EasyPact TVS control relays

Transcription

1 EasyPact TVS Motor starters, ors & relays up to 630 A CPB CPB CPB Contact Coil V AC/Hz 50 Hz 50 Hz 50 Hz 24 CAE40B5 CAE22B5 CAE31B5 48 CAE40E5 CAE22E5 CAE31E5 110 CAE40F5 CAE22F5 CAE31F5 220 CAE40M5 CAE22M5 CAE31M5 240 CAE40U5 CAE22U5 CAE31U5 380 CAE40Q5 CAE22Q5 CAE31Q5 415 CAE40N5 CAE22N5 CAE31N5 0 CAE40R5 CAE22R5 CAE31R5 Characteristics > 4 NO/NC s. > Weight: kg. C-1

2 Characteristics Control circuit characteristics Type Rated control circuit voltage (Uc) V Control voltage limits Operation Coil type: 50 Hz Uc Average consumption at 20 C and at Uc Operating time (rated control circuit voltage, ambient temperature 20 C) Momentary supply failure Drop-out Uc a 50 Hz VA Sealed and closed: 70 Between coil energisation and Between coil de-energisation and opening of the N/C closing of the N/O opening of the N/C closing of the N/O Maximum power-off time without Maintain: 8 ms Maximum operating rate Operating cycles per second 3 Mechanical durability In millions of operating cycles Control connection (coil) Connecting to screw clamp terminals Coil type: 50 Hz 10 with cable end Solid cable conductor mm Tightening torque N.m 1.2 Characteristics of built in instantaneous s Number of s 4 Rated operational voltage (Ue) Rated insulation voltage (Ui) Conventional thermal current (lth) Operating current frequency Minimum switching capacity Up to V 690 Conforming to IEC Operational environment temperature y 40 C 2 A 10 Hz 50 U min V 17 l min ma 5 Short-circuit protection Conforming to IEC A gg fuse: 10 A Rated making capacity Conforming to IEC A a: 0 Short-time rating Permissible for 500 ms A ms 0 Insulation resistance > 10 Non-overlap time Guaranteed non-overlap between N/C and N/O s Tightening torque Philips n 2 N.m 1.2 Non-overlap distance Instantaneous s connection Connecting to screw clamp terminals with cable end Solid cable ms 1 conductor mm Tightening torque N.m on energisation and on de-energisation Contact LAENpp connecting with auxiliary s C-2

3 Characteristics Environment Type Rated insulation voltage (Ui) Rated impulse withstand voltage (Uimp) Conforming to IEC V 690 Conforming to IEC kv 6 Electrical insulation IEC Up to 400 V reinforced insulation Conforming to standards IEC GOST Protective treatment Conforming to IEC "TH" Degree of protection Conforming to IEC IP20 Ambient air temperature around the device Storage C UC For operation at Uc Maximum operating altitude Without derating m 3000 Operating position Without derating in the following positions Shock resistance (1) 1/2 sine ware, 11 ms Vibration resistance (1) Hz Control relay open Control relay closed Control relay open Control relay closed 7 gn 10 gn 1.5 gn 3 gn (1) C-3

4 Mounting dimension Control relays and auxiliary blocks CAEpp LAERCp 90 c1 CAE c c1 with LAEN CAE On mounting plate AM1-P 2 x Ø4.8 2 x Ø C G c 80 G 35 CAE40 CAE31 CAE22 A2 A /NO 34 33/NO 22 21/NC 34 33/NO 22 21/NC 32 31/NC C-4

5 Accessories Auxiliary blocks RC suppressor CAEppp LAERCp LAENp 2 s LAENp 4 s Instantaneous auxiliary blocks For use in normal operating environments Number of s Maximum number of relays that can be mounted Front mounted Side mounted Composition Cat. no. Weight NO NC kg LAEN LAEN LAEN LAEN Coil suppressor modules RC suppressor b Effective protection for circuits highly sensitive to "high frequency" interference and transcient generates when the or coil is switched off. For use only in cases where the voltage is virtually sinusoidal, i.e. less than 5 % total harmonic distortion. b Voltage limited to 3 Uc max. and oscillating frequency limited to 400 Hz max. b Slight increase in drop-out time (1.2 to 2 times the normal time). Mounted on Operational voltage Cat. no. Weight kg CAE40pp a V LAERCE a V LAERCU a V LAERCG a V LAERCN C-5