Declaration of Conformity.

Transcription

1 Declaration of Conformity. 음 Type of equipment: Brand Name /Trade Mark: Type designation /model: Applicant: Digital Video Recorder SAMSUNG SRD-1656DP SAMSUNG TECHWIN CO., LTD. In accordance with the following Directives: 2004/108/EC The Electromagnetic Compatibility Directive Including amendments by the CE Marking Directive 93/68/EEC 2011/65/EU Restriction of the use of certain hazardous substances in electrical and electronic equipment (recast) The following harmonized European standards or technical specifications have been applied: EN 55022:2010 Limits and methods of measurement of radio disturbance characteristics of information technology equipment EN 50581:2012 Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances EN :2011 Product family standard: Immunity requirements for components of fire, intruder and social alarm systems EN :2006+A2:2009 Limits for harmonic current emissions EN :2008 Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <=16 A per phase and not subject to conditional connection EN :2009 Electrostatic discharge immunity test EN :2006+A2:2010 Radiated, radio-frequency, electromagnetic field immunity test EN :2004+A1:2010 Electrical fast transient/burst immunity test EN :2006 Surge immunity test EN :2009 Immunity to conducted disturbances, induced by radio-frequency fields EN :2004 Voltage dips, short interruptions and voltage variations immunity tests The CE Marking on the products and/or their packaging signifies that SAMSUNG TECHWIN CO., LTD. holds the reference technical file available to the European Union authorities. Place and date of issue: Authorized Signatory: 84, Jeongdong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do, Korea / March 21, 2014 Name : Jei Soon, Kang Title : Principal Research Engineer Signature :

2

3 Page: 2 of 76 Contents 1. Applicant information Laboratory information Test system configuration Operation environment Measurement Uncertainty Description of E.U.T General information Product description Auxiliary equipments Test configuration Operating conditions Summary of test results Summary of EMI emission test results Summary of immunity test results Performance criteria Test results Conducted Emission Radiated Emission Harmonics Flicker Electrostatic Discharge Radio Frequency Electromagnetic Fields Electric Fast Transient/BURST Surge Conducted Immunity Dips and Interruptions Mains supply voltage variations E.U.T. photographs... 55

4 Page: 3 of Applicant information Applicant: Samsung Techwin Co., Ltd. Address: 84, Jeongdong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do, Korea Telephone: Fax: js2002.kang@samsung.com Contact name: Kang Jei Soon Manufacturer#1: Samsung Techwin Co., Ltd. Address: 84, Jeongdong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do, Korea Telephone: Fax: js2002.kang@samsung.com Contact name: Kang Jei Soon Manufacturer#2: Address: TIANJIN SAMSUNG TECHWIN OPTO-ELECTRONIC CO., LTD No.11 Weiliu Road. Micro-Electronic Industrial Park Jingang Road Tianjin , China

5 Page: 4 of Laboratory information Address EMC compliance Ltd. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, , Korea Telephone Number: Facsimile Number: FCC CAB.: KR0040 VCCI Registration No. : R-3327, G-198, C-3706, T-1849 Industry Canada Registration No. : 8035A KOLAS NO.: 231 SITE MAP Suwon city EMC compliance

6 Page: 5 of Test system configuration 3.1 Operation environment Temperature Humidity Pressure Chamber(10 m) : 20.3 C 29.8 % R.H. - Shielded room(ce) : 21.9 C 21.3 % R.H. - Shielded room(esd) : 21.1 C 39.6 % R.H kpa Test site These testing items were performed following locations; Test item Test site Conducted Emission Shielded Room Radiated Emission 10 m Chamber Harmonics current Immunity area Voltage fluctuations and flickers Immunity area Electrostatic discharge Shielded Room Radiated RF immunity Fully anechoic chamber (3 m) Electric Fast Transient/BURST Shielded Room Surge Shielded Room Conducted RF immunity Shielded Room Voltage dip/interruption Shielded Room Mains supply voltage variations Shielded Room

7 Page: 6 of Measurement Uncertainty All measurements involve certain levels of uncertainties, especially in field of EMC. The factors contributing to uncertainties are test receiver, cable loss, antenna factor calibration, Antenna directivity, antenna factor variation with height, antenna phase center variation, antenna frequency interpolation, measurement distance variation, site imperfection, mismatch, and system repeatability. Based on CISPR , the measurement uncertainty level with a 95 % confidence level was applied. Conducted emission measurement (C.L: Approx 95 %, k = 2) Shielded Room (CE#1) Shielded Room (CE#2) Shielded Room (CE#3) 9 khz ~ 150 khz: ± 3.82 db 150 khz ~ 30 MHz: ± 3.43 db 9 khz ~ 150 khz: ± 3.82 db 150 khz ~ 30 MHz: ± 3.43 db 9 khz ~ 150 khz: ± 4.00 db 150 khz ~ 30 MHz: ± 3.63 db Radiated Emission measurement (C.L: Approx 95 %, k = 2) 10 m Chamber (#F4) 10 m Chamber (#F2) 30 MHz ~ 300 MHz 300 MHz ~ MHz 3 m: db, db 10 m: db, db 3 m: db, db 10 m: db, db 1 GHz ~ 6 GHz 3 m: db, db 30 MHz ~ 300 MHz 300 MHz ~ MHz 3 m: db, db 10 m: db, db 3 m: db, db 10 m: db, db 1 GHz ~ 6 GHz 3 m: db, db Radio Frequency Electromagnetic Fields (C.L: Approx 95 %, k = 2) ± 1.82 db Disturbance power Electromagnetic Fields (C.L: Approx 95 %, k = 2) ± 3.73 db

8 Page: 7 of Description of E.U.T. 4.1 General information SRD-1656D Video Inputs 16 composite video Vpp, 75 ohm automatic termination Resolution 1280x480 NTSC, 1280x576 PAL / 720x480 NTSC, 720x576 PAL Live Frame rate 480fps NTSC, 400fps PAL Resolution 1280x480 NTSC, 1280x576 PAL, 704x480 NTSC, 704x576 PAL Multi Screen display 1/4/7/9/13/16/16A/PIP/Sequence Performance Operating System Embedded Linux Recording Compression Record Rate Mode H.264 NTSC: Up to 1280x480 / PAL: Up to 1280x576 NTSC: Up to 704x480 / PAL: Up to 704x576 NTSC: Up to 704x240 / PAL: Up to 704x288 NTSC: Up to 352x240 / PAL: Up to 352x288 NTSC: Manual, Schedule (Continuous/Event), Event(Pre/Post), Time lapse (1~30 fps) PAL: Manual, Schedule (Continuous/Event), Event(Pre/Post), Time lapse (1~25 fps) Event Video Loss, Motion(Level 1~10), Alarm, Tampering(Level 1~3) Overwrite modes Continuous Pre-alarm Up to 30 sec (5,10,20,30 Sec) Post-Alarm Up to 6 hour (5,10,20,30 sec,1,3,5,10,20 min,1,2,3,4,5,6 hour) Search & Playback Search mode Date/time, Event, Back up, Pos, Motion ( All Search Included Preview Function) Playback function Fast Forward/Backward (x2,x4,x8,x16,x32,x64) Backward Play with I-frame Only, Slow Forward/Backward (x1/2,x1/4,x1/8) Backward Play with I-frame Only Step Forward/Backward Network (IPv4) Transmission speed Option 1) 1280H/4CIF/2CIF/CIF(120/120/240/480fps NTSC, 100/100/200/400fps PAL) Option 2) 4CIF/2CIF/CIF(120/240/480fps NTSC, 100/200/400fps PAL) Bandwidth Up to 32Mbps Bandwidth control Selectable Stream H.264(4CIF/2CIF/CIF Selectable) Remote users Maximum Search(3)/Live Unicast(10)/Live Multicast(20) Protocol support TCP/IP,DHCP,PPPoE,SMTP,NTP,HTTP,DDNS,RTP,RTSP,SNMP Monitoring Smart viewer,web viewer, SSM(CMS) Smart phone Platform Android, ios Protocol support RTP,RTSP,HTTP,CGI,HTTPS Remote users Maximum Live(4), Search(1) Storage Internal HDD Up to 4 SATA HDDs External (e-sata Interface) Up to 2 expansion bay ( Model: SVS-5R/5E) DVD Writer (Back-up) YES USB (Back-up) 2 USB Ports File Format (Back-up) BU(DVR Player), EXE(Include Player), AVI Security Password Protection 1 Admin, 10 Group, 10 User per 1 Group Data Authentication Watermark Interface Monitors VGA 1 VGA (1280x720, 1280x1024, 1920x1080) HDMI 1 HDMI (1280x720, 1280x1024, 1920x1080) Main Composite N/A Spot(Composite) Digital Spot (2CH) Included OSD On Screen, Multi mode Support(1CH) Loop Outputs 16CH Audio Inputs/Output 16CH line in (Built in 4CH, Option : Audio Extension Cable)/ 1CH line out Compression G.711 Sampling rate 8KHz Alarm Inputs/Outputs Terminal 16 Inputs (NO/NC) / Terminal 4 relay Outputs (NO/NC), Rating : 30V DC/2A, 250V AC/0.25A Remote notification Notification via Connections Ethernet 1 RJ45 10/100/1000 Base-T Serial interface RS-232/RS-485(Full Duplex) for PTZ, Samsung System Keyboard USB USB 2.0, 2 ports e-sata 2 External SATA ports Application Supoort Protocol support Mouse, Remote Controller Samsung-E/Samsung-T/Pelco-D/Pelco-p/Panasonic/ Phillips/ AD/ DIAMOND/ ERNA/ KALATEL/ VCL PTZ Control via Coaxial Cable (Samsung CCVC, Pelco-C (Coaxitron)) General Electrical Input Voltage/Current 100 to 240 VAC ±10%; 50/60 Hz, Autoranging Power consumption Max. 60 W (with 1x HDD) Environmental Operating Temperature/Humidity +0 C to +40 C (+32 F to +104 F) / 20% to 85% RH Mechanical Dimension (W x H x D) W440 x H88 x D384.8(17.32 x 3.46 x ) Weight (With hard disks) 6.81 kg (15.01 lb) Rack mount kit 2 EA Lauguage English, French, German, Spanish, Italian, Russian, Polish, Czech, Turkish, Netherlands Portuguese, Swedish, Danish, Rumania, Serbia, Croatia, Hungary, Greek, Finnish, Norwegian, Korean, Japanese, Chinese(Traditional), Thai, Taiwanese(25 Language)

9 Page: 8 of Product description Type of product Model name (Basic) Digital Video Recorder SRD-1656DP Model name (Variant) - Difference - Trade name - Serial no Testing voltage Product rating Internal clock frequency Engineering Sample 230 V, 50 Hz V, 50/60 Hz Above 108 MHz Note Auxiliary equipments Type Model / Part # Serial number Manufacturer Monitor #1 PM24KO ZQ9XH1HBA01776V SAMSUNG Monitor #2 LT24B350 ZWP0HMCD10771M SAMSUNG Monitor #3 SMT-2231P YDQ03VDBB02500H SAMSUNG Controller SCC-1000 EW SAMSUNG Camera SCB-6000 C6PW6V3B80115Y SAMSUNG External HDD SP USB Memory(8GB) JFV33 - TRANSCEND MIC - - -

10 Page: 9 of Test configuration Note Start End Cable Length Name I/O port Name I/O port * (m) Spec. Cable 1 Power AC Main Power 1.5 Non-Shield - 2 HDMI Monitor #1 HDMI 1.0 Shield - 3 Audio Out Monitor #1 Audio In 3.0 Shield Out-door 4 D-SUB Monitor #2 D-SUB 1.5 Shield - 5 Loop Out #16 Monitor #3 Loop In 3.0 Shield Out-door 6 RS-485 Controller RS Non-Shield Out-door 7 Video In #1 Camera Video Out 3.0 Shield Out-door 8 e-sata #1 External HDD e-sata #1 1.0 Non-Shield - USB Mouse 9 USB USB 1.0 Shield - (EUT) EUT 10 USB USB Memory USB Direct - - (Digital 11 Audio In #1 MIC Audio Out 3.0 Shield Out-door Video 12 Alarm In/Out JIG Alarm In/Out 3.0 Non-Shield Out-door Recorder) 13 LAN(RJ-45) External LAN LAN(RJ-45) 3.0 Non-Shield - 14 Console Open Non-Shield - 15 Serial Open Shield - 16 e-sata #2 Open Non-Shield - 17 Audio In #2~#16 Open Shield Out-door 18 SPOT #1, #2 75 Ω Termination Shield Out-door 19 Video In #2~#16 Loop Loop Out #1~# Shield -

11 Page: 10 of Operating conditions The EUT was configured as normal intended use. Test mode Normal operating Monitoring test. Ping test. 1 Alarm In/Out test. Audio In/Out test. RS-485 test.

12 Page: 11 of Summary of test results 5.1 Summary of EMI emission test results Applied Test items Test method Result Conducted Emission EN 55022:2010 Complied Radiated Emission EN 55022:2010 Complied Harmonics current EN :2006+A2:2009 Complied Voltage fluctuations and flickers EN :2008 Complied 5.2 Summary of immunity test results Applied Test items Test method Result * EN :2011 Electrostatic discharge EN :2009 Complied Radiated RF immunity EN :2006+A2:2010 Complied Electric Fast Transient/BURST EN :2004+A1:2010 Complied Surge EN :2006 Complied Conducted RF immunity EN :2009 Complied Voltage dip/interruption EN :2004 Complied Mains supply voltage variations EN :2011 Complied

13 Page: 12 of Performance criteria The variety and the diversity of the apparatus within the scope of this document makes it difficult to define precise criteria for the evaluation of the immunity test results. If as a result of the application of the tests defined in this standard, the apparatus becomes dangerous or unsafe then the apparatus shall be deemed to have failed the test. A functional description and a definition of performance by the manufacture and noted in the test report, based on the following criteria: Electrostatic discharge There shall be no damage, malfunction or change of status due to the conditioning. Flickering of an indicator during the application of discharge is permissible, providing which could be interpreted by associated equipment as a change, Radiated electromagnetic fields There shall be no damage, malfunction or change of status due to the conditioning. Flickering of an indicator during the application of discharge is permissible, providing which could be interpreted by associated equipment as a change, and no such Flickering of indicators occurs at a field strength of 3 V/m. For components of CCTV systems, where the picture is allowed at 10 V/m, providing. (a) there is no permanent damage or change to EUT (e.g. no corruption of memory or changes to programmable setting etc.) (b) at 3 V/m, any deterioration of the picture is so minor that the system could still be used; and (c) there is no observable deterioration of the picture at 1 V/m. Fast transient burst / slow high energy voltage surge There shall be no damage, malfunction or change of status due to the conditioning. Flickering of an indicator during the application of discharge is permissible, providing That there is no residual is permissible, providing that there is no residual change in the EUT or any change in outputs, which could be interpreted by associated equipment as

14 Page: 13 of 76 Conducted RF immunity There shall be no damage, malfunction or change of status due to the conditioning. Flickering of an indicator during the application of discharge is permissible, providing That there is no residual is permissible, providing that there is no residual change in the EUT or any change in outputs, which could be interpreted by associated equipment as a change, and no such flickering of indicators oeuvres at U = 130 dbμv. For component of CCTV systems, where the status is monitored by observing the TV picture, then deterioration of the picture is allowed at U = 140 dbμv, providing: (a) there is no permanent damage or change to the EUT (e.g. no corruption of memory or changes to programmable settings etc.) (b) at U = 130 dbμv, any deterioration of the picture is so minor that the system could still be used; and (c) there in no observable deterioration of the picture at U = 120 dbμv. Voltage dip/interruption / Voltage variation There shall be no damage, malfunction or change of status due to the conditioning. Flickering of an indicator during the conditioning is permissible, providing that there is no residual change in the EUT or any change in outputs, which could be interpreted by associated equipment as a change. The EUT shall meet the acceptance criteria for the functional test, after the conditioning.

15 Page: 14 of Test results 6.1 Conducted Emission Test specification Testing voltage Test facility EN 55022:2010, Class A 230 V, 50 Hz Shielded room (CE#1) Date Temperature ( C) 21.9 C Humidity (% R.H.) 21.3 % R.H. Remarks Complied Limits of conducted emission measurement AC main Frequency Class A (db(μv)) Class B (db(μv)) [MHz] Quasi-peak Average Quasi-peak Average 0.15 ~ ~ 56 * 56 ~ 46* 0.5 ~ ~ *The limit decreases linearly with the logarithm of frequency. Telecommunication Frequency Class A Voltage Limits (db(μv)) Current Limits (db(μa)) [MHz] Quasi-Peak Average Quasi-Peak Average 0.15 ~ to to to to ~ Frequency [MHz] Class B Limits (db(μv)) Current Limits (db(μa)) Quasi-Peak Average Quasi-Peak Average 0.15 ~ to to to to ~ * The limits decrease linearly with the logarithm of the frequency in the range 0.15 MHz to 0.5 MHz * The current and voltage disturbance limits are derived for use with an impedance stabilization Network (ISN) which presents a common mode (asymmetric mode) impedance of 150 Ω to the telecommunication port under test (conversion factor is 20 log /I = 44 db).

16 Page: 15 of Measurement procedure The measurements were performed in a shielded room. EUT was setup as shown in photograph and placed on a non-metallic table height of 0.8 m above the reference ground plane. The rear of table was located 0.4 m to the vertical conducted plane. EUT was power through the LISN, which was bonded to the ground plane. The LISN power was filtered. Each EUT power lead, except ground (safety) lead was individually connected through a LISN to input power source. EUT signal cables that hung closer than 0.4 m to the Horizontal metal ground 0.3 m ~ 0.4 m long. The power cord was bundles in the center. All peripheral equipment was powered from a sub LISN. The LISN and ISN were positioned 0.8 m from the EUT. Peak and Average detection were used in preliminary testing and Quasi-peak and Average detections were used at final measurement. Both lines of power cord, hot and neutral, were measured Used equipments Equipment Model Serial No. Makers Next Cal. Date Used Test Receiver ESCI R&S Test Receiver ESCI R&S Test Receiver ESCI R&S LISN ENV R&S LISN ESH3-Z R&S WIRE ISN NTFM 8158 CAT5 CAT SCHWARZBECK WIRE ISN NTFM 8158 CAT3 CAT SCHWARZBECK ISN ST TESEQ

17 Page: 16 of Photographs of test setup * AC Main

18 Page: 17 of 76 * Telecommunication

19 Page: 18 of Conducted emission measurement result * AC Main (SRD-1656DP) EMC Compliance.Ltd Shieldroom <<Conducted Emission>> 19 March, :54 Model : Serial : Operator : AC Power : 230V 50Hz Temp,Humidity : [db(uv)] 90 Level Standard : CISPR 22 Class A Remark1 : Remark2 : Remark3 : Remark4 : <CISPR22 A> Limit (QP) Limit (AV) <KC> Spectrum (N,AV) Spectrum (N,PK) Spectrum (L1,AV) Spectrum (L1,PK) Suspected Item(N) Suspected Item(L1) Final Item-QP(N) Final Item-AV(N) Final Item-QP(L1) Final Item-AV(L1) Frequency [MHz] Final Result --- N Phase --- No. Frequency Reading Reading c.f Result Result Limit Limit Margin Margin QP CAV QP CAV QP AV QP CAV [MHz] [db(uv)] [db(uv)] [db] [db(uv)] [db(uv)] [db(uv)] [db(uv)] [db] [db] L1 Phase --- No. Frequency Reading Reading c.f Result Result Limit Limit Margin Margin QP CAV QP CAV QP AV QP CAV [MHz] [db(uv)] [db(uv)] [db] [db(uv)] [db(uv)] [db(uv)] [db(uv)] [db] [db]

20 Page: 19 of 76 * Telecommunication port (SRD-1656DP) LCL 65 db (LAN(RJ-45) Port) _10 Mbps EMC Compliance.Ltd Shieldroom <<Conducted Emission>> 19 March, :03 Model : Serial : Operator : AC Power : 230V 50Hz Temp,Humidity : [db(uv)] 110 Level Standard : CISPR 22 Class A Remark1 : Remark2 : Remark3 : Remark4 : <CISPR22 A_TEL> Limit (QP) Limit (AV) <CE_10_T> Spectrum (ISN-CAT5,AV Spectrum (ISN-CAT5,PK Suspected Item(ISN-CAT Final Item-QP(ISN-CAT5 Final Item-AV(ISN-CAT Frequency [MHz] Final Result --- ISN-CAT5 Phase --- No. Frequency Reading Reading c.f Result Result Limit Limit Margin Margin QP CAV QP CAV QP AV QP CAV [MHz] [db(uv)] [db(uv)] [db] [db(uv)] [db(uv)] [db(uv)] [db(uv)] [db] [db]

21 Page: 20 of 76 LCL 65 db (LAN(RJ-45) Port) _1000 Mbps EMC Compliance.Ltd Shieldroom <<Conducted Emission>> 19 March, :26 Model : Serial : Operator : AC Power : 230V 50Hz Temp,Humidity : [db(uv)] 110 Level Standard : CISPR 22 Class A Remark1 : Remark2 : Remark3 : Remark4 : <CISPR22 A_TEL> Limit (QP) Limit (AV) <CE_1000_T> Spectrum (ISN-CAT5,AV Spectrum (ISN-CAT5,PK Suspected Item(ISN-CAT Final Item-QP(ISN-CAT5 Final Item-AV(ISN-CAT Frequency [MHz] Final Result --- ISN-CAT5 Phase --- No. Frequency Reading Reading c.f Result Result Limit Limit Margin Margin QP CAV QP CAV QP AV QP CAV [MHz] [db(uv)] [db(uv)] [db] [db(uv)] [db(uv)] [db(uv)] [db(uv)] [db] [db]

22 Page: 21 of Radiated Emission Test specification Testing voltage Test facility Test distance EN 55022:2010, Class A 230 V, 50 Hz 10 m Chamber (#F2) 10 m, 3 m Date Temperature ( C) 20.3 C Humidity (% R.H.) 29.8 % R.H. Remarks Complied Limits of radiated emission measurement Limits below 1 GHz Frequency [MHz] Class A 10 m Class B 10 m 30 ~ ~ Limits above 1 GHz Class 3 m Class 3 m Frequency Average limit Peak limit Average limit Peak limit [GHz] (db(μv/m)) (db(μv/m)) (db(μv/m)) (db(μv/m)) 1 ~ ~ Note - The lower limit applies at the transition frequency Measurement procedure The test was done at a 10 m chamber with a quasi-peak detector. EUT was placed on a non-metallic table height of 0.8 m above the reference ground plane. Cables were folded back and forth forming a bundle 0.3 m to 0.4 m long and were hanged at a 0.4 m height to the ground plane. Cables connected to EUT were fixed to cause maximum emission. Test was made with the antenna positioned in both the horizontal and vertical planes of polarization. The measurement antenna was varied in height above the conducting ground plane to obtain the maximum signal strength.

23 Page: 22 of Used equipments Equipment Model no. Serial no. Makers Next Cal. Date Used Test Receiver ESCI R&S Test Receiver ESCI R&S Test Receiver ESCI R&S Test Receiver ESR R&S Bi-Log Antenna VULB SCHWARZBECK Amplifier 310N SONOMA INSTRUMENT db Attenuator 8491B HP Antenna Mast MA4000-EP 303 Innco Systems - Turn Table DT2000S-1t 079 Innco Systems - Amplifier 8449B 3008A02343 AGILENT Horn ANT ETS Spectrum Analyzer FSP R&S Sample calculation The field strength is calculated adding the antenna Factor, cable loss and, Antenna pad adding, subtracting the amplifier gain from the measured reading. The sample calculation is as follow: Result = M.R + C.F(A.F + C.L +3 db Att A.G) M.R = Meter Reading C.F = Correction Factor A.F = Antenna Factor C.L = Cable Loss A.G= Amplifier Gain 3 db Att = 3 db Attenuator If M.R is 30 db, A.F 12 db, C.L 5 db, 3 db, A.G 35 db The result is = 15 db(μv/m)

24 Page: 23 of Photographs of test setup * 30 MHz ~ 1 GHz

25 Page: 24 of 76 * 1 GHz ~ 6 GHz

26 Page: 25 of Radiated emission measurement result * Graph and Data * 30 MHz ~ 1 GHz (SRD-1656DP) EMC Compliance Ltd. 10m Chamber <<Radiated Emission>> 17 March, :36 Model : Serial : Operator : AC Power : AC 230V / 50Hz Temp,Humidity : [db(uv/m)] Standard : CISPR 22 CLASS A 10m Remark1 : Remark2 : Remark3 : Remark4 : <A> Limit(QP) <CE_RE> Spectrum(H,PK) Spectrum(V,PK) Suspected Item(H) Suspected Item(V) Final Item(H,QP) Final Item(V,QP) Level Frequency [MHz] Final Result No. Frequency (P) Reading c.f Result Limit Margin Height Angle QP QP QP QP [MHz] [db(uv)] [db(1/m)] [db(uv/m)] [db(uv/m)] [db] [cm] [deg] H V V H H H H H

27 Page: 26 of 76 * 1 GHz ~ 6 GHz (SRD-1656DP) EMC Compliance Ltd. 10m Chamber <<Radiated Emission>> 17 March, :28 Model : Serial : Operator : Power : 230V / 50Hz Temp,Humidity : [db(uv/m)] 90 Level Standard : CISPR22 CLASS A 3m Remark1 : Remark2 : Remark3 : Remark4 : <A_GHz> Limit(AV) Limit(PK) <CE_RE_G> Spectrum(H,PK) Spectrum(V,PK) Suspected Item(H) Suspected Item(V) Final Item(H,AV) Final Item(H,PK) Final Item(V,AV) Final Item(V,PK) Frequency [MHz] Final Result No. Frequency (P) Reading Reading c.f Result Result Limit Limit Margin Margin Height Angle AV PK AV PK AV PK AV PK [MHz] [db(uv)] [db(uv)] [db(1/m)] [db(uv/m)] [db(uv/m)] [db(uv/m)] [db(uv/m)] [db] [db] [cm] [deg] V H V H H V

28 Page: 27 of Harmonics Test specification Testing voltage Test facility EN :2006+A2: V, 50 Hz Immunity area Date Temperature( C) 20.4 C Humidity (% R.H.) 22.1 % R.H. Pressure (kpa) kpa Remarks Complied Measurement procedure The equipment is supplied in series with shunt(s) Rm or current transformer(s) from a source having the same nominal voltage and frequency as the rated supply voltage and frequency of the equipment. Measurements shall be made under normal load, or conditions for adequate heat discharge, and under normal operating conditions. User s operation controls or automatic programmers shall be set to produce the maximum harmonic component, for each successive harmonic component in turn. For the purpose of harmonic current limitation, equipment is classified as follows : Class A : Equipment not specified in one of the three other Classes shall be considered as Class A equipment. - Balanced three-phase equipment; - Household appliances excluding equipment identified as Class D; - Tools excluding portable tools; - Dimmers for incandescent lamps; - Audio equipment. Class B : Portable tools; Arc welding equipment which is not professional equipment. Class C : Lighting equipment. Class D : Equipment having a specified power according to less than or equal to 600 w, of the following types: - Personal computers and personal computer monitors; - Television receivers.

29 Page: 28 of Used equipments Equipment Model no. Serial no. Makers Harmonics/Flicker meter 5001x-CTS Next Cal. date C.I Used Photographs of test setup

30 Page: 29 of Measurement result

31 Page: 30 of 76

32 Page: 31 of 76

33 Page: 32 of Flicker Test specification EN :2008 Testing voltage Test facility 230 V, 50 Hz Immunity area Date Temperature( C) 20.4 C Humidity (% R.H.) 22.1 % R.H. Pressure (kpa) kpa Remarks Complied Measurement procedure EUT was connected to the power analyzer system. Measurement was performed to obtain the desired flicker parameters. The measuring time depends on which parameters are to be measured. P lt P st = 2 h = 10 min Controls and automatic programs shall be set to produce the most unfavorable sequence of voltage changes, using only those combinations of controls and programs are mentioned by the manufacturer in the instruction manual.

34 Page: 33 of Used equipments Equipment Model no. Serial no. Makers Harmonics/Flicker meter 5001x-CTS Next Cal. date C.I Used Photographs of test setup

35 Page: 34 of Measurement result

36 Page: 35 of Electrostatic Discharge Test specification EN :2009 Contact: ± 6 kv Air: ± 2 kv, ± 4 kv, ± 8 kv Test level HCP: ± 2 kv, ± 4 kv, ± 6 kv VCP: ± 2 kv, ± 4 kv, ± 6 kv Discharge impedance 330 Ω / 150 pf Number of discharge (Each polarity) Interval between discharges Testing voltage Test facility Contact: 10 Air: 10 HCP / VCP: 10 1 s 230 V, 50 Hz Shielded room Date Temperature( C) 21.1 C Humidity (% R.H.) 39.6 % R.H. Pressure (kpa) kpa Remarks Complied - There was no change of operation status during above testing Measurement procedure A ground reference plane was located on the floor, and connected to earth via a low Impedance connection. The return cable of the ESD generator was connected to the reference plane. In case of floor standing equipment, EUT was placed on the reference plane on 0.1 m of insulating Support. In case of table top equipment, EUT was placed on a wooden table 0.8 m above the reference grounded floor. A horizontal coupling plane (HCP) was placed on the table, and Connected to the reference plane via a 470 kω resistor located in each end (0.5 mm insulating support between EUT and HCP). In both cases a vertical coupling plane(vcp) OF 0.5 X 0.5 m was located 0.1 m from the EUT s sides. The VCP was connected to the reference plane in the same matter as the HCP.

37 Page: 36 of Used equipments Equipment Model No. Serial No. Makers Next Cal. Date Used ESD Tester PESD 1600 H HAEFELY ESD Tester NSG TESEQ HCP VCP Photographs of test setup

38 Page: 37 of Measurement result Electrostatic Discharge (Test Point) Air discharge Contact discharge

39 Page: 38 of 76

40 Page: 39 of 76 HCP/VCP discharge Location(EUT) Applied level (±) Result HCP (All 4 sides) ± 2 kv, ± 4 kv, ± 6 kv Complied VCP (All 4 sides) ± 2 kv, ± 4 kv, ± 6 kv Complied Contact discharge Location(EUT) Applied level (±) Result C1 Enclosure(Case) ± 6 kv Complied C2 Screw ± 6 kv Complied C3 USB Port ± 6 kv Complied C4 Audio In/Out Port ± 6 kv Complied C5 Video In Port ± 6 kv Complied C6 Loop Out Port ± 6 kv Complied C7 SPOT Port ± 6 kv Complied C8 Serial Port ± 6 kv Complied C9 Console Port ± 6 kv Complied C10 e-sata Port ± 6 kv Complied C11 HDMI Port ± 6 kv Complied C12 D-SUB Port ± 6 kv Complied Air discharge Location(EUT) Applied level (±) Result A1 Mouse_Enclosure(Case) ± 2 kv, ± 4 kv, ± 8 kv Complied A2 Remote Control_ Enclosure(Case) ± 2 kv, ± 4 kv, ± 8 kv Complied A3 Button ± 2 kv, ± 4 kv, ± 8 kv Complied A4 LED ± 2 kv, ± 4 kv, ± 8 kv Complied A5 Power Port ± 2 kv, ± 4 kv, ± 8 kv Complied A6 LAN(RJ-45) Port ± 2 kv, ± 4 kv, ± 8 kv Complied A7 Alram In/Out Port ± 2 kv, ± 4 kv, ± 8 kv Complied A8 RS-485 Port ± 2 kv, ± 4 kv, ± 8 kv Complied

41 Page: 40 of Radio Frequency Electromagnetic Fields Test specification Tested frequency Test level & Modulation Frequency Step Dwell time Distance Testing Voltage EN :2006+A2: MHz ~ 2.7 GHz 1 V/m, 3 V/m, 10 V/m, 80 % Amplitude Modulation (1 khz) 1 V/m, 3 V/m, 10 V/m, Pulse Modulation (1 Hz (0.5s ON: 0.5s OFF)) log 1 % step 3 s 3 m from EUT to tip of antenna 230 V, 50 Hz Test facility Fully anechoic chamber (3 m) Date Temperature( C) 21.6 C Humidity (% R.H.) 29.4 % R.H. Pressure (kpa) kpa Remarks Complied - There was no change of operation status during above testing Measurement procedure The test was performed at 3 m full anechoic chamber. For floor standing equipment, the EUT was standing on the floor. For tabletop equipment, the EUT was located on a wooden table 0.8 m above the floor. The EUT was tested all sides, horizontal and vertical polarization.

42 Page: 41 of Used equipments Equipment Model no. Serial no. Makers Next Cal. date Used Power meter PM AR Power sensor PH AR Power sensor PH AR Directional coupler DC AR Directional coupler DC7144M AR Signal generator E4421B GB AGILENT Broadband Amplifier BBA R&S Amplifier 60S1G3M AR Log Periodic Dipole Antenna LPDA ETS - Isotropic Probe HI ETS- LINDGREN Antenna master - - ETS Photographs of test setup

43 Page: 42 of Measurement result Location(EUT) Antenna polarization Result Front side Horizontal Complied Vertical Complied Rear side Horizontal Complied Vertical Complied Left side Horizontal Complied Vertical Complied Right side Horizontal Complied Vertical Complied

44 Page: 43 of Electric Fast Transient/BURST Test specification Coupling Test level Repetition frequency Coupling time Testing Voltage Test facility EN :2004+A1:2010 AC main Signal/Control: Clamp Telecommunication: Clamp AC main: ± 2 kv Peak Signal/Control: ± 1 kv Peak Telecommunication: ± 1 kv Peak 100 khz, Tr/Th = 5 / 50 ns 60 s 230 V, 50 Hz Shielded room Date Temperature( C) 21.7 C Humidity (% R.H.) 34.8 % R.H. Pressure (kpa) kpa Remarks Complied - There was no change of operation status during above testing Measurement procedure A ground reference plane was located on the floor. EFT generator was connected to reference ground plane via low impedance connection. For floor standing equipment, EUT was placed on a 0.1 m wooden table. For tabletop equipment, EUT was placed on a 0.1 m above the ground reference plane. Test generator and coupling/decoupling network was placed on, and bounded to, the ground reference plane. When using the coupling clamp, the minimum distance between the coupling plates and all other conductive surfaces, except the ground reference plane beneath the coupling clamp, Shall be 0.5 m Used equipments Equipment Model No. Serial No. Makers Next Cal. date Used Ultra compact simulator UCS500N V EM TEST Ultra compact simulator UCS500M EM TEST Capacitive Coupling Clamp - - EM TEST

45 Page: 44 of Photographs of test setup

46 Page: 45 of Measurement result * AC main EFT coupling point (+) (-) Result L+N+PE + 2 kv - 2 kv Complied * Signal/Control EFT coupling point (+) (-) Result Alarm In/Out + 1 kv - 1 kv Complied Audio In/Out + 1 kv - 1 kv Complied RS kv - 1 kv Complied Loop Out # kv - 1 kv Complied Video In #1 + 1 kv - 1 kv Complied SPOT #1, #2 + 1 kv - 1 kv Complied * Telecommunication EFT coupling point (+) (-) Result LAN(RJ-45) + 1 kv - 1 kv Complied

47 Page: 46 of Surge Test specification EN :2006 Coupling AC main: Direct Signal/Control: Direct, CDN AC main: Differential mode: ± 0.5 kv, ± 1 kv Test level Common mode: ± 0.5 kv, ± 1 kv, ± 2 kv Coupling Impedance Surge pulse shape Signal/Control: ± 0.5 kv, ± 1 kv Differential mode: 18 μf 40 Ω μf Tr/Th = 1.2 / 50 μs Angles 0, 90, 180, 270 Number of surge 5 Common mode: 10 Ω + 9 μf Direct Coupling time Testing Voltage Test facility 1 min 230 V, 50 Hz Shielded room Date Temperature( C) 21.7 C Humidity (% R.H.) 34.8 % R.H. Pressure (kpa) kpa Remarks Complied - There was no change of operation status during above testing Measurement procedure A ground reference plane was located on the floor. SURGE generator was connected to reference ground plane via low impedance connection. For floor standing equipment & table top equipment, EUT was placed on a wooden table Used equipments Equipment Model No. Serial No. Makers Next Cal. date Used Ultra compact simulator UCS500N V EM TEST Ultra compact simulator UCS500M EM TEST CDN CNV 508 N1 V EM TEST

48 Page: 47 of Photographs of test setup

49 Page: 48 of Measurement result * AC main Coupling point (+) (-) Result L+N kv, + 1 kv kv, - 1 kv Complied L+PE kv, + 1 kv, + 2 kv kv, - 1 kv, - 2 kv Complied N+PE kv, + 1 kv, + 2 kv kv, - 1 kv, - 2 kv Complied * Signal/Control Coupling point (+) (-) Result Alarm In/Out kv, + 1 kv kv, - 1 kv Complied Audio In/Out kv, + 1 kv kv, - 1 kv Complied RS kv, + 1 kv kv, - 1 kv Complied Loop Out # kv, + 1 kv kv, - 1 kv Complied Video In # kv, + 1 kv kv, - 1 kv Complied SPOT #1, # kv, + 1 kv kv, - 1 kv Complied

50 Page: 49 of Conducted Immunity Test specification EN :2009 Tested frequency Test level & Modulation Frequency Step Coupling method Testing Voltage Test facility 0.15 MHz ~ 100 MHz 1 V, 3 V, 10 V, 80 % Amplitude Modulation (1 khz) 1 V, 3 V, 10 V, Pulse Modulation (1 Hz (0.5s ON: 0.5s OFF)) log 1 % step AC main: CDN(M3) Signal/Control: CDN(S1/75), Clamp Telecommunication: CDN(T8-RJ45) 230 V, 50 Hz Shielded room Date Temperature( C) 24.3 C Humidity (% R.H) 33.7 % R.H Pressure(kPa) kpa Remarks Complied - There was no change of operation status during above testing Measurement procedure A ground reference plane was located on the floor. The test was performed on a ground reference plane on a 0.1 m wooden table. This test were Performed using CDN for mains, clamp for signal and injection probe. The frequency range was swept from 0.15 MHz to 100 MHz. This frequency range was Modulated with 1 khz sine wave at 80 %. The signal generators provided the modulated frequency at a 1 % step size. The power and all network cable, I/O cables longer than 3 m length were tested.

51 Page: 50 of Used equipments Equipment Model no. Serial no. Makers Next Cal. date Used CS generator NSG Schaffner CDN M Schaffner CDN CDN M2/M3N EM TEST Attenuator INA Schaffner EM Clamp KEMZ Schaffner CDN CDN S1/ EM TEST CDN CDN-T8-RJ EM TEST Photographs of test setup

52 Page: 51 of Measurement result * AC main Coupling point Coupling method Result Power CDN(M3) Complied * Signal/Control Coupling point Coupling method Result Alarm In/Out Clamp Complied Audio In/Out Clamp Complied RS-485 Clamp Complied Loop Out #16 CDN(S1/75) Complied Video In #1 CDN(S1/75) Complied SPOT #1, #2 CDN(S1/75) Complied * Telecommunication Coupling point Coupling method Result LAN(RJ-45) CDN(T8-RJ45) Complied

53 Page: 52 of Dips and Interruptions Test specification EN :2004 Number of dips 3 T Duration 10 s Phase Zero crossing (0 ) Testing Voltage Test facility 100 V, 50 Hz / 240 V, 50 Hz Shielded room Test Date Temperature ( C) 21.7 C Humidity (% R.H.) 34.8 % R.H. Pressure (kpa) kpa Remarks Complied Measurement procedure The dips/interruption test is only applicable to AC mains. The dips/interruptions were applied at zero crossing Used equipments Equipment Model no. Serial no. Makers Next Cal. date Used Ultra compact simulator UCS500N V EM TEST Ultra compact simulator UCS500M EM TEST

54 Page: 53 of Photographs of test setup Measurement result * 100 V, 50 Hz / 240 V, 50 Hz Test Level (%UT) Dip/Int. (%UT) Duration /Period Phase ( ) Count number Result 80 % 20% 250 Period (1) 0 3T Complied 70 % 30 % 25Period 0 3T Complied 40 % 60 % 10 Period 0 3T Complied 0% 100 % 250 Period (2) 0 3T Note* Comment: - There was no change of operation status during above testing. (250 Period (1), 25Period, 10 Period) - Note* (250 Period (2) ) The power of EUT is off during the test. After the test, EUT is getting back to normal operation. It fully recorded using ancillary Power source equipment to content with Manufacturer`s set up manual.

55 Page: 54 of Mains supply voltage variations Test specification EN :2011 Supply voltage U nom + 10 %, U nom - 15 % Testing voltage 100 V, 50 Hz / 240 V, 50 Hz Test Date Temperature ( C) 21.7 C Humidity (% R.H.) 34.8 % R.H. Pressure (kpa) kpa Remarks Complied Used equipments Equipment Model no. Serial no. Makers Next Cal. date Used Ultra compact simulator UCS500N V EM TEST Ultra compact simulator UCS500M EM TEST Measurement result * 240 V, 50 Hz Comment: Supply voltage Result + 10 % 264 V Complied - 15 % 204 V Complied - There was no change of operation status during above testing. * 100 V, 50 Hz Supply voltage Result + 10 % 110 V Complied - 15 % 85 V Complied Comment: - There was no change of operation status during above testing.

56 Page: 55 of E.U.T. photographs Front View Rear View

57 Page: 56 of 76 Left View Right View

58 Page: 57 of 76 Top View Bottom View

59 Page: 58 of 76 Inside

60 Page: 59 of 76 Main Board

61 Page: 60 of 76 SUB Board

62 Page: 61 of 76 USB Board

63 Page: 62 of 76 Port Board

64 Page: 63 of 76 SATA Board

65 Page: 64 of 76 SATA DVD Board

66 Page: 65 of 76 HDD (1TB)

67 Page: 66 of 76

68 Page: 67 of 76 ODD

69 Page: 68 of 76

70 Page: 69 of 76 Power

71 Page: 70 of 76

72 Page: 71 of 76

73 Page: 72 of 76 USB Mouse

74 Page: 73 of 76

75 Page: 74 of 76 Remote Control

76 Page: 75 of 76

77 Page: 76 of 76