Build Specifications MTB Hubs

Transcription

1 uild Specifications MT Hubs Important information about hub compatibility This document is intended to communicate hub dimensions necessary for building wheels with SRM hubs. For more detailed information, please contact your SRM c Manager.

2 Table of ontents PRITIV STRING HU...4 X0 FRONT HU WITH SI SWP SYMMTRIL N PS... 5 OOST 110 FRONT HU WITH SI SWP SYMMTRIL N PS...6 X0 RR HU WITH SI SWP SYMMTRIL N PS... 7 OOST 148 RR HU WITH SI SWP SYMMTRIL N PS... 8 X9-20X110 FRONT...9 X9-15X100 FRONT X9-12X142 RR X9-12X135 RR...12 X7/X9 QR...13 MTH 716/

3 WRNING Use only 10 mm length rotor bolts. Rotor bolts longer than 10 mm will not secure the rotor to the wheel hub. 10 mm

4 Predictive Steering hub.1.1 HU SPIFITIONS (in millimeters, unless otherwise specified).1.2 (spoke hole diameter) 32 or o NOT use a radial lacing pattern as it may damage your hubs. Radial lacing will void your warranty. 4

5 X0 Front Hub with Side Swap Symmetrical nd aps Quick Release 15 x 100 mm Thru xle Quick Release with Torque aps Quick Release with Torque aps are compatible with RockShox Quick Release forks only. 20 x 110 mm Thru xle HU SPIFITIONS (in millimeters, unless otherwise specified) (spoke hole diameter) 5 32 or o NOT use a radial lacing pattern as it may damage your hubs. Radial lacing will void your warranty.

6 oost 110 Front Hub with Side Swap Symmetrical nd aps Quick Release 15 x 110 mm Thru xle 15 x 110 mm Thru xle with Torque aps HU SPIFITIONS (in millimeters, unless otherwise specified) (spoke hole diameter) o NOT use a radial lacing pattern as it may damage your hubs. Radial lacing will void your warranty.

7 X0 Rear Hub with Side Swap Symmetrical nd aps Quick Release 12 x 135 mm Thru xle 12 x 142 mm Thru xle HU SPIFITIONS (in millimeters, unless otherwise specified) (spoke hole diameter) 32 or These specificaions are also applicable to hubs with an X driver body. o NOT use a radial lacing pattern as it may damage your hubs. Radial lacing will void your warranty. 7

8 oost 148 Rear Hub with Side Swap Symmetrical nd aps 12 x 148 mm Thru xle HU SPIFITIONS (in millimeters, unless otherwise specified) (spoke hole diameter) These specificaions are also applicable to hubs with an X driver body. o NOT use a radial lacing pattern as it may damage your hubs. Radial lacing will void your warranty. 8

9 X9-20x110 front.1.2 HU SPIFITIONS (in millimeters, unless otherwise specified).1.2 (spoke hole diameter) o NOT use a radial lacing pattern as it may damage your hubs. Radial lacing will void your warranty. 9

10 X9-15x100 front HU SPIFITIONS (in millimeters, unless otherwise specified) (spoke hole diameter) o NOT use a radial lacing pattern as it may damage your hubs. Radial lacing will void your warranty. 10

11 X9-12x142 rear HU SPIFITIONS (in millimeters, unless otherwise specified) (spoke hole diameter) o NOT use a radial lacing pattern as it may damage your hubs. Radial lacing will void your warranty. 11

12 X9-12x135 rear (spoke hole diameter) o NOT use a radial lacing pattern as it may damage your hubs. Radial lacing will void your warranty. 12

13 X7/X9 QR FRONT RR HU SPIFITIONS (in millimeters, unless otherwise specified).1.2 (spoke hole diameter) Front Rear o NOT use a radial lacing pattern as it may damage your hubs. Radial lacing will void your warranty

14 MTH 716/ x 100 mm Thru xle 12 x 142 mm Thru xle HU SPIFITIONS (in millimeters, unless otherwise specified) (spoke hole diameter) Front Rear o NOT use a radial lacing pattern as it may damage your hubs. Radial lacing will void your warranty

15 OOST 110/ x 110 mm Thru xle 12 x 148 mm Thru xle HU SPIFITIONS (in millimeters, unless otherwise specified) (spoke hole diameter) Front Rear o NOT use a radial lacing pattern as it may damage your hubs. Radial lacing will void your warranty

16 MTH 406/ FRONT RR HU SPIFITIONS (in millimeters, unless otherwise specified).1.2 (spoke hole diameter) Front Rear o NOT use a radial lacing pattern as it may damage your hubs. Radial lacing will void your warranty

17 MTH 306 FRONT RR HU SPIFITIONS (in millimeters, unless otherwise specified) (spoke hole diameter) Front Rear o NOT use a radial lacing pattern as it may damage your hubs. Radial lacing will void your warranty. 17

18 MTH 300 FRONT RR HU SPIFITIONS (in millimeters, unless otherwise specified) (spoke hole diameter) Front Rear o NOT use a radial lacing pattern as it may damage your hubs. Radial lacing will void your warranty. 18

19 opyright 2014 SRM, LL Gen Rev