PREMIUM RANGE OF WOODHEATERS

Transcription

1 INNOVATION PERFORMANCE EFFICIENCY PREMIUM RANGE OF WOODHEATERS No other woodheater combines a clean burn, high performance and durability quite like a Clean Air Woodheater

2 INNOVATION PERFORMANCE EFFICIENCY Clean Air Wood Heaters are designed and manufactured in Australia especially for Australian winters, and are perfect for energy efficient home heating. Our longer burn times, genuine overnight burn rates, lower emissions, higher efficiencies and better air flow throughout your home simply mean that Clean Air is the perfect choice when looking for a quality wood heater. FEATURES Unique quad burn and firebox air redirection system Exceptional clean burn technology Exclusive heat exchanger tubes 6mm firebox fully welded and reinforced 25mm refractory liners Large, flat glass door 3 speed fan standard on all models Stainless Baffle with a 10 year Warranty (medium & large) 10 Year Structural Firebox Warranty greater performance reduces emissions Enhances natural hot airflow Excellent strength, integrity and durability protect and enhance your fire will remain clean during normal operation offers a beautiful view of your fire directs air over the top of the firebox to increase heat output directs air through the heat exchanger system (medium and large models) boosts heat into the room less heat escaping through the flue lower maintenance requirements peace of mind BENEFITS Clean Air's innovative use of the latest technology has led to a wood heater range with leading edge firebox design and quad burn system that outclasses the rest of the field in heat output, efficient use of fuel, environmental performance, and style. A Clean Air wood heater provides true value for money by using less wood than standard wood heaters for comparable performance. Clean Air has designed a sophisticated wood heater range that well exceeds EPA low emission expectations without compromising heater performance in fact, it increases heat output and efficiency. MODEL AVE EFFICIENCY MAX EFFICIENCY MIN EMISSIONS AVE PEAK POWER APPROX HEAT CAP Large 63% 69.4% 1.4G/KG 21.7KW 30SQ Medium 68% 73.6% 1.5G/KG 14.2KW 25SQ Small 61% 71.5% 0.4G/KG 10.9KW 18SQ Clean Air wood heaters are designed and tested to the highest Australian Standards and EPA requirements, and to demonstrate our commitment to the protection of the environment, Clean Air contributes to Land Care for the conservation of Australia's renewable fuel resources through the planting of more trees. Low maintenance and economic heating performance are expected of a wood heater, and Clean Air has exceeded expectations a wood heater that requires little more than a load of wood and the turn of a knob, but which produces an amazing amount of heat for an exceptionally long period.

3 Freestanding Wood Heaters Large Console The powerful Large Freestanding Clean Air wood heater is designed for the most spacious of Australian homes, heating from 2630 squares. Like all Clean Air wood heaters it offers superior performance, efficient use of firewood and long burn times, making it the ideal choice for heating the whole house on a cold winters' night. The Clean Air Console uses the advanced firebox design for which Clean Air is famous and the medium and large sizes have a removable stainless steel baffle plate complete with a 10 year warranty. The threespeed fan standard to all models boosts heat to every corner, efficiently keeping your home warm all day and night with a minimum of fuss. The Large Console is available in a range of colours and with an optional gold or chrome door. Height Width Depth Weight 855mm Heat Cap 30sq 825mm Rear 150mm 610mm Side 350mm 230kg Corner 50mm Rear to centre flue 230mm Hearth Size 450x1040x6 Medium Console The Medium Console is generously designed for the average 1525 square home, and uses the advanced Clean Air firebox design for outstanding performance and durability. The firebox's heat exchange system, including the threespeed fan, enhances natural convection and is the signature of Clean Air wood heaters. All Clean Air Woodheaters perform well below EPA low emissions requirements without compromising their overnight burn capacity. The heat exchange system allows you to switch the fan off when burning low (such as overnight) and still maintain excellent air circulation. The Medium Console is available in a range of colours and with an optional gold or chrome door. Height Width Depth Weight 805mm Heat Cap 25sq 725mm Rear 100mm 560mm Side 300mm 180kg Corner 50mm Rear to centre flue 230mm Hearth Size 350x940x6 (Pictured with Chrome Door option) Small Console Don't be fooled by the name; compared to other smaller sized wood heaters the Clean Air Small Console is in a class of its own for efficiency and performance. The 6mm steel reinforced firebox, firebrick lining and threespeed fan as standard make this wood heater the ideal choice for heating a house of up to 18 squares. The Small Console uses slightly different firebox technology to the remainder of the Clean Air wood heater Premium range, yet maintains outstanding low emission levels and long burn times without sacrificing heating performance and efficiency. The Small Console is available in a range of colours and with an optional gold or chrome door. Height Width Depth Weight 755mm Heat Cap 18sq 675mm Rear 100mm 520mm Side 300mm 150kg Corner 50mm Rear to centre flue 190mm Hearth Size 350x890x4.5

4 Fireplace Inserts Standard This is where CLEAN AIR exceeds the rest, never before has so much heat been available from a fireplace. Fireplace Inserts must be installed into a full brick masonry chimney. Clean Air's Fireplace Inserts are perfectly suited to an existing, unused open fireplace. Our fireplace Inserts combine innovative design and functionality with style and sophistication ensuring longer, more even burning. The traditional fireplace has always been inefficient, smoky and messy, but often has too much charm to demolish. Take advantage of that wasted space by installing a Clean Air Fireplace Insert and enjoy all the benefits of a slow combustion wood heater. Clean Air technology easily exceeds EPA emissions requirements without compromising heat output, through the unique and exclusive quad burn and heat exchange systems that enhance natural convection and maximise heating efficiency and performance. Large Fireplace Insert The Large Standard Fireplace Insert has a sleek, contemporary design and is intended for the larger home of 2530 squares of open plan living. The large and medium Fireplace Inserts use the advanced Clean Air Firebox technology to produce a longer, cleaner heat with lower emissions, well exceeding EPA requirements. The Large Fireplace Insert is ideal for use in the family home and, unlike open fireplaces, is designed for high heat output and safe overnight burning. The Large Fireplace Insert is available in a range of colours and with an optional gold or chrome door. (Pictured with Gold Door option) Medium Fireplace Insert The Medium Standard Fireplace Insert is perfectly suited to the average open plan home of 1525 squares. The outstanding performance of the Clean Air Standard Fireplace Insert is typical of how Clean Air Wood Heaters use advanced firebox technology and construction to provide longer burn times, lower emissions and a more even temperature through the day and overnight. The Medium Fireplace Insert is available in a range of colours and with an optional gold or chrome door. Small Fireplace Insert The Small Standard Fireplace Insert is a compact yet powerful wood heater ideal for homes up to 18 squares and uses slightly different firebox technology to the rest of the premium range. The Clean Air Fireplace Insert adds functionality to an unused fireplace, reduces heating costs, and enhances the value and appeal of any room. A Clean Air wood heater is the choice for people looking for the safety, convenience and environmental features of a clean burning, fully enclosed and controllable woodheater. The Small Fireplace Insert is available in a range of colours and with an optional gold or chrome door.

5 Fireplace Inserts Edwardian & Victorian Large Edwardian Fireplace Insert The Clean Air Edwardian Insert adds timeless elegance and grace to any home, and with the addition of an optional timber mantelpiece, it cannot be bettered for presentation, heating performance and efficiency. The Edwardian Insert has all the design features characteristic of a Clean Air wood heater. It uses Clean Air's advanced firebox technology to produce a longer, cleaner heat with lower emissions, well exceeding stringent EPA requirements. The Large Edwardian Insert will comfortably heat up to 30 squares of open plan living. The Large Edwardian Insert is available in a range of colours and with an optional gold or chrome door. Medium Edwardian Fireplace Insert The sleek and stylish Medium Edwardian Insert is ideal for efficiently heating open spaces up to 25 squares, and creates a warm and welcoming centerpiece in any room. With the innovative firebox design unique to Clean Air wood heaters, the Edwardian Insert uses exceptional clean burn technology, has a long overnight burn capacity and low emissions, and immediately draws the eye as the focus your home. The Medium Edwardian Insert is available in a range of colours and with an optional gold or chrome door. Large Victorian Fireplace Insert The very picture of luxury, oldworld elegance and sophistication, and beautifully finished with an optional mantelpiece, the Large Victorian Insert commands attention as you walk into the room, and is available with or without the cast trim on the arch. The Victorian Insert features the superior firebox design typical of Clean Air wood heaters, and the Large size achieves a maximum heating capacity of 30 squares of open space living. The Large Victorian Insert is available with an optional cast trim and a gold or chrome door. Medium Victorian Fireplace Insert With traditional charm that never goes out of fashion, the Victorian Insert is ideal for your period home, to finish off your renovation, or if you simply like the style. The long burn times of Clean Air's slow combustion wood heaters ensure maximum heat for minimum cost, day and over night. The Medium Victorian Insert comfortably heats up to 25 squares of open plan living. Install the Victorian Insert into an existing fireplace nothing could be easier. The Medium Victorian Insert is available with an optional cast trim and a gold or chrome door. (Pictured with optional trim to arch)

6 Z Systems Zero Wood Heater Create Something Special Transform a dull blank wall into a magnificent feature fireplace. The Clean Air Zero wood heater is the inbuilt fireplace solution you've been looking for without a fireplace! Large Standard Zero pictured with Balmoral Mantelpiece The market leading ZSystem is Clean Air's patented method of installing an inbuilt fireplace when you want the look, but not the expense, of a conventional fireplace and chimney. Clean Air were the first to introduce a Zero slow combustion wood heater in Australia, and still lead the way with an innovative one piece unit, no extra metal boxes are required. Simple Timber Frame Choose Your Model A Zero wood heater is available in sizes medium or large, and with a Standard, Victorian or Edwardian fascia. Large Edwardian Zero pictured with Edwardian Mantelpiece Simple Timber Frame The ZSystem is simple and inexpensive to install no bricks and mortar and can even be fitted directly onto a timber floor using the appropriate floor plate. Importantly, no major structural alterations are required. No need for brickwork Finish The Look To really create something special, Clean Air has a selection of mantelpieces to suit any taste, from period style to a more modern look. The Clean Air Zero ZSystem is a highly efficient, high performance fireplace solution that will add real comfort and tremendous value to your home. Large Victorian Zero pictured with Victorian Mantelpiece Mantelpieces are available in three designs with a stained timber or painted finish. Villaboard Surround ZSystem measurements and specifications are not included in this brochure. Please contact your authorised dealer or Cleanair Woodheaters for the complete ZSystem specifications

7 Unique Firebox Design Firebox Heat Exchanger and Quad Burn Systems for Cleaner, Longer Burns What makes a Clean Air Wood Heater unique is the advanced firebox design, which generates a longer, cleaner heat, longer burn times and lower emissions. The quad burn and heat exchange system and removable stainless steel baffle are all part of the unique design that makes Clean Air Wood Heaters leaders in design excellence The secret is in the heat exchanger system, which enhances natural airflow and creates cleaner and more efficient heat using less fuel. The stainless steel baffle holds the gases within the firebox and the quad burn system brings in more air, igniting the gases and enabling their total burn. What this means is a significant reduction in emissions from a Clean Air Wood Heater. All Clean Air wood heaters perform well below the Australian Standard of allowable emissions, and offer increased efficiency and heat output. The Clean Air exclusive Venturi System allows continuous airflow around the wood heater even when the fan is not operating. This is a great advantage for extra long overnight burns. The threespeed fan standard in all Clean Air wood heaters, is a design feature that directs air over the top of the ribbed firebox, increasing heat output and, in the medium and large models, also directs air through the heat exchanger system speed industrial fan 11 CONTINUAL FLAME REDIRECTION 2. Fan forced or natural airflow 3. Rear Air Deflector for better air redirection through Exchangers Tubes 4. Heated air exiting Heat Exchanger Tubes 5. Heated air exiting from around Firebox 6. Larger door glass 7. Preheated primary combustion air passes across glass and into fire Secondary air introduced at rear of Firebox for a balanced and more complete burn 9. Tertiary air introduced on sides of Firebox for true triple burn and total burn of gases 10. Heat Exchange Tubes inclined to the front to enhance natural air flow Gases finally exit via Flue 12. Continual Flame Redirection 13. Stainless Steel Baffle The Firebox with a difference more steel, more ribbing, greater efficiency, longer burn times and lower emissions. Clean Air Wood heaters are the perfect choice for energy efficient home heating. The following graph demonstrates how Clean Air wood heaters provide more even heating cycles with longer burn times and a cleaner burn, offering a more constant temperature. Conventional 9 hour burn cycle CLEAN AIR WOODHEATERS BURN LONGER AND CLEANER. TEMPERATURE OTHER WOOD HEATERS 0 HRS 3 HRS 6 HRS 9 HRS 12 HRS * HRL Technology Pty Ltd test AS 4012/ /11/98 Metallic Brown Pewter Golden Fire Brown Mahogany Moss Green Metallic Black Charcoal Blue Metallic

8 INNOVATION PERFORMANCE EFFICIENCY Clean Air Woodheating's Environmental Commitment Clean Air Wood Heaters shares your concern for our precious environment and the protection of our natural resources. We use the latest technology to design the most advanced and fuel efficient firebox possible, and continue to research and develop new and improved ways to further improve wood heater efficiencies to better protect our environment. All Clean Air wood heaters exceed the low emission expectations of the Environmental Protection Authority, and are compliant with Australian Standards 4012 and 4013 as tested by HRL, an independent Testing Authority. Australia has some of the toughest standards in the world for wood heating. To demonstrate further our commitment to environmental protection, Clean Air Wood Heaters contributes to Land Care Australia for the planting of more trees for future fuel supplies and cleaner air. WOOD HEATING Naturally Fireplace Insert Model Specifications A FIREPLACE H = HEARTH C B E F W = WIDTH D E = CABINET F = OVERALL HEIGHT Small Insert Medium Insert Large Insert Med. Vic Insert Lge. Vic Insert Med. Edwardian Lge. Edwardian A B C D E F G H R S W APPROX. HEAT CAP 18sq 25sq 30sq 25sq 30sq 25sq 30sq WEIGHT 120kg 147kg 184kg 147kg 184kg 147kg 184kg Disclaimer All information is correct to the best of Clean Air Woodheating's knowledge at the time of printing. Clean Air Woodheaters rely on the reports from Testing Authorities in any claims made regarding adherence to Australian Standards and EPA requirements. Clean Air Woodheating accepts no liability for the Testing Authority's interpretation of AS/NZ Details provided in this brochure regarding the installation of a Zero System are for information purposes only and should not be relied upon as full installation instructions. Heating capacities may vary according to firewood species and moisture content; climatic conditions and home construction; individual room or home dimensions; and insulation levels. The Manufacturer reserves the right to alter designs and specifications at any time. 10 Year Firebox Warranty Clean Air Woodheaters offer a 10 year structural warranty on the Firebox as standard over the entire wood heater range. (Please refer to the Operating Instructions for more information) Your Authorised Clean Air Dealer is Clean Air Woodheating Pty. Ltd. ABN: McDougall Road Sunbury VIC 3429 Tel: Fax: sales@cleanairwoodheaters.com.au Web: