LASER SCANNING METROLOGY SURVEY
|
|
- Letitia Gaines
- 7 years ago
- Views:
Transcription
1 LASER SCANNING METROLOGY SURVEY
2 TERRESTRIAL LASER SCANNING 3D Spatial was an early adopter of Terrestrial Laser scanning technologies and has been at the forefront of providing customised and unique laser scanning solutions for over five years. 3D Spatial has successfully carried out many laser scanning projects for large scale as-built brownfield surveys for the survey and documentation of Process, Power and Piping facilities as well as the mining and raw materials management environments. Our team of terrestrial laser scanning professionals provide expert consultation for any As-Built Survey with the necessary level of survey control being implemented to ensure the highest accuracies are maintained throughout the survey environment. modelling requirement. Our team of 3D CAD modellers are highly trained to perform the most complex as-built modelling and documentation projects and are fluent in a wide range of design platforms including AutoCAD, Bentley Microstation and many Mechanical CAD packages such as Inventor and Solidworks and Unigraphics NX. With 3D laser scanning, 3D Spatial has developed a safer, faster and more accurate alternative to traditional surveys within the mining and industrial environments. Typical applications of 3D Spatials terrestrial laser scanning capabilities include: Large scale as-built laser scanning of brown-field sites High definition surveys for structural clearance and clash detection Full as-built pipe work modelling with advanced export capability Stability monitoring, Change detection and deformation modelling Fast and safe stockpile surveys, with volumetric accuracies of approximately ±1%. Remote and detailed modelling of underground stopes. Pre and post blast profiles to determine blast efficiencies. Specialised internal stockpile surveys and Silo storage analysis LASER SCANNING METROLOGY SURVEY
3 INDUSTRIAL METROLOGY 3D Spatial offer a wide range of industrial metrology solutions allowing precise 3D measurements with accuracies as high as +/- 0.02mm and operating volumes of over 100m. 3D Spatial operates a range of specialised portable industrial metrology hardware and software including Laser Trackers, Total Stations, Triple-Plane-Laser Alignment Systems, Portable Co-ordinate measuring arms and Close range Laser Scanners in order to offer an unprecedented level of precision to our clients. Common examples of Industrial Metrology Surveys are: Rolling Mill and Conveyer Alignments Aerospace and Automotive tooling and part verification Robot Cell programming and calibration Marine structure fabrication and assembly Turbomachinery shaft alignments and split face analysis Calibration of Machining centres and large lathe beds Static and Dynamic Deformation analysis CAD to Part dimensional Inspection With the added capability of Close Range Laser Scanning facilities, 3D Spatial brings a new range of Laser measurement systems with the capture of millions of discrete measurements in a short period of time to provide comprehensive dimensional analysis and reporting to meet the most demanding 3D measurement tasks. Flatness, Roundness, Squareness, Straightness, Concentricity, Parallelism, Circularity and Cylindricity are just some of the commonly performed geometric checks performed by our team of industrial metrology specialists. Improvements in machine wear, reduced shutdown times and rapid mobilisation are just a few of the numerous benefits of 3D Spatial industrial measurement services. LASER SCANNING METROLOGY SURVEY
4 LASER SCANNING METROLOGY SURVEY
5 LASER SCANNING METROLOGY SURVEY
6 DIMENSIONAL INSPECTION Dimensional Inspection is a specialised subset of our Industrial metrology services and used throughout the manufacturing industry as a tool for the verification of fixtures and tooling as well as a quality control tool for inspection and dimensional conformance of production parts. The 3D measurement data from our 3D scanners and Portable co-ordinate measuring machines provide comprehensive definitions of a physical object and allow for the visualisation and analysis of the finest details such as warpage and manufacturing defects giving our clients the utmost confidence that a part meets and exceeds specifications. Typical examples of dimensional inspection include: CAD to Part Analysis Fixture Calibration Tool wear analysis Colour deviation Maps Geometric Dimensioning and Tolerancing (GD&T) First article inspection and conformance reports Statistical Process reports Thanks to our large portfolio of hardware and software solutions offering both contact (probing) and noncontact (scanning) measurement capabilities, 3D Spatial has the capability to tailor our dimensional inspections to meet a clients specific requirements. Over the years we have conducted hundreds of dimensional inspection projects ranging in size from microns to many metres throughout a large cross section of industries around the world. LASER SCANNING METROLOGY SURVEY
7 REVERSE ENGINEERING & AS BUILT MODELS Reverse Engineering is the process of measuring a part or object and creating and CAD model of that part that accurately reflects how it was to be designed originally (Design Intent) and is scalable across our various disciplines from the smallest Aerospace components to the largest Plant and everything in between. For each unique project, our engineers select the best technologies to utilise for a project and work closely with the client to ensure a successful outcome that exceeds expectations. In addition to our comprehensive hardware portfolio, powerful software also plays an integral part of each dimensional inspection and reverse engineering process. 3D Spatial has implemented advanced software processing tools such as Polyworks, Rapidform and Pointools amongst others for the capture and development of as-built CAD data suitable for use with most CAD platforms. 3D Spatial team of design engineers have extensive experience in a diverse range of applications and disciplines including: Automotive and Aerospace components Legacy part repair and re-manufacturing Documentation and archiving Casting redesign and optimisation Turbomachinery and Power Generation Architecture and BIM applications As-built industrial plant modelling Marine design Toolmaking and Mould design Consumer product design Medical devices and custom fit products LASER SCANNING METROLOGY SURVEY
8 LASER SCANNING METROLOGY SURVEY PH: (03) MELBOURNE OFFICE LEVEL 2, 252 GRAHAM STREET PORT MELBOURNE, VICTORIA, 3207
DESIGN & PROJECT MANAGEMENT
AIM recognises that the success of any project depends upon the presence of a robust project management process and structure. In recent years the company has made considerable investment in personnel,
More informationAutomotive Applications of 3D Laser Scanning Introduction
Automotive Applications of 3D Laser Scanning Kyle Johnston, Ph.D., Metron Systems, Inc. 34935 SE Douglas Street, Suite 110, Snoqualmie, WA 98065 425-396-5577, www.metronsys.com 2002 Metron Systems, Inc
More informationPRODUCT BROCHURE 7.10.7 SF. Shop-Floor Coordinate Measuring Machine
PRODUCT BROCHURE 7.10.7 SF Shop-Floor Coordinate Measuring Machine HEXAGON METROLOGY 7.10.7 SF Quality Insight at the Point of Production The Hexagon Metrology 7.10.7 SF is like a machine tool for quality
More informationPRODUCT BROCHURE SPATIAL ANALYZER. Powerful, traceable and easy-to-use metrology and analysis software
PRODUCT BROCHURE SPATIAL ANALYZER Powerful, traceable and easy-to-use metrology and analysis software SPATIAL ANALYZER SpatialAnalyzer (SA) is a powerful, traceable and easy to use metrology and analysis
More informationIndustrial Metrology and Engineering Applications in the Wind Turbine Industry
Industrial Metrology and Engineering Applications in the Wind Turbine Industry 1. Company Introduction M-7 Technologies is a privately owned, ISO 9001 certified company offering engineered solutions for
More informationCREAFORM METROLOGY SERVICES
METROLOGY SOLUTIONS CREAFORM METROLOGY SERVICES BEYOND MEASUREMENT. With more than 10,000 metrology services projects to its credit, Creaform has earned a reputation for effectiveness, quality and professionalism.
More informationIntegration Services
Integration Services EXPERIENCED TEAM ADVANCED TECHNOLOGY PROVEN SOLUTIONS Integrations for large scale metrology applications Metris metrology to streamline your CAPABILITIES Advanced systems design Engineering
More informationApplication Example: Quality Control of Injection-Molded Parts
Application Example: Quality Control of Injection-Molded Parts Measuring Systems: ATOS Keywords: Optical 3D measuring technology, mold try-out, first article inspection, form and dimension inspection of
More informationTHE PORTABLE 3D SCANNERS FOR INDUSTRIAL APPLICATIONS
METROLOGY SOLUTIONS THE PORTABLE 3D SCANNERS FOR INDUSTRIAL APPLICATIONS PORTABLE 3D MEASUREMENT SOLUTIONS Handyscan 3D stand out as the most accurate portable 3D scanners on the market today. Because
More information3D Laser Scanning Technology. Rugged hardware and powerful software combined with streamlined survey workflow
3D Laser Scanning Technology Rugged hardware and powerful software combined with streamlined survey workflow Maptek specialises in the research, development and application of 3D laser scanning technology.
More informationTHE OPTICAL CMM 3D SCANNERS FOR INDUSTRIAL APPLICATIONS
METROLOGY SOLUTIONS THE OPTICAL CMM 3D SCANNERS FOR INDUSTRIAL APPLICATIONS PORTABLE 3D MEASUREMENT SOLUTIONS The arm-free handheld MetraSCAN 3D line-up of optical CMM 3D scanning systems and the C-Track
More informationTypes of 3D Scanners and 3D Scanning Technologies.
Types of 3D Scanners and 3D Scanning Technologies. There are many types of 3D scanners and 3D scanning technologies. Some are ideal for short range scanning while others are better suited for mid or long
More informationMechanical Measurement and Inspection Techniques
Unit 19: Mechanical Measurement and Inspection Techniques Unit code: QCF Level 3: Credit value: 10 Guided learning hours: 60 Aim and purpose J/600/0269 BTEC National This unit will give learners a broad
More information3D Laser Scanning For Digital Modeling & Documentation
3D Laser Scanning For Digital Modeling & Documentation Company Profile Direct Dimensions is dedicated to tackling the most difficult challenges with the most advanced 3D technologies available. Direct
More informationMany professionals quickly
Uses of Scanning in Asset Management Geoff Jacobs Many professionals quickly associate laser scanning with creating asbuilts for use by engineers or designers. However, scanning is used successfully in
More information3D Laser Scanning Software Solutions
3D Laser Scanning Software Solutions www.lfm-software.com LFM Software Overview Realise the true value of your laser scan data. Outside the EPC environment, Owner Operators are now also recognising the
More informationDesign & Drafting Services
Design & Drafting Services 1. Mechanical CAD Services 1. Mechanical CAD Services Mechanical Design Services: Custom machine design Packaging machine design Mechanism design Machine tool design Material
More informationLaser Scanning Surveying and Ground Penetrating Radar The Full Three Dimensional Picture Above and Below Ground
Laser Scanning Surveying and Ground Penetrating Radar The Full Three Dimensional Picture Above and Below Ground CIVILEX 2009 Mark Hudson, Director, Coastway, FInstCES MRICS MIS BTS Jeff Hott, Laser Scanning
More informationProduct and Service Catalog 2009 Direct Dimensions, Inc.
Product and Service Catalog 2009 LASER SCANNERS... 4 SURPHASER LASER SCANNER... 4 DIMENSIONAL IMAGING DI3D... 4 VIALUX Z-SNAPPER 3D CAMERA... 4 KONICA MINOLTA RANGE7 3D DIGITIZER... 4 KONICA MINOLTA VIVID
More informationPipeline External Corrosion Analysis Using a 3D Laser Scanner
Pipeline Technology Conference 2013 Pipeline External Corrosion Analysis Using a 3D Laser Scanner Pierre-Hugues ALLARD, Charles MONY Creaform, www.creaform3d.com 5825 rue St-Georges, Lévis (QC), Canada,
More informationArm2. Arm Arm22. Articulated Arm. machines MEASURING. tridimensional measuring FRATELLI ROTONDI
Arm Arm22 2 Arm2 tridimensional measuring Articulated Arm MEASURING machines FRATELLI ROTONDI Arm2 MEASURING Arm2Arm2 SOFTWARE Software in WINDOWS environment: sura tridimesio - elements with definite
More informationOptical Digitizing by ATOS for Press Parts and Tools
Optical Digitizing by ATOS for Press Parts and Tools Konstantin Galanulis, Carsten Reich, Jan Thesing, Detlef Winter GOM Gesellschaft für Optische Messtechnik mbh, Mittelweg 7, 38106 Braunschweig, Germany
More informationTHE TRULY PORTABLE METROLOGY-GRADE 3D SCANNERS
METROLOGY SOLUTIONS THE TRULY PORTABLE METROLOGY-GRADE 3D SCANNERS What will you print tomorrow? The HandySCAN 3DTM handheld scanners of new generation have been optimized to meet the needs of product
More informationF A R O L a s e r S c a n n e r F o c u s 3 D
F A R O L a s e r S c a n n e r F o c u s 3 D 02 The World s Most Advanced 3D Laser Scanner 04 A Revolution in 3D Laser Scanning 06 A Multitude of Features 08 Real-World Applications 22 The New SCENE 24
More informationProper Implementation of Industrial CT Scanning to Reduce Inspection Costs & Get to Production Faster. Jesse Garant, JG&A Metrology Center
Proper Implementation of Industrial CT Scanning to Reduce Inspection Costs & Get to Production Faster Jesse Garant, JG&A Metrology Center Traditional Metrology and Inspection Tactile Devices (Touch Probe)
More informationLaser Scanning. Efficient solutions for complex challenges
Laser Scanning Efficient solutions for complex challenges 3D scatter plot DMT laser scanning the faster and more cost-effective way to reach your goals In many areas of industrial surveying laser scanning
More informationTHE TRULY PORTABLE METROLOGY-GRADE 3D SCANNERS
METROLOGY SOLUTIONS THE TRULY PORTABLE METROLOGY-GRADE 3D SCANNERS The HandySCAN 3D TM handheld scanners of new generation have been optimized to meet the needs of product development and engineering professionals
More informationEngineering Transfer. Engineering Technology, Manufacturing Technology, and Industrial Technology Transfer
86 Instructional Programs Students will develop the skills and knowledge necessary to select as well as develop engineering careers; produce engineering drawings that conform to industry standards; create
More informationENGINEERING METROLOGY
ENGINEERING METROLOGY ACADEMIC YEAR 92-93, SEMESTER ONE COORDINATE MEASURING MACHINES OPTICAL MEASUREMENT SYSTEMS; DEPARTMENT OF MECHANICAL ENGINEERING ISFAHAN UNIVERSITY OF TECHNOLOGY Coordinate Measuring
More informationMCADD COURSE STRUCTURE
MCADD COURSE STRUCTURE S.No Course code Software used Duration Master Diploma in Product Design and Analysis 1 MCADD MD40 CATIA V5 +NX CAD +NX CAM +Ansys +PPM Concepts +MSP 2010 (mechanical)+gd & T 360
More informationELEMENTS OF SOFTWARE INTEGRATION OF PRODUCTION SYSTEMS IN INDUSTRIAL PRODUCT CONTROL AND DIDACTICS 1. INTRODUCTION
Journal of Machine Engineering, Vol. 13, No. 4, 2013 part inspection, coordinate instruments, optical scanner Halina NIECIĄG 1 Piotr DUDEK 1 ELEMENTS OF SOFTWARE INTEGRATION OF PRODUCTION SYSTEMS IN INDUSTRIAL
More informationLarsLap model C for cutting, milling grinding and lapping seats and flanges on globe, safety and control valves
LarsLap model C for cutting, milling grinding and lapping seats and flanges on globe, safety and control valves As a rule, control and reduction valves of the globe type have an integrated plug that narrowly
More informationCAD / CAM Dr. P. V. Madhusuthan Rao Department of Mechanical Engineering Indian Institute of Technology, Delhi Lecture No. # 12 Reverse Engineering
CAD / CAM Dr. P. V. Madhusuthan Rao Department of Mechanical Engineering Indian Institute of Technology, Delhi Lecture No. # 12 Reverse Engineering So what we will do in today s lecture is basically take
More informationManufacturing process
Manufacturing process What is Manufacturing Process? A sequence of operations, often done on a machine or at a given area. Examples: welding, casting, cutting, assembling, etc. During a manufacturing process,
More informationCoordinate Measuring Machines CAT-1000. Bulletin No. 2076. Computer Assisted Technology CAT-1000 Model Based Definition
Coordinate Measuring Machines CAT-1000 Bulletin No. 2076 Computer Assisted Technology CAT-1000 Model Based Definition CMM System Manager From the Part Manager the CMM System Manager allows rack positions
More informationCOMPUTATIONAL ACCURACY ANALYSIS OF A COORDINATE MEASURING MACHINE UNDER STATIC LOAD
COMPUTATIONAL ACCURACY ANALYSIS OF A COORDINATE MEASURING MACHINE UNDER STATIC LOAD Andre R. Sousa 1 ; Daniela A. Bento 2 CEFET/SC Federal Center of Technological Education Santa Catarina Av. Mauro Ramos,
More information3D REVERSE ENGINEERING SOFTWARE
3D REVERSE ENGINEERING SOFTWARE PRODUCT WORKFLOWS GEOMAGIC STUDIO WORKFLOW SCAN AND PROBE Collect 3D point cloud and probe data from physical objects to form the basis of the new 3D model. PROCESS Use
More informationProductivity+ CNC plug-in
Productivity+ CNC plug-in Productivity+ CNC plug-in The Productivity+ CNC plug-in is a unique software application for CNC machine tools, offering unparalleled opportunities for workpiece measurement,
More informationApplication Example: Reverse Engineering
Application Example: Reverse Engineering Use of optical measuring technology in the ceramics industry Measuring system: ATOS Keywords: Reverse Engineering, Tool and Moldmaking, Quality Assurance, Ceramic
More informationVERSATILE AND EASY-TO-USE 3D LASER SCANNERS > >
VERSATILE AND EASY-TO-USE 3D LASER SCANNERS > > A WORLD OF APPLICATIONS Z Corporation, producers of the industry s fastest, easiest-to-use and most versatile 3D scanners, makes 3D scanning ideal for a
More informationInspection of diffusely reflecting surfaces
surfacecontrol Inspection of diffusely reflecting surfaces 2 Surface control with fringe projection 3 Industrial surface inspection Requirements High quality finished surfaces are a challenge for many
More informationSolidWorks TolAnalyst Frequently Asked Questions
SolidWorks TolAnalyst Frequently Asked Questions Q: What is tolerance stack-up analysis? A: A Tolerance Stack-Up Analysis is an analysis used by designers and engineers to determine if an assembly of parts
More informationVERSATILE AND EASY-TO-USE 3D LASER SCANNERS > >
VERSATILE AND EASY-TO-USE 3D LASER SCANNERS > > A WORLD OF APPLICATIONS 3D Systems, producers of the industry s fastest, easiest-to-use and most versatile 3D scanners, makes 3D scanning ideal for a wide
More informationInnovative capture and modeling of existing building conditions using 3D laser scanning. Entry B Submission
Innovative capture and modeling of existing building conditions using 3D laser scanning Entry B Submission Executive Summary As a large owner organization, understanding and developing new technologies
More informationSection. Tolerances. Aluminum Extrusion Manual. 4th Edition
Section 8 Tolerances Aluminum Extrusion Manual 4th Edition Section 8 How straight is straight enough? How flat is flat enough? How uniform must a wall thickness be in order to be acceptable? These are
More informationComputer Integrated Manufacturing CIM A T I L I M U N I V E R S I T Y
MFGE 404 Computer Integrated Manufacturing CIM A T I L I M U N I V E R S I T Y Manufacturing Engineering Department Lecture 1 - Introduction Dr. Saleh AMAITIK Fall 2005/2006 Production Systems Production
More informationWorld leading hardware-independent inspection software. www.powerinspect.com
World leading hardware-independent inspection software www.powerinspect.com Complete CADCAM Solutions 150 subsidiaries and partners in 80 countries More than 800 employees The world s largest CAM development
More informationREV G D6-51991 Boeing Partner Network REFERENCE ONLY Copy 1 of 15
REV G D6-51991 Boeing Partner Network REFERENCE ONLY Copy 1 of 15 TABLE OF CONTENTS Section Page Table of Contents 2 Abstract 3 Maintenance 3 References 3 Purpose 4 Scope 4 Definitions 4 1.0 Digital Product
More information3D Laser Scanning for Manufacturing Facilities Developing the Business Case. By Bill Campbell Founder, Digital Dimensions 360, LLC
3D Laser Scanning for Manufacturing Facilities Developing the Business Case By Bill Campbell Founder, Digital Dimensions 360, LLC Table of Contents Introduction The Importance of Accuracy Workflow and
More information3D Laser Scanning 1 WHAT IS 3D LASER SCANNING?
3D Laser Scanning 1 WHAT IS 3D LASER SCANNING? In essence, laser scanning is to 3D objects what photocopying is to 2D objects. Laser Design's Surveyor family of 3D Laser Scanning Systems makes use of a
More informationTHE FASTEST AND EASIEST 3D SCANNING EXPERIENCE
METROLOGY SOLUTIONS THE FASTEST AND EASIEST 3D SCANNING EXPERIENCE The Go!SCAN 3D TM product line offers our easiest portable 3D scanning experience, providing fast and reliable measurements. With these
More informationBIM Department. BIM Modeling Using Faro Focus3D Laser Scanner
BIM Modeling Using Faro Focus3D Laser Scanner Contents What is Laser Scanning? Advantages of Laser Scanning BIM Workflow Process Scanner Unit Set-up and Scanning Processing Scan Files BIM Software Creating
More information3D SCANNING SOLUTION FOR PIPELINE INTEGRIT Y ASSESSMENT!
NDT SOLUTIONS 3D SCANNING SOLUTION FOR PIPELINE INTEGRIT Y ASSESSMENT! CODE-COMPLIANT Pipeline operators and NDT service companies must deal with increasing pressure from regulation authorities and environmentalists
More informationRenishaw 2008. apply innovation TM. Calibrating 5-axis machines to improve part accuracy. 5Align
Calibrating 5-axis machines to improve part accuracy 5Align Productive Process Pyramid TM Understanding and tracking machine behaviour Process verification Thermal compensation In-cycle process control
More informationLOOP Technology Limited. vision. inmotion IMPROVE YOUR PRODUCT QUALITY GAIN A DISTINCT COMPETITIVE ADVANTAGE. www.looptechnology.
LOOP Technology Limited vision inmotion IMPROVE YOUR PRODUCT QUALITY GAIN A DISTINCT COMPETITIVE ADVANTAGE www.looptechnology.com Motion Control is an established part of the production process in a diverse
More informationProduct Design (Part 4)
Product Design (Part 4) Engineering Drawing Chapter 16 Drawing Standards Line conventions and lettering- ANSI/ASME Y14.2M-1992 Multiview and sectional view drawings- ANSI/ASME Y14.3M-1994 Pictorial drawing-ansi/asme
More informationGo!SCAN 3D: FAST AND EASY 3D SCANNING
Go!SCAN 3D: FAST AND EASY 3D SCANNING PORTABLE 3D MEASUREMENT SOLUTIONS The statue is part of the heritage of the Fabrique Saint-Augustin (Saint-Augustin-de-Desmaures) Creaform presents Go!SCAN 3D, a simple,
More informationA CAD MODELLING SYSTEM AUTOMATION FOR REVERSE ENGINEERING APPLICATIONS
A CAD MODELLING SYSTEM AUTOMATION FOR REVERSE ENGINEERING APPLICATIONS Jafar Jamshidi, Antony R. Mileham and Geraint W. Owen The University of Bath, UK J.Jamshidi@bath.ac.uk, A.R.Mileham@bath.ac.uk, G.W.Owen@bath.ac.uk
More informationTrimble Realworks Software
TECHNICAL NOTES Trimble Realworks Software A Powerful 3D Laser Scanning Office Software Suite DESIGNED FOR TODAY S MULTIFACETED SCANNING PROFESSIONAL, TRIMBLE REALWORKS IS A POWERFUL OFFICE SOFTWARE THAT
More informationPrecision Manufacturing Regional Alliance Project (PMRAP) Accelerated Weekend Program. Springfield Technical Community College.
Precision Manufacturing Regional Alliance Project (PMRAP) Accelerated Weekend Program At Springfield Technical Community College Summary Report Precision Manufacturing Regional Alliance Project (PMRAP)
More informationTHE CONTROL OF A ROBOT END-EFFECTOR USING PHOTOGRAMMETRY
THE CONTROL OF A ROBOT END-EFFECTOR USING PHOTOGRAMMETRY Dr. T. Clarke & Dr. X. Wang Optical Metrology Centre, City University, Northampton Square, London, EC1V 0HB, UK t.a.clarke@city.ac.uk, x.wang@city.ac.uk
More informationPump Skid Fabrication for Magnetic Coupling. Rick Soltis Chief Mechanic City of Bedford
Pump Skid Fabrication for Magnetic Coupling Rick Soltis Chief Mechanic City of Bedford Contents Magnetic Couplings What They Are, How They Work, Where They re Used Fabrication and Manufacturing of Pump
More informationPoint cloud processing - scanning, analysing and validating
Point cloud processing - scanning, analysing and validating NPL Freeform Centre of Excellence launch -1 st October Andy Robinson Contents Heat shield tile measurements Laser scanner performance analysis
More informationWho are we. Engineering & Quality. Elements & Moulds. Verification. Approx. 800 employees. Approx.330 employees. Approx. 26 employees.
Who are we Engineering & Quality Elements & Moulds Verification Approx. 800 employees Approx.330 employees Approx. 26 employees Management Zeiss Manual Calibration Specialists 2012 The LEGO Group Page
More information3D SCANNING: A NEW APPROACH TOWARDS MODEL DEVELOPMENT IN ADVANCED MANUFACTURING SYSTEM
3D SCANNING: A NEW APPROACH TOWARDS MODEL DEVELOPMENT IN ADVANCED MANUFACTURING SYSTEM Dr. Trikal Shivshankar 1, Patil Chinmay 2, Patokar Pradeep 3 Professor, Mechanical Engineering Department, SSGM Engineering
More informationConstruction layout and scanning solutions for the MEP contractor
Middle East Construction layout and scanning solutions for the MEP contractor Trimble Field Solutions Trimble Robotic Total Stations and 3D scanners allow you to both layout your MEP services as designed,
More informationCAD/CAM DESIGN TOOLS. Software supplied with all new and upgraded Boxford Lathes, Mills and Routers
CAD/CAM DESIGN TOOLS Software supplied with all new and upgraded Boxford Lathes, Mills and Routers The Boxford CAD/CAM Design Tools software is a unique suite of integrated CAD and CAM tools designed specifically
More informationCustomer: Oestre Gasvaerks Theatre. Project: Inside scan building. Purpose: Mapping of stage and audience area.. Delivery: 3D CAD model.
PROJECT REFERENCE LIST : This list provides a small selection of the many different laser scanning projects and customers that LODAHL has been involved with since the introduction of laser scanning in
More informationNRC Publications Archive Archives des publications du CNRC
NRC Publications Archive Archives des publications du CNRC Digital 3D Imaging and Modeling: A Metrological Approach Beraldin, Jean-Angelo Publisher s version / Version de l'éditeur: Time Compression Technologies
More informationBoost Your Productivity
Boost Your Productivity 2 Askaynak Automation Askaynak Automation 1 2 3 Efficient Competitive Safe! Askaynak Automation is a fully-owned subsidiary of Eczacıbaşı-Lincoln Electric Askaynak, the leading
More informationtechnical notes trimble realworks software
technical notes trimble realworks software A POWERFUL 3D LASER SCANNING OFFICE SOFTWARE SUITE Designed for today s multifaceted scanning professional, Trimble RealWorks is a powerful office software that
More informationDesign/Build and Equipment Integration
Design/Build and Equipment Integration PROFESSIONAL ENGINEERING AND DESIGN It starts with your challenge. And ends with a custom-tailored REL solution. REL, Inc. provides professional engineering services
More informationMachine Tool Inspection & Analyzer solutions
Machine Tool Inspection & Analyzer solutions Introduction IBS Precision Engineering machine tool inspection series offers a range of products to provide peace of mind and control to machine operators by
More informationManufacturing Process and Cost Estimation through Process Detection by Applying Image Processing Technique
Manufacturing Process and Cost Estimation through Process Detection by Applying Image Processing Technique Chalakorn Chitsaart, Suchada Rianmora, Noppawat Vongpiyasatit Abstract In order to reduce the
More informationCAD Model Validation in the Product Life Cycle Management
CAD Model Validation in the Product Life Cycle Management CAPVIDIA CEO Tomasz Luniewski BOEING is a trademark of Boeing Management Company. GPDIS_Template_2009.ppt 9/23/2009 1 Company Introduction Founded
More informationMaster Diploma in Product Design and Analysis Course Code Software Used Duration MCADD MD100 AutoCAD 2D + Creo + SolidWorks + ANSYS + PPM Concepts +
Master Diploma in Product Design and Analysis MCADD MD100 AutoCAD 2D + Creo + SolidWorks + ANSYS + PPM Concepts + MSP + GD&T 384 MCADD MD101 AutoCAD 2D + Creo + SolidWorks + ANSYS + PPM Concepts + Primavera
More informationME 521 Computer Aided Design. 1. Introduction to CAD
Computer Aided Design Yrd.Doç. e mail: azsenalp@gyte.edu.tr Makine Mühendisliği Bölümü Gebze Yüksek Teknoloji Enstitüsü Basic Definitions CAD: Computer Aided Design is the use of computer technology for
More informationManufacturing Technology Associate in Applied Science Field of Study Code: MANUF.AAS
Manufacturing Technology Associate in Applied Science Field of Study Code: MANUF.AAS Catalog Description: The Manufacturing Technology program provides training in a wide variety of skill areas of product
More informationMEASURING MACHINES. Pratt & Whitney METROLOGY LABORATORY. Measurement Systems, Inc.
METROLOGY LABORATORY Pratt & Whitney Measurement s, Inc. METROLOGY LABORATORY The Standard of Accuracy Pratt & Whitney Metrology Laboratory Machines are the standard of accuracy to which all other gages
More informationApplication Report. Propeller Blade Inspection Station
34935 SE Douglas Street, Suite, Snoqualmie, WA 9874 Ph: 425-396-5577 Fax: 425-396-586 Application Report Propeller Blade Inspection Station Prepared By Kyle Johnston, Ph. D. Metron Systems Inc.5.5 3 2.5
More informationVALLIAMMAI ENGINEERING COLLEGE SRM NAGAR KATTANKULATHUR DEPARTMENT OF MECHANICAL ENGINEERING ME2304 ENGINEERING METROLOGY AND MEASUREMENT
VALLIAMMAI ENGINEERING COLLEGE SRM NAGAR KATTANKULATHUR DEPARTMENT OF MECHANICAL ENGINEERING ME2304 ENGINEERING METROLOGY AND MEASUREMENT QUESTION BANK UNIT I CONCEPT OF MEASUREMENT 1. What are the uses
More informationCALIBRATION OF A ROBUST 2 DOF PATH MONITORING TOOL FOR INDUSTRIAL ROBOTS AND MACHINE TOOLS BASED ON PARALLEL KINEMATICS
CALIBRATION OF A ROBUST 2 DOF PATH MONITORING TOOL FOR INDUSTRIAL ROBOTS AND MACHINE TOOLS BASED ON PARALLEL KINEMATICS E. Batzies 1, M. Kreutzer 1, D. Leucht 2, V. Welker 2, O. Zirn 1 1 Mechatronics Research
More informationTruLaser Tube: Optimal tube. and. profile cutting. Machine Tools / Power Tools Laser Technology / Electronics Medical Technology
TruLaser Tube: Optimal tube and profile cutting Machine Tools / Power Tools Laser Technology / Electronics Medical Technology Giving you the edge in laser tube processing. The TRUMPF Group ranks among
More informationAftermarket Field Service Capabilities
3 International View ABZ Business Park Aberdeen AB21 0BJ aberdeen.sc@spxflow.com Aftermarket Field Service Capabilities For General Services, Planned & Emergency Offshore Field Service Mobilisation Call:
More information0 INTRODUCTION. Fig. 1. Atos II optical scanner schematics
Strojniški vestnik - Journal of Mechanical Engineering 57(011)11, 86-833 Paper received: 07.07.010 DOI:10.5545/sv-jme.010.15 Paper accepted: 03.08.011 Possibilities of Using Three-Dimensional Optical Scanning
More informationRMI-Q multiple radio probe interface
RMI-Q multiple radio probe interface Globally recognised 2.4 GHz waveband Maximise system numbers Superior communication capability RMI-Q for optimised process control capability Tackle process variation
More informationCMMs and PROFICIENCY TESTING
CMMs and PROFICIENCY TESTING Speaker/Author: Dr. Henrik S. Nielsen HN Metrology Consulting, Inc. HN Proficiency Testing, Inc. Indianapolis, Indiana, USA hsnielsen@hn-metrology.com Phone: (317) 849 9577;
More informationWorking Drawing and Assemblies. Chapter 10
Working Drawing and Assemblies Chapter 10 Objectives 1.Define working drawings. 2. Describe how working drawings are used in industry. 3. List the major components of a complete set of working drawings.
More informationMaking Better Medical Devices with Multisensor Metrology
Making Better Medical Devices with Multisensor Metrology by Nate J. Rose, Chief Applications Engineer, Optical Gaging Products (OGP) Multisensor metrology is becoming a preferred quality control technology
More informationNew Zealand BIM Handbook Appendix D - BIM Uses definitions July 2014. A guide to enabling BIM on building projects
New Zealand BIM Handbook Appendix D - BIM Uses definitions July 2014 A guide to enabling BIM on building projects Appendix D BIM USES DEFINITIONS CONTENTS BIM Uses 2 Existing Condition Modelling... 4 Cost
More informationHexagon Ventures offers the next generation of smart solutions for business verticals.
1 2 Hexagon Geosystems offers products and services from leading brands such as Leica Geosystems. solutions are trusted worldwide to capture, analyse, and present spatial information. Hexagon Geospatial
More information\ srl High Technology Gear Reducers and Cardan Shafts CERTIFIED QUALITY SYSTEM: UNI ISO EN 9001:2008 ICIM 2779/2; IQNET N. IT-28236 UNIVERSAL SHAFT
UNIVERSAL SHAFT CAT CERTIFICATION CARDAN SHAFTS - COUPLINGS Alongside with the production of special gearboxes, our company has developed the production of Universal shafts, with the same high quality
More informationVertex BD. Leading Software Solution for Cold Formed Steel Construction
Vertex BD Leading Software Solution for Cold Formed Steel Construction Architectural Design Framing Engineering Detailing Production One Tool Does It All Leading Software for CFS Construction Vertex BD
More informationBig Data More Is Not Always Better For Your Big Data Strategy
Big Data More Is Not Always Better For Your Big Data Strategy Abstract Everyone is talking about Big Data. Enterprises across the globe are spending significant dollars on it and endeavor with their strategy.
More informationPreciTrack3D GmbH. PRECI 3D TRACK PRECI 3D GUN PRECI 3D SCAN PRECI 3D ROBOGUN PRECI 3D CONFOCAL PRECI 3D REF Tube Inspection & Measurements PRODUCTS
HIGHLIGHTS 3D Real Time Tracking Quality Control & Inspection Reverse Engineering ID 2D 3D Scanning PRODUCTS PRECI 3D TRACK PRECI 3D SCAN PRECI 3D CONFOCAL PRECI 3D REF Tube Inspection & Measurements PRECI
More informationPORTIO. Intelligent Portion Cutter. High speed cutting: Fixed weight, fixed thickness. High precision, minimal give-away.
Intelligent Portion Cutter PORTIO High speed cutting: Fixed weight, fixed thickness High precision, minimal give-away Flexible software Easy to clean Labor saving options Features PORTIO 1 Principle Automatic
More informationPatternmaking CAD CAM models Jigs and fixtures Press tools
Lofting Services North West CNC precision machining Patternmaking CAD CAM models Jigs and fixtures Press tools Lofting Services North West Human Head Stage 1 Machining used to simulate fighter pilot retinal
More informationThe UniWest 4D Rapid Prototype Product Development System. Use mouse or arrow keys to scroll through presentation.
The UniWest 4D Rapid Prototype Product Development System Use mouse or arrow keys to scroll through presentation. Overview! UniWest s unique 4D process for rapid prototype development ensures fast solutions
More informationOptimization Services
Measurements Stork Optimization Services can perform various sorts of measurements on your installation; a summary of the commonest measurements is given below: Vibration measurements: Stork Optimization
More informationMoveInspect HF HR. 3D measurement of dynamic processes MEASURE THE ADVANTAGE. MoveInspect TECHNOLOGY
MoveInspect HF HR 3D measurement of dynamic processes MEASURE THE ADVANTAGE MoveInspect TECHNOLOGY MoveInspect HF HR 3D measurement of dynamic processes Areas of application In order to sustain its own
More information