TUFTS TEXT. In this tutorial, we ll model 3-dimensional text (Tufts University) and animate it around the Tufts University Seal.
|
|
|
- Norma James
- 7 years ago
- Views:
Transcription
1 Course: 3D Design Title: Tufts Text Blender: Version 2.6X Level: Beginning Author; Neal Hirsig (May 2012) TUFTS TEXT In this tutorial, we ll model 3-dimensional text (Tufts University) and animate it around the Tufts University Seal. Open Blender. Select the default cube and delete it. Switch to Front View. Place your 3D cursor in the center of the display. Press SHIFT-A and add a Cylinder object. Press the NKEY to display the properties panel on the right (if it is not already displayed). Set the X rotation for the cylinder to 90.
2 TAB into Edit Mode. Go to Wireframe mode (ZKEY). Press NUMPAD-5 to go to Orthographic mode (instead of Perspective mode). Switch to Top View. Press the AKEY to deselect the vertices. Use the Box Select (BKEY) to select the top vertices. Use the Green Transform Widget to move the vertices down to create a small coin-like object. Switch to Front View. Press the AKEY to deselect the vertices. TAB out of Edit Mode. In the Transform Properties Panel name this object Seal.
3 Set the Location X, Y and Z at 0. Press the AKEY to deselect the Seal. Place your 3D cursor in the center of the Seal. Press SHIFT-A and add a Text object.
4 In the properties panel, set the X rotation to 90 The letters Text appears on the display spelling out the word TEXT.
5 TAB into Edit Mode. Use your Backspace key (or Delete key on a MAC) to backspace over the text. Then type in capital letters TUFTS UNIVERSITY. TAB out of Edit Mode. Blender uses a default font for text objects. However we can change the font to any PostScript Type 1 or True Type font. We will add a special Tufts University font to the list of Blender fonts. The name of this font file is TUFTS.PFB and can be downloaded HERE. Go to the Object Data Editor. In the Fnont Panel, click on the Folder icon to the right of the Regular font. This opens up Blender s file page. Locate the TUFTS.PFB font file on your computer and select it.
6 Click on the Open Font button. This loads the font into Blender and applies it to the Tufts University text object. In the Paragraph Panel change the Character Spacing setting to 1.1. This will move the letters a little bit apart from each other.
7 We want to curve the text in a circle around the seal. To do this we must first make a curved path. Press the AKEY to deselect the Text. Place your 3D cursor in the center of the Seal. Press SHIFT-A and add a Bezier Circle. In the properties panel on the right, set the X rotation to 90. Press the SKEY (Scale) and scale the circle as shown below.
8 In the Properties Panel name this object path Set the LOC X, Y and Z at 0. Select the Text object. In the Font panel (of the Object Data editor) click on the Text on Curve box and select the path object.
9 This displaces the Text along the Bezier circle s curve.
10 Select the Path object. Press the SKEY (Scale) and scale it up a bit as shown below. Select the Text object. In the Object Data editor / Paragraph panel select Center. This will center the Text object around the path.
11 The text is still only 2 dimensional (but renderable). To give it more dimension in the Geometry panel set the Extrude to.1 Switch to Top View. Use the Green 3D Widget arrow to move the Text object so it is on top of the Seal.
12 In the Properties Panel name this object Tufts Text. We want to animate this Text object later, so we need to convert it to a Mesh object and get rid of the Path object. With the Tufts Text object selected press ALT-C and select Convert To - Mesh from Curve.
13 We no longer need the path object. Select the Path object and delete it. Press the ZKEY (Shading) and rotate you view to look at the model. Save your Blend file (CTRL-W). Animation: We want to animate the Tufts Text object around the Seal object. Switch to Front View. Make sure the current frame is frame 1. Select the Tufts Text object if not already selected. Press the IKEY (Insert) and insert a Rotation key frame.
14 This records the rotation of the Tufts Text object in frame 1. Set the current frame to 150. In the Properties Panel set the Y Rotation to 360 degrees.
15 Press the IKEY (Insert). Insert a Rotation keyframe. This records the rotation of the Tufts Text object in frame 150. In the Timeline Window set the End frame to 150. In the Timeline Window press the play animation icon. This plays the animation in the 3D viewport. You can stop the playback of the animation by pressing the stop icon or pressing the ESC (Escape) key. Set the current frame back to 1.
16 Save your Blend file. Camera: Rotate your 3D display to show the scene dimensionally in the center as shown below. Press CTRL-ALT-NUMPAD-0 (align camera) This will align your camera object to the view.
17 Note: You may have to go back and forth from your 3D view (click your center mouse button) to setting the camera view. Pressing NUMPAD-0 will always show you the camera view. You can also just select the camera object, move it or rotate it to establish a good camera view. Lighting: Go to front view. Select the default point lamp and delete it. Place your cursor below the Tufts Text object and add Hemi Lamp object.
18 Go to the Object Data Editor. In the Lamp panel, set the Energy level to.5
19 With the Hemi lamp selected, press SHIFT-D (Duplicate) and make a duplicate Hemi lamp object. Left-click to set and move the duplicate to the right a bit. Make another duplicate Hemi lamp and move it to the left a bit. Rotate (RKEY) tow of the Hemi lamps as shown below. Render the scene.
20 My TuftsText object is a bit too large to fit the entire circle animation within the camera frame so I will select it and scale it down a bit. The rim of the Seal object is also a bit too wide. Go to Top view. Select the Seal object. Go to wireframe mode (ZKEY). TAB into edit mode. Box select the top vertices and move them closer to the other set. Then TAB out of edit mode and center the Seal in the Tufts Text object as shown below.
21 ZKEY back to solid shading mode, go to front view and Render the scene. Save your Blend file. Materials: We will add a textured material to the Seal object using an image file named TuftsSeal.png. You can download this image file HERE. Select the Seal object. Go to the materials editor.
22 We will be placing two materials on this object. Click the Plus sign to add a second material slot. Select the second material channel and name it Tufts Go to the Texture Editor. Click New and name the texture TuftsSeal.
23 Change the Type to Image or Movie. In the Image panel, click on the Open button.
24 This opens Blender s File page. Locate the TuftsSeal.png file on your computer and select it. Click on the Open Image button. Go back to the Materials editor. With the Seal object selected, TAB into edit mode. Go to wireframe mode (ZKEY). Deselect the vertices. Rotate your display to a more dimensional view. Go to Face select mode. CTRL-TAB
25 Select the front face of the Seal object.
26 In the Material editor, with the Tufts material channel selected, press the Assign button. This assigns the Tufts material (that has the TuftsSeal image texture) to the front face of the Seal object.
27 Deselect the face (AKEY). TAB back to object mode. ZKEY to solid shading mode. In the Specular panel set the Hardness to 211 Now select the first (unnamed) material channel. Press the New button and name this material channel Rim and Back Click on the Diffuse color swatch. Set the R = 1, G=.820 and B=.168 making a gold diffuse color.
28 Click on the Specular color swatch. Set the R=1, G-.925, and B=.609
29 Check Mirror checkbox (activating it). Click on the mirror color swatch and set R=1, G=.820 and B=.165
30 Set the Mirror reflectivity to.2 Render the scene.
31 Save your Blend file. Select the TuftsText object. Go to the Material Editor. We will use one of the material channels we used on the Seal object. Click on the Click on the Browse Material button to the left of the New button and select Text and Rim.
32 This will assign the previously made material to the TuftsText object. Render the scene.
33 Save your Blend file. World Background: Press the AKEY so nothing is selected. Go to the World Editor. Now go to the Texture Editor We will place an image of clouds in the Background. The image file we will use is named Clouds.jpg. This file can be downloaded HERE. Press the New Button and name this texture CloudBackground. Change the Type to Image or Movie. Click on the Open button. This displays Blender s File page. Locate the Clouds.jpg image on your computer and press the Open Image button. In the Influence panel, uncheck the Blend checkbox and check the Horizon checkbox.
34 In the Preview panel select the World button. Render the scene.
35 Save your Blend file. Rendering the Animation: Go to the Render Editor. Scroll down to the Output panel and click on the folder icon as shown below. This displays Blender s file page. Decide where you would like the video file to be located (I choose the desktop) and then name the file Tufts Text Video (You do not have to add a file extension to the name).
36 Click on the Accept button. This sets the name and file saving path in the Output panel of the Render Editor. Click on the PNG (which is really the file type button) and select MPEG
37 Note: You can choose a different video file type if you want. Scroll up to the Dimensions Panel. Note that the default dimensions of the video (or the image) is 1920 pixels by 1080 pixels at 50%. This means the size of the video (or image) will be rendered at 960 x 540 pixels. You can change this size by reducing the % slider. At 25%, the rendered video will be 540 x 270 pixels. The larger the render dimensions, and the more complex the modeling, animation, texturing and especially the lighting, the longer it will take to render. To render the video file, click on the Animation button.
38 This will render each frame in order in the UV Image Editor. This may take a long time. When the rendering is complete. You should have a video file (of your chosen file type) located on your desktop (or wherever you set the video to be rendered to.) If you choose MPEG as the file type, the video file is, by default, named Tufts Text Video dvd. You can rename this to TuftsText.mpeg. Save your Blend file. You can view this Video file HERE. A completed copy of this tutorial.blend file named TuftsText_Complete.blend: can be found HERE.
Course: 3D Design Title: Deciduous Trees Blender: Version 2.6X Level: Beginning Author; Neal Hirsig (nhirsig@tufts.edu) (June 2012) Deciduous Trees
Course: 3D Design Title: Deciduous Trees Blender: Version 2.6X Level: Beginning Author; Neal Hirsig (nhirsig@tufts.edu) (June 2012) Deciduous Trees In general, modeling trees is a long and somewhat tedious
The Rocket Steam Locomotive - Animation
Course: 3D Design Title: Rocket Steam Locomotive - Animation Blender: Version 2.6X Level: Beginning Author; Neal Hirsig (nhirsig@tufts.edu) (May 2012) The Rocket Steam Locomotive - Animation In this tutorial
Castle Modeling. In this PDF tutorial we will be modeling a simple castle as pictured above.
Course: 3D Design Title: Castle Modeling Blender: Version 2.6X Level: Beginning Author; Neal Hirsig (nhirsig@tufts.edu) May, 2012 This tutorial assumes that you already know how to: Display orthographic
Intro to 3D Animation Using Blender
Intro to 3D Animation Using Blender Class Instructor: Anthony Weathersby Class Objectives A primer in the areas of 3D modeling and materials An introduction to Blender and Blender s toolset Course Introduction
My Materials. In this tutorial, we ll examine the material settings for some simple common materials used in modeling.
Course: 3D Design Title: My Materials Blender: Version 2.6X Level: Beginning Author; Neal Hirsig (nhirsig@tufts.edu) (May 2012) My Materials In this tutorial, we ll examine the material settings for some
Blender Notes. Introduction to Digital Modelling and Animation in Design Blender Tutorial - week 9 The Game Engine
Blender Notes Introduction to Digital Modelling and Animation in Design Blender Tutorial - week 9 The Game Engine The Blender Game Engine This week we will have an introduction to the Game Engine build
Chapter 9- Animation Basics
Basic Key-framing and Auto Key-framing Now that we know how to make stuff and make it look good, it s time to figure out how to move it around in your scene. If you're familiar with older versions of Blender,
IT 386: 3D Modeling and Animation. Review Sheet. Notes from Professor Nersesian s IT 386: 3D Modeling and Animation course
IT 386: 3D Modeling and Animation Review Sheet Sources: Notes from Professor Nersesian s IT 386: 3D Modeling and Animation course Notes from CannedMushrooms on YouTube Notes from Digital Tutors tutorial
Blender 3D Animation
Bachelor Maths/Physics/Computer Science University Paris-Sud Digital Imaging Course Blender 3D Animation Christian Jacquemin Introduction to Computer Animation Animation Basics animation consists in changing
Blender 3D: Noob to Pro/Die Another Way
Blender 3D: Noob to Pro/Die Another Way From Wikibooks, the open-content textbooks collection < Blender 3D: Noob to Pro Next Page: Edit Mode HotKeys Review Previous Page: Penguins from spheres This tutorial
Working With Animation: Introduction to Flash
Working With Animation: Introduction to Flash With Adobe Flash, you can create artwork and animations that add motion and visual interest to your Web pages. Flash movies can be interactive users can click
Movie Maker 2 Beginning
Movie Maker 2 Beginning Quick Overview...3 Preparing a Folder...3 Collecting Resources...3 Pictures...4 Screen Resolution...4 Starting Windows Movie Maker...4 Which Version?...4 Windows Movie Maker 2 Window...4
No restrictions are placed upon the use of this list. Please notify us of any errors or omissions, thank you, support@elmcomputers.
This list of shortcut key combinations for Microsoft Windows is provided by ELM Computer Systems Inc. and is compiled from information found in various trade journals and internet sites. We cannot guarantee
SimLab 3D PDF. Settings
SimLab 3D PDF Settings 3D PDF Settings PDF Settings dialog enables the user to control the exported 3D PDF file(s), from SimLab Composer and other 3D SimLab plugins. In SimLab Composer the dialog can be
Tutorial. Introduction to Windows Movie Maker 2.1. A Hands-on Workshop. from the Academic Technology Center. Distributed Learning Services, CIT
Tutorial Introduction to Windows Movie Maker 2.1 A Hands-on Workshop from the Academic Technology Center Distributed Learning Services, CIT Adapted with permission by Waynesburg College AAM Copyright 2005
Tutorial 13: Object Animation
Tutorial 13: Object Animation In this tutorial we will learn how to: Completion time 40 minutes Establish the number of frames for an object animation Rotate objects into desired positions Set key frames
Digital Video Capture and Edit with imovie HD 6.0.2
RESEARCH AND INSTRUCTIONAL SUPPORT REVISED: AUGUST 2006 Project Management Digital Video Capture and Edit with imovie HD 6.0.2 Plan out your time and process before beginning the capture and edit. A few
Microsoft Office PowerPoint 2013
Microsoft Office PowerPoint 2013 Navigating the PowerPoint 2013 Environment The Ribbon: The ribbon is where you will access a majority of the commands you will use to create and develop your presentation.
Adding Animation With Cinema 4D XL
Step-by-Step Adding Animation With Cinema 4D XL This Step-by-Step Card covers the basics of using the animation features of Cinema 4D XL. Note: Before you start this Step-by-Step Card, you need to have
Adobe Illustrator CS5 Part 1: Introduction to Illustrator
CALIFORNIA STATE UNIVERSITY, LOS ANGELES INFORMATION TECHNOLOGY SERVICES Adobe Illustrator CS5 Part 1: Introduction to Illustrator Summer 2011, Version 1.0 Table of Contents Introduction...2 Downloading
PowerPoint 2013: Basic Skills
PowerPoint 2013: Basic Skills Information Technology September 1, 2014 1 P a g e Getting Started There are a variety of ways to start using PowerPoint software. You can click on a shortcut on your desktop
SketchUp Instructions
SketchUp Instructions Every architect needs to know how to use SketchUp! SketchUp is free from Google just Google it and download to your computer. You can do just about anything with it, but it is especially
Tutorial for Basic Editing in Adobe Premiere Pro CS5
Tutorial for Basic Editing in Adobe Premiere Pro CS5 Interface Overview Highlighting Key Tools - Project Files This is where all the files you import into Premiere are located. This includes movie files,
Tutorial: Biped Character in 3D Studio Max 7, Easy Animation
Tutorial: Biped Character in 3D Studio Max 7, Easy Animation Written by: Ricardo Tangali 1. Introduction:... 3 2. Basic control in 3D Studio Max... 3 2.1. Navigating a scene:... 3 2.2. Hide and Unhide
Introduction to Microsoft Word 2003
Introduction to Microsoft Word 2003 Sabeera Kulkarni Information Technology Lab School of Information University of Texas at Austin Fall 2004 1. Objective This tutorial is designed for users who are new
Figure 3.5: Exporting SWF Files
Li kewhatyou see? Buyt hebookat t hefocalbookst or e Fl ash + Af t eref f ect s Chr i sjackson ISBN 9780240810317 Flash Video (FLV) contains only rasterized images, not vector art. FLV files can be output
Blender Tutorial Hair «Bear» Version 05 2015 Blender 2.73 zingg formd daddelbox GmbH
Blender Tutorial Hair «Bear» Version 05 2015 Blender 2.73 zingg formd daddelbox GmbH File new, Reload Start Up File Right click the cube and DELETE it. Add a sphere. Add, Mesh, UV Sphere, this will be
Blender to Google Earth Workshop The Mayan Temple of Kukulkan, Chichén Itzá, Mexico
Blender to Google Earth Workshop The Temple of Kukulkan, Chichén Itzá, Mexico Fifth Blender Conference October 20-22, 2006 De Waag Amsterdam The Netherlands Workshop Files: Blender_GoogleEarth.zip Author:
ZoomText Hotkeys. AppReader and DocReader Hotkeys (Magnifier/Reader only)
ZoomText Hotkeys The following tables list the command names and default assignments for all ZoomText hotkeys (by Hotkey Group). Hotkey assignments can be changed in the Hotkeys dialog box. Note: AppReader
Maya 2014 Basic Animation & The Graph Editor
Maya 2014 Basic Animation & The Graph Editor When you set a Keyframe (or Key), you assign a value to an object s attribute (for example, translate, rotate, scale, color) at a specific time. Most animation
AR-media TUTORIALS OCCLUDERS. (May, 2011)
AR-media TUTORIALS OCCLUDERS (May, 2011) Copyright Copyright 2008/2011 Inglobe Technologies S.r.l. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in
Camtasia Recording Settings
Camtasia Recording Settings To Capture Video Step 1: Resolution and Recording Area In the select area section, you can choose either to record the full screen or a custom screen size. Select the dropdown
Creating Your Own 3D Models
14 Creating Your Own 3D Models DAZ 3D has an extensive growing library of 3D models, but there are times that you may not find what you want or you may just want to create your own model. In either case
Flash MX Image Animation
Flash MX Image Animation Introduction (Preparing the Stage) Movie Property Definitions: Go to the Properties panel at the bottom of the window to choose the frame rate, width, height, and background color
Choosing your Preferred Colours in Windows
Choosing your Preferred Colours in Windows Some people will occasionally find certain text and background combinations difficult to read, while others prefer to always have a certain colour combination
Overview of the Adobe Flash Professional CS6 workspace
Overview of the Adobe Flash Professional CS6 workspace In this guide, you learn how to do the following: Identify the elements of the Adobe Flash Professional CS6 workspace Customize the layout of the
How to create buttons and navigation bars
How to create buttons and navigation bars Adobe Fireworks CS3 enables you to design the look and functionality of buttons, including links and rollover features. After you export these buttons from Fireworks,
Lab7 : Putting Everything Together
1 Lab7 : Putting Everything Together Introduction In the previous six OpenGL tutorials you ve learned to use textures, programmable shaders, basic shading, cube-mapping, render-to-texture and shadow maps.
Using HDR Panoramas. Dr Ryan Southall - School of Architecture & Design, University of Brighton.
Using HDR Panoramas Dr Ryan Southall - School of Architecture & Design, University of Brighton. Introduction The LightLab project attempts to improve the integration of technology into design education
Creating tables of contents and figures in Word 2013
Creating tables of contents and figures in Word 2013 Information Services Creating tables of contents and figures in Word 2013 This note shows you how to create a table of contents or a table of figures
Lesson 7 - Creating Animation II
Lesson 7 - Creating Animation II A. Motion-Tweened Animation With motion tweening, you can easily create motion effects for the objects in your Flash movies. Kites flying, balls bouncing, rocks rolling
Introduction to OpenOffice Writer 2.0 Jessica Kubik Information Technology Lab School of Information University of Texas at Austin Fall 2005
Introduction to OpenOffice Writer 2.0 Jessica Kubik Information Technology Lab School of Information University of Texas at Austin Fall 2005 Introduction: OpenOffice Writer is a word processing application
OneNote 2016 Tutorial
VIRGINIA TECH OneNote 2016 Tutorial Getting Started Guide Instructional Technology Team, College of Engineering Last Updated: Spring 2016 Email tabletteam@vt.edu if you need additional assistance after
NIS-Elements Viewer. User's Guide
NIS-Elements Viewer User's Guide Publication date 10.09.2013 v. 4.20.00 Laboratory Imaging, s. r. o., Za Drahou 171/17, CZ - 102 00 Praha 10 No part of this publication may be reproduced or transmitted
Kodu Curriculum: Getting Started with Keyboard and Mouse
Kodu Curriculum: Getting Started with Keyboard and Mouse PC Requirements 1. Kodu requires a Windows Operating System 2. DirectX9 graphics 3. Shader Model 2.0 or greater. How to Check Your DirectX Version
WHAT S NEW IN WORD 2010 & HOW TO CUSTOMIZE IT
WHAT S NEW IN WORD 2010 & HOW TO CUSTOMIZE IT The Ribbon... 2 Default Tabs... 2 Contextual Tabs... 2 Minimizing and Restoring the Ribbon... 3 Customizing the Ribbon... 3 A New Graphic Interface... 5 Live
itunes Basics Website: http://etc.usf.edu/te/
Website: http://etc.usf.edu/te/ itunes is the digital media management program included in ilife. With itunes you can easily import songs from your favorite CDs or purchase them from the itunes Store.
User Guide. March 2015. Moovly.com. Discover all Moovly Features and learn how to create videos like a Pro!
User Guide March 2015 Discover all Moovly Features and learn how to create videos like a Pro! Moovly.com 1. Getting Started... 4 1.1. Technical requirements... 4 1.2. Moovly Editor Overview... 4 1.3. Making
Word 2007 WOWS of Word Office 2007 brings a whole new basket of bells and whistles for our enjoyment. The whistles turn to wows.
WOWS of Word Office brings a whole new basket of bells and whistles for our enjoyment. The whistles turn to wows. gfruth@wm.edu Templates Click on the Office Button PDF and select New. You can now change
PowerPoint 2007 Basics Website: http://etc.usf.edu/te/
Website: http://etc.usf.edu/te/ PowerPoint is the presentation program included in the Microsoft Office suite. With PowerPoint, you can create engaging presentations that can be presented in person, online,
Creating a Poster in PowerPoint 2010. A. Set Up Your Poster
View the Best Practices in Poster Design located at http://www.emich.edu/training/poster before you begin creating a poster. Then in PowerPoint: (A) set up the poster size and orientation, (B) add and
Manual. OIRE Escuela de Profesiones de la Salud. Power Point 2007
Power Point 2007 Manual OIRE Escuela de Profesiones de la Salud Power Point 2007 2008 The New Power Point Interface PowerPoint is currently the most common software used for making visual aids for presentations.
Anime Studio Debut vs. Pro
vs. Animation Length 2 minutes (3000 frames) Unlimited Motion Tracking 3 Points Unlimited Audio Tracks 2 Tracks Unlimited Video Tracks 1 Track Unlimited Physics No Yes Poser scene import No Yes 3D layer
MICROSOFT OUTLOOK 2010 WORK WITH CONTACTS
MICROSOFT OUTLOOK 2010 WORK WITH CONTACTS Last Edited: 2012-07-09 1 Access to Outlook contacts area... 4 Manage Outlook contacts view... 5 Change the view of Contacts area... 5 Business Cards view... 6
Using Impatica for Power Point
Using Impatica for Power Point What is Impatica? Impatica is a tool that will help you to compress PowerPoint presentations and convert them into a more efficient format for web delivery. Impatica for
Why Use OneNote? Creating a New Notebook
Why Use OneNote? OneNote is the ultimate virtual notebook that enables users to create notes in various formats, shares those notes, sync those notes with the cloud and collaborate with others. You can
Using Windows Movie Maker to Create Movies
Using Windows Movie Maker to Create Movies Windows Movie Maker 2.1 is free! It comes with Windows XP or can be downloaded from the Microsoft Website. http://www.microsoft.com/windowsxp/downloads/updates/moviemaker2.mspx
Creating a table of contents quickly in Word
Creating a table of contents quickly in Word This note shows you how to set up a table of contents that can be generated and updated quickly and easily, even for the longest and most complex documents.
Microsoft Office 2010: Introductory Q&As PowerPoint Chapter 1
Microsoft Office 2010: Introductory Q&As PowerPoint Chapter 1 Are the themes displayed in a specific order? (PPT 6) Yes. They are arranged in alphabetical order running from left to right. If you point
Adobe Captivate Tips for Success
Adobe Captivate Tips for Success Before you begin editing your Captivate project, make sure you create a back up copy of your.cp file in case you delete something you need later. 1 Before You Record Your
Sage Accountants Business Cloud EasyEditor Quick Start Guide
Sage Accountants Business Cloud EasyEditor Quick Start Guide VERSION 1.0 September 2013 Contents Introduction 3 Overview of the interface 4 Working with elements 6 Adding and moving elements 7 Resizing
Generative Drafting. Page 1 1997 2001 DASSAULT SYSTEMES. IBM Product Lifecycle Management Solutions / Dassault Systemes
Generative Drafting Page 1 Tutorial Objectives Description This Tutorial is an introduction to Generative Drafting. Message To show how CATIA V5 allows the user to automatically generate associative drafting
Character Creation You can customize a character s look using Mixamo Fuse:
Using Mixamo Fuse, Mixamo, and 3ds Max, you can create animated characters for use with FlexSim. Character Creation You can customize a character s look using Mixamo Fuse: After creating the character,
Microsoft Windows Movie Maker
Microsoft Windows Movie Maker Created by: Julia Zangl Colby, Technology Integration Specialist Plymouth Public Schools Summer 2008 Sources Available on my Wiki: http://juliazanglcolby.wikispaces.com/moviemaking
USER GUIDE. Let s get started! Notepad Basics... 2. Notepad Settings... 4. Keyboard Editor... 6. Getting Organized... 9. Sharing your work...
USER GUIDE Notepad Basics... 2 Notepad Settings... 4 Keyboard Editor... 6 Getting Organized... 9 Sharing your work... 11 Importing a Document... 12 Let s get started! 1 Page Notepad Basics Create a Notepad:
Highlight from current position to end of line. Move one word to the left at a time Move one word to the right at a time
BASIC SHORTCUT KEYS Alt + F Alt + E F1 Ctrl + A Ctrl + X Shift + Del Ctrl + C Ctrl + Ins Ctrl + V Shift + Ins Home Ctrl + Home End Ctrl + End Shift + Home Shift + End Ctrl + Ctrl + File menu options in
Sample Table. Columns. Column 1 Column 2 Column 3 Row 1 Cell 1 Cell 2 Cell 3 Row 2 Cell 4 Cell 5 Cell 6 Row 3 Cell 7 Cell 8 Cell 9.
Working with Tables in Microsoft Word The purpose of this document is to lead you through the steps of creating, editing and deleting tables and parts of tables. This document follows a tutorial format
The main imovie window is divided into six major parts.
The main imovie window is divided into six major parts. 1. Project Drag clips to the project area to create a timeline 2. Preview Window Displays a preview of your video 3. Toolbar Contains a variety of
Word Processing programs and their uses
Word Processing programs and their uses An application that provides extensive tools for creating all kinds of text based programs. They are not limited to working with text and enable you to add images
Maya 2014 Still Life Part 1 Texturing & Lighting
Maya 2014 Still Life Part 1 Texturing & Lighting Realistic lighting and texturing is the key to photorealism in your 3D renders. Objects and scenes with relatively simple geometry can look amazing with
Microsoft PowerPoint 2007
Microsoft PowerPoint 2007 PowerPoint is currently the most common software used for making visual aids for presentations. It has been redesigned for the 2007 release with a much more user-friendly and
The following is an overview of lessons included in the tutorial.
Chapter 2 Tutorial Tutorial Introduction This tutorial is designed to introduce you to some of Surfer's basic features. After you have completed the tutorial, you should be able to begin creating your
Information Technology Lab School of Information University of Texas Summer 2005
Introduction to Windows Movie Maker 2 1 Information Technology Lab School of Information University of Texas Summer 2005 1. Introduction This paper tutorial is designed as a basic introduction to Microsoft
Embroidery Fonts Plus ( EFP ) Tutorial Guide Version 1.0505
Embroidery Fonts Plus ( EFP ) Tutorial Guide Version 1.0505 1 Contents Chapter 1 System Requirements.................. 3 Chapter 2 Quick Start Installation.................. 4 System Requirements................
Creating a Logo in CorelDRAW
Creating a Logo in CorelDRAW In this tutorial, we will look at creating a logo for an electrical contracting firm. Our goal is to create a logo that is clean and easily recognizable. Lighthouse Electric
How to create a Flash banner advert in DrawPlus X2
How to create a Flash banner advert in DrawPlus X2 Open DrawPlus X2 and choose Start New: Keyframe Animation Select WebPlus 10 Flash Banner and click on Open The work area should look like the screenshot.
User Guide Installing the 3D Studio plug-ins
Prev Menu Next Back p. 1 Life Forms & 3D Studio Max User Guide Installing the 3D Studio plug-ins Plug-ins for importing and exporting 3DS files are automatically installed with Life Forms. However, if
MET 306. Activity 8a. Mechanism Design Creo 2.0 Level 7 POINT A GROUND LINK LINK 1 LINK 2 LINK 3 POINT B 10/15/2010 1
Mechanism Design Creo 2.0 Level 7 POINT A LINK 1 GROUND LINK LINK 2 LINK 3 POINT B 10/15/2010 1 Download parts ground, key, link_1, link_2, link_3 and pulley from the V:/MET_306/Activity_8_Creo drive.
Quick Tutorial. Overview. The NVIDIA Software Improvement Program. Creating an Effect
Quick Tutorial Overview This chapter presents a very short FX Composer 2.5 tutorial to quickly introduce you to several convenient and powerful new features. We highly recommend this tutorial, particularly
1 CHORD LENGTH OR UNIFORM PARAMETERIZATION
1 CHORD LENGTH OR UNIFORM PARAMETERIZATION All of the better high end packages that implement Nurbs Modeling tools will offer the choice of constructing curves using either Uniform or Chord Length parameterization.
Introduction to Autodesk Inventor for F1 in Schools
F1 in Schools race car Introduction to Autodesk Inventor for F1 in Schools In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s Digital Prototyping strategy
SNM Content-Editor. Magento Extension. Magento - Extension. Professional Edition (V1.2.1) Browse & Edit. Trust only what you really sees.
SNM Content-Editor Magento Extension Professional Edition (V1.2.1) Magento - Extension Browse & Edit Trust only what you really sees. Over the Browse and Edit function you can navigate simply and fast
Introduction to Autodesk Inventor for F1 in Schools
Introduction to Autodesk Inventor for F1 in Schools F1 in Schools Race Car In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s digital prototyping strategy
Welcome to CorelDRAW, a comprehensive vector-based drawing and graphic-design program for the graphics professional.
Workspace tour Welcome to CorelDRAW, a comprehensive vector-based drawing and graphic-design program for the graphics professional. In this tutorial, you will become familiar with the terminology and workspace
Creating an Animation using Windows Movie Maker
Creating an Animation using Windows Movie Maker Previewing Sample Photographs Now that you have learned a little bit about the history of clay animation and you are familiar with how to use software to
OneNote 2013 Tutorial
VIRGINIA TECH OneNote 2013 Tutorial Getting Started Guide Instructional Technology Team, College of Engineering Last Updated: Spring 2014 Email tabletteam@vt.edu if you need additional assistance after
Book Builder Training Materials Using Book Builder September 2014
Book Builder Training Materials Using Book Builder September 2014 Prepared by WDI, Inc. Table of Contents Introduction --------------------------------------------------------------------------------------------------------------------
Sweet Home 3D user's guide
1 de 14 08/01/2013 13:08 Features Download Online Gallery Blog Documentation FAQ User's guide Video tutorial Developer's guides History Reviews Support 3D models Textures Translations Forum Report a bug
KEYBOARD SHORTCUTS. Note: Keyboard shortcuts may be different for the same icon depending upon the SAP screen you are in.
KEYBOARD SHORTCUTS Instead of an SAP icon button, you can use a keyboard shortcut. A keyboard shortcut is a key or combination of keys that you can use to access icon button functions while you are working
Saving work in the CMS... 2. Edit an existing page... 2. Create a new page... 4. Create a side bar section... 4
CMS Editor How-To Saving work in the CMS... 2 Edit an existing page... 2 Create a new page... 4 Create a side bar section... 4 Upload an image and add to your page... 5 Add an existing image to a Page...
Introduction to dobe Acrobat XI Pro
Introduction to dobe Acrobat XI Pro Introduction to Adobe Acrobat XI Pro is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License. To view a copy of this
Designing a Wine Label in CorelDRAW
Designing a Wine Label in CorelDRAW Labels have long been used as an industry standard for product identification. In marketing, labels are used to make a product known and most especially encourage potential
Creating Interactive PDF Forms
Creating Interactive PDF Forms Using Adobe Acrobat X Pro Information Technology Services Outreach and Distance Learning Technologies Copyright 2012 KSU Department of Information Technology Services This
USER INTERFACE HOTKEYS WEB FINDER HOTKEYS. Shortcut Keys and Hot Keys: ZoomText 10 Magnifier/Reader
Shortcut Keys and Hot Keys: ZoomText 10 Magnifier/Reader USER INTERFACE HOTKEYS The modifier keys consist of any combination of ALT, CTRL, SHIFT, CAPS LOCK and the Windows Key. The primary key can be any
Windows XP Pro: Basics 1
NORTHWEST MISSOURI STATE UNIVERSITY ONLINE USER S GUIDE 2004 Windows XP Pro: Basics 1 Getting on the Northwest Network Getting on the Northwest network is easy with a university-provided PC, which has
Clip Art in Office 2000
Clip Art in Office 2000 In the process of making a certificate, we will cover: Adding clipart and templates from the Microsoft Office Clip Gallery, Modifying clip art by grouping and ungrouping, Flipping
Microsoft PowerPoint 2010
Microsoft PowerPoint 2010 Starting PowerPoint... 2 PowerPoint Window Properties... 2 The Ribbon... 3 Default Tabs... 3 Contextual Tabs... 3 Minimizing and Restoring the Ribbon... 4 The Backstage View...
Epson Brightlink Interactive Board and Pen Training. Step One: Install the Brightlink Easy Interactive Driver
California State University, Fullerton Campus Information Technology Division Documentation and Training Services Handout Epson Brightlink Interactive Board and Pen Training Downloading Brightlink Drivers
Terminal 4 Site Manager User Guide. Need help? Call the ITD Lab, x7471
Need help? Call the ITD Lab, x7471 1 Contents Introduction... 2 Login to Terminal 4... 2 What is the Difference between a Section and Content... 2 The Interface Explained... 2 Modify Content... 3 Basic