4Duino-24. Quick Start Guide. 2.4 Arduino IDE Programmable Display Module with Resistive Touch and Integrated WiFi 4DUINO QUICK START GUIDE
|
|
- Dorothy Marsh
- 7 years ago
- Views:
Transcription
1 4Duino Arduino IDE Programmable Display Module with Resistive Touch and Integrated WiFi Quick Start Guide
2 What s included? 4Duino Display Module 4x female headers 1x 6 way male header *Please note that the headers need to be soldered by the user. Supporting Documents Datasheet, Quick Start Guide, Start CAD step model, 3D-PDF, applicable downloads, documents and application notes are available on the 4Duino website, NOTE: Please refer to the 4D Systems website for current components included in the Starter Kit. Simply select the Starter Kit option when purchasing the chosen display module on the 4D Systems shopping cart, or from your local distributor. Specifications Atmega32U4 with preprogramed Arduino bootloader. Powerful 2.4 Intelligent LCD-TFT display module powered by the 4D Labs Picaso Graphics Processor, preprogramed with the Serial SPE command set 240 x 320 Resolution, RGB 65K true to life colours, TFT Screen with integrated 4-wire Resistive Touch Panel ESP Wi-Fi module with preprogramed AT command set firmware. 20 Digital I/O pins including 12 Analog inputs 7 PWM outputs 5 External interrupts On-board micro-sd memory card connector for multimedia storage and data logging purposes DOS compatible file access (FAT16 format) as well as low level access to card memory On-board USB for programming the ATmega32U4, from the Workshop4 IDE or from the Arduino IDE 4.0V to 5.5V range operation (Supply) 5.0V Supply, available to be powered from the on-board USB port or 5V DC jack. Compatible international 1Amp DC Adaptors are available Display Viewing Area : x mm RoHS and CE Compliant 2
3 The 4Duino is capable of being programmed from the Arduino IDE, or from the Workshop4 IDE. The Workshop4 IDE provides additional benefits when programming the 4Dunio, such as advanced graphics options, which are not available when using the Arduino IDE. Before getting started Install and solder the 5 header, supplied with the 4Duino. Refer to 4Duino Datasheet for soldering instructions. (Link to datasheet). Headers are optional but recommended unless using direct wires or alternate headers (not supplied). Let s get started REQUIREMENTS: Download and Install 4D Systems own signed Microsoft driver for the 4Duino, which is available for download from 4Duino product page on the 4D Systems website. Add the 4Duino hardware support to the Arduino environment (Compulsory) 1) Open Arduino IDE 2) Install the 4D Systems JSON files into the Arduino IDE preferences. 3
4 I. Add the following JSON URL into the Preferences window of Arduino IDE, under the Additional Boards Manager URLs field: II. Open the Board Manager from the Tools menu, at the top of the Board selection. 4
5 III. Simply click on the listing for 4D Systems AVR Boards by 4D Systems, and select the version that relates to your Arduino IDE and click the Install button. Programming using WS4 (Windows only) 5
6 1) Download and Install the latest IDE from 4D Systems website ( 2) With 4Duino connected to your computer, open Workshop 4 IDE and create a new project 3) Select 4Duino from the list 4) Select the desired orientation for your project 5) Click Next 6) Choose a WS4-4Duino Programming Environment to start creating your project
7 Programming using Arduino IDE (All Operating Systems) 1) With 4Duino connected to your computer, open Arduino IDE 2) Now choose the board 4Duino Picaso 2.4 3) Check the com port of the 4Duino and change it accordingly in the Arduino IDE. Now you are read program your 4Duino using the Arduino IDE. Please refer to the 4Duino datasheet for the latest information and for complete instructions on how to use your 4Duino display module. 7
8 uinotm
A-307. Mobile Data Terminal. Android OS Platform Datasheet
A-307 Mobile Data Terminal Android OS Platform Datasheet Revision 1.1 July, 2013 Introduction A-307 Platform Overview Introduction A-307 Platform Overview The A-307 provides Original Equipment Manufacturers
More informationDATASHEET. ADAM Arduino Display Adaptor Module. Arduino Compatible Shield P/N: 4Display-Shield-FT843 For the 4D Systems 4DLCD-FT843 Display
DATASHEET ADAM Arduino Display Adaptor Module Arduino Compatible Shield P/N: 4Display-Shield-FT843 For the 4D Systems 4DLCD-FT843 Display Document Date: 8 th January 2014 Document Revision: 1.0 Uncontrolled
More informationSBC8600B Single Board Computer
SBC8600B Single Board Computer 720MHz TI s Sitara AM3359 ARM Cortex-A8 Microprocessor Onboard 512MByte DDR3 SDRAM and 512MByte NAND Flash UARTs, 2*USB Host and 1*OTG, 2*Ethernet, CAN, RS485, LCD/TSP, Audio,
More informationFLYPORT Wi-Fi 802.11G
FLYPORT Wi-Fi 802.11G System on module 802.11g WIFI - Infrastructure mode - softap mode - Ad hoc mode Microchip PIC 24F 16 bit processor Microchip MRF24WG0MA/MB - Native WiFi 802.11g transceiver - PCB
More informationSainSmart UNO R3 Starter Kit
SainSmart UNO R3 Starter Kit //SainSmart UNO R3 The SainSmart UNO R3 is one of several development boards based on the ATmega328-AU. We like it mainly because of its extensive support network and its versatility.
More informationElectronics Ltd. Presenting. Power, Intelligence... with a sense of feeling
Electronics Ltd Presenting Power, Intelligence... with a sense of feeling By Appointment to Her Majesty The Queen Supplier of Fire Detection Equipment Kentec Electronics Ltd. Dartford Plug in slots K772
More informationEmbedded Display Module EDM6070
Embedded Display Module EDM6070 Atmel AT91SAM9X35 Based Single Board Computer BY Product Overview Version 1.0 Dated: 3 rd Dec 2013 Table of Contents Product Overview... 2 Introduction... 2 Kit Contents...
More informationUPS PIco. to be used with. Raspberry Pi B+, A+, B, and A. HAT Compliant. Raspberry Pi is a trademark of the Raspberry Pi Foundation
UPS PIco Uninterruptible Power Supply with Peripherals and I 2 C control Interface to be used with Raspberry Pi B+, A+, B, and A HAT Compliant Raspberry Pi is a trademark of the Raspberry Pi Foundation
More informationOrbit PCI Mk 2 Network Card. User Manual. Part No. 502566 Issue 4
Orbit PCI Mk 2 Network Card User Manual Part No. 502566 Issue 4 Information in this document is subject to change without notice. Companies, names and data used in examples herein are fictitious unless
More informationYun Shield User Manual VERSION: 1.0. Yun Shield User Manual 1 / 22. www.dragino.com
Yun Shield User Manual VERSION: 1.0 Version Description Date 0.1 Initiate 2014-Jun-21 1.0 Release 2014-Jul-08 Yun Shield User Manual 1 / 22 Index: 1 Introduction... 3 1.1 What is Yun Shield... 3 1.2 Specifications...
More informationArduino Due Back. Warning: Unlike other Arduino boards, the Arduino Due board runs at 3.3V. The maximum. Overview
R Arduino Due Arduino Due Front Arduino Due Back Overview The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU (datasheet). It is the first Arduino board based on a 32-bit
More informationGauge Drawing Tool... 8. Slider Drawing Tool... 8. Toggle Button Drawing Tool... 8. One-Way List Drawing Tool... 8
v. 20120510 Table of Contents RTiPanel Overview and Requirements... 3 Software Requirements:... 3 Hardware Requirements:... 3 Network Requirements:... 3 Licensing Requirements:... 4 Basic Integration Designer
More informationA-317. Mobile Data Terminal. Android Platform Datasheet
A-317 Mobile Data Terminal Android Platform Datasheet Revision 1.4 October, 2014 Disclaimer: Micronet reserves the right to change product specifications without prior notice. Introduction A-317 Platform
More informationEasy! Smooth! GP/ST-3500 Series->GP4000 Series Replacement Guidebook
Easy! Smooth! GP/ST-3500 Series->GP4000 Series Replacement Guidebook 1/46 The 6th Edition April 2013 Copyright 2013.4 Digital Electronics Corporation. All Rights Reserved. Preface This guidebook introduces
More informationBoard also Supports MicroBridge
This product is ATmega2560 based Freeduino-Mega with USB Host Interface to Communicate with Android Powered Devices* like Android Phone or Tab using Android Open Accessory API and Development Kit (ADK)
More informationKTA-223 Arduino Compatible Relay Controller
8 Relay Outputs 5A 250VAC 4 Opto-Isolated Inputs 5-30VDC 3 Analog Inputs (10 bit) Connections via Pluggable Screw Terminals 0-5V or 0-20mA Analog Inputs, Jumper Selectable 5A Relay Switching Power Indicator
More informationProduct Brief. 2.0 microtoled. Intelligent GOLDELOX Display Module. µtoled-20-g2. www.4dsystems.com.au Rev 1.0
Product Brief 2.0 microtoled Intelligent GOLDELOX Display Module µtoled-20-g2 www.4dsystems.com.au Rev 1.0 MESSAGE FROM THE CEO To our valued customers, Thank you for your interest in 4D Systems and the
More informationSelect Correct USB Driver
Select Correct USB Driver Windows often installs updated drivers automatically, and defaults to this latest version. Not all of these drivers are compatible with our software. If you are experiencing communications
More informationProgramming Device Manual Booklet AVR Prog USB v2
Programming Device Manual Booklet AVR Prog USB v2 Programming device manual booklet: AVR Prog USB v2, STK500 v2 www.and-tech.pl Page 1 Content 1. Installation...3 2. HID mode drivers installation....3
More informationDUKANE Intelligent Assembly Solutions
PC Configuration Requirements: Configuration Requirements for ipc Operation The hardware and operating system of the PC must comply with a list of minimum requirements for proper operation with the ipc
More informationSBC6245 Single Board Computer
SBC6245 Single Board Computer 400MHz Atmel AT91SAM9G45 ARM 926EJ-STM Microcontroller On Board 128MB Nand Flash plus 128MB DDR2 SDRAM RS232, RS485, Ethernet, USB Host, LCD, Touch Screen, RTC, Supports for
More informationUSB DRIVER INSTALLATION GUIDE
USB DRIVER INSTALLATION GUIDE Please read this installation guide before installing the USB driver. This installation guide describes how to install the USB driver included in the Icom product s CD. If
More informationIOVU-571N ARM-based Panel PC
IOVU-571N ARM-based Panel PC Features RISC-based Panel PC IOVU-57N Application Dimensions Ordering Information Specifications ARM-based Panel PC IOVU-571N Serial IOVU software support Packing List Options
More informationTutorial for MPLAB Starter Kit for PIC18F
Tutorial for MPLAB Starter Kit for PIC18F 2006 Microchip Technology Incorporated. All Rights Reserved. WebSeminar Title Slide 1 Welcome to the tutorial for the MPLAB Starter Kit for PIC18F. My name is
More informationCAN-Bus Shield Hookup Guide
Page 1 of 8 CAN-Bus Shield Hookup Guide Introduction The CAN-Bus Shield provides your Arduino or Redboard with CAN-Bus capabilities and allows you to hack your vehicle! CAN-Bus Shield connected to a RedBoard.
More informationVirtual COM Port Driver Installation Manual
Virtual COM Port Driver Installation Manual Installing the virtual COM port driver software on a computer makes possible CAT communication via a USB cable to the SCU-17 or an enabled transceivers. This
More informationArduino ADK Back. For information on using the board with the Android OS, see Google's ADK documentation.
Arduino ADK Arduino ADK R3 Front Arduino ADK R3 Back Arduino ADK Front Arduino ADK Back Overview The Arduino ADK is a microcontroller board based on the ATmega2560 (datasheet). It has a USB host interface
More informationPC computer configurations & Windows optimizations (Updated November 2012)
PC computer configurations & Windows optimizations (Updated November 2012) A fast processor and a good amount of memory are important, but do not necessarily guarantee that a computer will perform well
More informationVirtual COM Port Driver Installation Manual
Virtual COM Port Driver Installation Manual Installing the virtual COM port driver software on a computer makes possible CAT communication via a USB cable to the FT-991 transceiver. This will allow computer
More informationUser Manual Web Operating Panel AP User Manual. General Settings, Updating and Troubleshooting
User Manual Web Operating Panel AP User Manual General Settings, Updating and Troubleshooting Copyright The documentation and the software included with this product are copyrighted 2010 by Advantech Co.,
More informationLab Experiment 1: The LPC 2148 Education Board
Lab Experiment 1: The LPC 2148 Education Board 1 Introduction The aim of this course ECE 425L is to help you understand and utilize the functionalities of ARM7TDMI LPC2148 microcontroller. To do that,
More informationQuick Installation. A Series of Intelligent Bar Code Reader with NeuroFuzzy Decoding. Quick Installation
Quick Installation A Series of Intelligent Bar Code Reader with NeuroFuzzy Decoding This chapter intends to get your new FuzzyScan scanner working with your existing system within minutes. General instructions
More informationQT1 Xplained Pro. Preface. Atmel QTouch USER GUIDE
Atmel QTouch QT1 Xplained Pro USER GUIDE Preface Atmel QT1 Xplained Pro kit is a set of two extension boards that enables evaluation of self- and mutual capacitance mode touch using the Peripheral Touch
More informationPhone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Safety Precautions Read and understand this specifications, instruction manual, installation manual and catalog to make proper use of the product. WARNING If critical situations that could lead to user
More informationIntro to Intel Galileo - IoT Apps GERARDO CARMONA
Intro to Intel Galileo - IoT Apps GERARDO CARMONA IRVING LLAMAS Welcome! Campus Party Guadalajara 2015 Introduction In this course we will focus on how to get started with the Intel Galileo Gen 2 development
More informationUSBSPYDER08 Discovery Kit for Freescale MC9RS08KA, MC9S08QD and MC9S08QG Microcontrollers User s Manual
USBSPYDER08 Discovery Kit for Freescale MC9RS08KA, MC9S08QD and MC9S08QG Microcontrollers User s Manual Copyright 2007 SofTec Microsystems DC01197 We want your feedback! SofTec Microsystems is always on
More informationUSB / Data-Acquisition Module NOW LEAD-FREE
USB / Data-Acquisition Module NOW LEAD-FREE DLP-TEMP-G Features: Digital I/Os, Analog Inputs (0- Volts) or any combination USB. and.0 Compatible Interface th Generation Silicon from FTDI Supports Up To
More informationUsing the Communication Ports on the DG-700 and DG-500 Digital Pressure Gauges
Using the Communication Ports on the DG-700 and DG-500 Digital Pressure Gauges 1. USB and Serial Communication Ports: Newer DG-700 and DG-500 gauges contain both a USB and a DB-9 Serial Communication Port,
More informationMajor upgrade versions. To see which features each version of Windows 7 has, go to Microsoft's Compare Windows page.
Windows 7 Upgrading to Windows 7 Introduction Page 1 Now that you have explored what Windows 7 has to offer, we can help you understand what's involved in moving to the new operating system. In this lesson,
More informationARM Cortex -A8 SBC with MIPI CSI Camera and Spartan -6 FPGA SBC1654
ARM Cortex -A8 SBC with MIPI CSI Camera and Spartan -6 FPGA SBC1654 Features ARM Cortex-A8 processor, 800MHz Xilinx Spartan-6 FPGA expands vision processing capabilities Dual MIPI CSI-2 CMOS camera ports,
More informationScanWin Installation and Windows 7-64 bit operating system
ScanWin Installation and Windows 7-64 bit operating system In order to run the ScanWin Pro install and program on Windows 7 64 bit operating system you need to install a Virtual PC and then install a valid,
More informationT-BOXN12R. First steps with T-BOXN12R. You can make it wireless. Date: 2004-07-16 Version 1.0
T-BOXN12R You can make it wireless First steps with T-BOXN12R Date: 2004-07-16 Version 1.0 Content 1. Purpose of this document... 3 2. T-BoxN12R overview... 4 3. First step... 5 3.1. Preparing your workshop
More informationSecond Display Installation Guide Point-of-Sale Hardware System
Second Display Installation Guide Point-of-Sale Hardware System 48200150 August 2002 V1.0 1. Accessory VGA Cable Serial Cable Warranty Card Drivers Bank The following drivers in the folders of Driver Bank
More informationINDEX. Trademarks All name and product s trademarks mentioned below are the property of their respective companies.
USB2.0 EASY IDE ADAPTER INDEX Trademarks ---------------------------------------------------------------------------- Introduction ---------------------------------------------------------------------------
More informationINTRODUCTION TO SERIAL ARM
INTRODUCTION TO SERIAL ARM A robot manipulator consists of links connected by joints. The links of the manipulator can be considered to form a kinematic chain. The business end of the kinematic chain of
More information3.2 inch Arduino LCD Shield User Guide
Rev 2.0, Nov 2012 Table of Contents 1 Introduction... 3 2 Features... 3 3 Specifications... 3 4 Pin Definition... 4 5 Fimware library... 4 6 FAQs... 4 Revision History Revision Description Confirm by V1.0
More informationDSO138 oscilloscope program upgrade method
DSO138 oscilloscope program upgrade method Applicable models: 13801K, 13802K Program upgrade Principle The DSO138 is a SCM STM32F103C8 internal oscilloscope that is preinstalled with a flash bootloader,
More informationUser's Guide DylosLogger Software Version 1.6
User's Guide DylosLogger Software Version 1.6 The DylosLogger software allows users of Dylos Air Quality Monitors equipped with PC interface to easily record, download, and graph data. The COM port is
More informationECIO40P ECIO28P ECRM40. Page 1. USB programmable microcontrollers. 0.6 DIP footprint. Supplied with a free version of Flowcode. E-blocks compatible
Page 1 USB programmable microcontrollers 0.6 DIP footprint Supplied with a free version of Flowcode E-blocks compatible ECIO40P ECIO28P ECRM40 trademarks of. Page 2 What does it do? ECIO devices are powerful
More informationioptron ASCOM 3.11 PC Control Application Note
ioptron ASCOM 3.11 PC Control Application Note ioptron ASCOM driver 3.11 provides a connection between an ioptron mount and a computer through serial/usb cable or wireless adapter. This version covers
More informationInstant Graphical User Interface Solutions Why you need a new User Interface
Instant Graphical User Interface Solutions Why you need a new User Interface Thanks to the iphone & Smart Phones Customer GUI expectations have changed Monochrome character LCDs and button style keypads
More informationMAX6683 Evaluation System/Evaluation Kit
19-2343; Rev 1; 3/07 MAX6683 Evaluation System/Evaluation Kit General Description The MAX6683 evaluation system (EV system) consists of a MAX6683 evaluation kit (EV kit) and a companion Maxim CMODUSB board.
More informationhttp://arduino.cc/en/main/robot?action=print
Pagina 1 di 7 Arduino : Main / Robot Arduino Robot Robot Top Robot Bottom Overview The Arduino Robot is the first official Arduino on wheels. The robot has two processors, one on each of its two boards.
More informationApplication Note: Connecting to a 2500 Series Processor using PLC Workshop
Application Note: Connecting to a 2500 Series Processor using PLC Workshop This application note will describe a step by step process for the three ways to connect to a 2500-CXXX with PLC Workshop. The
More informationJNIOR. Overview. Get Connected. Get Results. JNIOR Model 310. JNIOR Model 312. JNIOR Model 314. JNIOR Model 410
The INTEG is an Ethernet I/O (digital, analog) device that monitors and controls a small set of process signals. functions as both basic I/O for integration with another application or system AND as a
More informationSystem Firmware Update Instructions for AVH-4000NEX
System Firmware Update Instructions for AVH-4000NEX IMPORTANT Please download and print these firmware update instructions before downloading and installing the firmware update. It is important that you
More information3.2 inch QVGA TFT Color LCD User s Guide Version 1 & 2
3.2 inch QVGA TFT Color LCD - User s Guide 3.2 inch QVGA TFT Color LCD User s Guide Version 1 & 2 Give graphics and to your application! EA2-USG-0701 v2.1 Rev A 3.2 inch QVGA TFT Color LCD - User s Guide
More informationGuide to Installing BBL Crystal MIND on Windows 7
Guide to Installing BBL Crystal MIND on Windows 7 Introduction The BBL Crystal MIND software can not be directly installed on the Microsoft Windows 7 platform, however it can be installed and run via XP
More informationiloq P10S.10/20 Programming device User's Guide
iloq P10S.10/20 Programming device User's Guide CONTENTS CONTENTS... 2 GENERAL... 3 USING THE PROGRAMMING DEVICE... 5 Starting the programming device... 5 Programming of locks... 5 Programming of keys...
More informationIntroduction. Getting familiar with chipkit Pi
Overview: chipkit Pi Introduction chipkit Pi (Designed for Raspberry Pi) is the latest Arduino compatible chipkit platform from Microchip and element14. It features a 32 bit PIC32 microcontroller in a
More informationHow do I Check if My Computer is Compatible with Windows 7
How do I Check if My Computer is Compatible with Windows 7 Enterprise Computing & Service Management 1 Follow this link to download the Windows 7 Upgrade Advisor http://www.microsoft.com/windows/windows-7/get/upgrade-advisor.aspx
More informationApplication Note. Example of user log on Magelis HMI with XB5S5B2L2 biometric switch. Advanced Technical Support - Brazil. Version: 1.
Application Note Example of user log on Magelis HMI with XB5S5B2L2 biometric switch. Version: 1.0 Advanced Technical Support - Brazil Technical Specifications Hardware: Firmware: HMIGTO4310 XB5S5B2L2 Software:
More informationARDUINO SEVERINO SERIAL SINGLE SIDED VERSION 3 S3v3 (REVISION 2) USER MANUAL
ARDUINO SEVERINO SERIAL SINGLE SIDED VERSION 3 S3v3 (REVISION 2) USER MANUAL X1: DE-9 serial connector Used to connect computer (or other devices) using RS-232 standard. Needs a serial cable, with at least
More informationSMARTCARD XPRO. Preface. SMART ARM-based Microcontrollers USER GUIDE
SMART ARM-based Microcontrollers SMARTCARD XPRO USER GUIDE Preface Atmel SMARTCARD Xplained Pro is an extension board to the Atmel Xplained Pro evaluation platform. Atmel SMARTCARD Xplained Pro is designed
More informationUser s Manual of Board Microcontroller ET-MEGA2560-ADK ET-MEGA2560-ADK
User s Manual of Board Microcontroller ET-MEGA2560-ADK ET-MEGA2560-ADK Because Arduino that is the development project on AVR MCU as Open Source has been published, it is popular and widespread shortly.
More information5inch HDMI LCD User Manual
5inch HDMI LCD User Manual Features 800 480 high resolution Directly-pluggable into any revision of Raspberry Pi (only except the first generation Pi model B which requires an HDMI cable) Driver is provided
More informationBend Sensor USB User Guide
Bend Sensor USB User Guide Copyright 2015Flexpoint Sensor Systems, Inc. Page 1 of 7 SEG040404B Contents Page Introduction... 3 Kit Contents... 3 Installation instructions... 4 FlexpointBSV software...
More informationwww.dragino.com Yun Shield Quick Start Guide VERSION: 1.0 Version Description Date 1.0 Release 2014-Jul-08 Yun Shield Quick Start Guide 1 / 14
Yun Shield Quick Start Guide VERSION: 1.0 Version Description Date 1.0 Release 2014-Jul-08 Yun Shield Quick Start Guide 1 / 14 Index: 1 Introduction... 3 1.1 About this quick start guide... 3 1.2 What
More informationWIZ-Embedded WebServer User s Manual (Ver. 1.0)
[텍스트 입력] WIZ-Embedded WebServer User s Manual (Ver. 1.0) 2007 WIZnet Inc. All Rights Reserved. For more information, visit our website at www.wiznet.co.kr Document History Information Revision Data Description
More informationNetwork Attached Storage System Recovery Procedure
TECHNICAL BULLETIN Network Attached Storage System Recovery Procedure This document describes how to recover your Network Attached Storage (NAS) system if it has failed due to a problem with the internal
More informationUSER GUIDE. ZigBit USB Stick User Guide. Introduction
USER GUIDE ZigBit USB Stick User Guide Introduction This user guide describes how to get started with the Atmel ZigBit USB sticks. The ZigBit USB sticks is targeted for evaluating the USB features of the
More informationDownload ME6008M1 Event Log
Download ME6008M1 Event Log ManuFlo Flow Measurement Products A Division of Manu Electronics Pty Ltd 41 Carter Road, Brookvale NSW 2100 Australia Phone: +61 2 9938-1425 or +61 2 9905-4324 Fax: +61 2 9938-5852
More informationTesting Data Radio Modem with Serial Port Tool V1.20
Testing Data Radio Modem with Serial Port Tool V1.20 This document demonstrates how to test the communication of data radio modem with tool Advanced Serial Port Monitor from AGG Software and USB board.
More informationQUICK START GUIDE FOR DEMONSTRATION CIRCUIT 956 24-BIT DIFFERENTIAL ADC WITH I2C LTC2485 DESCRIPTION
LTC2485 DESCRIPTION Demonstration circuit 956 features the LTC2485, a 24-Bit high performance Σ analog-to-digital converter (ADC). The LTC2485 features 2ppm linearity, 0.5µV offset, and 600nV RMS noise.
More informationMonitorKey USB Driver Installation Instructions
MonitorKey USB Driver Installation Instructions The following procedure is used to install the drivers for the USB port of the EDI MonitorKey Programming Tool. If a serial version of the MonitorKey Programming
More informationGV-Keyboard. User's Manual V2.0
GV-Keyboard User's Manual V2.0 Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. 2007 GeoVision, Inc. All rights reserved.
More informationCypress CY7C64225 USB-to-UART Setup Guide Version 1.3
Cypress CY7C64225 USB-to-UART Setup Guide Version 1.3 Overview The Cypress CY7C64225 is a fully integrated USB-to-UART Bridge that provides a simple way of updating RS-232 based devices to USB with a minimal
More informationAndroid Controlled Based Interface
Android Controlled Based Interface Objective Fix Foba Build Rofi (Fifth Generation Robot) Develop, Build, and Implement a Dynamic Balanced Biped Robot Table of Contents Objective... 1 Android Controlled
More informationEasy! Smooth! GP-3300 Series->GP4000 Series Replacement Guidebook
Easy! Smooth! GP-3300 Series->GP4000 Series Replacement Guidebook 1 Fifth Edition Jul. 2012 Copyright 2012.7 Digital Electronics Corporation. All Rights Reserved. Preface This guidebook introduces the
More informationDigital Photo Bank / Portable HDD Pan Ocean E350 User Manual
Digital Photo Bank / Portable HDD Pan Ocean E350 User Manual Installing a hard disk 1. Power off the unit. 2. Remove the bottom cover from the unit by removing four screws. 3. Insert the 2.5 HDD to the
More informationGPS Fleet Setup Manual. Created by the team at FollowUs. A short documentation to get you started and setup with regards to the GPS Fleet
GPS Fleet Setup Manual Created by the team at FollowUs A short documentation to get you started and setup with regards to the GPS Fleet 8/2/2010 CE RoHS compliant A UK product 2 Important please read:-
More informationName Description P/N. Programmer Programmer with calibration function SDD-AAPNP. Parameter Min. Typ. Max. Notes. (Vo+ - Vo-) - Voltage
Description SDD-AAPNP is the programmer for non-dali Inventronics drivers, and the programmer and calibrator for the following intelligent controllers: SDD-AAPNx Dimming Signal Attenuator TDD-ANPNx Combo
More informationMicro HDMI to VGA with Audio Adapter. Quick Installation Guide. Introduction. Key Features and Benefits. System Requirements.
Introduction Micro HDMI to VGA with Audio Adapter Quick Installation Guide The Micro HDMI to VGA with Audio Adapter converts HDMI signals from a portable device, such as a laptop, smart phone or tablet
More informationTS1 Ultra Sonic Tank Sender Training. 27 November 2007
1 TS1 Ultra Sonic Tank Sender Training 27 November 2007 2 Topics TS1 Tank Sender TS1-PK Programming Kit TS1 Programming Software Programming TS1 Troubleshooting 3 TS1 TS1 is an advanced tank sender based
More informationimageprograf Direct Print & Share Guide
imageprograf Direct Print & Share Guide imageprograf Direct Print & Share Guide Ver. 2.0 Canon Inc. 1. Features of imageprograf Direct Print & Share The features of imageprograf Direct Print & Share are
More informationUSB PC Adapter V4 Configuration
Programming PC adapter V4 USB PC Adapter V4 Configuration PC adapter with USB cable Flat Ribbon Cable Power Supply Unit Device Driver General The USB PC adapter V4 is used for communication between a PC
More informationISP Engineering Kit Model 300
TM ISP Engineering Kit Model 300 December 2013 Model 300 Overview The Model 300 programmer supports JTAG programming of all Lattice devices that feature non-volatile configuration elements. The Model 300
More informationVmed QUICKSTART PC-DISPLAY INSTALLATION & PC-Display and Bluetooth Instructions
QUICKSTART PC-DISPLAY INSTALLATION & BLUETOOTH SETUP INSTRUCTIONS Vmed PC-Display and Bluetooth Instructions This is the Quick Start manual for PC-Display software. The complete software user manual for
More informationSoftware Manual LSeries Manager V1.2 Software Manual June 18, 2013. LSeries Manager 1.2. Software Manual
LSeries Manager 1.2 Software Manual Website: www.arri.com/service-lighting Page 1 of 14 Table of Contents 1 Download and Installation... 3 2 Start the LSeries Manager... 4 3 Lamphead Overview... 5 4 DMX
More informationGetting Started with the LabVIEW Embedded Module for ARM Microcontrollers 1.0 For the Keil MCB2300
Getting Started with the LabVIEW Embedded Module for ARM Microcontrollers 1.0 For the Keil MCB2300 Contents The LabVIEW Embedded Module for ARM Microcontrollers is a comprehensive graphical development
More informationUPiS - Uninterruptible Power intelligent Supply
UPiS - Uninterruptible Power intelligent Supply www.pimodules.com Introduction The UPiS is an Advanced Powering add-on Module for the RaspberryPi that adds a wealth of additional features to the powering
More informationPLC training panel (Twido version)
PLC training panel (Twido version) User manual Name School of Trades Produced by: GJR October 2012 Colour leaves: 9 BW leaves: 2 Cover colour: White Cover image: G.J.Rogerson Acknowledgments: Much of the
More informationSystem Firmware Update (Version 1.11) Instructions for Pioneer AppRadio 4 (SPH-DA120) In-dash Multimedia Receiver
System Firmware Update (Version 1.11) Instructions for Pioneer AppRadio 4 (SPH-DA120) In-dash Multimedia Receiver IMPORTANT Please download and print these Firmware Update instructions before downloading
More informationConnecting your Omega/BetaPAT PLUS to a PC via a USB
Connecting your Omega/BetaPAT PLUS to a PC via a USB Install software Windows XP and below Insert the disc into your computers disc drive and run through the setup wizard. Windows Vista & 7 1. Insert the
More information1. Open the battery compartment as shown in the image.
This Quick User Guide helps you get started with the IRIScan Book 3 scanner. This scanner is supplied with the software applications Readiris Pro 12, IRIScan Direct and IRISCompressor. Corresponding Quick
More informationYoungPOS Presentation. www.youngpos.vn
YoungPOS Presentation WHO WE ARE? Innovators in the field of Hospitality and Retails POS system (hardware and software), Young POS have built a network of over 10.000 customer over the South East Asia
More informationKeep it Simple Timing
Keep it Simple Timing Support... 1 Introduction... 2 Turn On and Go... 3 Start Clock for Orienteering... 3 Pre Start Clock for Orienteering... 3 Real Time / Finish Clock... 3 Timer Clock... 4 Configuring
More informationXPanel V2. Remote Control Panel. User Manual. XILICA Audio Design
XPanel V2 Remote Control Panel User Manual XILICA Audio Design Important Safety Instructions 1. READ THESE INSTRUCTIONS All the safety and operating instructions should be read before the product is operated.
More informationAR1100 Resistive Touch Screen Controller Guide
AR1100 Resistive Touch Screen Controller Guide Created by lady ada Last updated on 2015-06-30 01:40:06 PM EDT Guide Contents Guide Contents Overview Calibrating the AR1100 Download and Install AR1100 Configuration
More informationAlcatel-Lucent OmniPCX Enterprise Communication Server TA-MMK (MMK V2)
Alcatel-Lucent OmniPCX Enterprise Communication Server TA-MMK (MMK V2) Legal notice: Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are
More information