Workplace Study and Ergonomics
|
|
- Calvin Jackson
- 7 years ago
- Views:
Transcription
1 Unit 33: Workplace Study and Ergonomics Unit code: D/601/1472 QCF level: 5 Credit value: 15 Aim This unit will develop learners ability to identify and carry out productivity measurement and improvement, ergonomic and plant layout design and work measurement and method study. Unit abstract This unit provides an opportunity for learners to apply several lean manufacturing techniques commonly used to identify and eliminate waste. Learners should have the opportunity to see skills and techniques at work in real engineering/manufacturing environments. Learning outcomes On successful completion of this unit a learner will: 1 Understand productivity measurement techniques and the effect of a range of improvement methods 2 Understand the features of work measurement and method study techniques 3 Be able to assess the ergonomic and layout planning features of workstation and manufacturing operations design 4 Be able to select and apply appropriate industrial engineering techniques to a given engineering/manufacturing situation. 157
2 Unit content 1 Understand productivity measurement techniques and the effect of a range of improvement methods Productivity measurement: methods of measuring physical factors labour, materials and equipment; single factor and integrated productivity measurement, critical analysis techniques including cost benefit analysis and force field analysis; (evaluation may include graphical representations, statistical representations, fitness for purpose considerations and recognition of short-term and long-term effects); quality, cost, delivery (QCD) metrics, value stream mapping (VSM), process mapping Productivity improvement: reduction in unit cost of manufacture by labour, product, materials, production level or machine automation, uses of new technology, efficient manual operation use of work-study, job design, layout and ergonomic design, total quality management methods, waste of resources eg energy, human, materials; reduction/elimination of the 8 wastes ; standardised operations and their relevant forms, takt time analysis and production smoothing, change-over analysis (SMED) 2 Understand the features of work measurement and method study techniques Work measurement: direct work measurement time study and activity sampling; indirect work measurement synthetic timing; predetermined motion time systems (PMTS) methods time measurement (MTM); computer-based programs; primary standard data; analytical estimating Method study: job selection; recording methods and procedures; method description; development of improved method; definition of new method and installation and maintenance Work measurement and study: chart format; simple comparisons; critical analysis; ranking techniques; technique application description; fitness for purpose 158 BH Edexcel BTEC Levels 4 and 5 Higher Nationals specification in Engineering
3 3 Bea able to assess the ergonomic and layout planning features of workstation and manufacturing operations design Ergonomic features: features of design including worker machine controls, environmental factors, anthropometrical data used in the design of workstations, special features for VDU operators, role of health and safety Layout planning features: features of design, including types of layout, operation sequence analysis, layout planning procedures and method, dedicated computer software, principles of motion economy Layout design: workstation design features such as characteristics of the operator, interaction between workspace and the operator eg posture, reach, desk/machine size, adjacent machinery, interaction between the environment and the operator Assess: develop criteria for good layout of workstation and manufacturing operations, consider flexibility, co-ordination, volume, visibility, accessibility, distance, handling, discomfort, safety, security, material flow, part identification, Poka yoke and Jidoka techniques 4 Be able to select and apply appropriate industrial engineering techniques to a given engineering/manufacturing situation Engineering/manufacturing situation: collect information and data on current company aims (eg current productivity, measurement, processes, process flow, scheduling, materials, equipment, labour, layout, ergonomic features of labour force and equipment operation); present evidence in a relevant form eg graphs, statistics, manuals, diagrams, recorded interviews, recorded observations, computer programs Engineering techniques: selection and application of techniques eg productivity measurement, productivity improvement, method study, work measurement, ergonomic design, layout planning; formulate a plan of action, appraise the feasibility of the techniques with reference to the engineering/manufacturing situation, make simple comparisons and use decision-making techniques eg consider fitness for purpose, long-term and short-term effects on the engineering/manufacturing situation; record and justify any changes to current engineering/manufacturing situation; present findings using relevant methods eg use of graphs, statistics, flow diagrams, layouts, computer programs, graphical techniques, video, file, written reports and discussion; use of appropriate lean manufacturing techniques eg use of QCD metrics, VSM, process mapping, takt time analysis, production smoothing, pull systems, SMED, visual management techniques 159
4 Learning outcomes and assessment criteria Learning outcomes On successful completion of this unit a learner will: LO1 Understand productivity measurement techniques and the effect of a range of improvement methods Assessment criteria for pass The learner can: 1.1 describe techniques of productivity measurement 1.2 analyse and evaluate the usefulness of the range of productivity measurement techniques 1.3 describe methods of productivity improvement 1.4 analyse and evaluate the effects of the range of productivity improvement methods LO2 Understand the features of work measurement and method study techniques 2.1 explain how work study comprises of work measurement and method study techniques 2.2 describe work measurement and method study techniques 2.3 analyse a range of work measurement and work study techniques used for a given situation LO3 Be able to assess the ergonomic and layout planning features of workstation and manufacturing operations design LO4 Be able to select and apply appropriate industrial engineering techniques to a given engineering/ manufacturing situation 3.1 describe ergonomic and layout planning features of workstation and manufacturing operations design 3.2 assess these features to develop criteria for good layout design 4.1 gather and present appropriate information from a given engineering/manufacturing situation 4.2 select industrial engineering techniques appropriate to a given engineering/manufacturing situation 4.3 apply industrial engineering techniques to a given engineering/manufacturing situation. 160 BH Edexcel BTEC Levels 4 and 5 Higher Nationals specification in Engineering
5 Guidance Links This unit can be linked with a wide range of engineering/manufacturing specialist units including Unit 9: Manufacturing Planning and Scheduling Principles, Unit 10: Manufacturing Process, Unit 30: Quality Assurance and Management, Unit 20: Quality and Business Improvement and Unit 31: Value Management. Essential requirements Many of the techniques involved in industrial engineering use specialist software that may prove expensive. In such cases, centres will need to ensure that learners can view an industrial demonstration of such software at the least. Employer engagement and vocational contexts Industrial visits, work placements or employment could provide access to additional resource facilities and reinforce relevance. 161
Hidalgo Consultores. Training programs 2015. info@hidalgoconsultores.com.com www.hidalgoconsultores.com
Hidalgo Consultores Highly qualified personnel increases the value of the company, allowing to work toward continuous productivity improvement and, hence, enhance COMPETITIVINESS Training programs 2015
More informationtimes, lower costs, improved quality, and increased customer satisfaction. ABSTRACT
Simulation of Lean Assembly Line for High Volume Manufacturing Hank Czarnecki and Nicholas Loyd Center for Automation and Robotics University of Alabama in Huntsville Huntsville, Alabama 35899 (256) 520-5326;
More informationLEAN CERTIFICATION BODY OF KNOWLEDGE RUBRIC VERSION 3.0
MODULE 1 LEAN CERTIFICATION BODY OF KNOWLEDGE RUBRIC VERSION 3.0 1. Cultural Enablers 15% 20% 25% 1.1. Principles of Cultural Enablers 3% 4% 5% 1.1.1. Respect for the individual 1.1.2. Humility 1.2. Processes
More informationLean Silver Certification Blueprint
The Lean Certification Blueprint provides additional useful information beyond the Body of Knowledge. The Body of Knowledge specifies the competencies, topics, and subtopics required by different types
More informationMarketing Intelligence
Unit 17: Marketing Intelligence Unit code: K/601/0955 QCF level: 4 Credit value: 15 credits Aim The aim of this unit is to enable learners to understand the purchase decision-making process and how marketing
More informationPlanning, Organisation and Control of Resources in Construction and the Built Environment
Unit 7: Planning, Organisation and Control of Resources in Construction and the Built Environment NQF Level 3: Guided learning hours: 60 BTEC National Unit abstract A successful project requires careful
More informationAims & Objectives. Target Audience :Anyone who has to write a report or proposal
A3 Reports Aims & Objectives Target Audience :Anyone who has to write a report or proposal Purpose of Module :To confirm understanding and benefits of A3 report writing to how to create one. Aims & Objectives
More informationDepartment of Mechanical Engineering. Indian Institute of Technology Roorkee. Telephone : (91-1332) Off : 285602. Department of Mechanical Engineering
Course 12. Industrial Engineering (Video Course) Faculty Coordinator(s) : 1. Prof. Pradeep Kumar Email : kumarfme@iitr.ernet.in Telephone : (91-1332) Off : 285602 Res : 270211, 285130 2. Prof. H. S. Shan
More informationProcess Improvement: Integrating Lean Six Sigma Ergonomics
Process Improvement: Integrating Lean Six Sigma Ergonomics Anand Subramanian, PhD, CPE, CSSBB Email: anands@jfa inc.com Brandy Farris Ware, PhD, CPE, CSSBB Email: bw@jfa inc.com September 22, 2015 Agenda
More informationBody of Knowledge for Six Sigma Lean Sensei
Body of Knowledge for Six Sigma Lean Sensei What to Prepare For: The following is the Lean Six Sigma Certification Body of Knowledge that the exam will cover. We strongly encourage you to study and prepare
More informationGetting Started with Lean Process Management
Getting Started with Lean Process Management Hi-Tec Exchange Conference San Francisco July 25, 2011 Missions To team with Organizational Leaders, Managers, & Employees to focus on customers & improve competitiveness,
More informationBQF Lean Certification Process
BQF Lean Certification Process Overview The CI/Lean Certification process provides for four levels of BQF certification. These are: BQF CI/Lean Associate; BQF CI/Lean Practitioner; BQF CI/Lean Advanced
More informationLean Healthcare Online
Lean Healthcare Online Online Healthcare Workshops Can Lean Process Principles Be Applied To Healthcare? We sometimes hear We are not manufacturers, and we re not Toyota! That s quite right; Healthcare
More informationCommunications for Engineering Technicians
Unit 2: Communications for Engineering Technicians Unit code: QCF Level 3: Credit value: 10 Guided learning hours: 60 Aim and purpose M/600/0251 BTEC National This unit gives learners the opportunity to
More informationAppendix Lean Glossary Page 1
Appendix Lean Glossary Page 1 Andon Board A visual control device in a work area giving the current status on performance to expectations and alerting team members to emerging issues. Batch-and- Queue
More informationEdexcel BTEC Level 2 in Food Safety in Catering
Centre Guidance for Onscreen Tested Vocational Edexcel BTEC Level 2 in Food Safety in Catering Issue 1 January 2012 BTEC Level 2 Award in Food Safety in Catering (QCF) Safety in Catering Issue 1 CONTENTS
More informationLouisiana Tech University Lean Manufacturing Courses
Lean Course Objectives: Your Employees will be able to: Louisiana Tech University Lean Manufacturing Courses Understand the tools, terms, terminology, and most importantly the benefits of Lean Manufacturing.
More informationLean Manufacturing and Six Sigma
Lean Manufacturing and Six Sigma Research Questions What have we done in the past? What must we do in the future? How do we know these are the correct actions? 1 Lean Definitions Key concepts of lean:
More informationLean Specialist Certification Program
Lean Specialist Certification Program ADVANCED INNOVATION GROUP PRO EXCELLENCE Lean Specialist Certification Program Certification from AIGPE has upheld the highest standards in the field of quality excellence
More informationinfo@regionalbusinesspartners.co.nz
Appendix 1: Qualifying Service Subjects Services covering the following subjects may qualify for the Voucher Scheme. SERVICES THAT ARE NOT ELIGIBLE INCLUDE Consultancy Services Staff and Industry Training.
More informationManaging the Lean Transformation
Managing the Lean Transformation Description: This four-day course will introduce operations managers to the system of philosophies and methods that are necessary for achieving lean operations through
More informationImplementing Automation after Making Lean Improvements
Implementing Automation after Making Lean Improvements Frank C. Garcia, P.E., Director Business Solutions & Engineering Services Tom Lawton, President Advent Design Corporation Bristol, PA, USA December
More informationCourse Outline UCLA Extension Department of Engineering, Information Systems & Technical Management
Course Outline UCLA Extension Department of Engineering, Information Systems & Technical Management Course Number & Title: X 428.68 Lean Operations Course Instructor: Saeed Madjidi, BSIE, MBA Phone: (C)
More informationManufacturing. Material Handling. Facilities Design and FIFTH EDITION. Matthew P. Stephens. Fred E. Meyers. Purdue University Press
Manufacturing Facilities Design and Material Handling FIFTH EDITION Matthew P. Stephens Fred E. Meyers Purdue University Press West Lafayette, Indiana Contents CHAPTER 1 INTRODUCTION TO MANUFACTURING FACILITIES
More informationQUEST The Systems Integration, Process Flow Design and Visualization Solution
Resource Modeling & Simulation DELMIA QUEST The Systems Integration, Process Flow Design and Visualization Solution DELMIA QUEST The Systems Integration, Process Flow Design and Visualization Solution
More informationIntroduction to Lean Healthcare
Introduction to Lean Healthcare Presented by: Steve Lockwood, CITEC Business Advisor / Lean June 2013 1 What is Lean Lean Enterprise is a systematic approach to identifying and eliminating waste (non-value-added
More informationSystems in Logistics
Unit 42: Quality Management Systems in Logistics Unit code: QCF Level 3: Credit value: 10 Guided learning hours: 60 Aim and purpose H/600/8606 BTEC National The unit provides learners with a comprehensive
More informationCanadian Technology Accreditation Criteria (CTAC) INDUSTRIAL ENGINEERING TECHNOLOGY - TECHNOLOGIST Technology Accreditation Canada (TAC)
Canadian Technology Accreditation Criteria (CTAC) INDUSTRIAL ENGINEERING TECHNOLOGY - TECHNOLOGIST Technology Accreditation Canada (TAC) Preamble These CTAC are applicable to programs having titles involving
More informationREDUCTION OF WORK IN PROCESS INVENTORY AND PRODUCTION LEAD TIME IN A BEARING INDUSTRY USING VALUE STREAM MAPPING TOOL
REDUCTION OF WORK IN PROCESS INVENTORY AND PRODUCTION LEAD TIME IN A BEARING INDUSTRY USING VALUE STREAM MAPPING TOOL Praveen Saraswat 1, Deepak Kumar 2 and Manoj Kumar Sain 3 1 Senior Lecturer, 2,3 Associate
More informationOAHHS LEAN WEBINAR DECEMBER 9, 2014. Purdue Research Foundation
OAHHS LEAN WEBINAR DECEMBER 9, 2014 1 Overview A3 Improve Key Components Control tools Deeper dive into a tool Questions? 2 DMAIC 3 4 Project Title and Area: Date: Organization: Authors: Pre- Define Measure
More informationLean Water Operations: Control the Cost and Pricing of Water While Improving Efficiency
Lean Water Operations: Control the Cost and Pricing of Water While Improving Efficiency June 13, 2011 1 Introduction In today s economy, finding ways to do more with less extends to virtually every business,
More informationJournal of Applied Science and Agriculture
AENSI Journals Journal of Applied Science and Agriculture ISSN 1816-9112 Journal home page: www.aensiweb.com/jasa Optimization Assembly Process base on Motion Time Study in Manufacturing Industry: Study
More informationAN INDUSTRIAL APPLICATION OF THE SMED METHODOLOGY AND OTHER LEAN PRODUCTION TOOLS
Integrity, Reliability and Failure of Mechanical Systems Paper Ref: 3927 AN INDUSTRIAL APPLICATION OF THE SMED METHODOLOGY AND OTHER LEAN PRODUCTION TOOLS Eric Costa 1(*), Rui Sousa 1, Sara Bragança 1,
More informationProcess Visualization of a Manufacturing Plant Based On Lean Concept
Proceedings of the 2014 International Conference on Industrial Engineering and Operations Management Bali, Indonesia, January 7 9, 2014 Process Visualization of a Manufacturing Plant Based On Lean Concept
More informationNaresh Paneru. Implementation of Lean Manufacturing Tools in Garment Manufacturing Process Focusing Sewing Section of Men s Shirt
Naresh Paneru Implementation of Lean Manufacturing Tools in Garment Manufacturing Process Focusing Sewing Section of Men s Shirt Implementation of Lean Manufacturing Tools in Garment Manufacturing Process
More informationLean Manufacturing Practitioner Training
Lean Manufacturing Practitioner Training Eliminate waste and maximize customer value kpmg.com/eastafrica/mc Lean Manufacturing Practitioner Training Lean Manufacturing is a way to eliminate waste, reduce
More informationLean Six Sigma and its application within the Criminal Justice Sector
Lean Six Sigma and its application within the Criminal Justice Sector Ian J Seath OR51 Conference, tember 2009 1 Agenda What is Lean Six Sigma? How can it add value? Applications in a CJ environment Example
More informationIntegrating Assembly Lines based on Lean Line Design Concept Ms. Surekha. S 1, Dr. R. V Praveena Gowda 2, Mr. Manoj Kulkarni 3
Integrating Assembly Lines based on Lean Line Design Concept Ms. Surekha. S 1, Dr. R. V Praveena Gowda 2, Mr. Manoj Kulkarni 3 Abstract In today s competitive business scenario manufacturing industries
More informationLean IT Foundation Syllabus
Lean IT Foundation Syllabus December 2015 - Version 1.06 1 Introduction Lean IT Foundation helps IT organizations to ensure that they provide their customers with the best possible services. Through understanding
More informationLean Supply Chain and Logistics Management
Lean Supply Chain and Logistics Management Paul Myerson Me Grauu Hill New York Chicago San Francisco Lisbon London Madrid Mexico City Milan New Delhi San Juan Seoul Singapore Sydney Toronto CONTENTS CHAPTER
More informationLean Six Sigma Black Belt Body of Knowledge
General Lean Six Sigma Defined UN Describe Nature and purpose of Lean Six Sigma Integration of Lean and Six Sigma UN Compare and contrast focus and approaches (Process Velocity and Quality) Y=f(X) Input
More informationImprovement & Implementation. Implementation & Leadership
INTRODUCTION The level descriptors are central to LCS, since they define what knowledge and implementation abilities an individual should possess. A programme or course aligned to a level should therefore
More informationThe Tools of Lean - Value Stream Mapping
ASQ Section 1302 Summer 2004 Series Mahoney State Park The Tools of Lean - Value Stream Mapping Stan Gidley Managing Director Institute of Business Excellence July 15, 2004 Outline Two Stories 1 English,
More informationLean Manufacturing. Professor Deborah Nightingale September 26, 2005
ean Manufacturing Professor eborah Nightingale September 26, 2005 Content eneral lean concepts in factory design Manufacturing Video Manufacturing System esign Framework Conclusions Source: Tom Shields,
More informationSupply Chain and Stock Management
Unit 35: Supply Chain and Stock Management Unit code: QCF Level 3: Credit value: 10 Guided learning hours: 60 Aim and purpose K/502/5493 BTEC National The aim of this unit is to examine the main principles,
More informationUnit 4: Marketing Principles
Unit 4: Marketing Principles Unit code: F/601/0556 QCF level: 4 Credit value: 15 credits Aim This unit aims to provide learners with understanding and skills relating to the fundamental concepts and principles
More informationUnderstanding Floristry Marketing Strategies
Unit 20: Understanding Floristry Marketing Strategies Unit code: QCF Level 3: Credit value: 10 Guided learning hours: 60 Aim and purpose D/602/0740 BTEC National This unit aims to introduce learners to
More informationAnalyze Mix for Opportunities. Create Full Current State Value Stream Map. Create Full Future State Value Stream Map
Method: Analyze Mix for Opportunities Gather Data Family Analysis Pareto Order- out Lead Time Create Full Current State Value Stream Map Demand Proportionate Boxes Product Variety Funnel Create Full Future
More informationLEAN Office & Business Processes Participant Handout Value Stream Mapping
LEAN Office & Business Processes Participant Handout Value Stream Mapping Manary Harcus Consulting Corp, 200 Value Stream Mapping Symbols xcel IN Process Box Inventory/Inbox Delay Time Customer or Supplier
More informationDOĞUŞ UNIVERSITY DIRECTIVES OF UNDERGRADUATE VOCATIONAL TRAINING FOR ASSOCIATE/UNDERGRADUATE DEGREE PROGRAMS (Accepted at the University Senate
DOĞUŞ UNIVERSITY DIRECTIVES OF UNDERGRADUATE VOCATIONAL TRAINING FOR ASSOCIATE/UNDERGRADUATE DEGREE PROGRAMS (Accepted at the University Senate meeting held on November 20th 2008 no 2008/20 and approved
More informationLeaning a Training Process for a Leading Irish Retail Bank
Lean Financial Services Value Stream Mapping Leaning a Training Process for a Leading Irish Retail Bank Lean Financial Services Value Stream Mapping Gerry Silke Lean Financial Services Consultant Leading
More informationLean Manufacturing Application on Welding Defects in Cryogenic Vessel
Lean Manufacturing Application on Welding Defects in Cryogenic Vessel Ajay K Solanki 1, Mit Pandya 2, Dhananjay Bisht 3, Arpit Bhatiya 4, Asst. Prof. Manoj Pal 5 1,2,3,4 UG Student Department of Mechanical
More informationManaging Physical Resources in a Business Environment
Unit 20: Managing Physical Resources in a Business Environment Unit code: QCF Level 3: Credit value: 10 Guided learning hours: 60 Aim and purpose A/502/5451 BTEC National The aim of this unit is to introduce
More informationEngineering Management Courses
Engineering Management Courses 124 Principles of Engineering Management This course is an introduction to engineering management principles and concepts and will address issues that are relevant to today's
More informationLean Six Sigma Lean 201 Introduction. TECH 50800 QUALITY and PRODUCTIVITY in INDUSTRY and TECHNOLOGY
TECH 50800 QUALITY and PRODUCTIVITY in INDUSTRY and TECHNOLOGY Before we begin: Turn on the sound on your computer. There is audio to accompany this presentation. Audio will accompany most of the online
More informationT.R. DOĞUŞ UNIVERSITY ASSOCIATE DEGREE/UNDERGRADUATE EDUCATION INTERNSHIP DIRECTIVE
T.R. DOĞUŞ UNIVERSITY ASSOCIATE DEGREE/UNDERGRADUATE EDUCATION INTERNSHIP DIRECTIVE (Accepted by the University Senate in the meeting dated 20.11.2008 and no. 2008/20, approved in the meeting of Board
More informationTRAINING SESSION SUMMARIES FOR SERVICE
TRAINING SESSION SUMMARIES FOR SERVICE Central to the lean philosophy is the mandate to educate everyone in an organization. Productivity s lean training has been called the best in the business, and for
More informationMSA71109 Vocational Graduate Certificate in Competitive Manufacturing
MSA71109 Vocational Graduate Certificate in Competitive Manufacturing Revision Number: 2 MSA71109 Vocational Graduate Certificate in Competitive Manufacturing Modification History This qualification has
More informationHealth, Safety and Welfare in Construction and the Built Environment
Unit 1: Health, Safety and Welfare in Construction and the Built Environment NQF Level 3: Guided learning hours: 60 BTEC National Unit abstract Health, safety and welfare are of paramount importance to
More informationCASE STUDY. NHS Board. Contact. Email. Title. Category. Background/ context. Problem. Aim. Action taken. NHS Lanarkshire.
NHS Board Contact Email NHS Lanarkshire Colin Blair colin.blair@lanarkshire.scot.nhs.uk Title Category Background/ context Problem Aim Action taken Improving Efficiency in Monklands Medical Records Department
More informationOperational Excellence using Lean Six Sigma Amit Dasgupta
Operational Excellence using Lean Six Sigma Amit Dasgupta Amit Dasgupta 1 Contents Introduction to Operational Excellence Deployment Practice Our Services Amit Dasgupta 2 Operational Excellence using Lean
More informationLead time Reduction Using Lean Manufacturing Principles For Delivery Valve Production
Global Journal of Finance and Management. ISSN 0975-6477 Volume 6, Number 1 (2014), pp. 35-40 Research India Publications http://www.ripublication.com Lead time Reduction Using Lean Manufacturing Principles
More informationHNC ELECTRICAL & ELECTRONIC ENGINEERING. Programme Specification
HNC ELECTRICAL & ELECTRONIC ENGINEERING Programme Specification Programme Specification Title of Programme: HNC ELECTRICAL & ELECTRONIC ENGINEERING This specification provides a concise summary of the
More informationProcess Improvement Program Project Process
Process Improvement Program Project Process 1 P a g e 12/3/2014 The Process Improvement Program is part of the City of Fort Lauderdale s FL 2 STAT Approach to Exponential Improvement. Its objective is
More informationUNIT BR10: PROJECT MANAGEMENT FOR ENGINEERING. Engineering
Unit BR10: Project for Engineering Unit code: T/503/7221 QCF level: 6 Credit value: 15 Aim The aim of this unit is to give learners an understanding of the techniques and skills required for effective
More informationProject Planning With IT
Unit 17: Project Planning With IT Unit code: QCF Level 3: Credit value: 10 Guided learning hours: 60 Aim and purpose Y/601/7321 BTEC National The aim of this unit is to ensure learners understand the processes
More informationChild Care Administration. Student Textbook. Content Child Development Services II. Contract Price $47.97. Grade 9, 10, 11, 12.
Kentucky Department of Education - Consumer Guide for Practical Living, Career Studies, and Career and Technical Education GOODHEART-WILLCOX PUBLISHER BASAL ISBN 9781590706008 Student Textbook 9781590706015
More informationLEAN MANUFACTURING TRAINING As Designed and Implemented by Minnesota Technology, Inc With Support from West Central Initiative
LEAN MANUFACTURING TRAINING As Designed and Implemented by Minnesota Technology, Inc With Support from West Central Initiative BACKGROUND For more than ten years Minnesota Technology, Inc. (MTI) and West
More informationVISUAL management techniques to support LEADERSHIP standard work
You won t GET LEAN... until you GET VISUAL! VISUAL management techniques to support LEADERSHIP standard work Promote and reinforce Leadership Standard Work as the way we do work Identify opportunities
More informationScope management can be defined as controlling what is and what is not a part of the project.
Scope Management Scope management can be defined as controlling what is and what is not a part of the project. According to the 2004 PMBOK scope management: Includes the processes required to ensure that
More informationSmall Lot Production. Chapter 5
Small Lot Production Chapter 5 1 Lot Size Basics Intuition leads many to believe we should manufacture products in large lots. - Save on setup time - Save on production costs Costs associated with Lots
More informationModel Assignment Issued July 2013 Level 4 Diploma in Business and Administration
Model Assignment Issued July 2013 Level 4 Diploma in Business and Administration Unit 1 Supporting Business Activities Please note: This OCR model assignment may be used to provide evidence for the unit
More informationLean, Six Sigma, and the Systems Approach: Management Initiatives for Process Improvement
PREPRINT Lean, Six Sigma, and the Systems Approach: Management Initiatives for Process Improvement Robert B. Pojasek Pojasek & Associates, Boston, USA This paper will be published as a featured column
More informationList of Courses for the Masters of Engineering Management Programme. (i)compulsory Courses
MASTER OF ENGINEERING MANAGEMENT (MEM) PROGRAMME List of Courses for the Masters of Engineering Management Programme (i)compulsory Courses EM 501 Organizational Systems 3 EM 502 Accounting and Financial
More informationLearners will develop skills in planning and managing information to produce an interactive website.
Unit IT9: Website Design Level: 1 Unit type: IT Guided learning: 40 hours Unit in brief Learners will develop skills in planning and managing information to produce an interactive website. Unit introduction
More informationBSH Production System
BSH Production System Festo Didactic 2. März 29 1. Kolloquium Nachhaltige Kapazitätssteigerungen in manuellen Montagesystemen festo didactic_exh_932 Das Ziel war 27... 2. Ebene der Leistungs - Steigerung
More informationA Guide to Web Development Using Adobe Dreamweaver CS3 Textbook
Kentucky Department of Education - Consumer Guide for Practical Living, Career Studies, and Career and Technical Education A Guide to Web Development Using Adobe Dreamweaver CS3 Textbook EMC Publishing,
More informationVideo, film, and animation are all moving images that are recorded onto videotape,
See also Data Display (Part 3) Document Design (Part 3) Instructions (Part 2) Specifications (Part 2) Visual Communication (Part 3) Video and Animation Video, film, and animation are all moving images
More informationAgilysys rguest Analyze Solution
Agilysys rguest Analyze Solution Improve Performance and Customer Service TABLE OF CONTENTS Introduction...3 What Will Be The Role 0f Analytics for Hospitality Businesses?...4 What s Involved in an Analytics
More informationSpecification. Issue 5. First teaching September 2010
Pearson BTEC Entry Level Award in Business Administration (Entry 3) (QCF) Pearson BTEC Level 1 Award/Certificate/ Diploma in Business Administration (QCF) Specification Issue 5 First teaching September
More informationLevel 1/2/3 Award in Business Finance (8990)
Level 1/2/3 Award in Business Finance (8990) Qualification handbook 500/4376/6 Level 1 500/4377/8 Level 2 500/4306/7 Level 3 www.cityandguilds.com May 2009 Version 2.0 About City & Guilds City & Guilds
More informationIMPACT OF PROCESS VARIABILITY ON LEAN MANUFACTURING SYSTEMS
IMPACT OF PROCESS VARIABILITY ON LEAN MANUFACTURING SYSTEMS Mel Adams and Bernard J. Schroer Center for Automation & Robotics University of Alabama in Huntsville Huntsville, AL 35899 adamsm@email.uah.edu
More informationRecognition of Prior Learning (RPL) BSB40515 Certificate IV in Business Administration
Recognition of Prior Learning (RPL) BSB40515 Certificate IV in Business Administration What is RPL? RPL recognises that you may already have the skills and knowledge needed to meet national competency
More informationCopyright 2010-2011 PEOPLECERT Int. Ltd and IASSC
PEOPLECERT - Personnel Certification Body 3 Korai st., 105 64 Athens, Greece, Tel.: +30 210 372 9100, Fax: +30 210 372 9101, e-mail: info@peoplecert.org, www.peoplecert.org Copyright 2010-2011 PEOPLECERT
More informationUnit code: D/601/1102 QCF level: 5 Credit value: 15 credits
Unit 30: Internet Marketing Unit code: D/601/1102 QCF level: 5 Credit value: 15 credits Aim This unit provides learners with an understanding of internet marketing so they can develop the skills to use
More informationMeasuring, Estimating and Tendering Processes in Construction and the Built Environment
Unit 9: Measuring, Estimating and Tendering Processes in Construction and the Built Environment NQF Level 3: Guided learning hours: 60 BTEC National Unit abstract Estimating is concerned with the processes
More informationCCNA LAN Switching and Wireless (Exploration 3)
Unit 107: CCNA LAN Switching and Wireless (Exploration 3) Unit code: QCF Level 3: Credit value: 10 Guided learning hours: 80 Aim and purpose K/601/7453 BTEC in IT This unit focuses on a comprehensive,
More informationProject Integration Management
Integration Initiating ning Executing Monitoring & Controlling Closing 4.1 Develop Charter Statement Of Work Business Case 4.2 Develop 4.3 Direct and Manage Work 4.4 Monitor and Control Work 4.5 Perform
More informationCIM Level 6 Diploma in Professional Marketing
CIM Level 6 Diploma in Professional Marketing Mastering Metrics (2201) December 2015 Assignment The assignment comprises THREE compulsory tasks Task 1 is worth 20 marks Task 2 is worth 35 marks Task 3
More informationDigitalMockUp. validationofyourproduct
DigitalMockUp validationofyourproduct DMU technology enables: virtualproductvalidation technicaldocumentation BillOfMaterialandLayoutdefinitioN AssemblySimulation Serviceoperationsimulation Compliancewithcompanyregulation
More informationCarts, Wall Mounts or Both? Exploring the Best Criteria when Implementing EMR Equipment
Carts, Wall Mounts or Both? Exploring the Best Criteria when Implementing EMR Equipment INTRODUCTION Healthcare IT News reports that hospitals are in an EMR (electronic medical record) buying frenzy due
More informationSession 4-Lean Tools- 5S, Kanban, VSM, SMED, TPM
Session 4-Lean Tools- 5S, Kanban, VSM, SMED, TPM Upholstery Frame Workshop NCSU Wood Products Extension Hickory, North Carolina December 10th, 2009 Harry Watt Business Improvement Specialist harry_watt@ncsu.edu
More informationEducation Module for Health Record Practice. Module 7 - Administration and Management of the Health Record Department
Education Module for Health Record Practice Module 7 - Administration and Management of the Health Record Department The health record officer must meet the leadership challenge in his/her quest to develop
More informationValue Stream Mapping
Value Stream Mapping 1 Value Stream Mapping Definition Value Stream Mapping (VSM): Special type of flow chart that uses symbols known as "the language of Lean" to depict and improve the flow of inventory
More informationTRIAX- D. Consulting services to accelerate your supply chain automation outcomes. The resourceful services of Logi-D
010100101001010101010100110010101010101100110011010101010101011001100011010101011 0101010011010100110101001101010010100110101010010101001001010010 0101001011000101011010101100010101001110010010110011010100110101
More informationRenato Pelati is a Lean Manager and the Plant Manager of a Praxair Surface Technologies located in Italy.
Impact of the Lean Manufacturing Tools on ISO 9001 Quality Management System. The Praxair Surface Technologies case study By Andrea Chiarini and Renato Pelati* * Andrea Chiarini is a Contract Professor
More informationVALUE STREAM MAPPING FOR SOFTWARE DEVELOPMENT PROCESS. Ganesh S Thummala. A Research Paper. Submitted in Partial Fulfillment of the
VALUE STREAM MAPPING FOR SOFTWARE DEVELOPMENT PROCESS by Ganesh S Thummala A Research Paper Submitted in Partial Fulfillment of the Requirements for the Master of Science Degree In Management Technology
More informationFive Tips to Achieve a Lean Manufacturing Business
Five Tips to Achieve a Lean Manufacturing Business Executive Overview Introduction The more successful manufacturers today are those with the ability to meet customer delivery schedules while maintaining
More informationTARGET TARGET PROGRESS PROGRESS REPORT REPORT
BASIC KAIZEN TOOLS 1. 1. TARGET PROGRESS REPORT 2. 2. STANDARDIZED WORK SHEET 3. 3. TIME OBSERVATION SHEET 4. 4. CYCLE TIME // TAKT TIME BAR BAR CHART 5. 5. YAMAZUMI (STACK) CHART 6. 6. STANDARDIZED WORK
More information