Heavy Duty Gauge-Style AM/FM Stereo Receiver, with built in USB, Auxiliary Inputs, and Bluetooth Audio Streaming

Transcription

1 Heavy Duty Gauge-Style AM/FM Stereo Receiver, with built in USB, Auxiliary Inputs, and Bluetooth Audio Streaming Installation/ Operation Manual 40W x 4 AW-10

2 Thank you for purchasing the AW-10 AM/FM/USB/Bluetooth /AUX Receiver from REI. This product is designed and tested to withstand temperature and vibration extremes. Please read the owner s manual carefully before attempting to install this unit. If you have an installation question or need installation assistance, please call the: SERVICE HOT LINE Toll Free USA & CANADA IF ADDITIONAL INSTALLATION COMPONENTS ARE NECESSARY, CONTACT YOUR REI SALES REP FOR: ** OEM /FACTORY WIRING HARNESS ADAPTERS ** ANTENNAS & ANTENNA ADAPTERS ** SPEAKERS & GRILLS Radio Engineering Industries, Inc L Street Omaha, Nebraska FEATURES: Non-volatile memory back-up Electronic AM/FM Stereo Tuner Preset Up to 30 Radio Stations (18 FM, 12 AM) EURO and USA frequency bands 12/24 hr Clock modes Compact Chassis fits Standard Gauge Openings Rear RCA Aux Input USB input supports MP3/WMA playback Displays ID3 tag information Electronic Bass, Treble, Balance, and Fader Controls LED Backlighting Output Power 40W x 4 2

3 CONTROLS AND INDICATORS 1. Power ON/OFF/MUTE Button 2. Radio Station Tune Buttons 3. Volume Up/Down Buttons 4. Band Select/ Clock Display/PLAY PAUSE Button 5. Auto Store / Seek Button 6. Mode Button 3

4 BUTTON OPERATION 1) Power Button Press and HOLD the Power Button to turn the unit ON or OFF. press and release will MUTE the audio. Once on, a quick 2) Tune Buttons Press these buttons to select the PREVIOUS or NEXT track while in USB mode. Press these buttons to tune AM/FM stations. 3) Volume UP/DOWN buttons Press either VOL+ / VOL- buttons to increase or decrease the volume level 4) Band Button Press this button to change radio bands as follows: FM1 FM2 FM3 AM1 AM2 Press and HOLD this button to change between Clock and Mode Information display. Press the button to select the desired FM or AM band. 5) Auto Store / Seek Button Press and hold this button for 2 seconds to auto program available stations into the preset memory buttons. Quick press to auto SEEK up to the next station. 6) Mode Button Press this button to navigate between modes TUNER-USB-Bluetooth -AUX. NOTE: USB mode will not appear unless a USB drive is inserted. Press and HOLD to select BT PAIR, then quickly press again to access either: BASS (allows the user to adjust the BASS level) TREB (allows the user to adjust the TREBLE level) BAL FAD (allows the user to adjust the BALANCE from left to right) (allows the user to adjust the FADER from front to back) LOUD (selects either LOUDNESS ON or OFF) EQ AREA TUNING (selects between USA & EUROPEAN frequency bands) BEEP (turns the audible beep ON or OFF with each key press) TIME FORMAT (selects between 12Hr and 24Hr formats) (disables the tone settings and selects between OFF, FLAT, CLASS, POP, or ROCK) Change using the VOL+/VOL- buttons. If either Volume buttons have not been pressed for 5 seconds it will automatically revert back to the previous operation. 4

5 Radio Operation a. Press and HOLD the APS button. This function will erase previously memorized stations and store the newly searched stations. To CANCEL, press APS again. Once completed, the radio will scan for 5 seconds through each of the preset stations of either the AM or FM band and stop. b. Quick press and release the APS button to SEEK to the next strongest station. c. Press either buttons momentarily to AUTO scroll available preset stations. Press and HOLD either button again and the radio will display MANUAL. This mode allows the operator to manually tune UP or DOWN to a desired station. This mode will disappear after 3 continuous seconds without a tune up/down button press, and the radio will return to AUTO mode. d. Press the BAND button to access available AM and FM modes. Auxiliary Operation The AW-10 is equipped with a Rear RCA auxiliary input so you can connect to your portable audio player or satellite radio receiver. *It may be necessary to adjust the volume level of your portable devise to achieve an optimal volume level. USB Operation a. Insert a USB drive and the radio will automatically switch to USB input and begin playback of compatible media files. If ID3 tag information is present, it will scroll automatically on the front LCD. b. If in any other mode, press MODE to switch to USB PLAY to begin playback. c. Press the buttons to play either the Previous or Next tracks. d. Press and HOLD the buttons to manually Fast Forward or Rewind a song. e. Press the button to PAUSE/REUME playback of the current song. **Note: The unit's USB port does not support the Apple ipod or iphone. 5

6 Setting the Time With the radio s power ON, press hold the BAND button to display the time. Next, press and hold this button again until the hour display begins to flash. Press either VOL+/VOL- button to adjust the hour. Press BAND button again, and the minute display will flash. Press either VOL+/VOL- button to adjust the minutes. Press and hold the BAND button again to save the time on the LCD. Bluetooth Setup Operation This unit supports Bluetooth streaming from your iphone /Android and similar device. Pairing a device is as follows: a. Turn on the Bluetooth on your Bluetooth device. b. Press MODE to switch to the BT MUSIC. c. Press and hold MODE again to display BT PAIR. d. Press and hold MODE again to display PAIRING. e. Scan for the unit using your BT device. f. Select the AW_10 to complete the pairing process. If a pass code is required, enter 0000 and the connection will be automatically made. Bluetooth Audio Streaming Once a connection is successfully made, press MODE to select BT MUSIC. a. Press the button to PAUSE/REUME playback of the current song. b. Press the buttons to play either the Previous or Next tracks. 6

7 TROUBLE SHOOTING Problem Cause Solution Unit will not power on No sound Cannot tune radio stations No power to BATTERY wire or ACC wire, blown 10A main fuse or 1A accessory fuse. Speakers not connected; speakers connected with bad splices; Speakers shorted to ground; speaker load is not within 4-8 Ω. The antenna cable is not connected. The signal is too weak. The radio is in the wrong frequency AREA. Check for both ACC & BATTERY voltage with Multi-meter, check all fuses. Connect speakers to harness; check all spliced wires; verify speakers not shorted to chassis; verify total speaker impedance. Check volume level. Connect the antenna cable. Check that the frequency AREA is set to USA. USB media not playing, or says NO SONG Cannot stream Bluetooth audio Media is the wrong file type. Bluetooth device was not successfully paired. Convert files to a usable format, unit will only play MP3 or WMA file extensions. Pair the Bluetooth device and retry. AUX audio is distorted or low Aux source audio level is too weak or overdriven. Adjust the audio level of the auxiliary source then adjust the radio volume. 7

8 RADIO DIMENSIONS Check the opening to verify the radio will fit the following dimensions below. Check for clearance of the rear bracket also. INSTALLING THE RADIO 1. Verify that the round self-adhesive gasket is installed. If not, add the gasket to the rear of the unit. Route the radio s wires through the front of the hole, then place the radio into the opening. Align the front face for the best viewing angle. 8

9 2. With the radio in the desired location, install the rear mounting bracket. If the bracket is too tall to fit snug, remove a tab from the mounting bracket at the break lines on both sides to shorten its length. Once the fit is verified, add the supplied mounting nuts to the studs and tighten firmly. The bracket is adjustable for both vertical or horizontal mounting. To finish the installation, following the wiring diagram on the next page.. 9

10 ELECTRICAL CONNECTIONS Follow this easy wiring diagram when installing the Radio and Speakers. **An optional 10 USB Panel mount extension is available (P/N ), contact an REI sales representative for details Warning: This radio is designed for 12V DC Negative Ground Systems Only. Shorting or grounding any of the speaker wires can damage the radio and is not covered by warranty. 10

11 SPECIFICATIONS AUDIO SECTION Power supply voltage (negative ground)..12v DC (10V-18V) Standby Current mA Max Current Consumption A Speaker impedance Ohms per channel POWER OUTPUT Continuous Output into 4Ω, 20 to 20,000 Hz at 10 % THD x 18Watts Maximum Power Output (Volume control Maximum). 40W 4 (at 1kHz) FM TUNER Range.(USA) MHz (EUR) MHz Usable Sensitivity (S/N = 30dB)..7.34dBf.(0.6uV/75ohms) Signal to noise ratio...58db (Mono) Stereo separation (@ 1K Hz) dB AM TUNER Range. (USA)530 1,710 khz (EUR) 522 1,620 khz Usable Sensitivity (S/N = 20dB) dBuV (14.4uV) Signal to noise ratio (LEVEL60dbuV) db USB INTERFACE USB Standard...USB1.1/2.0 (Full Speed) Maximum Supply Current mA File System Fat16/32 MP3 decoding format..mpeg-1 & 2 Audio layer 3 WMA decoding format Ver. 7, 7.1,8,9,10,11 (2ch audio) (Windows Media Player) BLUETOOTH Version Bluetooth 2.0 Certified Frequency Range GHz Output power.+4dbm Max Profiles Supported. A2DP 1.2, AVRCP 1.0 AUXILIARY INPUT SPECIFICATIONS Input Voltage Maximum Voltage...1.2V Input impedance.10kω DIMENSIONS Chassis (W x H x D *does NOT include bracket depth) x 105 x 41 mm Weight oz *Due to continuous product improvement, specifications and design are subject to change without notice. 11

12 Radio Engineering Industries, Inc. Rev 0.3 Date: