NFN26 User Manual NFN26. Based on Atom N2600 processor computer. One Brief introduction

Transcription

1 NFN26 User Manual One Brief introduction NFN26 is a based on Intel Atom architecture, ultra-low power consumption, with compact structure, adopts all-aluminum alloy shell, integrates NM10 Express chipset, is an application used in digital advertising network equipment and control box. It uses the currently most popular Intel Atom N2600 dual-core 1.6GHz processors, supports 1080P video playback, L256 programmable watchdog. Picture Mini shape, ultra low noise, body heat dissipation Adopt fanless design, aluminum alloy shell chassis,small size, can be applied to various small space. Inboard Intel Atom Processor Using Low Power Atom N2600 dual core processor, TDP 6.5W, Using Intel NM10 Express Chipset. WIFI Wireless network card Optional

2 Two Interface indicating diagram Front View POWER RESET HDDLED USB1-2 Back COM1-2 Cable Line-OUT USB2.0 LAN 1-2 VGA HDMI DC12V-IN COM3-4

3 Three Size 172x107x54 (LxWxH)

4 Four Hardware Specification System CPU:Atom N2600 Dual Core Processor 6.5W Chipset:Intel NM10+ICH7 BIOS:AMI 16MB Flash ROM Memory:1*204Pin DDRⅢSO-DIMM slot, support 1066/800MHz DDRⅢ RAM, The max. 2GB Display Display Chip:Intel GMA3600 display controller Memory size: dynamic sharing system memory as video memory, the maximum can reach 224MB Display Port :VGA,HDMI VGA: standard DB15 (Rear Panel),support CRT,the max. Resolution 2048x1536 HDMI:HD Media (Rear Panel)support the max.resolution1920x1080 VGA+HDMI: to realize the independent dual display synchronously Ethernet Network Controller :REALTEK 8111E chip LAN Port: 2*RJ_45( Rear Panel ) Speed:1000Mbps Support Wake-On-LAN(WOL) WIFI (Optional ) Storage 1 *2.5 HDD Space, can install SATAⅡhard disk 1 *Mini SATA Slot, support SSD AUDIO Chip:adopt ALC662 audio controller chip,provide Line out,mic IN Port:1*Line out hole(rear Panel) Feature:support HD 6-Channel output

5 I/O I/O Chip:ITE IT8782F COM :6 *DB9 standard Port,support RS232 USB: 4 *USB,USB 2.0 standard System Switch POWER switch(front panel) RST switch(front panel) Indicator light Power Indicator(front panel) Hard Disk Indicator(front panel) Cooler System Fanless full-enclosed cooling system Power DC +12V Input Watchdog Support hardware reset function (L256, 0~255 seconds) Environment and Physical characteristics Seismic test:gb/t Work Temp:0 ~50 Humidity:5%~90% (relative humidity; non-condensing) Storage Temp.:-10 ~60 Structure: aluminum alloy shell Size: 172x107x54 (Lx Wx H) Installation : desktop or wall hanging installation Weight:2.0Kg±0.5Kg

6 Five Interface instructions 1 Audio(Line-out) NFN26 adopt ALC662 audio decoder chip, support 6 channel audio, on the rear panel provides the audio output jack 1 standard (Line-out). 2 High definition multimedia interface(hdmi) NFN26 provides 1*HDMI Standard Port,transfer No audio signal compression and high resolution video signal.support 1080p video and 6 channel audio signal. 3 VGA Port(VGA) NFN26 provides 1*15Pin standard VGA, Can be connected to all of the standard VGA interface display.

7 4 Network Port(LAN1 LAN2) NFN26 provides 2*RJ-45 gigabit Ethernet Ports, LILED and ACTLED are green and yellow LED at the sides of the Ethernet port. Showing LAN activity state. ACTLED LILED(green)state Function (yellow) Function state Bright green(100mbps) yellow(1000mbps ) Valid Connection lightning The network is connected, ongoing data transmission Not bright Invalid Connection or close Not bright No network connection and data transfer 5 USB Port(USB) NFN26 provides 2 standard, compatible with USB2.0 specification, support plug and play in accordance with the norms of USB equipment. If you don't want to use this interface, can be set to disable the USB interface in BIOS. USB Interface definition Pin Signal Pin Signal 1 VCC 2 VCC 3 USB_P - 4 USB_P - 5 USB_P + 6 USB_P + 7 GND 8 GND

8 6 COM(COM1\COM2\COM3\COM4\COM5\COM6) NFN26 provides 6*DB9 standard COM Ports,support RS232, COM1/COM2 support +5V +12V output voltage. COM Interface definition Pin Signal Description 1 DCD Carrier detection 2 RXD Receive data 3 TXD Send data 4 DTR Data terminal ready 5 GND System ground 6 DSR The data ready 7 RTS A request to send 8 CTS Clear to send 9 RI Ring indicator