HAZARDOUS LOCATION LINEAR FLUORESCENT LIGHTING

Transcription

1 HAZARDOUS LOCATION LINEAR FLUORESCENT LIGHTING

2 Explosion Proof Fluorescent Light Luminaire Haz-Linear 7 Linear Fluorescent XFM Series Explosion Proof Fluorescent Light Luminaire The XFM Series is a must for any explosive atmosphere location! This product has five different hub entries at each end, enabling the installer to wire the luminaire at more desirable angles. Center ballast placement provides a more balanced luminaire for ease of installation and weight distribution. The XFM Series is available in 2' (2 lamp fixture only) and 4' lengths for 2, 3 and 4 lamp combinations in T5, T5HO,, and HO. Lamps included. Applications Paint spray booths Marine outdoor Chemical plants Wastewater treatment areas Features Factory sealed, cast natural aluminum (U.S. Foundry) that is lightweight. Ballast mounted in the center for better balance and low profile. (5) 1/2" NPT hubs located at 0, and 90 angles. Oil drilling rigs, refineries Grain elevators Coal & dust storage One piece painted aluminum reflector.189" wall borosilicate glass tubes Listings UL 844 listed and labeled for hazardous locations Class I, Division 1, Groups C and D; Class I, Division 2, Groups A, B, C and D Class II, Divisions 1 and 2, Groups E, F and G Class III UL 1598A listed and labeled marine type lighting luminaire outside type (salt water) UL 1598A testing equivalent to NEMA 4X requirements for hose-down and corrosion resistance UL listed 1598 UL listed and labeled for use inside paint spray booths and rooms Also meets requirements for National Fire Protection Association (NFPA) Standard 33 and National Electrical Code (NEC) Article 516 UL C approved and labeled Class I, Division 1, Groups C and D NEMA 3, 4X, 7CD, 9EFG Simultaneous presence Class I and Class II Class I, Zone 1, Group II A Class I, Zone 1, Group II B XFM Series LAMP TYPE 2 LAMP QTY 4 LENGTH (ft) UN VOLTAGE OPTIONS T5** * T5HO* HO 2 (lamp) 3 (lamp) 4 (lamp) 2: (length) 4: (length) * 5000K lamp standard for T5HO and lamps ** 4100K lamp standard for HO and T5 lamps 3 and 4 lamp luminaires not available in 2 ft. length 3 lamp luminaires not available in T5 or HO *** 4' two lamp ONLY 120V or 277V operation environment Normally stocked Consult factory for non-standard luminaires. UN: Universal /60 Hz 34: 347 volt (T5HO & only) EB: Emergency battery backup*** WG: Stainless steel guard P: Polycarbonate shield SR: Premium specular reflector (93% reflective specular reflector insert) MK: Wall/ceiling mount kit factory installation for the 4 lamp fixture (the XFM-4401 can be field installed on 2 & 3 lamp fixtures) Operating Temperature Codes Based on 40 C Ambient Class I, DIV 1 Class I, DIV 2 Class II, DIV 1 Simultaneous Presence Luminaire Groups C & D Groups A, B, C, D Groups E, F, G Class I & II XFM T6 = 85 C T4 = 135 C T4 = 135 C T4 = 135 C Lamp Wattages 2 ft. WATTS 4 ft. WATTS T5 14 WATT T5 28 WATT T5HO 24 WATT T5HO 54 WATT 17 WATT 32 WATT HO N/A HO 44 WATT

3 Explosion Proof Fluorescent Light Luminaire Options Stainless Steel Guards Polycarbonate Shields (+/- 1/16" thickness) Description Catalog Number Description Catalog Number Stainless Steel Guard 2 lamp 2ft Stainless Steel Guard 2 lamp 4ft Stainless Steel Guard 3 lamp 4ft Stainless Steel Guard 4 lamp 4ft XFM-4466 XFM-4211 XFM-57 (2) XFM-4211 Polycarbonate Shield 2 lamp 2ft Polycarbonate Shield 2 lamp 4ft Polycarbonate Shield 3 lamp 4ft Polycarbonate Shield 4 lamp 4ft XFM-4464 XFM-4209 XFM-4497 (2) XFM-4209 Mounting Options Mounting Hanger Kits Description Wall & Ceiling Mounting Hanger Kit 2 or 3 lamp Wall & Ceiling Mounting Hanger Kit 4 lamp Drop Mounting Hanger Kit 2 or 3 lamp Drop Mounting Hanger Kit 4 lamp Catalog Number XFM-4401 Option MK - Factory Installed XFM-4405 XFM-4403 Wall/ceiling mount kit For 4 lamp P/N Option MK Must be factory installed Wall/ceiling mount kit For 2 or 3 lamp P/N XFM-4401 Drop mount kit For 2 or 3 lamp P/N XFM-4405 P/N XFM-4403 Emergency Battery Backup Ballast Operation Operates normally on 120V, 277V, 60 Hz or 220V 50 Hz Luminaire switches to charging mode and resumes normal lighting once AC power is restored UL 595, 844, 924, 1598 When power fails the luminaire automatically switches to emergency mode. In emergency mode one lamp will provide safe egress lighting for at least 90 minutes. Features Only available as 4 ft. 2 lamp luminaire Vented battery compartment Explosion proof test switch and charging indicator light Minimum starting temperature 0º C (32º F) Maintenance free emergency ballast/battery pack/charger 575 to 1200 lumen operation (depending on lamp type) 3 year warranty

4 Explosion Proof Fluorescent Light Luminaire Weights 2 Lamp 4 Ft. Fixture Fixture Weight: 40# Shipping Weight: 43# 2 Lamp 4 Ft. Fixture (EMERGENCY) Fixture Weight: 57# Shipping Weight: 60# 2L L 4 4L L L 4 4L 4 3L L 4 4 4L 4 4 2L L 4 2L L 4 / L 4 2L L /8 5/8 (Nominal) Dimensions 2L 2FT.4 Dimensions 4 Lamp Ft. Fixture Fixture Weight: 80# 2L 2 Shipping Weight: 84# 90 2L Lamp 4 Ft. Fixture Fixture Weight: # Shipping Weight: 52# 90 2L 2 2 Lamp 2 Ft. Fixture Fixture Weight: 30# Shipping Weight: 33#

5 Vapor/Dust Proof Lighting Haz-Linear 6 Linear Fluorescent DFP Series Front Access Industrial Vapor/Dust Proof Fluorescent Light Luminaire The DFP Series is a very versatile luminaire that is UL listed for hazardous environments (Class I, Division 2, Groups A, B, C and D and Class II, Division 2, Groups F and G). It is an ideal luminaire for industrial applications, wet locations and task lighting. Optional adjustable mounting brackets allow for precise aiming in multiple angles suitable for most applications. The DFP Series is available in 2, 3, 4, 5 and 6 lamp options, all using a 3/16" tempered glass lens with acrylic and polycarbonate optional lenses. With multiple hub locations, the DFP Series can meet most of your wiring needs. Lamps not included. Listings UL 844 listed U.S. and Canada UL 1598 listed U.S. and Canada for marine locations Class I, Division 2, Groups A, B, C, D Class II, Division 2, Groups F, G Class I, Zone 2, Groups II A & B Class III IP65, wet location 40 C ambient rating 55 C ambient rating for (32 watt luminaires only) Applications Chemical plants Paper mills Tunnels Water treatment Seacoast areas Prep, inspection, sanding Machining areas Coal & dust storage Features Front access luminaire for hazardous locations Hinged front door frame Hinged ballast tray 3/16" tempered glass lens Zinc latches Spring loaded lamp holders standard Sturdy 18 Ga. steel white powder coated housing DFP Series LAMP TYPE 4 LAMP QTY UN VOLTAGE PFT OPTIONS T5 T5HO HO 2 (lamp, 4') 3 (lamp, 4') 4 (lamp, 4') 5 (lamp, 4') 6 (lamp, 4') UN: /60 Hz UN2: /60 Hz*** 34: 347 volt ** 1/2 NPT standard *** UN2 T5HO only For horizontal or ceiling mounted luminaire only PFT: 1/2" NPT hubs at top and side** KH: Adjustable angle mount brackets CX: Cable mount (with 5' cable) PW: 3 wire whip SR: Specular reflector WG: Wire guard F: Fusing A: Acrylic lens P: Polycarbonate lens EM: Emergency battery backup ballast (consult factory) T-Ratings Model Rated Ambient Supply Wiring Class I, Div. 2 Class II, Div. 2 Deg. C Temperature Operating Temperature Code Operating Temperature Code DFP-T T3C (160 C) T4A (120 C) DFP-T5HO T3C (160 C) T4A (120 C) DFP-HO T4A (120 C) T4A (120 C) DFP-* T5 (100 C) T4A (120 C) Lamp Wattages 4 ft. WATTS T5 28 WATT T5HO 54 WATT 32 WATT HO 44 WATT * Note: DFP- with EM option (emergency battery backup) reduces rated ambient to 40 C

6 Vapor/Dust Proof Lighting Dimensions (Nominal) 1/2 NPT BOTH ENDS 1/2 NPT S BRACKETS FOR OPTIONAL MOUNTING KITS HINGED REFLECTOR INTEGRATED ACCESS DOOR HINGE Chain Hang Kit Part Number: DFP-CHAIN "A" ROTARY DRAW LATCHES 51 1/2" HINGED DOOR FRAME Cable Hang Kit Part Number: DFP-CABLE (zinc coated) 53 1/8" QTY 2 cables with toggle ends and QTY 2 self locking gripples "A": chains 52 1/4 between 5 5/16 2 LAMP: 12 3/16" 3 & 4 LAMP: 16 3/16" 5 & 6 LAMP: 20 11/16" Mounting Guide Cable Hang Kit Part Number: DFP-CABLE (zinc coated) QTY 2 cables with toggle ends and Hang QTY 2Kitself locking gripples Cable Part Number: DFP-CABLE 52 1/4 between chains (zinc coated) QTY 2 cables with toggle ends and QTY 2 self locking gripples 52 1/4 between chains Pendant Style Mounting (standard) NOTE: Conduit provided by others Fixture suspended with 1/2 electrical conduit using top hubs on fixture at both ends. between conduit Adjustable Surface Mounting Bracket Kit Part Number: DFP-SURFACE (galvanized) DFP-SURFACESS (stainless steel) Bracket attachment point for optional mounting methods Adjustable Surface Mounting Bracket Kit Part Number: DFP-SURFACE (galvanized) conduit nduit Please ask your Thomas & Betts sales representative for a complete catalog of quality Thomas & Betts electrical DFP-SURFACESS (stainlessforsteel) products or visit us at For customer service, call technical questions, call Bracket attachment point for optional mounting methods Adjustable Surface Mounting Bracket Kit 2013 Thomas & Part Betts Corporation. rights reserved. Printed in the U.S.A. Number: All DFP-SURFACE (galvanized) 08/13/2.5M GM7236 DFP-SURFACESS (stainless steel) Bracket attachment point for optional mounting methods Chain Hang Kit Part Number: DFP-CHAIN Thomas & Betts Corporation Electrical Division 8155 T&B Boulevard Memphis, TN between conduit