W E C O N V E Y Q U A L I T Y DISCHARGE SYSTEMS
|
|
- Sydney Norman
- 8 years ago
- Views:
Transcription
1 W E C O N V E Y Q U A L I T Y DISCARGE SYSTEMS
2 W E C O N V E Y ROTARY DISCARGE MACINE TYPE RDM-R The LOUISE Rotating Rotary Discharge Machine (RDM-R) is a central unit to extract difficult bulk material from a large capacity silo and large silo. The service platform rotates with the and the material will be d without building up material bridges. A conical roof is provided above the RDM-R in order to house the entire unit and to prevent uncontrolled outflow of the bulk material (flushing). The RDM-R is accessible either via the chute or by a maintenance way through one of the cone supports. It can be maintained completely inside the conical roof. ADVANTAGES OF LOUISE RDM-R First in First out Simultaneous feeding and discharging Vertical silo walls up to 12 m 6 arms low torque to each arm Maintenance with full silo possible For every sticky and poor flowing material Discharge capacity infinitely adjustable For capacities up to 3,000 m 3 /h Low power demand Easy access The consists of a central steel hub to which six (6) curved steel arms are affixed. The front of the arms is lined with a wear resistant steel plate and additionally the tip of the arms is hard faced. The bottom of the arms is equipped with three scraper pins, which are also hard welded, for cleaning of the silo table. Discharge with exchangeable arms 2
3 Q U A L I T Y ROTARY DISCARGE MACINE TYPE RDM-R Rotating Rotary Discharge Machine type RDM-R silo cone floor ring opening concrete floor opening incl. undercut max. protrusion of cone girder opening height penetration depth theoretical capacity Q (m 3 /h) with speed n (rpm) range 1:10 circular speed at tip D1 DR D2 D3 D4 D5 A P u = 0.3 (m/s) u = 3.0 (m/s) (1.67) 247 (1.27) 247 (1.27) 247 (1.27) 1550 (16.7) 2470 (12.7) 2470 (12.7) 2470 (12.7) 3
4 W E C O N V E Y ROTARY DISCARGE MACINES For a variety of applications wherever difficult bulk material needs to be d from Rectangular hoppers Open stockpiles Large cylindrical silos All LOUISE Rotary Discharge Machines feature the logarithmically shaped arms and automatic operation including reverse travel. Three basic alternatives: Block Model type RDM-BL Low Profile Model type RDM-LP Rotating Model type-rdm-r Rotary Discharge Machine - Block Model cc rails width cone-shaped height rail to tunnel hopper shelf height hopper shelf - belt feeder theoretical capacity Q (m 3 /h) with speed n (rpm) range 1:10 circular speed at tip max. admissible travel speed DR P S B Z T U = 0.3 U = 3.0 V (2.9) 940 (29) (2.28) 1380 (22.8) (1.91) 2250 (19.1) (1.63) 3020 (16.3) (1.43) 4100 (14.3) (1.27) 4950 (12.7) (1.14) 5800 (11.4) 4
5 Q U A L I T Y Rotary Discharge Machine type RDM-BL Data sheet Rotary Discharge Machine type RDM-LP Data sheet Rotary Discharge Machine - Low Profile Model theoretical capacity Q (m 3 /h) Discharge height height rail with a speed n (rpm) max. max. opening penetration hopper to belt range 1:10 admissible admissible height depth overall width overall height track displacement shelf to rail conveyor circular speed at tip grain size travel speed DR P B O V X Z T U = 0.3 DR K V (2.9) 470 (29) (2.28) 690 (22.8) (1.91) 1120 (19.1) (1.63) 1510 (16.3) (1.43) 2050 (14.3) 120 5
6 W E C O N V E Y CENTREX The LOUISE CENTREX is used for trouble-free silo for sticky and cohesive materials with poor flow properties. The logarithmically shaped arm moves the bulk material toward the central outlet underneath the inner cone, where it is d into a chute. The arm attacks the material underneath the material column and reaches beyond the outlines of the silo wall, which avoids accumulations and prevents the bulk material from sticking to the silo wall, thus avoiding bridging. Three basic alternatives are available with the CENTREX system. The choice depends either on the technical features of the bulk material or on the type of application within a given process. CENTREX with internal drive. Discharge from a steel plate silo with truck loading. View through the hollow girder onto the drive unit. A CENTREX with internal drive can be of shockproof or entirely pressure and water-proof design. It is therefore particularly suitable for: Feeding of mills, dryers and kilns Sludge from sediment retention basins Discharge from silos operating with inert gas Discharge from silos with poisonous materials Three basic alternatives: CENTREX with internal drive type CTX-IV CENTREX with external drive and stationary inner cone type CTX-AV CENTREX with external drive and rotating inner cone type CTX-AFD CENTREX with internal drive type CTX-IV CENTREX with external drive and stationary inner cone type CTX-AV CENTREX with external drive and rotating inner cone type CTX-AFD 6
7 Q U A L I T Y CENTREX with internal drive type CTX-IV Data sheet CENTREX with external drive type CTX-AFD Data sheet E D d E D d A F A F CENTREX with internal drive: minimum 2,500 mm, below 2,500mm external drive is recommended. CENTREX with external drive and rotating cone: max. : 5,000 mm. D F E d A Q [m 3 /h] Discharge Outer ø Penetra- Inner Slot Outlet Theoretical capacity arm ø tion depth cone ø height ø Circular speed at [mm] [mm] [mm] [mm] [mm] [mm] arm tip (adjustable) 1 m/s 0.5 m/s 0.2 m/s by AUMUND Fördertechnik Gmb All rights reserved. Neither this document nor any part of it may be reproduced or stored, processed, duplicated of circulated e.g. by using electronic systems in any form or by any means without the prior authorisation of AUMUND Fördertechnik Gmb. In case of infringements the infringing party will be obliged to compensate for all damages incurred. 7
8 Workshop assembly of RDM-R Two CENTREX for FGD-gypsum GB Technical data subject to change without notice S-GB-003-III/06-MA SCADE Lagertechnik Gmb & Co.KG. Dorstener Straße erne (Germany) Tel.: Fax:
Silo Discharge CENTREX
W E C O N V E Y Q U A L I T Y Silo Discharge CENTREX Content 3 CENTREX with Internal Drive Type CTX-IV 4 CENTREX with External Drive and Stationary Inner Cone Type CTX-AV 5 CENTREX with External Drive
More informationManual piston sampler...m 11
SAMPLING Manual piston sampler...m 11 Screw sampler...prec 22...PREC 100 Slide sampler...pr 55 Rotative screw sampler...prv Piston sampler...p 11 Sampler on belt conveyor...pba Rotating cup sampler...pgr
More informationBatching and Mixing Plants
Batching and Mixing Plants Technique Strength Results Ready-mix plant with sheeted, square steel in-line bins. Precast and pipe factory with concrete in-line bins and bucket elevator. Individual solutions
More informationHOBBING MACHINE TYPE ZFWZ 8000x40
Inventory number 416/635 Year of production 1973 Serial number 7160 HOBBING MACHINE TYPE ZFWZ 8000x40 Application The machine is provided for milling cylindrical, helical and helix cogwheels. The tooth
More informationI BAU HAMBURG Dry Product Handling
IBAU HAMBURG Your efficient partner for modern and effective bulk material handling I BAU HAMBURG PLANT DESIGN - ENGINEERING - EPC-CONTRACTING CEMENT - THERMAL POWER - MINERALS Central Cone Silos Single
More informationStorage and Handling Requirements for Biomass. Richard Farnish, CEng MIMechE
Storage and Handling Requirements for Biomass Richard Farnish, CEng MIMechE Storage and Handling Requirements for Biomass The storage and handling of biomass materials need not present major problems if
More informationStacker and reclaimer systems for cement plants
Stacker and reclaimer systems for cement plants 2 Heavy-duty performance Key benefits All stacker and reclaimer systems are: - Ideal for both prehomogenisation and buffer storage - Designed for heavy-duty
More informationAfter close to 50 years working with an unloading
NEUERO Continuous Ship Unloader for Feed Mill TOMAS KISSLINGER, NEUERO Industrietechnik, Germany A BSTRACT After close to 50 years working with an unloading system, a new system which would serve today
More informationFixturing systems Fixturing systems for measurement technology
Fixturing systems Fixturing systems for measurement technology Innovations and new additions to range Sets Spannfix Eco complete set The set contains different supports, extension elements and stop units.
More informationMachine tools. Milling- and boring machines
Milling- and boring machines Milling- and boring machines Our family owned company develops and manufactures customized machines and designs machine tools based on work piece requirements successfully
More informationVZ/VZM SERIES Heavy Duty Shredders 600-2,100 kg/h
VZ/VZM SERIES Heavy Duty Shredders 600-2,100 kg/h Technical Specifications VZ/VZM SERIES Heavy Duty Shredders VZ 17.00 / VZ 18.00 Inline set-up VZM 17.00 / VZM 18.00 Inline set-up Technical Data VZ/VZM
More informationCOIL PAC. Subec AB, Sprängarvägen 16, 132 38 Saltsjö-Boo, Sweden, Tel.: +46 8 884633, Fax: +46 8 977658, e-mail: info@subec.se
COIL PAC Subec AB, Sprängarvägen 16, 132 38 Saltsjö-Boo, Sweden, Tel.: +46 8 884633, Fax: +46 8 977658, e-mail: info@subec.se Description of the machine Coil Pac 240 und Coil Pac 400 are two types of
More informationTitan Makina Ltd. Şti. 1160. Sok. No: 9 Ostim 06370 Ankara Tel: + 90 312 354 9977 Fax: + 90 312 385 5611 Web: www.titanltd.com.
IS26 Concrete Spraying Machine IS26 Concrete Spraying Machine TECHNICAL SPECIFICATIONS Manipulator Max. vertical spraying reach : Max. horizontal spraying reach : Working lights : Spraying Head Rotation
More informationSafe use of vertical spindle moulding machines
HSE information sheet Safe use of vertical spindle moulding machines Woodworking Information Sheet No 18 (Revised) Introduction This information sheet is one of a series prepared by HSE's Woodworking National
More informationINTELLIGENT. belt CLEANING BELT CLEANING SOLUTIONS
INTELLIGENT belt CLEANING BELT CLEANING SOLUTIONS BELT CLEANING saves MONEY Carryback is the problem confronted by the material handling industry where product is transported by belt conveyors. working
More information[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining
[ E[M]CONOMY] means: Save time, money and space! MAXXMILL 500 Vertical milling center for 5-side machining MAXXMILL 500 MAXXMILL 500 is the ideal vertical milling center for the for the 5-axis operation
More information19" Data Racks. Adjustable feet To compensate for uneven floors and assure great stability all feet can be up to 20 mm adjusted.
19" Data Racks Attractive design and high quality are characteristic. Basic framework is welded from multiple bent metal plate, which assures great rigidity suitable for heavier equipment. All profile
More informationAMS 120. EFT Guest Card Terminal & Refund unit
AMS 120 EFT Guest Card Terminal & Refund unit ACCOUNT MANAGEMENT STATIONS Wall mounted kiosk offering Visitor card purchase and refund Card deposit EFT purchase, refund and loading Full statement facilities
More informationHome"" """"> ar.cn.de.en.es.fr.id.it.ph.po.ru.sw
Home"" """"> ar.cn.de.en.es.fr.id.it.ph.po.ru.sw Milling of Grooves, Elongated Slots and Break-throughs - Course: Techniques for machining of material. Trainees' handbook of lessons (Institut fr Berufliche
More informationGrit Removal Systems Simple, low cost, effective grit removal to enhance plant performance
LAKESIDE Water Purification Since 1928 Bulletin #1603 April 2005 Grit Removal Systems Simple, low cost, effective grit removal to enhance plant performance Aeroductor Model L Grit Classifier SpiraGrit
More informationSaferand easierinstallation
EN 85-07 Saferand easierinstallation IföSigninstallationsystem andifösignbuilt-incistern www.ifosanitar.com/sign Aneffectivesolution withmanyadvantages. Ifö Sign installation system makes life a little
More informationCONVEYING TECHNOLOGY LOADING TECHNOLOGY PALLETIZING TECHNOLOGY PACKAGING TECHNOLOGY SORTATION AND DISTRIBUTION SYSTEMS
CONVEYING TECHNOLOGY LOADING TECHNOLOGY PALLETIZING TECHNOLOGY PACKAGING TECHNOLOGY SORTATION AND DISTRIBUTION SYSTEMS High capacity chain bucket elevators BEUMER CONVEYING TECHNOLOGY Bucket elevators
More informationTechnical handbook Panel Anchoring System
1 Basic principles of sandwich panels 3 Design conditions 4 Basic placement of anchors and pins 9 Large elements (muliple rows) 10 Small elements (two rows) 10 Turned elements 10 Slender elements 10 Cantilevering
More informationMATHEMATICS FOR ENGINEERING BASIC ALGEBRA
MATHEMATICS FOR ENGINEERING BASIC ALGEBRA TUTORIAL 4 AREAS AND VOLUMES This is the one of a series of basic tutorials in mathematics aimed at beginners or anyone wanting to refresh themselves on fundamentals.
More informationWorldwide network in over 40 countries.
Worldwide network in over 40 countries. April 2012 56 rue de Neuilly 93136 Noisy le Sec Cedex - France Tel : +33 (0)1 49 42 72 95 Fax : +33 (0)1 48 44 00 02 E-mail : contact@ptc.fayat.com PTC s vibrodrivers
More information1300 MAXTRAK SPECIFICATION
CONE CRUSHER Crusher type: Liners: Standard concave: Lubrication: Adjustment: Control: Concave options: 1300 Automax Crusher. Manganese steel alloy mantle and concave. Medium Coarse. Pumped system having
More informationTOWER BETON - VERTICAL BATCHING AND MIXING PLANTS CONCRETE BATCHING PLANTS
TOWER BETON - VERTICAL BATCHING AND MIXING PLANTS CONCRETE BATCHING PLANTS TOWER BETON Meeting the demands of customers needs and applying the most modern technology is what SIMEM focused on while designing
More informationTunnels & Arches OLDROYD THE ULTIMATE WATERPROOF MEMBRANE SYSTEM
P r o d u c t a p p l i c a t i o n s a n d t e c h n i c a l i n f o r m a t i o n 5 Tunnels & Arches V OLDROYD THE ULTIMATE WATERPROOF MEMBRANE SYSTEM V Create dry usable space with the original X pattern
More informationSpetec. Laminar Flow Box. Portable Clean Room Technology
Spetec Laminar Flow Box Portable Clean Room Technology 1 Fundamentals Portable Clean Room Technology Laminar Flow The basis for the development of the clean room technology was first established in the
More informationCONTACT WELDING UNITS. D1Q, D2Q, D3Q Quickchange Silver graphite contact welding unit
CONTACT WELDING UNITS D1Q, D2Q, D3Q Quickchange Silver graphite contact welding unit CONTACT WELDING UNITS for industrial switchgear Ultra productive process modules Bihler contact welding units are designed
More informationDMU 75 / 95 monoblock
www.dmgmori.com Five-axis universal milling machines DMU 75 / 95 monoblock High tech as standard Five-axis simultaneous machining at the best price. DMU 75 / 95 monoblock Top features for five-axis simultaneous
More informationStandard Sleep Pod Side Entry Assembly Instructions
Standard Sleep Pod Side Entry Assembly Instructions www.podtime.co.uk enquiries@podtime.co.uk Working House Ltd How to assemble your pod Pod assembly onsite is a relatively simple exercise for two people
More informationBelt Conveyor System
Belt Driven Conveyors the cost effective solution for transporting unit loads. Systems Handling Services range of powered belt conveyors is designed for applications where improved load control and speed
More informationConveying Systems. Efficient and reliable.
Conveying Systems. Efficient and reliable. High-performance technology. Innovative solutions. Grain terminal Grain collection point Reliable high-performance conveying systems are a key contributor to
More information6 Design of Gates. 6.1 The Sprue Gate
6 Design of Gates 6.1 The Sprue Gate The sprue gate is the simplest and oldest kind of gate. It has a circular cross-section, is slightly tapered, and merges with its largest cross-section into the part.
More informationGuide rail bracket (for adjustable heads)
(for adjustable heads) Part. 209 40 ø,5 ø10,5 2 2,5 115 15 42 5 11 37 72 4 70 Code 209 / 0754 MATERIALS: Bracket made out of reinforced polyamide black colour. FEATURES: To be used with heads Part.221,
More informationProduct Data Sheets. Belt Conveyor System
Product Data Sheets Belt Conveyor System Belt Conveyor System Belt Driven Conveyors the cost effective solution for transporting unit loads. Texam Limited s range of powered belt conveyors is designed
More informationModel No. 4 Vertical Mixer 9 Screw Feeder Inlet 69196-H15400, May 1999 (#72-200-60-12)
The Model Number 4 Kelly Duplex Vertical Mixer has a gross vessel capacity of 200 cubic feet and a nominal batch working capacity of 170 cubic feet. This mixer features a 60 degree cone, a 12 inch diameter
More informationCEEN 162 - Geotechnical Engineering Laboratory Session 7 - Direct Shear and Unconfined Compression Tests
PURPOSE: The parameters of the shear strength relationship provide a means of evaluating the load carrying capacity of soils, stability of slopes, and pile capacity. The direct shear test is one of the
More informationKeiler 2 GB. Superior class.
Keiler 2 GB Superior class. Stepless hydraulically driven disc coulter Single row pickup (lanes) is possible Individually adjustable depth guidance of each ridge row Fully automatic ROPA ridge pressure
More informationVOLUME AND SURFACE AREAS OF SOLIDS
VOLUME AND SURFACE AREAS OF SOLIDS Q.1. Find the total surface area and volume of a rectangular solid (cuboid) measuring 1 m by 50 cm by 0.5 m. 50 1 Ans. Length of cuboid l = 1 m, Breadth of cuboid, b
More informationRobot Welding Torch System
T e C H N O L O G y f O R T H e W e L d e R s W O R L d. Robot Welding Torch System W W Robot welding torch system... The universal MIG/MAG-torch system for robot welding: A new interface and cable assembly
More informationOriginal Assembly Guide
TCT Multipurpose Single Bevel Sliding Compound Mitre Saw Original Assembly Guide Read instructions before assembling this tool. Table of Contents GB Assembly Guide Read instructions before assembling this
More informationFLOTTWEG CENTRIFUGE TECHNOLOGY FOR THE EXTRACTION OF AVOCADO OIL Satisfying Customer Needs by Using High Quality Separation Technology
FLOTTWEG CENTRIFUGE TECHNOLOGY FOR THE EXTRACTION OF AVOCADO OIL Satisfying Customer Needs by Using High Quality Separation Technology FLOTTWEG TECHNOLOGY FOR THE PRODUCTION OF AVOCADO OIL Efficient Centrifuge
More informationCold milling machine W 1000 F. Technical specification
Cold milling machine W 1000 F Technical specification Technical specification 2 Cold milling machine W 1000 F on four wheels Cold milling machine W 1000 F on four crawler tracks Milling width max. mm 1,000
More informationULTRA 865HD HIGH PERFORMANCE MULTI PURPOSE GREASE
ULTRA 865HD HIGH PERFORMANCE MULTI PURPOSE GREASE Contains penetrants, lubricants and greases All weather Water-resistant Penetrates like an oil, then cures to a thick, water-resistant grease Recommended
More informationFAG Induction Heating Devices HEATER. Quality and Safety Redefined
FAG Induction Heating Devices HEATER Quality and Safety Redefined The New HEATER Generation Quality and safety redefined! With the new FAG induction heating devices from the HEATER series, Schaeffler is
More informationShower and Floor Gullies Channel Drain and Tile Drain SECTION
Shower and Floor Gullies Channel Drain and Tile Drain SECTION 2 Shower and Floor Gullies, Channel Drain and Tile Drain 29 General Information Shower and Floor Gullies McAlpine has responded to market conditions
More informationSTORAGE SYSTEMS PUSH BACK RACK SYSTEMS. Innovative Solutions for Storage and Material Handling Systems
STORAGE SYSTEMS PUSH BACK RACK SYSTEMS Innovative Solutions for Storage and Material Handling Systems Konstant.com PUSH BACK OVERVIEW Konstant patented Push Pack rack system provides selectivity in the
More informationABOUT CWB CERTIFICATION/ QUALIFICATION The work CWB does on behalf of our clients can be divided into five main categories:
CWB CERTIFICATION/ CWB CERTIFICATION/ QUALIFICATION QUALIFICATION SERVICES SERVICES CANADIAN WELDING CERTIFICATION AN OVERVIEW Canada, like many countries around the world, has specific rules and regulations
More informationWIBObarrier OCS - Open Containment Systems WIBObarrier CCS - Closed Containment Systems
WIBOjekt and WIBObarrier Air Curtain Systems. The perfect protection for person, product and environment. Filling Weighing Sampling Research Safe handling with high potent products / API WIBObarrier OCS
More informationKWANG SING ENGINEERING PTE LTD
KWANG SING ENGINEERING PTE LTD 1. INTRODUCTION This report represents the soil investigation works at Aljunied Road / Geylang East Central. The objective of the soil investigation is to obtain soil parameters
More informationheat treatment equipment & accessories
heat treatment equipment & accessories INDUSTRIAL FURNACES Dear Customer, ElectroHeat Sweden AB is an innovative company based in Gothenburg, Sweden, and has been operating since 1975. We manufacture industrial
More informationFIBER OPENING AND BLENDING. AUTEFA Solutions leads the way
FIBER OPENING AND BLENDING AUTEFA Solutions leads the way AUTEFA SOLUTIONS Experience, Know-How and Competence in Nonwoven Technology AUTEFA Solutions leads the way AUTEFA Solutions represents companies
More informationPrecise heavy-duty cutting
PR 130 / PR 150 / PR 160 / PR 180 / PR 200 / PR 260 Precise heavy-duty cutting P-SERIES K-SERIES T-SERIES MILLFORCE 02 / Fields of application 03 / Machine concept 04 / Machine technology 05 / Options
More informationIntroduction to Beam. Area Moments of Inertia, Deflection, and Volumes of Beams
Introduction to Beam Theory Area Moments of Inertia, Deflection, and Volumes of Beams Horizontal structural member used to support horizontal loads such as floors, roofs, and decks. Types of beam loads
More informationCONCRETE PIPES AND MANHOLES
Concrete Plant International www.cpi-worldwide.com AUGUST 20072 CONCRETE PIPES AND MANHOLES Texas-Size Pipe Plant Installed At Hanson Pipe and Precast SPECIAL PRINT CPI 07/02 The Hawkeye Group, Mediapolis
More informationSelector Switch Type 08
Compact and versatile 2 positions multi wafer selector switch For PCB mounting 25,000 switching cycles with up to 9.0 Ncm switching torque Gold plated contacts: micron Robust metal housing with metal shaft
More informationInvestigation of the Performance Characteristics of a Rotary Electronic Tablet Counter
Proceedings of the 2014 International Conference on Industrial Engineering and Operations Management Bali, Indonesia, January 7 9, 2014 Investigation of the Performance Characteristics of a Rotary Electronic
More informationHCW 1000 NEW TYPE OF LIGHT MACHINE FROM SKODA
HCW 1000 NEW TYPE OF LIGHT MACHINE FROM SKODA INTRODUCTION HCW 1000 ŠKODA MACHINE TOOL a.s. continues its more than 100 years old tradition of high-precision machine tool manufacturing. Based on market
More informationIES <Virtual Environment> Tutorial. ModelIT (Version 6.0)
IES Tutorial ModelIT (Version 6.0) 1 Introduction: ModelIT Tutorial This document shows you how to use ModelIT, IES s 3D building geometry modelling tool. The tutorial is intended
More informationRouters and machining centres
Routers and machining centres Safe working practices HSE information sheet Introduction This information sheet gives practical guidance on safe working practices when using CNC routers and machining centres,
More informationTool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014. 0414/Rö
Tool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014 0414/Rö Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors
More informationPractice Problems on Boundary Layers. Answer(s): D = 107 N D = 152 N. C. Wassgren, Purdue University Page 1 of 17 Last Updated: 2010 Nov 22
BL_01 A thin flat plate 55 by 110 cm is immersed in a 6 m/s stream of SAE 10 oil at 20 C. Compute the total skin friction drag if the stream is parallel to (a) the long side and (b) the short side. D =
More informationReduced depth High Density Cabinet HDC with 19 swing frame 36, 40 and 45 U
Reduced depth High Density Cabinet HDC with 19 swing frame 36, 40 and 45 U Applications The High Density Cabinets are suitable for Central Offices and can be used as fiber nodes and termination points
More informationInterior Walls below and above ground OLDROYD THE ULTIMATE WATERPROOF MEMBRANE SYSTEM
P r o d u c t a p p l i c a t i o n s a n d t e c h n i c a l i n f o r m a t i o n 2 below and above ground V OLDROYD THE ULTIMATE WATERPROOF MEMBRANE SYSTEM V The flexible, fast and cost-effective answer
More informationCopyright 1999 Society of Manufacturing Engineers. FUNDAMENTAL MANUFACTURING PROCESSES Die Casting NARRATION (VO): UTILIZED. NARRATION (VO): THE DIE.
FUNDAMENTAL MANUFACTURING PROCESSES Die Casting SCENE 1. CG: Die Casting Machines white text centered on black SCENE 2. tape 445, 12:06:10-12:06:19 zoom out, horizontal die casting machines tape 443, 09:11:47-09:11:55
More informationFredriksons conveyor systems handle goods with a width from 20 mm up to 600 mm.
Conveyor Solutions Whatever your logistic needs, we can offer a conveyor solution. Our flexible systems primary and secondary packaging for single and multi packages, can transport your goods from one
More informationRack installation instructions
Rack installation instructions Review the documentation that comes with the rack cabinet for safety and cabling information. Before you install the server in a rack cabinet, review the following guidelines:
More informationSELECTING THE ELECTRIC VIBRATOR
SELECTING THE ELECTRIC VIBRATOR Vibration systems and methods The systems that use the vibration technique can be divided into the following categories: freely oscillating systems, which will be described
More informationINSITU TESTS! Shear Vanes! Shear Vanes! Shear Vane Test! Sensitive Soils! Insitu testing is used for two reasons:!
In-situ Testing! Insitu Testing! Insitu testing is used for two reasons:! To allow the determination of shear strength or penetration resistance or permeability of soils that would be difficult or impossible
More informationFixed ladders. Fixed ladders. Shaft ladders
Fixed ladders Fixed ladders Fixed ladders are perfect to provide safe and permanent access to buildings, equipment or machines also at great heights, e.g.: + + Ascent for inspection and maintenance work
More informationELECTRIC PERISTALTIC MORTAR POINTING PUMP
ELECTRIC PERISTALTIC MORTAR POINTING PUMP pointing gun & control valve ACF405 PERISTALTIC PuMP hopper feed roller & tube pump for refurbishment & repair trades heritage & conservation bridge & underground
More informationBLASTING SYSTEMS. Turbine blasting systems. Air blasting systems. Automatic Painting plants
BLASTING SYSTEMS Turbine blasting systems Air blasting systems Automatic Painting plants 1, Dust Collector 2, Cyclone Separator 3, Sand (shot) Storage Hopper 4, Bucket elevator 5, Primary separator 6,
More informationSUPER 600. Tracked Paver SUPER 600. Pave Widths 0.5m 2.7m. Maximum Laydown Rate 200 tonnes/h. Clearance Width 1.2m
SUPER 600 Tracked Paver SUPER 600 Pave Widths 0.5m 2.7m Maximum Laydown Rate 200 tonnes/h Clearance Width 1.2m Mini Paver for Maximum Efficiency on Minor Job Sites T hanks to its compact size, variable
More informationFire Preventive and Fireproof Performance Test and Evaluation Procedure Manual
BR BO-01-02 Effective from June 1, 2000 Revision: March 26, 2002 Fire Preventive and Fireproof Performance Test and Evaluation Procedure Manual (Unofficial Manual) Technical Appraisal Department, Building
More informationGEK-90214B. GE Lift Truck. User s Guide 144D2933G1 144D2912G1 144D2911G5
g GEK-90214B GE Lift Truck User s Guide 144D2933G1 144D2912G1 144D2911G5 GE LIFT TRUCK EACH USER HAS THE RESPONSIBILITY TO INSTRUCT ALL PERSONNEL ASSOCIATED WITH THIS EQUIPMENT ON ALL SAFETY PRECAUTIONS
More informationTruLaser Tube: Optimal tube. and. profile cutting. Machine Tools / Power Tools Laser Technology / Electronics Medical Technology
TruLaser Tube: Optimal tube and profile cutting Machine Tools / Power Tools Laser Technology / Electronics Medical Technology Giving you the edge in laser tube processing. The TRUMPF Group ranks among
More informationCNC Portal Milling Machine FZ 50. CNC Power Milling Technology
CNC Portal Milling Machine FZ 5 CNC Power Milling Technology FZ 5 Portal Milling Machine for Heavy Cutting The newly developed portal milling machine FZ 5 is based on a flexible machine design which can
More informationINDUSTRIAL PLANTS, COMPUTER & MACHINERY Manufacturing & Trade Co.Ltd.
INDUSTRIAL PLANTS, COMPUTER & MACHINERY Manufacturing & Trade Co.Ltd. Reference list: 2013 1 1. CNL Cimento Nacional LDA Maputo - Mozambik Project Definition : Capacity increasing the existing plant as
More informationIP40 or IP64 (EN 60529) Protection class housing. IP50 (IP65 optional) (EN 60529) Minimum length of mountig
Through hollow shaft Ø 5 bis 4 mm Outside diameter only 76 mm Easy installation by means of clamping ring front or rear Operating temperature up to 00 C Applications: motors, printing machines, lifts NUMBER
More informationEurovacuum EV Series. Single Stage Oil Sealed Rotary Vane Pump
Eurovacuum EV Series Single Stage Oil Sealed Rotary Vane Pump Eurovacuum EV Series Single Stage Oil Sealed Rotary Vane Pumps Eurovacuum Company is offering its various products to meet industrial vacuum
More informationMachine needle shut-off nozzle type-a
Machine needle shut-off nozzle type-a spring operated Applications: Thermoplastics (not applicable for PVC) Shut-off mechanism: Operated with one axial high performance spring Index of contents Chapter
More informationPresentation of. factory at Segmon, Grums municipal.
Presentation of factory at Segmon, Grums municipal. Office building Office building Office building Storehouse Space for annex Preparatory work with plinths for the extension of sheet metal building by
More informationAESCO/MADSEN. Self-Erect Silos by AESCO/MADSEN
AESCO/MADSEN Self-Erect Silos by AESCO/MADSEN AESCO/MADSEN manufactures two self-erecting silos called the WM-Series. The WM-50 has a 50-ton silo and the WM-80 has an 80-ton. The WM Series comes complete
More informationLecture slides on rolling By: Dr H N Dhakal Lecturer in Mechanical and Marine Engineering, School of Engineering, University of Plymouth
Lecture slides on rolling By: Dr H N Dhakal Lecturer in Mechanical and Marine Engineering, School of Engineering, University of Plymouth Bulk deformation forming (rolling) Rolling is the process of reducing
More informationINSTALLATION INSTRUCTIONS for Bifold Doors (JII103)
Thank you for selecting JELD-WEN products. Attached are JELD-WEN s recommended installation instructions for premium composite, hollow and solid core molded Bifold Doors. Bifolds are designed for fast
More informationProcessing Centers. Vantage 13/15. Nest & More
Processing Centers Vantage 13/15 Nest & More Vantage 13 and Vantage 15 With their heavy-duty machine bed and highly rigid extension arms, the Vantage 13 and 15 processing centers offer the ideal basis
More informationSpeed-Mat Rectangle Cutter
Speed-Mat Rectangle Cutter 1 Honeycomb baseboard. 2 Left hold down. 14 3 Bottom hold down. 4 4 Left / right rule. 8 5 8 5 Left / right rule pointer. 1 6 Top / bottom rule. 7 Top / bottom rule pointer.
More informationOptimising plate girder design
Optimising plate girder design NSCC29 R. Abspoel 1 1 Division of structural engineering, Delft University of Technology, Delft, The Netherlands ABSTRACT: In the design of steel plate girders a high degree
More informationEfficiency on a large scale CFB Steam Boilers
Efficiency on a large scale CFB Steam Boilers Circulating Fluidized Bed Steam Boiler The Circulating Fluidized Bed Steam Boiler is an offering from Bosch Thermotechnology a member of the worldwide Bosch
More informationFree Stall Cleaner System with Cable. A new generation of equipment and systems. GEA Farm Equipment Houle
Free Stall Cleaner System with Cable A new generation of equipment and systems GEA Farm Equipment Houle engineering for a better world GEA Farm Technologies SW Series Cable Drive Unit A new series of cable
More informationMAY WE HELP YOU BUNDLE YOUR PRODUCTS?
BUNDLING MACHINES MAY WE HELP YOU BUNDLE YOUR PRODUCTS? BP-700-CVS (+KT-1200) AVC Sealing Solutions is a dynamic company with many years of experience and a clear ambition: to be the best in our market.
More informationWalking and Working Surface Checklist:
Walking and Working Surfaces Purpose: This information is presented to improve the level of safety in our operations, and to inform you that we will comply with the OSHA Standard 29 CFR 1910.23. Responsibility:
More informationUNIVERSAL CLEANERS. Seed Conditioning And Processing Global Solution UNIVERSAL 240
UNIVERSAL CLEANERS Seed Conditioning And Processing Global Solution UNIVERSAL 240 UNIVERSAL EXCELLPRE CLEANERS High Effective Pre-cleaning Performance Akyurek Technology develops and manufactures solutions
More informationBringing good things ahead
Bringing good things ahead Whatever your logistic needs, we can offer a conveyor solution. Our flexible systems primary and secondary packaging for single and multi packages, can transport your goods from
More information19 DYNAmax Free Standing Server C A B I N E T s
9 DYNAmax Free Standing Server C A B I N E T s 9 DYNAmax Free Standing Server Cabinets FAMILY W=600mm and W=800mm DYNAmax Series Free Standing Server Cabinets DYNAmax series Servering Enclosures, provide
More informationIntroduction. Example of inverted cone silos
Storage Silos 2 3 Introduction FLSmidth Ventomatic offers technologies in the fields of material handling, storage, packing and dispatching with particular experience and focus in the cement, fertilizers,
More informationCHAPTER 2 INJECTION MOULDING PROCESS
CHAPTER 2 INJECTION MOULDING PROCESS Injection moulding is the most widely used polymeric fabrication process. It evolved from metal die casting, however, unlike molten metals, polymer melts have a high
More information301.7D. Mini Hydraulic Excavator
301.7D Mini Hydraulic Excavator Engine Weights Gross Power (ISO 14396) 17.9 kw 24.3 hp Operating Weight with Canopy 1610 kg 3,550 lb Net Power 13.2 kw 17.7 hp Operating Weight with Cab 1720 kg 3,792 lb
More information