BTH-820 Bluetooth Stereo Headset BTA-830 Bluetooth Stereo Audio Gateway

Transcription

1 Bluetooth Stereo Headset Bluetooth Stereo Audio Gateway User s Manual v2.3 Not only doest the Bluetooth Stereo Headset provides you the CD quality stereo sound, but also the freedom of wireless connectivity to your device. When used with your Bluetooth enabled mobile phone, if an incoming call occurs while you are listening to music transmitted from your Bluetooth enabled mobile phone, simply press any button on the to answer the call and the music will automatically stop playing and then resume after the call has ended. Bluetooth Stereo Audio Gateway enables most any audio device to take advantage of using wireless Bluetooth technology clearer, stereo sound. The transmits crystal clear digital audio to the (or any other compatible Bluetooth audio receiver) up to 10 meters away. Just plug the into the headphone jack of your favorite audio device (ipod, PDA, MP3 player, CD player, mobile phone or PC) and the digital audio will be transmitted to the paired Bluetooth Bluetooth headset. Features Press any button to receive a call. In the headset mode, you can adjust the volume and refuse to answer an incoming call. Answer a call while listening to music from your mobile phone, with music to resume once the call has ended. Built-in HOLD key and microphone A2DP+AVRCP Profile Control the PLAY, PAUSE, STOP, NEXT and PREVIOUS functions for Windows Media Player. Globalsat Supported Devices: BTA-806 BTA-804A A2DP Profile Control the PLAY / MUTE, VOLUME UP and VOLUME DOWN functions through the. Plug-and-Play Supports standard A2DP profile for clear stereo sound quality. Compatible with most portable CD players, MP3 player s, DVD players and other audio devices. Eliminates traditional wired headsets in exchange for Bluetooth wireless technology. Bluetooth offers exceptional digital sound quality in stereo as opposed to lower quality FM transmitters. Easy one-button operation Recharges quickly in only 3 hrs Bluetooth version compatibility: 1.1, 1.2 & 2.0 Operation range up to 32 (10M) line of sight Stand-by time up to 110 hours Embedded rechargeable Li-polymer batteries LED indicator for low power and charging status 1

2 Specification Model Name Product Description Bluetooth Stereo Headset Bluetooth Stereo Audio Gateway Color Availability Blue/White or Orange/White Blue or Orange Certification FCC, CE, BQB FCC, CE Bluetooth Version Bluetooth v1.2 Specification RF Output Power Class 2 Frequency Spread Spectrum Operating Range Sensitivity Band 2.4GHz ~ GHz unlicensed ISM band FHSS (Frequency Hopping Spread Spectrum) 32 feet (10M) line of sight Bluetooth Profile Headset,Handsfree,A2DP,AVRCP A2DP Stereo Audio Specification CD-Quality, 44.1, 48KHz 16-bit Stereo Audio Codec Standby Time Up to 110 hours Up to 110 hours Play Time Up to 6 hours Up to 7 hours Charging Time Up to 3 hours Up to 3 hours Talking Time Up to 6 hours -- Audio input Bluetooth signal 3.5 mm stereo plug Audio Output 3.5 mm stereo jack Bluetooth signal LED Indicator 2 LEDs (blue/red) Orange Ring: 2 LEDs (green/red) Blue Ring: 2 LEDs (blue/red) Battery Type Rechargeable Li-Polymer Operation Temperature 14 ~ 131 Degrees Fahrenheit (-10 ~ 55 C) Storage Temperature -4 ~ 140 Degrees Fahrenheit (-20 ~ 60 C) Humidity 10% ~ 90% non-condensing Dimensions 2.50 x 1.12 x 0.73 (63.5 x 28.5 x 18.5mm) Includes back clip 2.15 x 2.15 x 0.69 (54.5x54.5x17.5mm) Weight 0.67 oz. (19g) 1.02 oz (29g) Microphone Embedded microphone (To avoid ambient noise interference, please keep the microphone within 12 or 30 cm from your mouth while speaking.) N/A 2

3 Button Incoming call is ringing While on the phone While playing music/audio with BTA-806 (AVRCP, A2DP profile). While playing the music with (A2DP profile) Answer Transfers to phone mode Play / Pause Play / Mute Refuse the call Hang up Stop Mute Answer Volume up Volume Up Volume Up Answer Volume down Volume Down Volume Down Answer N/A Next N/A Answer N/A Previous N/A Lock the buttons Lock the buttons Lock the buttons Lock the buttons microphone -- (To avoid the noise interference, please put the microphone within cm from your mouth while talking.) Status (Blue/Orange) LED Indicator BTH-830 (Orange) BTH-830 (Blue) Standby Blue LED flash once Green LED flash once Blue LED flash once Connecting Blue LED flash twice Green LED flash twice Blue LED flash twice Transferring Blue LED flash four times Green LED flash four times Blue LED flash four times Pairing Blue and Red LED quickly alternate flashes. Green and Red LED quickly alternate flashes. Blue and Red LED quickly alternate flashes. Low battery Red LED is on Red LED is on Red LED is on Turn ON Press the power button for 2 seconds. Press the power button for 2. Turn OFF Press the power button for 4 seconds. Press the power button for 2 seconds. Pairing While in the off mode, press the power button for 6 seconds until the 2-color LEDs begin to alternately flash very quickly. This starts the search for other devices to pair with. 3

4 Charging Connect the mini-usb charging cable end(s) to the and/or and the other end to the USB port of your PC, or the USB socket of the included AC charger. The red LED will be remain on while in charging mode and will go off when the battery reaches a full charge. The and devices stop charging automatically when the battery reaches a full charge. Pairing Procedure To Pair Pairing Passkey with the Press the power button for 6 seconds, the 2-color LEDs will quickly alternate flashes and search each other for pairing. If correct pairing has occurred, the LED s will flash four times within 2 seconds. with another Bluetooth headset Set the and your Bluetooth headset into pairing mode. These two devices should pair automatically.. If correct pairing has occurred, the LED will flash four times within 2 seconds. with a Bluetooth mobile phone with a Bluetooth enabled PC Set the into Set the into pairing mode. From your pairing mode. Start mobile phone, enter the your Bluetooth Bluetooth menu and software(such as: IVT select Search Device. BlueSoleil or When your mobile phone Windcomm) on your finds the, select PC and select search it to complete the pairing device If correct process..if correct pairing has occurred, pairing has occurred, the you will be able to Red LED will be off and music/audio from your only Blue LED will flash. PC through the. N/A N/A Troubleshooting Check the battery power. Make sure the device(s) are turned on. Make sure the devices have been paired correctly. Make sure the devices are within the 32 (10 meter) range. Check the volume. Check to see if the audio source is correctly input. Rest and pair the devices again. Cannot connect the BTH-830 with my mobile phone: Delete the device from your mobile phone s Bluetooth Manager, reset and re-pair the devices again. Cannot turn the BTA-820/BTH-830 ON: Try performing a RESET by plugging in the mini-usb charging connector to the BTA-820 or BTH-830 power it up for 1 minute. Remove power cable. 4

5 WARRANTY THIS PRODUCT HAS BEEN DISCONTINUED AND CARRIES NO FACTORY WARRANTY FCC Notice Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/tv technician for help. FCC Caution: To assure continued compliance, (example use only shielded interface cables when connecting to computer or peripheral devices). Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 5