For existing customer transition, and for new customers or new applications, contact Allegro Sales.
|
|
- Coral Holmes
- 7 years ago
- Views:
Transcription
1 . MHz Step-up Converter This device is in production, however, it has been deemed Pre-End of Life. The product is approaching end of life. Within a minimum of 6 months, the device will enter its final, Last Time Buy, order phase. Date of status change: June 3, 03 Recommended Substitutions: For existing customer transition, and for new customers or new applications, contact Allegro Sales. NOTE: For detailed information on purchasing options, contact your local Allegro field applications engineer or sales representative. reserves the right to make, from time to time, revisions to the anticipated product life cycle plan for a product to accommodate changes in production capabilities, alternative product availabilities, or market demand. The information included herein is believed to be accurate and reliable. However, assumes no responsibility for its use; nor for any infringements of patents or other rights of third parties which may result from its use.
2 . MHz Step-up Converter Features and Benefits Output voltage up to 3 V. to 0 V input 0.9 to 8 V input with separate bias supply Delivers V at ma with.7 V input Constant. MHz switching frequency provides low noise 30 ma switch current limit μa shutdown current Low-noise PWM/analog dimming Package: TDFN (suffix EK) 3 3 mm, 0.7 mm Nominal Height Approximate Scale : Description The is a current mode step-up dc-to-dc converter, available in a -pin 3 mm 3 mm thermally enhanced TDFN lead (Pb) free package. Smaller external components and integrated 36 V switch reduce component count and footprint for a variety of applications. Applications: bias supply / WLED backlight Portable battery-powered equipment Cellular phones PDAs (Personal Digital Assistant) Camcorders, personal stereos, MP3 players, cameras Mobile GPS systems. V to. V 80 kω 39 kω. V to. V 73 kω 39 kω D I OUT + I OUT = ma + V V C4 Figure. Bias Supply. Use for cell phones, MP3 players, DSCs, and PDAs. Figure. Small LCD Bias Supply. Li+ battery to ± V. V 768 kω for = 3 V 604 kω for = V kω 3 V, 8 ma V, ma / 0 V V Connect either V Z or V BIAS V Z 7. V V BIAS V 0. µh D 768 kω for = 3 V 604 kω for = V kω 3 V, 40 ma V, 80 ma / 0 V Figure 3. LCD TV, Plasma TV Bias, FED Display, Varactor Diode Bias. Using V input. Figure 4. LCD TV, Plasma TV Bias, FED Display, Varactor Diode Bias. Using V input.. V to. V Cf 0.0 kω 47 Ω 4 kω 0. µf Analog Voltage or PWM. V to. V 60 kω 60 kω Cf nf Figure. WLED Backlighting. Analog Voltage or PWM 0 khz Cf for PWM dimming only Figure 6. Bias Supply. Use for low-noise PWM dimming, or with analog voltage through the FB pin. -DS, Rev.
3 . MHz Step-up Converter Selection Guide Use the following complete part number when ordering: Part Number Packing* Description EEKTR-T 7-in. reel, 00 pieces/reel Surface Mount *Contact Allegro for additional packing options. FB Functional Block Diagram V REF. V 6 mv A R C C C A R S Q Driver Σ Ramp Generator EN. MHz Oscillator GND Terminal List Table Device Pin-out Diagram Pin Name Function Internal power FET GND Ground 3 FB Feedback input 4 EN input Input supply GND FB 3 4 EN Ab so lute Max i mum Rat ings Pin to 36 V Remaining Pins to 0 V Operating Ambient Temperature, T A C to 8 C Junction Temperature, T J(max)... 0 C Storage Temperature, T S... C to 0 C Package Thermal Characteristics R θja = 0 C/W, on a 4-layer board. Additional information is available on the Allegro Web site. Northeast Cutoff Worcester, Massachusetts U.S.A ;
4 . MHz Step-up Converter ELECTRICAL CHARACTERISTICS at T A = C, V IN = 3 V (unless otherwise noted) Characteristics Symbol Test Conditions Min. Typ. Max. Units Input Voltage Range V IN. 0 V Active: I OUT = ma, = V. 3. ma Supply Current I SUP Shutdown (EN = 0 V) 0. μa Feedback Reference Voltage V FB mv Feedback Input Current I FB V FB = 0.6 V 0 00 na Switch Current Limit I LIM 30 ma Switch Frequency F MHz Switch Maximum Duty Cycle D 8 90 % Switch Saturation voltage E(SAT) I = 0. A 30 mv Switch Leakage Current I SL V = 36 V μa Input Input Threshold Low V IL 0.4 V Input Threshold High V IH. V Input Leakage Leakage I IL μa Operating Characteristics (V IN = 3 V) 90 Efficiency versus Input Voltage = V; Toko 098AS-00M Inductor Feedback Bias Current versus Temperature V FB = 0.6 V Efficiency (%) I OUT (ma) I FB (na) V IN (V) Temperature ( C) Switching Frequency versus Temperature Quiescent Supply Current versus Temperature F (MHz)..0 ISUPQ (ma) Temperature ( C) Temperature ( C) Northeast Cutoff Worcester, Massachusetts U.S.A ; 3
5 . MHz Step-up Converter Functional Description Pin Functions. Supply to the control circuit. A bypass capacitor,, must be connected from close to this pin to GND. GND. Ground reference connected directly to the ground plane. The feedback resistor should have a separate connection directly to this point. EN. Voltage lower than 0.4 V disables the and puts the control circuit into the low-power sleep mode. Voltage greater than. V fully enables the.. Low-side switch connection between the inductor,, and ground. Because rapid changes of current occur at this pin, the traces on the PCB that are connected to this pin should be minimized. In addition, and the diode, D, should be connected as close to this pin as possible. FB. Feedback pin for voltage control or WLED current control. The reference voltage is 6 mv. Connect the feedback resistor close to this pin to minimize noise. Device Operation The uses a. MHz constant switching frequency currentmode control scheme to regulate the output voltage or current through the load. A typical bias supply is shown in figure 7. For driving s, output voltage is sensed by the FB pin through a voltage divider network. Output voltage, (V), is set according to the following equation: + R = R 0.6. () A typical WLED backlight supply is shown in figure 8. The load current, I LOAD, is set by the selecting the external sense resistor,, to produce 6 mv at the desired load, for example: = 0.6 I LOAD. () Voltage sensed across the FB pin is compared with the internal 6 mv reference to produce an error signal. The switch current is sensed by the internal sense resistor and compared to the error signal for current mode PWM control. As the error signal increases, I LOAD, increases to increase either output voltage,, or current, I OUT, such that the FB pin voltage follows the internal 6 mv reference voltage. As I LOAD is reduced, the energy required in the inductor,, also reduces, resulting in the inductor current dropping to zero for low load current levels. This is known as Discontinuous mode operation and results in some low-frequency ripple. The average load current will, however, remain regulated down to zero. In Discontinuous mode, when I LOAD drops to zero, the voltage at the pin rings, due to the resonant LC circuit formed by and the switch and diode D capacitance. This ringing is low-frequency and is not harmful. It can be damped with a resistor across the inductor but this will reduce efficiency and is not recommended.. V to. V 80 kω 39 kω. V to. V Cf 0.0 kω 47 Ω 4 kω 0. µf Analog Voltage or PWM Figure 7. Bias Supply. Use for cell phones, MP3 players, DSCs, and PDAs. (Circuit also shown in figure.) Figure 8. WLED Backlighting. (Circuit also shown in figure.) Northeast Cutoff Worcester, Massachusetts U.S.A ; 4
6 . MHz Step-up Converter Applications Information Dimming Control Display dimming can be achieved by controlling the output voltage,, using the FB pin. The circuitry behind the FB pin is flexible, to accommodate a variety of schemes used for dimming: Adjust the duty cycle of the pulse train applied to the FB pin through resistor, as shown in figure. Capacitor Cf is used to generate the average voltage level. Variation of output voltage with PWM duty cycle is shown in figure 9. Apply a constant dc voltage to the FB pin through resistor, as shown in figure. Variation of output voltage with dc voltage are shown in figure 0. Selection of the resistor connected between the FB pin and GND, as shown in figure for applications, and in figure 3 for WLED applications. The voltage drop across the transistor should be negligible compared to the FB sense voltage. Soft Start VOUT (V) Output voltage rise time at power-on can be extended by using a soft start circuit, such as the one shown in figure 4 for an application, and in figure 6 for a WLED application. At poweron, the device duty cycle begins initially at a high level, drawing a large current from the input supply,. The soft-start circuits shown can reduce the level of current flow by controlling the FB pin. When a signal is applied to the EN pin, capacitor discharges, pulling the FB pin high, and reducing to a minimum. When the EN signal is removed, recharges and as it does, the voltage drop across reduces, allowing the device duty cycle to. V to. V EN 4 60 kω GND FB 3 Analog Voltage or PWM 0 khz 60 kω Cf nf Cf for PWM dimming only Figure. Bias Supply. Use for low-noise PWM dimming, or with analog voltage through the FB pin Duty Cycle (%) Figure 9. PWM Dimming Control of Duty Cycle. Performance of V input circuit shown in figure 3.. V to. V 0 µh D Q 60 kω Cf nf 0 µf VOUT (V) (V) Figure. Dimming Control. Single-bit resolution using external transistor.. V to. V 0 µh D 80 Ω 80 Ω Q 0. µf Figure 0. DC Voltage Dimming Control of Duty Cycle. Performance of circuit shown in figure. Figure 3. WLED Dimming Control. Single-bit resolution using external transistor. Northeast Cutoff Worcester, Massachusetts U.S.A ;
7 . MHz Step-up Converter increase gradually. When the voltage drop across is reduced to less than about 0.8 V, the feedback from the sense resistor,, takes over full control of the output voltage. The length of the soft start delay depends on the combined effect of,, R4, and the amplitude of the EN signal. The delay can be adjusted by the selection of these values. Component Selection The component values shown in figure are sufficient for most applications. To reduce output ripple, the value of the output inductor,, may be increased, but in most cases this results in excessive board area and additional cost. Inductor Selection (). With an internal PWM frequency of. MHz, the optimum inductor value for most cases would be 0 μh. The inductor should have low winding resistance, typically <, and the core should have low losses at. MHz. For worst-case conditions of high output voltage and current, and low input voltage, the inductor should be rated at the switch current limit of 30 ma. If high temperature operation is required, derating should be considered. In some cases where lower inductor currents are expected, the current rating can be decreased. Several inductor manufacturers, including Coilcraft, Murata, Panasonic, Sumida, Taiyo Yuden, and TDK, have and are developing suitably small-size inductors. Two recommended inductors are: TDK: NLCV3T-00K-PF, 0 μh Toko: 098AS-00M, 0 μh Diode Selection (D). The diode should have a low forward voltage to reduce conduction losses, and a low capacitance to reduce switching losses. Schottky diodes can provide both these features if carefully selected. The forward voltage drop is a natural advantage for Schottky diodes, and it reduces as the current rating of the component increases. However, as the current rating increases, the diode capacitance also increases, so the optimum selection is usually the lowest current rating above the circuit maximum. In this application, an average current rating of 00 to 00 ma is usually sufficient. Capacitor Selection. Because the values recommended for the capacitors are low, ceramic capacitors are the best choice for this application. To reduce performance variation over temperature changes, low drift types such as X7R and XR should be used. 0 µh Figure 4. Soft Start Circuit EN I IN. V to. V µh R4 0 nf. A.0 μf capacitor on the pin is suitable for most applications. In cases where large inductor currents are switched, a larger capacitor may be needed.. The output capacitor can be as small as 0. μf for most applications and most V IN / combinations. Increasing this capacitor value aids in reducing ripple and increasing efficiency in low input voltage / high output voltage conditions. Suitable capacitors are available from: TDK, Taiyo Yuden, Murata, Kemet, and AVX. D D 4 kω 80 kω 39 kω Figure. Soft Start Circuit. Performance of circuit shown in figure 4.. V to. V R4 Figure 6. WLED Soft Start Circuit D 0.0 D kω 4 kω 4.7 Ω 0. µf Northeast Cutoff Worcester, Massachusetts U.S.A ; 6
8 . MHz Step-up Converter. V to. V 73 kω 39 kω D I OUT + I OUT = ma + V V C4 (V) Line Regulation VOUT..0.8 VOUT (V) Figure 7. Line Regulation Perfomance for Small LCD Bias Supply, I OUT = I OUT = 7. ma (circuit also shown in figure ) V 768 kω for = 3 V 604 kω for = V kω 3 V, 8 ma V, ma / 0 V (V) Load Regulation 34 3 VOUT = 3 V VOUT = V IOUT (ma) Figure 8.Load Regulation for LCD TV, Plasma TV Bias, FED Display, Varactor Diode Bias; = V (circuit also shown in figure 3) V Connect either V Z or V BIAS V Z 7. V V BIAS V 0. µh D 768 kω for = 3 V 604 kω for = V kω 3 V, 40 ma V, 80 ma / 0 V (V) Load Regulation 34 3 VOUT = 3 V VOUT = V IOUT (ma) Figure 9. Load Regulation for LCD TV, Plasma TV Bias, FED Display, Varactor Diode Bias; = V (circuit also shown in figure 4). The can operate with a from 0.9 to 8 V with a separate bias supply to operate the in the normal V IN range. The bias voltage can be supplied by an external power supply, such as 3.3 or V, or by using a suitable Zener diode, V Z, for > 0 V. Northeast Cutoff Worcester, Massachusetts U.S.A ; 7
9 . MHz Step-up Converter Leadframe plating 00% matte-tin. Solder pad layout compatible with SOT3- (SOT9P80-). Package EK, TDFN A B C D Preliminary dimensions, for reference only (reference JEDEC MO-9 WEEA) Dimensions in millimeters U.S. Customary dimensions (in.) in brackets, for reference only Dimensions exclusive of mold flash, gate burrs, and dambar protrusions Exact case and lead configuration at supplier discretion within limits shown Terminal # mark area Exposed thermal pad (reference dimensions only, terminal # identifier appearance at supplier discretion) Reference pad layout (reference IPC SON9P300X30-7WEEAN); adjust as necessary to meet application process requirements Reference pad layout with contact pads only; adjust as necessary to meet application process requirements X X 0.08 [.003] C 0.0 [.004] M C A B 0.0 [.00] M C A A 3..8 B REF SEATING PLANE C R0.0 REF.008 B.00 NOM NOM MAX MAX MAX 0.0 x 0.0 REF.008 x MAX D C Northeast Cutoff Worcester, Massachusetts U.S.A ; 8
10 . MHz Step-up Converter reserves the right to make, from time to time, such de par tures from the detail spec i fi ca tions as may be required to permit improvements in the per for mance, reliability, or manufacturability of its products. Before placing an order, the user is cautioned to verify that the information being relied upon is current. Allegro products are not authorized for use as critical components in life-support devices or sys tems without express written approval. The in for ma tion in clud ed herein is believed to be ac cu rate and reliable. How ev er, assumes no re spon si bil i ty for its use; nor for any in fringe ment of patents or other rights of third parties which may result from its use. Copyright For the latest version of this document, visit our website: Northeast Cutoff Worcester, Massachusetts U.S.A ; 9
LDS8720. 184 WLED Matrix Driver with Boost Converter FEATURES APPLICATION DESCRIPTION TYPICAL APPLICATION CIRCUIT
184 WLED Matrix Driver with Boost Converter FEATURES High efficiency boost converter with the input voltage range from 2.7 to 5.5 V No external Schottky Required (Internal synchronous rectifier) 250 mv
More informationLast Time Buy. Deadline for receipt of LAST TIME BUY orders: April 30, 2011
Last Time Buy This part is in production but has been determined to be LAST TIME BUY. This classification indicates that the product is obsolete and notice has been given. Sale of this device is currently
More informationLM2704 Micropower Step-up DC/DC Converter with 550mA Peak Current Limit
Micropower Step-up DC/DC Converter with 550mA Peak Current Limit General Description The LM2704 is a micropower step-up DC/DC in a small 5-lead SOT-23 package. A current limited, fixed off-time control
More informationTYPICAL APPLICATION CIRCUIT. ORDER INFORMATION SOP-EP 8 pin A703EFT (Lead Free) A703EGT (Green)
www.addmtek.com 2 CHANNELS 150mA HIGH VOLTAGE ADJUSTABLE CURRENT REGULATOR DESCRIPTION A703 is a high voltage, adjustable constant current driver for LED applications. Two regulated current ports are designed
More informationFAN5346 Series Boost LED Driver with PWM Dimming Interface
FAN5346 Series Boost LED Driver with PWM Dimming Interface Features Asynchronous Boost Converter Drives LEDs in Series: FAN5346S20X: 20V Output FAN5346S30X: 30V Output 2.5V to 5.5V Input Voltage Range
More informationCAT4139. 22 V High Current Boost White LED Driver
22 V High Current Boost White LED Driver Description The CAT4139 is a DC/DC step up converter that delivers an accurate constant current ideal for driving LEDs. Operation at a fixed switching frequency
More informationWHITE LED STEP-UP CONVERTER. Features
General Description The is an inductor-based DC/DC converter designed to drive up to eight white LEDs in series for backlight. Only one feedback resistor is needed to control the LED current and obtain
More informationMP2259 1A, 16V, 1.4MHz Step-Down Converter
MP59 1A, 1V, 1.MHz Step-Down Converter TM The Future of Analog IC Technology DESCRIPTION The MP59 is a monolithic integrated stepdown switch mode converter with an internal power MOSFET. It achieves 1A
More informationMP2365 3A, 28V, 1.4MHz Step-Down Converter
The Future of Analog IC Technology MP365 3A, 8,.MHz Step-Down Converter DESCRIPTION The MP365 is a.mhz step-down regulator with a built-in Power MOSFET. It achieves 3A continuous output current over a
More informationPAM2804. Pin Assignments. Description. Applications. Features. Typical Applications Circuit 1A STEP-DOWN CONSTANT CURRENT, HIGH EFFICIENCY LED DRIVER
1A STEP-DOWN CONSTANT CURRENT, HIGH EFFICIENCY LED DRIER Description Pin Assignments The is a step-down constant current LED driver. When the input voltage is down to lower than LED forward voltage, then
More informationDual Full-Bridge PWM Motor Driver
Dual Full-Bridge PWM Motor Driver Features and Benefits 0 ma continuous output current V output sustaining voltage nternal clamp diodes nternal PWM current control Low output saturation voltage nternal
More informationAAT4280 Slew Rate Controlled Load Switch
General Description Features SmartSwitch The AAT4280 SmartSwitch is a P-channel MOSFET power switch designed for high-side load switching applications. The P-channel MOSFET device has a typical R DS(ON)
More informationA1301 and A1302. Continuous-Time Ratiometric Linear Hall Effect Sensor ICs
Features and enefits Low-noise output Fast power-on time Ratiometric rail-to-rail output 4.5 to 6.0 V operation Solid-state reliability Factory-programmed at end-of-line for optimum performance Robust
More informationCAT4101TV. 1 A Constant-Current LED Driver with PWM Dimming
A Constant-Current LED Driver with PWM Dimming Description The CAT4 is a constant current sink driving a string of high brightness LEDs up to A with very low dropout of.5 V at full load. It requires no
More informationA3968. Dual Full-Bridge PWM Motor Driver
Dual Full-Bridge PWM Motor Driver Features and Benefits ±650 ma continuous output current 30 V output voltage rating Internal fixed-frequency PWM current control Satlington sink drivers Brake mode User-selectable
More informationA1301 and A1302. Continuous-Time Ratiometric Linear Hall Effect Sensor ICs DESCRIPTION FEATURES AND BENEFITS. Packages:
FEATURES AN BENEFITS Low-noise output Fast power-on time Ratiometric rail-to-rail output 4.5 to 6.0 V operation Solid-state reliability Factory-programmed at end-of-line for optimum performance Robust
More informationMP1541 1.3MHz Boost Converter
MP5.3MHz Boost Converter The Future of Analog IC Technology DESCRIPTION The MP5 is a 5-pin thin SOT3 current mode step up converter intended for small, low power applications. The MP5 switches at.3mhz
More informationCurrent Sensor: ACS755xCB-050
Package CB-PFF 5 4 The Allegro ACS75x family of current sensors provides economical and precise solutions for current sensing in industrial, automotive, commercial, and communications systems. The device
More informationICS650-44 SPREAD SPECTRUM CLOCK SYNTHESIZER. Description. Features. Block Diagram DATASHEET
DATASHEET ICS650-44 Description The ICS650-44 is a spread spectrum clock synthesizer intended for video projector and digital TV applications. It generates three copies of an EMI optimized 50 MHz clock
More informationAP1509. 150KHz, 2A PWM BUCK DC/DC CONVERTER. Description. Pin Assignments V IN. Applications. Features. (Top View) GND GND. Output AP1509 GND GND
Description Pin Assignments The series are monolithic IC designed for a stepdown DC/DC converter, and own the ability of driving a 2A load without additional transistor. It saves board space. The external
More informationA3967. Microstepping Driver with Translator
Features and Benefits ±750 ma, 30 V output rating Satlington sink drivers Automatic current-decay mode detection/selection 3.0 to 5.5 V logic supply voltage range Mixed, fast, and slow current-decay modes
More informationMP2456 0.5A, 50V, 1.2MHz Step-Down Converter in a TSOT23-6
MP2456 0.5A, 50V, 1.2MHz Step-Down Converter in a TSOT23-6 DESCRIPTION The MP2456 is a monolithic, step-down, switchmode converter with a built-in power MOSFET. It achieves a 0.5A peak-output current over
More informationTypical Application +5 V 8 VCC 7 VIOUT 1 IP+ 2 IP+ V OUT ACS715 3 6 IP FILTER 4 IP 5 GND C F
Features and Benefits Low-noise analog signal path Device bandwidth is set via the pin 5 μs output rise time in response to step input current khz bandwidth Total output error.5% typical at T A = 5 C Small
More information28V, 2A Buck Constant Current Switching Regulator for White LED
28V, 2A Buck Constant Current Switching Regulator for White LED FP7102 General Description The FP7102 is a PWM control buck converter designed to provide a simple, high efficiency solution for driving
More informationMIC2844A. Features. General Description. Applications. Typical Application
High Efficiency 6 Channel WLED Driver with DAM and Single Wire Digital Control General Description The is a high efficiency linear White LED (WLED) driver designed to drive up to six WLEDs, greatly extending
More informationSeries AMLDL-Z Up to 1000mA LED Driver
FEATURES: Click on Series name for product info on aimtec.com Series Up to ma LED Driver Models Single output Model Input Voltage (V) Step Down DC/DC LED driver Operating Temperature range 4ºC to 85ºC
More informationNCP1529. 1.7MHz, 1A, High Efficiency, Low Ripple, Adjustable Output Voltage Step-down Converter
.7MHz, A, High Efficiency, Low Ripple, Adjustable Output Voltage Step-down Converter The NCP529 stepdown DCDC converter is a monolithic integrated circuit for portable applications powered from one cell
More informationFeatures. Modulation Frequency (khz) VDD. PLL Clock Synthesizer with Spread Spectrum Circuitry GND
DATASHEET IDT5P50901/2/3/4 Description The IDT5P50901/2/3/4 is a family of 1.8V low power, spread spectrum clock generators capable of reducing EMI radiation from an input clock. Spread spectrum technique
More informationTypical Application +5 V VCC 2 V OUT ACS712 FILTER 4 IP GND. C F 1 nf
ACS7 Features and Benefits Low-noise analog signal path Device bandwidth is set via the new pin 5 μs output rise time in response to step input current khz bandwidth Total output error.5% at T A = 5 C
More informationSPREAD SPECTRUM CLOCK GENERATOR. Features
DATASHEET ICS7152 Description The ICS7152-01, -02, -11, and -12 are clock generators for EMI (Electro Magnetic Interference) reduction (see below for frequency ranges and multiplier ratios). Spectral peaks
More informationDiscontinued Product For Reference Only
Data Sheet 29319.12A 2962 DUAL PULSE-WIDTH MODULATED CURRENT CONTROL GROUND IN A SENSE A SINK A SOURCE A THS A V CC SOURCE B SINKB SENSEB IN B THS B 1 2 3 4 5 6 7 8 9 1 11 12 LOGIC LOGIC Dwg. No. D-11
More informationNCP707. 200 ma, Very-Low Quiescent Current, I Q 25 A, Low Noise, Low Dropout Regulator
NCP77 2 ma, Very-Low Quiescent Current, I Q 25 A, Low Noise, Low Dropout Regulator The NCP77 is 2 ma LDO that provides the engineer with a very stable, accurate voltage with very low noise suitable for
More informationAP331A XX G - 7. Lead Free G : Green. Packaging (Note 2)
Features General Description Wide supply Voltage range: 2.0V to 36V Single or dual supplies: ±1.0V to ±18V Very low supply current drain (0.4mA) independent of supply voltage Low input biasing current:
More informationNCP9001. 1.5 MHz, 600 ma, High Efficiency, Low Quiescent Current, Adjustable Output Voltage Step Down Converter
.5 MHz, 6 ma, High Efficiency, Low Quiescent Current, Adjustable Output Voltage Step Down Converter The NCP step down PWM DC DC converter is optimized for portable applications powered from one cell Li
More information400KHz 60V 4A Switching Current Boost / Buck-Boost / Inverting DC/DC Converter
Features Wide 5V to 32V Input Voltage Range Positive or Negative Output Voltage Programming with a Single Feedback Pin Current Mode Control Provides Excellent Transient Response 1.25V reference adjustable
More informationPAM2316. Description. Pin Assignments. Applications. Features. A Product Line of. Diodes Incorporated. 2.5MHz, FAST TRANSIENT 2A STEP-DOWN CONVERTER
2.5MHz, FAST TRANSIENT 2A STEP-DOWN CONVERTER Description Pin Assignments The is a 2A step-down sync converter. The 2.5MHz switching frequency enables the use of small external components. The ultra-small
More informationICS514 LOCO PLL CLOCK GENERATOR. Description. Features. Block Diagram DATASHEET
DATASHEET ICS514 Description The ICS514 LOCO TM is the most cost effective way to generate a high-quality, high-frequency clock output from a 14.31818 MHz crystal or clock input. The name LOCO stands for
More informationLM386 Low Voltage Audio Power Amplifier
Low Voltage Audio Power Amplifier General Description The LM386 is a power amplifier designed for use in low voltage consumer applications. The gain is internally set to 20 to keep external part count
More information1 TO 4 CLOCK BUFFER ICS551. Description. Features. Block Diagram DATASHEET
DATASHEET 1 TO 4 CLOCK BUFFER ICS551 Description The ICS551 is a low cost, high-speed single input to four output clock buffer. Part of IDT s ClockBlocks TM family, this is our lowest cost, small clock
More information.OPERATING SUPPLY VOLTAGE UP TO 46 V
L298 DUAL FULL-BRIDGE DRIVER.OPERATING SUPPLY VOLTAGE UP TO 46 V TOTAL DC CURRENT UP TO 4 A. LOW SATURATION VOLTAGE OVERTEMPERATURE PROTECTION LOGICAL "0" INPUT VOLTAGE UP TO 1.5 V (HIGH NOISE IMMUNITY)
More informationAP1506. 150KHz, 3A PWM BUCK DC/DC CONVERTER. Pin Assignments. Description. Features. Applications. ( Top View ) 5 SD 4 FB 3 Gnd 2 Output 1 V IN
Description Pin Assignments The series are monolithic IC designed for a stepdown DC/DC converter, and own the ability of driving a 3A load without external transistor. Due to reducing the number of external
More informationCE8301 Series. Introduction. Features. Ordering Information. Applications SMALL PACKAGE PFM CONTROL STEP-UP DC/DC CONVERTER
SMALL PACKAGE PFM CONTROL STEP-UP DC/DC CONVERTER Introduction The is a CMOS PFM-control step-up switching DC/DC converter that mainly consists of a reference voltage source, an oscillator, and a comparator.
More informationApplication Information Fully Integrated Hall Effect Motor Driver for Brushless DC Vibration Motor Applications
Application Information Fully Integrated Hall Effect Motor Driver for Brushless DC Vibration Motor Applications By Shaun Milano Vibration motors are used in a variety of applications including mobile phone
More informationSC603 CHARGE PUMP REGULATOR WITH SELECTABLE 5.0V/4.5V OUTPUT POWER MANAGEMENT
Description The SC603 is a versatile charge pump designed for use in battery operated power supply applications. The wide input range is matched for Li-Ion battery applications. nly two tiny ceramic bucket
More informationICS650-01 SYSTEM PERIPHERAL CLOCK SOURCE. Description. Features. Block Diagram DATASHEET
DATASHEET ICS650-01 Description The ICS650-01 is a low-cost, low-jitter, high-performance clock synthesizer for system peripheral applications. Using analog/digital Phase-Locked Loop (PLL) techniques,
More informationICS379. Quad PLL with VCXO Quick Turn Clock. Description. Features. Block Diagram
Quad PLL with VCXO Quick Turn Clock Description The ICS379 QTClock TM generates up to 9 high quality, high frequency clock outputs including a reference from a low frequency pullable crystal. It is designed
More informationCAT4109, CAV4109. 3-Channel Constant-Current RGB LED Driver with Individual PWM Dimming
3-Channel Constant-Current RGB LED Driver with Individual PWM Dimming Description The CAT419/CAV419 is a 3 channel constant current LED driver, requiring no inductor. LED channel currents up to 175 ma
More informationHigh Frequency True PWM Dimming White LED Driver MP3304 and MP3305
The Future of Analog IC Technology AN021 High Frequency True PWM Dimming White LED Driver MP3304 and MP3305 High Frequency True PWM Dimming White LED Driver MP3304 and MP3305 Prepared by Zhijun Ye and
More informationProgrammable Single-/Dual-/Triple- Tone Gong SAE 800
Programmable Single-/Dual-/Triple- Tone Gong Preliminary Data SAE 800 Bipolar IC Features Supply voltage range 2.8 V to 18 V Few external components (no electrolytic capacitor) 1 tone, 2 tones, 3 tones
More informationTypical Application +5 V VCC 2 V OUT ACS712 FILTER 4 IP GND. C F 1 nf
ACS Fully Integrated, Hall Effect-Based Linear Current Sensor with. kvrms Voltage Isolation and a Low-Resistance Current Conductor Features and Benefits Low-noise analog signal path Device bandwidth is
More informationLM350. 3.0 A, Adjustable Output, Positive Voltage Regulator THREE TERMINAL ADJUSTABLE POSITIVE VOLTAGE REGULATOR
3. A, able Output, Positive Voltage Regulator The is an adjustable threeterminal positive voltage regulator capable of supplying in excess of 3. A over an output voltage range of 1.2 V to 33 V. This voltage
More informationLTC3026 1.5A Low Input Voltage VLDO Linear Regulator. Description. Features. Applications. Typical Application
Features n Input Voltage Range: 1.14V to 3.5V (with Boost Enabled) 1.14V to 5.5V (with External 5V Boost) n Low Dropout Voltage: 1mV at I = 1.5A n Adjustable Output Range:.4V to 2.6V n Output Current:
More informationDescription. Application Diagram
Features and Benefits 3 10-bit PWM brightness settings 3 7-bit dot correction current settings 5 to 17 V operation Wide output current range, 10 to 150 ma per channel Internally generated PWM clock Serial
More informationA3959. DMOS Full-Bridge PWM Motor Driver
Features and Benefits ±3 A, 50 V Output Rating Low r DS(on) Outputs (70 m, Typical) Mixed, Fast, and Slow Current-Decay Modes Synchronous Rectification for Low Power Dissipation Internal UVLO and Thermal-Shutdown
More informationNCP3065, NCV3065. Up to 1.5 A Constant Current Switching Regulator for LEDs
Up to.5 A Constant Current Switching Regulator for LEDs The NCP3065 is a monolithic switching regulator designed to deliver constant current for powering high brightness LEDs. The device has a very low
More informationNUD4001, NSVD4001. High Current LED Driver
NUD, NSVD High Current LED Driver This device is designed to replace discrete solutions for driving LEDs in low voltage AC DC applications. V, V or V. An external resistor allows the circuit designer to
More information0.9V Boost Driver PR4403 for White LEDs in Solar Lamps
0.9 Boost Driver for White LEDs in Solar Lamps The is a single cell step-up converter for white LEDs operating from a single rechargeable cell of 1.2 supply voltage down to less than 0.9. An adjustable
More informationNTMS4920NR2G. Power MOSFET 30 V, 17 A, N Channel, SO 8 Features
NTMS9N Power MOSFET 3 V, 7 A, N Channel, SO Features Low R DS(on) to Minimize Conduction Losses Low Capacitance to Minimize Driver Losses Optimized Gate Charge to Minimize Switching Losses These Devices
More informationDATA SHEET. TDA1518BQ 24 W BTL or 2 x 12 watt stereo car radio power amplifier INTEGRATED CIRCUITS
INTEGRATED CIRCUITS DATA SHEET File under Integrated Circuits, IC01 July 1994 GENERAL DESCRIPTION The is an integrated class-b output amplifier in a 13-lead single-in-line (SIL) plastic power package.
More informationDatasheet. 2A 380KHZ 20V PWM Buck DC/DC Converter. Features
General Description Features The is a 380 KHz fixed frequency monolithic step down switch mode regulator with a built in internal Power MOSFET. It achieves 2A continuous output current over a wide input
More informationSTF203-15 THRU STF203-33
Description The STF03 is a combination EMI filter and line termination device with integrated diodes for use on upstream USB ports. It is constructed using a proprietary technology that allows passive
More informationNUD4011. Low Current LED Driver
NUD0 Low LED Driver This device is designed to replace discrete solutions for driving LEDs in AC/DC high voltage applications (up to 00 V). An external resistor allows the circuit designer to set the drive
More informationDATA SHEET. TDA8560Q 2 40 W/2 Ω stereo BTL car radio power amplifier with diagnostic facility INTEGRATED CIRCUITS. 1996 Jan 08
INTEGRATED CIRCUITS DATA SHEET power amplifier with diagnostic facility Supersedes data of March 1994 File under Integrated Circuits, IC01 1996 Jan 08 FEATURES Requires very few external components High
More informationMAX17061A Evaluation Kit/Evaluation System
19-4654; Rev 0; 5/09 MAX17061A Evaluation Kit/Evaluation System General Description The MAX17061A evaluation system (EV system) consists of the MAX17061A evaluation kit (EV kit) and the Maxim CMAXQUSB+
More informationNCT3941S/S-A Nuvoton 4 Times Linear Fan Driver NCT3941S/S-A
Nuvoton 4 Times Linear Fan Driver NCT3941S/S-A -I- Revision A4 Table of Content- 1. GENERAL DESCRIPTION...1 2. FEATURES...1 3. APPLICATION...1 4. BLOCK DIAGRAM...2 5. PIN CONFIGURATION AND TYPICAL APPLICATION
More informationCA723, CA723C. Voltage Regulators Adjustable from 2V to 37V at Output Currents Up to 150mA without External Pass Transistors. Features.
CA73, CA73C Data Sheet April 1999 File Number 788. Voltage Regulators Adjustable from V to 37V at Output Currents Up to 1mA without External Pass Transistors The CA73 and CA73C are silicon monolithic integrated
More informationLM2576R. 3.0A, 52kHz, Step-Down Switching Regulator FEATURES. Applications DESCRIPTION TO-220 PKG TO-220V PKG TO-263 PKG ORDERING INFORMATION
LM2576 FEATURES 3.3, 5.0, 12, 15, and Adjustable Output ersions Adjustable ersion Output oltage Range, 1.23 to 37 +/- 4% AG10Maximum Over Line and Load Conditions Guaranteed 3.0A Output Current Wide Input
More informationTDA4605 CONTROL CIRCUIT FOR SWITCH MODE POWER SUPPLIES USING MOS TRANSISTORS
CONTROL CIRCUIT FOR SWITCH MODE POWER SUPPLIES USING MOS TRANSISTORS Fold-Back Characteristic provides Overload Protection for External Diodes Burst Operation under Short-Circuit and no Load Conditions
More informationDUAL FULL-BRIDGE PWM MOTOR DRIVER
9 Data Sheet 99.0F PWM OUT A OUT A E SENSE OUT B UDN9B (DP) 0 9 LOAD SUPPLY E SENSE OUT B The UDN9B, UDN9EB, and UDN9LB motor drivers are designed to drive both windings of a bipolar stepper motor or bidirectionally
More informationL6920D 1V HIGH EFFICIENCY SYNCRONOUS STEP UP CONVERTER. 1 Features. 2 Description L6920DTR. Figure 1. Package
1V HIGH EFFICIENCY SYNCRONOUS STEP UP CONVERTER 1 Features 0.6 TO 5.5V OPERATING INPUT VOLTAGE 1V START UP INPUT VOLTAGE INTERNAL SYNCHRONOUS RECTIFIER ZERO SHUT DOWN CURRENT 3.3V AND 5V FIXED OR ADJUSTABLE
More informationSupertex inc. HV256. 32-Channel High Voltage Amplifier Array HV256. Features. General Description. Applications. Typical Application Circuit
32-Channel High Voltage Amplifier Array Features 32 independent high voltage amplifiers 3V operating voltage 295V output voltage 2.2V/µs typical output slew rate Adjustable output current source limit
More informationLM1084 5A Low Dropout Positive Regulators
5A Low Dropout Positive Regulators General Description The LM1084 is a series of low dropout voltage positive regulators with a maximum dropout of 1.5 at 5A of load current. It has the same pin-out as
More informationHigh Accuracy, Ultralow IQ, 1.5 A, anycap Low Dropout Regulator ADP3339
Data Sheet High Accuracy, Ultralow IQ,.5 A, anycap Low Dropout Regulator FEATURES FUNCTIONAL BLOCK DIAGRAM High accuracy over line and load: ±.9% at 5 C, ±.5% over temperature Ultralow dropout voltage:
More informationLT3590 48V Buck Mode LED Driver in SC70 and 2mm x 2mm DFN DESCRIPTION FEATURES APPLICATIONS TYPICAL APPLICATION
FEATURES 4.5V to 55V Input Voltage Range Up to 5mA Current 8mA, 55V Switch Internal Schottky Diode 15μA Supply Current in Shutdown 5μA Supply Current Operating, Not Switching Switching Frequency: 85kHz
More informationMC34063A MC34063E DC-DC CONVERTER CONTROL CIRCUITS
MC34063A MC34063E DC-DC CONVERTER CONTROL CIRCUITS OUTPUT SWITCH CURRENT IN EXCESS OF 1.5A 2% REFERENCE ACCURACY LOW QUIESCENT CURRENT: 2.5mA (TYP.) OPERATING FROM 3V TO 40V FREQUENCY OPERATION TO 100KHz
More information28 V, 56 m, Load Switch with Programmable Current Limit and Slew Rate Control
28 V, 56 m, Load Switch with Programmable Current Limit and Slew Rate Control OPERATION DESCRIPTION SiP32419 and SiP32429 are load switches that integrate multiple control features that simplify the design
More informationSELECTION GUIDE. Nominal Input
www.murata-ps.com NKE Series FEATURES RoHS Compliant Sub-Miniature SIP & DIP Styles 3kVDC Isolation UL Recognised Wide Temperature performance at full 1 Watt load, 40 C to 85 C Increased Power Density
More informationTRIPLE PLL FIELD PROG. SPREAD SPECTRUM CLOCK SYNTHESIZER. Features
DATASHEET ICS280 Description The ICS280 field programmable spread spectrum clock synthesizer generates up to four high-quality, high-frequency clock outputs including multiple reference clocks from a low-frequency
More informationTypical Application VCC IP+ IP+ V OUT VIOUT ACS714 FILTER IP IP GND
Features and Benefits Low-noise analog signal path Device bandwidth is set via the FILTER pin 5 μs output rise time in response to step input current khz bandwidth Total output error.5% typical, at T A
More informationST1S10. 3 A, 900 khz, monolithic synchronous step-down regulator. Features. Description. Applications
3 A, 900 khz, monolithic synchronous step-down regulator Features Step-down current mode PWM regulator Output voltage adjustable from 0.8 V Input voltage from 2.5 V up to 18 V 2% DC output voltage tolerance
More informationMIC33050. General Description. Features. Applications. Typical Application. 4MHz Internal Inductor PWM Buck Regulator with HyperLight Load
4MHz Internal Inductor PWM Buck Regulator with HyperLight Load General Description The Micrel is a high-efficiency 600mA PWM synchronous buck (step-down) regulator with internal inductor featuring HyperLight
More informationSDC15. TVS Diode Array for ESD Protection of 12V Data and Power Lines. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The SDC15 transient voltage suppressor (TVS) is designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD),
More informationA4931. 3-Phase Brushless DC Motor Pre-Driver
Features and Benefits Drives 6 N-channel MOSFETs Synchronous rectification for low power dissipation Internal UVLO and thermal shutdown circuitry Hall element inputs PWM current limiting Dead time protection
More informationSTF201-22 & STF201-30
Description The STF201 is a combination EMI filter and line termination device with integrated TVS diodes for use on downstream USB ports. It is constructed using a proprietary technology that allows passive
More informationNCP1522B. 3 MHz, 600 ma Step-Down DC-DC Converter. High Efficiency, Low Ripple, Adjustable Output Voltage
3 MHz, 600 ma Step-Down DC-DC Converter High Efficiency, Low Ripple, Adjustable Output Voltage The NCP522B step down DC DC converter is a monolithic integrated circuit optimized for portable applications
More informationLM118/LM218/LM318 Operational Amplifiers
LM118/LM218/LM318 Operational Amplifiers General Description The LM118 series are precision high speed operational amplifiers designed for applications requiring wide bandwidth and high slew rate. They
More informationA8503 High Efficiency 6-Channel, 2 MHz, WLED/RGB Driver for Medium Displays, with Integrated 55 V Power Switch
Features and Benefits Active current sharing between LED strings for ±0.6% accuracy and matching Drives up to 12 series 6 parallel = 72 LEDs (V f = 3.2 V, I f = 20 ma) at 5 V Each individual current sink
More informationHigh Accuracy, Ultralow IQ, 1 A, anycap Low Dropout Regulator ADP3338
High Accuracy, Ultralow IQ, 1 A, anycap Low Dropout Regulator ADP3338 FEATURES High accuracy over line and load: ±.8% @ 25 C, ±1.4% over temperature Ultralow dropout voltage: 19 mv (typ) @ 1 A Requires
More informationMM74HC14 Hex Inverting Schmitt Trigger
MM74HC14 Hex Inverting Schmitt Trigger General Description The MM74HC14 utilizes advanced silicon-gate CMOS technology to achieve the low power dissipation and high noise immunity of standard CMOS, as
More information3-Channel Supervisor IC for Power Supply
3-Channel Supervisor IC for Power Supply Features Over-voltage protection and lockout Under-voltage protection and lockout Open drain power good output signal Built-in 300mS delay for power good 38mS de-bounce
More informationSTCS1A. 1.5 A max constant current LED driver. Features. Applications. Description
1.5 A max constant current LED driver Features Up to 40 V input voltage Less than 0.5 V voltage overhead Up to 1.5 A output current PWM dimming pin Shutdown pin LED disconnection diagnostic DFN8 (3 x 3
More informationMC10SX1190. Fibre Channel Coaxial Cable Driver and Loop Resiliency Circuit
Fibre Channel Coaxial Cable Driver and Loop Resiliency Circuit Description The MC10SX1190 is a differential receiver, differential transmitter specifically designed to drive coaxial cables. It incorporates
More informationRT9515. Linear Single Cell Li-Ion Battery Charger IC. General Description. Features. Applications. Ordering Information RT9515. Pin Configurations
Linear Single Cell Li-Ion Battery Charger IC General Description The RT515 is a fully integrated low cost single-cell Li- Ion battery charger IC ideal for portable applications. The RT515 is capable of
More informationAP1510. General Description. Features. Applications. Typical Application Circuit PWM CONTROL 3A STEP-DOWN CONVERTER AP1510. x (1+R A = V FB /R B
Features General Description Input voltage: 3.6 to 23 Output voltage: 0.8 to CC. Duty ratio: 0% to 100% PWM control Oscillation frequency: 300kHz typ. Current Limit, Enable function Thermal Shutdown function
More informationSG2525A SG3525A REGULATING PULSE WIDTH MODULATORS
SG2525A SG3525A REGULATING PULSE WIDTH MODULATORS 8 TO 35 V OPERATION 5.1 V REFERENCE TRIMMED TO ± 1 % 100 Hz TO 500 KHz OSCILLATOR RANGE SEPARATE OSCILLATOR SYNC TERMINAL ADJUSTABLE DEADTIME CONTROL INTERNAL
More information100V - 100W DMOS AUDIO AMPLIFIER WITH MUTE/ST-BY THERMAL SHUTDOWN STBY-GND
TDA7294 100V - 100W DMOS AUDIO AMPLIFIER WITH MUTE/ST-BY VERY HIGH OPERATING VOLTAGE RANGE (±40V) DMOS POWER STAGE HIGH OUTPUT POWER (UP TO 100W MU- SIC POWER) MUTING/STAND-BY FUNCTIONS NO SWITCH ON/OFF
More informationPush-Pull FET Driver with Integrated Oscillator and Clock Output
19-3662; Rev 1; 5/7 Push-Pull FET Driver with Integrated Oscillator General Description The is a +4.5V to +15V push-pull, current-fed topology driver subsystem with an integrated oscillator for use in
More informationPulse Width Modulation Amplifiers EQUIVALENT CIRCUIT DIAGRAM. 200mV + - SMART CONTROLLER .01F OSC Q3. 2200pF
Pulse Width Modulation Amplifiers MSA MSA FEATURES LOW COST HIGH VOLTAGE VOLTS HIGH OUTPUT CURRENT AMPS kw OUTPUT CAPABILITY VARIABLE SWITCHING FREQUEY APPLICATIONS BRUSH MOTOR CONTROL MRI MAGNETIC BEARINGS
More informationSC728/SC729. 2A Low Vin, Very Low Ron Load Switch. POWER MANAGEMENT Features. Description. Applications. Typical Application Circuit SC728 / SC729
POWER MANAGEMT Features Input Voltage Range 1.1V to 2A Continuous Output Current Ultra-Low Ron 36mΩ Automatic Output Discharge Circuit Fast Turn-on Option With No Output Discharge Circuit SC728 Extended
More informationIS31LT3360 40V/1.2A LED DRIVER WITH INTERNAL SWITCH. January 2014
40V/1.2A LED DRIVER WITH INTERNAL SWITCH January 2014 GENERAL DESCRIPTION The IS31LT3360 is a continuous mode inductive step-down converter, designed for driving a single LED or multiple series connected
More information