Solid Ink - Black, Magenta, Cyan, Yellow

Transcription

1 Page 1 / 6 Safety Data Sheet SDS # : S-9504 Solid Ink - Black, Magenta, Cyan, Yellow Issuing Date Revision Date Version 1 1. Product and Company Identification Trade Name: Part. Solid Ink for Phaser 8500, Phaser 8550, Phaser 8560, Phaser 8560MFP 108R00668, 108R00669, 108R00670, 108R00671, 108R00672, 108R00687, 108R00688, 108R00689, 108R00690, 108R00706, 108R00707, 108R00708, 108R00709, 108R00723, 108R00724, 108R00725, 108R00726, 108R00727, 108R00764, 108R00765, 108R00766, 108R00767, 108R00768, 108R00898, 108R00899, 108R00900, 108R00901, 108R00902, 108R00903, 108R00904, 108R00905, 108R00906, 108R00907 Color Pure substance/preparation Identified uses Black, Magenta, Cyan, Yellow Preparation Xerographic printing Manufactured by: Xerox Corporation, Office Group P.O. Box 1000 Wilsonville, OR Emergency telephone Safety Information (800) Health Emergency (585) Chemical Emergency only (Chemtrec) (800) (703) (collect outside the US or Canada) 2. Hazards Identification Emergency Overview The product contains no substances which, in the form utilized and at their given concentrations, are considered to be hazardous to health. Color Black, Magenta, Cyan, Yellow Appearance Wax like Physical state Solid Odor Faint Classification of the substance or mixture Consumers GHS - Classification t classified GHS Label elements, including precautionary statements Symbol(s) ne

2 SDS # : S-9504 Page 2 / 6 Signal Word ne Other hazards which do not result in classification ne known Potential Health Effects Principle Routes of Exposure Skin contact Acute toxicity Eyes t expected to be an irritant Skin t expected to be an irritant Inhalation Ingestion Chronic effects Main symptoms known effects under normal use conditions Aggravated Medical Conditions ne under normal use conditions Environmental hazard See Section 12 for additional Ecological Information. 3. Composition/Information on Ingredients Chemical Name CAS- Weight % Polyethylene and fatty amide waxes PROPRIETARY Resin PROPRIETARY 5-20 Dyes PROPRIETARY <5 4. First Aid Measures General advice Eye contact Skin contact Inhalation Ingestion tes to physician Protection of first-aiders When symptoms persist or in all cases of doubt seek medical advice. Show this material safety data sheet to the doctor in attendance. t an expected route of exposure Wash off with plenty of water Wash off with warm water and soap Treat symptomatically special protective equipment required. 5. Fire-Fighting Measures Flammable properties Combustible material: may burn but does not ignite readily Flash point > 221 C / > 429 F Method Pensky-Martens closed tester

3 SDS # : S-9504 Page 3 / 6 Suitable extinguishing media Unsuitable extinguishing media Hazardous combustion products Explosion Data Sensitivity to Mechanical Impact Sensitivity to Static Discharge Dry powder, Carbon dioxide (CO2), Halons information available May emit toxic fumes under fire conditions t impact sensitive t sensitive Specific hazards arising from the chemical information available Protective Equipment and Precautions for Firefighters As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear. NFPA 704 Health Hazard 0 Flammability 0 Stability 0 Special hazard ne 6. Accidental Release Measures Personal Precautions ne required. Methods for containment Methods for cleaning up Other Information Pick up and transfer to properly labeled containers. See Section 12 for additional information. 7. Handling and Storage Advice on safe handling Technical measures/storage conditions Hygiene measures Handle in accordance with good industrial hygiene and safety practice Keep tightly closed in a dry and cool place ne under normal use condtions 8. Exposure Controls/Personal Protection Exposure guidelines Other Information Biological standards hazardous exposure expected under normal use conditions. information available Occupational Exposure Controls Engineering measures ne under normal use conditions.

4 SDS # : S-9504 Page 4 / 6 Personal Protective Equipment Consumer use Respiratory protection Eye/Face protection Skin and body protection Hand protection These recommendations apply to the product as supplied special protective equipment required special protective equipment required. special protective equipment required special protective equipment required 9. Physical and Chemical Properties Appearance Wax like Odor threshold information available ph Flash point > 221 C / > 429 F Boiling point/range Autoignition temperature Odor Physical state Color Method Softening point Faint Solid Black, Magenta, Cyan, Yellow Pensky-Martens closed tester Flammability Limits in Air Vapor pressure Vapor density Water solubility Insoluble Viscosity Partition coefficient Evaporation rate Melting point/range ~ 100 C / ~ 212 F Freezing point Specific gravity ~ 25 C 10. Stability and Reactivity Reactivity Stability Incompatible products dangerous reaction known under conditions of normal use Stable under normal conditions ne known Conditions to Avoid Temperatures above 200 C Hazardous Decomposition Products May emit toxic fumes under fire conditions Hazardous polymerization Hazardous reactions Hazardous polymerization does not occur ne under normal processing

5 SDS # : S-9504 Page 5 / Toxicological Information Acute toxicity Product information LD50 Oral: > 5 g/kg (rat) Component information Chronic toxicity Carcinogenicity Components not listed by IARC, NTP or OSHA Other toxic effects Product information Sensitization t expected to be a sensitizer Mutagenic effects t expected to be mutagenic Target organ effects information available Aspiration Hazard Other adverse effects ne known 12. Ecological Information Ecotoxicity The environmental impact of this product has not been fully investigated 13. Disposal Considerations Waste Disposal Methods This material, as supplied, is not a hazardous waste according to Federal regulations (40 CFR 261) Waste must be disposed of in accordance with federal, state and local environmental control regulations. Contaminated packaging Dispose of in accordance with local regulations. 14. Transport Information te This material is not subject to regulation as a hazardous material for shipping. 15. Regulatory Information International Inventories TSCA Canada CEPA Complies Complies U.S. Federal Regulations SARA 313 Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 (SARA). This product does not contain any chemicals which are subject to the reporting requirements of the Act and Title 40 of the Code of Federal Regulations, Part 372. SARA 311/312 Hazard Categories Acute Health Hazard Chronic Health Hazard

6 SDS # : S-9504 Page 6 / 6 Fire Hazard Sudden Release of Pressure Hazard Reactive Hazard Clean Water Act This product does not contain any substances regulated as pollutants pursuant to the Clean Water Act (40 CFR and 40 CFR ). Clean Air Act The Clean Air Act may apply to the substances contained in this product as follows: CERCLA This material, as supplied, does not contain any substances regulated as hazardous substances under the Comprehensive Environmental Response Compensation and Liability Act (CERCLA) (40 CFR 302) or the Superfund Amendments and Reauthorization Act (SARA) (40 CFR 355). There may be specific reporting requirements at the local, regional, or state level pertaining to releases of this material. TSCA TSCA 12b does not apply to this product. U.S. State Regulations California Proposition 65 This product does not contain any Proposition 65 chemicals. U.S. State Right-to-Know Regulations Canada This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations (CPR) and the MSDS contains all the information required by the CPR. WHMIS Hazard Class t determined 16. Other Information Issuing Date Revision Date Revision te Initial Release Disclaimer The information provided on this MSDS is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guide for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered as a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other material or in any process, unless specified in the text end