1500 Watt Unidirectional and Bidirectional Transient Voltage Suppressor

Size: px
Start display at page:

Download "1500 Watt Unidirectional and Bidirectional Transient Voltage Suppressor"

Transcription

1 M.5KE6.8A M.5KE400CA(e3) Available 500 Watt Unidirectional and Bidirectional Transient Voltage Suppressor DESCRIPTION The popular Transient Voltage Suppressor series of M.5KE6.8 M.5KE400CA with its various upscreening options offer an extended voltage range and provides a wide variety of commercial, high reliability, RoHS and bidirectional options. All have the same high peak pulse power rating of 500 W and extremely fast response time. They can protect from secondary effects of lightning per IEC and the class levels as shown below as well as voltage transients from inductive switching and RFI. Since their response time is virtually instantaneous, they also protect from ESD and EFT per IEC and IEC Screening in reference to MIL-PRF-9500 available Important: For the latest information, visit our website FEATURES High reliability devices with fabrication and assembly lot traceability Economical plastic encapsulated TVS series for thru-hole mounting 3σ lot norm screening performed on standby current (I D ) 00% surge tested devices suppress transients up to 500 0/000 µs (see figure ) Enhanced reliability screening available in reference to MIL-PRF Refer to Hirel Non- Hermetic Product Portfolio for more details on the screening options. (See part nomenclature for all options.) Enhanced reliability source controlled devices have wafer fabrication and assembly lot traceability Moisture classification is Level with no dry pack required per IPC/JEDEC J-STD-020B RoHS compliant versions available Case Package APPLICATIONS / BENEFITS High-reliability devices Protection from switching and RFI induced transients Compliant to IEC and IEC for ESD and EFT protection respectively Secondary lightning protection per IEC with 42 ohms source impedance: Class : M.5KE6.8A to M.5KE200CA Class 2: M.5KE6.8A to M.5KE80CA Class 3: M.5KE6.8A to M.5KE9CA Class 4: M.5KE6.8A to M.5KE43CA Secondary lightning protection per IEC with 2 ohms source impedance: Class : M.5KE6.8A to M.5KE0CA Class 2: M.5KE6.8A to M.5KE56CA Class 3: M.5KE6.8A to M.5KE27CA Class 4: M.5KE6.8A to M.5KE3CA Secondary lightning protection per IEC with 2 ohms source impedance: Class 2: M.5KE6.8A to M.5KE24CA Class 3: M.5KE6.8A to M.5KE2CA MSC Lawrence 6 Lake Street, Lawrence, MA 084 Tel: or (978) Fax: (978) MSC Ireland Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) Fax: +353 (0) Website: RF0008, Rev. E (/5/3) 203 Microsemi Corporation Page of 7

2 M.5KE6.8A M.5KE400CA(e3) MAXIMUM RATINGS Parameters/Test Conditions Symbol Value Unit Junction and Storage Temperature T J and T STG -65 to +50 ºC Thermal Resistance, Junction to inch (0 R ӨJL 22 ºC/W mm) from body Thermal Resistance, Junction to Ambient () R ӨJA 82 ºC/W Peak Pulse T L = +25 ºC (2) P PP 500 W Rated Average Power T L = +40 T A = +25 ºC T clamping (0 volts to V (BR) min) Unidirectional Bidirectional P M(AV) 5.52 () W < 00 < 5 Surge Peak Forward Current (3) I FSM 200 A Solder 0 s T SP 260 o C Notes:. When mounted on FR4 PC board with 4 mm 2 copper pads ( oz) and track width mm, length 25 mm. 2. At 0/000 µs with repetition rate of 0.0% or less (see Figure ). 3. At 8.3 ms half-sine wave for unidirectional devices only. ps ns MECHANICAL and PACKAGING CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0 TERMINALS: Tin-lead or RoHS compliant annealed matte-tin plating readily solderable per MIL-STD-750 method 2026 MARKING: Part number and polarity band POLARITY: Cathode indicated by band. No cathode band on bidirectional devices. TAPE & REEL option: Standard per EIA-296 (add TR suffix to part number). Consult factory for quantities. WEIGHT: Approximately.5 grams See Package Dimensions on last page. PART NOMENCLATURE M.5 K E 6.5 C A (e3) Reliability Level* M MA MX MXL (*See Hirel Non-Hermetic Product Portfolio) Peak Pulse Power Kilowatt Rating Encapsulated Plastic Package RoHS Compliance e3 = RoHS compliant Blank = non-rohs compliant +/- 5% Tolerance Level Polarity C = Bi-directional Blank = Unidirectional Nominal Breakdown Voltage (See Electrical Characteristics table) RF0008, Rev. E (/5/3) 203 Microsemi Corporation Page 2 of 7

3 M.5KE6.8A M.5KE400CA(e3) SYMBOLS & DEFINITIONS Symbol Definition α V(BR) Temperature Coefficient of Breakdown Voltage: The change in breakdown voltage divided by the change in temperature that caused it expressed in %/ C or mv/ C. I (BR) Breakdown Current: The current used for measuring breakdown voltage V (BR). V (BR) Breakdown Voltage: The voltage across the device at a specified current I (BR) in the breakdown region. V WM Working Standoff Voltage: The maximum-rated value of dc or repetitive peak positive cathode-to-anode voltage that may be continuously applied over the standard operating temperature. V C Clamping Voltage: The voltage across the device in a region of low differential resistance during the application of an impulse current (I PP ) for a specified waveform. Peak Impulse Current: The maximum rated random recurring peak impulse current or nonrepetitive peak impulse I PP current that may be applied to a device. A random recurring or nonrepetitive transient current is usually due to an external cause, and it is assumed that its effect will have completely disappeared before the next transient arrives. P PP Peak Pulse Power. The rated random recurring peak impulse power or rated nonrepetitive peak impulse power. The impulse power is the maximum-rated value of the product of I PP and V C. Standby Current: The current through the device at rated stand-off voltage. I D RF0008, Rev. E (/5/3) 203 Microsemi Corporation Page 3 of 7

4 M.5KE6.8A M.5KE400CA(e3) Industry Type Number M.5KE6.8A M.5KE7.5A M.5KE8.2A M.5KE9.A M.5KE0A M.5KEA M.5KE2A M.5KE3A M.5KE5A M.5KE6A M.5KE8A M.5KE20A M.5KE22A M.5KE24A M.5KE27A M.5KE30A M.5KE33A M.5KE36A M.5KE39A M.5KE43A M.5KE47A M.5KE5A M.5KE56A M.5KE62A M.5KE68A M.5KE75A M.5KE82A M.5KE9A M.5KE00A M.5KE0A M.5KE20A M.5KE30A M.5KE50A M.5KE60A M.5KE70A M.5KE80A M.5KE200A M.5KE220A M.5KE250A M.5KE300A M.5KE350A M.5KE400A Rated Standoff Voltage V WM (Note ) Volts ELECTRICAL 25 o C Breakdown Voltage Clamping Voltage V I PP Standby Current I V WM Peak Pulse Current I PP (Fig. 2) Temperature Coefficient of V (BR) αv (BR) V I (BR) Volts Min. Max. ma Volts µa A %/ o C NOTES:. Normal selection criteria for TVS devices is by rated stand-off voltage (V WM ) and should be equal or greater than dc or continuous peak operating voltage. 2. TVS devices are tested to maximum peak pulse current (I PP ) with clamping voltage monitored. This surge capability is one of the most significant electrical characteristics of the device and should be considered as part of customer quality inspections. 3. For Bidirectional types having V WM of 8 volts and under, the I D leakage current is doubled. Also for bidirectional parts, the capacitance will be half that shown in Fig. 2 for zero bias. 4. For unidirectional, the forward voltage (V F ) is 3.5 volts maximum at 00 Amps peak for 8.3 ms half-sine wave. RF0008, Rev. E (/5/3) 203 Microsemi Corporation Page 4 of 7

5 M.5KE6.8A M.5KE400CA(e3) GRAPHS Pulse Time (tw) in µs FIGURE Peak Pulse Power vs Pulse Time (tw) in µs Pulse Current in Percent of IPP PPP - Peak Pulse Power - kw t Time ms Test waveform parameters: tr=0 µs, tp=000µs FIGURE 2 Pulse Waveform for 0/000 Exponential Surge RF0008, Rev. E (/5/3) 203 Microsemi Corporation Page 5 of 7

6 M.5KE6.8A M.5KE400CA(e3) GRAPHS (continued) Lead or Ambient Temperature C FIGURE 3 Derating Curve CT Capacitance Pico farads Peak Pulse Power (Ppp) or continuous Average Power in Percent of 25 C V (BR) Breakdown Voltage Volts FIGURE 4 Typical Capacitance vs. Breakdown Voltage RF0008, Rev. E (/5/3) 203 Microsemi Corporation Page 6 of 7

7 M.5KE6.8A M.5KE400CA(e3) PACKAGE DIMENSIONS NOTES: Dimensions are in inches. 2 Millimeter equivalents are given for information only. 3 The major diameter is essentially constant along its length. 4 In accordance with ASME Y4.5M, diameters are equivalent to Φx symbology. Dimensions Symbol Inches Millimeters Min Max Min Max BD BL LD LL RF0008, Rev. E (/5/3) 203 Microsemi Corporation Page 7 of 7

7.5 kw, Unidirectional and Bidirectional TVS Protection Device

7.5 kw, Unidirectional and Bidirectional TVS Protection Device Available 7.5 kw, Unidirectional and Bidirectional TVS Protection Device DESCRIPTION These 7.5 kw rated transient voltage suppressors (TVS) in a surface mount PLAD package are provided with design features

More information

Surface Mount 3000 Watt Transient Voltage Suppressor

Surface Mount 3000 Watt Transient Voltage Suppressor MSMLG5.0A MSMLG70CAe3, MSMLJ5.0 MSMLJ70CAe3 Available Surface Mount 3000 Watt Transient Voltage Suppressor DESCRIPTION The MSMLG(J)5.0A through MXLSMLG(J)70A series of high-reliability Transient Voltage

More information

Voidless Hermetically Sealed Bidirectional Transient Voltage Suppressors Qualified to MIL-PRF-19500/516

Voidless Hermetically Sealed Bidirectional Transient Voltage Suppressors Qualified to MIL-PRF-19500/516 Available on commercial versions Voidless Hermetically Sealed Bidirectional Transient Voltage Suppressors Qualified to MIL-PRF-19500/516 DESCRIPTION This series of industry recognized voidless, hermetically

More information

Silicon 2.0 Watt Zener Diodes

Silicon 2.0 Watt Zener Diodes Available Silicon Watt Zener Diodes DESCRIPTION The SMB(G/J)5913B SMB(G/J)5956B series of surface mount watt Zener diodes provides a selection from 3.3 to volts with tolerance options of %, 5% and 2%.

More information

CURRENT REGULATOR DIODES Qualified per MIL-PRF-19500/463

CURRENT REGULATOR DIODES Qualified per MIL-PRF-19500/463 Available on commercial versions CURRENT REGULATOR DIODES Qualified per MIL-PRF-19500/463 DESCRIPTION Qualified Levels: JAN, JANTX, JANTXV and JANS The popular 1N5283-1 thru 1N5314-1 series of 0.5 watt

More information

50 Watt Zener Diodes Qualified per MIL-PRF-19500/114

50 Watt Zener Diodes Qualified per MIL-PRF-19500/114 1N24B 1N2846RB and Available on commercial versions 50 Watt Zener Diodes Qualified per MIL-PRF-19500/114 Qualified Levels: JAN, JANTX, and JANTXV DESCRIPTION This series of high power 50W Zener diodes,

More information

6.2 & 6.55 Volt Zener Reference Diodes

6.2 & 6.55 Volt Zener Reference Diodes 1N81-1 1N89A-1 Available on commercial versions 6. & 6.55 Volt Zener Reference Diodes Qualified per MIL-PRF-19500/9 DESCRIPTION *Qualified Levels: JAN, JANTX, JANTXV and JANS (available on some part numbers)

More information

VOIDLESS HERMETICALLY SEALED SWITCHING DIODES Qualified per MIL-PRF-19500/578

VOIDLESS HERMETICALLY SEALED SWITCHING DIODES Qualified per MIL-PRF-19500/578 Available on commercial versions VOIDLESS HERMETICALLY SEALED SWITCHING DIODES Qualified per MIL-PRF-19500/578 DESCRIPTION These popular JEDEC registered switching/signal diodes are military qualified

More information

200 VOLTS,150 AMPS LOW REVERSE LEAKAGE SCHOTTKY DIODE

200 VOLTS,150 AMPS LOW REVERSE LEAKAGE SCHOTTKY DIODE Available on commercial versions 200 VOLTS,150 AMPS LOW REVERSE LEAKAGE SCHOTTKY DIODE DESCRIPTION The 1N6909UTK3AS device polarity is anode-to-strap (standard) and is also available optionally in 1N6909UTK3CS

More information

1N5518BUR-1 thru 1N5546BUR-1

1N5518BUR-1 thru 1N5546BUR-1 Available on commercial versions Low Voltage Avalanche 500 mw Zener Diodes Qualified per MIL-PRF-19500/437 DESCRIPTION The 1N5518BUR-1 thru 1N5546BUR-1 series of watt glass surface mount Zener voltage

More information

PNP SWITCHING SILICON TRANSISTOR Qualified per MIL-PRF-19500/290

PNP SWITCHING SILICON TRANSISTOR Qualified per MIL-PRF-19500/290 Available on commercial versions PNP SWITCHING SILICON TRANSISTOR Qualified per MIL-PRF-19500/290 Qualified Levels: JAN, JANTX, JANTXV and JANS DESCRIPTION This family of and A switching transistors are

More information

HIGH VOLTAGE TEMPERATURE COMPENSATED ZENER REFERENCE DIODES

HIGH VOLTAGE TEMPERATURE COMPENSATED ZENER REFERENCE DIODES Available HIGH VOLTAGE TEMPERATURE COMPENSATED ZENER REFERENCE DIODES DESCRIPTION The 1N4057 through 1N4085A series of temperature compensated reference diodes provides a wide selection of nominal voltages

More information

1.5SMC Series. Transient Voltage Suppression Diodes. Surface Mount 1500W > 1.5SMC series. Descriptios. Uni-directional

1.5SMC Series. Transient Voltage Suppression Diodes. Surface Mount 1500W > 1.5SMC series. Descriptios. Uni-directional 1.5SMC Series RoHS Pb e3 Uni-directional Descriptios Bi-directional The 1.5SMC series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and

More information

VOIDLESS HERMETICALLY SEALED STANDARD RECOVERY GLASS RECTIFIERS. Qualified to MIL-PRF-19500/420

VOIDLESS HERMETICALLY SEALED STANDARD RECOVERY GLASS RECTIFIERS. Qualified to MIL-PRF-19500/420 Available on commercial versions VOIDLESS HERMETICALLY SEALED STANDARD RECOVERY GLASS RECTIFIERS Qualified to MIL-PRF-19500/420 DESCRIPTION This standard recovery rectifier diode series is military qualified

More information

P-CHANNEL J-FET. 2N5114UB thru 2N5116UB. UB Package. Also available in: TO-18 package (leaded) 2N5114 2N5116

P-CHANNEL J-FET. 2N5114UB thru 2N5116UB. UB Package. Also available in: TO-18 package (leaded) 2N5114 2N5116 thru Available on commercial versions P-CHANNEL J-FET DESCRIPTION This low-profile surface mount device is available in military equivalents for high-reliability applications. Microsemi also offers numerous

More information

SLD8S Series RoHS Pb e3

SLD8S Series RoHS Pb e3 SLD8S Series RoHS Pb e3 Description The SLD8S Series is SMTO-263 packaged with leaded modification and is designed to provide precision overvoltage protection for sensitive electronics. Features Agency

More information

NPN MEDIUM POWER SILICON TRANSISTOR Qualified per MIL-PRF-19500/349

NPN MEDIUM POWER SILICON TRANSISTOR Qualified per MIL-PRF-19500/349 thru 2N3507AU4 Available on commercial versions NPN MEDIUM POWER SILICON TRANSISTOR Qualified per MIL-PRF-19500/349 DESCRIPTION Qualified Levels: JAN, JANTX and JANTXV This family of high-frequency, epitaxial

More information

1.5KE Series. Transient Voltage Suppression Diodes. Axial Leaded 1500W > 1.5KE series. Description

1.5KE Series. Transient Voltage Suppression Diodes. Axial Leaded 1500W > 1.5KE series. Description 1.5KE Series RoHS Pb e3 Description Uni-directional The 1.5KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient

More information

TPSMC Series. TVS Diodes Surface Mount 1500W > TPSMC series. Description. Uni-directional Bi-directional

TPSMC Series. TVS Diodes Surface Mount 1500W > TPSMC series. Description. Uni-directional Bi-directional TPSMC Series RoHS Pb e3 Uni-directional Bi-directional Description The TPSMC series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other

More information

P-CHANNEL MOSFET Qualified per MIL-PRF-19500/562

P-CHANNEL MOSFET Qualified per MIL-PRF-19500/562 Available on commercial versions P-CHANNEL MOSFET Qualified per MIL-PRF-19500/562 DESCRIPTION Qualified Levels: JAN, JANTX, and JANTXV This 2N6804 switching transistor is military qualified up to the JANTXV

More information

10 Watt Zener Diodes

10 Watt Zener Diodes Available on commercial versions Watt Zener Diodes Qualified per MIL-PRF-190/12 DESCRIPTION Qualified Levels: JAN, JANTX, and JANTXV The JEDEC registered 1N2970B through 1N015B and 1N99A through 1N998A

More information

P-CHANNEL J-FET. 2N5114 thru 2N5116. TO-18 (TO-206AA) Package. Also available in: UB package (surface mount) 2N5114UB 2N5116UB

P-CHANNEL J-FET. 2N5114 thru 2N5116. TO-18 (TO-206AA) Package. Also available in: UB package (surface mount) 2N5114UB 2N5116UB thru Available on commercial versions P-CHANNEL J-FET DESCRIPTION This leaded device is available in high-reliability equivalents for high-reliability applications. Microsemi also offers numerous other

More information

SA Series. Transient Voltage Suppression Diodes Axial Leaded 500W > SA series. Description

SA Series. Transient Voltage Suppression Diodes Axial Leaded 500W > SA series. Description SA Series RoHS Pb e3 Description Bi-directional The SA Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage

More information

High Temperature Stability and High Reliability Conditions FEATURES

High Temperature Stability and High Reliability Conditions FEATURES PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions MPG6 FEATURES Available in uni-directional polarity only 4 W peak pulse power capability with a / μs waveform,

More information

P6KE Series. Transient Voltage Suppression Diodes. Axial Leaded 600W > P6KE series. Description. Bi-directional

P6KE Series. Transient Voltage Suppression Diodes. Axial Leaded 600W > P6KE series. Description. Bi-directional P6KE Series RoHS Pb e3 Bi-directional Description The P6KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage

More information

SLD Series. Transient Voltage Suppression Diodes Axial Leaded 2200W > SLD series. Description. Uni-directional

SLD Series. Transient Voltage Suppression Diodes Axial Leaded 2200W > SLD series. Description. Uni-directional SLD Series RoHS Pb e3 Description The AEC-Q qualified SLD Series is packaged in a highly reliable industry standard P6 axial leaded package and is designed to provide precision overvoltage protection for

More information

5KP8.5A thru 5KP188A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES TYPICAL APPLICATIONS

5KP8.5A thru 5KP188A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.  FEATURES TYPICAL APPLICATIONS TRANSZORB Transient Voltage Suppressors P6 PRIMARY CHARACTERISTICS V WM 8.5 V to 188 V V BR 9.4 V to 231 V P PPM 5 W P D 8. W I FSM 5 A T J max. 175 C Polarity Uni-directional Package P6 FEATURES P6 glass

More information

QUAD N-CHANNEL MOSFET Qualified per MIL-PRF-19500/597

QUAD N-CHANNEL MOSFET Qualified per MIL-PRF-19500/597 Available on commercial versions QUAD N-CHANNEL MOSFET Qualified per MIL-PRF-19500/597 Qualified Levels: JAN, JANTX, and JANTXV DESCRIPTION This 2N7334 device is military qualified up to a JANTXV level

More information

P6KE6.8A thru P6KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. www.vishay.com FEATURES PRIMARY CHARACTERISTICS

P6KE6.8A thru P6KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. www.vishay.com FEATURES PRIMARY CHARACTERISTICS TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 540 V V BR bi-directional 6.8 V to 440 V P PPM 600 W P D 5.0 W I FSM (uni-directional

More information

General Purpose Plastic Rectifier

General Purpose Plastic Rectifier General Purpose Plastic Rectifier N400 thru N4007 DO-204AL (DO-4) FEATURES Low forward voltage drop Low leakage current High forward surge capability Solder dip 275 C max. s, per JESD 22-B6 Compliant to

More information

NS6A5.0AFT3G, SZNS6A5.0AFT3G Series. 500 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional

NS6A5.0AFT3G, SZNS6A5.0AFT3G Series. 500 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional NS6A5.0AFT3G, SZNS6A5.0AFT3G Series 500 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional The NS6AxxAFT3G series is designed to protect voltage sensitive components from high voltage,

More information

Surface Mount TRANSZORB Transient Voltage Suppressors

Surface Mount TRANSZORB Transient Voltage Suppressors Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.80 V to 188 V V BR uni-directional 6.8 V to 220 V V BR bi-directional 6.8 V to 220 V P PPM 600 W P D 5.0 W I FSM (uni-directional

More information

Unidirectional*

Unidirectional* Unidirectional* The P6KE6.8A series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability, low zener

More information

Photovoltaic Solar Cell Protection Schottky Rectifier

Photovoltaic Solar Cell Protection Schottky Rectifier VSB545-M3 Photovoltaic Solar Cell Protection Schottky Rectifier Ultra Low V F =.33 V at I F = 5. A TMBS FEATURES Trench MOS Schottky technology Low forward voltage drop, low power losses High efficiency

More information

N-CHANNEL MOSFET Qualified per MIL-PRF-19500/555

N-CHANNEL MOSFET Qualified per MIL-PRF-19500/555 and Available on commercial versio N-CHANNEL MOSFET Qualified per MIL-PRF-19500/555 DESCRIPTION Qualified Levels: JAN, JANTX, and JANTX These and devices are military qualified up to a JANTX level for

More information

PSOT03 - PSOT36C 500 WATT TVS ARRAY DESCRIPTION SOT-23 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATIONS

PSOT03 - PSOT36C 500 WATT TVS ARRAY DESCRIPTION SOT-23 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATIONS 500 WATT TVS ARRAY DESCRIPTION The PSOT series are transient voltage suppressor (TVS) arrays, designed for power or data line applications that provide protection against ESD, tertiary lightning and switching

More information

SDC15. TVS Diode Array for ESD Protection of 12V Data and Power Lines. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics

SDC15. TVS Diode Array for ESD Protection of 12V Data and Power Lines. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics Description The SDC15 transient voltage suppressor (TVS) is designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD),

More information

SMP6LC05-2P - SMP6LC24-2P

SMP6LC05-2P - SMP6LC24-2P MULTI-LINE low capacitance TVS ARRAY Description The SMP6LCxx-2P Series are high powered multi-line low capacitance transient voltage suppressor arrays that provides board level protection for standard

More information

Distributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. 15 Watt Mosorb Zener Transient Voltage Suppressors Unidirectional* Mosorb

More information

1SMC5.0AT3G Series, SZ1SMC5.0AT3G Series Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional*

1SMC5.0AT3G Series, SZ1SMC5.0AT3G Series Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional* SMC.0AT3G Series, SZSMC.0AT3G Series 00 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional* The SMC series is designed to protect voltage sensitive components from high voltage, high energy

More information

P6SMB Series SMB/DO-214AA. Mechanical Data. Maximum Ratings and Electrical Characteristics. Page <1> 19/05/08 V1.1

P6SMB Series SMB/DO-214AA. Mechanical Data. Maximum Ratings and Electrical Characteristics. Page <1> 19/05/08 V1.1 Features: For surface mounted application in order to optimize board space. Low profile package. Built-in strain relief. Glass passivated junction. Excellent clamping capability. Fast response time: typically

More information

UF4001, UF4002, UF4003, UF4004, UF4005, UF4006, UF4007 Ultrafast Plastic Rectifier

UF4001, UF4002, UF4003, UF4004, UF4005, UF4006, UF4007  Ultrafast Plastic Rectifier UF400, UF4002, UF4003, UF4004, UF4005, UF4006, UF4007 Ultrafast Plastic Rectifier FEATURES Glass passivated chip junction Ultrafast reverse recovery time Low forward voltage drop Low switching losses,

More information

General Purpose Plastic Rectifier

General Purpose Plastic Rectifier General Purpose Plastic Rectifier N400 thru N4007 DO-204AL (DO-4) FEATURES Low forward voltage drop Low leakage current High forward surge capability Solder dip 275 C max. s, per JESD 22-B6 Compliant to

More information

SDC15. TVS Diode Array for ESD Protection of 12V Data and Power Lines. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics

SDC15. TVS Diode Array for ESD Protection of 12V Data and Power Lines. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics Description The SDC15 transient voltage suppressor (TVS) is designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD),

More information

400W, 5V - 188V Surface Mount Transient Voltage Suppressor

400W, 5V - 188V Surface Mount Transient Voltage Suppressor 400W, 5V - 188V Surface Mount Transient Voltage Suppressor FEATURES - Low profile package - Ideal for automated placement - Glass passivated junction - Excellent clamping capability - Fast response time:

More information

Steering Diode Structure ESD Protection Array

Steering Diode Structure ESD Protection Array Steering Diode Structure ESD Protection Array FEATURES - Meet IEC61-4-2 (ESD) ±15k (air), ±8k (contact) - Meet IEC61-4-4 (EFT) rating. 4A (5/5ns) - Protects two directional I/O lines - Working voltage:

More information

Surface Mount Standard Rectifiers

Surface Mount Standard Rectifiers Surface Mount Standard Rectifiers Top view esmp Series DO-29AB (SMF) PRIMARY CHARACTERISTICS I F(AV).0 A V RRM 200 V, 400 V, 600 V I FSM 25 A V F at I F =.0 A (T A = 25 C) 0.85 V I R 5 μa T J max. 75 C

More information

STIEC45-xxAS, STIEC45-xxACS

STIEC45-xxAS, STIEC45-xxACS Transil TVS for IEC 61000-4-5 compliance Datasheet - production data differential mode MIL STD 883G, method 3015-7 Class 3B 25 kv HBM (human body model) Resin meets UL 94, V0 MIL-STD-750, method 2026 solderability

More information

PSSB05P. USB 3.0 Interface HDMI 1.4 Gigabit Ethernet esata

PSSB05P. USB 3.0 Interface HDMI 1.4 Gigabit Ethernet esata ultra LOW CAPACITANCE - super speed bus protection - TVS ARRAY Description The is an ultra low capacitance transient voltage suppressor array, designed to protect super speed bus applications such as USB

More information

1.5SMC6.8AT3G Series, SZ1.5SMC6.8AT3G Series. 1500 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional*

1.5SMC6.8AT3G Series, SZ1.5SMC6.8AT3G Series. 1500 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional* .6.8AT3G Series, SZ.6.8AT3G Series 00 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional* The series is designed to protect voltage sensitive components from high voltage, high energy transients.

More information

High Current Density Surface Mount Schottky Barrier Rectifiers

High Current Density Surface Mount Schottky Barrier Rectifiers SS0P3, SS0P4 High Current Density Surface Mount Schottky Barrier Rectifiers esmp Series TO-77A (SMPC) Anode Cathode Anode FEATURES Very low profile - typical height of. mm Ideal for automated placement

More information

High Current Density Surface Mount MOS Barrier Schottky Rectifier Ultra Low

High Current Density Surface Mount MOS Barrier Schottky Rectifier Ultra Low V0P0 High Current Density Surface Mount MOS Barrier Schottky Rectifier Ultra Low V F = 0.453 V at I F = 5 A TMBS esmp Series Anode Cathode Anode FEATURES Very low profile - typical height of. mm Available

More information

PTVSLC3D5VB Low Capacitance TVS

PTVSLC3D5VB Low Capacitance TVS Low Capacitance TVS Description The is a low capacitance transient voltage suppressor for high speed data interface that designed to protect sensitive electronics from damage or latch-up due to ESD lightning,

More information

B220/A - B260/A. Features. Mechanical Data. Ordering Information (Note 4) Marking Information 2.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER

B220/A - B260/A. Features. Mechanical Data. Ordering Information (Note 4) Marking Information 2.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER Green 2.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER Features Mechanical Data Guard Ring Die Construction for Transient Protection Ideally Suited for Automated Assembly Low Power-Loss, High Efficiency Surge

More information

1.5KE6.8A thru 1.5KE540A, 1N6267A thru 1N6303A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. www.vishay.

1.5KE6.8A thru 1.5KE540A, 1N6267A thru 1N6303A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. www.vishay. TRANSZORB Transient Voltage Suppressors Case Style.5KE FEATURES Glass passivated chip junction Available in uni-directional and bi-directional 500 W peak pulse power capability with a /0 μs waveform, repetitive

More information

NPN Darlington Power Silicon Transistor

NPN Darlington Power Silicon Transistor Available NPN Darlington Power Silicon Transistor Qualified per MIL-PRF-19500/539 DESCRIPTION This high speed NPN transistor is rated at 8 amps and is military qualified up to a JANTX level. This TO-213AA

More information

Distributed by: www.jameco.com -800-83-4242 The content and copyrights of the attached material are the property of its owner. Surface Mount Schottky Barrier Rectifier FEATURES Low profile package Ideal

More information

PDS5100H. Product Summary. Features and Benefits. Mechanical Data. Description and Applications. Ordering Information (Note 5) Marking Information

PDS5100H. Product Summary. Features and Benefits. Mechanical Data. Description and Applications. Ordering Information (Note 5) Marking Information Green 5A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER POWERDI 5 Product Summary I F V R V F MAX (V) I R MAX (ma) (V) (A) @ +25 C @ +25 C 1 5..71.35 Description and Applications This Schottky Barrier Rectifier

More information

Meets UL 94V-0 flammability rating Plated axial leads, solderable per MIL-STD-750, Method 2026 Cathode indicated by color band except Bi-directional

Meets UL 94V-0 flammability rating Plated axial leads, solderable per MIL-STD-750, Method 2026 Cathode indicated by color band except Bi-directional 600W Surface Mount Transient Voltage Suppressor Features SMB Stand-off voltage from 5.0 to 440 volts 600W Peak Pulse Power capability on 10/1000 μs waveform repetition rate(duty cycle): 0.01% Fast response

More information

High Current Density Surface Mount High Voltage Schottky Rectifier

High Current Density Surface Mount High Voltage Schottky Rectifier High Current Density Surface Mount High Voltage Schottky Rectifier SS8PH9, SS8PH0 FEATURES esmp Series Very low profile - typical height of. mm Available Ideal for automated placement Guardring for overvoltage

More information

UF4001, UF4002, UF4003, UF4004, UF4005, UF4006, UF4007 Ultrafast Plastic Rectifier

UF4001, UF4002, UF4003, UF4004, UF4005, UF4006, UF4007  Ultrafast Plastic Rectifier UF400, UF4002, UF4003, UF4004, UF4005, UF4006, UF4007 Ultrafast Plastic Rectifier FEATURES Glass passivated chip junction Ultrafast reverse recovery time Low forward voltage drop Low switching losses,

More information

SMD TVS Arrays TVT5V6AW-TVT6V8AW. SMD TVS Arrays. Features. Applications. Mechanical Data. Maximum Ratings (T Ambient =25ºC unless noted otherwise)

SMD TVS Arrays TVT5V6AW-TVT6V8AW. SMD TVS Arrays. Features. Applications. Mechanical Data. Maximum Ratings (T Ambient =25ºC unless noted otherwise) SMD TVS Arrays Features Working peak reverse voltage range 5.6 to 6.8V Max. leakage current of 5µA IEC 61000-4-2 compliance 15kV Air, 8kV contact discharge RoHS Compliant SOT-23 Applications Data Transmission

More information

Fast Avalanche SMD Rectifier

Fast Avalanche SMD Rectifier BYG2K-E3/HE3, BYG2M-E3/HE3 Fast Avalanche SMD Rectifier DO-24AC (SMA) PRIMARY CHARACTERISTICS I F(AV).5 A V RRM 8 V, V I FSM 3 A I R. μa V F.6 V t rr 2 ns E R 2 mj T J max. 5 C Package DO-24AC (SMA) Diode

More information

SM712. Asymmetrical TVS Diode for Extended Common-Mode RS-485. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.

SM712. Asymmetrical TVS Diode for Extended Common-Mode RS-485. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics. Description The SM712 transient voltage suppressor (TVS) diode is designed for asymmetrical (12V to 7V ) protection in multipoint data transmission standard RS485 applications. The SM712 may be used to

More information

TAK CHEONG. 1N4728A through 1N4763A Series. 1 Watt DO-41 Hermetically Sealed Glass Zener Voltage Regulators. Maximum Ratings. Specification Features

TAK CHEONG. 1N4728A through 1N4763A Series. 1 Watt DO-41 Hermetically Sealed Glass Zener Voltage Regulators. Maximum Ratings. Specification Features TAK CHEONG Watt DO-4 Hermetically Sealed Glass Zener Voltage Regulators Maximum Ratings Rating Symbol Value Unit Maximum Steady State Power Dissipation @ T L C, Lead Length = 3/8 Derate Above C Operating

More information

Bi-directional ESD Protection Diode

Bi-directional ESD Protection Diode // Bi-directional ESD Protection Diode FEATURES - Meet IEC6-4-2 (ESD) ±15k (air), ±8k (contact) - Designed for mounting on small surface - Protects one Bi-directional I/O line - Moisture sensitivity level

More information

PLR0522 STEERING DIODE/TVS ARRAY DESCRIPTION FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS CIRCUIT DIAGRAM

PLR0522 STEERING DIODE/TVS ARRAY DESCRIPTION FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS CIRCUIT DIAGRAM STEERING DIODE/TVS ARRAY DESCRIPTION The is an ultra low capacitance steering diode/tvs array. This device is designed to protect computing applications such as gigabit Ethernet, HDMI, USB and DVI interfaces

More information

SLVU2.8-4 Low Capacitance TVS Array

SLVU2.8-4 Low Capacitance TVS Array Low Capacitance TVS Array Description The is low capacitance transient voltage suppressor for high speed data interface that designed to protect sensitive electronics from damage or latch-up due to ESD

More information

Ultrafast Avalanche SMD Rectifier

Ultrafast Avalanche SMD Rectifier BYG2D, BYG2G, BYG2J Ultrafast Avalanche SMD Rectifier DO-24AC (SMA) FEATURES Low profile package Ideal for automated placement Glass passivated pellet chip junction Low reverse current Soft recovery characteristics

More information

SM712 Series 600W Asymmetrical TVS Diode Array

SM712 Series 600W Asymmetrical TVS Diode Array SM712 Series 6W Asymmetrical TVS Diode Array RoHS Pb GREEN Description The SM712 TVS Diode Array is designed to protect RS-485 applications with asymmetrical working voltages (-7V to from damage due to

More information

1SMA5.0AT3G Series, SZ1SMA5.0AT3G Series. 400 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional

1SMA5.0AT3G Series, SZ1SMA5.0AT3G Series. 400 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional .AT3G Series, SZ.AT3G Series 4 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional The series is designed to protect voltage sensitive components from high voltage, high energy transients.

More information

Low-Voltage Trench MOS Barrier Schottky Rectifier

Low-Voltage Trench MOS Barrier Schottky Rectifier Low-Voltage Trench MOS Barrier Schottky Rectifier Ultra Low V F = 0.26 V at I F = 5 A TMBS esmp Series 2 Top View PIN PIN 2 K K HEATSINK Bottom View FEATURES Trench MOS Schottky technology Very low profile

More information

PSSB05P. USB 3.0 Interface HDMI 1.4 Gigabit Ethernet esata

PSSB05P. USB 3.0 Interface HDMI 1.4 Gigabit Ethernet esata ultra LOW CAPACITANCE - super speed bus protection - TVS ARRAY Description The is an ultra low capacitance transient voltage suppressor array, designed to protect super speed bus applications such as USB

More information

TVJ10B5V0-HF Thru. TVJ10B430-HF

TVJ10B5V0-HF Thru. TVJ10B430-HF TVJ5V-HF Thru. TVJ43-HF Voltage: 5. ~ 43 Volts Peak Pulse Power: atts RoHS Device Halogen Free Features -Glass passivated chip. -Low leakage. -Uni and idirectional unit. -Excellent clamping capability.

More information

SR12 RailClamp Low Capacitance TVS Diode Array

SR12 RailClamp Low Capacitance TVS Diode Array Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The SR12 has been specifically designed to protect sensitive components which are connected to data and

More information

SDC36. TVS Diode Array for Proximity Switch Input Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.

SDC36. TVS Diode Array for Proximity Switch Input Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics. Description The SDC36 is a highsurge transient voltage suppressor (TS) optimized for protection of sensitive digital sensors used in proximity switches and industrial control applications. The SDC36 protects

More information

SLVU2.8-4L Low Capacitance TVS Array

SLVU2.8-4L Low Capacitance TVS Array Low Capacitance TVS Array Description The is low capacitance transient voltage suppressor for high speed data interface that designed to protect sensitive electronics from damage or latch-up due to ESD

More information

NPN Darlington Power Silicon Transistor Qualified per MIL-PRF-19500/472

NPN Darlington Power Silicon Transistor Qualified per MIL-PRF-19500/472 and Available on commercial versions NPN Darlington Power Silicon Transistor Qualified per MIL-PRF-19500/472 DESCRIPTION Qualified Levels: JAN, JANTX, and JANTX This high speed NPN transistor is military

More information

600W, 5V - 170V Surface Mount Transient Voltage Suppressor

600W, 5V - 170V Surface Mount Transient Voltage Suppressor CREAT BY ART 600W, 5V - 170V Surface Mount Transient Suppressor FEATURES - Low profile package - Ideal for automated placement - Glass passivated junction - Excellent clamping capability - Fast response

More information

1SMB59xxBT3G Series, SZ1SMB59xxT3G Series. 3 Watt Plastic Surface Mount Zener Voltage Regulators

1SMB59xxBT3G Series, SZ1SMB59xxT3G Series. 3 Watt Plastic Surface Mount Zener Voltage Regulators 9xxBTG Series, SZ9xxTG Series Watt Plastic Surface Mount Zener Voltage Regulators This complete new line of W Zener diodes offers the following advantages. Features Zener Voltage Range. V to V ESD Rating

More information

SMAJ Series. Features: Mechanical Data. Max. Ratings and Electrical Characteristics.

SMAJ Series. Features: Mechanical Data. Max. Ratings and Electrical Characteristics. Features: Low profile package Ideal for automated placement Glass passivated junction Built-in strain relief Excellent clamping capability Fast response time : Typically less than 1.0ps from 0 volt to

More information

PLCDA03 - PLCDA WATT MULTI-LINE ultra LOW CAPACITANCE TVS ARRAY PIN CONFIGURATION

PLCDA03 - PLCDA WATT MULTI-LINE ultra LOW CAPACITANCE TVS ARRAY PIN CONFIGURATION 5 WATT MULTI-LINE ultra LOW CAPACITANCE TVS ARRAY Description The PLCDAxx Series are ultra low capacitance multi-line transient voltage suppressor arrays that provides board level protection for standard

More information

Surface Mount TRANSZORB Transient Voltage Suppressors

Surface Mount TRANSZORB Transient Voltage Suppressors Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR (bi-directional) 6.4 V to 231 V V BR (uni-directional) 6.4 V to 231 V V WM 5.0 V to 188 V P PPM 400 W, 300 W I FSM 40

More information

Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. SM6T6V8A/220A SM6T6V8CA/220CA TRANSIL TM FEATURES PEAK PULSE POWER : 600

More information

MAD Series. High Frequency Data Lines RS-232 & RS-422 Interface Networks Ethernet 10/100 Base T Computer I/O Ports

MAD Series. High Frequency Data Lines RS-232 & RS-422 Interface Networks Ethernet 10/100 Base T Computer I/O Ports 056 ultra low capacitance multi-line steering diode array Description The are a low distortion steering diodes. These devices are intended for use in high frequency analog or digital data I/O ports for

More information

uclamp1201p μclamp TM 1-Line ESD protection PROTECTION PRODUCTS - MicroClamp TM Description Features Mechanical Characteristics Applications

uclamp1201p μclamp TM 1-Line ESD protection PROTECTION PRODUCTS - MicroClamp TM Description Features Mechanical Characteristics Applications - MicroClamp TM Description The μclamp TM series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD. It is designed to replace multilayer varistors (MLVs) in

More information

RClamp0582BQ. Low Capacitance TVS for Automotive Applications. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics

RClamp0582BQ. Low Capacitance TVS for Automotive Applications. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics - RailClamp Description The RClamp 582BQ transient voltage suppressor is specifically designed to protect sensitive components which are connected to high-speed data and transmission lines from overvoltage

More information

PTVSHC3D5VU Transient Voltage Suppressor

PTVSHC3D5VU Transient Voltage Suppressor Transient Voltage Suppressor Description The ESD protector is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and PDA s. They feature large

More information

Surface Mount TRANSZORB Transient Voltage Suppressors

Surface Mount TRANSZORB Transient Voltage Suppressors Surface Mount TRANSZORB Transient Voltage Suppressors DO-214AA (SMB J-Bend) PRIMARY CHARACTERISTICS V BR (bi-directional) 6.4 V to 231 V V BR (uni-directional) 6.4 V to 231 V V WM 5.0 V to 188 V P PPM

More information

Ultrafast Rectifier, 2 x 8 A FRED Pt

Ultrafast Rectifier, 2 x 8 A FRED Pt Ultrafast Rectifier, 2 x 8 A FRED Pt 2 K Top View Bottom View K Anode Cathode Anode 2 FEATURES Ultrafast recovery time, reduced Q rr, and soft recovery 75 C maximum operating junction temperature For PFC

More information

SR70. ultra low capacitance steering diode array. Description. applications. USB Interface Ports POE Applications Video Handheld Electronics Laptops

SR70. ultra low capacitance steering diode array. Description. applications. USB Interface Ports POE Applications Video Handheld Electronics Laptops ultra low capacitance steering diode array Description The is an ultra low capacitance steering diode array. Designed for protection against Electrostatic Discharge (ESD), Electrical Fast Transients (EFT)

More information

SM05. Low Capacitance Quad Line ESD Protection Diode Arry SM05 SOT23-3. General Description. Rev.04 Oct.

SM05. Low Capacitance Quad Line ESD Protection Diode Arry SM05 SOT23-3. General Description.  Rev.04 Oct. Low Capacitance Quad Line ESD Protection Diode Arry SM05 SOT23-3 General Description The SM05 of transient voltage suppressors (TVS) are designed to protect components which are connected to data and transmission

More information

Surface Mount TRANSZORB Transient Voltage Suppressors

Surface Mount TRANSZORB Transient Voltage Suppressors Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR uni-directional 6.40 V to 231 V V BR bi-directional 6.40 V to 231 V V WM 5.0 V to 188 V P PPM 400 W, 300 W I FSM 40 A

More information

Surface Mount Ultrafast Rectifier

Surface Mount Ultrafast Rectifier USA, USB, USD, USG, USJ, USK, USM Surface Mount Ultrafast Rectifier DO-24AC (SMA) PRIMARY CHARACTERISTICS I F(AV).0 A 50 V, 0 V, 200 V, 400 V, 600 V, V RRM 800 V, 00 V I FSM 30 A t rr 50 ns, 75 ns V F

More information

RClamp2402B. Ultra-Low Capacitance TVS for ESD and CDE Protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics

RClamp2402B. Ultra-Low Capacitance TVS for ESD and CDE Protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics - RailClamp Description RailClamps are ultra low capacitance TS arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are

More information

SM712 Series 600W Asymmetrical TVS Diode Array

SM712 Series 600W Asymmetrical TVS Diode Array SM712 Series 6W Asymmetrical TVS Diode Array RoHS Pb GREEN Description The SM712 TVS Diode Array is designed to protect RS-485 applications with asymmetrical working voltages (-7V to from damage due to

More information

Ultrafast Rectifier, 2 A FRED Pt

Ultrafast Rectifier, 2 A FRED Pt Ultrafast Rectifier, 2 A FRED Pt DO-29AB (SMF) Cathode Anode FEATURES Ultrafast recovery time, reduced Q rr, and soft recovery 75 C maximum operating junction temperature For PCF CRM, snubber operation

More information

SMF05T2G. Quad Array for ESD Protection

SMF05T2G. Quad Array for ESD Protection Quad Array for ESD Protection ESD Protection Diodes with Low Clamping Voltage This quad monolithic silicon voltage suppressor is designed for applications requiring transient overvoltage protection capability.

More information

Surface Mount Ultrafast Plastic Rectifier

Surface Mount Ultrafast Plastic Rectifier Surface Mount Ultrafast Plastic Rectifier DO-24AA (SMB) PRIMARY CHARACTERISTICS I F(AV) 2. A V RRM 3 V, 4 V I FSM 5 A t rr 35 ns V F at I F. V T J max. 5 C Package DO-24AA (SMB) Diode variations Single

More information

uclamp0508t Low Profile μclamp TM 8-Line ESD protection PROTECTION PRODUCTS - MicroClamp TM Description Features Mechanical Characteristics

uclamp0508t Low Profile μclamp TM 8-Line ESD protection PROTECTION PRODUCTS - MicroClamp TM Description Features Mechanical Characteristics - MicroClamp TM Description The μclamp TM series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD. It is designed to replace multilayer varistors (MLVs) in

More information