Bronze. Bronze. Characterised by its earthy colouring, Bronze meets the increasing desire for an alternative finish to stainless steel.

Transcription

1 Bronze Solution

2

3 Bronze Characterised by its earthy colouring, Bronze meets the increasing desire for an alternative finish to stainless steel. From the moment the hardware is subjected to regular use, a natural patina is formed and the ageing process of the material occurs, creating the personality of Bronze. Our Bronze is made up of a coppertin alloy containing 92% copper and 8% tin. Whereas pure copper is comparatively soft, the tin in bronze lends it great strength and hardness. This composition therefore provides excellent resistance to wear and corrosion. Bronze is ideal for renovation and refurbishment projects providing a charming reminder of the past. Furthermore, copper alloys provide better anti-microbial properties than brass and stainless steel, making Bronze ideal for healthcare projects where hygiene is paramount. For those products that are not available in Bronze, Allgood provides a powder coated finish to match. Electrostatically applied and oven cured, the powder coating satisfies BS6496 and BS3900 requirements. Resistant to heat, acid and abrasion, the finish is unaffected by ultra-violet light and is suitable for use in all climatic conditions. Incorporated within the range are the following items: lever handles pull handles window handles hinges door closers locks and cylinders accessories By offering a consistent finish across all items, we give you the confidence to specify a co-ordinated, Bronze solution for all of your ironmongery. Bronze

4 Index 1 FURNITURE Lever handles Pull handles and push plates Window handles Hardware Hinges Closers Locks and latches Cylinders Flush bolts Accessories Escutcheons Bathroom turns Door stops Flush pulls Signs Bronze

5 1 Furniture Lever handles Pull handles Push plates Window handles Bronze

6 Lever handles x 61mm Johannes Potente lever handle set. It is not known who designed the original of the We suspect it was hatched by the wehag company. The version by Johannes Potente is a very clean-lined lever handle that assumes a completely fresh identity in the new bronze variant x 65mm Johannes Potente lever handle set. In the 1950s, the Swiss architect, sculptor and designer Max Bill got together with Ernst Moeckel to fashion a door handle for the new Ulm Design College building. Drawing inspiration from the handles common on railway carriage doors in Switzerland, the lever made design history as the Ulm handle x 61mm Johannes Potente lever handle set. The is based on the model. Given the unceasing use of the in commercial ventures, we have now supplemented this design with a return variant conforming to EN Lockset accessories Euro profile escutcheon (pr) Bathroom turn and indicator Lockset accessories Euro profile escutcheon (pr) Bathroom turn and indicator Lockset accessories Euro profile escutcheon (pr) Bathroom turn and indicator Bronze

7 Lever handles x 72mm Santiago Calatrava lever handle set. Santiago Calatrava, the famous Spanish architect has created many of the World s most interesting buildings. From the Tenerife Opera House to the Olympic Sports Complex in Athens, his work has covered various types of building. When working with FSB to create a new lever handle, Calatrava took inspiration from the High Rise residential tower in Malmo that he designed. Based on the form of the Turning Torso sculpture, both the building and the lever handle provide an interesting departure from the conventional designs of their kind x 67mm Christoph Mäckler lever handle set. This design by Frankfurt-based architect Christoph Mäckler draws on a style of lever handle popular in the 19th century. At the same time as the familiar model was formally reworked, the technical preconditions for its use as an FSB project fitting was established. The upshot is the x 61mm Hans Kollhoff lever handle set. The Berlin-based architect Hans Kollhoff devised a handle design for his building projects that conciously incorporates design elements from the 1930s. The Kollhoff Collection has now been rounded off very pleasingly, we feel by a version in Bronze Lockset accessories Euro profile escutcheon (pr) Bathroom turn and indicator Lockset accessories Euro profile escutcheon (pr) Bathroom turn and indicator Lockset accessories Euro profile escutcheon (pr) Bathroom turn and indicator Bronze

8 Lever and pull handles x 61mm Hans Kollhoff lever handle set is a bent-back version of the 41163, a form of styling known as a return to door model. The meets the special requirements for emergency exits and has been tested to EN 179 for this purpose Ø x 420 x 75mm pull handles. Fixing centres at 400mm. PLEASE STATE FIXING SUFFIX (below) x 76 x 3mm push plate R Ø Lockset accessories Euro profile escutcheon (pr) Bathroom turn and indicator Standard fixing proposal Back to back fixing suffix.3 Bolt through fixing suffix.5 Single side fixing suffix.6 Bronze

9 Window handles x 72 x 32.5mm window handle matching the lever handle set. Complete with click-stop mechanism and 7mm spindle x 70 x 32.5mm window handle matching the lever handle set. Complete with click-stop mechanism and 7mm spindle x 69 x 32.5mm window handle matching the lever handle set. Complete with click-stop mechanism and 7mm spindle Bronze

10 Window handles x 74 x 32.5mm window handle matching the lever handle set. Complete with click-stop mechanism and 7mm spindle x 55 x.5mm window handle lock adaptor with 1No spindle extension and M5 50mm length screws Bronze

11 2 Hardware Hinges Closers Locks and latches Cylinders Flush bolts Floor sockets Bronze

12 Hinges Allgood Hardware hinges, where specified correctly to the recommendations of BS EN 1935, are capable of withstanding a severe degree of use. Most are particularly suitable for use with door closers and will help to ensure the smooth operation of the door. The range includes a series of hinges designed specifically for fire doors. marking of these products for their use on fire and escape doors is required. Many Allgood Hardware hinges incorporate the new fully concealed self-lubricating Bearings. They never stick or seize, are totally corrosion proof and, with the factory applied Teflon lubricant, are entirely maintenance-free. Tolerances Positional tolerances of holes are +/- 0.1mm. All other tolerances are subject to a production tolerance of +/- 0.5mm. Standards and Performance Most hinges are suitable for fire doors, are Certifire approved, marked and conform to BS EN 1935 and the requirements of PSA MOB. Allgood hinges are tested with the fixings supplied. Any substitution of these fixings may affect ultimate performance. All CB hinges are guaranteed for years Hinge choice and fixing position It is recommended that three hinges be used on all doors. On heavy doors the load is eventually borne by the three hinges. On light doors the centre hinge reduces warping and whip. The top hinge resists most of the bending forces which result from the door width (the leaf tends to pull away from the frame at the top and towards the frame at the bottom). Where doors are not expected to warp, it is advantageous to position the middle hinge closer to the top one, typically 200mm below. Doors of height above 2100mm should have four hinges per leaf. Again, equal spacing gives maximum resistance to warping and two high and two low gives the best load carrying ability. Recommended hinge loadings For most CB hinges, the maximum recommended load is 120kg for doors up to 9mm wide. It is rare for a newly hung door to have its weight evenly distributed between the hinges. It is more likely that the load will be borne by one hinge which then settles to the point that the next hinge takes a share of the load until eventually all the hinges share the load equally. Because, initially, all the load is on one hinge, they are rated as a single item, the total weight of the door being equal to the rated loading. For doors fitted with backcheck door closers, BS EN 1935 recommends that the actual door mass should be increased by 50% when selecting the hinge, due to the extra forces directed onto the hinges when the door reaches the backcheck position. Maximum door mass/bs EN Grade 40kg/7 60kg/10 100kg/12 120kg/13 160kg/ BB 8064CB 8069CB 48293N 8066CB 8068CB 8069CB 8081CB As door width increases so do the bending forces on the top hinge. For this reason the recommended loading is reduced to accommodate this extra mass. Hinges should be set into accurate mortices to avoid hinge bind. They should also be fitted exactly vertical and in alignment with each other. Door width (mm) Reduction in load capacity % % % Door weight chart (weight, in Kg, per m 2 ) Thickness (mm) Hollow core Pine Mahogany Oak Hollow metal Bronze

13 Hinges 8064CB Concealed twin Newton Bearing butt hinges for doors up to 120kg, pair. 8066CB Concealed twin Newton Bearing butt hinges for doors up to 120kg, pair. 8068CB Concealed twin Newton Bearing butt hinges for metal doors up to 120kg, pair x 100 x 3mm Triple knuckle MARKED Twin concealed self-lubricating bearings Button tipped Jig drilled Maintenance free Totally corrosion proof Smoother action than ball bearings Load bearing capacity to 120kg Certifire approved Satisfy test requirements to BS EN 1935 Grade 13, and is marked Guaranteed for years No.12x32mm spectra coated stainless steel screws to match Finish: TS 100 x 75 x 3mm Triple knuckle MARKED Twin concealed self-lubricating bearings Button tipped For easy routing 10mm radiused corners are available, 8066RCB Jig drilled Maintenance free Totally corrosion proof Smoother action than ball bearings Load bearing capacity to 120kg Certifire approved Satisfy test requirements to BS EN 1935 Grade 13, and is marked Finished with softened edges Guaranteed for years No.12x32mm spectra coated stainless steel screws to match 114 x 114 x 3mm Triple knuckle MARKED Twin concealed self-lubricating bearings Button tipped Template drilled to ANSI with M6x12MT posidrive truncated undercut spectra coated stainless steel machine screws to match Maintenance free Totally corrosion proof Smoother action than ball bearings Load bearing capacity to 120kg Certifire approved Satisfy test requirements to BS EN 1935 Grade 13, and is marked Guaranteed for years Finish: TS Finish: TS Bronze 11

14 Hinges 8069CB Twin Bearing butt hinges for doors up to 200kg, pair. 8075BB Concealed Newton Bearing butt hinges for doors up to 100kg, pair x 93 x 4mm Triple knuckle Twin bearings Button tipped Jig drilled Maintenance free Totally corrosion proof Smoother action than ball bearings MARKED Satisfies test requirements to BS EN 1935 Grade 14, and is marked Load bearing capacity to 200kg For doors with a minimum of 44mm thickness Guaranteed for years No.12x32mm spectra coated stainless steel screws to match Finish: TS 100 x 75 x 2.5mm Triple knuckle Twin self-lubricating bearings Button tipped Jig drilled Plated steel Maintenance free Smoother action than ball bearings Uprated load bearing MARKED These hinges have been incorporated in fire test assemblies which have achieved at least 60 minutes on timber doorsets and 240 minutes on metal doorsets Satisfy test requirements to BS EN 1935, Grade 12, and is marked All finishes have been tested by BSI and have passed 96 hour salt spray tests to BS EN 1670 No.12x32mm spectra coated stainless steel screws to match Finish: TS 12 Bronze

15 Closers Door controls are placed under more arduous conditions of use and abuse than nearly all other items of hardware. It is essential that their operation is smooth, efficient and reliable at all times, especially when used on fire resistant and smoke control doors. Allgood Hardware door controls are produced to the highest standards of design and most have adjustable control features. Allgood plc is a leading UK supplier of adjustable backcheck, overhead door closers including versions that have Certifire approval. Every Allgood Hardware door control carries a 10 year guarantee. These devices are marked. Please ask for our Declaration of Conformity, or visit our website ( The EC Certificate of Conformity for them is 1121 CPD-AD0001. All door controls are manufactured in factories holding accreditation to the BS EN ISO Quality Management System. OVERHEAD Door Closers Most closers are to BS EN 1154:1997 (see main Introduction, Standards for Architectural Hardware) and Certifire approved. Configuration of Door Closers Figure 1 Figure 6 Fire Door Controls Mechanical hold-open devices which permanently hold a door open until physically released are unsuitable for use on fire resisting doors. However, electromagnetic release closers to BS EN 1155 hold open electrically and, when connected to a central fire-alarm system, will allow the door to close automatically in the event of supply failure or alarm activation. Allgood Hardware door releases are fail safe. The door will be released and close immediately when the alarm is set off, either manually or by the automatic smoke or heat sensitive detectors. The door will also be released and closed automatically in the event of power failure. The door can always be closed manually. Specifications Integral hold/release mechanisms (9451 and 9456) have an advantage over standard closing devices combined with electromagnetic door releases, since they do not induce any twisting forces to the door which can lead to warping and twisting of wooden doors (after prolonged use). For further information on these mechanisms, please contact your nearest Allgood office. Regulations Electromagnetic release and swing free door closing devices are accepted by Fire Officers and local authorities and comply with the 1991 Building Regulations Approved Document B, 2000 Edition, Appendix B. Maximum door mass/width The table below shows the door masses and widths as contained in the BS EN 1154 European Standard. Table 1 (from BS EN 1154) Power size of door control Max. mass of hinged leaf Width of door leaf 1 20kg <750mm 2 40kg 850mm 3 60kg 950mm 4 80kg 1100mm 5 100kg 10mm 6 120kg 1400mm 7 160kg 1600mm Bronze 13

16 Closers 9151A Heavy duty overhead door closer with fully adjustable power and adjustable backcheck, as well as latching and speed MARKED Fitting to opening face of door (Fig.1). Integral intumescent protected soffit fixing plate. Power: adjustable EN Power 2 4. Max. door mass/width: see Introduction. Closing speed: fully adjustable and with independent latch action. Backcheck: fully adjustable angle of operation, To limit the opening angle, a doorstop is recommended. Opening angle: up to 180. Fixings: single fixing position. Concealed screws for wood or metal. Special brackets/ plates for metal doors/frames readily available to order. For internal and external doors. 9151ASO Hold-open version: push door approximately 3 past the 90 holding position and release; the door will move back to the 90 position required (not suitable for fire door use). 9151ADC Delayed closing version with minimum 20 second delay between 65 and 90. Maximum 45 seconds. Standards performance Independently tested and complies with the requirements of BS EN 1154: / with backcheck and is marked 1121-CPD-AD0001 (see Standards for Architectural Hardware in the main Introduction). Has been included in many successful 3rd party tests on fire door assemblies to BS EN and BS 476 Pt 22 up to 120 minutes on timber doors and is Certifire approved, for use on certain latched and unlatched assemblies and single and double doors. UL listed. Finish: TA 14 Bronze

17 Closers 9156A Heavy duty overhead door closer with fully adjustable power and adjustable backcheck Underside of headframe 50 Hinge centreline MARKED Fitting to closing face of door (Fig.6). Power: adjustable EN Power 2 4. Max. door mass/width: see Introduction. Closing speed: fully adjustable and with independent latch action. Backcheck: fully adjustable angle of operation, To limit the opening angle, a doorstop is recommended. Opening angle: up to 180. Fixings: single fixing position. Concealed screws for wood or metal. Special brackets/ plates for metal doors/frames readily available to order. For internal and external doors. 9156ASO Hold-open version: push door approximately 3 past the 90 holding position and release; the door will move back to the position required (not suitable for fire door use). 9156ADC Delayed closing version with minimum 20 second delay between 65 and 90. Maximum 45 seconds. Standards performance Has been independently tested and complies with the requirements of BS EN 1154: / with backcheck and is marked 1121 CPD AD0001 (see Standards for Architectural Hardware in the main Introduction). Has been included in many successful 3rd party tests on fire door assemblies to BS EN and BS 476 Pt 22 up to 120 minutes and is Certifire approved, for use on certain latched and unlatched assemblies and single and double doors. UL listed. Finish: TA Bronze 15

18 Closers XX9133 Fully concealed overhead door closer for single action doors. Shown as complete unit, comprising 9133 and 9134AR max min Fully concealed when door is closed. Mechanism only 9134AR finished track and arm must be ordered separately (see right). Power: adjustable power (2 4) to BS EN MARKED 9134AR Finished track and arm for XX9133 and XX9134. Finish: TS Opening angle: maximum 120. Adjustable closing force. Adjustable closing speed. Adjustable latch action. Adjustable hydraulic backcheck. Max. door weight: 130kg Max. door width: 1100mm Min. door thickness: 40mm The length, width and height of mortice for body and slide channel must be increased by 2mm to accommodate the intumescent pack. Certifire rated with intumescent packs for FD30 or FD60 timber fire doors (specify XX9129FP30 or XX9129FP60). Standards Performance Independently tested and complies with the requirements of BS EN 1154: / (9133) and 3 8 6/ (9134) with backcheck and is marked. Has been included in many successful 3rd party tests on fire door assemblies to BS 476 Pt 22, up to 60 mins. An additional intumescent pack is available for custom doors that are (under certain conditions) capable of achieving BS EN 1634 FD60. XX9134 As above, but suitable for doors up to 1400mm wide, 180kg weight and 50mm minimum thickness. Adjustable power (3 6) to BS EN Shown as complete unit, comprising XX9134 and 9134AR max min Bronze

19 Closers XX9135 Fully concealed overhead door closer for double action doors. Shown as complete unit, comprising 9135 and 9135AR MARKED Fully concealed when door is closed. Power: adjustable power (2 4) to BS EN AR Finished track and arm for XX Adjustable closing force. Adjustable closing speed. Adjustable latch action. Adjustable hydraulic back check. 9135AE Finished track and arm for XX9135 with electrical hold-open device. Maximum door weight: 130kg Maximum door width: 1100mm Minimum door thickness: 40mm Finish: TS The length, width and height of mortice for body and slide channel must be increased by 2mm to accommodate the intumescent pack. Certifire rated with intumescent packs for FD30 or FD60 timber fire doors (specify XX9139FP30 or XX9139FP60). Standards Performance Independently tested and complies with the requirements of BS EN 1154: / with backcheck and is marked. Has been included in many successful 3rd party tests on fire door assemblies to BS 476 Pt 22, up to 60 mins. An additional intumescent pack is available for custom doors that are (under certain conditions) capable of achieving BS EN 1634 FD60. Bronze 17

20 Closers 18 Bronze

21 Locks and latches The Allgood Hardware range of locks and latches cover all of the standard security requirements of a building. Allgood Hardware locks and latches are available in cylinder and lever versions and cover all functions. HEAVY DUTY LOCKS AND LATCHES HL72 The HL72 Modular Lock System is a full suite of heavy duty mortice locks and latches designed to support the entire Allgood range of levers, knobs and other unsprung furniture. Each series is based on standard case sizes, allowing simplified door preparation. Many of the models have alternative backsets either to place the lever handle further from the door edge, for aesthetic reasons, or to accomodate knob furniture. Latchbolts can easily be reversed without removing the lock case cover, so the same lock or latch can be specified whatever the closing direction of the door. Rebate components are available for all mortice locks, in 13mm, 19mm and mm sizes, and are suitable for either hand. Most Allgood Hardware mortice locks and latches allow for bolt through fixings for lever handles and roses, and for escutcheons on cylinder/bathroom locks. It is important to check before fixing whether the holes for furniture and/or keyhole or cylinder are required on one or both sides of door. When using a handle on one side only, specify the XX40104B half spindle. Performance standards For the latest information, please visit Many Allgood Hardware locks & latches have been incorporated in successful fire tests to BS EN , BS476 Part 22 and UL10B. Allgood Hardware was included in the PSA Method of Building Programme, 3rd Edition: MOB H3 01. Every Allgood Hardware mechanical product carries a 10 year guarantee. Tolerances All dimensions given are subject to a production tolerance of ±0.5mm. Bronze 19

22 Locks and latches 7204 Vertical mortice latch. a MARKED 38 Three modular case sizes see table below Latchbolt reversible without opening lockcase Unique Griptight follower High quality springs in latch for lever handles Two-way soft action mechanism in latch for knob furniture (i.e. locks with 100mm backset) 60mm backset options Certifire approved, CF mm backset options to BS EN X F 1 B and is marked Forend and strike plate option of square or radius forend and strike plate in spectra coated colour to match pre-formed strike plate reversible strike plate Type AB self-tapping, spectra coated fixing screws provided suitable for both timber and metal Bolt through fixing holes for levers When using a handle on one side only, specify the XX40104B half spindle Rebate conversion set 7245 available for this latch specify 13mm, 19mm or mm Finish: TS 24 b Case sizes Ref. No. Handle Forend a b Lever Square Lever Square K10 Knob Square F60 Lever Radius F80 Lever Radius KF10 Knob Radius Bronze

23 Locks and latches 7208 Vertical mortice bathroom lock. a Three modular case sizes see table below Deadbolt 12mm Latchbolt reversible without opening lockcase Unique Griptight follower 78mm centres High quality springs in latch for lever handles Two-way soft action mechanism in latch for knob furniture (i.e. locks with 100mm backset) Forend and strike plate option of square or radius forend and strike plate in spectra coated colour to match pre-formed strike plate reversible strike plate Type AB self-tapping, spectra coated fixing screws provided suitable for both timber and metal Bolt through fixing holes for levers and turn/emergency release Rebate conversion set 7245 available for this lock specify 13mm, 19mm or mm 24 b Finish: TS Case sizes Ref. No. Handle Forend a b Lever Square Lever Square K10 Knob Square F60 Lever Radius F80 Lever Radius KF10 Knob Radius Bronze 21

24 Locks and latches 72 Lift to lock (L2L) Easy Action privacy lock. Specify 72ASS for full assembly of necessary components The 72 L2L Easy Action privacy lock and components are specially designed and unique to Allgood. The installation is visually clean and simple to use. This hardware is particularly suitable for bathrooms and similar situations where it is desirable to lock the door easily from the inside. Other examples of use are laboratories, darkrooms, bedrooms etc. The inside lever has a dual function. When lifted up it simultaneously locks the external lever and actuates the external indicator. The vertical position of the locked lever very clearly indicates that the door is indeed locked. Depressing the inside lever withdraws both bolts and resets the indicator. An Allgood external indicator and emergency release should be used. Any Allgood lever may be specified. Deadbolt 12mm Latchbolt reversible without opening lockcase Unique Griptight follower 78mm centres High quality springs in latch for lever handles Forend and strike plate option of square or radius forend and strike plate in spectra coated colour to match pre-formed strike plate reversible strike plate Type AB self-tapping, spectra coated fixing screws provided suitable for both timber and metal Bolt through fixing holes for both levers Rebate conversion set 7245 available for this lock specify 13mm, 19mm or mm Finish: TS Case sizes Ref. No. Handle Forend a b Lever Square F60 Lever Radius Bronze

25 Locks and latches 7278 Vertical Euro profile cylinder mortice emergency lock. a MARKED Three modular case sizes see table below 24 b 16 Inside lever handle can withdraw both latch and deadbolt in one action, allowing quick escape for fire and safety reasons, without compromising security, as per Secured by Design Deadbolt high security 20mm single throw Latchbolt reversible without opening lockcase Unique Griptight follower 60mm backset options to BS EN A and is marked 1121-CPD-AEB0015 To BS EN 179 when used in conjunction with approved levers 72mm centres High quality springs in latch for lever handles Forend and strike plate option of square or radius forend and strike plate in spectra coated colour to match pre-formed strike plate reversible strike plate Type AB self-tapping, spectra coated fixing screws provided suitable for both timber and metal Bolt through fixing holes for lever and cylinder Lever handle on inside only requires the XX40104B half spindle Rebate conversion set 7245 available for this lock specify 13mm, 19mm or mm Finish: TS Case sizes Ref. No. Handle Forend a b Lever Square Lever Square K10 Knob Square F60 Lever Radius F80 Lever Radius KF10 Knob Radius Bronze 23

26 Locks and latches 7279 Vertical Euro profile cylinder mortice lock. a MARKED Three modular case sizes see table below Cylinder can withdraw both latch and deadbolt in one action offers convenience and safety combined with security Deadbolt high security 20mm single throw Latchbolt reversible without opening lockcase Unique Griptight follower 60mm backset options Certifire approved, CF mm backset options to BS EN X F 1 K A 3 0 and is marked 72mm centres High quality springs in latch for lever handles Two-way soft action mechanism in latch for knob furniture (i.e. locks with 100mm backset) Forend and strike plate option of square or radius forend and strike plate in spectra coated colour to match pre-formed strike plate reversible strike plate Type AB self-tapping, spectra coated fixing screws provided suitable for both timber and metal Bolt through fixing holes for levers and cylinder When using a handle on one side only, specify the XX40104B half spindle Rebate conversion set 7245 available for this lock specify 13mm, 19mm or mm Finish: TS 24 b Case sizes Ref. No. Handle Forend a b Lever Square Lever Square K10 Knob Square F60 Lever Radius F80 Lever Radius KF10 Knob Radius Bronze

27 Locks and latches 7281 Vertical Euro profile cylinder mortice nightlatch. a MARKED 38 Three modular case sizes see table below Anti-thrust bolt inhibits the latch from being forced back when in the locked position Latchbolt reversible without opening lockcase Unique Griptight follower 60mm backset options Certifire approved, CF mm backset options to BS EN A and is marked 1121-CPD-AEB0015 To BS EN 179 when used in conjunction with approved levers 72mm centres High quality springs in latch for lever handles Two-way soft action mechanism in latch for knob furniture (i.e. locks with 100mm backset) Forend and strike plate option of square or radius forend and strike plate in spectra coated colour to match pre-formed strike plate reversible strike plate Type AB self-tapping, spectra coated fixing screws provided suitable for both timber and metal Bolt through fixing holes for levers and cylinder A XX40104B half spindle should always be specified with this lockcase Rebate conversion set 70 available for this lock specify 13mm, 19mm or mm Finish: TS 24 b Case sizes Ref. No. Handle Forend a b Lever Square Lever Square K10 Knob Square F60 Lever Radius F80 Lever Radius KF10 Knob Radius Bronze

28 Locks and latches 7282 Vertical Euro profile cylinder mortice apartment lock MARKED Lever handles on both sides will withdraw latch bolt. If deadbolt is projected, the inside handle only will withdraw both bolts. Door then remains unlocked until manually re-locked by key from outside or turn from inside. Satisfies Building Regulation requirements for multi-occupancy buildings Single case size as illustrated Latchbolt reversible without opening lockcase 60mm backset options to BS EN A and is marked 1121-CPD-AEB0015 To BS EN 179 when used in conjunction with approved levers Deadbolt high security 20mm single throw Follower 2 part to enable security and safety functions to operate High quality springs in latch for lever handles Forend and strike plate option of square or radius forend and strike plate in spectra coated colour to match pre-formed strike plate reversible strike plate Type AB self-tapping, spectra coated fixing screws provided suitable for both timber and metal Bolt through fixing holes for levers and cylinder Rebate conversion set 7245 available for this lock specify 13mm, 19mm or mm Finish: TS Case sizes Ref. No. Handle Forend a b Lever Square F60 Lever Radius Bronze

29 Locks and latches 7286 Vertical Euro profile mortice deadlock. a MARKED Three modular case sizes see table below b Deadbolt high security 20mm single throw 16 60mm backset options Certifire approved, CF mm backset options to BS EN X F 1 K A 0 0 and is marked Forend and strike plate option of square or radius forend and strike plate in spectra coated colour to match supplied with pre-formed box strike for common frame preparation, a lipped strike is available as Type AB self-tapping, spectra coated fixing screws provided suitable for both timber and metal Bolt through fixing holes for cylinder escutcheon Rebate conversion set 7245 available for this lock specify 13mm, 19mm or mm Finish: TS Case sizes Ref. No. Forend a b Square Square Square F60 Radius F80 Radius F10 Radius Bronze 27

30 Cylinders 7418A Euro profile double cylinder with key operation on both sides. 7419A Euro profile cylinder with key operation on one side and unique Allgood turn on the other. 7420A Euro profile single cylinder with key operation on one side only. 17 W V V 17 W V 17 W Variations (mm) V W a (standard) b c Finish: TA Variations (mm) V W a (standard) b c Finish: TA Variations (mm) V W a (standard) b c Finish: TA Advanced mechanical cylinder series Features and their benefits Patented 6 pin cylinder with hardened drivers and body insert 63 or 41.5mm length cylinder supplied as standard. If door thickness is greater than 49mm, please state on your order Available in three lengths, to suit a wide range of door thicknesses. A wider range of cylinder lengths is available to special order If lock is installed off-centre, please contact your nearest Allgood office for assistance Tested to BS EN 1303, Grade 6 durability, Grade 6 security Double paracentric keyway overlapping in three positions; resists picking Mushroom type drivers; make aligning of the pins by a picking tool almost impossible Off-centre cam protrudes from the cylinder body when the key is removed; prevents cylinder being driven through the lockcase by severe force such as by a hammer Hardened steel anti-drill pin at each end resist drilling through body PZ anti-pick pins provide even greater resistance to picking Supplied with 2 keys as standard (unless specified). Additional keys are available from Allgood providing greater assurance of security Available individually keyed or as part of a master key suite to customer requirements Allgood can also provide a construction master key system affording convenience during the construction phase and the assurance of total security on building completion, without the need to change over cylinders It is essential that only special aerosol lubricant XX9568 be used in and around the cylinder/cylinder & turn, and the key. Do not use oil, grease or other lubricants. 28 Bronze

31 Flush bolts x mm lever action flush bolt with dovetail shaped return, and flange to conceal mortice. Finish: TA /0Q Complete bolt set, comprising 2x7010 bolts, 7051 easy clean floor socket and intumescent pack for FD30 and FD60 fire doors. Finish: TA /2Q As above but comprising 1x7010 and 1x7012 bolts. Finish: TA /3Q As above but comprising 1x7010 and 1x7013 bolts. Finish: TA Bronze 29

32 Flush bolts x mm lever action flush bolt with dovetail shaped return, and flange to conceal mortice. Finish: TA /2Q Complete bolt set, comprising 2x7012 bolts, 7051 easy clean floor socket and intumescent pack for FD30 and FD 60 fire doors. Finish: TA /3Q As above but comprising 1x7012 and 1x7013 bolts. Finish: TA Bronze

33 Flush bolts x mm lever action flush bolt with dovetail shaped return, and flange to conceal mortice. Finish: TA /3Q Complete bolt set, comprising 2x7013 bolts, 7051 easy clean floor socket and intumescent pack for FD30 and FD60 fire doors. Finish: TA Bronze 31

34 Flush bolt floor sockets 7051 Easy clean floor socket suitable for wood and stone. For use with flush bolts. Complete with rawlplugs Automatically supplied with flush bolt kits Finish: TA 32 Bronze

35 3 Accessories Escutcheons Bathroom turns Door stops Flush pulls Signs Bronze 33

36 Escutcheons, bathroom turns and door stops Ø x 7mm escutcheon pierced for euro profile cylinder Ø x 7mm rose and bathroom turn with emergency release indicator. Complete with 8mm spindle Ø x 20mm floor mounted door stop, complete with screw and rawlplug. Indicator Ø x 10mm floor mounted plate for use with Bronze

37 Door stops and flush pulls Ø x 60mm wall mounted door stop, complete with screw and rawlplug x 40 x 11.5mm flush pull Ø45 Ø Bronze 35

38 Signs Ømm Male international symbol Ømm sign. Automatic fire door keep clear to BS Ømm Female international symbol Ømm sign. Fire door keep locked to BS Ømm sign. Unisex international symbol Ømm sign. Fire door keep shut to BS Ømm Disabled international symbol. 36 Bronze

39

40 Allgood plc Tel: web: Euston Road London NW1 3AQ Telephone Facsimile /83 Brearley Street Birmingham B19 3NT Telephone Facsimile Queen Street Manchester M2 5HX Telephone Facsimile Buchannan Gate, Stepps Glasgow G33 6FB Telephone Facsimile Allgood Worldwide Ltd Telephone +44 (0) Facsimile +44 (0) info@allgoodww.com web: All information and details in this brochure are correct at time of going to press. However, Allgood plc reserves the right to change the product specifications without notice. Allgood plc. 01/07