DATA SHEET DEA GLOBAL SILVER
|
|
- Calvin Smith
- 7 years ago
- Views:
Transcription
1 DATA SHEET DEA GLOBAL SILVER 09.xx xx.10
2 Classic Performance Advantage Application Field Top productivity for general metrology applications Top accuracy for point-to-point and scanning measurements Top accuracy and throughput for permanent process control Multisensor Technology Optional Standard Standard Temperature Compensation Optional CLIMA CLIMA CLIMA Performance Environment Standard: C, 1 C/h, 2 C/24h Optional CLIMA: C, 1 C/h, 5 C/24h Standard: C, 1 C/h, 2 C/24h CLIMA: C, 1 C/h, 5 C/24h Standard: C, 1 C/h, 2 C/24h CLIMA: C, 1 C/h, 5 C/24h Max. Scanning 300 mm/s 300 mm/s 500 mm/s Performance data are valid if the following specifications are met Standard Temperature Range C Max. air temperature variation 1 C/h - 2 C/24h Max. Spatial Gradient 1 C/m CLIMA Temperature Range C Max. air temperature variation 1 C/h - 5 C/24h Max. Spatial Gradient 1 C/m Probe Configuration for performance test TP: Standard force module, stylus length 10 mm, tip diameter 4 mm TESASTAR-p: Standard force, stylus length 10 mm, tip diameter 4 mm TESASTAR-mp: Standard Force Module, stylus length 10 mm, tip diameter 4 mm LSP-X1s: without extension, stylus length 50 mm, tip diameter 5 mm LSP-X1m/X1h: with an extension of 100 mm, stylus length 20 mm, tip diameter 5 mm LSP-X1c: stylus length 20 mm, tip diameter 5 mm /X5: stylus length 60 mm, tip diameter 5 mm 2 DEA GLOBAL SILVER 09.xx xx.10 DS CMM 036/01 - EN - 11/12
3 Probe Heads and Sensors Technical Characteristics Angular rotation Angular rotation step Rotation speed Positioning repeatability Max. applied torque Extensions TESASTAR-sm Probe Head A axis: +90 / -115 B axis: ± in 2 seconds 0.5 μm 0.6 Nm Max. length 300 mm TESASTAR-m Indexable Probe Head Technical Characteristics LSP-X1c LSP-X5 Resolution <1 µm <1 µm <1 µm Measuring range ± 2 mm in X, Y and Z ± 1 mm in X, Y and Z 1 mm in X, Y and Z Overtravel range ± 2 mm in all axes ± 1.25 mm in all axes ± 1 mm in all axes Linear stiffness 1.2 N/mm 5 N/mm 5 N/mm Stylus joint M3 M5 M5 Max. stylus weight 33 g 150 g 500 g Max. stylus length Vertical: mm Horizontal: up to 50 mm 360 mm 500 mm CMS106 Laser Sensor Technical Characteristics Laser Visible red, class 2, 690 nm Standoff and depth of FOV 170 ± 30 mm Width of FOV user selectable 24, 60, 124 mm Line per second (max) 53 Hz Temperature range of sensor for declared accuracy 15 ~ 32 C Sensor size L x W x H 134 x 72 x 60,5 mm Sensor weight 382 g Probing error (*) F(OT) 60 µm (*) According to VDI 2617 Part 6.2, October 5 edition DEA GLOBAL SILVER 09.xx xx.10 DS CMM 036/01 - EN - 11/12 3
4 DEA GLOBAL Silver Classic , , : Strokes, Dimensions and s Specifications according to ISO :1, second edition and ISO :0 first edition Probe Configuration Standard Temperature Range C CLIMA Temperature Range C (mm/s) Accel. (mm/s 2 ) TS-m, TS-sm/TS-p, TS-mp, TP L/ L/ TS-m, TS-sm/LSP-X1s, m, h + L/ / L/ /68 1 LSP-X1c + L/ / L/ / LX Y LZ 156 Z DZ1 230 DZ SY1 SY2 PY LY X LX LSP-X1c TESASTAR-m TESASTAR-sm Models Strokes Overall Dimensions X Y Z LX LX1 LY LZ Surface Plate Daylights Supports Thd Insert PY DZ DZ1 SY1 SY2 Max. Part CMM DEA GLOBAL SILVER 09.xx xx.10 DS CMM 036/01 - EN - 11/12
5 DEA GLOBAL Silver Performance , , : Strokes, Dimensions and s Specifications according to ISO :1, second edition and ISO :0 first edition Probe Configuration Standard Temperature Range C CLIMA Temperature Range C (mm/s) Accel. (mm/s 2 ) TS-m, TS-sm/TS-p, TS-mp L/ L/ TS-m, TS-sm/TP L/ L/ TS-m, TS-sm/LSP-X1s, m, h + L/ / L/ / L/ / L/ / LX Y LZ 156 Z SY1 SY2 PY LY DZ1 230 DZ X 60 LX TESASTAR-m TESASTAR-sm Models Strokes Overall Dimensions X Y Z LX LX1 LY LZ Surface Plate Daylights Supports Thd Insert PY DZ DZ1 SY1 SY2 Max. Part CMM DEA GLOBAL SILVER 09.xx xx.10 DS CMM 036/01 - EN - 11/12 5
6 DEA GLOBAL Silver Advantage , , : Strokes, Dimensions and s Specifications according to ISO :1, second edition and ISO :0 first edition Probe Configuration Standard Temperature Range C CLIMA Temperature Range C (mm/s) Accel. (mm/s 2 ) TS-m, TS-sm/TS-p, TS-mp L/ L/ TS-m, TS-sm/TP L/ L/ TS-m, TS-sm/LSP-X1s, m, h L/ / L/ /45 /X L/ / L/ /45 LY LX Y Z LZ 2148 DZ1 PZ SY1 SY2 70 X 69 PY LX TESASTAR-sm ( a ) With LSP-X5 probe head, Z stroke = 665 mm TESASTAR-m LSP-X5 Models Strokes Overall Dimensions X Y Z (a) LX LX1 LY LZ Surface Plate Daylights Supports PY PZ DZ1 SY1 SY2 Thd Insert Max. Part CMM DEA GLOBAL SILVER 09.xx xx.10 DS CMM 036/01 - EN - 11/12
7 DEA GLOBAL Silver Performance , 12.10, : Strokes, Dimensions and s Specifications according to ISO :1, second edition and ISO :0 first edition Probe Configuration Standard Temperature Range C CLIMA Temperature Range C (mm/s) Accel. (mm/s 2 ) TS-m, TS-sm/TS-p, TS-mp L/ L/ TS-m, TS-sm/TP L/ L/ TS-m, TS-sm/LSP-X1s, m, h L/ / L/ / L/ / L/ / LX Y Z LZ SY1 SY2 PY LY LZ1 PZ 150 DZ1 70 X TESASTAR-m TESASTAR-sm Models Strokes Overall Dimensions X Y Z LX LY LZ LZ1 Surface Plate Daylights Supports PY PZ DZ1 SY1 SY2 Thd Insert Max. Part CMM DEA GLOBAL SILVER 09.xx xx.10 DS CMM 036/01 - EN - 11/12 7
8 DEA GLOBAL Silver Advantage , 12.10, : Strokes, Dimensions and s Specifications according to ISO :1, second edition and ISO :0 first edition Probe Configuration Standard Temperature Range C CLIMA Temperature Range C (mm/s) Accel. (mm/s 2 ) TS-m, TS-sm/TS-p, TS-mp L/ L/ 2.6 TS-m, TS-sm/TP L/ L/ TS-m, TS-sm/LSP-X1s, m, h L/ / L/ 3.1/45 /X L/ / L/ 3.1/45 LX Y Z LZ1 PZ 150 DZ1 LZ SY1 SY2 PY LY 70 X TESASTAR-sm ( a ) With LSP-X5 probe head, Z stroke =905 mm TESASTAR-m LSP-X5 Models Strokes Overall Dimensions X Y Z (a) LX LY LZ LZ1 Surface Plate Daylights Supports PY PZ DZ1 SY1 SY2 Thd Insert Max. Part CMM DEA GLOBAL SILVER 09.xx xx.10 DS CMM 036/01 - EN - 11/12 8
9 Performance Verification : Maximum Permissible Error of indication for size measurement Measurement of a set of 5 sizes, taken through two opposite probing points on two nominally parallel planes. The set of 5 sizes is placed in 7 different positions/directions within the measuring volume. Each size is measured three times for a total of 105 measurements. All 105 measurement results (100%) must be within the specified. : Maximum permissible probing error A reference sphere is measured with 25 equally distributed probings. The probing performance shall be verified in one single position, located in the middle of the CMM working volume. Using all 25 measurements, compute the Gaussian associated sphere. For each of the 25 measurements, calculate the Gaussian radial distance, R. Calculate the probing error, P, as the range of the 25 Gaussian distances, Rmax - Rmin. The probing error P must be within the stated. : Maximum permissible scanning probing error is the Maximum Permissible Scanning Probing Error of the range of all radii (sphere form error), with high point density and predefined path scanning, where τ is the specified time (in seconds) needed to perform the verification test. The scanning probing performance shall be verified in one single position, located in the middle of the CMM working volume. A reference sphere is measured by scanning four target scan lines to determine the range of the radial distance R. The scanning probing error THP is calculated as the range of radii between the measured centre and all of the assessed scan points. The measured THP and the time needed to perform the scanning test must be within the specified. Technical Characteristics Mechanical Frame: Surface Plate: Sliding System: Measuring System: Temperature Compensation: Ram Counterbalance: Air Supply: X: Micromachined anodized light alloy extrusion Y: Integral dovetail guideways, machined into the table Z: Micromachined anodized light alloy extrusion Material: Granite Part Locking: threaded inserts M8 x 1.25 Flatness: according to DIN 876/III Air bearings on all axes METALLUR linear scales. System Resolution: μm CLIMA: Multisensor Temperature Compensation Technology, C (optional on Classic models) Pneumatic, adjustable Minimum air supply pressure: 0.5 MPa Air consumption: 150 Nl/min Environment: Metrological specification temperature range: Standard: C and CLIMA: C Operating Temperature: C Relative humidity: 20% - 90 % non condensing Probe Heads and Sensors: TESASTAR-m, TESASTAR-sm, LSP-X1c,, LSP-X5 TP, TESASTAR-p, TESASTAR-mp, LSP-X1, CMS106 DEA GLOBAL SILVER 09.xx xx.10 DS CMM 036/01 - EN - 11/12 9
10 Laser Trackers & Stations Portable Measuring Arms BRIDge CMMs Horizontal Arm CMMs Gantry CMMs Multisensor & Optical Systems White light scanners Ultra High Accuracy CMMS sensors Precision Measuring Instruments Software Solutions Hexagon Metrology offers a comprehensive range of products and services for all industrial metrology applications in sectors such as automotive, aerospace, energy and medical. We support our customers with actionable measurement information along the complete life cycle of a product from development and design to production, assembly and final inspection. With more than 20 production facilities and 70 Precision Centers for service and demonstrations, and a network of over 100 distribution partners on five continents, we empower our customers to fully control their manufacturing processes, enhancing the quality of products and increasing efficiency in manufacturing plants around the world. Hexagon Metrology is part of Hexagon (Nordic exchange: HEXA B). Hexagon is a leading global provider of design, measurement and visualisation technologies that enable customers to design, measure and position objects, and process and present data. Learn more at For more information, visit Hexagon Metrology. Part of Hexagon All rights reserved. Due to continuing product development, Hexagon Metrology reserves the right to change product specifications without prior notice. Printed in Germany. June 2013
PRODUCT BROCHURE 7.10.7 SF. Shop-Floor Coordinate Measuring Machine
PRODUCT BROCHURE 7.10.7 SF Shop-Floor Coordinate Measuring Machine HEXAGON METROLOGY 7.10.7 SF Quality Insight at the Point of Production The Hexagon Metrology 7.10.7 SF is like a machine tool for quality
More informationPRODUCT BROCHURE SPATIAL ANALYZER. Powerful, traceable and easy-to-use metrology and analysis software
PRODUCT BROCHURE SPATIAL ANALYZER Powerful, traceable and easy-to-use metrology and analysis software SPATIAL ANALYZER SpatialAnalyzer (SA) is a powerful, traceable and easy to use metrology and analysis
More informationTypes of 3D Scanners and 3D Scanning Technologies.
Types of 3D Scanners and 3D Scanning Technologies. There are many types of 3D scanners and 3D scanning technologies. Some are ideal for short range scanning while others are better suited for mid or long
More informationENGINEERING METROLOGY
ENGINEERING METROLOGY ACADEMIC YEAR 92-93, SEMESTER ONE COORDINATE MEASURING MACHINES OPTICAL MEASUREMENT SYSTEMS; DEPARTMENT OF MECHANICAL ENGINEERING ISFAHAN UNIVERSITY OF TECHNOLOGY Coordinate Measuring
More informationSCS Directory Accreditation number: SCS 0115
International standard: ISO/IEC 17025:2005 Swiss standard: SN EN ISO/IEC 17025:2005 METRON SA Calibration Laboratory Via Luserte Sud 7 CH-6572 Quartino Head: Angelo Capone Responsible for MS: Angelo Capone
More informationMaking Better Medical Devices with Multisensor Metrology
Making Better Medical Devices with Multisensor Metrology by Nate J. Rose, Chief Applications Engineer, Optical Gaging Products (OGP) Multisensor metrology is becoming a preferred quality control technology
More informationAutomotive Applications of 3D Laser Scanning Introduction
Automotive Applications of 3D Laser Scanning Kyle Johnston, Ph.D., Metron Systems, Inc. 34935 SE Douglas Street, Suite 110, Snoqualmie, WA 98065 425-396-5577, www.metronsys.com 2002 Metron Systems, Inc
More informationLength, Finland, MIKES (VTT Technical Research Centre of Finland Ltd, Centre for Metrology / Mittatekniikan keskus)
absolute mise en pratigue: mise en pratigue: absolute absolute Level or Range 633 633 nm 0.04 fm 2 95% No 1 474 474 THz 24 khz 2 95% No 1 532 532 nm 0.08 fm 2 95% No 50 563 563 THz 0.08 MHz 2 95% No 51
More informationL-LAS-TB-CL serie. laser light curtains for inline measuring tasks
L-LAS-TB-CL serie laser light curtains for inline measuring tasks Maximum distance 2.000 mm Measurement range 6 up to 98 mm Resolution up to 4 µm up to 1,5 khz scan rate 0-10 V or 4-20 ma analogue output
More informationDMS 680. Universal length measuring system gauge inspection for»iso 9000«requirements
DMS 680 Universal length measuring system gauge inspection for»iso 9000«requirements Universal length measuring system DMS 680 Wide range of applications For periodic inspection of gauges, reference gauges,
More informationPCB Component Placement Inspection
Executive Summary PCB Component Placement Inspection Optimet s ConoProbe Mark10 HD with a 50 mm focal length lens was used to inspect PCB component placement. The PCB board inspected contained both individual
More informationOn an equal level: CT measurements reach the accuracy of conventional tactile metrology
Comparison of CMM with different sensors On an equal level: CT measurements reach the accuracy of conventional tactile metrology 08.07.2015 Dienste industrielle Messtechnik GmbH; Im Klauenfuß 9, 74172
More information[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining
[ E[M]CONOMY] means: Save time, money and space! MAXXMILL 500 Vertical milling center for 5-side machining MAXXMILL 500 MAXXMILL 500 is the ideal vertical milling center for the for the 5-axis operation
More informationRenishaw 2008. apply innovation TM. Calibrating 5-axis machines to improve part accuracy. 5Align
Calibrating 5-axis machines to improve part accuracy 5Align Productive Process Pyramid TM Understanding and tracking machine behaviour Process verification Thermal compensation In-cycle process control
More informationTHE OPTICAL CMM 3D SCANNERS FOR INDUSTRIAL APPLICATIONS
METROLOGY SOLUTIONS THE OPTICAL CMM 3D SCANNERS FOR INDUSTRIAL APPLICATIONS PORTABLE 3D MEASUREMENT SOLUTIONS The arm-free handheld MetraSCAN 3D line-up of optical CMM 3D scanning systems and the C-Track
More informationHexagon Metrology & UHA Product Line 2012-09
Hexagon Metrology & UHA Product Line 2012-09 2 Content: Hexagon Group Hexagon Metrology Ultra High Accuracy CMMs Die Hexagon Gruppe 3 Hexagon Divisions Measurement of Environment and Infrastructure 4 High
More informationLinear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors
20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical
More informationleica absolute tracker at901
PRODUCT BROCHURE leica absolute tracker at901 Top performance 6DoF laser tracker Leica Absolute Tracker AT901 with PowerLock. Simply the Best. The Leica Absolute Tracker AT901 is a portable measurement
More informationRIEGL VQ-480. Airborne Laser Scanning. Airborne Laser Scanner with Online Waveform Processing. visit our website www.riegl.com
Airborne Laser Scanner with Online Waveform Processing RIEGL VQ-48 high-accuracy ranging based on echo digitization and online waveform processing high laser repetition rate - fast data acquisition multiple
More informationDryLin ZLW Belt Drive
Belt Drive +50º 0º DryLin toothed belt drives have been developed for the fast positioning of small loads. The linear units with toothed belt drive are corrosion resistant, light and compact, besides having
More informationWho are we. Engineering & Quality. Elements & Moulds. Verification. Approx. 800 employees. Approx.330 employees. Approx. 26 employees.
Who are we Engineering & Quality Elements & Moulds Verification Approx. 800 employees Approx.330 employees Approx. 26 employees Management Zeiss Manual Calibration Specialists 2012 The LEGO Group Page
More informationForce measurement. Forces VECTORIAL ISSUES ACTION ET RÉACTION ISOSTATISM
Force measurement Forces VECTORIAL ISSUES In classical mechanics, a force is defined as "an action capable of modifying the quantity of movement of a material point". Therefore, a force has the attributes
More informationGuideline Laser Series
Guideline Laser Series Highly visible alignment laser for visually demanding surfaces Red / Green long visible lines Equal brightness across length of the line Uniform Line (no fading at ends of the line)
More informationLarsLap model C for cutting, milling grinding and lapping seats and flanges on globe, safety and control valves
LarsLap model C for cutting, milling grinding and lapping seats and flanges on globe, safety and control valves As a rule, control and reduction valves of the globe type have an integrated plug that narrowly
More informationProfile rail guides LLR
Profile rail guides LLR Content The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as the hallmark of quality bearings throughout
More informationCOMPUTATIONAL ACCURACY ANALYSIS OF A COORDINATE MEASURING MACHINE UNDER STATIC LOAD
COMPUTATIONAL ACCURACY ANALYSIS OF A COORDINATE MEASURING MACHINE UNDER STATIC LOAD Andre R. Sousa 1 ; Daniela A. Bento 2 CEFET/SC Federal Center of Technological Education Santa Catarina Av. Mauro Ramos,
More informationArm2. Arm Arm22. Articulated Arm. machines MEASURING. tridimensional measuring FRATELLI ROTONDI
Arm Arm22 2 Arm2 tridimensional measuring Articulated Arm MEASURING machines FRATELLI ROTONDI Arm2 MEASURING Arm2Arm2 SOFTWARE Software in WINDOWS environment: sura tridimesio - elements with definite
More informationIndustrial Robotics. Training Objective
Training Objective After watching the program and reviewing this printed material, the viewer will learn the basics of industrial robot technology and how robots are used in a variety of manufacturing
More informationHow To Measure Contactless Measurement On A Robot
Thickness and surface area measurements in free space Jan Reinder Fransens Overview Introduction Irmato Contactless measurement Current system Control software White light sensor Free form measurement
More informationBoWex SD, SD1 and SD2 Operating-/Assembly Instructions
D-807 Rheine 0111 E 1 curved-tooth gear couplings are flexible shaft connections. They are able to compensate for shaft displacement caused by, as an example, inaccuracies in production, heat expansion,
More informationIntegration Services
Integration Services EXPERIENCED TEAM ADVANCED TECHNOLOGY PROVEN SOLUTIONS Integrations for large scale metrology applications Metris metrology to streamline your CAPABILITIES Advanced systems design Engineering
More informationTorque Transducers MEASURING ELECTRONIC
Screwdriving technology Automation Air motors Air tools MEASURING ELECTRONIC Torque Transducers In most situations, the essential element of screwdriving technology is torque. Controlling the torque generated
More informationNational Performance Evaluation Facility for LADARs
National Performance Evaluation Facility for LADARs Kamel S. Saidi (presenter) Geraldine S. Cheok William C. Stone The National Institute of Standards and Technology Construction Metrology and Automation
More informationIndustrial Metrology and Engineering Applications in the Wind Turbine Industry
Industrial Metrology and Engineering Applications in the Wind Turbine Industry 1. Company Introduction M-7 Technologies is a privately owned, ISO 9001 certified company offering engineered solutions for
More informationIntroduction to Accuracy and Repeatability in Linear Motion Systems
Introduction to accuracy and repeatability in linear motion systems By Gary Rosengren, Director of Engineering Tolomatic, Inc. About the Author Gary Rosengren is Director of Engineering at Tolomatic and
More informationQuick Reference Catalog
Gearboxes Turrets Y-Axis Rotary Tools Tool Discs B-Axis Quick Reference Catalog WWW.BARUFFALDI.IT TB Servo Turret SERVO MOTOR TURRETS TB-type turrets rotate thanks to a BRUSHLESS SERVO MOTOR controlled
More informationAlignment Laser System.
- O T 6 0 0 0 Alignment Laser System. The OT-6000. Multi -Target,Two Dimensional Alignment. Introducing the most powerful way to measure alignment at distances up to 300 feet. The OT-6000 Alignment Laser
More informationHow To Use A Corona Mdi 110
CORONA MDI 110 APPLICATION Domestic water meter FEATURES 4 Modular multi-jet domestic meter with inductive scanning (without magnetic influence) 4 System capability, with standard applicable pulse output
More informationSubminiature Load Cell Model 8417
w Technical Product Information Subminiature Load Cell 1. Introduction... 2 2. Preparing for use... 2 2.1 Unpacking... 2 2.2 Using the instrument for the first time... 2 2.3 Grounding and potential connection...
More informationProducts. Air Bearing- Linear systems 06-2009 EITZENBERGER. Luftlagertechnik GmbH. Feichtmayrstraße 17 D-82405 Wessobrunn
Products Air Bearing- Linear systems 06-2009 ITZNBRGR D- mail: URL. Index - Air Bearing linear Systems Z 0526 Air Bearing Linear Stage with high resolution encoder and iron free linear motor Z 0512 XY-Air
More informationBarcode Reader Series BCL 31, BCL 32, BCL 34
P R O D U C T I N F O R M A T I O N Barcode Reader Series BCL 31, BCL 32, BCL 34 BCL 31, BCL 32 and BCL 34: Barcode readers for universal use in conveyor and storage technology. 3 models: numerous advantages.
More informationLoewe GK Installation and operating manual
SCHMIDT-KUPPLUNG GmbH Loewe GK Installation and operating manual Loewe GK Loewe GK: angular and radial displacement compensation combined with axial stiffness. The compact coupling combines angular and
More informationALTERA. Coordinate Measuring Machines. nikon metrology I vision beyond precision
ALTERA Coordinate Measuring Machines nikon metrology I vision beyond precision ALTERA Excellence Coordinate Measuring Machines Unique accuracy guarantee Nikon Metrology is the only manufacturer to guarantee
More informationProper Implementation of Industrial CT Scanning to Reduce Inspection Costs & Get to Production Faster. Jesse Garant, JG&A Metrology Center
Proper Implementation of Industrial CT Scanning to Reduce Inspection Costs & Get to Production Faster Jesse Garant, JG&A Metrology Center Traditional Metrology and Inspection Tactile Devices (Touch Probe)
More informationSCHMIDT ManualPress 300 Series Manual Presses with Process Monitoring
Manual Presses with Process Monitoring Process reliability, force/stroke monitoring of the joining process and EN ISO- compatible documentation of the results are becoming the major factors for small and
More informationELEMENTS OF SOFTWARE INTEGRATION OF PRODUCTION SYSTEMS IN INDUSTRIAL PRODUCT CONTROL AND DIDACTICS 1. INTRODUCTION
Journal of Machine Engineering, Vol. 13, No. 4, 2013 part inspection, coordinate instruments, optical scanner Halina NIECIĄG 1 Piotr DUDEK 1 ELEMENTS OF SOFTWARE INTEGRATION OF PRODUCTION SYSTEMS IN INDUSTRIAL
More information3D laser removal and texturing in a new dimension
www.dmgmori.com LASERTEC 45 Shape 3D material removal by laser Laser texturing LASERTEC 45 Shape 3D laser removal and texturing in a new dimension LASERTEC LASERTEC 45 Shape: High-precision 3D laser removal
More informationMachine Tool Inspection & Analyzer solutions
Machine Tool Inspection & Analyzer solutions Introduction IBS Precision Engineering machine tool inspection series offers a range of products to provide peace of mind and control to machine operators by
More informationSeries 6000 Torque measured metal bellow coupling
Properties Free of float metal bellow coupling with integrated torque measurement Non-contact measurement system, high robustness High torsional stiffness Limited torque of inertia Performance Measurement
More informationPrecision Miniature Load Cell. Models 8431, 8432 with Overload Protection
w Technical Product Information Precision Miniature Load Cell with Overload Protection 1. Introduction The load cells in the model 8431 and 8432 series are primarily designed for the measurement of force
More informationLinear Systems. Main Catalog
Linear Systems Main Catalog MOVITEC Linear Systems The Italian company Impex Tecniche Lineari designs and manufactures a wide range of products under the brand name MOVITEC: Electromechanical and pneumatic
More informationIndustrial Metrology from Carl Zeiss. Contour and Surface Measuring Machines
Industrial Metrology from Carl Zeiss Contour and Surface Measuring Machines Overview Inspection equipment from Carl Zeiss for the production floor. Carl Zeiss offers a complete product line for industrial
More informationInternational Journal of Engineering Research-Online A Peer Reviewed International Journal Articles available online http://www.ijoer.
RESEARCH ARTICLE ISSN: 2321-7758 DESIGN AND DEVELOPMENT OF A DYNAMOMETER FOR MEASURING THRUST AND TORQUE IN DRILLING APPLICATION SREEJITH C 1,MANU RAJ K R 2 1 PG Scholar, M.Tech Machine Design, Nehru College
More informationSEM/FIB Workbench. Klocke Nanotechnik. Microtechnology Network. Motion from the Nanoworld. One of 279 members in a. Pascalstr. 17 Aachen, Germany
Intro_0 SEM/FIB Workbench Motion from the Nanoworld One of 279 members in a Pascalstr. 17 Aachen, Germany Microtechnology Network Centimeter Stroke Atomic Resolution Modular Nanorobotics Modular Nanorobotics
More informationBar code scanners CLV45x / CLV450 / Standard Density
ONLINE DATA SHEET www.mysick.com Bar code scanners CLV45x / CLV450 / Standard Density CLV450-0010 Bar code scanners CLV45x / CLV450 / Standard Density Model Name > CLV450-0010 Part No. > 1018556 At a glance
More informationLOCATION DEPENDENCY OF POSITIONING ERROR IN A 3-AXES CNC MILLING MACHINE
th International & 26 th All India Manufacturing Technology, Design and Research Conference (AIMTDR 214) December 12 th 14 th, 214, IIT Guwahati, Assam, India LOCATION DEPENDENCY OF POSITIONING ERROR IN
More informationHCW 1000 NEW TYPE OF LIGHT MACHINE FROM SKODA
HCW 1000 NEW TYPE OF LIGHT MACHINE FROM SKODA INTRODUCTION HCW 1000 ŠKODA MACHINE TOOL a.s. continues its more than 100 years old tradition of high-precision machine tool manufacturing. Based on market
More informationABERLINK 3D MKIII MEASUREMENT SOFTWARE
ABERLINK 3D MKIII MEASUREMENT SOFTWARE PART 1 (MANUAL VERSION) COURSE TRAINING NOTES ABERLINK LTD. EASTCOMBE GLOS. GL6 7DY UK INDEX 1.0 Introduction to CMM measurement...4 2.0 Preparation and general hints
More informationROV Data Collection Results
ROV Data Collection Results Data is processed and displayed din seconds through the ROV communications channels The operator can view the results while the ROV isinposition in anddetermine determine ifadditionaldata
More informationDMU 75 / 95 monoblock
www.dmgmori.com Five-axis universal milling machines DMU 75 / 95 monoblock High tech as standard Five-axis simultaneous machining at the best price. DMU 75 / 95 monoblock Top features for five-axis simultaneous
More informationApplication Example: Quality Control of Injection-Molded Parts
Application Example: Quality Control of Injection-Molded Parts Measuring Systems: ATOS Keywords: Optical 3D measuring technology, mold try-out, first article inspection, form and dimension inspection of
More informationPrecise heavy-duty cutting
PR 130 / PR 150 / PR 160 / PR 180 / PR 200 / PR 260 Precise heavy-duty cutting P-SERIES K-SERIES T-SERIES MILLFORCE 02 / Fields of application 03 / Machine concept 04 / Machine technology 05 / Options
More informationKS-70. Catheterization Table GENERAL
PD505-009A Catheterization Table KS-70 GENERAL This Catheterization Table KS-70, which is combined with X-ray high voltage generator, X-ray tube assembly, X-ray image system (Image Intensifier, Flat Panel
More informationSelecting and Sizing Ball Screw Drives
Selecting and Sizing Ball Screw Drives Jeff G. Johnson, Product Engineer Thomson Industries, Inc. Wood Dale, IL 540-633-3549 www.thomsonlinear.com Thomson@thomsonlinear.com Fig 1: Ball screw drive is a
More informationŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW
ŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW KODA HCW TRADITION AND EXPERIENCE The ŠKODA machine tools of different types and design have been present in the world market since the
More informationGeometric Camera Parameters
Geometric Camera Parameters What assumptions have we made so far? -All equations we have derived for far are written in the camera reference frames. -These equations are valid only when: () all distances
More informationPerthometer. Surface Texture Parameters New Standards DIN EN ISO / ASME
Perthometer. Surface Texture Parameters New Standards DIN EN ISO / ASME MAHR GMBH, Germany - EDITION 09/01/99 Contents Real surface... Geometrical Product Specification Definition Profile filter P t Profile
More informationA NEW LOOK AT RISLEY PRISMS. By Craig Schwarze Senior Systems Engineer OPTRA Inc.
As seen in Photonics Spectra June 2006: A NEW LOOK AT RISLEY PRISMS By Craig Schwarze Senior Systems Engineer OPTRA Inc. Introduction With laser beams finding more and more applications that require aiming
More informationMINIMAT-EC-Servo Screwdriver Spindles
Screwdriving technology Automation Air motors Air tools Screwdriver Spindles electric MINIMAT-EC-Servo Screwdriver Spindles Maximum Flexibility and process Control Straight Spindle Form - Torque range
More informationHow To Fuse A Point Cloud With A Laser And Image Data From A Pointcloud
REAL TIME 3D FUSION OF IMAGERY AND MOBILE LIDAR Paul Mrstik, Vice President Technology Kresimir Kusevic, R&D Engineer Terrapoint Inc. 140-1 Antares Dr. Ottawa, Ontario K2E 8C4 Canada paul.mrstik@terrapoint.com
More informationIP-S2 Compact+ 3D Mobile Mapping System
IP-S2 Compact+ 3D Mobile Mapping System 3D scanning of road and roadside features Delivers high density point clouds and 360 spherical imagery High accuracy IMU options without export control Simple Map,
More informationWe bring quality to light. MAS 40 Mini-Array Spectrometer. light measurement
MAS 40 Mini-Array Spectrometer light measurement Features at a glance Cost-effective and robust CCD spectrometer technology Standard USB interface Compatible with all Instrument Systems measuring adapters
More informationSection. Tolerances. Aluminum Extrusion Manual. 4th Edition
Section 8 Tolerances Aluminum Extrusion Manual 4th Edition Section 8 How straight is straight enough? How flat is flat enough? How uniform must a wall thickness be in order to be acceptable? These are
More informationInspection of diffusely reflecting surfaces
surfacecontrol Inspection of diffusely reflecting surfaces 2 Surface control with fringe projection 3 Industrial surface inspection Requirements High quality finished surfaces are a challenge for many
More informationSeries 7500 Torque Sensor
Properties PTO (Power Take-Off) shaft with integrated torque and angle measurement Non-contact measurement system, high robustness Plug & Play solution, no additional electronics required Performance Measurement
More informationStackFlowMaster FPD580 TORBAR probe Stack gas metering systems. Measurement made easy. Introduction. For more information
Commissioning instructions CI/FPD580/A EN StackFlowMaster FPD580 TORBAR probe Stack gas metering systems Measurement made easy Introduction This publication provides commissioning instructions for the
More informationCross-beam scanning system to detect slim objects. 100 mm 3.937 in
891 Object Area Sensor General terms and conditions... F-17 Related Information Glossary of terms... P.1359~ Sensor selection guide...p.831~ General precautions... P.1405 PHOTO PHOTO Conforming to EMC
More informationCNC MILLING TECHNOLOGY FOR THE JEWELER- AND GOLDSMITH HANDCRAFT:
:: precise. individual. economic. CNC MILLING TECHNOLOGY FOR THE JEWELER- AND GOLDSMITH HANDCRAFT: made in Germany Welcome to the world of imes-icore. Productivity and economy redefined! imes-icore is
More informationT-SERIES INDUSTRIAL INCLINOMETER ANALOG INTERFACE
T-SERIES INDUSTRIAL INCLINOMETER ANALOG INTERFACE T-Series industrial inclinometers are compact high performance sensors used to determine inclination in roll and pitch axes with excellent precision and
More informationMachine tools. Milling- and boring machines
Milling- and boring machines Milling- and boring machines Our family owned company develops and manufactures customized machines and designs machine tools based on work piece requirements successfully
More informationSunnyMec 3000 The innovative bi-axial PV tracker Data Sheet
SunnyMec 3000 The innovative bi-axial PV tracker Data Sheet Rel. 00 Gen. 2010 Pagina 1 di 10 TECHNICAL DATA Sunnymec 3000 Installed photovoltaic power ( standard efficiency module 12...14 % ) 2,3 to 3,1
More informationMaterial test chamber with mechanical convection
FP series 400 Material test chambers Material test chamber with mechanical convection A BINDER material test chamber with mechanical convection of the FP series provides reliably short drying times and
More informationSilicon Pyranometer Smart Sensor (Part # S-LIB-M003)
(Part # S-LIB-M003) The smart sensor is designed to work with the HOBO Weather Station logger. The smart sensor has a plug-in modular connector that allows it to be added easily to a HOBO Weather Station.
More informationSENSORS. Fiber Optic Sensors - S70. Advanced fiber optic amplifiers for high speed and low contrast applications
Fiber Optic Sensors - S7 Advanced fiber optic amplifiers for high speed and low contrast applications DIN rail mountable models with dual digital displays speed models: 2 μs...5 ms Super high speed models:
More information5-Axis Test-Piece Influence of Machining Position
5-Axis Test-Piece Influence of Machining Position Michael Gebhardt, Wolfgang Knapp, Konrad Wegener Institute of Machine Tools and Manufacturing (IWF), Swiss Federal Institute of Technology (ETH), Zurich,
More informationMeasuring thermal drift of machine tools
Measuring thermal drift of machine tools dr.ir. G.H.J. Florussen 19 th November 2015, Precisiebeurs, Veldhoven IBS Precision Engineering bv, Esp 201, 5633 AD Eindhoven Tel : + 31 (0)40 290 1270, Fax +
More informationT-REDSPEED White paper
T-REDSPEED White paper Index Index...2 Introduction...3 Specifications...4 Innovation...6 Technology added values...7 Introduction T-REDSPEED is an international patent pending technology for traffic violation
More informationBARREL ALIGNMENT- A CRITICAL FACTOR IN REDUCING EXTRUDER WEAR
BARREL ALIGNMENT- A CRITICAL FACTOR IN REDUCING EXTRUDER WEAR Jeff A. Myers- BARR Inc., Onsted, MI Mike Puhalla Milacron, Batavia, OH Abstract As processors increase the demand on the extruder for increased
More informationGrazing incidence wavefront sensing and verification of X-ray optics performance
Grazing incidence wavefront sensing and verification of X-ray optics performance Timo T. Saha, Scott Rohrbach, and William W. Zhang, NASA Goddard Space Flight Center, Greenbelt, Md 20771 Evaluation of
More informationVdS 2100-09en. VdS Guidelines for water extinguishing systems. Non-return valves. Requirements and test methods. VdS 2100-09en : 2011-05 (01)
VdS Guidelines for water extinguishing systems VdS 2100-09en Requirements and test methods VdS 2100-09en : 2011-05 (01) Publishing house: VdS Schadenverhütung GmbH Amsterdamer Str. 172-174 50735 Köln,
More informationMounting Instructions for SP4 Power Modules
Mounting Instructions for SP4 Power Modules Pierre-Laurent Doumergue R&D Engineer Microsemi Power Module Products 26 rue de Campilleau 33 520 Bruges, France Introduction: This application note gives the
More informationBar Code Reader Series BCL 20 A flexible reader for a variety of applications
Bar Code Reader Series BCL 20 A flexible reader for a variety of applications PRODUCT INFORMATION The benchmark for flexibility. Laser scanners of the BCL 20 series as variable as your requirements demand.
More informationVolume Measurement. TexVol BVM-L Series. Accurate Volume in seconds
Volume Measurement TexVol BVM-L Series Accurate Volume in seconds The BVM-L Series - save time and get reliable results Ever since industrialized food production began, producers have worked hard to ensure
More informationLength measuring instruments
INTERNATIONAL OIML R 66 RECOMMENDATION Edition 1985 (E) Length measuring instruments Instruments mesureurs de longueurs OIML R 66 Edition 1985 (E) ORGANISATION INTERNATIONALE DE MÉTROLOGIE LÉGALE INTERNATIONAL
More informationINTERNATIONAL HOCKEY FEDERATION PERFORMANCE REQUIREMENTS AND TEST PROCEDURES FOR HOCKEY BALLS. Published: April 1999
INTERNATIONAL HOCKEY FEDERATION PERFORMANCE REQUIREMENTS AND TEST PROCEDURES FOR HOCKEY BALLS Published: April 1999 CONTENTS 1 Introduction 2 Test Procedures General 3 Standards and Specific Test Procedures
More informationHow To Use Bodescan For 3D Imaging Of The Human Body
«Bodescan» THE ULTIMATE 3D SCANNER FOR DATA ACQUISITION OF HUMAN BODY A COMPREHENSIVE SYSTEM INCLUDING HARDWARE AND SOFTWARE TOOLS Page 2 of 9 Bodescan HUMAN BODY3D SCANNING HARDWARE AND SOFTWARE INCLUDED
More informationROTEX SD shiftable jaw coupling
4014 E 1 SD shiftable jaw coupling Schutzvermerk Gezeichnet: 14.08.06 Sha Ersatz für: vom 9.07.85 4014 E SD is a torsionally flexible jaw coupling shiftable at standstill. It is able to compensate for
More informationMicro-CT for SEM Non-destructive Measurement and Volume Visualization of Specimens Internal Microstructure in SEM Micro-CT Innovation with Integrity
Micro-CT for SEM Non-destructive Measurement and Volume Visualization of Specimens Internal Microstructure in SEM Innovation with Integrity Micro-CT 3D Microscopy Using Micro-CT for SEM Micro-CT for SEM
More informationDUGARD. Machine Tools Since 1939. Dugard ECO Series Driven Tool, Slant Bed CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 ECO Series Driven Tool, Slant Bed CNC Lathes www.dugard.com ECO Series - CNC Lathes Amazing speed, power, precision and durability all at an affordable price Rigid and Trustworthy
More information