THANK YOU FOR PURCHASING OUR STUDIO RTA OFFICE TECH DATA CENTER

Size: px

Start display at page:

Download "THANK YOU FOR PURCHASING OUR STUDIO RTA OFFICE TECH DATA CENTER"

Vivien Atkinson
7 years ago
Views:

1 THANK YOU FOR PURCHASING OUR STUDIO RTA OFFICE TECH DATA CENTER MODEL# R2 IF YOU REQUIRE ANY ASSISTANCE WITH ASSEMBLY, PARTS, OR INFORMATION ON OTHER PRODUCTS, PLEASE VISIT OUR WEBSITE: OR CALL OR WRITE THE FOLLOWING: 8700 REX ROAD PICO RIVERA, CA (562) FAX (562) (800) /30/03

2 ASSEMBLY INSTRUCTIONS IMPORTANT: CAREFULLY UNPACK & IDENTIFY EACH COMPONENT BEFORE ATTEMPTING TO ASSEMBLE. REFER TO PARTS LIST. PLEASE TAKE CARE WHEN ASSEMBLING THE UNIT AND ALWAYS SET THE TABLE TOPS ON A CLEAN, SOFT SURFACE LAY LEFT PANEL (5) ON SMOOTH, FLAT SURFACE. ATTACH FRONT METAL FRAME (2) AND REAR METAL FRAME (3) AS SHOWN USING ALLEN BOLTS (26). ATTACH REAR PANEL (4) TO REAR METAL FRAME (3) USING PHILLIPS SCREWS (28).

3 ATTACH RIGHT PANEL (8) TO METAL FRAMES USING ALLEN BOLTS (25) AND BOLT CONNECTORS (21). (ROTATE BOLT CONNECTORS (21) SO HOLE ALIGNS WITH BOLT (25) INSERT WOODEN DOWELS (18) INTO HOLES IN CROSSBRACE (9) (ADD 1 DROP OF GLUE) AND ATTACH TO RIGHT PANEL (8) USING PHILLIPS SCREWS (29).

4 ATTACH LOCKING CASTERS (16) AND NON-LOCKING CASTERS (17) AS SHOWN USING PHILLIPS SCREWS (28). PLACE RIGHT FRAME (6) ONTO METAL FRAMES AND ATTACH USING ALLEN BOLTS (26). ATTACH MIDDLE PANEL (7) TO CROSSBRACES (9) USING WOODEN DOWELS (18) AND PHILLIPS SCREWS (29). ATTACH MIDDLE PANEL (7) TO METAL FRAMES USING ALLEN BOLTS (25) AND BOLT CONNECTORS (21). (ROTATE BOLT CONNECTORS (21) SO HOLE ALIGNS WITH BOLT (25)

5 SLIDE LARGE SHELF (10) ONTO TABS AND ATTACH USING PHILLIPS SCREWS (31). SLIDE MEDIUM AND SMALL SHELVES (11 AND 12) ONTO ROLLER BRACKETS.

6 SLIDE CD TRAYS (13) INTO RIGHT SIDE SLOTS AS SHOWN. INSERT DRAWER PINS (20) INTO HOLES TO PREVENT TRAYS FROM SLIDING OUT.

7 ATTACH GLASS CLIPS (23) TO PANELS USING PHILLIPS SCREWS (32). INSERT GLASS SPACERS (24) INTO HOLES IN METAL FRAMES. CAREFULLY PLACE GLASS TOP (1) ON SPACERS AND INTO GLASS CLIPS. ATTACH DOORS (14 AND 15) USING PHILLIPS SCREWS (30) AS SHOWN. INSERT WOODEN DOWELS (19) INTO HOLES IN DOORS AND ATTACH HANDLES (22) USING PHILLIPS BOLTS (27).

8 DESCRIPTION PARTS LIST QUANTITY 1. GLASS TOP 1 2. METAL FRAME - FRONT 1 3. METAL FRAME - REAR 1 4. PANEL - REAR 1 5. LEFT FRAME 1 6. RIGHT FRAME 1 7. MIDDLE PANEL 1 8. RIGHT PANEL 1

9 DESCRIPTION PARTS LIST QUANTITY 9. CROSSBRACE SLIDING SHELF - LARGE SLIDING SHELF - MEDIUM SLIDING SHELF - SMALL CD TRAY DOOR DOUBLE DOOR 1

10 DESCRIPTION PARTS LIST QUANTITY 16. CASTER - LOCKING CASTER - NON-LOCKING WOODEN DOWEL - LARGE WOODEN DOWEL - SMALL DRAWER PIN BOLT CONNECTOR KNOB GLASS CLIP GLASS SPACER 6

11 DESCRIPTION PARTS LIST QUANTITY 25. ALLEN BOLT - 1/4 X 2-1/ ALLEN BOLT - 1/4 X 1-1/ PHILLIPS BOLT - 3/16 X 3/ PHILLIPS SCREW - 5/32 X 5/ PHILLIPS SCREW - 3/16 X PHILLIPS SCREW - 3/16 X 5/ PHILLIPS SCREW - 3/16 X 1/ PHILLIPS SCREW - 3/16 X GLUE ALLEN WRENCH LIMITED WARRANTY Studio RTA warrants to the Original Purchaser that this product will be free from defects in its material and workmanship as described below. The company will repair or replace, at its option, without charge to the original purchaser only, defective products or parts during the following warranty periods. Ten (10) years or (Thirty (30) days on closeouts and discounted products) while owned by the Original Purchaser... Replacement parts can only be supplied if parts are available. Items out of production may be unavailable. This warranty shall be effective for the applicable time period beginning from date of purchase as shown on your original sales receipt. This warranty is your sole remedy for product defects and excludes defects due to or arising in connection with product abuse or misuse, use modification of, or attachments to the product, and products or parts not used, maintained, or installed in accordance with the company s installation, maintenance and/or applicable guidelines. There are no other warranties, express or implied other than those specifically described, including without limitation any implied warranty of merchantability or of fitness for a particular purpose. The company will not be responsible for incidental or consequential damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which may vary from state to state.the company will advise you of the procedure to follow in making warranty claims.telephone Studio RTA at (562) to explain the defect and give your name, address, and telephone number. Please be prepared with the model number of the product, date and place of purchase. If you require any assistance with assembly or parts please visit our website:

Installation Instructions HighRock 4x4 TM

Installation Instructions HighRock 4x4 TM Slider Step Vehicle Application: Jeep YJ and TJ Wrangler 1986 2006 Part Number: 49312 www.bestop.com - We re here to help! Visit our web site and click on Ask