Part # Quick-Start Guide. SpeedStream Residential Gateway 6500 Series
|
|
|
- Cecil Jessie Morton
- 7 years ago
- Views:
Transcription
1 Part # Quick-Start Guide SpeedStream Residential Gateway 6500 Series
2 Before you begin, Verify that the following items came with your DSL kit: 1 SpeedStream Device 2 Documentation 1 2 Software Manual CD-ROM (Router model only) 4 Power supply 4 5 RJ-45 Straight-through Ethernet cable 6 RJ-11 DSL cable 5 6 Your service provider may include an Ethernet adapter, a line filter, and a wall-mount filter in your DSL kit. If you received any of these items, follow the instructions provided in this guide for basic installation. If you need further assistance installing these items, please contact your service provider. A PCI Ethernet adapter B Line filter(s) C Wall-mount filter A B C 2
3 Step 1 > Install Line Filters Stand-alone Line Filter 1 2 Wall-mount Filter 1 2 Devices such as fax machines, caller ID boxes, or phones that share the same phone line as your DSL account require a line filter, which prevents noise from disrupting the DSL signal on the phone line. Filters can be in the form of a stand-alone line filter or a wall-mount filter. Stand-alone Line Filter For each device that shares the DSL phone line: 1. Unplug the device s cord from the phone jack. 2. Plug the filter into the phone jack.. Plug the phone cord (or other device cord) into the filter. Wall-mount Filter For a wall-mount phone, install a wall-mount filter. 1. Remove the phone. 2. Connect the wall-mount filter to the wall plate.. Reconnect the phone.
4 Step 2 > Choose an Installation Method The SpeedStream 6500 and 6515 devices can only be connected to an Ethernet port; the SpeedStream 6520, 650, and 6540 devices can be connected to an Ethernet port and/or a USB port. To connect to an Ethernet port, compete the steps in Option A. To connect to a USB port, complete the steps in Option B. Option A > Ethernet Installation Method Install Ethernet Adapter You will need to install an Ethernet adapter if your computer does not already have one installed. Refer to your Ethernet adapter manufacturer s documentation for complete installation instructions. Connect the SpeedStream Device 1. Connect the straightthrough Ethernet cable (RJ-45) to the Ethernet port on the SpeedStream device (yellow port). 2. Connect the other end of the straight-through Ethernet cable (RJ-45) to the Ethernet port on your computer.. Plug the DSL cable (RJ-11) into the DSL port on the SpeedStream device (gray port). 4. Plug the other end of the DSL cable (RJ-11) into the phone jack. 5. Plug the power adapter into the power outlet and SpeedStream device (black port). 6. Ensure the SpeedStream device is powered on (power switch located on right side of back panel). 4 RJ-11 DSL cable Internet connection Ethernet connection to computer RJ-45 Straight-through Ethernet cable 2 1 Power supply Hub Optional: use crossover (Xover) cable when connecting to a hub or switch without an uplink port You have completed the installation of your SpeedStream hardware. There is no software installation required when using the Ethernet connection method. If you have the router model, proceed to Step to configure your router and connect to the Internet
5 Option B > USB Installation Method Connect the SpeedStream Device 1. Connect the USB cable to the USB port at the rear of the SpeedStream device (blue port). 2. Connect the other end to the USB port on your computer.. Plug the DSL cable (RJ-11) into the DSL port on the SpeedStream device. 4. Plug the other end of the cable (RJ-11) into the phone jack. 5. Plug the power adapter into the power outlet and SpeedStream device. 6. Ensure the SpeedStream device is powered on (power switch located on right side of back panel). 4 RJ-11 DSL cable Internet connection 2 USB connection to computer Power supply You have completed the installation of your SpeedStream DSL hardware. Install the USB driver software on your PC using one of the procedures below Windows USB Driver Installation Software Installation You will need to install USB drivers if you are connecting the SpeedStream device to your computer via the USB port. Before installing the software, make sure your PC is equipped with the following: Windows 98, Windows 98 Second Edition (SE), Windows 2000 Professional, Windows Millennium Edition (Me), or Windows XP; 2 MB RAM; Pentium-compatible 166 MHz or faster processor; 12 MB available hard disk space. 1. Insert the SpeedStream Installation CD into your CD-ROM drive. This will automatically start the software installation program. Follow the on-screen directions to complete the software installation. 2. After the USB driver is installed, continue with PC Configuration Procedures described on the next page. If the software installation program does not automatically start, you can manually start it using the following procedure. 1. Click Start > Run. 2. Browse to setup.exe on the CD and double-click it. This will start the software installation program.. Follow the on-screen directions to complete the software installation. Macintosh USB Driver Installation Software Installation Before installing the software, make sure your Mac is running OS 8.6 or above. This procedure will restart your computer to complete the installation. 1. Insert the SpeedStream Installation CD into your CD-ROM drive. 2. Open the SpeedStream Icon from the desktop.. Click Readme.txt. 4. Follow the directions in the Readme.txt to complete the software installation. 5. After the USB driver is installed, continue with PC Configuration Procedures described on the next page. 5
6 Step > PC Configuration Procedures Windows Configuration In order to setup the SpeedStream device, your PC must first be configured to obtain an IP address from a DHCP server. Follow the procedure below: Note: The following procedures cover configuration of a PC running Windows XP. Please refer to the User Guide on the CD-ROM for help configuring other operating systems. 1. Click Start > Control Panel. 2. Double-click the Network Connections icon.. Double-click your Network Card. 4. Click Properties. 5. Select Internet Protocol (TCP/IP). 6. Click Properties. 7. Select Obtain an IP address automatically. 8. Select Obtain DNS server address automatically. 9. Click OK and exit out of the Control Panel. 10. Configure Internet Access using the procedure that follows. Internet Access Next, make sure your PC will use the SpeedStream device (and not Dial-Up Networking) when connecting to the Internet. Follow the procedure below: 1. Click Start > Control Panel. 2. Double-click the Internet Options icon.. Click the Connections tab. 5. Click Next. 6. Click Connect to the Internet. 7. Click Next. 8. Click Setup my connection manually. 9. Click Next. 10. Select Connect using a broadband connection that is always on. 11. Click Next. 12. Click Finish. 1. Configure the Gateway using the Gateway Configuration procedure that follows. Configure the Gateway Windows Me and XP users: If you have Universal Plug and Play (UPnP) enabled, Windows may detect the SpeedStream device upon startup and provide a Shortcut to the device on the desktop or system task tray. The icon will be labeled as Residential Gateway. Double-click the icon and skip to step. 1. Start your Web browser. In the Address box, enter the following: 2. Press Enter. The SpeedStream Simple Setup Wizard will launch.. At the end of the Setup Wizard, you will be given the option to either connect to the Internet or further configure the optional settings of the gateway. 4. If additional configuration is desired, select the icon for the service or option you wish to configure: the gateway s firewall and security settings, User Profiles and content filtering, or home network options. For non-standard configurations or troubleshooting procedures, consult the User Guide on CD-ROM. 4. Click Setup. Congratulations! You have completed the installation of your SpeedStream device. 6
7 Macintosh Configuration Procedures Macintosh Configuration In order to setup the SpeedStream device, your computer must first be configured to obtain an IP address from a DHCP server. Follow the procedure below for OSX: 1. Click Apple -> System Preferences. Follow the procedure below for OS9: 1. Click Apple -> Control Panels -> TCP/IP. 2. Select the Network icon under the Internet & Network section.. Select Built-in Ethernet from the Show drop-down menu. 4. Select Using DHCP Server from the Configure IPv4 drop-down menu. 5. Click Apply Now and exit out of System Preferences window. 6. Configure the Gateway using the Gateway Configuration procedure that follows. 2. Select Ethernet from Connect via drop-down menu.. Select Using DHCP Server from the Configure drop-down menu. 4. Close window and save changes. 5. Configure the Gateway using the Gateway Configuration procedure that follows. Configure the Gateway If your PC has not been connected to a broadband modem or other network device, you will need to perform the PC configuration procedure below. Remember to restart each PC when finished. 1. Start your Web browser. In the Address box, enter the following: 2. Press Enter. The SpeedStream Simple Setup Wizard will launch.. At the end of the Setup Wizard, you will be given the option to either connect to the Internet or further configure the optional settings of the gateway. 4. If additional configuration is desired, select the icon for the service or option you wish to configure: the gateway s firewall and security settings, User Profiles and content filtering, or home network options. For non-standard configurations or troubleshooting procedures, consult the User Guide on CD-ROM. Congratulations! You have completed the installation of your SpeedStream device. 7
8 Troubleshooting LED Off Green Blinking Green Power Ethernet Wireless DSL Internet Activity (if present) USB (if present) - DSL signal not detected - No LAN data activity - No WAN or LAN activity Normal system operation Normal Ethernet operation, Link okay Normal wireless operation, Link okay DSL line is trained and ready for traffic - DSL link is up and - WAN interface is up and - WAN interface has IP Address USB connected User traffic flowing in either direction Wireless user traffic flowing in either direction Steady blinking- DSL line is attempting to train Blinking Red/Green Flash write in progress Red - POST in progress - POST error occurred (if persistent) LAN user traffic flowing in either direction USB traffic flowing in either direction HPNA (if present) - Normal HPNA operation - Link okay HPNA traffic flowing in either direction Home Plug (if present) - Normal Home Plug operation - Link okay Home Plug traffic flowing in either direction Siemens Subscriber Networks, Inc Alpha Road Dallas, TX (972) Fax (972) usa.800siemens@icn.siemens.com 8 Copyright 2004 SIEMENS SUBSCRIBER NETWORKS, INC. All rights reserved. Siemens and the Siemens logo are trademarks of Siemens AG, Germany. All other trademarks are held by their respective companies. Siemens reserves the right to make changes to product specifications at any time without notice.
Quick-Start Guide 007-SE01-001. Gigaset. Residential Wireless Gateway SE567/SE568. Gigaset Communications GmbH is a trademark licensee of Siemens AG
Quick-Start Guide 007-SE01-001 Gigaset Residential Wireless Gateway SE567/SE568 Gigaset Communications GmbH is a trademark licensee of Siemens AG Before you begin... Verify that the following items came
DSL Installation Guide
DSL Installation Guide Thank you for choosing Integra Telecom s DSL service! Introduction This guide will walk you through the DSL installation process and will help you configure a computer to access
Frontier DSL SelfConnect Guide
Frontier DSL SelfConnect Guide Frontier DSL Self-Installation Guide Table of Contents Getting Started...2 Customer and Computer Requirements...2...3 STEP 1: Install Microfilters...3 STEP 2: Install Your
Linksys Gateway SPA2100-SU Manual
Linksys Gateway SPA2100-SU Manual Manuel de l'utilisateur Table of Contents Looking for Basic Setup Instructions?... 3 Most Recent Version of this Manual... 3 Advanced Setup Instructions... 4 Wiring Your
DSL Self-install Kit Instructions. SpeedStream 5360
DSL Self-install Kit Instructions SpeedStream 5360 Cover and installation notes Page 1 1. Verify your system requirements Page 2 2. Verify the contents of your DSL Self-Install kit Page 2 3. Install filters
DSL Self-install Kit Instructions. SpeedStream 4100
DSL Self-install Kit Instructions SpeedStream 4100 Cover and installation notes Page 1 1. Verify your system requirements Page 2 2. Verify the contents of your DSL Self-Install kit Page 2 3. Install filters
PSC Defective Customer Equipment Return Policy
Copyright 2010 PSC PSC Defective Customer Equipment Return Policy Customer Equipment purchased from PSC can be returned with proof of purchase for identical or comparable equipment, at no cost to you within
DSL Self-install Kit Instructions
DSL Self-install Kit Instructions Cover and installation notes Page 1 1. Verify your system requirements Page 2 2. Verify the contents of your DSL Self-Install kit Page 2 3. Install filters on your telephone
Broadband DSL Quick Start Set Up Guide
Broadband DSL Quick Start Set Up Guide Index What s in the box?... 1 Applying the DSL filters... 2 What devices must be filtered... 3 Connecting the DSL modem... 3-5 Connecting a computer... 5 Setting
You may refer the Quick Installation Guide in the package box for more information.
Hardware Installation: 1. Turn off your modem. 2. Use one Ethernet cable to connect your modem to WAN port (Blue) port of BR-6228nC. 3. Use another Ethernet cable to connect your PC to one LAN Port (Yellow)
Connecting to the Internet. LAN Hardware Requirements. Computer Requirements. LAN Configuration Requirements
Connecting to the Internet LAN Hardware Requirements Computer Requirements LAN Configuration Requirements Installation Performed by Time Warner Cable Technician Connecting via Ethernet Connecting via USB
Westell VERSALINK GATEWAY (MODEL 327W) Quick Start Guide. 030-300391 Rev. A May 2004
Westell VERSALINK GATEWAY (MODEL 327W) Quick Start Guide Westell, Inc. Quick Start Guide 2 Congratulations! You are on your way to experiencing the Internet with DSL at speeds significantly faster than
High-Speed Broadband Internet Guide
High-Speed Broadband Internet Guide Welcome Welcome to SkyBest High-Speed Broadband Internet. SkyBest High-Speed Broadband Internet allows for rapid downloading of large files, such as music and graphics.
1. Hardware Installation
4 Port 10/100M Internet Broadband Router with USB Printer server Quick Installation Guide #4824904AXZZ0 1. Hardware Installation A. System Requirement Before you getting started, make sure that you meet
TELUS Internet set up guide. Read me first
TELUS Internet set up guide Read me first Welcome Thank you for choosing TELUS. The 8 simple steps in this guide will help you set up your wireless gateway and quickly connect to the Internet. If you have
Contents. Section A Networking Basics... 1. 1 Learning the Basics... 3. Section B Wired Ethernet Networking... 17
Contents Section A Networking Basics...................................... 1 1 Learning the Basics............................................. 3 Selecting a network connection........................................
CPEi 800/825 Series. User Manual. * Please see the Introduction Section
CPEi 800/825 Series User Manual * Please see the Introduction Section Contents Introduction...iii Chapter 1: CPEi 800/825 User Guide Overview... 1-1 Powerful Features in a Single Unit... 1-2 Front of the
WIRELESS INTERNET TROUBLESHOOTING GUIDE. 320.834.5151 888.236.3574 www.gctel.com. Help Desk 320.834.5155
WIRELESS INTERNET TROUBLESHOOTING GUIDE 320.834.5151 888.236.3574 www.gctel.com Help Desk 320.834.5155 Table of Contents Check Physical Connection Connection Diagram - Page 1 Power Inserter - Page 2 Identify
Quick Start Guide. Vonage Device Motorola VT2142
Quick Start Guide Vonage Device Motorola VT2142 Before you begin 1. If you purchased your Vonage Device from a retail store, you must first activate your Vonage phone service. (You will need to provide
Business Wireless Internet quick install guide
Read me first Business Wireless Internet quick install guide Wi-Fi and email set-up instructions included Actiontec Wireless Gateway TELUS Internet account information Record your personal account information
Internet Guide. Prepared for 55 John Street
Internet Guide Prepared for 55 John Street I. Internet Service How do I connect to the Internet? WiFi (Wireless Connectivity) is available throughout the building. In order to connect, you will need a
2 Setting Up the Hardware for a Wired Ethernet Network... 13. 3 Setting Up the Software for an Ethernet Network... 21
Contents 1 Networking Basics............................................... 1 Selecting a network connection........................................ 2 Wired Ethernet network...........................................
Network Setup Guide. Introduction. Setting up for use over LAN
Network Setup Guide This manual contains the setup information required to use the machine over wired LAN. If you use the machine with USB connection, refer to your setup sheet. Introduction To use the
Connecting to the Internet
Connecting to the Internet Connecting the Gateway to the Internet Configuration of TCP/IP Protocol Installing the USB Drivers Connecting Ethernet Network Devices Connecting USB Network Devices Connecting
Troubleshooting and Setup Guide for Efficient SpeedStream 5100-a DSL Modem
Troubleshooting and Setup Guide for Efficient SpeedStream 5100-a DSL Modem Overview This troubleshooting and setup guide was created to assist you in ensuring the continued maintenance of your Internet
Installation Guide. EarthLink
Installation Guide EarthLink Welcome to EarthLink DSL & Home Phone Service Congratulations! You ve made the smart choice for super-fast DSL and super-simple phone service. Follow the instructions in this
Installation Guide (No Router)
Installation Guide (No Router) This installation guide will show you how to get your voip phone service working. This installation guide should be used if you have a standard DSL or cable modem and no
Internet Services DSL INTERNET TROUBLESHOOTING GUIDE. 320.834.5151 888.236.3574 www.gctel.com. Help Desk 320.834.5155
Internet Services DSL INTERNET TROUBLESHOOTING GUIDE 320.834.5151 888.236.3574 www.gctel.com Help Desk 320.834.5155 Table of Contents Modem Troubleshooting Checklist - Page 2 Identify Your Modem - Page
Prestige 660R-6x Read Me First
Prestige 660R-6x Read Me First Prestige Rear Panel Connections DSL PORT CONNECTION Connect the DSL port on the Prestige to the wall jack using the included DSL cable (telephone wire). Connect the micro
Wireless G Broadband quick install
Wireless G Broadband Router quick install guide Model 503693 INT-503693-QIG-0608-02 Thank you for purchasing the INTELLINET NETWORK SOLUTIONS Wireless G Broadband Router, Model 503693. This quick install
CONTENTS ACTIONTEC DSL MODEM: 3. DSL Kit Contents 3 CONFIGURING YOUR COMPUTER: 5. Static IP Address Setup 5 Dynamic IP Address Setup 7
CONTENTS ACTIONTEC DSL MODEM: 3 DSL Kit Contents 3 CONFIGURING YOUR COMPUTER: 5 Static IP Address Setup 5 Dynamic IP Address Setup 7 ACTIONTEC DSL MODEM INSTALLATION: 9 Actiontec DSL Modem Installation
NetLINE Wireless Broadband Gateway
NetLINE Setup Guide Farallon s NetLINE connects to your cable/dsl modem, allowing computers on your local wired and wireless networks to share a single broadband connection to the Internet. This Setup
Prestige 314 Read Me First
Prestige 314 Read Me First Console WAN 10M PORT Prestige Rear Panel Connections CONNECTION Use an RS-232 console cable. Use the cable that came with your broadband modem. LAN 10/100M Port Number COMPUTER
HYPERLINK Internet PC setup guide. HYPERLINK Internet support helpdesk at 1-866-302-5525.
HYPERLINK Internet support helpdesk at 1-866-302-5525. Congratulations on your new residence and welcome to HYPERLINK Internet service. In a few short moments you will be connected to one of the fastest
Quick Start Guide. Vonage VWR Device
Quick Start Guide Vonage VWR Device Before you begin 1. If you purchased your Vonage Device from a retail store, you must first activate your Vonage phone service. (You will need to provide the MAC ID
DI-634M. Check Your Package Contents. This product can be set up using any current web browser, i.e., Internet Explorer 6 or Netscape Navigator 7.
This product can be set up using any current web browser, i.e., Internet Explorer 6 or Netscape Navigator 7. DI-634M 108G MIMO Wireless Router Before You Begin 1. If you purchased this router to share
ACT High Speed WiMAX Internet
ACT High Speed WiMAX Internet Internet Configuration Manual This manual walks you through the steps of configuring your computer for High Speed WiMAX Internet service with Windows 7, Vista, XP, 2000, And
Prestige 650R-31/33 Read Me First
Prestige 650R-31/33 Read Me First Prestige Rear Panel Connections PORT DSL CONSOLE LAN 10/100M POWER Connect to a telephone jack using a telephone wire. CONNECTION Connect to a serial port (COM port) on
Actiontec Router Troubleshooting
Actiontec Router Troubleshooting You can use the Power, DSL, and Ethernet lights on the front panel of the Actiontec router to help diagnose home networking connectivity problems. Follow the steps below
Networking. General networking. Networking overview. Common home network configurations. Wired network example. Wireless network examples
Networking General networking Networking overview A network is a collection of devices such as computers, printers, Ethernet hubs, wireless access points, and routers connected together for communication
2Wire Gateway Installation Guide. For 1000 Series
2Wire Gateway Installation Guide For 1000 Series Notice to Users 2005 2Wire, Inc. All rights reserved. This manual in whole or in part, may not be reproduced, translated, or reduced to any machinereadable
Additional Requirements for ARES-G2 / RSA-G2. One Ethernet 10 Base T/100 Base TX network card required for communication with the instrument.
TA Instruments TRIOS Software Installation Instructions Installation Requirements Your TRIOS Instrument Control software includes all the components necessary to install or update the TRIOS software, as
Network Adapter Configuration Guide for Macintosh OS X
Network Adapter Configuration Guide for Macintosh OS X Hardware and Driver Installation With the Mac OS X correctly installed on your computer, installing an Asanté network adapter is easy. Simply follow
Wireless Router Setup Manual
Wireless Router Setup Manual NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA 208-10082-02 2006-04 2006 by NETGEAR, Inc. All rights reserved. Trademarks NETGEAR is a trademark of Netgear,
Cisco 831 Router and Cisco SOHO 91 Router Cabling and Setup Quick Start Guide
English CHAPTER 1 Cisco 831 Router and Cisco SOHO 91 Router Cabling and Setup Quick Start Guide Cisco One-Year Limited Hardware Warranty Terms Easy Installation: Try These Steps First! (CRWS Users) Overview
Unified Communications Installation & Configuration Guide
Unified Communications Installation & Configuration Guide Table of contents Page Applications License 1 Mitel 5110 Softphone 5 Click to Dial Application 22 Applications License Obtaining and Configuration
DSL Self-Install Kit Instructions
DSL Self-Install Kit Instructions Please follow these instructions carefully. Pacific Online assumes no responsibility for any personal injury or property damage which may result form your installation
Table of Contents. 0. Internet Connectivity Assumptions..2. 0. Identifying the Network Wall Jack... 2. 0. Identifying the Ethernet Cable..
Table of Contents 0. Internet Connectivity Assumptions..2 0. Identifying the Network Wall Jack... 2 0. Identifying the Ethernet Cable..4 0. Identifying the Network Interface Card...5 0. Connecting Your
HP-1000 Powerline USB Adapter
HP-1000 Powerline USB Adapter User s manual BEFORE INSTALLATION Plan ahead the installation of your powerline network. Note: You will need at least two powerline adapters to create a powerline network.
HP-1000 Powerline Ethernet Adapter
HP-1000 Powerline Ethernet Adapter User s manual BEFORE INSTALLATION Plan ahead the installation of your powerline network. Note: You will need at least two powerline adapters to create a powerline network.
If you need additional assistance please contact our Technical Support Center at 24 hours a day, 7 days a week.
Cisco SPA 2100 Phone Adapter Installation Manual Index Installation of the Cisco SPA 2100 Phone Adapter to NationPhone P. 1 Index, before you begin, and what is included P.2 Installing the NationPhone
Actiontec GT784WN Router
Table of Contents General Information...1 Verify Computer Settings...1 Router Installation...3 Configuring Your Router...3 Configuring Your Computer...7 Configuring Your Email...9 General Information Router
Prestige 324. Prestige 324. Intelligent Broadband Sharing Gateway. Version 3.60 January 2003 Quick Start Guide
Prestige 324 Intelligent Broadband Sharing Gateway Version 3.60 January 2003 Quick Start Guide 1 Introducing the Prestige The Prestige is a broadband sharing gateway with a built-in four-port 10/100 Mbps
Prestige 324 Quick Start Guide. Prestige 324. Intelligent Broadband Sharing Gateway. Version V3.61(JF.0) May 2004 Quick Start Guide
Prestige 324 Intelligent Broadband Sharing Gateway Version V3.61(JF.0) May 2004 Quick Start Guide 1 1 Introducing the Prestige The Prestige is a broadband sharing gateway with a built-in four-port 10/100
P-2612HNU-Fx. 802.11n ADSL2+ VoIP IAD DEFAULT LOGIN DETAILS. Firmware V3.00 Edition 1, 1/2010. Password: 1234 User Name: admin Password: 1234
P-2612HNU-Fx 802.11n ADSL2+ VoIP IAD Firmware V3.00 Edition 1, 1/2010 DEFAULT LOGIN DETAILS IP Address: User Login: Administrator Login: http://192.168.1.1 User Name: user Password: 1234 User Name: admin
VersaLink 7500 Gateway Troubleshooting
VersaLink 7500 Gateway Troubleshooting You can use the Power, Ethernet, DSL and Internet lights on the front panel of the Westell VersaLink 7500 gateway to help diagnose a connection issue with your Westell
c. Securely insert the Ethernet cable from your cable or DSL modem into the Internet port (B) on the WGT634U. Broadband modem
Start Here Follow these instructions to set up your router. Verify That Basic Requirements Are Met Assure that the following requirements are met: You have your broadband Internet service settings handy.
CMP-102U. Quick Installation Guide
CMP-102U Quick Installation Guide V1.0 http://www.cnet.com.tw 1 CMP-102U Supports One High-speed USB2.0 Port MFP Server Supports 10/100Mbps Fast Ethernet Network Quick Installation Guide 1 Package Contents:
RESIDENTIAL DSL SERVICES
RESIDENTIAL DSL SERVICES Introduction to DSL What is DSL? DSL (digital subscriber line) allows high-speed data access over a standard phone line, also known as a POTS (plain old telephone system) line
Self Help Guide IMPORTANT! Configuring Your Router With Your Modem. Please read the following carefully; This Guide refers to the following Products:
IMPORTANT! This Guide refers to the following Products: Configuring Your Router With Your Modem Please read the following carefully; Synopsis: A standard (Wireless) Router does not come equipped with the
Belkin High Speed Cable Modem with USB and Ethernet. User Manual
Belkin High Speed Cable Modem User Manual P74206 F5D5530-W Introduction Congratulations on your purchase of this quality Belkin product. The Belkin High-Speed Cable Modem allows you to enjoy the Internet
High-Speed Broadband Internet Guide
High-Speed Broadband Internet Guide Welcome Welcome to SkyBest High-Speed Broadband Internet. SkyBest High-Speed Broadband Internet allows for rapid downloading of large files, such as music and graphics.
Omni 56K USB Lite Quick Start Guide
Omni 56K USB Lite Quick Start Guide ZyXEL TOTAL INTERNET ACCESS SOLUTION 1. Hardware Installation Connect your modem to your analog phone or fax. Use the phone cord included to connect to the phone jack
This document will show you how to set up the Hotwire 6205 ADSL Modem, and how to customize its configuration to get the most out of this product.
Hotwire 6205 ADSL Modem Installation Instructions Document Number 6205-A2-GZ40-00 July 2004 Introduction Congratulations on becoming the owner of a Hotwire ADSL USB Modem. You will now be able to surf
Motorola Phone Tools. Quick Start
Motorola Phone Tools Quick Start Contents Minimum Requirements...2 Before Installing Motorola Phone Tools...3 Installing Motorola Phone Tools...4 Mobile Device Installation and Configuration...5 Online
Chapter 1 Installing the Gateway
Chapter 1 Installing the Gateway This chapter describes how to set up the wireless voice gateway on your Local Area Network (LAN), connect to the Internet, and perform basic configuration. For information
ADSL Router Quick Installation Guide Revised, edited and illustrated by Neo
ADSL Router Quick Installation Guide Revised, edited and illustrated by Neo A typical set up for a router PCs can be connected to the router via USB or Ethernet. If you wish to use a telephone with the
CSU Bakersfield Residential Network (ResNet) Installation and Troubleshooting Guide
CSU Bakersfield Residential Network (ResNet) Installation and Troubleshooting Guide Standard Installation Procedures (Macintosh and Windows PCs)..Page 2 Software Installation for Windows 95/98/ME/2000..Page
Installing Your Vonage Device in Front of an Existing Router for customers with DSL INTERNET SERVICE
Installing Your Vonage Device in Front of an Existing Router for customers with DSL INTERNET SERVICE Figure 1. Sample Installation Setup - Vonage phone adapter in front of router 1. Determine Internet
RedRapid X WIRELESS MODEM ROUTER. Quick Installation Guide (DN-7060)
RedRapid X WIRELESS MODEM ROUTER Quick Installation Guide (DN-7060) 1. Product Introduction Congratulations on purchasing this Wireless N ADSL2/2+ Router. This router is a cost-effective ADSL2+ router,
Home Network. Installation Instructions
Home Network Installation Instructions TM Installation Instructions Table of Contents Overview...2 Installation Considerations...2 Quick Installation Instructions...2 Identifying and Creating the Home
Prestige 623R-T. Quick Start Guide. ADSL Dual-link Router. Version 3.40
Prestige 623R-T ADSL Dual-link Router Quick Start Guide Version 3.40 February 2004 Introducing the Prestige The Prestige 623R-T ADSL Dual-link Router is the ideal all-in-one device for small networks connecting
Maxtor OneTouch User's Guide
EXTERNAL HARD DRIVE Maxtor OneTouch User's Guide TM II P/N:20259600 i Contents 1 Introduction................................................. 1 Maxtor OneTouch II Drive Components............................
Software Installation Guide
Software Installation Guide This manual explains how to install the software over a USB or network connection. Network connection is not available for models SP 200/200S/203S/203SF/204SF. To manually configure
WiFi DSL Modem Router
Support Thank you for purchasing this NETGEAR product. After installing your device, locate the serial number on the label of your product and use it to register your product at https://my.netgear.com.
Option nv, Gaston Geenslaan 14, B-3001 Leuven Tel +32 16 317 411 Fax +32 16 207 164 http://www.option.com Page 1 of 14
Page 1 of 14 ! " #!"#$ % &&' Page 2 of 14 1 INTRODUCTION One of the highly desirable features of the GlobeSurfer III device is the ability to network together Printers and External Hard Disk drives (aka
High Speed DSL Internet Guide
High Speed DSL Internet Guide nwtel.ca/internet 1-888-423-2333 Welcome to Northwestel s High Speed DSL Internet! We are pleased to welcome you to our northern network of family and friends. Here at Northwestel
Chapter 3 Connecting the Router to the Internet
Chapter 3 Connecting the Router to the Internet This chapter describes how to set up the router on your Local Area Network (LAN) and connect to the Internet. It describes how to configure your DG834GT
OfficeConnect Internet Firewall 25 Internet Firewall DMZ. QuickStart Guide (3C16770, 3C16771)
OfficeConnect Internet Firewall 25 Internet Firewall DMZ QuickStart Guide (3C16770, 3C16771) Checking Package Contents Getting Started Thank you for purchasing the OfficeConnect Internet Firewall. The
User Guide HUAWEI UML397. Welcome to HUAWEI
User Guide HUAWEI UML397 Welcome to HUAWEI 1 Huawei UML397 4G LTE Wireless Modem User Manual CHAPTER 1 BEFORE USING YOUR UML397 WIRELESS MODEM ABOUT THIS USER MANUAL...4 WHAT S INSIDE THE PRODUCT PACKAGE...4
Wightman Telecom Wireless Router Quick Reference Booklet
Wightman Telecom Wireless Router Quick Reference Booklet Thank you for choosing Wightman Internet. The information in this booklet will guide you through the process of connecting to the internet with
P-660HWP-Dx. Quick Start Guide. 802.11g HomePlug AV ADSL2+ Gateway. Version 3.40 7/2007 Edition 1. Copyright 2007. All rights reserved.
P-660HWP-Dx 802.11g HomePlug AV ADSL2+ Gateway Quick Start Guide Version 3.40 7/2007 Edition 1 Copyright 2007. All rights reserved. Overview The P-660HWP-Dx is a gateway which combines high-speed ADSL
Installation Guide Wireless 4-Port USB Sharing Station. GUWIP204 Part No. M1172-a
Installation Guide Wireless 4-Port USB Sharing Station 1 GUWIP204 Part No. M1172-a 2011 IOGEAR. All Rights Reserved. PKG-M1172-a IOGEAR, the IOGEAR logo, MiniView, VSE are trademarks or registered trademarks
Using a simple crossover RJ45 cable, you can directly connect your Dexter to any computer.
Dexter is a network device using the Ethernet protocol to connect and communicate with other devices on the network: Computers, routers, DHCP servers. Thus you have to setup your Dexter and your network
Congratulations on your HomePortal purchase. To install your HomePortal and configure your home network, follow these steps.
Notice to Users 2003 2Wire, Inc. All rights reserved. This manual in whole or in part, may not be reproduced, translated, or reduced to any machine-readable form without prior written approval. 2WIRE PROVIDES
If you are unable to set up your Linksys Router by using one of the above options, use the steps below to manually configure your router.
This article describes how to manually configure a Linksys Router for broadband DSL that uses PPPoE (Point-to-Point Protocol over Ethernet) for authentication. For automatic configuration options, please
N750 WiFi DSL Modem Router Premium Edition
Support Thank you for purchasing this NETGEAR product. After installing your device, locate the serial number on the label of your product and use it to register your product at https://my.netgear.com.
Router Setup Manual. NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA 208-10060-01 2006-03-17
NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA 208-10060-01 2006-03-17 2006 by NETGEAR, Inc. All rights reserved. Trademarks NETGEAR is a trademark of Netgear, Inc. Microsoft, Windows,
ethernet connection For more information about the printer's ethernet feature, click the topic below: ethernet lights network configuration page
ethernet table of contents ethernet connection The printer's built-in ethernet feature allows you to connect the printer directly to an ethernet network without the need for an external print server. For
Ultra Thin Client TC-401 TC-402. Users s Guide
Ultra Thin Client TC-401 TC-402 Users s Guide CONTENT 1. OVERVIEW... 3 1.1 HARDWARE SPECIFICATION... 3 1.2 SOFTWARE OVERVIEW... 4 1.3 HARDWARE OVERVIEW...5 1.4 NETWORK CONNECTION... 7 2. INSTALLING THE
P-660R-T1 v3 QUICK START GUIDE. ADSL2+ Access Router DEFAULT LOGIN DETAILS. Firmware v3.40 Edition 1, 09/2008. IP Address: http://192.168.1.
P-660R-T1 v3 QUICK START GUIDE ADSL2+ Access Router Firmware v3.40 Edition 1, 09/2008 DEFAULT LOGIN DETAILS IP Address: http://192.168.1.1 Username: admin Password: 1234 www.zyxel.com Copyright C 2008
Enabling Internet Connection Sharing on Windows 2000 15. Enabling ICS On Windows XP As The Host 4 Enabling ICS On Windows XP As The Client 11
Sharing an Internet Connection with SatDirect Plus Table of Contents Contents Section 1: Section 2: Section 3: Introduction... 1 Physical Setup......2 Enabling Internet Connection Sharing on Windows XP
DVG-2101SP VoIP Telephone Adapter
This product can be set up using any current web browser, i.e., Internet Explorer 6 or Netscape Navigator 6.2.3. DVG-2101SP VoIP Telephone Adapter Before You Begin 1. If you purchased this VoIP Telephone
Broadband ADSL2+ Modem Model DM111Pv2 Setup Manual
Broadband ADSL2+ Modem Model DM111Pv2 Setup Manual NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA 95134 USA October 2014 208-10256-02 v1.0 Support Thank you for selecting NETGEAR products. After installing
Prestige 202H Plus. Quick Start Guide. ISDN Internet Access Router. Version 3.40 12/2004
Prestige 202H Plus ISDN Internet Access Router Quick Start Guide Version 3.40 12/2004 Table of Contents 1 Introducing the Prestige...3 2 Hardware Installation...4 2.1 Rear Panel...4 2.2 The Front Panel
1-Port Wireless USB 2.0 Print Server Model # APSUSB201W. Quick Installation Guide. Ver. 2A
1-Port Wireless USB 2.0 Print Server Model # APSUSB201W Quick Installation Guide Ver. 2A Section 1 Step 1Connect one end of the Ethernet cable to the RJ-45 port of the Print Server and attach the other
4-Port Cable/DSL Gateway Router
4-Port Cable/DSL Gateway Router Share your broadband Internet connection and files User Manual F5D5231-4 TABLE OF CONTENTS Introduction....................................... 1 Overview.........................................
LMi.net DSL Modem Self-Install Guide
LMi.net DSL Modem Self-Install Guide Welcome to LMi.net! Here are the steps to complete your DSL installation. If you need any help with any of these steps call our Tech Support line at 510-843-6389 x300
Preparing the Computers for TCP/IP Networking
Configuration Preparing the Computers for TCP/IP Networking Configuring Windows 98, and ME for TCP/IP Networking Verifying TCP/IP Properties Configuring Windows 2000 or XP for IP Networking Install or
Network & Internet Installation & Information Guide Fall 2004 Edition. Campus Ethernet For PCs using Windows 2000 & XP
Network & Internet Installation & Information Guide Fall 2004 Edition Campus Ethernet For PCs using Windows 2000 & XP Table of Contents Overview... 2 Requirements... 2 Physically connect your computer