Motors Automation Energy Transmission & Distribution Coatings SAFETY ORIENTATION
|
|
|
- Sophie Benson
- 7 years ago
- Views:
Transcription
1 SAFETY ORIENTATION
2 AGENDA Welcome Commitment Employee Safety Responsibilities Reporting Accidents/Injuries Personal Protective Equipment Fire Extinguishers Emergency Evacuation/Procedure Drug and Alcohol Policy Safe Lifting Hazardous Communication Lock out Tag Out (LOTO) Blood borne Pathogens Safe Work Practices
3 COMMITMENT TO SAFETY Electric Machinery believes the most important asset to our company is our employees and their personal safety. We will provide the proper safety training, personal protective equipment, and also provide the proper support to ensure that all employees return safely to their families.
4 Employee Safety Responsibilities Employees Should: Report all accidents immediately to supervisors, regardless of extent of injury or damage. Take part in safety activities, including inspections, training sessions, accident investigations or other related actions as appropriate. Obey all safety and health standards, rules and regulations and safe work practices. Use safety equipment or safety devices provided to employees for their protection. Practice good housekeeping by keeping workplaces clean and orderly. Report any unsafe condition to supervisors which cannot immediately be corrected by employee.
5 Employee Safety Responsibilities Cont Employees Should NOT: Remove, displace, damage, destroy, tamper or disengage any safety devices, safeguards, notices or warnings. Interfere with the use of any safety equipment or safeguard by others. Hide any accident or injury
6 Reporting Accidents/Injuries Report all accidents IMMEDIATELY to a Supervisor and/or Manager. Failure to report an accident/injury is subject to disciplinary action up to termination. EM has 0 (zero) tolerance for failure to report an accident/injury. Report any unsafe acts from your co-workers immediately before it becomes an accident.
7 Personal Protective Equipment (PPE) ALL employees MUST wear the following PPE prior to entering the plant (NO EXCUSES) Safety Boots/Shoes Safety Glasses Ear Hearing Protection (Where Required)
8 Personal Protective Equipment (PPE) cont PPE is used to reduce the hazard NOT to eliminate.
9 Types of PPE
10 Personal Protective Equipment At no time should any Personal Protective Equipment be modified, altered, or disengaged; doing so will be terms for disciplinary action up to termination.
11 PPE Maintenance Make sure to maintain your PPE clean and secure When working with chemicals: gloves must be removed carefully without having skin contact to exterior of glove. Wash glasses with warm water and keep in dry place, store at room temperature. Re-usable ear plugs must be washed with warm water daily after use. Disposable ear plugs should be replaced daily.
12 Personal Hygiene/Clothing Requirements Uniforms are required for all employees working in the shop. No loose clothing or objects allow in the plant.
13 Fire Extinguishers
14 Emergency Evacuation Plan Prior to working at your station, look around and learn all the emergency exits and routes. Signs are posted throughout the facility to help guide you. If you use an extinguisher always report to your Supervisor. STAY CALM!!! Listen and obey all instructions from your Supervisor, Manager or Lead.
15 Drug and Alcohol Company Policy Electric Machinery is a Drug and Alcohol Free workplace. EM prohibits the use of any controlled substance and /or alcohol during working hours including any medication that may interfere with the employees ability to work safely, operate machinery or equipment. Illegal drug use is not allowed at all. EM reserves the right to send employees to the clinic for Drug and Alcohol testing if suspicious of use, post accident, or post incident. The employee will not be allowed to work until drug screen clearance is obtained. If an employee returns with a positive result, a return to work plan will be put in place.
16 Safe Lifting PROPER WAY TO LIFT
17 SAFE LIFTING Means using your head! Use Your Head and Save Your Back! STAND close to the load Bend your knees - not your back! Get Help with heavy or awkward loads! Let your legs do the lifting Use the right tools!
18 Safe Lifting/Carrying the Load Hold the load close so you can see over it. Keep the load balanced. Avoid twisting the body Watch out for pinch points -- doorways, etc. Face the way you will be moving.
19 Hazard Communication Program The Right To Know Chemical Hazards Describes Physical and Health Hazards Provides Training in Safe handling Container Labels Material Safety Data Sheets (MSDS)
20 Material Safety Data Sheets Identity of Material and Manufacturer Hazardous Ingredients Physical and Chemical Characteristics Fire and Explosion Hazard Data Reactivity Data Health Hazard Data (Limits, Symptoms, etc.) Precautions for Safe Handling Control Measures and First Aid
21 Hazard Communication Program continued CHEMICAL LABELS Chemical name or identity Hazard warnings Name and address of responsible party.
22 NFPA Diamond
23 Lockout/Tagout Control of Hazardous Energy Electrical Mechanical Thermal Pressure Chemical Kinetic / Gravity Prevention of injuries caused by release of Hazardous Energy. Never try to energize or start a machine that is locked out.
24 Lockout/Tagout continued Prepare for shutdown Shut down equipment Isolate equipment Apply lockout / tagout devices Control stored energy Verify isolation of equipment.
25 Removing Lockout/Tagout Authorized Employees Affected Employees Replace guards and covers Check for all clear Remove your lock and tag Other locks & tags may remain Notify responsible party of completion
26 Blood borne Pathogens Hospital / Laboratory Waste is in a Red Bag Wear protective equipment, especially gloves & safety glasses Employee should have NO contact with blood or body fluids to avoid: Aids Hepatitis (Hep-B vaccines for designated persons) Sharps disposal
27 Blood borne Pathogens Motors Automation Energy Transmission & Distribution Coatings continued BBP Precautions Assume any injured person may be infected Wear gloves, leak proof shield or appropriate PPE Avoid getting blood or body fluids on your skin, especially your nose, eyes or mouth Immediately wash with soap and water Flush eyes with running water if they are splashed Remove and bag clothes spattered with blood.
28 Good Safety Practices Inspect work area daily Be an observer - stay alert Housekeeping, Housekeeping, Housekeeping Use your best safety device - THINK If you re not sure - ASK someone!! Report Injuries/Incidents/Illnesses Report safety issues to a Supervisor/Manager/Safety
29 SAFETY RESPONSIBILITY?? All employees are responsible for Safety. We are responsible for our own safety and that of our coworkers as well. Your Managers & Supervisors do not want or ask that you put yourself in harms way. We ask that you do not. Your Safety and Health REALLY IS our first priority. REMEMBER The machines are not your friends. They have no heart and no mind. Respect them, obey the rules, and LOTO.
30 Safety Department Phil Arneson EHS Manager Tae Briski- Safety Training All Managers/Supervisors/Leads Safety Committee
OSHA Training Guidelines (An Unofficial Summary)
OSHA Training Guidelines (An Unofficial Summary) Many standards promulgated by the Occupational Safety and Health Administration (OSHA) explicitly require the employer to train employees in the safety
E3902 Seeing Accidents Before They Happen Leader s Guide
E3902 Seeing Accidents Before They Happen Leader s Guide ERI PRODUCTIONS INC. SEEING ACCIDENTS BEFORE THEY HAPPEN This easy-to-use Leader s Guide is provided to assist in conducting a successful presentation.
Leader s Guide E4017. Bloodborne Pathogens: Always Protect Yourself
E4017 Bloodborne Pathogens: Always Protect Yourself 1 Table of Contents Introduction 3 Video Overview.3 Video Outline.4 Preparing for and Conducting a Presentation. 7 Discussion Ideas..8 Quiz..9 Quiz Answers...11
Safety? We have an APP for that!
Safety? We have an APP for that! Carltech s Accident Prevention Program Employee Safety Handbook Message from our President It is my pleasure to welcome you to the Carltech team! As one of our valued employees,
Safety Resources from
Safety Resources from Sample Safety Program TABLE OF CONTENTS I. DECLARATION OF POLICY II. DUTIES AND RESPONSIBILITIES III. SAFETY COMMITTEE IV. PROGRAM REINFORCEMENT V. CORPORATE DRUG POLICY VI. HAZARD
TEMPLE UNIVERSITY ENVIRONMENTAL HEALTH AND RADIATION SAFETY
Page 1 of 7 ISSUED: 5/00 REVISED: 08/06 1. Potential Releases of Radioactive Materials to Unrestricted Areas The Environmental Health and Safety Department (EHRS) must be notified immediately if an emergency
Training on Standard Operating Procedures for Health Care Waste Management Swaziland 12 May, 2011
Training on Standard Operating Procedures for Health Care Waste Management Swaziland 12 May, 2011 Safe Infectious Waste Handling and Transport Objective Waste Overview Roles and Responsibilities of Waste
WEEKLY SAFETY MEETING All Euramax Subsidiaries LOCKOUT / TAGOUT. Safety Meeting Contents. Meeting Notice. Leaders Guide.
Safety Meeting Contents Meeting Notice Leaders Guide Employee Handout Employee Quiz Meeting Sign-In Sheet Employee Puzzle PRIOR TO THE WEEKLY MEETING: - Post the meeting notice by the timeclock - Read
Machine Guarding and Operator Safety. Leader Guide and Quiz
4646 Machine Guarding and Operator Safety Leader Guide and Quiz Leader s Guide MACHINE GUARDING & OPERATOR SAFETY INTRODUCTION: A brief description of the program and the subject that it addresses. This
OSHA Compliance Checklist ASC
OSHA Compliance Checklist ASC Date Inspectors Facility OSHA is the agency responsible for establishing and enforcing standards that will make the workplace safe and healthful for the employees. The way
Occupational Health Program Safety Training Series. Lockout/Tagout Safety Awareness Training
Occupational Health Program Safety Training Series Lockout/Tagout Safety Awareness Training 1 Lock out/tag out Lock out: the placement of a lockout device (lock) on an energy isolating device in accordance
This program is listed as a mandatory inspection item on the MnOSHA Investigation Checklist, Item 7D.
Standard: Summary: Coverage: Workplace Accident and Injury Reduction Program RESOLUTION NO# 0809-88 Minnesota Statutes 182.653, A Workplace Accident and Injury Reduction Program Minnesota Rules 5205.1500,
OSHA s Bloodborne Pathogens Standard 1910.1030
OSHA s Bloodborne Pathogens Standard 1910.1030 Jens Nissen & Kennan Arp Iowa OSHA Enforcement 515-281-3122 nissen.jens@dol.gov or arp.kennan@dol.gov Bloodborne Pathogens Standard Federal Law 29 CFR 1910.1030
Management Plan For Control of Blood-borne Pathogens, Infectious Wastes and Other Potentially Hazardous Biological Agents
Management Plan For Control of Blood-borne Pathogens, Infectious Wastes and Other Potentially Hazardous Biological Agents 1.0 Executive Summary 1.1 The Bloodborne Pathogen standard, initiated by OSHA,
Bloodborne Pathogens. Updated 1.21.13
Bloodborne Pathogens Updated 1.21.13 Purpose OSHA s Blood-borne Pathogens Standard protects anyone with a job-related risk of contracting a blood-borne borne disease The standard outlines preventative
Curtain Guards Made of PVC and designed to protect the operator from the risk of airborne chips or tool fragments.
Two General Safety Rule for CNC Machines Never operate a CNC machine without proper training or consulting the specific operator's manual for that particular machine and control type. Never attempt to
C3306 LOCKOUT/TAGOUT FOR AUTHORIZED EMPLOYEES. Leader s Guide. 2005, CLMI Training
C3306 LOCKOUT/TAGOUT FOR AUTHORIZED EMPLOYEES Leader s Guide 2005, CLMI Training LOCKOUT/TAGOUT FOR AUTHORIZED EMPLOYEES This easy-to-use Leader s Guide is provided to assist in conducting a successful
OSHA SAFETY TRAINING TABLE for more information see www.osha.gov
OSHA SAFETY TRAINING TABLE for more information see www.osha.gov CATEGORY DESCRIPTION WHO RECEIVES HOW OFTEN AWAIR Requires employers to set up a written accident & injury reduction program based on clearly
Independent Contractor Policy
Independent Contractor Policy This Policy has been implemented to prevent accidents and personal injuries. It is not intended to be entirely inclusive. It is the responsibility of the Independent Contractor
Lockout - Tagout. Control of Hazardous Energy OSHA Standard 1910.147
Lockout - Tagout Control of Hazardous Energy OSHA Standard 1910.147 You will learn Purpose of Lockout-Tagout Requirements for LOTO Types of Hazardous Energy Procedures for LOTO Types of Energy Electrical
Safety at Kaiser Permanente Los Angeles Medical Center Environmental Health & Safety Department
Safety at Kaiser Permanente Los Angeles Medical Center Environmental Health & Safety Department Environmental Health and Safety (EHS) The Los Angeles Medical Center (LAMC) is committed to providing a safe
LOCKOUT GUIDELINE. To ensure that a piece of equipment cannot be turned on, pressurized or switched on accidently while an employee is working on it.
Background LOCKOUT GUIDELINE Both Aspasa in its ISHE (Initiating Safety Health & Education) program and Sarma in its SHREQ (Safety, Health, Road Transport, Environment & Quality) program have seen that
Safety Meeting Topic: Chemical Spills and Emergency Action Plans for General Industry
Company Name: Safety Meeting ID: 16 Date: Grainger Safety Services Inc. 2012 Safety Meeting Topic: Chemical Spills and Emergency Action Plans for General Industry UPDATED: This safety meeting has been
FACILITY SAFETY SIGNAGE GUIDE: 10 SIGNS TO SPOT DURING A PLANT WALKTHROUGH
FACILITY SAFETY SIGNAGE GUIDE: 10 SIGNS TO SPOT DURING A PLANT WALKTHROUGH Safety signs are the primary way to communicate important warnings and messages to your employees, on-site contractors and other
Lockout-Tagout Training for University @ Albany Employees Control of Hazardous Energy OSHA standard 1910.147
Lockout-Tagout Training for University @ Albany Employees Control of Hazardous Energy OSHA standard 1910.147 University @ Albany SUNY Office of Environmental Health & Safety 518/442-3495 October 2010 Primary
EMERGENCIES. Emergencies
Emergencies A good safety program, training, and use of precautions reduce the number and seriousness of accidents. Laboratory accidents can range from fires to chemical spills to spills and falls. Your
Employee Safety and Health Training Plan
Employee Safety and Health Training Plan Environmental Health, Safety, and Risk Management Department Box 6113, SFA Station Nacogdoches, Texas 75962-6113 Revised: January 2011 Purpose and Scope This plan
Safety introduction. In the event of fire and accidents, you have a responsibility to know the location of:
Safety introduction 2011-12-01 1 (7) Safety introduction General safety at the department A laboratory is a place with a lot of potential risks such as dangerous substances, sharp objects and electrical
Lockout / Tagout Program
Lockout / Tagout Program Table of Contents Page Scope... 2 Definitions... 2 Authorization... 3 Responsibilities... 4 Compliance and Enforcement... 4 When to Lockout/Tagout (LOTO)... 5 Lockout Procedure...
TEMPORARY EMPLOYEES SAFETY PROCEDURES
TEMPORARY EMPLOYEES SAFETY PROCEDURES Temporary Agencies will ensure that any temporary employee sent to work at Modern will have received and understand the General Safety Rules. GENERAL SAFETY RULES
JAC-CEN-DEL COMMUNITY SCHOOLS BLOODBORNE PATHOGENS UNIVERSAL PRECAUTIONS A BACK TO SCHOOL TRADITION
JAC-CEN-DEL COMMUNITY SCHOOLS BLOODBORNE PATHOGENS UNIVERSAL PRECAUTIONS A BACK TO SCHOOL TRADITION UNIVERSAL PRECAUTIONS AGAINST BLOODBORNE PATHOGENS Employees working in a school system are potentially
PERSONNEL WORK PLACE SAFETY PROGRAM
5440 PERSONNEL WORK PLACE SAFETY PROGRAM Accidents are undesirable, unplanned occurrences which can be prevented and which often result in bodily harm, loss of school time, property damage, expensive legal
GEORGIA INSTITUTE OF TECHNOLOGY ENVIRONMENTAL HEALTH AND SAFETY PERSONAL PROTECTIVE EQUIPMENT
PURPOSE To protect the health and welfare of GEORGIA TECH employees in areas where there may be a risk of injury or exposure to hazardous substances or conditions employees who work in areas where physical
Presented by: Rich Perry Marsh Risk Consulting
Flammable and Combustible Liquids Presented by: Rich Perry Marsh Risk Consulting What s the Big Deal? Flammable and combustible liquids are easily ignited Ignite with explosive force Burn readily and give
Lockout Tagout Program. Table of Contents
Environmental Health and Safety Name: Lockout Tagout Program Date Created: 2/1/2014 Date Revised: 11/17/2014 Created By: Jill Jones Table of Contents Purpose and Regulatory Standards... 1 Scope... 1 Employer
Page85. Lock-out Tag-out Plan
Page85 Lock-out Tag-out Plan Page86 Lock-out / Tag-Out Plan Table of Contents 1. Policy 2. Purpose 3. Scope 4. General Procedures 5. Application of Control Procedure 6. Release from Control Procedure 7.
Mock OSHA Inspection:
Mock OSHA Inspection: PASS or FAIL? Infection Control OSHA Dental Practice Act HIPAA Presented by Leslie Canham, CDA, RDA, CSP (Certified Speaking Professional) In the dental field since 1972, Leslie helps
EXPOSURE CONTROL PLAN (sample) 1 Child Care Directors and Employers
EXPOSURE CONTROL PLAN (sample) 1 Child Care Directors and Employers The Model Exposure Control Plan is intended to serve as an employer guide to the OSHA Bloodborne Pathogens standard. A central component
FLORENCE TOWNSHIP BOARD OF EDUCATION FILE CODE: 4112.4/4212.4 Florence, New Jersey
FLORENCE TOWNSHIP BOARD OF EDUCATION FILE CODE: 4112.4/4212.4 Florence, New Jersey Regulation Exposure Control Administration BLOODBORNE PATHOGENS A. The district safety and health program officer, district
Safety Training Needs Assessment
Safety Needs Assessment Form Instructions: Please review each question and either check YES or NO. If a question is checked YES you will be required to complete the training topic before initial assignment
HAZARD IDENTIFICATION AND RISK ASSESSMENT PROCEDURES FOR DEEP SOUTH CRANE & RIGGING
HAZARD IDENTIFICATION AND RISK ASSESSMENT PROCEDURES FOR DEEP SOUTH CRANE & RIGGING PURPOSE Due to the risks inherent in lifting and transporting large, heavy, and/or cumbersome objects, it is critically
PITTSBURG TANK AND TOWER CO., INC.
PITTSBURG TANK AND TOWER CO., INC. HEALTH, SAFETY & ENVIROMENTAL PROGRAM INDEX 1.SAFETY POLICY & MANAGEMENT RESPONSIBILITIES - Safety Policy - Administrative Duties * Top Management * Safety Director *
HAZARD COMMUNICATION & THE GLOBAL HARMONIZING SYSTEM EMPLOYEE TRAINING
HAZARD COMMUNICATION & THE GLOBAL HARMONIZING SYSTEM EMPLOYEE TRAINING This easy-to-use Leader s Guide is provided to assist in conducting a successful presentation. Featured are: INTRODUCTION: A brief
Accident, Injury & Illness Program Training
CITY OF PHILADELPHIA RISK MANAGEMENT DIVISION Safety Directive #A-8 Revision #1 Title: Accident, Injury & Illness Program Training Purpose Training is one of the most important elements of any safety &
Conducting a Job Hazard Assessment. Environmental, Health and Safety 275-3241
Conducting a Job Hazard Assessment Environmental, Health and Safety 275-3241 EH&S Programs: Fire Safety Blood Borne Pathogens Hazard Communication Personal Protective Equipment Emergency Preparedness General
1) Giving patient access and control over their health information
he HIPAA Challenge: How to protect patient privacy while providing necessary information to individuals and entities involved in the patient s care that need patient information to perform necessary services.
Student Shop Safety Policy GS92 Page 1
Policy Subject: Student Shop Safety Effective: 8/1/2012 Affected Area: Machine Shops on Campus Reviewed/Revised: 8/1/2012 1.0 Purpose, Applicability, and Scope 1.1 Purpose- This policy identifies the requirements
LOCK-OUT / TAG-OUT SAFETY TRAINING
LOCK-OUT / TAG-OUT SAFETY TRAINING Introduction Welcome to Lock-out Tag-out Training "So I m on the job one day, doing some repair on a cutting machine.replacing a guide on the table. Pretty routine everything
How to Meet OSHA s Employee Training Requirements
How to Meet OSHA s Employee Training Requirements A Quick Guide for Medical, Dental, and Other Ambulatory Care Settings A supplement to Medical Environment Update Dear reader, Survey responses and calls
Use and Disposal of Sharps
From Infection Prevention: A Reference Booklet for Health Care Providers 2001 EngenderHealth Use and Disposal of Sharps In health care settings, injuries from needles and other sharp items are the number-one
PALM BEACH STATE COLLEGE PERSONAL PROTECTIVE EQUIPMENT (PPE) JOB HAZARD ASSESSMENT
PALM BEACH STATE COLLEGE PERSONAL PROTECTIVE EQUIPMENT (PPE) JOB HAZARD ASSESSMENT Department: Facilities Campus: All Task: Check/Service/Maintain/Repair/Install HVAC Equipment and Systems Job Title(s)
Business & Legal Reports (BLR) Training. Workplace Safety Online Courses. Accident Investigations. Aerial Lift Safety
Business & Legal Reports (BLR) Training Workplace Safety Online Courses COURSE TITLE Accident Investigations Aerial Lift Safety Americans with Disabilities Act - What Supervisors Need to Know Arc Flash
Standard Operating Procedure for a Chemical Spill
Standard Operating Procedure for a Chemical Spill Facility: Lab Director: Scope: ERC Clean Room C17 Engineering Research Complex Electrical and Computer Engineering Brian Wright 3234 Engineering 355-5233
ALVERNIA UNIVERSITY OSHA REGULATION: 29 CFR 1910.147 THE CONTROL OF HAZARDOUS ENERGY (LOCKOUT / TAGOUT) SECTION: 2400
OSHA REGULATION: 29 CFR 90.7 THE CONTROL OF HAZARDOUS ENERGY (LOCKOUT / TAGOUT) DATE: 0/5/2008 DATE: /2/202 A. POLICY. This procedure follows requirements set forth in 29 CFR 90.7. 2. It is the policy
Temporary Worker Safety Checklist
Temporary Worker Safety Checklist The following checklists provide guidance for staffing agencies and employers that hire temporary workers regarding the steps each party should take to ensure it is meeting
Living Arts Institute @ School of Communication Arts Emergency Preparedness Plan. - Table of Contents -
Living Arts Institute @ School of Communication Arts Emergency Preparedness Plan - Table of Contents - Purpose 1 Evacuation Procedures 2 Medical Emergency 3 Accident Report Form 4 Blood and Body Fluid
This guide is prepared by the Occupational Safety and Health Branch, Labour Department. This edition March 2010
This guide is prepared by the Occupational Safety and Health Branch, Labour Department This edition March 2010 This guide is issued free of charge and can be obtained from offices of the Occupational Safety
Bloodborne Pathogens Program Revised July, 5 2012
Bloodborne Pathogens Program Revised July, 5 2012 Page 1 of 16 Table of Contents 1.0 INTRODUCTION...3 1.1 Purpose...3 1.2 Policy.3 2.0 EXPOSURE CONTROL METHODS 4 2.1 Universal Precautions.4 2.2 Engineering
Master Workplace Inspection Checklist for General Shop Safety. MASTER WORKPLACE INSPECTION CHECKLIST General Shop Safety
Integrated Risk Management Master Workplace Inspection Checklist for General Shop Safety Document Type: Form Control Number: UIRM- FM_012_50 File Code: UIRM-001 Last Reviewed: March 2014 Department/Unit:
Elevating Devices Mechanic Safety Training
Elevating Devices Mechanic Page 1 PREFACE This Elevating Devices Mechanic Curriculum Training Standard has been developed in keeping with the Common Format Guidelines prescribed by the Technical Standards
Control of Hazardous Energy LOCKOUT/TAGOUT 29 CFR 1910.147
Control of Hazardous Energy LOCKOUT/TAGOUT 29 CFR 1910.147 Contents I. Introduction II. Scope and Application III. Definitions IV. Lockout/Tagout Manual V. Energy Control Procedures 1. Applying Energy
OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION (OSHA)
OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION (OSHA) The OSHA/VOSH 1910.1030 Blood borne Pathogens Standard was issued to reduce the occupational transmission of infections caused by microorganisms sometimes
Safe Operating Procedure
Safe Operating Procedure (Revised 11/11) JOB SAFETY ASSESSMENTS (For assistance, please contact EHS at (402) 472-4925, or visit our web site at http://ehs.unl.edu.) This SOP is intended for supervisors
Safety Inspection Checklist
Inspector(s): Building: Room Number (s): Department/Unit: Date Inspected: Supervisor: To customize your local inspection checklist, delete or add as required. Inspection Headings: 1. Administrative 8.
Safety and Health Office WORKPLACE SAFETY CHECKLIST
Location: Date: Inspected by: Safety and Health Office WORKPLACE SAFETY CHECKLIST WORK ENVIRONMENT Ventilation Removal of fumes and dust Temperature and humidity control Noise levels Vibration Lighting
BLOODBORNE PATHOGENS EXPOSURE CONTROL PROGRAM
BLOODBORNE PATHOGENS EXPOSURE CONTROL PROGRAM Purpose: The purpose of this program is to eliminate or minimize employee and student exposure to blood and other potentially infectious materials. This exposure
Standard Operating Procedure for Blood Borne Infectious Disease Control Measures at Calvin College
Standard Operating Procedure for Blood Borne Infectious Disease Control Measures at Calvin College Clean up should be done by non-student employees and trained personnel only Cleaning Up BODY FLUIDS from
DO YOU WORK AROUND BLOOD OR BODY FLUIDS? Cal/OSHA s New Rules
DO YOU WORK AROUND BLOOD OR BODY FLUIDS? Cal/OSHA s New Rules Labor Occupational Health Program University of California, Berkeley 1994 ACKNOWLEDGMENTS This booklet is a publication of the Labor Occupational
HEALTH AND SAFETY REDUCING ACCIDENTS IN KITCHENS
HEALTH AND SAFETY REDUCING ACCIDENTS IN KITCHENS HEALTH & SAFETY UNIT SPRING 2006 CONTENTS 1. WHAT CAUSES ACCIDENTS?...2 2. WHO GETS INJURED?...2 3. SLIPS...2 4. TRIPS...3 5. SCALDS AND BURNS...3 6. MACHINERY
SECTION 1 - PRODUCT IDENTIFICATION
Product Identification Physical Data Hazardous Components Fire and Explosion Hazard Data Reactivity Data Health Hazard Information Spill or Leak Procedures Handling Information Special Protection Information
Occupational Health and Safety in the Laboratory (Undergraduate Students)
Occupational Health and Safety in the Laboratory (Undergraduate Students) Introduction and scope of the Guidelines These guidelines have been written for all laboratory practical classes at the University
Appendix J IBC Biohazard Spill Management Plan
OVERVIEW Prevention is the most important part of any spill management plan. Be sure to read and understand standard operating procedures (SOP s) and protocols for safe manipulation of biohazards before
Union College Campus Safety Emergency Action Guide
Union College Campus Safety Emergency Action Guide Emergency Telephone Numbers At Union College, for all campus emergencies dial Campus Safety at ext. 911. (If the line is busy on a second try, dial "6911".)
PENNY IN A CUP: DEMONSTRATING THE LAW OF INERTIA
PENNY IN A CUP: DEMONSTRATING THE LAW OF INERTIA Introduction Newton s (Sir Isaac Newton, English physicist, 1642 1727) First Law of Motion states that: An object at rest tends to stay at rest, and an
KEY CAL/OSHA STANDARDS THAT APPLY TO MOST EMPLOYERS
KEY CAL/OSHA STANDARDS THAT APPLY TO MOST EMPLOYERS FACTSHEET 1 Below are some key Cal/OSHA standards that apply to most employers: A. INJURY AND ILLNESS PREVENTION PROGRAM STANDARD (Title 8 California
WHS Induction Series. 36 Toolbox Talks. Contents
36 Toolbox Talks 3-5 minute toolbox talks for induction or refresher safety training. Having regular training programs that educate your workers about workplace issues has never been easier than now with
WORKING IN CONFINED SPACES GUIDELINES
WORKING IN CONFINED SPACES GUIDELINES Contents 1 Introduction... 2 2 Scope... 2 3 Definitions... 2 4 Responsibilities... 3 4.1 Permit Authoriser... 3 4.2 Permit Receiver... 3 4.3 Responsible UOW Officer...
WEEKLY SAFETY MEETING All Euramax Subsidiaries MATERIAL SAFETY DATA SHEETS (MSDS) Safety Meeting Contents. Meeting Notice.
Safety Meeting Contents Meeting Notice Leaders Guide Employee Handout Employee Quiz Meeting Sign-In Sheet Employee Puzzle PRIOR TO THE WEEKLY MEETING: - Post the meeting notice by the timeclock - Read
Life Saving Rules SAFETY BY CHOICE, NOT BY CHANCE
Life Saving Rules SAFETY BY CHOICE, NOT BY CHANCE Foreword from Kevin Reinhart The 12 Life Saving Rules are a part of Nexen s continued commitment to create a safe work environment for our employees. The
Pesticide Spills. Chapter 26. In This Chapter. Keywords. Accidents. Pesticides Act and Environmental Protection Act
Chapter 26 Pesticide Spills In This Chapter Keywords Accidents After learning the information in this chapter, you will be able to: 1. Define a spill. 2. Describe when a spill must be reported to the Spills
Corporate Safety Infection Prevention Employee Health
Corporate Safety Infection Prevention Employee Health This self-directed learning module contains information you are expected to know to protect yourself, our patients, and our guests. Target Audience:
Electrical Safety in the Workplace
Electrical Safety in the Workplace NFPA 70 E Presented by Sabine Mueller What Made Sabine Choose Such a DRY Topic? Ulterior Motive Metso Mueller Engineering has been visiting many scrap yards two or more
Washington University Environmental Health and Safety Clinical Inspection Comment Sheet
Washington University Environmental Health and Safety Clinical Inspection Comment Sheet Signs and Labels: Appropriate hazard warnings including any words, pictures, symbols or combination that convey health
Hazard/Risk Identification and Control Procedure
Hazard/Risk Identification and Control Procedure Introduction Hazard identification and the steps taken to minimize the risks associated with identified hazards are a critical component of working safely.
Brock University Facilities Management Operating Procedures
Subject: Bodily Fluid Clean-Up Number: FMOP 2-3 Approval: Executive Director Issue Date: 22 Sep 08 Responsibility: Manager Custodial Services Review Period: 2 Years PROCEDURES FOR BODILY FLUID CLEAN-UP
Tech Shop Safety Level 2 - FN000425. Tech Shop / Tool Safety Operations. (Fermilab machines not covered in course FN000258)
Tech Shop Safety Level 2 - FN000425 Tech Shop / Tool Safety Operations (Fermilab machines not covered in course FN000258) Table of Contents Tech Shop / Tool Safety Operations 3 General Rules of Safety
You ve. life. ahead. you... So, safe. the of. job!
You ve So, got your play whole it safe life on ahead the of job! you... So, play it safe on the job! Getting a job anytime soon? Money isn t the only thing to think about. If you re under 18 and thinking
Methodist Le Bonheur Healthcare. Extern Orientation. Posttest Packet
Methodist Le Bonheur Healthcare Extern Orientation Posttest Packet Having read the information on the Mission, Vision, Values and Expected Actions/Behaviors, write a brief description of how you will incorporate
10. ENVIRONMENTAL MANAGEMENT PLAN
10. ENVIRONMENTAL MANAGEMENT PLAN 10.1 Introduction The Environmental Management System (EMS) is designed to provide a process to ensure the Project s compliance with the applicable national and international
Bloodborne Pathogens
Bloodborne Pathogens Learning Objectives By the end of this section, the participant should be able to: Name 3 bloodborne pathogens Identify potentially contaminated bodily fluids Describe 3 safe work
School Science Lab Safety Guidelines
School Science Lab Safety Guidelines Occupational Safety & Health Bureau Montana Department of Labor & Industry Prepared for Montana Employers by the Occupational Safety & Health Bureau Department of Labor
MD 52 WASTE MANAGEMENT AUTHORITY CORPORATE HEALTH AND SAFETY PROGRAM
UNSAFE ACTS AND CONDITIONS All accidents are the result of an unsafe act, an unsafe condition or a combination of both. Unsafe acts account for approximately 80% of all incidents/accidents, while unsafe
IX. EMERGENCY PLANNING
IX. EMERGENCY PLANNING EMERGENCY PLANNING, SPILL RESPONSE & REPORTING Any unexpected event or accident situation that occurs during the transport, storage or use of hazardous materials constitutes a potential
Overhead #7 Overhead #8 Key Points of This Training You will learn more about: Identifying and reducing hazards on the job Identifying and reducing hazards in healthcare jobs Laws that protect teens from
Model Safety Program
Model Safety Program DATE: SUBJECT: Contractor Safety Verification Program REGULATORY STANDARD: OSHA 29 CFR RESPONSIBILITY: The, is solely responsible for all facets of this program and has full authority
3053 Electrical Safety Training Program Course Outline
3053 Electrical Safety Training Program Course Outline The following outline summarizes the major points of information presented in the program. The outline can be used to review the program before conducting
Course Title: Safety Issues in Electronics Engineering Technology Number of Credits: 3 B.A. B.S. B.A.S A.A. A.S. Degree Type
GENERAL INFORMATION Name: Diane King Phone #: 77021 Course Prefix/Number: ETI3704 Course Title: Safety Issues in Electronics Engineering Technology Number of Credits: 3 B.A. B.S. B.A.S A.A. A.S. Degree
Site Induction Presentation
ABC Contracting Site Induction Presentation This presentation provides a mock site induction and serves to help those people in the process of preparing and delivering site inductions It is essential that
VISUAL management techniques to create a SAFE workplace environment
You won t GET LEAN... until you GET VISUAL! VISUAL management techniques to create a SAFE workplace environment Organizing a Safe Workplace: Personal Protective Equipment (PPE) Machine/Equipment/Process
Control of Hazardous Energy (Lockout / Tagout)
WAUKESHA COUNTY TECHNICAL COLLEGE Control of Hazardous Energy (Lockout / Tagout) Release Date: March 26, 2012 Revision Date: March 26, 2012 Revision Level: 1 TABLE OF CONTENTS Purpose... 1 Scope... 1 Responsibilities...