710/910/911 Picture/Casement/Awning Windows

Transcription

1 710//911 Picture/Casement/Awning Windows

2

3 Picture/Casement/Awning Windows Milgard Aluminum Window 710//911 Milgard s 710//911 Series is designed for high performance and maximum strength for architectural applications throughout the West. Ideal for virtually any architectural style of home, the 710//911 Series offers clean sight lines, maximum glazing area, and requires virtually no maintenance. Its precisely mitered corners provide strength and a detailed appearance with equal margins on all sides. Milgard s Aluminum windows, doors, and skylights carry a Full Lifetime Warranty to the original single family homeowner covering both materials and labor. The Milgard Full Lifetime Warranty is fully transferrable up to 10 years. For complete warranty details visit milgard.com Commercial, apartment, multi-family, and co-housing projects are covered by a 10-year warranty from date of manufacture, covering materials and labor, including the glazing unit. 710//911-2

4 Picture/Casement/Awning Windows Milgard Aluminum Window 710//911 CONFIGURATIONS All 710//911 Series Casement, Awning, and Picture windows are available in both standard and custom sizes to match virtually any design, either new or retrofit. COMPONENTS FRAME Frame components are made from 6063-T5 aluminum alloy with a structural wall thickness of.125, and non-structural wall thickness of.062. The frame is available in clear and bronze anodized finishes with a standard.4 mil coating thickness, and white baked enamel finish. Wide screw spacing on the mechanically joined corners ensure a rigid connection with a consistent dimension. Corners are sealed for added protection from the weather. The 710//911 Series is available with either a standard frame with nail-on fin, or with Milgard s specially designed H-Bar frame for wood stop or retrofit application. The standard frame is 2 1/4 in width and the H-Bar is 1-1/4 wide with 5/8 legs that provide a surface area for wood stop installation. Both types utilize 3/4 overall glazing for either fixed or vented sections. NAIL-ON FIN An integral nailing fin extends 1 around the perimeter of the standard frame and is used to attach the window into the rough opening. The fin is scored for complete removal for retrofit/ wood stop installations. The fin is set back 1 from the exterior edge of the frame. The optional H-Bar frame has no nailing fin and must be stopped in the opening. WEEP SYSTEM The rectangular weep holes are located in the frame sill for effective drainage and moisture control. GLAZING MATERIAL AAMA approved glazing tape adheres glass to the fixed and vent frame and seals and cushions the glass. Rigid vinyl setting blocks are used to support the glass-unit, preventing glass slippage and glass-tometal contact. Extruded vinyl glazing (snapin) bead is applied around the exterior edge. Metal bead is available at some locations. GLASS Glass options are available in 3/4 or 1 overall insulating units in clear, tinted, reflective, obscure, Low-E, and safety glass. Other specialty glass is available upon request. (See Glass Section for types and description.) VENT PANEL The vent features a clean appearance and rigid construction with mitered andmechanically joined corners. Due to weight limitations of the hinging system, the vent is restricted to a maximum size of 12 square feet for awnings and 15 square feet for casements. HINGES Two types of hinges are available with the 710//911 Series, one standard and one for egress application. The stainless steel egress hinge allows a full 90 degree rotation opening. The standard hinge is zinc-plated steel with a sliding brass shoe, which is tension adjustable and is completely concealed when the window is in a closed position. Each vent uses two hinges. WEATHERSTRIPPING For Casements and Awnings, a dual durometer vinyl bulb seal surrounds the entire perimeter of the vent frame, creating a positive, weather tight seal. LOCKING ASSEMBLY Friction Hardware Hand-operated push out latch located on the vent which secures against a polyester strike plate and provides a positive lock and tight seal. Note: Casements over 36 in height two handles are utilized to ensure a tight seal. SCREEN Screen frames are aluminum, finished with three coats of color matched baked polyester for long-term durability. The screen material is an attractive, low maintenance gray fiberglass mesh. Screens are installed on the inside of Casement and Awning windows using four screw-mounted vinyl L-clips that secure through pre-drilled holes in the window frame. A wicket may be inset into the screen, giving access to the lock for vent operation. OPTIONS GRIDS Available in 5/8 standard or 1-1/16 sculptured aluminum profiles sealed between panes. WARM EDGE SPACER Spacer available in a standard clear finish or optional bronze or champagne finish in the airspace of the insulating glass units. PGG Intercept warm-edge steel spacer available in certain regions (standard in some areas.) Contact your Milgard manufacturing representative for spacers used in your area. 710//911-3

5 Picture/Casement/Awning Windows Milgard Aluminum Window 710//911 EGRESS HINGES Available upon request. TRUE DIVIDED LITE True divided lite configurations are available, subject to production approval. GLASS Refer to Glass Section STUCCO FIN 1 3/8 fin setback. Check with local branch for availability. COLORS Check with local branch for color options and availability. TEST STANDARDS See Test Data Section CAUTION: The use of petroleum based fuels or solvents as release agents in stucco wall installations or glass cleaning will chemically attack materials used in seals and other components, and voids the Milgard Full Lifetime Warranty. The use of wax based release agents is recommended. Expanding foam for insulation purposes should not be used. Non-expanding foam or loose packed batt insulation is recommended. 710//911-4

6 Picture Windows Milgard Aluminum Window 710//911 Picture window 2-lites vertical - Min Max / Picture window 2-lites horizontal - Min Max Picture window Picture window 2-lites vertical Picture window 2-lites horizontal Picture window 3-lites vertical - Min Max Picture window gable - Min Max / Picture window 3-lites vertical Picture window 3-lites horizontal Picture window gable Picture window gable triangle Picture window 3-lites horizontal - Min Max Picture window gable triangle - Min Max / Picture window hexagon/octagon - Min Max Picture window gable 3 sided - Min Max Windows over 40 square feet or mulled units over 72 square feet shipped open for field glazing. - Max single lite is 40 square feet Picture window hexagon Picture window octagon Picture window gable 3-sided - Divided lite configurations are available. NOTE: For engineering approval contact your Milgard representative for any configuration over 40 square feet. Each Milgard Manufacturing plant reserves the right to alter or change sizes and configurations according to location capabilities. Ask your Milgard rep about specialty applications and size limits for other configurations. *Windows viewed from exterior Windows over 40 square feet shipped open for field glazing. 710//911-5

7 710 Aluminum Assembly Drawing 710// //911-6

8 710S Aluminum Assembly Drawing 710// //911-7

9 C Aluminum Assembly Drawing 710// //911-8

10 S Aluminum Assembly Drawing 710// //911-9

11 911C Aluminum Assembly Drawing 710// //911-10

12 Casement Windows Milgard Aluminum Window Full casement - 12 square feet maximum vent size - Min width 1 6 Max width Min height 1 6 Max height 5 0 Double casement - 15 square feet maximum vent size - Min width 4 0 Max width Min height 1 6 Max height 5 0 Double casement w/picture - 15 square feet maximum vent size - Min width 3 0 Max width Min height 1 0 Max height equal leg frame available - Egress hinges available - minimum egress and Divided lite configurations are available - Hinge left or right. NOTE: For engineering approval contact your Milgard representative for any configuration over 40 square feet. Each Milgard Manufacturing plant reserves the right to alter or change sizes and configurations according to location capabilities. Ask your Milgard rep about specialty applications and size limits for other configurations. Windows over 40 square feet shipped open for field glazing. -1

13 C Push out Aluminum Assembly Drawing -2

14 S Push out Aluminum Assembly Drawing -3

15 C Roto Aluminum Assembly Drawing -4

16 S Roto Aluminum Assembly Drawing -5

17 911C Casement Aluminum Assembly Drawing -6

18 Picture/Casement/Awning Windows Milgard Aluminum Window Full awning - 12 square feet maximum vent size - Min vent width 1 6 Max vent width Min vent height 1 6 Max vent height 3 0 Double awning - 12 square feet maximum vent size - Min vent width 3 0 Max vent width Min vent height 1 6 Max vent height 3 0 NOTE: For engineering approval contact your Milgard representative for any configuration over 40 square feet. Each Milgard Manufacturing plant reserves the right to alter or change sizes and configurations according to location capabilities. Ask your Milgard rep about specialty applications and size limits for other configurations. Windows over 40 square feet shipped open for field glazing. -7

19 C Roto Awning Aluminum Assembly Drawing -8

20 S Roto Awning Aluminum Assembly Drawing -9

21 C Push Out Awning Aluminum Assembly Drawing -10

22 S Push Out Awning Aluminum Assembly Drawing -11

23 911C Awning Aluminum Assembly Drawing -12