Tilt-Wash Insert Windows (2011 to Present)

Transcription

1 Tilt-Wash Insert Windows (2011 to Present) Parts Catalog Main Menu Section TOC Search What s in This Section Tilt-Wash Insert Windows Page 3 Parts Illustration Unit Sizes Custom Window Sizes Tilt Wash Insert Product Label Complete Insert Windows Complete Insert Windows Sash Sash - Upper or Lower Weatherstrip Sash Hardware / Lock & Keeper Sash Hardware / Double Hung Lifts Sash Balancers Sash Balancers Balancer Parts Glass Glass - Picture and Transom Units Insect Screens Insect Screen - Full Insect Screen - Half Insect Screen Parts Grilles Interior Grilles Frames Frame Assembly Jamb Liners Stops Filler Frame Parts Joining Components Narrow Joining Parts Installation Materials Installation Materials Service Replacement Page 31 Service Replacement Only Tilt-Wash Insert Windows (2011 to Present) - 1

2 W I N D O W S Complete Frame Glazing Bead Jamb Liners Exterior Grilles - HDN

3 Tilt-Wash Insert Windows (2011 to Present) Tilt-Wash Insert Windows Parts Illustration Parts Illustration Manufactured 2011 to Present Tilt-Wash Picture & Transom Insert Window Unit Parts 10/19/12 Tilt-Wash Insert Windows (2011 to Present) - 3

4 W I N D O W S Unit Sizes Unit Size Chart Tilt-Wash Picture & Transom Insert Window Unit Sizes 4 - Tilt-Wash Insert Windows (2011 to Present)

5 Tilt-Wash Insert Windows (2011 to Present) Tilt-Wash Insert Windows Unit Sizes Custom Window Sizes Tilt Wash Insert Windows are available in custom sizes in 1/8 increments between the smallest and the largest standard sizes. Most replacement parts for custom-sized windows are made to order and can be ordered with the Product ID found on the identification label and a description of the part needed. See Service Guide Tilt Wash Insert Product Label Every Tilt Wash Insert Window will have an identification label or glass etching containing a unique Product ID. The label on a double-hung insert is located in the upper left corner of the upper sash head jamb track. The label on a picture or transom unit is located under the side stop in the lower right-hand corner or etched into the glass. See Service Guide The Product ID may be up to 14 digits long (excluding hyphens), depending on the age of the unit. Replacement parts will also get their own unique Product ID. When ordering replacement parts, providing the Product ID ensures that replacement parts match the specifications. Tilt-Wash Insert Windows (2011 to Present) - 5

6 W I N D O W S Complete Insert Windows Complete Insert Windows Complete Insert Window All Tilt-Wash insert windows are made to order. Perma-Shield Narroline and Primed Narroline windows onestep and two-step sills are at a 14 angle. Exterior color options: White, Terratone, Sandtone, Forest Green, Canvas, Dark Bronze, Black Interior finish options: Pine or Prefinished White Glass options: High-Performance Low-E4 High-Performance Low-E4 SmartSun High-Performance Low-E4 Sun High Performance Low-E4 Tempered High-Performance Low-E4 SmartSun Tempered High-Performance Low-E4 Sun Tempered. Other glass options are available. Contact your Andersen supplier. Factory applied grille options: Finelight grilles-between-the-glass High-definition grilles - Full divided light with spacer Simulated divided light without spacer Exterior grilles To order, state: 1. Description of Part (Complete Insert) 4. Options Desired 6 - Tilt-Wash Insert Windows (2011 to Present) 7/18/11

7 Tilt-Wash Insert Windows (2011 to Present) Tilt-Wash Insert Windows Sash Sash - Upper or Lower Sash - Upper or Lower See Product Details. See Service Guide Upper Sash Lower Sash Replacement sash is made to order. Sash does not include hardware. Exterior color options: White Terratone Sandtone Forest Green Canvas Dark Bronze Black Interior finish options: Pine Prefinished White Glass options (See Logo example): Glass Logo High-Performance Low-E4 High Performance Low-E4 Tempered High-Performance Low-E4 Smart- Sun High-Performance Low-E4 Smart- Sun Tempered High-Performance Low-E4 Sun High- Performance Low-E4 Sun Tempered Glass pane thickness: Glass Date: Pane Thickness: Present Tempered Logo Factory applied grille options: Finelight grilles-between-the-glass High-definition grilles - Full divided light with spacer Simulated divided light without spacer Exterior grilles To order, state: 1. Description of Part (upper or lower sash) 4. Glass Pane Thickness (If not available from ID) 5. Options Desired (if different than original product) 9/04/15 Tilt-Wash Insert Windows (2011 to Present) - 7

8 W I N D O W S Sash Weatherstrip See Weatherstrip Replacement Video. Weatherstrip - Top and Bottom Rail 1 2 Cut to size if necessary. Finish Grey White By description 3 8 Weatherstrip - Upper Check Rail Cut to size if necessary Weatherstrip - Side/Stile Cut to size if necessary. Length Weatherstrip - Check Rail Dust Pad Cut to size if necessary Tilt-Wash Insert Windows (2011 to Present)

9 Tilt-Wash Insert Windows (2011 to Present) Tilt-Wash Insert Windows Sash Sash Hardware / Lock & Keeper See Replacement Video. Lock Kit - Flush Mount / Composite Kit includes: Lock, keeper and screws. Used as standard through Finish Stone White Lock Kit - Flush Mount / Estate Kit Includes: Instruction sheet, screw package, lock and keeper. See page 10 for individual screws. Distressed Nickel uses Satin Nickel finish, Distressed Bronze uses Black finish. Can be used as an upgrade to standard hardware. Finish Antique Brass Bright Brass Chrome Brushed Chrome Satin Nickel Oil Rubbed Bronze Distressed Bronze Distressed Nickel /15/13 Tilt-Wash Insert Windows (2011 to Present) - 9

10 W I N D O W S Sash Lock Kit - Traditional Kit includes: Lock, keeper and screws. Used as standard from 2013 to present. Can be used as an upgrade on sash with flush mount hardware. Finish Stone White Black Gold Dust Sash Keeper Spacer Finish Stone White Shim Kit - Traditional Kit includes: Lock shim and keeper shim. Finish Stone White Black Gold Dust Screw - Lock and Keeper Description Color 6-10 x 3/4 PLS Z PH SP oval STL ZD Stone White See page 9 for lock and keepers. Gold Dust Black Bright Brass Satin Nickel Oil-Rubbed Bronze Antique Brass Brushed Chrome Polished Chrome Tilt-Wash Insert Windows (2011 to Present) 10/24/14

11 Tilt-Wash Insert Windows (2011 to Present) Tilt-Wash Insert Windows Sash Sash Hardware / Double Hung Lifts See Accessory Guide See Installation Video. Bar lift and hand lift quantity of one, finger lift quantity of two. Classic Series Sash Lifts with Screws Sash Lift Hand Lift Finger Lift (Pair) Color Stone White Traditional Sash Lifts with Screws Bar Lift Hand Lift Finger Lift (Pair) Color White Stone Gold Dust Black Bright Brass Satin Nickel Oil-Rubbed Bronze Antique Brass Brushed Chrome Polished Chrome Distressed Bronze Distressed Nickel Tilt-Wash Insert Windows (2011 to Present) - 11

12 W I N D O W S Sash Estate Sash Lift with Screws Hand Lift Finger Lift (Pair) Color Antique Brass Bright Brass Chrome Brushed Chrome Satin Nickel Oil Rubbed Bronze Distressed Bronze Distressed Nickel Opening Control Device Kit Control Device Boot Bumpers Kit includes: Two opening control devices, two boots, screws, bumpers and Accessory Guide Finish Stone White Pivot - Sash Screw - Sash Pivot Description 6-10V 3/4 PLS Z PH S oval 410 SS brite wax Tilt-Wash Insert Windows (2011 to Present) 2/15/13

13 Tilt-Wash Insert Windows (2011 to Present) Tilt-Wash Insert Windows Sash Balancers Sash Balancers Sash Balancers The balancer number is imprinted onto the side of each balancer. The first two characters are the case length, and the last character is the load rating code letter. Refer to the charts below to find the proper order number. Balance Number Tilt-Wash Insert Sash Balancer Sash Balancers Balancer No. Balancer No. Balancer No. Balancer No. 14A C E G B D F H C E G I D F H A E G I B F H A C G I B D H A C E I B D F A C E G B D F H C E G I D F H A E G I B F H A C G I B D H A C E I B D F A C E G B D F H Tilt-Wash Insert Windows (2011 to Present) - 13

14 W I N D O W S Sash Balancers Sash Balancers continued Balancer No. Balancer No. Balancer No. Balancer No. 30I E A F A F B G B G C H C H D I D I E A E A F B F B G C G C H D H D I E I E A F A F B G B G C H C H D I D I E Balancer Parts Balancer Clip Cover - Balancer Tilt-Wash Insert Windows (2011 to Present)

15 Tilt-Wash Insert Windows (2011 to Present) Tilt-Wash Insert Windows Glass Glass - Picture and Transom Units Glass - Picture and Transom Units Glass Logo Glass options (See Logo example): High-Performance Low-E4 High Performance Low-E4 Tempered High-Performance Low-E4 Smart- Sun High-Performance Low-E4 Smart- Sun Tempered High-Performance Low-E4 Sun High- Performance Low-E4 Sun Tempered Tempered Logo Glass pane thickness: Glass Date: Pane Thickness: Present Factory applied grille options: Finelight grilles-between-the-glass High-definition grilles - Full divided light with spacer Simulated divided light without spacer Exterior grilles To order, state: 1. Description of Part (Picture or Transom window glass) 4. Glass Pane Thickness (If not available from ID) 5. Options Desired (if different than original product) Tilt-Wash Insert Windows (2011 to Present) - 15

16 W I N D O W S Insect Screens Insect Screen - Full Dim A Dim B 32 Dim C DIM A = W DIM B = F DIM C = F - MR F = FRAME HEIGHT W = UNIT WIDTH MR = MEETING RAIL Tilt-Wash Insert Window Full Insect Screen Insect Screen - Full / TruScene Full window insect screens with TruScene screens are made to order. Second set of latches required only when screen height is greater than ", unless center bar location dimension is less than ". To order, state: 1. Description of Part (full insect screen with TruScene screen) Insect Screen - Full / Standard Full window insect screens with standard screens are made to order. Second set of latches required only when screen height is greater than ", unless center bar location dimension is less than ". To order, state: 1. Description of Part (full insect screen with standard screen) 16 - Tilt-Wash Insert Windows (2011 to Present) 12/09/16

17 Tilt-Wash Insert Windows (2011 to Present) Tilt-Wash Insert Windows Insect Screens Tilt-Wash Insert Windows (2011 to Present) - 17

18 W I N D O W S Insect Screens Insect Screen - Half See Accessory Guide Variant number label Tilt-Wash Insert Window Half Insect Screen Insect Screen - Half / TruScene TruScene half insect screen replacements are made to order. To order, state: 1. Description of Part (TruScene half screen) Insect Screen - Half / Standard Standard half insect screen replacements are made to order. To order, state: 1. Description of Part (Standard half screen) 18 - Tilt-Wash Insert Windows (2011 to Present) 12/09/16

19 Tilt-Wash Insert Windows (2011 to Present) Tilt-Wash Insert Windows Insect Screen Parts Screen Lock with Housing (Pair) Bug Seal Color White Terratone Sandtone Forest Green Length Screen Clip - Top Rail Ref. No. 1 page 16 Use with full screen Tilt-Wash Insert Windows (2011 to Present) - 19

20 W I N D O W S Grilles Interior Grilles Interior Grilles - Removable Removable interior grilles are made to order. To order, state: 1. Description of Part (removable interior grilles) 400 Series Tilt-wash Insert grilles are not interchangeable with 400 Series Tilt-wash Full-Frame grilles. Interior/Exterior Grilles - High-Definition Replacement Finelight grilles, high-definition interior and exterior grilles are available as part of a replacement sash only. To order, see upper and lower sash, page 7. Fastener - Grille Plunger Tilt-Wash Insert Windows (2011 to Present) 7/27/12

21 Tilt-Wash Insert Windows (2011 to Present) Tilt-Wash Insert Windows Frames Frames Frame Assembly See Product Details. Inside Head Stop Head Jamb Liner Upper Sash Lock Inside Side Stop Lower Sash Keeper Lower Sash Upper Sash Balance Cover Inside Sill Stop Tilt-Wash Frame Assembly Tilt-Wash Insert Windows (2011 to Present) - 21

22 W I N D O W S Frames Jamb Liners Jamb Liner - Side Side jamb liners are made to order. Kit includes: Side jamb liner, balance covers (2), chimney plug, end plugs (3), support covers (2), wash assist stop, checkrail weatherstrip pad Left-Hand To order, state: 1. Description of Part (side jamb liner, RH or LH) 3. Color (gray or white) 4. Product ID (from product label, see page 5) 22 - Tilt-Wash Insert Windows (2011 to Present) 2/15/13

23 Tilt-Wash Insert Windows (2011 to Present) Tilt-Wash Insert Windows Frames Stops Stop - Tilt Wash Insert Units / Head Stop - Tilt Wash Insert Units / Side To order, state: 1. Description of Part (head stop) To order state: 1. Description of Part (side stop, RH or LH) Stop - Picture and Transom Units / Head Stop - Picture and Transom Units / Side To order state: 1. Description of Part (head stop) Stop - Picture and Transom Units / Sill To order state: 1. Description of Part (side stop, RH or LH) To order state: 1. Description of Part (sill stop) Stop - Tilt Wash Insert Units / Sill / 0 Degree To order state: 1. Description of Part ((sill stop, 0 degree) Stop - Tilt Wash Insert Units / Sill / 8 Degree To order state: 1. Description of Part ((sill stop, 8 degree) 8/16/13 Tilt-Wash Insert Windows (2011 to Present) - 23

24 W I N D O W S Frames Stop - Tilt Wash Insert Units / Sill / 14 Degree To order state: 1. Description of Part (sill stop, 14 degree) Glass Stop - Picture and Transom Units / Head To order state: 1. Description of Part (glass stop head) Glass Stop - Picture and Transom Units / Side Glass Stop - Picture and Transom Units / Sill To order state: 1. Description of Part (glass side stop, RH or LH) To order state: 1. Description of Part (glass sill stop) Filler Filler - Picture and Transom Units Dimension Finish 75'' Pine Oak Maple White Tilt-Wash Insert Windows (2011 to Present)

25 Tilt-Wash Insert Windows (2011 to Present) Tilt-Wash Insert Windows Frames Frame Parts Wash Assist Stop Weatherstrip - Check Rail Liner Cover / Side Jamb Liner Replacement balancer covers to be cut in the field from lineal length sent. Length Color 44 1/16 White Gray Support Cover / Side Jamb Liner Length Color 4 5/8 White Gray End Plug - Head End Plug - Sill Left Right Sill Plug Chimney Plug /13/12 Tilt-Wash Insert Windows (2011 to Present) - 25

26 W I N D O W S Balancer Clip Glass Clip (Klick Fastener) - Picture and Transom Units Wash Assist Exterior Trim Stop Cover Exterior stop cover snaps into outside frame member creating a finished look between the insert window and the existing exterior window trim. Available as single pieces or a package of 20. Cut trim stop cover to desired width. Package of Length Finish Single Piece 20 White Terratone Sandtone ft Forest Green Canvas Dark Bronze Black Tilt-Wash Insert Windows (2011 to Present) 7/27/12

27 Tilt-Wash Insert Windows (2011 to Present) Tilt-Wash Insert Windows Joining Components Narrow Joining Parts Trim Strip - Exterior Mull Color 4 ft 7 ft 12 ft White Terratone Sandtone Forest Green Canvas Dark Bronze Black Inside Casing - Interior Mull ft 8 ft Finish Single Piece Package of 20 Single Piece Package of 20 Pine Maple Oak Prefinished White Joining Hardware Kit Kit includes: 2 joining brackets, 22 joining screws, and a joining installation guide Joining Brackets (Pair) Brackets are included in joining hardware kit above. Joining Screw #8 x 1 1/8 Sold individually. 22 screws are required per join. Screws are included in joining hardware kit above Tilt-Wash Insert Windows (2011 to Present) - 27

28 W I N D O W S Installation Materials Installation Materials Installation Materials Installation Kit - Double-Hung Units One kit is shipped with each double-hung insert window Kit includes: Installation screws, 40 installation shims (1/16 thick, quantity 32; 1/32 thick, quantity 8), 3/8 diameter backer rod, and hole plugs Installation Kit - Picture and Transom Units One kit is shipped with each picture or transom insert window Kit includes: Installation screws, 56 installation shims (1/16 thick, quantity 40; 1/32 thick, quantity 16), 3/8 diameter backer rod Hole Plug Quantity of 6. Installation Shim Insert Installation Screw - Double-Hung Units #8 x 2 panhead Used to attach insert frame to existing opening. Color Gray White Case of /16 1/ Exterior Trim Stop Cover Exterior stop cover snaps into outside frame member creating a finished look between the insert window and the existing exterior window trim. Available as single pieces or a package of 20. Cut trim stop cover to desired width. 2 Length 12 ft Finish Single Piece Package of 20 White Terratone Sandtone Forest Green Canvas Dark Bronze Black Tilt-Wash Insert Windows (2011 to Present)

29 Tilt-Wash Insert Windows (2011 to Present) Stops - Interior The interior stop can be ripped to desired width. Rip down center of part to obtain two stops approximately 1-1/4 wide. Interior stop profile is reversible after ripping. Use the milled profile to complement Tilt-Wash insert window sash profile or use reverse side with square edge to trim interior of window. Dimensions (w x l) Finish Single Box of x 48 Pine Maple Oak Prefinished White x 84 Pine Maple Oak Prefinished White Tilt-Wash Insert Windows (2011 to Present) - 29

30 W I N D O W S Installation Materials 30 - Tilt-Wash Insert Windows (2011 to Present)

31 Tilt-Wash Insert Windows (2011 to Present) Service Replacement Service Replacement Only Service Replacement Service Replacement Only Complete Frame Complete Frame Inside stop Inside stop Side jamb Side jamb liner Side jamb Side jamb liner OFM OFM Replacement frames are made to order. Frame includes assembled wood jambs with OFM, side jamb liners, head liner, and inside stops. Balancers included if referenced in description. Frame does not include L-trim To order, state: 1. Description of part (Complete Frame with balancers or Complete Frame without balancers ) Tilt-Wash Insert Windows (2011 to Present) - 31

32 W I N D O W S Service Replacement Only Glazing Bead Glazing Bead - Standard / Upper Sash Top Rail - Upper Sash Stile - Upper Sash To order state: 1. Description of Part (glazing bead type): Top Rail - Upper Sash Stile - Upper Sash Upper Check Rail - Upper Sash Upper Check Rail - Upper Sash Glazing Bead - Standard / Lower Sash Lower Check Rail - Lower Sash Stile - Lower Sash To order state: 1. Description of Part (glazing bead type): Lower Check Rail- Lower Sash Stile - Lower Sash Bottom Rail - Lower Sash Bottom Rail - Lower Sash 32 - Tilt-Wash Insert Windows (2011 to Present)

33 Tilt-Wash Insert Windows (2011 to Present) Service Replacement Service Replacement Only Glazing Bead - High Definition / Upper Sash To order state: Top Rail - Upper Sash Stile - Upper Sash 1. Description of Part (glazing bead type): Top Rail - Upper Sash Stile - Upper Sash Upper Check Rail - Upper Sash Upper Check Rail - Upper Sash Glazing Bead - High Definition / Lower Sash To order state: Lower Check Rail - Lower Sash 1. Description of Part (glazing bead type): Lower Check Rail - Lower Sash Stile - Lower Sash Bottom rail - Lower Sash Stile - Lower Sash Bottom Rail - Lower Sash Tilt-Wash Insert Windows (2011 to Present) - 33

34 W I N D O W S Service Replacement Only Jamb Liners Jamb Liner - Head Cut to size if necessary Length Color White Gray Foam - Side Jamb Liner Order by the foot Exterior Grilles - HDN Exterior Grille - HDN / Lineal / PVC White Terratone Sandtone Length in N/A N/A N/A N/A N/A N/A 84 in N/A N/A N/A N/A N/A N/A 34 - Tilt-Wash Insert Windows (2011 to Present)