pull! Clean plastic and metal surfaces with a soft damp cloth. Air dry. Do not use abrasive cleaners or solvents. Do not use bleach.

Transcription

1 removing infant car seat from stroller: pull release handle on the back of car seat lift car seat up by carry handle Press release buttons and pull up on car seat adaptor to remove fuzetmtravel system with prodigy infant car seat TRAVEL SYSTEM INSTRUCTION MANUAL Please read the following instructions and warnings carefully before use of product. Keep this instruction manual for future reference. Prodigy infant car seat User Guide included and attached to car seat. 870 pull pull pull Car seat control panel required AA batteries (included). No tools required. For Technical Support Call Consumer Relations reattaching the storage basket: snap basket onto frame snap snaps x radio and television interference: (FCC Statement) Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 5 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/tv technician for help. Caution: Changes or modifications not expressly approved by Summer Infant Inc. for compliance could void the user s authority to operate the equipment. x 4 snaps We LOVE our consumers Get to know us at: Summer Infant stands behind all of its products. If you are not completely satisfied or have any questions, please contact our Consumer Relations Team at or (For Europe call (0) or customerserviceuk@summerinfant.com) connect with us: care and maintenance: Clean minor stains on fabric with cold water and mild soap. Air dry. Clean plastic and metal surfaces with a soft damp cloth. Air dry. Do not use abrasive cleaners or solvents. Do not use bleach. Check seat pad harness and crotch straps weekly to ensure they are properly secured to frame. Additional accessories available online. For more information visit Summer Infant, Inc. 75 Park East Drive Woonsocket, RI 0895 USA Summer Infant Canada 055 Middlegate Road, Unit Mississauga, Ontario L4Y Y4 MADE IN CHINA. 0 Summer Infant, Inc. Colors and styles may vary. Please retain for future reference. 0/ WARNING: Keep small parts and packaging away from children. WARNING: Adult assembly required. Exercise care when unpacking and assembling product. Read and follow all warnings and instructions. Failure to do so could result in serious injury or death. NEVER leave child unattended. ALWAYS keep child in view while in the stroller. Avoid serious injury from falling or sliding out. ALWAYS use safety harness. Stroller maximum weight limit 50 lbs. (.7 kg). When making adjustments to the product ALWAYS ENSURE that all parts of a child s body are clear of any moving parts of the product. Care must be taken when folding and unfolding the product to prevent finger entrapment. DO NOT carry additional children, goods or accessories in or on this product except as recommended in this instruction manual. TO AVOID INJURY TO YOUR CHILD, DO NOT USE STORAGE BASKET AS A CHILD CARRIER. DO NOT hang items on handle bar or place them on the canopy, as they can tip stroller over and injure child. DO NOT OVERLOAD STORAGE BASKET. MAXIMUM 0 lbs. (4.5 kg). DO NOT overload the storage pocket and cup holder. MAXIMUM lbs. (0.9 kg). Excessive weight may cause the stroller to become unstable or tip over. Do not place hot liquids in the cup holder. Spills can burn your child. Do not carry or roll stroller on stairs or escalators with child in it. Do not use the strollers if any part is lost or damaged. Use ONLY with the Summer Infant Prodigy Infant Car Seat. Other car seats or carriers are not designed to fit the stroller frame and may result in serious injury or death. NEVER use them as they have not been safety tested. NEVER use Prodigy infant car seat in stroller without car seat adapter ALWAYS check to confirm the car seat adapter is securely locked to the stroller before use ALWAYS check to confirm the Prodigy car seat is securely locked into the car seat adapter before use See instructions for additional warnings. If you do not have a User Guide, visit or call Summer Infant Customer Service Dept. at to receive one.

2 folding stroller push small button in with thumb and pull back on both release levers at same time push down to fold push to release locking clip push push 4 lift handle up to unfold additional accessories: Additional accessories available at Rain shield 400 Bug net 40 Bassinet 640 Foot muff 40 Push down on handle to ensure that stroller is fully open and locked in position 0

3 stroller components: only use the prodigy infant car seat with this stroller stroller frame with basket rear wheels canopy stroller seat bumper bar prodigy car seat adapter WARNING: PREVENT SERIOUS INJURY OR DEATH FROM FALLS Infant car seat adapter must be securely locked to stroller before infant car seat is placed on stroller. NEVER use infant car seat in stroller without car seat adapter. CHECK to confirm that car seat adapter and car seat carrier are securely locked to the stroller. NEVER lift stroller by infant car seat handle. Read all warnings on front page of this instruction booklet and on product. attaching car seat adapter and infant car seat : stroller parts: front wheels rear wheels cup holder Prodigy car seat adaptor bumper bar storage basket canopy front wheels cup holder IMPORTANT Before assembly, inspect components for damaged hardware, loose joints or missing parts. Never use if any parts are missing or broken. press down on brake pedal to engage brake and remove stroller seat align car seat adapter with arrow facing forward. Push down to lock onto frame assembly instructions: Remove and dispose of packing material properly push on rear wheels, both sides push on front wheels install car seat rear facing, push down to lock into position Pull up on the car seat adapter to make sure it is securely locked. IMPORTANT Tug on each wheel to ensure they are securely attached Pull up on the car seat to make sure it is properly locked into place.

4 adjusting shoulder harness positions: 5 align seat with frame 6 push down adjust the harness height to the position that it closest to the childs shoulder height, use the slide adjusters for further adjustments NOTE: feed strap entirely through seat pad slots when adjusting harnes height lower position middle position upper position 4 slide adjustment releasing wheels: 7 attach canopy to frame and clip both sides to secure 8 install bumper bar and cupholder front wheels rear wheels pull pull pull pull NOTE: before use, ensure that all stroller connections are secure. finished 4 9

5 locking the wheels: stroller components: rear wheels - brake front wheels holds prodigy infant car seat (see page ) NOTE: locking the front wheels disables the swivel action canopy soft foam handle bumper bar bumper bar release button handle height adjust 5-point safety harness seat recline button stroller seat seat release button locking clip front wheel release button front wheel lock front wheels locking/unlocking the child safety harness: sweet peek window cup holder clip (both sides) cup holder folding buttons/release levers st open nd storage pocket close close storage basket pedicure-friendly rear brake rd rear wheel release button rear wheels 8 5

6 reclining the seat: reversing the seat: position press side buttons at the same time while lifting to release seat reverse seat align seat with frame and push down position lift position press both recline buttons at the same time and rotate to adjust seat angle. The seat will click into one of three positions. NOTE: before use, ensure that all stroller connections are secure. using the bumper bar: adjusting the handle height: press release button, pull up NOTE: the bumper bar can be and swing bumper bar to side removed by detaching both sides. press both buttons and adjust handle to desired height 6 7