RELATIONSHIP BETWEEN Sn1 and E1 REACTIONS. SYNTHETIC DRAWBACKS OF Sn1 REACTIONS

Size: px

Start display at page:

Download "RELATIONSHIP BETWEEN Sn1 and E1 REACTIONS. SYNTHETIC DRAWBACKS OF Sn1 REACTIONS"

Colleen Newton
7 years ago
Views:

1 RELATIONSIP BETWEEN Sn1 and E1 REACTIONS SYNTETIC DRAWBACKS OF Sn1 REACTIONS In terms of synthetic value, any reactions whose mechanism involves carbocation formation suffer from some drawbacks. Once formed, carbocations can undergo several process that may result in formation of undesired side products. In the context of Sn1 reactions, some of the things that carbocations can do are: 1) They can go on to form the expected s. ) They can rearrange to form products whose connectivities are changed relative to that of the original substrate. 3) They can undergo elimination (E!) reactions to form alkenes. Examples: C3O OC3 Sn1 product C3 OC3 Rearramged C3 C3O 3C OC3 various alkenes C3 OC3 C3 etc. This limits the synthetic usefulness of such reactions, for one has to deal with mixtures of products and the separation of the desired ones. In fact, Sn1 and E1 reactions typically go hand in hand and are difficult to disassociate, because they share similar characteristics, and the conditions that favor one also favor the other. We ve already learned the characteristics of Sn1 reactions and the factors that favor them. We can extend that to E1 reactions as well: Characteristics of the Sn1 and E1 mechanisms: a) They are multistep processes b) They occur with formation of carbocation intermediates in the rate determining step c) They follow first order (unimolecular) kinetics. That is, rate=k[substrate] Sn1 and E1 mechanisms are favored by using: a) Sterically hindered substrates b) Weak (neutral), small nucleophiles and heating c) Moderate to high polarity solvents The Sn1 mechanism leads to substitution products, and the E1 mechanism leads to formation of alkenes.

2 The same substrates that are prone to undergo Sn1 reactions also undergo E1 reactions. They are of two major types: a) Secondary and tertiary alky halides b) Secondary and tertiary alcohols. ALKYL ALIDES AS Sn1 and E1 SUBSTRATES As mentioned before, conditions that favor Sn1 also favor E1 reactions. The first and rate-determining step in the process is departure of the leaving group to form a carbocation. Let s look at one of the examples from the previous page, the reaction between -bromo-3-methylbutane and methanol. As has been mentioned before, commonly used solvents in Sn1 reactions are water and alcohols. They frequently also double as nucleophiles. In E1 reactions these same substances would act as bases to capture a proton in the elimination step. C3O Once formed, the carbocation can: a) Go on to form the. Remember that when the nucleophile is a neutral protic solvent, its conjugate base replaces the leaving group. This implies that a proton () gets released in the process. C3O OC3 The bromide ion released in the first step and the proton released in the second step can then get together to form, which is an inorganic product of the reaction. owever, we will not focus on inorganic products. As a matter of fact, inorganic products are frequently left out when writing organic reactions and mechanisms to avoid clutter and keep the focus on the organic products. b) Rearrange to a more stable cation. We already mentioned that this can happen by an alkyl or a hydride shift, depending on which process yields a more stable cation. This cation can in turn form another Sn1 product. This is a structural isomer of the one formed in (a) because its connectivity has changed. shift C3O OC3

3 c) Eliminate a proton to form an alkene. Remember that when there is a positive charge on carbon, the neighboring protons become highly acidic. The solvent acting as a weak base can capture one of these protons and cause an electron shift towards the positive charge that results in formation of a new pi bond, or alkene product. When the protons surrounding the positive charge are nonequivalent, several alkenes are possible, as illustrated below. 3 C C 3 C 3 The protons shown in red are now acidic due to the presence of the positive charge on carbon Secondary cation before rearrangement C 3 1 O C3 C 3 3 C C The solvent can now act as a base 3 C C alkene product C 3 C 3 3 C C 3 C C 3 alkene product 3 C O 1 The rearranged cation can undergo similar elimination processes to yield two possible alkenes, but one of them is the same as one of the alkenes formed above, with the pi bond located between carbons and 3. As an exercise, see if you can identify the protons which are acidic, how they are eliminated, and how electron movement takes place to form the alkene structures shown below. E1 (same as formed above) E1 ( same as )

4 Thus we have the net reaction we introduced on page 1, showing the formation of Sn1 and E1 products: C3O OC3 Sn1 product etc. OC3 Rearramged various alkenes Can you now explain (mechanistically) how the various products form in the second example given on p.1? C3 C3O C3 OC3 3C C3 C3 OC3 C ALCOOLS AS Sn1 and E1 SUBSTRATES The classic textbook example of E1 elimination reactions is the acid-catalyzed alcohol dehydration. Strong acid catalysis is needed to protonate the hydroxyl group of alcohols and turn it into a good leaving group. For alcohols which are soluble in water, an aqueous solution of strong acid is usually used. Such solution contains a high concentration of hydronium ion (the conjugate acid of water), which acts as the proton donor. This first protonation step is an acid-base reaction, and as such it takes place very rapidly. The protonation of 4-methylcyclohexanol illustrates this step. O O 3O C3 O C3 Once protonated, the hydroxyl group can leave as water, leaving behind a positively charged carbon. This is the rate determining step in the sequence. O O C3 C3

5 The elimination step takes place after formation of the carbocation, with water acting as a base. O 3 O C 3 C 3 Notice that each step in this mechanism is reversible. This means that the acid-catalyzed alcohol dehydration is an equilibrium process. As such, equilibrium must be manipulated to shift the outcome towards the desired product. This reaction enables us to make alkenes from alcohols, or alcohols from alkenes. Typically, formation of alkenes is favored by use of concentrated acid, whereas formation of alcohols is favored by use of dilute acid. The following sequence shows the steps in reverse, starting with an alcohol, and arriving at an alkene. 1 O O C 3 C 3 alkene protonation O O C 3 C 3 1 O O O 3 O C 3 C 3 O NET REACTION: 3 O C 3 C 3

6 ELIMINATIONS INVOLVING ASYMMETRICAL SUBSTRATES In some eliminations the products include several possible alkenes. The next question is then, which ones form preferentially? Is there a rule for predicting which alkene will predominate? Let s look at the following examples given before, but this time let s focus only on the alkene products. C3O Saytzeff s rule enables us to make a prediction. According to this rule, in elimination reactions, the most highly substituted alkene usually predominates. For details, refer to the Wade textbook, section 6-19 (5th ed.) or 6-18 (6th ed.). The most highly substituted alkene is the one with the most alkyl groups directly attached to the carboncarbon double bond. This of course does not include hydrogens attached to the carbon-carbon double bond. In the above example, we have mono, di, and trisubstituted products. According to Saytzeff s rule, the trisubstituted product will predominate because it is the most stable. monosubstituted alkene disubstituted alkene trisubstituted alkene Why is the trisubstituted alkene more stable than the other two? The relative stabilities of alkenes is measured by their heat of hydrogenation (much like the relative stabilities of cycloalkanes is measured by their heats of combustion, see ch. 3). The relationship is inverse: the higher the heat of hydrogenation, the lower the stability, because the higher the heat of hydrogenation, the higher the potential energy of the alkene. For a full discussion of this trend with tables, refer to the Wade textbook, section 7-7 (A-D) in both the 5th and the 6th eds. Please note that in the case of cis and trans isomers, the higher stability of the trans isomer is due to a steric effect. The alkyl substituents in the cis isomer are closer to each other than in the trans isomer, leading to increased steric crowding. 3C C3 C3 cis 3C trans

7 Let s look at the last example. In this case we have di and trisubstituted products. Once again, the trisubstituted product will be predominant because it is the most stable. C 3 C 3 O C 3 C 3 C C 3 C disubstituted trisubstituted (most stable)

ORGANIC CHEMISTRY I PRACTICE EXERCISE Sn1 and Sn2 Reactions

ORGANIC CHEMISTRY I PRACTICE EXERCISE Sn1 and Sn2 Reactions ORGANIC CEMISTRY I PRACTICE EXERCISE Sn1 and Sn2 Reactions 1) Which of the following best represents the carbon-chlorine bond of methyl chloride? d d - d - d d d d - d - I II III IV V 2) Provide a detailed,