SignalSure 75. Mid power solution. Automotive. SignalSure 75 is a compact, surface-mount, mid power LED signaling
|
|
|
- Gordon Henry
- 7 years ago
- Views:
Transcription
1 Automotive SignalSure 75 Mid power solution SignalSure 75 is a compact, surface-mount, mid power LED signaling solution that delivers an elevated standard of light output, flux density, and color uniformity. SignalSure s robust design structure, coupled with high performance specifications, ensures high quality and reliability. SignalSure 75 is AEC-Q101D qualified. SignalSure 75 is available in the following color wavelengths: Amber (591nm Red Orange (615nm Super Red (630nm Super Red (635nm Features and Benefits Higher drive current capability for increased flux performance Low thermal resistance for better hot lumen performance Primary ApplicationS Mirror/Side Repeater Stop/Tail Standard packaging for low cost and ease of manufacturability CHMSL Available in 591nm, 615nm, 630nm and 635nm colors for increased design options Turn AEC-Q101D qualified DS126 SignalSure 75 Product Datasheet 2016 Lumileds Holding B.V. All rights reserved. RoHS COMPLIANT
2 Table of Contents General Product Information...2 Product Test Conditions...2 Part Number Nomenclature...2 Environmental Compliance...2 Performance Characteristics...3 Product Selection Guide....3 Optical Characteristics...3 Electrical and Thermal Characteristics....3 Absolute Ratings...4 Characteristic Curves...4 Spectral Power Distribution Characteristics...4 Light Output Characteristics...5 Forward Current Characteristics....6 Radiation Pattern Characteristics...7 Operating Limits Characteristics....7 Permissible Pulse Handling Characteristics...8 Product Bin and Labeling Definitions...9 Designing with SignalSure...9 Decoding Product Bin Labeling....9 Luminous Flux Bins...10 Color Codes...11 Forward Voltage Bins...11 Mechanical Dimensions Reflow Soldering Guidelines...13 JEDEC Moisture Sensitivity...13 Solder Pad Design...14 Packaging Information Pocket Tape Dimensions...15 Reel Dimensions...15 Product Labeling...16 DS126 SignalSure 75 Product Datasheet Lumileds Holding B.V. All rights reserved. i
3 General Product Information Product Test Conditions SignalSure 75 LEDs are tested and binned using a 20ms monopulse (MP at 75mA drive current, junction temperature, T j, of 25ºC. Part Number Nomenclature Part numbers for SignalSure 75 follow the convention below: Where: A 1 D P B C C C L D 7 E F G H 0 0 B designates color (A=Amber, O=Red Orange and S=Super Red C C C designates minimum dominant wavelength (588=588nm, 612=612nm, 627=627nm and 632=632nm D designates the binning condition (1=single binning (75mA, 8=dual binning (75mA and 5mA E designates minimum flux bin (See Product Bin and Labeling section F designates flux bin range (3=3 subsequent flux bins including the minimum bin G H designates forward voltage range in which G is the minimum V f bin and H is the maximum V f bin (See Product Bin and Labeling Definitions section Therefore, the following part number is used for a SignalSure 75 Super Red, 632nm minimum wavelength, single binned at 75mA, luminous flux range of 5.1 lumens to 8.7 lumens and forward voltage range of 2.07 volts to 2.67 volts: A 1 D P S L 1 7 C 3 A E 0 0 Environmental Compliance Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. SignalSure 75 is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS Directive 2011/65/EU and REACH Regulation (EC 1907/2006. Lumileds LLC will not intentionally add the following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB or polybrominated diphenyl ethers (PBDE. DS126 SignalSure 75 Product Datasheet Lumileds Holding B.V. All rights reserved. 2
4 Performance Characteristics Product Selection Guide Table 1. Product selection for SignalSure 75 at 20ms MP, 75mA, T j COLOR DOMINANT WAVELENGTH [1,2] (nm Part Number Amber 591 A1DP - A588L Red Orange 615 A1DP - O612L Super Red 630 A1DP - S627L Super Red 635 A1DP - S632L Notes for Table 1: 1. Dominant wavelength is derived from the CIE 1931 Chromaticity diagram and represents perceived color. 2. Lumileds maintains a tolerance of ±1nm for dominant wavelength measurements. Optical Characteristics Table 2. Typical optical characteristics for SignalSure 75 at 20ms MP, 75mA, T j Part Number Typical Total Included Angle [1] θ 0.90V Typical Viewing Angle [2] 2θ 1/2 A1DP - A588L A1DP - O612L A1DP - S627L A1DP - S632L Notes for Table 2: 1. Total angle at which 90% of total luminous flux is captured. 2. Viewing angle is the off axis angle from theled center line where the luminous intensity is ½ of the peak value. Electrical and Thermal Characteristics Table 3. Typical electrical and thermal characteristics for SignalSure 75 at 20ms MP, 75mA, T j Parameter Performance Forward Voltage, V f 2.35V Electrical Thermal Resistance, R th j-c electr [1] (Maximum Real Thermal Resistance, R th j-c real [2] (Maximum Temperature Coefficient of V f, I f = 75mA, 10 C Tc 110 C Notes for Table 3: 1. R th j-c electr : Electrical thermal resistance (junction to case. 2. R th j-c real : Real thermal resistance (junction to case with wall plug efficiency included. Reference JESD51-51, JESD51-14, C/W 60 C/W -3.9mV/ C DS126 SignalSure 75 Product Datasheet Lumileds Holding B.V. All rights reserved. 3
5 Absolute Ratings Table 4. Absolute ratings for SignalSure 75. Parameter Performance Minimum DC Forward Current Maximum DC Forward Current 5mA 90mA Maximum Junction Temperature [1] 135 C Operating Case Temperature at Test Current [1] -40 C to 115 C Operating Case Temperature at Maximum Current [1] -40 C to 115 C Storage Temperature -40 C to 115 C Soldering Temperature JEDEC 020c 260 C Allowable Reflow Cycles 3 Minimum ESD performance [2] 2kV HBM (Class 2, 1kV CDM (Class III Reverse Voltage (V r -10V Notes for Table 4: 1. Proper current derating must be observed to maintain junction temperature below the maximum, so that the LED is maintained below the maximum rated operating case temperature. SignalSure LEDs driven at or above the maximum rated operating case temperature may have shorter lifetime. 2. Measured using human body model (per ANSI/ESDA/JEDEC JS and charged device model (per JESD22-C101F. Characteristic Curves Spectral Power Distribution Characteristics Figure 1. Typical normalized power vs. wavelength for SignalSure 75 at 20ms MP, 75mA, T j =25ºC. DS126 SignalSure 75 Product Datasheet Lumileds Holding B.V. All rights reserved. 4
6 Light Output Characteristics Figure 2. Typical normalized light output vs. junction temperature for SignalSure 75 at 20ms MP, 75mA. Figure 3. Typical normalized light output vs. forward current for SignalSure 75 at T j =25ºC. DS126 SignalSure 75 Product Datasheet Lumileds Holding B.V. All rights reserved. 5
7 Forward Current Characteristics Figure 4a. Typical forward current vs. forward voltage for SignalSure 75 at T j =25ºC. Figure 4b. Typical forward voltage shift vs. junction temperature for SignalSure 75 at 20ms MP, specified test current. DS126 SignalSure 75 Product Datasheet Lumileds Holding B.V. All rights reserved. 6
8 Radiation Pattern Characteristics Figure 5. Typical radiation pattern for SignalSure 75 at 20ms MP, 75mA. Operating Limits Characteristics Forward Curent [ma] Do not use below 5mA Case Temperature [ C] Figure 6. Maximum forward current vs. case temperature for SignalSure 75. DS126 SignalSure 75 Product Datasheet Lumileds Holding B.V. All rights reserved. 7
9 Permissible Pulse Handling Characteristics Figure 7. Permissible pulse handling capability for SignalSure 75. DS126 SignalSure 75 Product Datasheet Lumileds Holding B.V. All rights reserved. 8
10 Product Bin and Labeling Definitions Designing with SignalSure Flux bins supportable for car programs depend on product color and program start- and end-of-production date. Flux roadmaps by year and product color are maintained and available from the sales representative. Please contact your local sales representative to request the flux bin range with best supportability for program timing. Decoding Product Bin Labeling In the manufacturing of semiconductor products, there are variations in performance around the average values given in the technical datasheets. For this reason, Lumileds bins the LED components for luminous flux, color and forward voltage. SignalSure 75 single binned LEDs are labeled using a 3-digit alphanumeric CAT code following the format below: A B C A designates luminous flux bin at 75mA (example: B=4.3 lumens to 5.1 lumens B designates color code (example: 3=612nm to 618nm C designates forward voltage bin at 75mA (example: B=2.19V to 2.31V SignalSure 75 dual binned LEDs are labeled using a 5-digit CAT code following the format below: A b C D e A designates luminous flux bin at 75mA (example: B=4.3 lumens to 5.1 lumens b designates luminous flux bin at 5mA (example: g=0.35 lumens to 0.42 lumens C designates color code (example: 3=612nm to 618nm D designates forward voltage bin at 75mA (example: B=2.19V to 2.31V e designates forward voltage bin at 5mA (example: b=1.72v to 1.78V DS126 SignalSure 75 Product Datasheet Lumileds Holding B.V. All rights reserved. 9
11 Luminous Flux Bins Table 5 lists the standard luminous flux bins for SignalSure 75 emitters. Product availability in a particular bin varies by color and platform start-of-production date. Contact your local sales representative for best supportability of programs. Table 5a. Luminous flux bin definitions for SignalSure 75 at 20ms MP, 75mA, T j Luminous Flux (lm Bin Minimum Maximum B C D E F G H Notes for Table 5a: 1. Lumileds maintains a tolerance of ±10% on luminous flux measurements. Table 5b. Luminous flux bin definitions for SignalSure 75 at 20ms MP, 5mA, T j Bin Minimum Luminous Flux (lm Maximum g h j m n p r u Notes for Table 5b: 1. Lumileds maintains a tolerance of ±10% on luminous flux measurements. 2. Applies to dual binning option only. Table 5c. Luminous flux bin pairing for SignalSure 75 at 20ms MP, 75mA and 5mA, T j BIN PAIRING Bin Minimum Luminous Flux (lm Maximum Luminous Flux (lm 75mA Notes for Table 5c: 1. Applies to dual binning option only. F g, h, j, m, n, p G h, j, m, n, p, r H j, m, n, p, r, u mA DS126 SignalSure 75 Product Datasheet Lumileds Holding B.V. All rights reserved. 10
12 Color Codes Table 6. Color code definitions for SignalSure 75 at 20ms MP, 75mA, T j CODE Minimum DOMINANT WAVELENGTH (nm Maximum Notes for Table 6: 1. Lumileds maintains a tolerance of ±1nm on dominant wavelength measurements. Forward Voltage Bins Table 7a. Forward voltage bin definitions for SignalSure 75 at 20ms MP, 75mA, T j Bin Minimum Forward Voltage (V f Maximum A B C D E F Notes for Table 7a: 1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. 2. Applies to dual binning option only. Table 7b. Forward voltage bin definitions for SignalSure 75 at 20ms MP, 5mA, T j Bin Minimum Forward Voltage (V f Maximum a b c d e f g h j Notes for Table 7b: 1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. 2. Applies to dual binning option only. DS126 SignalSure 75 Product Datasheet Lumileds Holding B.V. All rights reserved. 11
13 Table 7c. Forward voltage bin pairing for SignalSure 75 at 20ms MP, 75mA and 5mA, T j BIN Minimum Forward Voltage (V f 75mA Maximum Forward Voltage (V f PAIRING BIN Minimum Forward Voltage (V f Maximum Forward Voltage (V f A a, b, c, d B a, b, c, d, e C a, b, c, d, e, f D a, b, c, d, e, f, g E b, c, d, e, f, g, h F c, d, e, f, g, h, j Notes for Table 7c: 1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. 2. Applies to dual binning option only. 5mA Mechanical Dimensions Figure 8. Mechanical dimensions for SignalSure 75. Notes for Figure 8: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS126 SignalSure 75 Product Datasheet Lumileds Holding B.V. All rights reserved. 12
14 Reflow Soldering Guidelines Figure 9. Visualization of the acceptable reflow temperature profile as specified in Table 8. Table 8. Reflow profile characteristics for SignalSure 75. PROFILE FEATURE Lead Free Assembly Preheat Minimum Temperature (Ts min 150 C Preheat Maximim Temperature (Ts max 200 C Preheat Time (ts min to ts max Ramp-Up Rate (T L to T p 60 to 180 seconds 3 C / second maximum Liquidus Temperature (T L 217 C Time Maintained Above Temperature T L (t L 60 to 150 seconds Peak / Classification Temperature (T p 260 C Time Within 5 C of Actual Temperature (t p Ramp-Down Rate (T p to T L Time 25 C to Peak Temperature Notes for Table 8: 1. All temperatures refer to the application Printed Circuit Board (PCB, measured on the surface adjacent to the package body. 20 to 40 seconds 6 C / second maximum 8 minutes maximum JEDEC Moisture Sensitivity Table 9. Moisture sensitivity levels for SignalSure 75. Notes for Table 9: 1. Shelf life 2 years. level Floor Life [1] Soak Requirements Standard TIme Conditions Time Conditions 2 1 Year 30 C / 60% RH 168 Hours +5 / C / 60% RH DS126 SignalSure 75 Product Datasheet Lumileds Holding B.V. All rights reserved. 13
15 Solder Pad Design Figure 10. Recommended PCB solder pad layout for SignalSure 75. Notes for Figure 10: 1. The drawing shows the recommended SignalSure 75 layout on Printed Circuit Board (PCB. 2. All dimensions are in millimeters. DS126 SignalSure 75 Product Datasheet Lumileds Holding B.V. All rights reserved. 14
16 Packaging Information Pocket Tape Dimensions Figure 11. Pocket tape dimensions for SignalSure 75. Reel Dimensions Figure 12. Reel dimensions for SignalSure 75. Notes for Figures 11 and 12: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS126 SignalSure 75 Product Datasheet Lumileds Holding B.V. All rights reserved. 15
17 Product Labeling SignalSure 75 LEDs are packaged in moisture barrier bags on reels. Both moisture barrier bag and reels have printed information providing part numbers with CAT codes that indicate luminous flux bin, color bins and forward voltage bins. Figure 13. Examle of a moisture barrier bag label. Figure 14. Example of a product reel label. DS126 SignalSure 75 Product Datasheet Lumileds Holding B.V. All rights reserved. 16
18 About Lumileds Lumileds is the global leader in light engine technology. The company develops, manufactures and distributes groundbreaking LEDs and automotive lighting products that shatter the status quo and help customers gain and maintain a competitive edge. With a rich history of industry firsts, Lumileds is uniquely positioned to deliver lighting advancements well into the future by maintaining an unwavering focus on quality, innovation and reliability. To learn more about our portfolio of light engines, visit lumileds.com Lumileds Holding B.V. All rights reserved. LUXEON is a registered trademark of the Lumileds Holding B.V. in the United States and other countries. lumileds.com DS126 SignalSure 75 Product Datasheet Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials and services information and data are provided as is, and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data.
Multiple colors, a single focal length
Illumination LUXEON C Color Line Multiple colors, a single focal length The LUXEON C Color Line is an optically advanced portfolio of Color and White LEDs. Designed for flawless color mixing, LUXEON C
High flux for outdoor applications
General Illumination LUXEON R High flux for outdoor applications LUXEON R brings illumination grade LED light sources to outdoor and industrial lighting applications and makes it easier than ever to design
LUXEON 5630 Mid-Power LEDs Illumination Portfolio
LUXEON 5630 Mid-Power LEDs Illumination Portfolio Introduction LUXEON 5630 delivers optimized performance in combination with quality of light needed for distributed light source applications. In addition
LUXEON TX Extreme efficacy that will transform your next market leading luminaire
LUXEON TX Extreme efficacy that will transform your next market leading luminaire Introduction LUXEON TX emitters are illumination grade LEDs designed to deliver high efficacy with high flux density to
LUXEON S. High Flux Density
LUXEON S Optimized solution for applications requiring high flux and tight beam control Technical Datasheet DS80 LUXEON S High Flux Density Introduction The LUXEON S emitters deliver uniform beam intensity
General Purpose White Portfolio
LUXEON Rebel General Purpose Portfolio High flux and color stability Technical Datasheet DS64 LUXEON Rebel General Purpose White Portfolio Introduction The LUXEON Rebel General Purpose White Portfolio
How To Understand And Understand The Design Of An Oxymoron Lamp
Technical Datasheet DS56 power light source LUXEON Rebel Introduction LUXEON Rebel is an ultra-compact, surface-mount, high-power LED that delivers elevated standards for light output, flux density and
MP-1919 XNOVA Cube TM SMD LED
MP-1919 XNOVA Cube TM SMD LED Features: Table of Contents Technology Overview.... 2 Product Selection Table... 3 Operating Characteristics.. 4 Chromaticity Binning.... 5 Chromaticity Diagram.... 6 Characteristic
Discontinued. LUXEON V Portable. power light source. Introduction
Preliminary Technical Datasheet DS40 power light source LUXEON V Portable Introduction LUXEON is a revolutionary, energy efficient and ultra compact new light source, combining the lifetime and reliability
Cree XLamp MX-6 LEDs Data Sheet
Cree XLamp MX-6 LEDs Data Sheet The Cree XLamp MX-6 LED provides the proven lighting-class performance and reliability of Cree XLamp LEDs in a flat-top PLCC package. The XLamp MX-6 LED continues Cree s
Cree XLamp XP-G LEDs Data Sheet
Cree XLamp XP-G LEDs Data Sheet The XLamp XP-G LED delivers unprecedented levels of light output and efficacy for a single die LED. The XLamp XP-G LED continues Cree s history of innovation in LEDs for
LUXEON Rebel and LUXEON Rebel ES Color Portfolio
LUXEON Rebel and LUXEON Rebel ES Color Portfolio Illuminating your creativity Technical Datasheet DS68 LUXEON Rebel and LUXEON Rebel ES Color Portfolio Introduction With leading light output, color stability,
SuperFlux LEDs. Leaded. Introduction. Features. Key Applications
SuperFlux LEDs Leaded This product is not RoHs compliant. For lead-free, use SuperFlux PB-Free in DS55. Introduction The popular through-hole package design allows lighting designers to reduce the number
LUXEON CoB with CrispWhite Technology Retail lighting that makes an impact
LUXEON CoB with CrispWhite Technology Retail lighting that makes an impact Introduction LUXEON CoB with CrispWhite Technology delivers the warm saturated colors of high 90 CRI solutions while creating
Cree XLamp MX-3S LEDs Data Sheet
Cree XLamp MX-3S LEDs Data Sheet The Cree XLamp MX-3S LED provides the proven lighting-class performance and reliability of Cree XLamp LEDs in a high voltage, PLCC configuration. All members of the MX-family
Available in white (2,600 K to 8,300 K CCT) Maximum drive current: 1000 ma. Wide viewing angle: 120. Electrically neutral thermal path
PRODUCT FAMILY DATA SHEET CLD-23 REV 3 Cree XLamp MX-6 LEDs PRODUCT DESCRIPTION The Cree XLamp MX-6 LED provides the proven lighting-class performance and reliability of Cree XLamp LEDs in a flat-top PLCC
LUXEON Altilon. Functional solution for forward lighting systems AUTOMOTIVE
AUTOMOTIVE LUXEON Altilon Functional solution for forward lighting systems LUXEON Altilon delivers distinctive brilliant white light for your automotive forward lighting designs. LUXEON Altilon is designed
2016 Mid Power LED. 2016 Mid Power Product Datasheet. Features: Table of Contents. Applications
2016 Mid Power LED Table of Contents Technology Overview.... 2 Product Selection Table... 3 Operating Characteristics.. 4 Chromaticity Diagram.... 5 Color Ranks.... 5 Features: High efficacy CRI Options:
Cree XLamp XR-C LEDs PRODUCT FAMILY DATA SHEET PRODUCT DESCRIPTION FEATURES TABLE OF CONTENTS CLD DS10 REV7
PRODUCT FAMILY DATA SHEET CLD DS1 REV7 Cree XLamp XR-C LEDs PRODUCT DESCRIPTION FEATURES TABLE OF CONTENTS WWW. CREE.COM/XLAMP The XLamp XP-E LED combines the proven lighting-class performance and reliability
Product family data sheet
Cree XLamp MX-6 LEDs Product family data sheet CLD-DS23 Rev 3A Product Description The Cree XLamp MX-6 LED provides the proven lightingclass performance and reliability of Cree XLamp LEDs in a flat-top
Cree XLamp XR-E LED. Table of Contents. CLD-DS05 Rev 16B. Product family data sheet
Cree XLamp XR-E LED Product family data sheet CLD-DS05 Rev 16B Product Description The XLamp XR-E LED is leading the LED lighting revolution with its unprecedented lighting-class brightness, efficacy,
Bridgelux ES Array Series
Bridgelux ES Array Series Product Data Sheet Introduction The Bridgelux family of LED Array products delivers high performance, compact and cost-effective solidstate lighting solutions to serve the general
Features. Typical Applications G9. ProLight PEA2-3FVE 3W Warm White AC LED Technical Datasheet Version: 1.7 1 DS-0042
ProLight PEA2-3FVE 3W Warm White AC LED Technical Datasheet Version: 1.7 Features High Color rendering index Follow ANSI C78.788.2008 Chromaticity co-ordinates High flux per LED Good color uniformity Industry
Data Sheet. Nationstar LED
Data Sheet Nationstar LED 1 Table of Contents General Informations:... 3 Electrical and Flux Characteristics... 3 Color Wavelength Diagram:... 6 Mechanical Dimensions:... 7 Electrical Connection:... 7
LZC-00MC40. LedEngin, Inc. High Luminous Efficacy RGB LED Emitter. Key Features. Typical Applications. Description
Key Features High Luminous Efficacy RGB LED Emitter LZC-MC4 Ultra-bright, Ultra-compact 4W RGB LED Full spectrum of brilliant colors with superior color mixing Small high density foot print 9.mm x 9.mm
EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet 0805 Package Chip LED Preliminary
Feature RoHS compliant. This is a preliminary specification Chip LED package. intended for design purposes and Colorless clear resin. Wide viewing angle 130 o. subject to change without prior Brightness:
Edixeon S White Series Datasheet
Edixeon S White Series Datasheet Edixeon Series Features : Various colors More energy efficient than incandescent and most halogen lamps Low voltage operation Instant light Long operating life Copyright
Edixeon S5 White Series Datasheet
Edixeon S5 White Series Datasheet Edixeon Series Features : Various colors for choice Low voltage operation Instant light Long operating life Reflow process compatible Copyright 2013 Edison Opto Corporation.
3W RGB High Power LED
Features: Super high flux output and high luminance Designed for high current operation Low thermal resistance No UV Package Dimensions: Typical Applications Reading lights Portable flashlight Uplighters
703-0148 InGaN / Sapphire White Water clear. Parameter Rating Unit
Package Dimensions: * All dimensions are in mm * Tolerance: ±.6mm unless otherwise noted. LED Chip Lens Colour Ant Part No. Material Colour Coordinates 73-148 InGaN / Sapphire White Water clear Absolute
P2N LED. High Power LED PRODUCT DATASHEET. Introduction. RoHS Compliant
PRODUCT DATASHEET P2N LED High Power LED Introduction The P2N LED brings industry leading technology to the solid state lighting market with its high quality and performance. With a silicone lens, P2N
Cree XLamp XP-G LEDs PRODUCT FAMILY DATA SHEET PRODUCT DESCRIPTION FEATURES TABLE OF CONTENTS CLD-DS20 REV 4
PRODUCT FAMILY DATA SHEET CLD-DS20 REV 4 Cree XLamp XP-G LEDs PRODUCT DESCRIPTION The XLamp XP-G LED delivers unprecedented levels of light output and efficacy for a single die LED. The XLamp XP-G LED
T5050M-MCL1 High Power Mixing Color LED
PRODUCT DATASHEET T5050M-MCL1 High Power Mixing Color LED Introduction The T5050M-MCL1 LED from TSLC brings industry leading technology to the solid state lighting market with its high quality and performance.
Data Sheet. ASMT-Mx00 Moonstone TM 1 W Power LED Light Source. Features. Description. Specifications. Applications
ASMT-M Moonstone TM 1 W Power LED Light Source Data Sheet Description The Moonstone TM 1W Power LED Light Source is a high performance energ efficient device which can handle high thermal and high driving
1W High Power Purple LED Technical Data Sheet. Part No.: LL-HP60MUVA
1W High Power Purple LED Technical Data Sheet Part No.: LL-HP60MUVA Spec No.: HP60M Rev No.: V.2 Date: Aug./18/2009 Page: 1 OF 8 Features: Luckylight High power LED type. Lead frame type package (Heat
N35L-U High Power LED
N35L-U High Power LED Introduction The N35L-U LED from SemiLEDs brings industry leading technology to the solid state lighting market with its high quality and performance. With a silicone lens, N35L-U
LUXEON III Star. power light source. Introduction
Technical Datasheet DS46 power light source LUXEON III Star Introduction LUXEON III is a revolutionary, energy efficient and ultra compact new light source, combining the lifetime and reliability advantages
DOMINANT. Opto Technologies Innovating Illumination. InGaN White S-Spice : SSW-SLD DATA SHEET: SpiceLED TM. Features: Applications:
DATA SHEET: SpiceLED TM SpiceLED TM Like spice, its diminutive size is a stark contrast to its standout performance in terms of brightness, durability and reliability. Despite being the smallest in size
DOMINANT. Opto Technologies Innovating Illumination. 150 InGaN Warm White : NAF-BSG DATA SHEET : Primax TM. Features: Applications:
DATA SHEET : Primax TM 150 InGaN Warm White : NAF-BSG Primax TM Synonymous with function and performance, enter the Primax, the new era of high intensity illumination in LED. With its high flux output
P2O LED. High Power LED PRODUCT DATASHEET. Introduction. RoHS Compliant
P2O LED High Power LED Introduction The P2O LEDs from SemiLEDs utilize innovative MvpLED technology which delivers superior levels of optical performance and reliability. Use of state of the art silicone
Power SMD LED PLCC-2 Plus
Power SMD LED PLCC-2 Plus 2238 DESCRIPTION The VLMW51.. white LED in PLCC-2 plus package is an advanced product in terms of high luminous flux and low thermal resistance. In combination with the small
WL-SWTC SMD White Top View Ceramic LED
A Dimensions: [mm] B Recommended land pattern: [mm] D Absolute Maximum Ratings (Ambient Temperature 25 C): Properties Test conditions Value Unit Power dissipation P Diss 2.52 W Peak Forward Current duty/10@1khz
0.45mm Height 0402 Package Pure Green Chip LED Technical Data Sheet. Part No.: LL-S160PGC-G5-1B
.45mm Height 42 Package Pure Green Chip LED Technical Data Sheet Part No.: LL-S16PGC-G5-1B Spec No.: S16 Rev No.: V.2 Date: Dec./6/25 Page: 1 OF 9 Features: Package in 8mm tape on 7" diameter reel. Compatible
SURFACE MOUNT LED LAMP STANDARD BRIGHT 0606
PACKAGE DIMENSIONS 0.075 (1.9) 0.063 (1.6) 0.035 (0.9) TOP 0.047 (1.2) 0.012 (0.3) 0.032 [0.8] SIDE 0.043 [1.1] 1 3 0.020 [0.5] 2 4 BOTTOM CATHODE MASK 1 2 3 4 HER / AlGaAs Red / Yellow (for-34) Green
Bridgelux ES Rectangle Array Series
Bridgelux ES Rectangle Array Series Product Data Sheet DS24 BXRA-xxx0800, BXRA-xxx1200, BXRA-xxx2000 BXRA-40E0950, BXRA-40E1350, BXRA-40E2200 BXRA-xxC1100, BXRA-xxC1600, BXRA-xxC2600 Introduction The Bridgelux
5W HI-POWER LED SPECIFICATION
5W HI-POWER LED SPECIFICATION HPG8b-495xWHCx Drawn by Checked by Approved by RoHS Conformity DATE:2013/4/9 REV:A HUEY JANN High Power 5W LED is made of GaInN chips with precise package technique which
EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet High Power LED 1W (Preliminary)
Technical Data Sheet High Power LED 1W (Preliminary) Features Feature of the device: small package with high efficiency Typical view angle: 150. Typical light flux output: 30 lm @ 350mA. ESD protection.
1.50mm Height 2220 Package Top View Full Color Chip LEDs Technical Data Sheet. Part No.: LL-R5050RGBC-001
.5mm Height 222 Package Top View Full Color Chip LEDs Technical Data Sheet Part No.: LL-R55RGBC- Spec No.: R55 Rev No.: V.2 Date: Mar./6/26 Page: OF 2 Features: P-LCC-6 package. White package. Optical
50W EdiStar. Approved By Customer. Designer Checker Approval. Ultra High Power LED
Ultra High Power LED 50W EdiStar EdiStar Emitter Approved By Customer Designer Checker Approval Date:2006/12/04 Version:Preliminary V0.1 4F, No. 800, Chung-Cheng Rd, Chung-Ho, Taipei 235, Taiwan Tel: 886-2-8227-6996
Contents. 12. Lot Number 10. 13. Reel Packing Structure 11. 14. Precaution for Use 13. 15. Hazard Substance Analysis 14. 16. Revision History 18
Rev : 00 ISSUE NO : DATE OF ISSUE : 2009. 04. 10 S P E C I F I CATION MODEL : SLHNNWW629T1S0U0S0 [Rank : (S0), (U0), (S0)] HIGH POWER LED - SUNNIX6 CUSTOMER : CUSTOMER CHECKED CHECKED APPROVED SAMSUNG
Standard 0603 SMD LED
TLMS, TLMO, TLMY, TLMG, TLMP, TLMB Standard 63 SMD LED DESCRIPTION 8562 The new 63 LED series have been designed in the smallest SMD package. This innovative 63 LED technology opens the way to smaller
Surface Mount 905 nm Pulsed Semiconductor Lasers High Power Laser-Diode Family for Commercial Range Finding
Preliminary DATASHEET Photon Detection Surface Mount 5 nm Pulsed Semiconductor Lasers Near field profile Excelitas pulsed semiconductor laser produces very high peak optical pulses centered at a wavelength
CLA4607-085LF: Surface Mount Limiter Diode
DATA SHEET CLA4607-085LF: Surface Mount Limiter Diode Applications Low-loss, high-power limiters Receiver protectors Anode (Pin 1) Anode (Pin 3) Features Low thermal resistance: 55 C/W Typical threshold
CHM-27 COB Arrays White LED
CHM-27 COB Arrays White LED Features: Table of Contents Technology Overview...2 Test Specifications...2 Chromaticity Bins...3 Product Ordering & Shipping Part Numbers...4 Product Typical Flux Range. 5
SPEC NO: DSAJ8637 REV NO: V.6B DATE: JUL/01/2016 PAGE: 1 OF 5 APPROVED:
1.0X0.5mm SMD CHIP LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: APHHS1005ZGC Green Features 1.0mmX0.5mm SMD LED, 0.5mm thickness. Low power
LXML-PWC2 Luxeon Rebel Starboard LED
LXML-PWC2 Luxeon Rebel Starboard LED Opulent Part Number: REBEL-STAR-ES-CW200 Opulent Starboard: MCPCB Luxeon Rebel LED: LXML-PWC2 Opulent YOUR GREEN PARTNER Features Excellent thermal conductivity Excellent
Luxeon Emitter. power light source. Introduction
Technical Datasheet DS25 power light source Luxeon Emitter Introduction Luxeon is a revolutionary, energy efficient and ultra compact new light source, combining the lifetime and reliability advantages
SLLP-5630-150-G PRODUCT DATASHEET. RoHS Compliant
PRODUCT DATASHEET SLLP-5630-150-G Table of Contents Features... 1 Applications 1 Characteristics.. 1 Typical Electro optical Characteristics Curves... 3 Mechanical Dimensions... 4 Carrier Tape Dimensions.....
CLD-DS45 Rev 2A. Product family data sheet
Cree XLamp X-D White LEDs Product family data sheet CLD-DS45 Rev 2A PRODUCT DESCRIPTION The XLamp X-D is Cree s newest lighting class LED, bringing the next generation of performance and price to LED lighting
CBT-90 TE Thermally Enhanced LED Chipset
CBT-90 TE Thermally Enhanced LED Chipset Features: Table of Contents Technology Overview...2 Test Specifications...2 Ordering Information...3 Monochrome Binning Structure...4 Large, monolithic chip with
HL-A-3528H308W-S1-13. Description. Applications. Recommended Soldering. Package Dimensions
RoHS Specification Client Name: Client P/N: Factory P/N: HL-A-3528H308W-S1-13 OF-SMD3528WN Sending Date: Client approval Hong li approval Approval Audit Confirmation Approval Audit Confirmation 殷 小 平 王
SPECIFICATIONS FOR APPROVAL
CUSTOMER :. DATE : 2010. 12. 16. SPECIFICATIONS FOR APPROVAL PRODUCT NAME : Top View Type White SMD LED MODEL NAME : LEMWS59T80LZ00 APPROVAL REMARK APPENDIX Designed Checked Approved LG Innotek Co., Ltd.
HLMP-1600, HLMP-1601, HLMP-1620, HLMP-1621 HLMP-1640, HLMP-1641, HLMP-3600, HLMP-3601 HLMP-3650, HLMP-3651, HLMP-3680, HLMP-3681
HLMP-16, HLMP-161, HLMP-162, HLMP-1621 HLMP-16, HLMP-161, HLMP-36, HLMP-361 HLMP-365, HLMP-3651, HLMP-368, HLMP-3681 T 1 3 / (5 mm), T-1 (3 mm), 5 Volt, 12 Volt, Integrated Resistor LED Lamps Data Sheet
Product family data sheet
Cree XLamp XP-E LEDs Product family data sheet CLD-DS18 Rev 19 Product Description The XLamp XP-E LED combines the proven lighting-class performance and reliability of the XLamp XR-E LED in a package with
High Speed Infrared Emitting Diode, 940 nm, GaAlAs, MQW
High Speed Infrared Emitting Diode, 940 nm, GaAlAs, MQW DESCRIPTION is an infrared, 940 nm side looking emitting diode in GaAlAs multi quantum well (MQW) technology with high radiant power and high speed,
and cathode, allowing them to be driven individually, this increasing flexibility in electrical layout.
ACULED VHL Standard White, Monochromatic and Multi-Colored Four-Chip LED Products DESIGN YOUR OWN! Custom DYO product line also available B R O C H U R E Scale 1:1 = 13 mm The ACULED VHL (Very High Lumen)
0.28" Quadruple Digit Numeric Displays. Technical Data Sheet. Model No.: KW4-281XSB
.28" Quadruple Digit Numeric Displays Technical Data Sheet Model No.: KW4-281XSB Spec No.:W2841C/D Rev No.: V.2 Date:Sep/3/29 Page: 1 OF 6 Features:.28 (inch) digit height. Excellent segment uniformity.
Agilent T-1 3 / 4 (5 mm), T-1 (3 mm), 5 Volt, 12 Volt, Integrated Resistor LED Lamps Data Sheet
Agilent T-1 3 / (5 mm), T-1 (3 mm), 5 Volt, 12 Volt, Integrated Resistor LED Lamps Data Sheet HLMP-16, HLMP-161, HLMP-162, HLMP-1621 HLMP-16, HLMP-161, HLMP-36, HLMP-361 HLMP-365, HLMP-3651, HLMP-36, HLMP-361
Low Current SMD LED PLCC-2
Low Current SMD LED PLCC-2 VLMC31. 19225 DESCRIPTION These new devices have been designed to meet the increasing demand for low current SMD LEDs. The package of the VLMC31. is the PLCC-2 (equivalent to
LUXEON LEDs. Circuit Design and Layout Practices to Minimize Electrical Stress. Introduction. Scope LED PORTFOLIO
LED PORTFOLIO LUXEON LEDs Circuit Design and Layout Practices to Minimize Electrical Stress Introduction LED circuits operating in the real world can be subjected to various abnormal electrical overstress
Ultrabright White LED, Ø 3 mm
Ultrabright White LED, Ø 3 mm DESCRIPTION The VLHW41 series is a clear, untinted 3 mm LED for high end applications where supreme luminous intensity is required. These lamps utilize the highly developed
Standard SMD LED PLCC-2
Standard SMD LED PLCC-2 DESCRIPTION 948553 This device has been designed for applications requiring narrow brightness and color selection. The package of this device is the PLCC-2. It consists of a lead
Silicon PIN Photodiode
VEMD940F Silicon PIN Photodiode DESCRIPTION VEMD940F is a high speed and high sensitive PIN photodiode in a miniature side looking, surface mount package (SMD) with daylight blocking filter. Filter is
Silicon NPN Phototransistor
Silicon NPN Phototransistor 16758-1 VEMT252X1 DESCRIPTION VEMT25X1 VEMT25X1 series are silicon NPN epitaxial planar phototransistors in a miniature dome lens, clear epoxy package for surface mounting.
Cree PLCC6 3 in 1 SMD LED CLY6C-FKC
Cree PLCC6 3 in 1 SMD LED PRODUCT FAMILY DATA SHEET CLD-CT1323.005 PRODUCT DESCRIPTION This SMD LED features an IPx8 water resistant rating in a PLCC6 package. These high performance tricolor SMT LEDs
Data Sheet. HLMP-Yxxx T-1 (3 mm) AlInGaP LED Lamps. Description. Features. Applications. Package Dimension
HLMP-Yxxx T-1 (3 mm) AlInGaP LED Lamps Data Sheet Description This family of T-1 lamps is widely used in general purpose indicator and back lighting applications. The optical design is balanced to yield
Data Sheet. HLMP-4700, HLMP-4719, HLMP-4740 HLMP-1700, HLMP-1719, HLMP-1790 T-1 3 / 4 (5 mm), T-1 (3 mm), Low Current LED Lamps. Description.
HLMP-4700, HLMP-4719, HLMP-4740 HLMP-1700, HLMP-1719, HLMP-1790 T-1 3 / 4 (5 mm), T-1 (3 mm), Low Current LED Lamps Data Sheet Description These tinted diffused LED lamps are designed and optimized specifically
No. 3, Gongye E. 3rd Road, Hsinchu Science Park, Hsinchu 30075, Taiwan TEL:886-3-565-8800. Lextar.com 50W-100W COB LED. Updated on 2012/010/11
Lextar.com 50W-100W COB LED Updated on 2012/010/11 Approval Sheet 50W COB LED Product Specification Product COB Part Number PB50H01 Customer Issue Date 2012/10 Feature LED COB Dice Technology : InGaN High
UV SMD LED PLCC-2 FEATURES APPLICATIONS. at I F (ma) (ma) MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX.
UV SMD LED PLCC-2 VLMU31 19225 DESCRIPTION The package of the VLMU31-series is the PLCC-2. It consists of a lead frame which is embedded in a white thermoplast. The reflector inside this package is filled
Cree XLamp MT-G EasyWhite LEDs
ree XLamp MT-G EasyWhite LEDs PRODUT FAMILY DATA SHEET/ BINNING AND LABELING DOUMENT LD-DS36 REV 0 WWW.REE.OM/XLAMP PRODUT DESRIPTION The XLamp MT-G EasyWhite LED maximizes lumen density, eliminates chromaticity
Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package
ILD25T, ILD26T, ILD27T, ILD211T, ILD213T Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package i17925 A1 C2 A3 C4 i17918-2 8C 7E 6C 5E DESCRIPTION The ILD25T, ILD26T, ILD27T, ILD211T, and ILD213T
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet Chip LED with Bi-Color (Multi-Color) Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow
Dome Lens SMD LED FEATURES APPLICATIONS. WAVELENGTH (nm)
Dome Lens SMD LED VLD.1235R... DESCRIPTION VLD.1235G... The dome lens SMD LED series has been designed in a small untinted and clear molded package with lens for surface mounting as gullwing or reverse
S112-XHS. Description. Features. Agency Approvals. Applications. Absolute Maximum Ratings. Schematic Diagram. Ordering Information
Description Features The S112-X is a bi-directional, single-pole, single-throw, normally open multipurpose solid-state relay. The circuit is composed of one input IR LED with a series limiting resistor
Cree PLCC6 3 in 1 SMD LED SLV6A-FKB
Cree PLCC6 3 in 1 SMD LED PRODUCT FAMILY DATA SHEET CLD-CT1320.001 PRODUCT DESCRIPTION These SMD LEDs are packaged in an industry standard PLCC6 package. These high performance tricolor SMT LEDs are designed
Optocoupler, Phototransistor Output, 4 Pin LSOP, Long Creepage Mini-Flat Package
Optocoupler, Phototransistor Output, 4 Pin LSOP, Long Creepage Mini-Flat Package FEATURES A 4 C Low profile package High collector emitter voltage, V CEO = 8 V 7295-6 DESCRIPTION The has a GaAs infrared
Data Sheets of AVA Technology SMD Type White LED. Model : T5050. AVA Technology Co.
Data Sheets of AVA Technology SMD Type White LED Model : AVA Technology Co. 2640 S. Myrtle Ave. Suite 6 Monrovia, CA 91016 P: 626-574-7726 F: 626-574-7732 http://www.led4light.com Top View LED with Reflector
Welcome to this presentation on Thermal Characteristics of LEDs, part of OSRAM Opto Semiconductors LED Fundamentals series.
Welcome to this presentation on Thermal Characteristics of LEDs, part of OSRAM Opto Semiconductors LED Fundamentals series. In this presentation we will look at the basics of thermal management in LED
IR Edixeon Emitter. 1W Edixeon
High Power LED 1W Edixeon IR Edixeon Emitter Date:2006/06/01 Version:2.0 Device No. : 3-RD-01-E0009 Believe SRL Via Lago di Trasimeno, 21 - Schio (VI) - Italy TEL: +39/0445/579035 FAX: +39/0445/575708
Data Sheet. HCMS-235x CMOS Extended Temperature Range 5 x 7 Alphanumeric Display. Features. Description. Typical Applications
HCMS-235x CMOS Extended Temperature Range 5 x 7 Alphanumeric Display Data Sheet Description This sunlight viewable 5 x 7 LED four-character display is contained in 12 pin dual-in-line packages designed
B Recommended land pattern: [mm] 2013-09-10. SSt. SSt. SSt. HOe 2013-05-14 2013-04-10. SSt. SSt. SSt 2012-12-10. SSt 2012-11-05. HOe. SSt.
![B Recommended land pattern: [mm] 2013-09-10. SSt. SSt. SSt. HOe 2013-05-14 2013-04-10. SSt. SSt. SSt 2012-12-10. SSt 2012-11-05. HOe. SSt.](/thumbs/40/21198032.jpg "B Recommended land pattern: [mm] 2013-09-10. SSt. SSt. SSt. HOe 2013-05-14 2013-04-10. SSt. SSt. SSt 2012-12-10. SSt 2012-11-05. HOe. SSt.")
A Dimensions: [mm] B Recommended land pattern: [mm] D Absolute Maximum Ratings (Ambient Temperature 25 C): Properties Test conditions Value Unit Power dissipation P Diss 105 mw Peak Forward Current duty/10@1khz
HLCP-J100, HDSP-4820, HDSP-4830 & HDSP-4832 10-Element Bar Graph Array. Features
HLCP-J, HDSP-, HDSP- & HDSP- -Element Bar Graph Array Data Sheet Description These -element LED arrays are designed to display information in easily recognizable bar graph form. The packages are end stackable
Low Current SMD LED PLCC-2
Low Current SMD LED PLCC-2 VLMC31. 19225 DESCRIPTION These new devices have been designed to meet the increasing demand for low current SMD LEDs. The package of the VLMC31. is the PLCC-2 (equivalent to
HDSP- HDSP- HDSP- HDSP-
7.6 mm (.3 inch) Micro Bright Seven Segment Displays Technical Data HDSP-74x Series HDSP-75x Series HDSP-78x Series HDSP-A5x Series HDSP-A4x Series Features Available with Colon for Clock Display Compact
MADP-000504-10720T. Non Magnetic MELF PIN Diode
MADP-54-172T Features High Power Handling Low Loss / Low Distortion Leadless Low Inductance MELF Package Non-Magnetic Surface Mountable RoHS Compliant MSL 1 Package Style 172 Dot Denotes Cathode Description
1SMB59xxBT3G Series, SZ1SMB59xxT3G Series. 3 Watt Plastic Surface Mount Zener Voltage Regulators
9xxBTG Series, SZ9xxTG Series Watt Plastic Surface Mount Zener Voltage Regulators This complete new line of W Zener diodes offers the following advantages. Features Zener Voltage Range. V to V ESD Rating
Harvatek Surface Mount LED Data Sheet. HT-F195 Series
Harvatek Surface Mount LED Data Sheet Official Product Product: Data Sheet No. Tentative Product **************** Jul. 15, 2005 Version of 1.4 Page 1/20 DISCLAIMER...3 PRODUCT SPECIFICATIONS...4 ATTENTION:
Physical. Electrical. Environmental. Insulation: Contact: Plating: Temperature Rating: -55 C to +85 C
M I/O Interconnect System 2.0 mm for IEEE 194 Wiremount Receptacle (Female) E206 Series Designed to mate to all M I/O Interconnect System 2.0 mm for IEEE 194 Boardmount Plugs Polarized to provide proper
Cree PLCC4 3 in 1 RGB SMD LED CLMVB-FKA
Cree PLCC4 3 in 1 RGB SMD LED PRODUCT FAMILY DATA SHEET CLD-CT1230.007 PRODUCT DESCRIPTION The full-color RGB LED offers a high-intensity light output and a wide viewing angle. The compact 2mm x 2mm package
PDS5100H. Product Summary. Features and Benefits. Mechanical Data. Description and Applications. Ordering Information (Note 5) Marking Information
Green 5A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER POWERDI 5 Product Summary I F V R V F MAX (V) I R MAX (ma) (V) (A) @ +25 C @ +25 C 1 5..71.35 Description and Applications This Schottky Barrier Rectifier