ABLOY KEY DEPOSITS. ABLOY key deposits are used for storing route keys to apartment complexes, office buildings and factories.

Size: px

Start display at page:

Download "ABLOY KEY DEPOSITS. ABLOY key deposits are used for storing route keys to apartment complexes, office buildings and factories."

Nickolas Lawson
7 years ago
Views:

1 ABLOY KEY DEPOSITS ABLOY key deposits are used for storing route keys to apartment complexes, office buildings and factories.

2 Construction Key deposit housing Steel Cylinder housing Hardened steel Cylinder plug Brass Discs and washers Tin bronze Number of discs 11 Finish Key deposit housing Cylinder housing ABLOY CLASSIC ABLOY PROFILE ABLOY EXEC ABLOY DISKLOCK PRO ABLOY PROTEC Zinc plated Bright chrome Cylinder types avaible Package includes Cylinder, key deposit, and fitting nails. Application ABLOY key deposits are commonly used for storing route keys to apartment complexes, office buildings and factories. Route keys can be of use to utility companies such as electricity, telephone, gas or cable TV companies as well as fire departements. Route keys limit service people to access only those rooms where their equipment is installed.it also allows for the convenience of only having to carry one single key which can operate thousands of key deposits. The ABLOY key deposit cylinders allow each company to have their own unique key combination. The cylinder can be ordered keyed different, keyed alike or master keyed. When ordering, please specify Cylinder type Key deposit model 1. DESTINATION access denied access permitted Utility company key 2. The key in the key deposit limits service people to access only the route required. 2. Route key

3 Models available key deposit key deposit with microswitch key deposit with collar and dust plate key deposit with collar, dust plate and microswitch Fitting nails (2 pcs included) Installation 5153 cylinder Side view Concrete A recommendable installation height for a key deposit is more than 1,8 m, the back of the deposit a bit higher (about 4 degrees) than the front. ~4 o Drill a hole for the key deposit with a drill of Ø40 mm. N.B. the scheme from above With help of a drill jig, drill counter sinkings for retainer lugs to the key deposit using a rock-drill of Ø10 mm (measure drilling depth from the drill jig level.) Depth View from above Filling mass Clean up the key deposit hole carefully. Bend the retainer lugs a little outwards. Spread glue mass on the surface of the deposit, push the key deposit into the hole, rubbing it at the same time, and bend the lugs with help of an installing tool. Drill a deep hole, at least 55 mm, with a rock-frill of Ø5 mm, for nails and use holes in the retainer lugs fo the key deposit as a drill jig ( the length of the drill has to be at least 130 mm). Before you drill the second hole, drive the second nail loose into it. Nail heads have to be left so deep that the cylinder housing goes well into the right place. Finally, clean the inner parts of the key deposit from all splashed masses and check the function of the cylinder housing. For other installation alternatives please refer to the installation instructions delivered with the products. The key deposit remains about -5 mm from the surface level.

4 / kpl Suomen Painotuote, Joensuu

5 High Security Key Deposits for Walls and Doors Ideal for: Utility, Cable, Phone, ATM & Guard Service companies Abloy An ASSA ABLOY Group company

6 Application: Model A : Fixed End-Cap Commonly used for storage of keys to a single door or a main entrance door. Route person carries only one key that allows them entrance to one or thousands of locations. Each location has a key deposit which contains the individual door key stored inside. No need to carry hundreds of different keys for different locations. Easily installs in a door or a wall with a 2 inch (49.5 mm) hole, is fastened to the door from the inside. Key Deposit can only be removed from door by opening the lock and removing fixing screws. The hardened steel exterior cylinder resists physical attack and harsh environments. Model A - End-Cap (on interior side of door/wall) is fixed, (storage key can only be removed from the inside of the key tube with cylinder key). Model B - End-Cap can be removed from the interior side of door/wall without any special tools. Both models available with optional microswitch. High Security: The Abloy key deposit incorporates the patented ABLOY PROTEC rotating disc cylinder mechanism has 2 billion combinations. It is pick proof and has patented key control (no keys without authorized signature) and resists harsh environments. Exterior cylinder made of hardened steel for maximum resistance to physical attack. Models: KD001N : fits door/wall thickness mm KD002N : fits door/wall thickness mm Model B: Removable End-Cap Please specify End-Cap Model A (standard) or Model B when oredering. Flexibility in Keying: These key tubes can be keyed to other ABLOY PROTEC products such as Deadbolts, Door Cylinders, Padlocks, Cabinet Locks & Cam locks. Order KA (keyed alike) KD (keyed different) or MK (master keyed)or keyed to your existing ABLOY PROTEC key mm Door/Wall thickness mm Door/Wall thickness Other Wall Type models available for concrete & brick or Abloy An ASSA ABLOY Group company

KEY CYLINDER PLATFORMS

KEY CYLINDER PLATFORMS Inspired technology, unbeatable performance. Flexibility and security combine in Abloy s comprehensive range of sleek and effective door cylinders. Uniclass L41818 Version: August-11