WHD110 WIRELESS 5G HD AV KIT

Transcription

1 WHD110 WIRELESS 5G HD AV KIT User Manual 2012 Kinivo LLC. All rights reserved. Kinivo is a trademark of Kinivo LLC. Bluetooth word mark and the Bluetooth logo are registered trademarks of Bluetooth SIG. All other trade names are registered trademarks of respective manufacturers. This manual may not be copied in any media or form without the written consent of Kinivo LLC. Kinivo Product Support Online : support@kinivo.com

2 Table of Contents Important Safety Instructions... 3 Introduction... 3 Features... 3 Contents... 3 Product Overview... 4 Getting Started... 5 Installation Transmitter Receiver... 7 Connection... 7 IR Extender / Emitter Function... 7 General Specifications... 7 Troubleshooting Not receiving any output / The display is blank The wireless link LED indicator is not lit The IR Extender does not work... 8 Warranty... 8 Online Support / Contact Us

3 Read all safety and operation instructions before installing and using the product. Warning: To reduce the risk of fire or electric shock, do not expose the product to water or moisture. Important Safety Instructions 1. Do not expose the product to liquid, moisture or areas of high humidity. 2. Do not use abrasive cleaners to clean the product as it may damage the unit. Always unplug and power off the unit before cleaning. 3. Do not expose the product to extremely high or low temperatures. 4. Keep the product away from direct sunlight. 5. Use only accessories and attachments as supplied and designated in the instruction manual. 6. Do not attempt to open or modify the product in any way. 7. Store the product in a cool dry place. 8. Always dispose of the packaging and unit in accordance with the local regulations and in a responsible manner. Introduction The Wireless HDMI Transmitter & Receiver Kit operates in the 5GHz frequency region to deliver high quality HD video and audio up to 1080p. The HDMI Transmitter & Receiver Kit can be used to wirelessly connect HDMI devices such as Blu-ray, computers, gaming consoles, cable boxes, receivers, audio devices, HDTVs, monitors, and much more. Features Extends HDMI signal up to 65 feet in an open area or 40 ft. indoors* Supports full HD 1080p with 3D support Designed for home audio video Convenient setup; simply plug in and play Remotely control your DVD player or other input device (using the IR emitter/extension) *Actual distances will vary depending on the materials of the building and walls between the transmitter and receiver. Contents Wireless HDMI Transmitter (TX) Wireless HDMI Receiver (RX) Two Power Adapters IR Extension Cable HDMI Cable User Manual 3

4 Product Overview WHD110 WIRELESS HD AV KIT TRANSMITTER Power Switch IR Output Link Indicator HDMI Input Power LED Power Input Pairing Button Wireless HDMI Transmitter Unit (TX) WHD110 WIRELESS HD AV KIT RECEIVER Power Switch Link Indicator Power LED HDMI Output IR Sensor Power Input Pairing Button Wireless HDMI Receiver Unit (RX) 4

5 Getting Started Wireless 5G HDMI Environment Setup IR EYE Input HDMI Input HDMI Output Wireless HDMI Transmitter Unit (TX) Wireless HDMI Receiver Unit (RX) HDMI Input device (DVD Player, gaming console, cable/satelite box etc) Remote control of the HDMI Input device (DVD Player, gaming console, cable/satelite box etc) TV/Projector The Wireless HDMI Transmitter broadcasts wirelessly over 5G to the HDMI Receiver. The wireless transmitter and receiver can be set up horizontally or vertically, however for optimal performance it is recommended that the device is placed vertically. Note: Before starting the installation, please ensure that all HDMI devices are powered off. 5

6 Installation HDMI Input HDMI Output Wireless HDMI Transmitter Unit (TX) Wireless HDMI Receiver Unit (RX) IR Extension Cable HDMI Input device (DVD Player, gaming console, cable/satelite box etc.) HDMI Output device (HDTVs, Monitors, Projectors etc.) 1. Transmitter 1. Place the Transmitter (TX) near the HDMI input device (Media player, gaming console, cable box, etc.) 2. Connect the HDMI input device to the HDMI IN port of the Transmitter using an HDMI cable. 3. If you want to control your input device using IR remotes, connect the included IR extension cable to the IR port on the Transmitter and place the receiving end of the IR cable near the IR receiver of your HDMI input device (typically in front of the device). 6

7 2. Receiver 1. Place the Receiver (RX) near the HDMI output device (HDTVs, monitors, projectors, etc.) 2. Connect the HDMI output device to HDMI OUT port of the Receiver using an HDMI cable. 3. Connect the power adapters to the Transmitter and the Receiver. After following these steps, the Wireless HDMI Kit is ready to use. Simply power on all devices to begin operation. Connection The Transmitter and Receiver will automatically create a wireless link upon being powered on. The connection process may take several seconds depending on the distance between the units and other environmental factors. Once the wireless link has been established, a blue LED light will be lit on both units. During the initial power up phase, it is normal for your HDMI display to turn on and off for a short time. IR Extender / Emitter Function To ensure that the Transmitter and Receiver is positioned to receive IR commands: 1. Connect the included IR extension cable to the IR port on the Transmitter. 2. Place the emitter end of the IR cable near the IR receiver of your DVD player / gaming console / other HDMI input device (typically in front of the input device) You can now control your input device (DVD player / gaming console / cable box) from the display side of your installation using the Transmitter IR Extender. General Specifications Video Format Support Audio Format Support RF Communication System Modulation Image Delay Antenna Operating Frequency Maximum Transmission Power IR Carrier Modulation Frequency Support Power Supply Operation Temperature TV: 1080p, 1080i, 720p, 576p, 480p PC: up to 1920x1080 PCM, DTS, DOLBY DIGITAL MIMO OFDM < 1ms High Performance Internal Antennas 5.1GHz to 5.9GHz 12dBm ±2dBm 38kHz AC Input 100~240V, DC Output 5V 32 0 F to F 7

8 Troubleshooting 1. Not receiving any output / The display is blank 1. Check that all connections are correctly made and that all units are powered on. 2. Check that the blue LEDs are lit on both the Transmitter and Receiver. 3. If the Transmitter or Receiver are positioned horizontally, move them to the vertical position. The vertical position may help improve the signal quality. 4. Power the Transmitter and Receiver on and off. 5. Reduce the distance between the Transmitter and Receiver then power both of the devices on. 2. The wireless link LED indicator is not lit 1. If the Transmitter or Receiver are positioned horizontally, move them to the vertical position. The vertical position may help improve the signal quality. 2. Power the Transmitter and Receiver on and off. 3. Reduce the distance between the Transmitter and Receiver then power both of the devices on. 3. The IR Extender does not work 1. Verify if the IR extension cable is correctly connected to the Transmitter unit. 2. Reposition the IR receiving end of the cable to another location near the IR port of your input device (typically in front of the input device). 3. Verify if the IR transmitter on the Receiver is visible and able to transmit from your remote control. Warranty 1 Year Limited Hardware Warranty. Kinivo hereby warrants to the customer of record that this product is in good-working condition and free from defects in material or workmanship under normal use for a duration of 1 year after the date of purchase. The product has been tested to meet the highest quality standards in each testing category. In the unlikely event that the product proves to be defective, Kinivo will repair or replace the product free of charge. If replacement is required and if Kinivo then no longer carries the same product, then Kinivo reserves the right to substitute the product with a replacement product of like quality and size, suitable for the intended use. This warranty is limited to repair or replacement of the mentioned product only, is non-transferable and does not extend to any product damaged by misuse, natural disasters or any other circumstances beyond Kinivo s control. The warranty does not cover or provide for the reimbursement or payment of incidental or consequential damage resulting from breach of the limited warranty described above. Except for the limited warranty described above we offer no other warranties expressed or implied, and other than limited warranty expressly contained herein, we hereby disclaim any and all warranties, including without limitation any implied warranties of merchantability, suitability or fitness for a particular purpose. If your product is not functioning or you have any concerns please contact Kinivo Support before returning the product. 8

9 Online Support / Contact Us Please visit us at support.kinivo.com or for support information, downloads and how-to s. You may also reach us via or live chat (details below). Kinivo Product Support support@kinivo.com Live chat : 9

10 year limited 1hardware warranty Made in china Kinivo Product Support Online : support@kinivo.com