrations 3 Parts Illustration - Single Door 3 Parts Illustration - Double Door 4 Parts
Narrow stile lock 1314
3 2 4 6 6 1 3 2 4 4 5 3 2 4 3 5.... ( (. ). ) 11 12 5 3 5 4 8 1 6 20 8.5 6.5 19 Backset 15 3 5 2 1 5 2 5 5 0 8 9 2 8 1 1 21-1mm 12 8 24 1 6 8 1 ( 9 2 5 ) ) ). ) Narrow stile lock 1314 CE EN 12209 2 4 5
PERFORMANCE TEST REPORT. Rendered to: GLASSCRAFT DOOR COMPANY
PERFORMANCE TEST REPORT Rendered to: GLASSCRAFT DOOR COMPANY SERIES/MODEL: Buffalo Forge Steel Doors / Round Top Single PRODUCT TYPE: In-swing Round Top Single Door RH-4 Title Uniform Load Deflection Test
CLEAR-DIVISIONS VARIOFOLD
CLEAR-DIVISIONS VARIOFOLD Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS VARIOFOLD moveable The yellow highlighted areas in the
1000 Series Knob Pushbutton Locks
1000 Series Knob Pushbutton Locks This series is ideal for limiting access in high-traffic areas. Two access control functions are available in addition to standard combination access control: Key Override:
Sliding Door Locks & Hardware. 5 c
5 Sliding Door Locks & Hardware 5 c 3 4 6 8 9 Sliding Door Lever Lock Sliding Lever Lock Features Ordering String Sliding Lever Lock Series SLL Functions Trim Sets Specifications 2016 02 2 FSB North America
Mechanical Digital DX Locks
ASSA ABLOY, the global leader in door opening solutions Contents Mechanical Digital DX Locks Overview 1 002 Digital DX Deadlatch 2 530 Digital DX Entrance Set 3 3572 Digital DX Mortice Locksets 4 3582,
Panic Exit Devices. We take the worry out of protecting what s valuable to you. Lockwood: no worries. www.lockweb.com.au
Panic Exit Devices We take the worry out of protecting what s valuable to you. Lockwood: no worries www.lockweb.com.au Contents 9000/9100 Series 9300/9400 Series 9500/9600 Series 9000/9100 Series Rim Type
Auxiliary hardware & general information. Exit devices
Auxiliary hardware & general information Exit devices Introduction Since pioneering the first exit device in 1908, Von Duprin life safety products have provided unparalleled quality, performance and flexibility
PRODUCT INTRODUCTION PRECISION HARDWARE
PRODUCT INTRODUCTION PRECISION HARDWARE INTRODUCTION INTRODUCTION Originally located in southeastern Michigan, Precision Hardware has been manufacturing panic and fire exit hardware for over a half century.
BASIC FIRE DOOR REQUIREMENTS TECHNICAL DATA SHEET NO. 401
BASIC FIRE DOOR REQUIREMENTS SHEET NO. 401 Fire door openings are classified by their locations in the building. The location determines the length of exposure protection required, based on the potential
Premier & Deluxe 3-Season Room Sliding Glass Door
DTSSGD-11 Premier & Deluxe 3-Season Room Sliding Glass Door Installation Instructions Screen Door Seal Left Side Track Top Track Assembly Right Side Track Right Side Trim Sliding Glass Door Sliding Screen
CLEAR-DIVISIONS CENTERFOLD
CLEAR-DIVISIONS CENTERFOLD Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS CENTERFOLD moveable The yellow highlighted areas in
Cabinet Locks. Benefits:
Cabinet Locks Medeco high security cabinet locks are specifically designed for drawer or cabinet door applications where a conventional utility cam lock may not be suitable. Cabinet locks utilize heavy-duty
Simplex 1000 Series. All Simplex Controls are less I.C. core. 1000 Series packed with both ASA and T strike.
Kaba Mechanical Lock Price Book, May 1, 2015 Simplex 1000 Series All Simplex Controls are less I.C. core. 1000 Series packed with both ASA and T strike. KNOBS 26D 05 03 1011 Standard Access Control 450.50
CLEAR-DIVISIONS APERTO
CLEAR-DIVISIONS Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS moveable glass wall system. The yellow highlighted areas in the
Basic Fire Door Requirements
TECHNICAL DATA SERIES S D I 118-01 Basic Fire Door Requirements 2001 Steel Door Institute STEEL DOOR INSTITUTE 30200 DETROIT ROAD - CLEVELAND, OHIO 44145 Technical Data Series SDI 118-2001 Basic Fire Door
SIMPLEX UNICAN LOCKS CHANGING THE CODE / COMBINATION 900 Series 1000 Series L1000 Series LP1000 Series EE1000 Series 2000 Series 2015 Series
SIMPLEX UNICAN LOCKS CHANGING THE CODE / COMBINATION 900 Series 1000 Series L1000 Series LP1000 Series EE1000 Series 2000 Series 2015 Series 2400/2500 Series 3000 Series 3100 Series Simplex 5000 Series
MA-Series. Service manual
MA-Series Service manual Contents 4 Introduction 5 Lock assembly drawing index 8 Lock Assemblies 9 MA101 - Passage or Closet Latch 10 MA161 - Exit or Communicating Lock 11 MA301 - Privacy, Bedroom/Bath
Exit Devices TABLE OF CONTENTS
Exit Devices TABLE OF CONTENTS A Accessories, 4500 Series Grade 1 Alarm Kit... 15 Alarm Kit Latchbolt Monitor Switch... 17 Alarm Kit Tamper Switch... 18 Bottom Latch Assembly... 13 Cylinder Dogging Conversion
WHI 90-Minute Rated Veneered Door Frame Installation Instructions
No. 940-03-10 INSTALLATION INSTRUCTIONS 90 MINUTE RATED VENEERED DOOR FRAME DOOR REQUIREMENTS: Consult the door manufacturer to make sure that the doors are qualified for the hardware to be installed,
WINDOW REPAIR MANUAL & REFERENCE GUIDE
WINDOW REPAIR MANUAL & REFERENCE GUIDE TABLE OF CONTENTS DOUBLE HUNG & SINGLE HUNG PARTS 4-5 CASEMENT PARTS 6 SCREEN PARTS 7-8 HOW TO REMOVE TILT-IN SASH 9 HOW TO REMOVE A BALANCE 10 HOW TO INSTALL BALANCE
Lock Function Chart Page 1 of 7
Lock Function Chart Page 1 of 7 Passage 10 Latchbolt retracted by lever from either F01 side at all times. Passage 10 Latchbolt operated by lever from either F75 2500; 3400; 3500; 3600 side at all times.
HMMA 810 HOLLOW METAL DOORS HOLLOW METAL MANUAL -87 NAAMM STANDARD FOURTH EDITION METAL DOORS & FRAMES NAAMM 2 NAAMM 2 METAL DOORS & FRAMES
HOLLOW METAL MANUAL NAAMM STANDARD HMMA 810-87 8d METAL DOORS & FRAMES NAAMM 2 87 HOLLOW METAL HOLLOW METAL DOORS FOURTH EDITION NAAMM 2 87 8d METAL DOORS & FRAMES A Division of NATIONAL ASSOCIATION OF
ABLOY EXIT. Functional and technical descriptions Single and double leaf doors. An ASSA ABLOY Group brand
SSFN 014/2 2 ABLOY EXIT Functional and technical descriptions Single and double leaf doors An ASSA ABLOY Group brand ABLOY EXIT - EXIT PRODUCTS It is time to take the exit safety standards to a new level.
Fabrication Illustration Part No. Description Door Frame. P092 Mortised Butt Hinge P092D P092F (includes P2092 $ 48 $ 21 frame/door reinforcing)
Custom Blank Entrances - Applied Hardware & Preps - Tubelite Standard Hardware Butt Hinges Pivots C2 Page 1 P092 Mortised Butt Hinge P092D P092F (includes P2092 $ 48 $ 21 frame/door reinforcing) P795S
HARDWARE STANLEY ARCHITECTURAL HARDWARE
HARDWARE STANLEY ARCHITECTURAL HARDWARE STANLEY ARCHITECTURAL HARDWARE TABLE OF CONTENTS Page Company history...2 Wardrobe pivots...3, 4 Cabinet hinges... Cabinet pulls..., 6 Cabinet knobs...6 Cabinet
quality door and window systems for metal buildings
quality door and window systems for metal buildings knock-down door systems Features and Benefits: Galvanized Doors and Frames Insulated Door Cores Textured Steel Door Faces Completely Reversible (non-handed
ABLOY EXIT MECHANICAL LOCK CASES Technical descriptions
ABLOY EXIT MECHANICAL LOCK CASES Technical descriptions CONTENTS ABLOY LE180..3 ABLOY LE184..4 ABLOY LE185...5 ABLOY LE181..6 ABLOY LE183..7 ABLOY LE186..8 ABLOY LE310..9 ABLOY LE314 10 ABLOY LE315 11
DOORS HOLLOW METAL MANUAL NAAMM STANDARD NAAMM HMMA 810-09 METAL DOORS & FRAMES METAL. A Division of
HOLLOW METAL MANUAL NAAMM STANDARD HMMA 810-09 8d NAAMM HMMA 810-09 METAL DOORS & FRAMES HOLLOW METAL DOORS 8d NAAMM HMMA 810-09 METAL DOORS & FRAMES A Division of HOLLOW METAL MANUFACTURERS A S S O C
Flexivent Windows (1952 to 1979)
Flexivent Windows (1952 to 1979) Parts Catalog Main Menu Section TOC Search What s in This Section Standard Windows................................................ Page 3 Parts Illustration...........................................................
DIVISION 08 70 00 HARDWARE FORMAT 1. Technical specifications content and numbering system shall be based on 2004 CSI MasterFormat.
FORMAT 1. Technical specifications content and numbering system shall be based on 2004 CSI MasterFormat. BASIS OF DESIGN 1. BGSU Design Standards shall not replace fully developed, project and market specific
Understanding Access Control
Understanding Access Control To understand access control, we must understand the language of the industry. Terms like alarm inputs, relays, timezones, anti-passback, shunt, and access levels are commonly
PHA 2000 PHB 3000 EXIT PAD
PHA 2000 PHB 000 EXIT PAD Panic Hardware in Contur Design PHA 2000 PHB 000 EXIT PAD THE MODULAR PANIC HARDWARE-SSTEM IN CONTUR DESIGN Prior knowledge of how to open the escape door is not expected. DANGER
2.02. Specifications. General. Products. Execution. Offset Pivots P-694 Top and Bottom Pivots
2.02 Standard Specifications General Entrances Description Furnish all necessary materials, labor and equipment for the complete installation of aluminum entrance doors, door frames and hardware as shown
Standard Door Specification
Element General Requirement To be defined in the project brief but should meet Building Regulations. All doors to be a minimum of 30 minute fire rated and must comply with all relevant UK legislation and
PROOF ONLY. Police and Fire Service Home Security & Fire Safety Checklist. Student Accommodation Security Checklist
Police and Fire Service Home Security & Fire Safety Checklist Student Accommodation Security Checklist A Self Assessment Guide for Landlords This checklist contains all the standards needed to make sure
9300BC SERIES Light Commercial Door Closer
Light Commercial Door Closer general information The 9300BC is a durable, economically priced door closer designed for commercial exterior and interior doors such as storefront and industrial applications.
Degree Key System. Technical Manual
Degree Key System Technical Manual Copyright 03-04, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission
What locks do I have Timber Doors
What locks do I have Timber Doors Introduction Locking mechanisms on doors are varied and it can be difficult to judge whether what you have is good, bad or indifferent. This information takes you through
RIM MOUNTED AND DUAL ACCESS LOCKS
RIM MOUNTED AND DUAL ACCESS LOCKS Introduction Introduction UNION offers a range of rim-mounted and dual access locks, which are ideal for commercial and residential use. The range includes rim locks and
CONCEALED BEARING HINGES. StANLEy ARCHItECtuRAL HARDwARE
CONCEALED BEARING HINGES StANLEy ARCHItECtuRAL HARDwARE STANLEY ARCHITECTURAL HARDWARE TABLE OF CONTENTS Page Table of contents...2 Company history...2 5 knuckle concealed bearing design...3 Full mortise
Technical Data Honeycomb Door Leaf 8-1-99
8--99 8-/8 8-7/8 B 8-/4 A A Dim. A Leaf Width B ELEVATION F DESIGN Vertical edge seams mechanically interlocked Square hinge and lock edges 4-/ x.4 full mortise hinge prep Gov. 60/6 cyl lock prep...prefix
All-Season Sunroom Sliding Glass Door Installation Instructions
ASRESGD-08 All-Season Sunroom Sliding Glass Door Installation Instructions Panel Frame Door Frame Left Side Foam Insulator IE241 H Bar Assembly Door Frame Top Track Panel Frame Door Frame Right Side Stationary
PERFORMANCE TEST REPORT. Rendered to: GLASSCRAFT DOOR COMPANY
Architectural Testing PERFORMANCE TEST REPORT Rendered to: GLASSCRAFT DOOR COMPANY SERIES/MODEL: Mahogany Entry Door PRODUCT TYPE: 6' x 8' Double Outswing Hardwood TDL Door with Half Circle TDL Transom
L Series. Commercial mortise locks
L Series Commercial mortise locks Contents 45 Mechanical lock guide 7 L Series introduction and performance features 89 Schlage L9000 and L400 Series 10 M Collection levers 12 Standard Collection levers
Division 8 Doors & Windows
Division 8 Doors & Windows 08050 Basic Door and Window Materials and Methods 1. Has a minimum door leaf size of 3-0 x 7-0 been specified for both interior and exterior doors? 2. Has the door height been
WE ARE UNION. replace with new shot. Mortice Lock Range. ASSA ABLOY, the global leader in door opening solutions
WE ARE UNION replace with new shot Mortice Lock Range ASSA ABLOY, the global leader in door opening solutions Contents Introduction 2 Professional range 4-15 StrongBOLT TM Lever Locks 4-5 StrongBOLT TM
Call for Availability
A-100 A-101 13/16" 2-11/16" A-100 (Left hand) A-101 (Right hand) (Anodized aluminum) Contents: 1 inside pull; 1 strike; Left Hand Shown 2-5/8" Description: Surface-mount; used by many manufacturers. You
K17.11 DOOR BOLTS K17 DOORS 01.09.2013
K17 DOORS K17.11 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Locking set series 86000...K17.11.03 2.
Vinyl Patio Door Systems
Vinyl Patio Door Systems Swing Patio Door Multi-point locking system anchors the door in three separate points along the door length. Activating the deadbolt lock provides maximum security. Swing Patio
a practical guide to home security.
THE YALE BRAND, with its unparalleled global reach and range of products, reassures more people in more countries than any other consumer locking solution. ASSA ABLOY is the global leader in door opening
INSTALLATION INSTRUCTIONS for Bifold Doors (JII103)
Thank you for selecting JELD-WEN products. Attached are JELD-WEN s recommended installation instructions for premium composite, hollow and solid core molded Bifold Doors. Bifolds are designed for fast
This directive establishes Department of Homeland Security (DHS) policy regarding the physical protection of facilities and real property.
Department of Homeland Security Management Directives System MD Number: 11030.1 Issue Date: 04/21/2003 PHYSICAL PROTECTION OF FACILITIES AND REAL PROPERTY I. Purpose This directive establishes Department
Balance Shoe and Balance Replacement
and Replacement for E-Series Double-Hung and Single-Hung Windows Thank you for choosing Andersen. For questions call 1-888-888-7020. For more information and/or guides visit www.eaglewindow.com Please
INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate Locks
Securitron Magnalock Corp. www.securitron.com ASSA ABLOY, the global leader Tel 800.624.5625 techsupport@securitron.com in door opening solutions INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate
Sliding and Folding Door Fittings Sliding Door Accessories
Sliding door lock Toplock For 1- and 2-leaf sliding doors Suitable for toughened safty glass and laminated sheet glass Suitable for DIN left and DIN right Max. weight per door leaf 120 kg For glass thickness:
EXIT HARDWARE. Uniclass L418184. CI/SfB (31.59) Xt7 VERSION: AUGUST-11. An ASSA ABLOY Group brand
EXIT HARDWARE The safe choice in eiting. High performance, high traffic devices that provide egress efficiency, freedom of movement and robust security. Uniclass L418184 VERSION: AUGUST-11 CI/SfB (31.59)
Technical Information
Technical Information This section of the catalogue provides technical information that will help specify, install and maintain Surelock McGill devices and components. The topics are listed below: Blast
Turning nature s beauty into works of art
f l u s h d o o r s Eggers 5-ply flush doors are the very embodiment of form marrying function - extraordinary beauty and exceptional durability. We are able to produce a variety of custom architectural
GLOSSARY OF LOCK TERMINOLOGY
GLOSSARY OF LOCK TERMINOLOGY The Master Locksmiths Association has created the following glossary of lock terminology to assist you with your security requirements. Don t forget that your first port of
ILCO Cylinders. Cams and Tailpieces. Keyways. Finish Codes. 1 Standard (863G) Composite NB HR1. Composite NA R1064E. 2 Adams Rite (863A) Arrow AA 1179
Keyways Cams and Tailpieces Arrow AA 1179 Composite NA R1064E Composite NB HR1 1 Standard (863G) 2 Adams Rite (863A) Corbin 60 CA 1001EH Corbin CD 59A1-A2 Dominion DA S54F UB Lori L100 Eagle 11929 Harloc
Automatic Door Selection Guide
Automatic Door Selection Guide AAADM 1300 Sumner Avenue Cleveland, OH 44115 P: 216-241-7333 F: 216-241-0105 aaadm@aaadm.com Automatic Door Selection Guide General: The members of AAADM manufacture an assortment
2006-2007 Safeguard Storm Doors Beauty, the security of advanced design, and the guarantee of a lifetime.*
2006-2007 Safeguard Storm Doors Beauty, the security of advanced design, and the guarantee of a lifetime.* 6 Designs To choose! Like all classic designs, Elite embraces balance and proportion while using
Glossary of TermsRev G
Glossary of TermsRev G Revised Feb 12, 2001 1 A access card credit card-sized device encoded with identification data and used to access a door. access code sequence of digits that is included in a personal
Residential Garage Door Terminology
A Air Infiltration: The leakage or passage of air through a door system Anodize: A hard non-corrosive oxide film on the surface of aluminum Astragal: A compressible or deformable seal provided on the bottom
Glass. Pre-Assembled Glass Entry Doors. In Stock Models Available! 1-800-486-8415
Glass Store Front Doors 1-800-486-8415 www.glassstorefrontdoors.com Pre-Assembled Glass Entry Doors Commercial Glass Store Front Doors Pre-Assembled and Ready for Quick Install In Stock Models Available!
Stainless Steel Continuous Hinges
Stainless Steel Continuous Hinges Hager heavy duty continuous hinges offer proven reliability that can stand up to the daily rigors of high-traffic, high-impact areas. They re designed and engineered to
Approved Document Q: Security
Approved Document Q: Security Requirement Q1 Unauthorised access Consultation draft September 2014 1 The approved documents What is an approved document? The Secretary of State has approved a series of
NEWSTAR BROCHURE. December 2007
NEWSTAR BROCHURE December 2007 Surface Overhead Door Closers Door Closing 5003 Silver Slide Cover SE Door Widths from 850mm to 1100mm. Door Weights 40kg to 80kg. Suitable for use in temperatures from -15
RADAR. 227 www.ncdirect.co.uk
RADAR solutions RADAR RADAR Key System 228 RADAR Lockset 229 RADAR Cover Plate 229 RADAR Padlock 230 RADAR Automatic Toilet Entry System 231 RADAR Ramp 231 RADAR Ramp Sign 231 227 www.ncdirect.co.uk RADAR
Fire-Rated Doors and Hardware. A Guide to Field Inspection
Fire-Rated Doors and Hardware A Guide to Field Inspection Foundation s Mission To promote secure and safe openings that enhance life safety Awareness To be a source of information through awareness campaign
COASTAL SERIES. 316 Solid Stainless Steel Door Furniture
COASTAL SERIES 316 Solid Stainless Steel Door Furniture DORMA COASTAL SERIES SOLID STAINLESS STEEL ROSE AND PLATE DOOR FURNITURE DORMA in Australia and New Zealand is developing into a leading manufacturer
Protect your home with
THE YALE BRAND, with its unparalleled global reach and range of products, reassures more people in more countries than any other consumer locking solution. ASSA ABLOY is the global leader in door opening
Keypad Locks User Guide
23780042 Keypad Locks User Guide Keypad Deadbolt (BE365) Keypad Lock (FE575, FE595) Contents Keypad Deadbolt (BE365)... 2 Lock Parts...2 Standard Operation...2 Replacing the Battery...3 Emergency Key Override...3
K. D. FRAME ASSEMBLY FOR CLOSED STEEL STUD WALLS...Ins 10. FRAME INSTALLATION DETAILS FOR CLOSED STEEL STUD WALLS...Ins 11
K. D. FRAME ASSEMBLY FOR MASONRY WALLS...........................Ins 2 FRAME INSTALLATION DETAILS FOR MASONRY WALLS......................Ins 3 INSTALLING EXISTING MASONRY WALL ANCHORS IN FRAME..................Ins
PRODUCT GUIDE Vinyl Patio Doors (JPG008)
This guide contains procedures for common user serviceable repair tasks found on vinyl patio doors. If a condition arises that is not covered in this guide, please contact us for professional help. This
ASSA HIGH SECURITY LOCKS ASSA Twin 6000. ASSA Twin 6000, Twin Exclusive & V10. ASSA cylinders can be supplied in the following keying forms:
ASSA Twin 6000 ASSA Twin 6000, Twin Exclusive & V10 Combining uncompromising physical security with the highest level of Key control, ASSA high security cylinders offer the ideal solution for situations
Mechanical Entry Locksets
Mechanical Entry Locksets We take the worry out of protecting what s valuable to you. Lockwood: no worries www.lockweb.com.au Contents Mechanical Entry Lockset Nexion Mechanical Entry Lever Options Nexion
CHARISMA SHOWER/TUB DOOR INSTALLATION INSTRUCTIONS
CHARISMA SHOWER/TUB DOOR INSTALLATION INSTRUCTIONS IMPORTANT DreamLine reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical drawings,
170 Sliding Patio Door available Styles
170 Sliding Patio Door available Styles A-171 OXO Continuous Frame Continuous Frame Transom Sidelite A-172 XO OX A-173 XOO OOX A-175 OXXO Manufacturer of Alpine Window Products 170 Sliding Patio Door Component
Garden Windows Builders Vinyl
TABLE OF CONTENTS Specifications... 8-2 QuickSpecGuide... 8-3 Elevations/Sizes: 1/4 Scale GardenUnits... 8-4 Grille Patterns... 8-5 SectionDetails: 6 Scale... 8-6 December 2008 JELD-WEN reserves the right
ILLUSION FRAMELESS SHOWER ENCLOSURE INSTALLATION INSTRUCTIONS
PREPARATION Approximate Installation Time: Tools Required for Installation: 60 minutes Hacksaw Electric Drill 3/16 Masonry Bit Pencil/Felt tip pen Safety Glasses Measuring Tape Masking Tape Standard Screw
Security steel door dw 52-1 Teckentrup DF WK 2 optionally with glazing/ventilation grille
Security steel door dw 52-1 Teckentrup DF WK 2 optionally with glazing/ventilation grille Text example Compile and tender according to requirements. Please refer to technical data below for respective
FIRE/LIFE SAFETY CLOSERS/HOLDERS SERIES
FIRE/LIFE SAFETY CLOSERS/HOLDERS SERIES PRODUCT SELECTION GUIDE SENTRONIC Series LCN closer/holders combine heavy duty closers with electrically controlled hold-open functions to control fire and smoke