Pipe Fittings.
|
|
- Christian Kelly
- 7 years ago
- Views:
Transcription
1 Pipe Fittings 10# THREADED FITTINGS... STAINLESS STEEL NIPPLES...7 PIPE THREADS... FORGED, THREADED & SOCKET WELD FITTINGS...91 SWAGE NIPPLES...11 FORGED STEEL BRANCH OUTLET FITTINGS BRANCH CONNECTIONS...1 BUTT WELD FITTINGS...1 1
2 STAINLESS STEEL 10# THREADED FITTINGS 90 ELBOW ELBOW STREET ELBOW TEE A B Approx. Weight in Pounds A B Approx. Weight in Pounds A B Approx. Weight in Pounds A B L Approx. Weight in Pounds 1/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Dimensions for Reference only
3 STAINLESS STEEL 10# THREADED FITTINGS CROSS HOSE NIPPLE ROUND CAP A B 1/ / 1/ / / / / 1/ 0.01 / / / / / 1/ 0.0 1/ / / / 7/ / 0.0 / / / / 11/ 9/ / / / / / / 1/ 11/ / / / / 11/1 / / 1/1 1. 1/... 1/ / / 7/ 1/ / 11/ / / 11/.0 A B L Approx. Weight in Pounds / COUNTERSUNK HEX PLUG Approx. Weight in Pounds A B L Approx. Weight in Pounds A B Approx. Weight in Pounds / / 9/ 0.01 Dimensions for Reference only
4 STAINLESS STEEL 10# THREADED FITTINGS HEX BUSHINGS HEX BUSHINGS SQUARE HEAD PLUG A B Approx. Weight in Pounds A B Approx. Weight in Pounds L L1 L S Approx. Weight in Pounds 1/ X 1/ / X 1/ / X 1/ / X 1/ / X 1/ / X / / X 1/ / X 1/ / X / / X 1/ X 1/ X / X 1/ X / / X 1/ / X / / X / X 1/ / X / / X / X 11/ X / X X 1/ X 11/ / X / X 11/ / X 11/ / X X X 11/ X 11/ X X 1/ X 11/ / / / / / / / / Dimensions for Reference only
5 STAINLESS STEEL 10# THREADED FITTINGS HEX. HEAD PLUG UNION F/F COUPLING L H W 1/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / A B. W L Approx. Weight in Pounds L HALF COUPLING Approx. Weight in Pounds øw Approx. Weight in Pounds L W Approx. Weight in Pounds Dimensions for Reference only
6 STAINLESS STEEL 10# THREADED FITTINGS RED. COUPLING RED. COUPLING ø L H ø W Approx. Weight in Pounds ø L H ø W Approx. Weight in Pounds / X 1/ / X 1/ / X 1/ / X 1/ / X / / X 1/ / X 1/ / X / / X 1/ X 1/ X / X 1/ X / / X 1/ / X / / X / X 1/ X / X X 11/ X 11/ / X / X 11/ / X 11/ / X X X 11/ X 11/ X X 1/ X 11/ X X 1/ X / X / / X / X 11/ Please note that the following fittings are available in socket weld: elbows, tees, caps, couplings, reducers and unions. All dimensions for 10# Screwed Fittings are approximate; for exact decimal dimensions, please refer to ANSIB1. & B1.9 where applicable.
7 STAINLESS STEEL NIPPLES CLOSE SHORT 1/ / 11/ 1/ 7/ 11/ / 1 11/ 1/ 11/ 11/ / 1/ 1 11/ 11/ 1/ 1/ 11/ 1/ 1/ 1/ 1/ 1/ / 7/ 1/ 1/ 1/ 1/ Stock sizes in SCH 0S, SCH 0S Special lengths up to 0 feet available 7
8 PIPE THREADS ANSI/ASME B1.0.1 (NPT/API) NPS Number of Threads per inch BASIC DIMENSIONS OF AMERICAN NATIONAL STANDARD TAPER THREADS, NPT (ANSI/ASME B1.0.1) Pitch of Thread Depth of Thread Truncation, max. Pitch diameter at plane of handtight engagement Length from end of pipe to plane of handtight engagement Length of useful thread Length of vanish (or washout) thread P H L E L1 L L in mm in mm in mm in mm in Threads in Threads in Threads 1/ / / / / / / / / L 1 L E Taper of thread 1 in 1 measured on diameter E L 1 = Pitch diameter at handtight plane. This is also the pitch diameter at the gauge plane. = Length of normal handtight engagement. This is also the L1 gauge length. (Longer thread engagement may be used in special applications, such as flanges for high pressure use. In such cases the pitch diameter, E, remains as specified and the diameter at the end of the pipe is proportionally smaller.) L = Effective length of thread = Truncation from point of thread triangle to flat (not shown in diagram). Minimum = 0.0P for all pitches. See table for maximum. Example designation: / 1 NPT where / = nominal pipe size 1 = number of threads per inch NPT = symbol for the thread series and form (i.e., National (American) Standard Pipe, Taper) Tolerances When using L1 gauges to check threads, the thread is within permissible tolerance if the ring gauge face, or plug gauge notch, is +/ 1 turn from being flush with the end of the thread. Note: Basic dimensions are given to four or five decimal places to eliminate errors when calculating gauge dimensions, they do not imply a greater degree of precisions than is normally obtainable. Metric dimensions, where shown, are calculated from the inch values and rounded.
9 FORGED STAINLESS STEEL SOCKET WELDING FITTINGS 90º ELBOW, º ELBOW, CROSS, COUPLING, HALF COUPLING, TEE Wall Thickness Minimum Nom. Pipe 1/ 1/ / 1/ / 1 11/ 11/ 1/ Sock. Bore B Depth of Sock. Min. 000# 000# Sock. C Body G Sock. C Body G / / / / / / / / / / / /..7.1 Centre to Bottom of Socket Bore of Fitting D 000# 000# Tolerances, ± Laying Lengths 90 Ells, Tees & Crosses Ells Couplings Half Couplings A A E F A E F 000# 000# 000# 000# 7/1 7/1 /1 /1 1/ / /1 17/ /1 /1 1/ / / / /1 7/1 1/ 11/ / / 7/1 1/ / 7/ / 7/ 1/ 9/1 / 1/ / 11/1 9/1 11/1 1/ 11/ /1 11/ 11/1 1/1 1/ 1/ / 11/ 1/1 1 1/ 11/ / 1/ 1 11/ / 1/ / 11/ / 111/ / 11/ / 1/ / 1/ / 17/ ANSIB1.11 All dimensions are in inches. 9
10 FORGED STAINLESS STEEL THREADED FITTINGS 90º ELBOW, º ELBOW, CROSS, TEE Nominal Pipe Centre to End Elbows, Tees, Crosses A Centre to End Elbow C Outside of Band H Minimum Wall Thickness G Length of Thread, Min. 000# 000# 000# 000# 000# 000# 000# 000# 000# 000# 000# 000# B L 1/ 1/1 1/1 1/ 11/1 11/1 / 7/ 7/ / 1/1 1/ 11/ 11/1 / 7/ 7/ 1 1/ / / 11/ 1/1 / 7/ 1 1 1/1 11/ / 11/ 1/1 11/ 7/ 1 11/ 1/1 11/ 11/ / 1/1 11/ 1/ 1 11/ 1/1 11/ 11/1 / / 1/ 11/ 1/1 1/ 11/1 /1 7/ / 1/ / 11/1 1/ 111/1 /1 7/1 1/ / / 1/ 1/ 111/1 1/ 7/1 1/ / / 1/ / 111/1 1/ 1/1 1/ / / 1/ / 1/1 1/1 1/ / / / /1 1/ 1/ 1/ /1 / / /1 1/ 1/ 1/ 1/ 1/ / All dimensions are in inches. ANSIB
11 FORGED STAINLESS STEEL THREADED FITTINGS COUPLING, HALF COUPLING, CAP Nominal Pipe End to End Couplings W End to End Caps H Outside D 000# & 000# 000# 1/ 11/ / 000# 1/ 1/ 1 11/1 / 11/ 1 1/ 17/ 11/ / 17/1 End Wall Thickness G Min. 000# 000# 000# / 7/ /1 / 1 /1 11/1 7/ 11/ 1/1 11/ 11/ 11/ 1/ Length of Thread, Min. 000# B L..9 1/..01 /1 1/..07 1/ /1..7 1/ 1/ / / 1/ 111/1 1/ 1/ / 7/1.. 11/ / 1/ 11/1 1/ 1/ / 7/ / 1/ 1/ 17/ 1/ 7/1 1/.70.7 / 17/ / 1/ /.7.7 1/ / / 1/ / 1/ / / / 9/1 11/1 1/ / 7/ / 11/1 1/1 1/ 1/ 7/ 11/ All dimensions are in inches. ANSIB Dimension B is minimum length of perfect thread. The length of useful thread (B plus threads with fully formed roots and flat crests) shall not be less than L (effective length of external thread) required by American Standard for Pipe Threads (ASA B. 1). 11
12 FORGED STAINLESS STEEL THREADED FITTINGS Nominal Pipe Thread Length (min.) Plugs Square Head Plugs Round Head Hexagon Plugs & Bushings Height of Square (min.) Width s (min.) Nominal of Head Length (min.) Width s (min.) Hexagon Height min. A B C E D F G H 1/ / 1/ 9/ 1/ 1/ 7/1 1/ 1/ 7/1 1/ / 17/ 1/ / 1/ 1/ / 1/ /1 7/1 11/1 1/ 11/1 / /1 1/ 9/1 / 9/1 7/ 1/ 7/ /1 /1 / / 7/1 / 11/1 1/ 11/1 7/ / 1 / 1/ 1/1 1/1 1/ 1/ / 11/ 1/1 9/1 1/1 111/1 1/ 9/ 9/1 11/ 1/1 / 11/ 19/ /1 / 7/ 11/1 1/1 / 1/ 1/ 11/ 11/1 1/ 11/1 / 11/ 7/ / / / 11/ 1/1 111/1 1/ / 1/ 1/ 1/1 1/ 1/1 7/ 17/ 1/ 7/1 7/ 11/ 11/ 1/ 1/ / 1/ 11/ All dimensions are in inches. ANSIB1.11 Bushing PLUGS, BUSHINGS Plug 1
13 FORGED STAINLESS STEEL FITTINGS FORGED THREADED, SOCKET WELDING UNIONS 000# Nominal Pipe End to End A B C D E F 1/ / / / / / / / of Socket Outside of Nut Socket Length Height of Nut 1
14 FORGED STAINLESS STEEL FITTINGS SOCKET WELDING REDUCING INSERT 1 (in.) Dia. C Dia. D Insert Type For use with Sch. 0 and 0 Pipe For use with Sch. 10 Pipe Dimensions Insert Type Dimensions A B E F A B E F 1/X/ /1 / / 11/1 11/ 1/X1/.0. / / 7/1 11/1 1/X1/.0.0 / / 11/1 7/1 11/1 / /X1/ / 1 11/ 1 9/1 1/1 1/ /X/ /1 9/1 1/ / /X1/ / / 7/ 7/1 1/1 /X1/ / / 7/ 7/1 1/1 7/ 1X/ /1 1/1 11/ 1 / 11/ 1/ 1X1/ 1.. 1/ 1/1 9/1 11/ 1X/ /1 7/ 1 1/ 1 11/ 1X1/ 1.. / 1/1 1 7/1 11/1 11/ 11/X / 11/1 1/ 1 11/1 19/1 11/X/ /1 1/1 / 11/ 11/X1/ / 7/ 11/ 9/1 1/1 1/ 11/X11/ /1 1/1 1/ 1 / 11/1 /1 11/X / 1/1 11/1 17/1 11/X/ /1 7/ 11/ / 1/ 1/ 11/X1/ / 1/1 11/ 9/1 17/1 1/ X11/ / 1/1 1 7/ 1/ / X11/ /1 7/ 1/ / 1/1 X / 1/1 1/ 11/1 1/1 X/ /1 1 11/ / 1/ 1/ X1/.00. 1/ 11/1 11/ 9/1 17/1 1/ 1/X / 11/1 1 7/ 11/1 1/ 1/X11/ / 1/ 1/ 7/ 19/1 / 1/X11/ /1 11/1 1/ / 19/1 /1 1/X / 1/ 1/ 11/1 1/ X1/ / 11/1 / 1 7/ 1/ 7/ X.0.0 7/ 1/ 7/ 17/ /1 X11/ / 19/1 1/ 7/ 17/ / X11/ /1 1/ / 17/ /1 X / 11/ 1/ 11/1 11/1 X.0. 11/ 1/ /1 1 11/ 1/ / X1/ /1 1/1 / 7/ 1/1 7/ X.0.0 7/ 1/ 7/ 1/1 /1 X11/ / 1/ 1/ 7/ 17/ / X11/ /1 1/1 1/ / /1 X / 17/ 1/ 11/1 17/ ANSIB1.11
15 FORGED STAINLESS STEEL FITTINGS WEIGHT LIST POUNDS PER 100 PCS Name Working Press. 1/ / 1/ / 1 11/ 11/ 90º Ells S/W 000# º Ells Screw 000# º Ells S/W 000# º Ells Screw 000# Tees S/W 000# Tees Screw 000# # # per 100 pcs. Union Screw Union S/W Coupling S/W Coupling Screw 000# Caps S/W 000# Caps Screw 000# Hex. Head Plugs 000# Sq. Head Plugs 000# Hex. Bushing 000# Flush Bushing 000#
16 STAINLESS STEEL SWAGE NIPPLES Nominal Pipe (NPS) Outside End to End A Large End Small End 0. X X X X X X X X X X X X X X X X X X X X X X X Nominal Pipe (NPS) Outside End to End A Large End Small End 1.0 X X X X X X X X X X X X X X X X X X X X X X X Dimensions are in inches. Spec to MSS SP9 1
17 STAINLESS STEEL SWAGE NIPPLES Outside Nominal Pipe (NPS) Large End.00 X X 0. Outside Small End End to End A Nominal Pipe (NPS) Large End Small End End to End A X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Dimensions are in inches. Spec to MSS SP9 17
18 STAINLESS STEEL SWAGE NIPPLES Nominal Pipe (NPS) Outside End to End A Large End Small End.00 X X X X X X X X X X X X X X X X X X X X X X X Dimensions are in inches. Spec to MSS SP9 Nominal Pipe (NPS) Outside End to End A Large End Small End X X X X X X X X X X X X Nominal Pipe (NPS) Overall Length (inches) Outside Square Cut Ends (inches) Other End Connections (inches) ± ± ± ±0.10 ± ±0.10 ±0.00 ± ± ± Wall Thickness (See note 1) Not less than 7.% of nominal wall thickness Note 1: Prior to threading or grooving 1
19 FORGED STAINLESS STEEL BRANCH OUTLET FITTINGS A (Face of Fitting to Crotch) Outlet NPS Standard Reducing Extra Strong Full Reducing Schedule 10 Full Reducing Full Dimensions are in inches. Spec to MSS SP Tolerances:.1.7 ± ± ± ±
20 FORGED STAINLESS STEEL BRANCH OUTLET FITTINGS Outlet NPS A (Face of Fitting to Crotch) Threaded Socket Welding Dimensions are in inches. Spec to MSS SP97 Tolerances:.1.7 ± ± 0.0 0
21 STAINLESS STEEL BRANCH CONNECTIONS ELBOW & LATERALS Elbow Branch Connections Socket Weld Dimensions Nominal Elbow Inches Outlet Inches C E C E Threaded Order to Specific Elbow s Butt Weld 000# Threaded & Socket Weld Std. & XS Butt Weld Notes applying to Elbow B.C. and Lateral B.C. Socket Dimensions to ANSI B1.11 Butt Welding End Dimensions to ANSI B1.9 & ANSI B1. Each Elbow B.C. and smaller is uniquely designated to fit all the elbow sizes shown. The complete size range interchangeably is so marked on the fitting. 000# Threaded & Socket Weld Sch. 10 & XXS Butt Weld Available as Butt Welding outlets only. Alloy, stainless & other materials available from stock. Schedule 10 Butt Weld available and smaller. XXS Butt Weld available and smaller. 1
22 STAINLESS STEEL BRANCH CONNECTIONS ELBOW & LATERALS Lateral Branch Connections Socket Weld Threaded Butt Weld Also available for run sizes through Available as Butt Weld outlets only. Nominal Run Pipe Inches Outlet Inches 000 # Threaded & Socket Weld Std. & XS Butt Weld Dimensions 000# Threaded & Socket Weld Sch. 10 & XXS Butt Weld A B C A B C Order to Specific Run Pipe s
23 STAINLESS STEEL BRANCH CONNECTIONS INTERCHANGEABILITY OF SIZES Standard Weight and Extra Strong 000# Outlet Inches Run s Outlet sizes, 10, 1, 1, 1, 1, 0,,, 0 order to specific size combination. 000# Run s Outlet Inches
24 BRANCH CONNECTIONS INTERCHANGEABILITY OF SIZES Schedule 10 and XXS Outlet Inches Outlet sizes,,,, 10, 1 order to specific size combination. Run s Elbow Branch Connections 000# Threaded and Socket Weld Std. and XS Butt Weld 000# Threaded and Socket Weld Sch. 10 and XXS Butt Weld Outlet Inches B/w only Order to Specific Required.,,,,. Lateral Branch Connections 000# Threaded and Socket Weld Std. and XS Butt Weld 000# Threaded and Socket Weld Sch. 10 and XXS Butt Weld Outlet Inches When ordering, show run size first. Example: X
25 STAINLESS STEEL BUTT WELD DIMENSIONAL TOLERANCES All Fittings Nominal Pipe Plane Outside(1) at Bevel Inside(1) at End Wall() Thickness (NPS) 1/ TO 1/ TO 1/ TO 10 TO 1 0 TO +1/1 90 and Ells and Tees Reducers and Lap Joint Stub Ends Caps CentretoEnd Dimension Overall Length Overall Length A,B,C,M L E 10 Returns CentretoBacktoCentre Face Dimension Dimension O K Angularity Tol. Alignment at Ends Nominal Pipe SIze Off Angle Q P 1 to 1/ 1/1 U Off Angle ±1/ ±1/1 ±1/1 ±1/ ±1/ ±1/ ±1/ to 1/1 1/ ±1/1 ±1/1 ±1/1 ±1/1 ±1/ ±1/ ±1/ ±1/ 10 to 1 / /1 ±1/1 ±1/1 ±1/1 ±1/1 ±1/ ±1/ ±1/ ±1/ 1 to 1 / 1/ ±1/1 ±1/1 ±1/ ±1/ ±1/ ±1/ 1 to 1/ / ±/ ±/ ±1/ ±/ ±1/ ±1/1 ±/ ±/ ±1/ ±/ ±1/ ±1/1 1/ +1/ 1/1 +1/1 1/ +1/ / ±1/1 ±1/ Not less than 71/% of Normal Thickness All dimensions are in inches ±/ (1) Outofround is the sum of absolute values of plus and minus tolerance. () The inside diameter at ends and the nominal wall thicknesses are to be specified by the purchaser. IN ACCORDANCE WITH ANSIB1.9 B1. WELDING ENDS Nominal Wall Thickness (1) End Preparation Less than x Cut square or slightly chamfer, at mfr. s option x to 7/ incl. Plain bevel as in sketch a More than 7/ Compound bevel as in sketch b x = /1 for carbon steel, ferritic alloy steel, or wrought iron; 1/ for austentic alloy steel. IN ACCORDANCE WITH ANSIB1.9 B1.
26 STAINLESS STEEL LONG RADIUS 90º ELBOWS Standard Range Inches Approximate Weight Pounds Nominal Pipe O.D. Outside Centre to Face A Sch.S Sch.10S Sch.0S Sch.0S 1/ / / / / / / / / /.7 / / /.000 1/ / Dimensions same as Nominal Pipe
27 STAINLESS STEEL SHORT RADIUS 90º ELBOWS Standard Range Inches Approximate Weight Pounds Nominal Pipe O.D. Outside Centre to Face A Sch.S Sch.10S Sch.0S Sch.0S / / / / /.7 1/ /.000 1/ Dimensions same as Nominal Pipe 7
28 STAINLESS STEEL LONG RADIUS º ELBOWS Standard Range Inches Approximate Weight Pounds Nominal Pipe O.D. Outside Centre to Face A Sch.S Sch.10S Sch.0S Sch.0S 1/ 0.0 / / / / / / / / /.7 1/ /.000 1/ / / / / / / / / Dimensions same as Nominal Pipe
29 STAINLESS STEEL LONG RADIUS 10º RETURNS Standard Range Inches Nominal Pipe O.D. Outside 1/ 0.0 / / Centre to Centre O Approximate Weight Pounds Back to Face K Sch.S Sch.10S Sch.0S Sch.0S 17/ / 111/ / / / / / 1/ / /.7 71/ 1/ / / / 71/ / / / / / / Dimensions same as Nominal Pipe 9
30 STAINLESS STEEL SHORT RADIUS 10º RETURNS Standard Range Inches Approximate Weight Pounds Nominal Pipe O.D. Outside Centre to Centre O Back to Face K Sch.S Sch.10S Sch.0S Sch.0S / / 1.0 1/ 1/ / / / /.7 1/ / / / / / / / / / Dimensions same as Nominal Pipe 0
31 STAINLESS STEEL EQUAL TEES Standard Range Inches Nominal Pipe O.D. Outside 1/ / Approximate Weight Pounds Centre to Face C Sch.S Sch.10S Sch.0S Sch.0S / / / / / / / / / /.000 / / / / / / Dimensions same as Nominal Pipe 1
32 STAINLESS STEEL REDUCING TEES Standard Range Inches Approximate Weight Pounds Nominal Pipe O.D. O.D. Centre to Centre to Outside Outside Run Branch End C End M A B Sch.S Sch.10S Sch.0S Sch.0S / 1/ / 11/ / / 11/ / / 11/ / 1/ / 17/ / / / 17/ / / 17/ / 1/ / 1/ / / / 1/ / / 1/ / 11/ / 1/ / / 1/ / / / 1/ / / / / / / 11/ / / 11/ / /.7.7 / / / / / / / / 7/ / /.00.7 / 1/ / 11/ / 1/ / / 1/ / 1/ / 1/ / / / Dimensions same as Nominal Pipe
33 STAINLESS STEEL REDUCING TEES Standard Range Inches Nominal Pipe O.D. Outside A O.D. Outside B Approximate Weight Pounds Centre to End C Centre to End M Sch.S Sch.10S Sch.0S Sch.0S Run Branch 11/ / / / 1/ / / / / 7/ / / / 1/ /..7 7/ 1/ / / / / 1/ / / /..7 / / / 7/ /..000 / / 1/ / / / / / / / 71/ / 71/ / 7/ / / / Dimensions same as Nominal Pipe
34 STAINLESS STEEL REDUCING TEES Standard Range Inches Approximate Weight Pounds Nominal Pipe O.D. O.D. Centre to Centre to Outside Outside Run Branch End C End M A B Sch.S Sch.10S Sch.0S Sch.0S / / / / / / 11/ / 11/ / 1/ / / / / / / / / / Dimensions same as Nominal Pipe USE APPROXIMATE WEIGHTS OF STRAIGHT TEES FOR WEIGHTS OF REDUCING TEES
35 STAINLESS STEEL REDUCERS Standard Range Inches Approximate Weight Pounds Nominal Pipe O.D. Outside Length H Sch.S Sch.10S Sch.0S Sch.0S /X1/ 1.00X0.0 11/ X1/ 1.1X X/ 1.1X /X1/ 1.0X X/ 1.0X /X1 1.0X /X1/ 1.900X0.0 1/ /X/ 1.900X1.00 1/ /X X1.1 1/ /X11/ 1.900X1.0 1/ X1/.7X X/.7X X1.7X X11/.7X X11/.7X /X1.7X1.1 1/ /X11/.7X1.0 1/ /X11/.7X / /X.7X.7 1/ X1.00X1.1 1/ X11/.00X1.0 1/ X11/.00X / X.00X.7 1/ X1/.00X.7 1/ /X11/.000X /X11/.000X Dimensions same as Nominal Pipe
36 STAINLESS STEEL REDUCERS Standard Range Inches Approximate Weight Pounds Nominal Pipe O.D. Outside Length Sch.S Sch.10S Sch.0S Sch.0S 1/X.000X /X1/.000X /X.000X X11/.00X X.00X X1/.00X X.00X X1/.00X X.X X1/.X X.X X1/.X X.X X.X.7 1/ X1/.X.7 1/ X.X.00 1/ X1/.X.000 1/ X.X.00 1/ X.X. 1/ X.X X1/.X X.X X.X X.X X 10.70X X 10.70X Dimensions same as Nominal Pipe
37 STAINLESS STEEL REDUCERS Standard Range Inches Approximate Weight Pounds Nominal Pipe O.D. Outside Length H Sch.S Sch.10S Sch.0S Sch.0S 10X 10.70X X 10.70X X 1.70X X 1.70X X 1.70X X X X 1.000X X 1.000X X X X X X 1.000X X X X X X X X X X X X X X X X X X X X Dimensions same as Nominal Pipe Reducers of greater reduction are available but are not covered by ANSIB1.9 7
38 STAINLESS STEEL STUB ENDS TYPE A & B Nominal Pipe O.D. Outside Standard Range Inches O.D. Outside of Lap Length Radius ASA MSS Type A Type B 1/ / / / / / Type A & B Serrated Face Approximate Weight Pounds Sch.S Sch.10S Sch.0S Sch.0S ASA MSS ASA MSS ASA MSS ASA MSS ASA MSS ASA MSS ASA..9 MSS ASA.71.7 MSS ASA.. MSS ASA MSS ASA MSS ASA MSS ASA MSS ASA MSS ASA MSS
39 STAINLESS STEEL STUB ENDS TYPE A & B Standard Range Inches O.D. Nominal Outside Pipe Approximate Weight Pounds O.D. Outside of Lap ASA MSS Type A Type B Length Radius Sch.S Sch.10S Sch.0S Sch.0S ASA MSS ASA MSS ASA MSS ASA MSS ASA MSS Type A & B Serrated Face 9
40 STAINLESS STEEL STUB ENDS TYPE C Standard Range Inches Approximate Weight Pounds Nominal Pipe O.D. Outside O.D. Outside of Lap MSS Length ASA Sch.S Sch.10S 1/ / / / /
41 STAINLESS STEEL END CAP Standard Range Inches Approximate Weight Pounds Nominal Pipe O.D. Outside Length E Sch.S Sch.10S Sch.0S Sch.0S 1/ / / / / / / / /.7 11/ /.000 1/ / / / /
Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More informationA Table of the Most Common Standard Pipe Sizes. Nominal Bore 1/2 inch (DN 15 mm), Outside Diameter 21.34 mm
Standard Pipe Sizes Standard Pipe Sizes Except for specialist applications, commercially available pipe comes in standard sizes. Pipes in a variety of materials - including carbon steel, steel alloys,
More informationCaps STANDARD WEIGHT Inches / Pounds
Standard Caps you are here: Home > Weldbend Catalog > Fittings > Caps Caps STANDARD WEIGHT Inches / Pounds For Metric Units >Click Here Nominal Pipe Size Outside Inside Wall Thickness (T) Length (E) Pipe
More informationDESCRIPTION. Stud Bolts for Pressure-Temperature Piping 2-1. General Purpose End-to-End Studs 2-2. Tap End Stud Bolts 2-3. Double End Stud Bolts 2-4
DESCRIPTION PAGE B7 Studs and Nuts Stud Bolts for Pressure-Temperature Piping 2-1 General Purpose End-to-End Studs 2-2 Tap End Stud Bolts 2-3 Double End Stud Bolts 2-4 Sigma Fasteners, Inc. Section 2 STUD
More informationStainless Steel Tubular Products
Stainless Steel Tubular Products r Disclaimer This Data is indicative only and as such is not to be relied upon in place of the full specification. In particular, mechanical property requirements vary
More informationASME/ANSI B16.1-1998 - Cast Iron Pipe Flanges and Flanged Fittings ASME/ANSI B16.3-1998 - Malleable Iron Threaded Fittings ASME/ANSI B16.
ASME/ANSI B16.1-1998 - Cast Iron Pipe Flanges and Flanged Fittings ASME/ANSI B16.3-1998 - Malleable Iron Threaded Fittings ASME/ANSI B16.4-1998 - Cast Iron Threaded Fittings ASME/ANSI B16.5-1996 - Pipe
More informationCALCULATION & DRAFTING STANDARDS MANUAL PROCEDURE: C&D 515 Bill of Materials Standard REV 0.0 5/6/04
BROWN MINNEAPOLIS TANK PAGE 1 OF 7 PURPOSE: Create and Drawing Uniformity Create, explain, and establish a standard bill of materials to be placed on every drawing (except the overall tank elevation and
More informationMetric System & Specifications
Metric System & Specifications Throughout history, people have been trying to limit the number of measurement systems. Today, only two systems, inch-pound and metric, are predominate in most industrial
More informationWorking Drawing and Assemblies. Chapter 10
Working Drawing and Assemblies Chapter 10 Objectives 1.Define working drawings. 2. Describe how working drawings are used in industry. 3. List the major components of a complete set of working drawings.
More informationAISI CHEMICAL COMPOSITION LIMITS: Nonresulphurized Carbon Steels
AISI CHEMICAL COMPOSITION LIMITS: Nonresulphurized Carbon Steels AISI No. 1008 1010 1012 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 10 1026 1027 1029 10 1035 1036 1037 1038 1039 10 1041 1042 1043
More informationRING JOINT SYSTEMS 207
RING JOINT SYSTEMS 07 08 Table of Contents Model R-88 Pages 10-11 Model R-88 Large Diameter Page 1 Model RH-1000 1000 PSI Coupling Page 13 Model RX-3000 3000 PSI Coupling Page 1 Model RX-3770 3770 PSI
More informationCopper and Copper Alloy Tube, Pipe and Fittings
Copper and Copper Alloy Tube, Pipe and Fittings COPPER and COPPER ALLOY TUBE and PIPE Seamless Copper Pipe: Copper pipe is almost pure copper manufactured to the requirements of ASTM B 42 - Standard Specification
More informationWhen to use Weldolets... 4,5. Quality Control... 6. How to Order and Specify Branch Connections... 7. Weldolet... 8-14. Standard...
BRANCH CONNECTIONS Table Of Contents When to use Weldolets... 4,5 Quality Control... 6 How to Order and Specify Branch Connections... 7 Weldolet... 8-14 Standard... 8,9 Extra Strong... 10,11 Schedule 160/XX
More informationFasteners and screw threads
ISO Standards Handbook: Fasteners and screw threads Volume 2: Product standards Contents Part 3 : Product standards 2001, Ed. 5, 1094 p., ISBN 92-67-10345-8 3.1 External drive hexagon head bolts and screws
More informationPIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification. 96 B. Riutta
PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification Number: 3503-11.2.610 Rev. 2 Rubber Lined Steel Pipe and Fittings Mechanically Coupled Plain End Type System Issued Revised Approved
More informationStainless Steel Single and Dual Circulation Kits
Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating
More informationTransport & Automotive CATALOGUE. March 2011. Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au. www.tubefit.com.
Transport & Automotive CATALOGUE Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au March 2011 www.tubefit.com.au Page 1 4 6 9 12 14 16 17 19 20 22 23 24 26 28 29 31 33 Index
More informationMachine Screws, Dowel Pins and Hardware
Machine Screws, Dowel Pins and Section Contents Plain Socket Head Screws...Page 13-2 Wire Locking Screws...Page 13-3 Captive Screws...Page 13- Ventilation Screws...Page 13- Shoulder Screws...Page 13-
More informationRemoving chips is a method for producing plastic threads of small diameters and high batches, which cause frequent failures of thread punches.
Plastic Threads Technical University of Gabrovo Yordanka Atanasova Threads in plastic products can be produced in three ways: a) by direct moulding with thread punch or die; b) by placing a threaded metal
More informationUNITED STATES CUTTING TOOL INSTITUTE Product Groupings for Standards Activities CUTTING TOOL PRODUCTS
CUTTING TOOL PRODUCTS 1. BORING ISO 5609 Boring bars for indexable inserts Dimensions ISO 6261 Boring bars (tool holders with cylindrical shank) for indexable inserts Designation JIS B 4128 Boring bars
More informationMACHINE DRAWING QUESTION BANK. 2. What are the parts not usually sectioned? (Nov 04)
MACHINE DRAWING QUESTION BANK UNIT-I 1. Answer the following: Sketch a i. Hexagonal nut convention, ii. Convention of a stud bolt. (Nov 04) 2. What are the parts not usually sectioned? (Nov 04) 3 Answer
More information60.12. Depend-O-Lok FxE Expansion Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date. DEPEND-O-LOK FxE EXPANSION COUPLING
60.1 D-O-L FxE expansion couplings are a bolted, split-sleeve design that provides for expansion and contraction at the coupled joint. These couplings are furnished with restraint rings that, when affixed
More informationGear Engineering Data. Spur Gear Gear Formulas Drive Selection Horsepower and Torque Tables
Engineering Gear Engineering Data Spur Gear Gear Formulas Drive Selection Horsepower and Torque Tables G-79 Gear Selection Stock Spur Gear Drive Selection When designing a stock gear drive using the horsepower
More informationHose Clamps & Fittings
All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw
More information2013 Edition. Flanged fittings 30"-64" NSF. industrial Applications, water & Wastewater. Certified to ANSI/NSF 61
30"-64" Ductile Iron industrial Applications, water & Wastewater 2 Table of Contents Flanged Fittings for Water 3 Flange Details 5 Flanged Fittings 6 90º and 45º Bend 6 22-1/2º and 11-1/4º Bends 7 Tees
More informationHK Trading Import Export e.k. is a family owned German company. Founded in 2004 HK Trading has established itself as a notable trading company.
HK Trading Import Export e.k. is a family owned German company. Founded in 2004 HK Trading has established itself as a notable trading company. Based on superb and fair business relationships to long-standing
More informationMachinery's Handbook 27th Edition TABLE OF CONTENTS FASTENERS
TABLE OF CONTENTS FASTENERS NAILS, SPIKES, AND WOOD SCREWS 1476 Wire Nails and Spikes 1477 Wood Screws RIVETS AND RIVETED JOINTS 1478 Riveted Joint Design 1478 Classes and Types of Joints 1478 General
More informationSPECIFICATIONS FOR STEEL PIPE
SPECIFICATIONS FOR STEEL PIPE Published pipe standards serve three functions. 1. They dictate manufacturing and testing requirements and prescribed methods of measuring the required mechanical and physical
More informationASTM A860/A860M-09 Standard Specification for Wrought High Strength. Ferritic Steel Butt Welding Fittings. 1. Scope :- 2. Reference Documents :-
Standard Specification for Wrought High Strength Ferritic Steel Butt Welding Fittings 1. Scope :- 1.1 This specification covers wrought high strength ferritic steel butt-welding fitting of seamless and
More informationTelescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001
Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator 2945 A 1" SQUARE STEM 9" MAX. = 10" MIN. = 7" FIELD ADJUSTMENT INSTRUCTIONS 1. Remove the top section from
More informationDARTMOUTH COLLEGE DESIGN January 3, 2012 & CONSTRUCTION GUIDELINES
SECTION 15062 STEAM AND CONDENSATE PIPING PART 1 DESIGN DIRECTIVES 1.1 QUALITY ASSURANCE A. Comply with the provisions of the following: 1.2 DESIGN CRITERIA 1. ASME B 31.9 Building Services Piping : for
More informationINDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED
INDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED Available in Sizes B C D E See Page 6 for Dimensions Kennedy Valve/Indicator Posts 17-1 INDICATOR POST STYLE 2945 A TELESCOPING
More informationVe-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below:
Needle Valves : - Needle valves have a slender, tapered point at the end of the valve stem that is lowered through the seat to restrict or block flow. Fluid flowing through the Needle valve turns 90 degrees
More informationwww.klmtechgroup.com TABLE OF CONTENT
Page : 1 of 16 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia ORIFICE FLANGES TABLE OF CONTENT SCOPE
More informationNickel Alloys, Stainless Steel and Other Corrosion Resistant Alloys ALASKAN COPPER & BRASS COMPANY
Bosses and Welding Outlets Branch Outlets in Copper-Nickel, Nickel Alloys, Stainless Steel and Other Corrosion Resistant Alloys ALASKAN COPPER & BRASS COMPANY T he various Alaskan Copper and Brass Company
More informationFactory-Made Wrought Buttwelding Fittings
(Revision of ASME B16.9-2007) Factory-Made Wrought Buttwelding Fittings AN AMERICAN NATIONAL STANDARD (Revision of ASME B16.9-2007) Factory-Made Wrought Buttwelding Fittings AN AMERICAN NATIONAL STANDARD
More informationLathe Milling Attachment
Lathe Milling Attachment By L C. MASON BY CLEVERLY stacking cold-rolled flat stock together, T-slots and slide for this lathe milling attachment are made without costly machinery. In fact, only two tools,
More informationThere is no upside to. down time
EXPANDED and PERFORATED Data and Specifications 30 Similar to Type 302 with excellent mechanical properties, resistance to many corrosive agents. Useful where sanitation and cleanliness are important.
More informationScrew Thread Design. Rev. 3-4-09
Screw Thread Design Screw Thread Fundamentals A screw thread is defined as a ridge of uniform section in the form of a helix on either the external or internal surface of a cylinder. Internal threads refer
More informationHYDRAULIC PIPING STANDARD HANDBOOK. Revision 1
HYDRAULIC PIPING STANDARD HANDBOOK Revision 1 Preface We aim to fill a gap in technical literature. At this moment there are no hydraulic piping standards available which cover different pressure classes
More informationAfrica s leading steel supplier CATALOGUE TUBE & PIPE. The Macsteel Group - Africa s leading steel supplier - www.macsteel.co.za
Africa s leading steel supplier CATALOGUE TUBE & PIPE - www.macsteel.co.za TUBE & PIPE CONTENTS 1. Contents 13. Conveyance SANS 1182 - Light Page 7 2. Contact Details 14. Conveyance SANS 719 - Large Bore
More informationCharts (Section XI) www.accordintl.com Ph. (713) 641-2288 Fax (713) 641-3636 Main PAGE #
Charts (Section XI) Part No. Description Page No. Fraction, Decimal, and Millimeter Conversion Chart 2 Measurement Chart (Metric & Standard) 3 Standard (ANSI B16.5) Flange Dimension Chart 4 Metric Flange
More informationMEDIUM & HEAVY PIPE GRADE C250 MANUFACTURING PROCESS GALVANISED FINISH STANDARD LENGTHS AUSTRALIAN STANDARDS THICKNESS AND MARKING
STEEL PIPE MEDIUM & HEAVY PIPE GRADE C250 MANUFACTURING PROCESS Grade C250 Pipe, for general mechanical and low pressure reticulation applications, is manufactured by cold-forming and high frequency Electric
More informationpvc well casing & drop pipe
CertainTeed pvc well casing & drop pipe PVC Well Products Sure Fit PVC well casing and drop pipe have gained broad acceptance since their introduction almost 40 years ago. Today, due to its outstanding
More informationSIZING AND CAPACITIES OF GAS PIPING
APPENDIX A (IFGS) SIZING AND CAPACITIES OF GAS PIPING (This appendix is informative and is not part of the code.) A.1 General. To determine the size of piping used in a gas piping system, the following
More informationSpecification for Rotary Drill Stem Elements
Addendum 1 March 2007 Effective Date: September 1, 2007 Specification for Rotary Drill Stem Elements ANSI/API SPECIFICATION 7-1 FIRST EDITION, MARCH 2006 EFFECTIVE DATE: SEPTEMBER 2006 ISO 10424-1:2004
More informationPipe Thread Types and Designations
Pipe Thread Types and Designations Overview: Different types of screw threads have evolved for fastening, and hydraulic systems. Of special concern are plastic-to-metal, taper/parallel threaded joints
More informationIt's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool
It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool H Craft Print Project No. 272 ERE'S a metal bender that will enable you to bend
More informationTYPE E Main Valve Sizes 3 /8 through 12
SD 3001F PRINTED IN U.S.A. SD 3001F/0707 A B TYPE E MAIN VALVE C D E TYPE E Main Valve Sizes 3 /8 through 12 The Spence Type E Main Valve is of normally closed, single seat design featuring packless construction,
More informationTechnical Handbook 1
Technical Handbook IMPORTANT HoloKrome has published this handbook as a guide to dimensional, mechanical, and application data for HoloKrome Socket Screw Products. However, the following limitations must
More informationBased on SG GSA Fire & Security Products Contract GS-07F-0396M, Mod PO-0099 January 30, 2013
SimplexGrinnell TXMAS ecommerce Ferguson Fire and Fabrication Sprinkler Price List Based on SG GSA Fire & Security Products Contract GS-07F-0396M, Mod PO-0099 January 30, 2013 Product ID Description TXMAS
More informationModel Specification 509 DRISCOPLEX 4200 and DRISCOPLEX 4300 Gravity Flow Sanitary Sewer
Model Specification 509 DRISCOPLEX 4200 and DRISCOPLEX 4300 Gravity Flow Sanitary Sewer The user may choose to adopt part or all of this Model Specification; however, the user should ensure that all parts
More informationWorking Pressure - Hose Ends
Working Pressure - Hose Ends The maximum dynamic working pressure of a hose assembly is the lesser of the rated working pressure of the hose and the end connection used. HIGH SPECIALTY HOSE ACCESSORRIES
More informationCARBON STEEL SWAGE NIPPLES AND BULL PLUGS
Sheet SN-611 Effective June 15, 2011 Supersedes SN-211 A Member of The Phoenix Forge Group Phoenix/Capitol Phone: 337-783-8628 Fax: 337-783-5360 Toll Free: 888-744-7326 Toll Free: 800-848-1100 www.capitolcamco.com
More informationThe Keep It Simple, Steel (KISS) Standard
The Keep It Simple, Steel (KISS) Standard A standard Electronic Data Interchange (EDI) format for the exchange of Bill of Material (BOM) information within the steel fabrication industry Updated in March
More informationwww.klmtechgroup.com TABLE OF CONTENTS
Page : 1 of 216 TABLE OF CONTENTS 1 GENERAL 2 1.1 Scope 2 1.2 Code and s 2 1.3 Pressure-Temperature Design 6 1.4 Pipe Wall Thickness Allowance 7 1.5 Ends 8 1.6 Units 8 1.7 Language 9 2 MATERIAL 9 2.1 General
More informationStyle 07 Zero Flex Rigid Coupling. Style 75 Flexible Coupling. Style 77 Flexible Coupling 11. Description
Style 07 Zero Flex Rigid Coupling The unique angled pad design adjusts to standard pipe tolerances to positively clamp the pipe to resist flexural and torsional loads. Working pressures are based on standard
More informationFITTINGS 5-01. 82A series Aluminium (light weight) compression fittings Ø 6... 42 mm tube size, BSPP and BSPT thread
FITTINS 82 series luminium (light weight) compression fittings Ø 6... 42 mm tube size, SPP and SPT thread 82 series rass compression fittings Ø 6... 42 mm tube size, SPP and SPT thread 83 series luminium
More informationDMS 680. Universal length measuring system gauge inspection for»iso 9000«requirements
DMS 680 Universal length measuring system gauge inspection for»iso 9000«requirements Universal length measuring system DMS 680 Wide range of applications For periodic inspection of gauges, reference gauges,
More informationDSM http://www.dsmmfg.com 1 (800) 886-6376
DESIGN GUIDE FOR BENT SHEET METAL This guide discusses how the bends are made, what thicknesses of sheet metal are commonly used, recommended bend radius to use when modeling the part, some practical limits
More informationNORSOK STANDARD COMMON REQUIREMENTS PIPING DETAILS
NORSOK STANDARD COMMON REQUIREMENTS DETAILS L-CR-003 Rev. 1, January 1996 Please note that whilst every effort has been made to ensure the accuracy of the NORSOK standards neither OLF nor TBL or any of
More informationGOST 632-80 CASING AND COUPLINGS
GOST 632-80 CASING AND COUPLINGS Casing to this standard shall be seamless, with round and buttress-type threads (OTTM-type casing), with high-seal thread connection (OTTG-type casing) and respective couplings;
More informationTwo most common lock nut groups: 1-Prevailing Torque Type Lock Nuts:
Two most common lock nut groups: 1. PREVAILING TORQUE a design feature of the lock nut produces friction between threads of mated components thereby increasing the force needed to tighten as well as loosen
More informationNumber Wheeler P/N Description Set Rex P/N Notes
1 604041 Base 1 4041 2 604042 Base Cover 1 4042 3 608849 Washer (M5) 2 4 600124 Spring Washer (M5) 2 5 600329 Rd Hd Machine Screw (M5x8) 2 6 604047 Strainer 1 4047 7 600204 Rd Hd Machine Screw (M6x10)
More informationThread and End Connection
www.swagelok.com and End Connection Identification Guide 2 Contents Introduction and End Connection Terminology.. 4 General Terminology... 5 Step-by-Step Identification Procedure for s and End Connections...
More informationCajon VCR Fittings. Flanges, Fittings, & Components. Cajon & Swagelok Fittings. Cajon VCR Fittings. Nuts, Caps, & Plugs. Socket Weld Glands
Cajon VCR Fittings Cajon VCR Fittings Make excellent low-pressure gas connections Ideal for lecture bottle gas cylinders, standard helium checks, and general gas plumbing Withstand bakeout to 58º C (with
More informationTY-FLO Needle Valves
Design/Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.17 to.438 in. Flow Coefficients (C V ) from.37 to.7 Straight or angle flow patterns Optional panel mount Handle options available Non-wetted
More informationSTOCK LIST & BUYER S GUIDE
STOCK LIST & BUYER S GUIDE common Decimal equivalents 1/64 =.0156 1/32 =.0312 1/16 =.0625 3/32 =.0937 1/8 =.125 3/16 =.1875 7/32 =.2187 1/4 =.250 9/32 =.2812 5/16 =.3125 3/8 =.375 7/16 =.4375 1/2 =.500
More informationNOTE: All orders are accepted on the basis of prices in effect at the time of shipment.
FORGED CARBON STEEL FITTINGS & FORGED STEEL UNIONS Screwed and Socket Welding Price Sheet CSF-4.11 Effective: April 18, 2011 Cancels Price Sheet CSF-1.09 & U-1.09 of January 26, 2009 FOR THE MOST CURRENT
More informationPower Cube Open Source Ecology Page 1. Power Cube. Version 4
Power Cube Open Source Ecology Page 1 Power Cube Version 4 Power Cube Open Source Ecology Page 2 Contents Table of Contents Power Cube... 1 Contents...2 Introduction... 3 Bill Of Materials...4 Discrete
More informationGeberit Mapress Catalogue 2008 / 2009. Valid from 1 April 2008
Geberit Mapress Catalogue 2008 / 2009 Vali from 1 April 2008 Mapress Stainless Steel Page 3 Mapress CrNi Steel Page 23 Mapress Stainless Steel silicone-free Page 25 Mapress Stainless Steel Gas Page 39
More informationVogt Valves The Connection Bulletin for Extended Body Forged Steel Valves Welded Bonnet, Bolted Bonnet, Class 800 & Class 1500 CB 22
The Connection Bulletin for Extended Body Forged Steel Valves Welded Bonnet, Bolted Bonnet, Class 800 & Class 1500 CB 22 Extended Body Forged Steel Valves An extended body gate valve specifically designed
More informationEquivalents & Conversion Factors 406 Capacity Formulas for Steam Loads 407 Formulas for Control Valve Sizing 408-409
Engineering Data Table of Contents Page No. I II Formulas, Conversions & Guidelines Equivalents & Conversion Factors 406 Capacity Formulas for Steam Loads 407 Formulas for Control Sizing 408-409 Steam
More informationFord Service Saddles and Tapping Sleeves
THE FORD METER BOX COMPANY, INC. ISO 9001:2008 10002505 Section AA 02/2015 Web Revision 12/17/2015 Ford Service Saddles and Tapping Sleeves Contents Page Recommended Product Application *Steel *C900 Cast
More informationFLANGED. LOW CARBON STEEL C -..23% max. P - 0.04% max. Mn -.090% max. S - 0.05% max. 50,000 psi (min.)
CD S FLANGED 4-40.187.250 6-32.218.250 8-32.250.250 10-32.250.250 10-24.250.250 1/4-20.312.375 5/16.375.500 3/8-16.437.500 ORDER CODE: CDF CD S FLANGED METRIC M2.5 X.45 3.1 6 M3 X.50 4.5 6 M4 X.70 5.5
More informationINSTALLATION INSTRUCTIONS for INSIGHT FIBER OPTIC FLAME SCANNERS
CU-101 DECEMBER 3, 2015 INSTALLATION INSTRUCTIONS for INSIGHT FIBER OPTIC FLAME SCANNERS APPLICATION The FIREYE fiber optic scanners have been designed for installation on burners where movable vanes,
More informationOD 1401 9 PRECISION MEASURING INSTRUMENTS
SUBCOURSE EDITION OD 1401 9 PRECISION MEASURING INSTRUMENTS PRECISION MEASURING INSTRUMENTS SUBCOURSE OD1401 EDITION 9 Unites States Army Combined Arms Support Command Fort Lee, VA 23801-1809 5 CREDIT
More informationThis last dimension, the thread pitch diameter, is the most important as it is a reference from which all other thread measurements originate
Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of the design and use of various thread types and how they are produced.
More informationHose and Tube Fittings Series 1-3
Embracing Challenge Hose and Tube Fittings Series 1-3 out of plastics PP, PVDF, PTFE Series 1 Special Features Corrosion resistant Gas tight Easy to handle Different connection threads Application Hose
More informationFastener Handout. Introduction: Engineering Design Representation 2. Threads 2. Local Notes (callouts) 8. Threaded Mechanical Fasteners 13
Fastener Handout Introduction: Engineering Design Representation 2 Threads 2 Effect of thread angle on strength: 3 Standardization of Threads: 4 Descriptions of the Thread Series: 4 Class fit: 5 Specification
More informationStandard Bills of Materials Commonly Ordered Models Only
Standard Bills of Materials Commonly Ordered Models Only Meters Always check www.lcmeter.com for the most current BOM. This document is for reference only. Always use Bill of Material shipped with meter
More information*** MAIN VERSION OF BOM ***
*** MAIN VERSION OF BOM *** This is the main parts list for the 2013-2014 FTC game. The parts are listed in different categories (such as "Field Elements, "Hardware," "Wood," etc.). The item numbers assigned
More informationChapter 3 Installing Over-the-Post Railing on an L-Shaped Stair
49 Chapter 3 Installing Over-the-Post Railing on an L-Shaped Stair In this chapter: The Over-the-Post Balustrade System Determining the Rail Centerline Using Rail Bolts Making a Pitch Block Laying Out
More informationThese features have made Lo Torc valves the choice of high pressure plug value users, worldwide:
LO TORC Plug Valve The high value, dependable performance, and low maintenance requirements of Halliburton Lo Torc valves can help reduce overall operating costs and help cut downtime. These features have
More informationNumber Wheeler P/N Description Set Rex P/N Notes
1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056
More informationParts Manual. TWIN 2 & 3 Parts & Accessories F210846R01. Your efficiency is our Challenge!
Parts Manual TWIN 2 & 3 Parts & Accessories F210846R01 Your efficiency is our Challenge! All rights reserved. No part of this manual may be copied and/or published by means of printing, photocopying, microfilm
More information8D.1 BALL ANGLE METER VALVES - 3/4" & 1" P-24258 B-24258 E-24259 B-24259 B-24266 B-24267
BALL ANGLE METER VALVES - 3/4" & " 8D. B-24258 MUELLER 300 Ball Angle Meter Valve MUELLER 0 Conductive Compression Connection for CTS O.D.* tubing x meter swivel nut** adding -3 suffix to catalog number.
More informationStandard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges 1
Designation: F 1545 97 e1 An American National Standard Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges 1 This standard is issued under the fixed designation F 1545;
More informationTABLE OF CONTENTS 2 Heavy-Wall Seamless & Welded Carbon Steel Pipe. 4 Alloy Pipe & Tube. 6 Chrome-Moly Pipe. 7 Low-Temp Pipe
PRODUCT CATALOG TABLE OF CONTENTS 2 Heavy-Wall Seamless & Welded Carbon Steel Pipe 4 Alloy Pipe & Tube 6 Chrome-Moly Pipe 7 Low-Temp Pipe 9 Services amerpipe.com 1.800.316.5737 sales@amerpipe.com 18333
More informationFastener Handout. Introduction: Engineering Design Representation 2. Threads 2. Local Notes (callouts) 8. Threaded Mechanical Fasteners 13
Fastener Handout Introduction: Engineering Design Representation 2 Threads 2 Effect of thread angle on strength: 3 Standardization of Threads: 4 Descriptions of the Thread Series: 4 Class fit: 5 Specification
More informationVrtné trubky Drill Pipe
Vrtné trubky Drill Pipe VRTNÉ ROURY - zušlechtěné závity - vysoká kvalita těla roury - svařeno třením - vysoká přímost vrtných tyčí - závity dle STN, API, DIN a GOST - délky dle přání zákazníka Průměr
More informationTIRE & TUBE SECTION DEFINITIONS: OVERALL WIDTH SECTION HEIGHT (D) OVERALL DIAMETER (A) SECTION WIDTH (B) NOMINAL RIM DIAMETER (C)
TIRE & TUBE SECTION Knowing some basic facts about tire dimensions and sizes along with a few technical aspects of tire construction can help clear up much of the confusion many people have in understanding
More informationLEADER IN CUTTING TECHNOLOGY
LEADER IN CUTTING TECHNOLOGY FOR OVER 2 YEARS REASONS WHY TRONEX IS THE BEST IN THE WORLD 1 2 SUPERIOR CUTTING PERFORMANCE Cut hundreds of thousands of times before dulling. Cut hundreds of thousands of
More informationMachinery's Handbook 27th Edition OTHER THREADS
Previous page Machinery's Handbook 27th Edition INTERFERENCE FIT THREADS 1877 OTHER THREADS Interference-Fit Threads Interference-Fit Threads. Interference-fit threads are threads in which the externally
More informationOVERALL CONVEYOR WIDTH STEEL ALUMINUM MODEL # PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT.
Pick Smarter. Pick Better. Pick UNEX. Skatewheel (SW) Skatewheel Gravity Conveyor is ideally suited to convey lightweight packages and where operations require portable or temporary conveyor lines such
More informationWD600 STEAM TRAPS. Thermodynamic Steam Trap
WD600 Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2010 Watson McDaniel Company WD600, WD600L Sizes 3/8, 1/2, 3/4, 1 NPT Material Stainless
More informationMaking 3D Threads in Feature Based Solid Modelers
Making 3D Threads in Feature Based Solid Modelers THREAD BASICS Making true geometric threads in feature-based solid modelers is a fairly straightforward process and can be handled using several different
More informationRING TYPE JOINT GASKETS
RING TYPE JOINT GASKETS 05.07 GLOBAL RESOURCE FLEXITALLIC, A WORLDWIDE ORGANIZATION LOCAL SERVICE COMMITTED TO MEETING CUSTOMER NEEDS COMPREHENSIVE PRODUCT RANGE FOR ALL INDUSTRIAL AND PETROCHEMICAL APPLICATIONS
More informationTubular connection elements
KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: 061307-3801 Tubular connection elements 429 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: 061307-3801 Technical information on the tubular
More information