PRODUCT CATALOGUE. Europe and Asia

Size: px
Start display at page:

Download "PRODUCT CATALOGUE. Europe and Asia"

Transcription

1 PRODUCT CATALOGUE Europe and Asia

2 Product catalogue Table of contents Company overview 3 Railway steel 9 Rails 10 Rails for underground railways 14 Tram rails 15 Crane rails 16 Stainless steel rails 17 Rail fastenings 18 Railcar building shapes 20 Railway wheels, black wheels, wheel centers 22 Tires/Rings 26 Axle blanks 27 Structural steel 29 Hot rolled rebar steel for reinforced concrete structures 30 Thermomechanically hardened rebars for reinforced concrete structures 31 Round bars 32 I-beams 33 Channels 46 Hot rolled angles 50 Hexagonal bar 55 Sheet piles 56 Flat products 58 Industrial steel 61 Pit props 62 Monorail 63 Grinding balls 64 Side bars for mining trough Grinding mill lining sections 66 Round bars 68 Rings 68 Automobile wheel rim sections 70 Grouser bar 71 Hot die-rolled flat plowshare bars 72 Electrolysis flat bar 73 Wire steel 75 Semi-products 81 Seamless pipe blanks 82 Square bars and blooms 83 Conticast material 84 Mandrel bar 85 Pig iron 86 Annex. Complete certificate list 89 Exhibit. Production companies 103

3

4 Company overview

5 4 making the world stronger

6 Company overview EVRAZ EVRAZ is one of the world s largest vertically integrated steelmaking and mining businesses and owns companies in Russia, Ukraine, the USA, Canada, the Czech Republic, Italy and South Africa. EVRAZ is listed among the world s 20 largest steel manufacturers in terms of the output. EVRAZ trades raw materials and rolled steel products in both Russian and international markets. EVRAZ exports the semis, structural long and flat products, railway steel and industrial steel to the European and Asian markets. 5

7 s The high quality of EVRAZ`s products is supported by a number of certificates.

8 EVRAZ NTMK EVRAZ ZSMK ЕVRAZ DMZ Petrovskogo EVRAZ Vitkovice Steel The list of all certificates is shown in the Exhibit hereafter. 7

9

10 Railway steel

11 making the world stronger Rails Railway rails Rails are manufactured at the rail mills of EVRAZ ZSMK, EVRAZ NTMK and EVRAZ DMZ Petrovskogo. counter-rail angle SP850 Railway rails Rail type Specification Weight Weight of 1 m kg Rail depth H Web depth h Cross section Head width b Base width B Web thickness e Flange depth m Manufacturer R43 ТS EVRAZ ZSMK, EVRAZ DMZ Petrovskogo R50 GOST R EVRAZ ZSMK, EVRAZ NTMK R65 GOST R EVRAZ ZSMK, EVRAZ NTMK R65К GOST R EVRAZ ZSMK, EVRAZ NTMK 54E1 (UIC 54) EN : EVRAZ ZSMK 60 E1 EN : * EVRAZ NTMK UIC 60 UIC EVRAZ NTMK UR 65 TU 32 ZP EVRAZ ZSMK OR 43 TU 14-2Р EVRAZ ZSMK UR 65 TU 32 ZP EVRAZ ZSMK OR 43 TU 14-2Р EVRAZ ZSMK OR 50 GOST GOST TU 32 ZP OR 65 GOST GOST TU 32 ZP EVRAZ ZSMK EVRAZ ZSMK RK50 GOST EVRAZ ZSMK RK65 GOST EVRAZ ZSMK Counter-rail angle SP 850 TU Section dimensions shown on the attached drawing EVRAZ ZSMK *In the upper part at

12 Railway steel Rail versions manufactured by EVRAZ NTMK Rail type Application Steel grade and category Rail length m R50, R65 Rails for seamless tracks, ribbon tracks and switches K76F, E76F (Т1, Н) 25 and shorter R65 (special purpose) Heat hardened railway rails for combined high-speed traffic. Intended primarily for laying in the railway sections used for combined high-speed traffic. These rails show improved geometry against Т1 rails under GOST R Heat hardened railway rails for low-temperature applications. Primarily intended for operation in the railways in cold regions К76F (SS) 25 K76F (NK) E 1 Heat hardened railway rails. Intended for seamless tracks, ribbon tracks and switches R350НТ (Class Y, B) 25 UIC 60 Raw railway rails intended for seamless tracks, ribbon tracks and switches 900А 25, 24, 18 R65, R65K (special purpose) Heat hardened railway rails for 600 m and shorter radius track curves K76F (Т1) 25 R50, R65 (for underground railway systems) Raw rails intended for laying in the underground railway systems K76F, E76F (N) m rails are shipped on a pair of coupled flat wagons. Class Т1 heat hardened rails; Class N raw rails; Class SS rails for combined high-speed traffic; Class NК rails for low temperature applications. Rail versions manufactured at EVRAZ ZSMK (rail rolling facility) Rail type Application Class Rail length R65, R50, UIC 60 R65 (special purpose) Intended for seamless tracks, ribbon tracks and switches Heat-hardened railway rails for low-temperature applications. Primarily intended for use in railways in cold regions E76F (Т1, N, V) E76F (NE76F) N-class: ; 12.5; ; 25; Т1-class: 12.5; ; 25 Heat hardened railway rails for combined high-speed traffic. Intended primarily for laying in railway sections used for combined high-speed traffic. These rails show improved geometry against Т1 rails under GOST R E76F (SS) Prime quality heat-hardened rails E76F (В) R65, R65K (special purpose) Heat-hardened railway rails for 600 m and shorter radius track curves E90AF (IK) R50, R65 (for underground railway systems) Raw rails for underground railway systems E76F E78HSF 54Е1 (UIC 54) These rails are intended for seamless tracks, ribbon tracks and switches 900А subject to agreement with the customer, 60Е1 (UIC 60) not to exceed 25 m UR 65 Intended for the manufacturing of unbroken railway crossings with continuous running surface E76F, E ; the multiple of the exact length subject to agreement with the customer within 25 m; without bolt holes R43 Intended for laying in industrial railway tracks E76 25; 8.0 to 12.5 m rails can be supplied 11

13 making the world stronger Rail type Application Class Rail length OR 43 Used for the manufacture of in-plant railway switches and for circular rails of excavator rotary supports ОR 50 Used for the manufacture of switches E73V, E76HSF E72 subject to agreement with the customer, however not to exceed 25 m OR 65 RК50, RК65 Used in track superstructures for R65, R50 rails E68 Subject to agreement with the customer Counter-rail angle SP 850 The 25 m rails are shipped on a pair of coupled flat wagons. The modernized rail and beam plant, when complete, will enable EVRAZ ZSMK to manufacture 100 m heat-hardened rails. Class Т1 heat hardened rails; Class N raw rails; Class SS rails for combined high-speed traffic; Class IK high wear resistance and back-to-back endurance; Class V prime quality heat hardened rails. 12

14 Railway steel Narrow gauge rails Manufactured at the rail facility of EVRAZ ZSMK, and by the rail mill of EVRAZ DMZ Petrovskogo. Narrow gauge railway rails Rail type Specification Weight 1 m kg Rail depth H Cross-sectional dimensions, Web depth h Head width b Base width B Web thickness e Flange depth m Manufacturer R33 TU 14-2R EVRAZ NTMK R34* TU : ЕVRAZ DMZ Petrovskogo *Rails are supplied without bolt holes. Narrow gauge rail grades Rail type Application Steel grade, category Rail length m R33 R34 Mine conductor rails. Also used for plant railway tracks, mine car tracks, crane runways VP, PP, NP* 8, 10 N50 (PS, SP)** T60 (PS, SP) PT70 (PS, SP) 8, 10, 11 Note: * VP high-strength (carbon 0.60 to 0.82%); PP higher-strength (carbon 0.50 to 0.59%); NP normal strength (carbon 0.40 to 0.49%). ** N normal hardness (carbon 0.4 to 0.55%, 170 НВ); Т high hardness (carbon 0.56 to 0.66%, 200 НВ); PT higher hardness (carbon 0.67 to 0.82%, 250 НВ). 13

15 making the world stronger RAILS FOR UNDERGROUND LINES Rails R50 and R65 for underground lines Raw rails for underground lines. Produced at the rail rolling facility of EVRAZ ZSMK and at the rail mill of EVRAZ NTMK. Material and profile specification Rail type Specification N В b S Steel grade Supply conditions R50 GOST R К76F, E76F, R E78HSF Rail length 12.5 & 25 m, with and without bolt holes E78HSF steel grade rails are made as per TU Сonductor rails for underground car power supply Conductor rails for underground car power supply in Russia, Ukraine and the other CIS countries. Manufactured at the medium-section mill 550 at rolling-mill shop 2 of EVRAZ DMZ Petrovskogo. Dimensions (*) are given for roll gap engineering, ensured by process tools and not checked on finished rails. Material and profile specification Specification Cross section area cm² Weight of 1 m kg Steel grade Supply conditions TU U : М Rail length 6.0 to 12.5 m, length tolerance limit within ± 30 Steel chemistry Steel grade Element weight percentage % С Мn not over Si S P Cr Ni Cu N М

16 Railway steel TRAM RAILS Rails for tram lines. Manufactured at the rail mill of EVRAZ DMZ Petrovskogo, and by the rail rolling facility of EVRAZ ZSMK. RTZhB-58 rails Т62 rails Material and profile specification Rail type Specification Steel grade Weight of 1 m kg Supply conditions Manufacturer RTZhB-58 TU U К75, K63F Cut to lengths 10.0 to 11.5 m. Length tolerance ± 100. Up to 15% of the short rails are allowed per a lot supplied, however not shorter than 4 m, by agreement with the customer. ЕVRAZ DMZ Petrovskogo Т62 TU 14-2Р E With/without bolt holes, 12.5 m long, length tolerance ± 10 EVRAZ ZSMK Т62 rails are used for the curves. 15

17 making the world stronger CRANE RAILS For crane runways. Manufactured at the rail mill of EVRAZ DMZ Petrovskogo and at the rail rolling facility of EVRAZ ZSMK. Material and profile specification Rail type Sizes Cross section area cm² b b1 b2 h h1 h4 EVRAZ DMZ Petrovskogo Weight of 1 m kg EVRAZ ZSMK Manufacturer KР ЕVRAZ DMZ Petrovskogo КR ЕVRAZ DMZ Petrovskogo, EVRAZ ZSMK KR ЕVRAZ DMZ Petrovskogo, EVRAZ ZSMK КR ЕVRAZ DMZ Petrovskogo, EVRAZ ZSMK КR ЕVRAZ DMZ Petrovskogo In terms of the product mix, chemistry and mechanical properties the rails manufactured at EVRAZ DMZ Petrovskogo comply with the requirements of DSTU (GOST ) and those manufactured at EVRAZ ZSMK comply with GOST SUPPLIED LENGTHS (EVRAZ ZSMK): Exact length (m): 9.0; 9.5; 10.0; 10.5; 11.0; 11.5; 12.0 m (± 50 ). Random lengths: 4.0 to 12 m. Rails are shipped both as single pieces and in bundles strapped crosswise by steel straps or wire. SUPPLIED LENGTHS (EVRAZ DMZ PETROVSKOGO): Exact length (m): 9.0; 9.5; 10.0; 10.5; 11.0; 11.5; 12.0 m. Length tolerance ± 50 (± 100 subject to agreement with the customer) Random lengths: 4.0 to 12 m. The random lengths may be up to 20% of a shipment. Rails are shipped both piece by piece and in bundles strapped crosswise by steel straps or wire. 16

18 Railway steel STAINLESS STEEL RAILS For railway switches. Manufactured at EVRAZ ZSMK rail plant. Material and profile specification Specification Section depth Head width Base width Steel grade Supply conditions TS H18N10Т as per GOST 5632 Manufactured in lengths 6.0 to 12.0 m and loaded on any transport vehicle. Surface quality, mechanical properties, section weight and cross-sectional area not specified. No lamination, internal cracks and foreign metal and slag inclusions are accepted in the product. 17

19 making the world stronger RAIL FASTENINGS Manufactured by NSMZ branch of EVRAZ NTMK and by the rail fastening plant of EVRAZ ZSMK rail rolling facility. Product name Specification Steel grade Application Manufacturer Non-hardened baseplates for separate fastenings types КB50, КB65, SК50, SК65 Non-hardened baseplates for fastenings types КD50 and КD65 TU 14-2R St3, St4 The baseplates are intended for use in all climate zones, and for all railway lines where concrete sleepers are used TU 14-2R St3, St4 The baseplates are intended for laying of separate rail fastenings on timber sleepers NSMZ NSMZ Non-hardened baseplates for separate fastening of KN-65 rails drawing ОP , GOST & ОP 530 TU-2 St3, St4 For R65 rails mounted on Sh1-КN concrete sleepers by the use of КN-65 fastenings NSMZ D50 and SD50 baseplates for spike fastenings GOST , GOST St3, St4 D50 baseplates are intended for tilted rail tracks SD50 baseplates are intended for non-tilted rail tracks NSMZ D65 and SD65 baseplates for spike fastenings GOST , GOST St3, St4 D65 baseplates are intended for rails fastened onto timber sleepers and logs and offer the inward tilt of the rail lines. SD65 baseplates are intended for non-tilt rail lines NSMZ DN6-65 baseplates for spike fastenings GOST St3, St4 DN6-65 baseplates are used for curves laid with R65 rails and R75 rails NSMZ DN65S-185 baseplates for spike fastenings GOST St3, St4 DN65S-185 baseplates are used for curves laid with R65 and R75 rails NSMZ Stirrup stop ZP 369 TU-2 St3 Stirrup stops are intended for fixing R65 rails to concrete sleepers by baseplate-free fastening type ZhBR-65 NSMZ Flat bar for stirrup stop ТS TU , GOST St3 Intended for use with stirrup stops EVRAZ ZSMK PK clamp GOST , GOST St4, St4sp, as per GOST , class 1 & 2 as per GOST Rigid PK-type clamps are used for fastening railway rails to concrete and timber sleepers with separate fastenings NSMZ EVRAZ ZSMK Flat bar for separate fastening clamps. TU , GOST , GOST St 4sp Intended for the manufacture of intermediate clamps EVRAZ ZSMK R50 & R65 fishplates TU 14-2R , GOST R50 and R65 fishplates are used for wide-gauge railway rail joints NSMZ EVRAZ ZSMK Baseplate type ZhBRM GOST St4, St3 Baseplates for ZhBR-65 inseparable-type rail fastenings used with concrete rail supports NSMZ Plunger blank for insulated rail joints TS , TS The plunger blanks are intended for the manufacture of combination (metal composite) fishplates for high-strength bolt-adhesive insulated joints EVRAZ ZSMK 18

20 Railway steel Some of the rail fastening sections: Double headed fishplates for R65 and R50 railway rails under GOST Plunger blank for insulated rail joints TS TS Stirrup stop Clamps for separate-type railway rail fastenings 19

21 making the world stronger RAILCAR BUILDING SHAPES Manufactured at EVRAZ NTMK (channel type 20V-2 and Z-beams are manufactured at the rail mill and the I-beams for railcar building and the railcar pillars are manufactured at the heavy section plant). 20V-2 channel X Y X R5,5 R11 6% 11 Y Material and profile specification Section specification Cross-sectional area cm 2 Weight of 1 m kg Steel code Class Grade Chemistry specification Technical specification Supplied lengths, bar length m GOST G2S 09G2SD 09G2D G2F 12G2FD G2F 12G2FD GOST GOST , GOST TU TU , GOST Exact length 6 to 12; random length Z-beams Material and profile specification Section specification Cross-sectional area cm 2 Weight of 1 m kg class Steel code grade Chemistry specification Technical specification Supplied lengths, bar length m GOST G2S 09G2SD 09G2D G2F 12G2FD G2F 12G2FD GOST GOST , GOST TU TU , GOST Exact length 10.8 to 15.8; random length 20

22 Railway steel H-beam #19 Material and profile specification Section specification Cross-sectional area cm 2 Weight of 1 m kg Class Steel code Grade Chemistry specification Technical specification Supplied lengths, bar length m GOST G2S 09G2SD 09G2D G2F 12G2FD G2F 12G2FD GOST GOST , GOST TU TU , GOST Exact length m; the multiple of the exact length; random length Wagon pillars Material and profile specification Section specification Cross-sectional area cm 2 Weight of 1 m kg class Steel code grade Chemistry specification Technical specification Supplied lengths, bar length m GOST G2S 09G2SD 09G2D G2F 12G2FD G2F 12G2FD GOST GOST , GOST TU TU , GOST Exact length m; the multiple of the exact length; random length 21

23 making the world stronger RAILWay WHEELS, BLACK WHEELS, WHEEL CENTERS Manufactured at the wheel and tire plant of EVRAZ NTMK. Domestic market Product name Application Diameter along the taping line Section specification Steel grade Technical specification Solid wheels with plain taper plate/web For freight wagons 957±7 Figure А.1 GOST , T GOST Solid wheels with curvilinear plate/web For freight wagons 957±7 Figure А.3 GOST Т GOST Solid wheels with plain taper plate for repairs For freight wagons Drawing 950А 2 GOST Solid wheels for repairs For industrial rolling stock Drawing 082А-2 2, Т GOST , TU 14-2R Solid wheels For special rolling stock Drawing GOST

24 Railway steel Product name Application Diameter along the taping line Section specification Steel grade Technical specification Solid wheels For special rolling stock Drawing GOST Solid wheels For yard locomotives Drawing GOST Solid wheels* For high-speed electric locomotives Drawing 8ТS GOST Black wheels For underground railways 785 Drawing 073V-1 2 GOST , TU Black wheels For underground railways 860 Drawing GOST , TU Black wheels For underground railways 860 Drawing GOST , TU *Can be produced but not yet certified for conformity. 23

25 making the world stronger Product name Application Diameter along the taping line Section specification Steel grade Technical specification Black wheels For ingot cars 840 Drawing B 2 GOST , Technical Agreement Gear blank For electric locomotives 989 Drawing 077А-2 55F TU 14-2R Gear blank For electric locomotives 972 Drawing HN, 55F, 20H2N4А Technical agreement Wheel centers For electric locomotives ,5 0,5 Drawing 2ES TU 14-2R Wheel centers For electric locomotives 1070,6 +1 Drawing NTMK/ EP2К TU 14-2R Wheel centers For electric locomotives 1070,6 +1 Drawing NTMK/ EP2К TU 14-2R

26 Railway steel Foreign market Product name Application Diameter along the taping line Section specification Steel grade Technical specification Solid wheels with curvilinear plate/web* For freight wagons Drawing 131 (VA 002) ER7 EN 13262:2004+ A2:2011 Solid wheels with curvilinear plate/web* For freight wagons Drawing (BA 319) ER7 EN 13262:2004+ A2:2011 Solid wheels with curvilinear plate/web* For freight wagons Drawing (BA 318) ER7 EN 13262:2004+ A2:2011 Solid wheels with curvilinear plate/web For freight wagons 914,4+14 Drawing (H-36) Class C AAR M107/M208:2011 Solid wheels For ingot cars Drawing ER9 EN 13262:2004+ A2:2011 *Can be produced but not yet certified for conformity. 25

27 making the world stronger TIRES/RINGS Manufactured at the wheel and tire plant of EVRAZ NTMK. Material and profile specification Product name For wide gauge railway locomotives (flanged) For wide gauge railway cars and tenders (flanged) Basic dimensions d x B x H 1690 x 143 x x 143 x x 143 x x 143 x x 143 x x 143 x x 143 x x 134 x x 134 x x 134 x x 134 x x 134 x 83 Section specification Steel grade Technical specification GOST R , drawing 001А 2 GOST GOST Р , drawing TU GOST , drawing GOST For underground rolling stock 650 x 134 x 70 R GOST , R

28 Railway steel AXLE BLANKS Manufactured at the rail mill of EVRAZ NTMK. Material and profile specification Cross-sectional dimensions 215 х х 230 Section specification Steel grade Technical specification Supplied lengths GOST ОS GOST Exact length (to be agreed upon in the P.O.) 27

29

30 Structural steel

31 making the world stronger HOT ROLLED REBAR STEEL FOR REINFORCED CONCRETE STRUCTURES Hot rolled steel for reinforcement of both normal and pre-stressed reinforced concrete structures. The rolled steel is manufactured at the structural steel facility of EVRAZ ZSMK. Profile and material specification Hot rolled rebars Mill Diameter Steel classes Chemistry specification Technical specification Supply conditions, product length m p/s m/s 250-1; m/s 250-2; s/s ; 10 12; 14; 16; 18; 20; 22; 25; 28; 32; 36; 40 А-II (А300), As-II (As300), А-III (А400) А-I (А240), А-II (А300), As-II (Аs300), А-III (А400) А-I (А240), А-II (А300), As-II (Аs300), А-III (А400) GOST St 5 sp St 5 ps St 3 ps St 3 sp GOST : 10GT 35GS 25G2S GOST Coils up to 830 kg Supplied in coils up to 830 kg (# 6-10) and bundles up to 10 tons (# 10-40). 30

32 Structural steel THERMO-MECHANICALLY HARDENED REBARS FOR REINFORCED CONCRETE STRUCTURES Thermo-mechanically hardened rebars intended for reinforcement of both normal and pre-stressed reinforced concrete structures. Rebars of classes GP10, GP15, GP20 and Av600 are designed for use in mining industry, including for the manufacture of anchor chain. The products are manufactured at the structural steel facility of EVRAZ ZSMK. Profile under GOST R Profile under TU Thermomechanically hardened rebars Material and profile specification Mill Diameter Steel class (diameter nominal) Chemistry specification Technical specification Supplied lengths, bar length m m/s 250-1; m/s 250-2; s/s , 12, 14, 16, 18, 20, 22, 25, 28, 32, 36, 40, 50 A400С; А500С (10-28, 32-50); Av400С; Av500С (16, 20, 22, 25); А500SP (10-28, 32-40); Ac500С (10-28, 32-40); 460V (10, 12, 16, 20, 25, 32, 40, 50); 460 (10, 12, 16, 20, 25, 32, 40, 50); At400S; At500S (10-18, 32-40); At800 (10-18); GP10; GP15, GP20(16, 20, 22, 25), Av600(22) GOST : St 5 sp St 5 ps St 3 ps St 3 sp St3Gsp GOST : 18G2S GOST : 28S TU TU , GOST R , STO ASCHM 7-93, TU , TU , GOST , BS 4449:1997, CS2-95, TU , TU The products are supplied in bundles of up to 10 tons. 31

33 making the world stronger ROUND BARS Hot rolled round bars. Manufactured at the structural and rail steel facilities of EVRAZ ZSMK and at the heavy section mill of EVRAZ NTMK. Profile mix Manufacturer: Mill Diameter Steel grade Chemistry specification Technical specification Supplied lengths, bar length EVRAZ ZSMK (structural steel facility): p/s EVRAZ ZSMK (constructional steel rolling facility): m/s 250-1; m/s 250-2; s/s 450 Bar in coils: 6.5; 8; 9; 10 Round bars as rods: 10; 12; 14; 16; 18 25; 28; 30; 32; 34; 36; 40; 42; 45; 48 St1kp-St3kp St3ps-St5ps St3sp-St5sp Sv08G2S and other St1kp-St3kp St3ps-St5ps St3sp-St5sp Sv08G2S 10-45, 40х 10kp-20kp and other GOST , GOST , GOST , GOST , GOST , TU , TU , TU GOST , TU , TU , TU , TU , TU GOST , GOST , GOST , GOST , GOST Coils up to 830 kg Cut to 12 m rods EVRAZ ZSMK (rail steel facility): Rail and structural steel plant, mill 450 Round bars: 30; 32; 33; 34; 35; 36; 38; 40; 42; 45; 46; 48; 50; 52; 53; 55; 56; 58; 60; 65; 70; 75; 80; 85; 90; 95; 100; 110; 120; 140; 150 ST 3, St 5, 20, 35, 40, 09G2S, 65G GOST , GOST , GOST , GOST 19281, GOST GOST , GOST , GOST Exact length, the multiple of the exact length and random length EVRAZ NTMK: Heavy section plant Round bars: 70; 75; 80; 85; 90; 100; 105; 110; 115; 120; 130; 140; 150 StЗsp-St6sp, 08-60, 15G 50G, 65, 70, 60G 70G, 265, 295, 09G2S, 10G, 2S1 GOST , GOST , GOST , GOST , GOST GOST , GOST , GOST , GOST , GOST , GOST * Exact length m; the multiple of the exact length; random length * Round bars diameter up to 100 under the technical requirements of GOST

34 Structural steel I-BEAMS These products are manufactured at EVRAZ NTMK, EVRAZ ZSMK and EVRAZ DMZ Petrovskogo. Parallel flange I-beams STO ASCHM Manufactured at the H-beam rolling plant (HBRM) of EVRAZ NTMK. I-BEAM PROFILE Axis values for reference: I momentum of inertia; W moment of resistance; S first moment (half section); i radius of inertia. Profile mix Profile identifier Profile dimensions Crosssectional area F m 2 Weight of 1 m kg Axis values for reference h b s t R I x, cm 4 W x, cm 3 S x, cm 3 i x, cm i y, cm 4 W y, cm 3 i y, cm Normal I-beams 20 B B B B B B B B B B B B B B B B B B B B H-beams 20 SH SH SH SH SH

35 making the world stronger Profile identifier Profile dimensions Crosssectional area F m 2 Weight of 1 m kg Axis values for reference h b s t R I x, cm 4 W x, cm 3 S x, cm 3 i x, cm i y, cm 4 W y, cm 3 i y, cm 35 SH SH SH SH SH SH SH SH SH SH SH SH SH SH SH SH SH Column beams (UC) 20 K K K K K K K K K K K K K K K K

JIS G3444 Carbon steel tubes for general structural purposes

JIS G3444 Carbon steel tubes for general structural purposes JIS G3444 Carbon steel tubes for general structural purposes 1. Scope This Japanese Industrial Standard specifies the carbon steel tubes (hereafter referred to as "tubes") used for civil engineering, architecture,

More information

TARIFF CODE and updates standard

TARIFF CODE and updates standard TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of

More information

AISI CHEMICAL COMPOSITION LIMITS: Nonresulphurized Carbon Steels

AISI CHEMICAL COMPOSITION LIMITS: Nonresulphurized Carbon Steels AISI CHEMICAL COMPOSITION LIMITS: Nonresulphurized Carbon Steels AISI No. 1008 1010 1012 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 10 1026 1027 1029 10 1035 1036 1037 1038 1039 10 1041 1042 1043

More information

Lecture slides on rolling By: Dr H N Dhakal Lecturer in Mechanical and Marine Engineering, School of Engineering, University of Plymouth

Lecture slides on rolling By: Dr H N Dhakal Lecturer in Mechanical and Marine Engineering, School of Engineering, University of Plymouth Lecture slides on rolling By: Dr H N Dhakal Lecturer in Mechanical and Marine Engineering, School of Engineering, University of Plymouth Bulk deformation forming (rolling) Rolling is the process of reducing

More information

SECTION 15076 CEMENT-MORTAR LINED AND COATED STEEL PIPE

SECTION 15076 CEMENT-MORTAR LINED AND COATED STEEL PIPE SECTION 15076 CEMENT-MORTAR LINED AND COATED (CML&C) STEEL PIPE PART 1 GENERAL 1.01 DESCRIPTION This section designates the requirements for steel pipe fabrication, test in shop, installation of steel

More information

Rolling - Introductory concepts

Rolling - Introductory concepts Rolling - Introductory concepts R. Chandramouli Associate Dean-Research SASTRA University, Thanjavur-613 401 Joint Initiative of IITs and IISc Funded by MHRD Page 1 of 8 Table of Contents 1. Rolling -

More information

JIS G3472 Electric Resistance Welded Carbon Steel Tubes for Automobile Structural Purposes

JIS G3472 Electric Resistance Welded Carbon Steel Tubes for Automobile Structural Purposes JIS G3472 Electric Resistance Welded Carbon Steel Tubes for Automobile Structural Purposes 1. Scope This Japanese Industrial Standard specifies the electric resistance welded carbon steel tubes, hereinafter

More information

JIS A5525 Steel pipes piles

JIS A5525 Steel pipes piles JIS A5525 Steel pipes piles 1. Scope This Japanese Industrial Standard specifies the welded steel pipe piles (hereafter referred to as "piles"), used in the foundation of structures such as civil engineering

More information

ENGLISH FORK GUIDE 2013

ENGLISH FORK GUIDE 2013 FORK GUIDE 2013 ENGLISH 1 With a brand which is synonymous with specialists in forest products handling attachments, BOLZONI AURAMO offers its expertise and market leading attachments for all requirements,

More information

High Strength Steel (HSS) tubes for structural and engineering applications

High Strength Steel (HSS) tubes for structural and engineering applications High Strength Steel (HSS) tubes for structural and engineering applications 2 Tenaris produces a large dimensional range of seamless tubes in high strength steel for engineering and structural applications

More information

CT-02 CABLE TRAY SYSTEMS

CT-02 CABLE TRAY SYSTEMS CT-02 CABLE TRAY SYSTEMS SYSTEMS THAT MAKE SENSE Introduction B-Line Systems was formed in 96 and has over 30 years experience manufacturing cable tray systems in which it has grown to become the industry

More information

Flash Butt Welding Machines

Flash Butt Welding Machines Flash Butt Welding Machines Types AS 15 - AS 320 Flash butt welding current brake current (ka) current time flattening reversal preheating welding time flash butting forging A reliable and economic process

More information

Highly flexible couplings

Highly flexible couplings Construction and operation 8.03.00 Instructions for installation 8.03.00 Types of stress 8.04.00 Diagrams for static deformation of the coupling ring 8.05.00 Coupling size 8.07.00 Examples of combinations

More information

Hot-rolled Flat Products

Hot-rolled Flat Products ArcelorMittal Ostrava Hot-rolled Flat Products Production programme Contents 4 Technology Description and Used Terminology 6 Steel Grades, Chemical Composition 10 Semi-Finished Products (Continuously

More information

Gas Distribution and Transportation

Gas Distribution and Transportation Piping System Includes: Pipe Fittings (e.g. elbows, reducers, branch connections, etc.) Flanges, gaskets, bolting Valves Associations involved in generating Codes for piping Design Engineering: ASME ANSI

More information

SPECIFICATIONS FOR STEEL PIPE

SPECIFICATIONS FOR STEEL PIPE SPECIFICATIONS FOR STEEL PIPE Published pipe standards serve three functions. 1. They dictate manufacturing and testing requirements and prescribed methods of measuring the required mechanical and physical

More information

North American Stainless

North American Stainless North American Stainless Long Products Stainless Steel Grade Sheet 2205 UNS S2205 EN 1.4462 2304 UNS S2304 EN 1.4362 INTRODUCTION Types 2205 and 2304 are duplex stainless steel grades with a microstructure,

More information

Stainless steel grade chart

Stainless steel grade chart Stainless steel grade chart ATLAS STEELS METAL DISTRIBUTION Chemical analysis (%) specified C Si Mn P S Cr Mo Ni Other Austenitic stainless steels 253MA S30815 0.05 1.1-2.0 0.8 0.040 0.030 20.0-22.0 10.0-12.0

More information

SPECIFICATIONS FOR STEEL PIPE

SPECIFICATIONS FOR STEEL PIPE SPECIFICATIONS FOR STEEL PIPE Published pipe standards serve three functions. 1. They dictate manufacturing and testing requirements and prescribed methods of measuring the required mechanical and physical

More information

QUALITY ASSURANCE MANUAL

QUALITY ASSURANCE MANUAL MMFX STEEL CORPORATION OF AMERICA 2415 CAMPUS DRIVE SUITE 100 IRVINE, CA 92612 TELEPHONE (949) 476-7600 FACSIMILE (949) 474-1130 WWW.MMFXSTEEL.COM QUALITY ASSURANCE MANUAL 5 th Edition August 2011 This

More information

TS 813 GROUNDING AND BONDING TTD 813.001 TRAFFIC SIGNAL INSTALLATION AND CONTROLLER CABINET GROUNDING SYSTEM TTD 813.005 CONTROLLER CABINET GROUNDING

TS 813 GROUNDING AND BONDING TTD 813.001 TRAFFIC SIGNAL INSTALLATION AND CONTROLLER CABINET GROUNDING SYSTEM TTD 813.005 CONTROLLER CABINET GROUNDING TORONTO TRANSPORTATION January 2012 TS 813 GROUNDING AND BONDING TABLE OF CONTENTS 1. DRAWINGS TTD 813.001 TRAFFIC SIGNAL INSTALLATION AND CONTROLLER CABINET GROUNDING SYSTEM TTD 813.005 CONTROLLER CABINET

More information

Welded Fabric. The CARES Guide to Reinforcing Steels Part 5. Installation of welded fabric on a major contract. 1.0 Introduction

Welded Fabric. The CARES Guide to Reinforcing Steels Part 5. Installation of welded fabric on a major contract. 1.0 Introduction Welded Fabric 1.0 Introduction Welded fabric, often referred to as mesh, is a machine welded grid arrangement of reinforcing bars or wires. It is covered by British Standard BS4483. This was revised in

More information

JIS G3445 Carbon steel tubes for machine structural purposes

JIS G3445 Carbon steel tubes for machine structural purposes JIS G3445 arbon steel tubes for machine structural purposes 1. Scope This Japanese Industrial Standard specifies the carbon steel tubes, hereinafter referred to as the "tubes", used for machinery, automobiles,

More information

Caps STANDARD WEIGHT Inches / Pounds

Caps STANDARD WEIGHT Inches / Pounds Standard Caps you are here: Home > Weldbend Catalog > Fittings > Caps Caps STANDARD WEIGHT Inches / Pounds For Metric Units >Click Here Nominal Pipe Size Outside Inside Wall Thickness (T) Length (E) Pipe

More information

It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool

It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool H Craft Print Project No. 272 ERE'S a metal bender that will enable you to bend

More information

SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS

SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS PART 1 GENERAL 1.01 SECTION INCLUDES A. The requirements for pipe material and installation in sewer and drainage collection systems. All materials

More information

Profiles in stock Standard catalogue. Discover the possibilities with aluminium profiles from Sapa

Profiles in stock Standard catalogue. Discover the possibilities with aluminium profiles from Sapa Profiles in stock Standard catalogue Discover the possibilities with aluminium from Sapa You can create your own profile or you can choose from a wide selection of standard. Delivery: 1 2 weeks for standard

More information

LIFTING SYSTEMS RR, RRPr, PLA, PNLF

LIFTING SYSTEMS RR, RRPr, PLA, PNLF LIFTING SYSTEMS RR, RRPr, PLA, PNLF Replaces the brochure 11/2006 3/2007 Benefits of Peikko lifting systems RR Wide model range Is installed to the surface of the mould, the mould remains solid RRPr Fully

More information

SECTION 02824 EXPANDED METAL MESH FENCE

SECTION 02824 EXPANDED METAL MESH FENCE SECTION 02824 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for expanded metal mesh fence on the right-of-way. 1.02 REFERENCE STANDARDS A. ASTM International (ASTM): 1.03 SUBMITTALS

More information

ASTM A860/A860M-09 Standard Specification for Wrought High Strength. Ferritic Steel Butt Welding Fittings. 1. Scope :- 2. Reference Documents :-

ASTM A860/A860M-09 Standard Specification for Wrought High Strength. Ferritic Steel Butt Welding Fittings. 1. Scope :- 2. Reference Documents :- Standard Specification for Wrought High Strength Ferritic Steel Butt Welding Fittings 1. Scope :- 1.1 This specification covers wrought high strength ferritic steel butt-welding fitting of seamless and

More information

B.TECH. (AEROSPACE ENGINEERING) PROGRAMME (BTAE) Term-End Examination December, 2011 BAS-010 : MACHINE DESIGN

B.TECH. (AEROSPACE ENGINEERING) PROGRAMME (BTAE) Term-End Examination December, 2011 BAS-010 : MACHINE DESIGN No. of Printed Pages : 7 BAS-01.0 B.TECH. (AEROSPACE ENGINEERING) PROGRAMME (BTAE) CV CA CV C:) O Term-End Examination December, 2011 BAS-010 : MACHINE DESIGN Time : 3 hours Maximum Marks : 70 Note : (1)

More information

SECTION 15140 - PIPE HANGERS AND SUPPORTS

SECTION 15140 - PIPE HANGERS AND SUPPORTS Part I - GENERAL 1.01 SECTION INCLUDES A. The work covered under this section consists of the furnishing of all necessary labor, supervision, materials, equipment, and services to completely execute the

More information

W-22 STAINLESS STEEL PIPES

W-22 STAINLESS STEEL PIPES Guideline No.: W-22(201510) W-22 STAINLESS STEEL PIPES Issued date: October 20,2015 China Classification Society Foreword: This Guide is a part of CCS Rules, which contains technical requirements, inspection

More information

60.12. Depend-O-Lok FxE Expansion Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date. DEPEND-O-LOK FxE EXPANSION COUPLING

60.12. Depend-O-Lok FxE Expansion Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date. DEPEND-O-LOK FxE EXPANSION COUPLING 60.1 D-O-L FxE expansion couplings are a bolted, split-sleeve design that provides for expansion and contraction at the coupled joint. These couplings are furnished with restraint rings that, when affixed

More information

Anodes and Misc Equipment

Anodes and Misc Equipment Anodes and Misc Equipment Application: Platinised Titanium Anodes Platinised titanium anodes are recommended for use in the following electrolytic processes:- Precious metal electroplating - e.g. Au, Pt,

More information

NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE

NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE B4 NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE AVAILABLE IN CARBON AND STAINLESS STEEL 23 THEORY

More information

Wear-resistant steels. Technical terms of delivery for heavy plates. voestalpine Grobblech GmbH www.voestalpine.com/grobblech

Wear-resistant steels. Technical terms of delivery for heavy plates. voestalpine Grobblech GmbH www.voestalpine.com/grobblech Wear-resistant steels Technical terms of delivery for heavy plates voestalpine Grobblech GmbH www.voestalpine.com/grobblech Wear-resistant steels durostat durostat 400 durostat 450 durostat 500 durostat

More information

Valu Guide Sheaths. Valu Guide Inserts. Optional Valu Guide Inserts. Typical Properties of Valu Guide Rail. and Hardware.

Valu Guide Sheaths. Valu Guide Inserts. Optional Valu Guide Inserts. Typical Properties of Valu Guide Rail. and Hardware. 14 gauge stainless steel The Original, Long Life Sanitary Guide Rail Valu Guide rail incorporates two outstanding materials: stainless steel and UHMW. The 14 ga. stainless steel sheath provides rigid streamlined

More information

A World Class Manufacturer of Induction Bends

A World Class Manufacturer of Induction Bends A World Class Manufacturer of Induction Bends COFELY FABRICOM BENDING A leading position in bending High Flexibility and Close Tolerances As a world leading manufacturer of pipe bends, produced by induction

More information

Corner Soldier Corner Soldier

Corner Soldier Corner Soldier Wall Formwork Corner Soldier Corner Soldier Designed to be used in congunction with standard soldiers, they simplify the construction of corners. By allowing ties to pass through in both direction, each

More information

North American Stainless Long Products

North American Stainless Long Products North American Stainless Long Products 1 North American Stainless North American Stainless is part of the most competitive stainless steel manufacturing group in the world, Acerinox, S.A. The development

More information

Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors

Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical

More information

JIS G3461 Carbon Steel Tubes for Boiler and Heat Exchanger

JIS G3461 Carbon Steel Tubes for Boiler and Heat Exchanger JIS G3461 Carbon Steel Tubes for Boiler and Heat Exchanger 1. Scope This Japanese Industrial Standard specifies the carbon steel tubes, hereinafter referred to as the "tubes", used for exchanging heat

More information

DIN 17172-78 STEEL PIPES FOR PIPE LINES FOR THE TRANSPORT OF COMBUSTIBLE FLUIDS AND GASES

DIN 17172-78 STEEL PIPES FOR PIPE LINES FOR THE TRANSPORT OF COMBUSTIBLE FLUIDS AND GASES DIN 17172-78 STEEL PIPES FOR PIPE LINES FOR THE TRANSPORT OF COMBUSTIBLE FLUIDS AND GASES For connection with the International Draft Standards 3183 and 3845 published by the International Organization

More information

LEGACY REPORT ER-5110. www.icc-es.org. ICC Evaluation Service, Inc. Reissued November 1, 2003. Legacy report on the 1997 Uniform Building Code

LEGACY REPORT ER-5110. www.icc-es.org. ICC Evaluation Service, Inc. Reissued November 1, 2003. Legacy report on the 1997 Uniform Building Code LEGACY REPORT Reissued November 1, 2003 ICC Evaluation Service, Inc. www.icc-es.org Business/Regional Office # 5360 Workman Mill Road, Whittier, California 90601 # (562) 699-0543 Regional Office # 900

More information

SECTION 4: Cable Ladder Stainless Steel & Aluminium

SECTION 4: Cable Ladder Stainless Steel & Aluminium SECTION 4: Cable Ladder & Aluminium Type 3/50 (NEMA 6A) Type 4/70L Type 5/112 (NEMA 20C) > 4:3 > 4:4 > 4:5 Aluminium Type 4/70A (NEMA 16B) Ladder Splice Plates > 4:7 > 3:18 Page 4:1 Cable Ladder General

More information

METHOD OF STATEMENT FOR STATIC LOADING TEST

METHOD OF STATEMENT FOR STATIC LOADING TEST Compression Test, METHOD OF STATEMENT FOR STATIC LOADING TEST Tension Test and Lateral Test According to the American Standards ASTM D1143 07, ASTM D3689 07, ASTM D3966 07 and Euro Codes EC7 Table of Contents

More information

UGVCL/SP/591/11KV HT AB CABLE

UGVCL/SP/591/11KV HT AB CABLE TECHNICAL SPECIFICATION FOR 11KV AERIAL BUNCHED CABLES FOR OVERHEAD LINES (CROSSED LINKED POLYTHENE DRY GAS CURED) 1. SCOPE This specification covers requirements of XLPE insulated, 11 KV Aerial Bunched

More information

Wire Fabric and Reinforcement

Wire Fabric and Reinforcement Wire Fabric and Reinforcement Under the state specification for 709.08 for concrete reinforcement, ASTM A 82 is called out. Under the state specification 709.10 for concrete reinforcement, ASTM A 185 is

More information

SECTION 32 31 13 CHAIN LINK FENCES AND GATES

SECTION 32 31 13 CHAIN LINK FENCES AND GATES SECTION 32 31 13 CHAIN LINK FENCES AND GATES PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Fence framework, fabric, and accessories. 2. Excavation for post bases. 3. Concrete foundation for posts

More information

High-strength and ultrahigh-strength. Cut sheet from hot-rolled steel strip and heavy plate. voestalpine Steel Division www.voestalpine.

High-strength and ultrahigh-strength. Cut sheet from hot-rolled steel strip and heavy plate. voestalpine Steel Division www.voestalpine. High-strength and ultrahigh-strength TM steels Cut sheet from hot-rolled steel strip and heavy plate Josef Elmer, Key account manager voestalpine Steel Division www.voestalpine.com/steel Weight savings

More information

Specification for Rotary Drill Stem Elements

Specification for Rotary Drill Stem Elements Addendum 1 March 2007 Effective Date: September 1, 2007 Specification for Rotary Drill Stem Elements ANSI/API SPECIFICATION 7-1 FIRST EDITION, MARCH 2006 EFFECTIVE DATE: SEPTEMBER 2006 ISO 10424-1:2004

More information

Conduit Fittings & Accessories Directional Drilling Conduit Utility Duct Telephone Duct Residential Boxes

Conduit Fittings & Accessories Directional Drilling Conduit Utility Duct Telephone Duct Residential Boxes CANTEX INC. 301 Commerce Ste 2700 Fort Worth, Texas 76102 817-215-7000 Fax: 817-215-7001 Conduit Fittings & Accessories Directional Drilling Conduit Utility Duct Telephone Duct Residential Boxes YOUR FULL

More information

Metal Pressfitting Pipe Systems

Metal Pressfitting Pipe Systems VdS Guidelines for water extinguishing systems VdS 2100-26-3en Requirements and test methods Part 3: Additional provisions for Pipe Systems made of galvanized steel VdS 2100-26-3en : 2012-04 (01) Publishing

More information

The Manitoba Water Services Board SECTION 027110 Standard Construction Specifications September 2013 Page 1 of 12

The Manitoba Water Services Board SECTION 027110 Standard Construction Specifications September 2013 Page 1 of 12 September 2013 Page 1 of 12 Part 1 General 1.1 DESCRIPTION OF WORK.1 The work shall consist of the supply and construction of a chain link fence, barb wire fences or mesh fences as shown on the Plans or

More information

For New Technology Network. Steel Manufacturing Machinery Product Guide Book

For New Technology Network. Steel Manufacturing Machinery Product Guide Book For New Technology Network R Steel Manufacturing Machinery Product Guide Book Ecological / Economical proposals from NTN NTN products exhibit benefits at various locations. Steel manufacturing equipment

More information

AISI O1 Cold work tool steel

AISI O1 Cold work tool steel T OOL STEEL FACTS AISI O1 Cold work tool steel Great Tooling Starts Here! This information is based on our present state of knowledge and is intended to provide general notes on our products and their

More information

TECHNICAL SPECIFICATION

TECHNICAL SPECIFICATION THOMAS - G-FLEX GFLEX TECH SPEC CONNECTING INNOVATION JOHANNESBURG TEL: +27 11 794 7594 CAPE TOWN TEL: +27 21 556 5258 POLOKWANE TEL: 015 298 9142 DESIGNER, MANUFACTURER AND DISTRIBUTOR OF PIPE CONNECTION,

More information

CALCULATION & DRAFTING STANDARDS MANUAL PROCEDURE: C&D 515 Bill of Materials Standard REV 0.0 5/6/04

CALCULATION & DRAFTING STANDARDS MANUAL PROCEDURE: C&D 515 Bill of Materials Standard REV 0.0 5/6/04 BROWN MINNEAPOLIS TANK PAGE 1 OF 7 PURPOSE: Create and Drawing Uniformity Create, explain, and establish a standard bill of materials to be placed on every drawing (except the overall tank elevation and

More information

Tariff General Cargo. Tariff 2013. DB Port Szczecin Sp. z o.o. Bytomska14_Str. 70 603 Szczecin, Poland. This Tariff includes: rates for services,

Tariff General Cargo. Tariff 2013. DB Port Szczecin Sp. z o.o. Bytomska14_Str. 70 603 Szczecin, Poland. This Tariff includes: rates for services, Tariff General This Tariff includes: rates for services, valid at DB Port Szczecin 01.01.2013 do 31.12.2013. DB Port Szczecin Sp. z o.o. Bytomska14_Str. 70 603 Szczecin, Poland 1 Table of contents: 1.

More information

TECHNICAL SPECIFICATIONS FOR BARE LINEPIPE FOR FIREWATER SERVICE

TECHNICAL SPECIFICATIONS FOR BARE LINEPIPE FOR FIREWATER SERVICE TECHNICAL SPECIFICATIONS FOR BARE LINEPIPE FOR FIREWATER SERVICE A) IS: 3589 GRADE FE 330 This tender specification establishes the minimum requirements for the manufacture of IS: 3589 Grade Fe330 Bare

More information

1 Barlines Rebar Detailing Standards in the Philippines

1 Barlines Rebar Detailing Standards in the Philippines Barlines Rebar Detailing Standards in the Philippines METRIC (SI), STANDARD HOOKS AND OTHER DETAILING CRITERIAS By Amadeus (Mady) Magpile, President and CEO INTRODUCTION This is first in a series of articles

More information

Alternative Steel Materials to BS 5950

Alternative Steel Materials to BS 5950 BC 1: 2008 Design Guide on Use of Alternative Steel Materials to BS 5950 BCA Sustainable Construction Series 3 The education and research arm of the Building and Construction Authority 200 Braddell Road

More information

Chapter 73 Articles of iron or steel

Chapter 73 Articles of iron or steel Notes. Chapter 73 Articles of iron or steel 1.- In this Chapter the expression cast iron applies to products obtained by casting in which iron predominates by weight over each of the other elements and

More information

Module 2 GEARS. Lecture 3 - INVOLUTE SPUR GEARS

Module 2 GEARS. Lecture 3 - INVOLUTE SPUR GEARS Module 2 GEARS Lecture 3 - INVOLUTE SPUR GEARS Contents 3.1 Introduction 3.2 Standard tooth systems for spur gears 3.3 Profile shifted gears 3.4 Involutometry 3.5 Design of gear blanks 3.1 INTRODUCTION

More information

Introduction. ε 1 θ=55 ε 2. Localized necking Because ν=0.5 in plasticity, ε 1 =-2ε 2 =-2ε 3. ε 3,ε 2

Introduction. ε 1 θ=55 ε 2. Localized necking Because ν=0.5 in plasticity, ε 1 =-2ε 2 =-2ε 3. ε 3,ε 2 SHEET METALWORKING 1. Cutting Operation 2. Bending Operation 3. Drawing 4. Other Sheet-metal Forming 5. Dies and Presses 6. Sheet-metal Operation 7. Bending of Tube Stock 1 Introduction Cutting and forming

More information

Part 1. Dimensions and Properties. Load and Resistance Factor Design, 3 rd Editioni. Most widely used section. Two flanges held apart by a web

Part 1. Dimensions and Properties. Load and Resistance Factor Design, 3 rd Editioni. Most widely used section. Two flanges held apart by a web Manual of Steel Construction Load and Resistance Factor Design, 3 rd Editioni Part 1 Dimensions and Properties C. C. Fu, Ph.D., P.E. University of Maryland at College Park 1 Wide-flange (W) Shapes Most

More information

Device description. DDSB Drum brake. Utilisation on at least one vehicle axle.

Device description. DDSB Drum brake. Utilisation on at least one vehicle axle. Tristop Cylinder 925... DDSB Drum brake DDSB Disc brakes Drum brake Disc brakes Application Purpose Utilisation on at least one vehicle axle. Combined spring brake - diaphragm brake chambers (Tristop Cylinders)

More information

TIE DOWNS CARGO CONTROL

TIE DOWNS CARGO CONTROL 138 620 Spicer St., Akron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900 620 Spicer St., Akron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900 139 140 620

More information

I BEAM TRACK INSTALLATION

I BEAM TRACK INSTALLATION PDQ 0/700 FESTOON SYSTEM INSTALLATION AND MAINTENANCE INSTRUCTIONS INTRODUCTION The PDQ Festoon System was designed to run on one of three sizes of I-beams: S x., S8 x 8. and S x.. System trolleys must

More information

KIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices

KIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices 04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust

More information

Valve Steel. Valve Steel

Valve Steel. Valve Steel Valve Steel Valve Steel BÖHLER-UDDEHOLM Precision Strip AB is one of the world s leading manufacturers of high quality strip steel. More than a century s experience of cold rolling has given us a unique

More information

Machine devices, jig devices

Machine devices, jig devices Machine devices, jig devices 853 K0697 Rolled thread studs DIN 6379 Material: Tempered steel. KIPP Rolled thread studs DIN 6379 Order No. D L B1 B2 Approx. weight g Surface finish: Thread rolled. Class

More information

Seamless stainless tubes for hydraulic and instrumentation systems

Seamless stainless tubes for hydraulic and instrumentation systems Seamless stainless tubes for hydraulic and instrumentation systems stock assortment integrated production technical knowledge network of sales and service Reduce your lifecycle costs When selecting tubes

More information

[BARLINES MANUAL OF STANDARD PRACTICE (PHILS)] Chapter One METRIC (SI), PNS BAR SIZES STANDARDS AND OTHER CRITERION

[BARLINES MANUAL OF STANDARD PRACTICE (PHILS)] Chapter One METRIC (SI), PNS BAR SIZES STANDARDS AND OTHER CRITERION Chapter One METRIC (SI), PNS BAR SIZES STANDARDS AND OTHER CRITERION By Amadeus (Mady) Magpile, President and CEO INTRODUCTION This is first in a series of articles outlining the Manual of Standard Practice,

More information

PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification. 96 B. Riutta

PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification. 96 B. Riutta PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification Number: 3503-11.2.610 Rev. 2 Rubber Lined Steel Pipe and Fittings Mechanically Coupled Plain End Type System Issued Revised Approved

More information

TECHNICAL SPECIFICATION SERIES 8000 PRECAST CONCRETE

TECHNICAL SPECIFICATION SERIES 8000 PRECAST CONCRETE TECHNICAL SPECIFICATION SERIES 8000 PRECAST CONCRETE TECHNICAL SPECIFICATION PART 8000 - PRECAST CONCRETE TABLE OF CONTENTS Item Number Page 8100 PRECAST CONCRETE CONSTRUCTION - GENERAL 8-3 8101 General

More information

Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe 1

Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe 1 Designation: A 9 96 (Reapproved 200) Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe This standard is issued under the fixed designation A 9; the number immediately following

More information

Africa s leading steel supplier CATALOGUE TUBE & PIPE. The Macsteel Group - Africa s leading steel supplier - www.macsteel.co.za

Africa s leading steel supplier CATALOGUE TUBE & PIPE. The Macsteel Group - Africa s leading steel supplier - www.macsteel.co.za Africa s leading steel supplier CATALOGUE TUBE & PIPE - www.macsteel.co.za TUBE & PIPE CONTENTS 1. Contents 13. Conveyance SANS 1182 - Light Page 7 2. Contact Details 14. Conveyance SANS 719 - Large Bore

More information

Standard Specification for Tool Steel High Speed 1

Standard Specification for Tool Steel High Speed 1 Designation: A 600 92a (Reapproved 2004) Standard Specification for Tool Steel High Speed This standard is issued under the fixed designation A 600; the number immediately following the designation indicates

More information

ENGINEERING SPECIFICATION PULTRUDED DYNARAIL FIBERGLASS LADDER & LADDER CAGES

ENGINEERING SPECIFICATION PULTRUDED DYNARAIL FIBERGLASS LADDER & LADDER CAGES ENGINEERING SPECIFICATION PULTRUDED DYNARAIL FIBERGLASS LADDER & LADDER CAGES PART 1 - GENERAL 1.1 SCOPE OF WORK SECTION 06610 FIBERGLASS REINFORCED PLASTICS (FRP) FABRICATIONS PULTRUDED SQUARE TUBE LADDER

More information

Naue GmbH&Co.KG. Quality Control and. Quality Assurance. Manual. For Geomembranes

Naue GmbH&Co.KG. Quality Control and. Quality Assurance. Manual. For Geomembranes Naue GmbH&Co.KG Quality Control and Quality Assurance Manual For Geomembranes July 2004 V.O TABLE OF CONTENTS 1. Introduction 2. Quality Assurance and Control 2.1 General 2.2 Quality management acc. to

More information

Engineering Your Competitive Edge. Applications of Kennametal mill rolls

Engineering Your Competitive Edge. Applications of Kennametal mill rolls Engineering Your Competitive Edge of Kennametal mill rolls Tungsten carbide is a proven material for many stands in the rolling mill industry. Tungsten carbide grades developed by KENNAMETAL EPG achieve

More information

ALLOY 2205 DATA SHEET

ALLOY 2205 DATA SHEET ALLOY 2205 DATA SHEET UNS S32205, EN 1.4462 / UNS S31803 GENERAL PROPERTIES ////////////////////////////////////////////////////// //// 2205 (UNS designations S32205 / S31803) is a 22 % chromium, 3 % molybdenum,

More information

After reading this lesson you will be able to: 12.3 IMPORTANCE OF ROOF 12.4 TYPES OF ROOF IN A HOUSE

After reading this lesson you will be able to: 12.3 IMPORTANCE OF ROOF 12.4 TYPES OF ROOF IN A HOUSE 86 :: Certificate in Construction Supervision (CIVIL) 12 ROOF 12.1 INTRODUCTION The structure provided to cover the house surface (floor) is known as roof. For different situation and requirement, it is

More information

Wires and Strands for Prestressed Concrete

Wires and Strands for Prestressed Concrete Wires and Strands for Prestressed Concrete Raw Materials Manufacturing Process Wires 1 Wires and Strands for Prestressed Concrete 1.1 Wires EMCOCABLES manufactures a wide variety of wires with a high

More information

Supplementary Technical Document for Senior Welding Engineer Certification. I. Determination of Necessary Preheat Temperature.

Supplementary Technical Document for Senior Welding Engineer Certification. I. Determination of Necessary Preheat Temperature. Supplementary Technical Document for Senior Welding Engineer Certification I. Determination of Necessary Preheat Temperature July 2009 THE JAPAN WELDING ENGINEERING SOCIETY 1. Welding heat input Heat supplied

More information

Embedded Parts Introduction - Anchors

Embedded Parts Introduction - Anchors In the plant construction or process plants such as chemical, petrochemical, gas or power plants various disciplines are brought into contact and built on each other. Civil, mechanical, electro technical

More information

Sheet metal operations - Bending and related processes

Sheet metal operations - Bending and related processes Sheet metal operations - Bending and related processes R. Chandramouli Associate Dean-Research SASTRA University, Thanjavur-613 401 Table of Contents 1.Quiz-Key... Error! Bookmark not defined. 1.Bending

More information

Module 2- GEARS. Lecture 8 SPUR GEAR DESIGN

Module 2- GEARS. Lecture 8 SPUR GEAR DESIGN Module 2- GEARS Lecture 8 SPUR GEAR DESIGN Contents 8.1 Surface durability basic concepts 8.2 Surface failures 8.3 Buckingham contact stress equation 8.4 Contact stress AGMA procedure 8.5 Surface fatigue

More information

UNIVERSAL RAILING, STEEL

UNIVERSAL RAILING, STEEL RAILINGS Page Universal Railing, steel 108-109 Large Module Railing, steel 110-111 Allround Railing, aluminium 112-113 Module Railing, aluminium 114-115 Standard Type Railing, aluminium 116-117 107 UNIVERSAL

More information

Vario-Series Accessories

Vario-Series Accessories Accessories and spare parts for GMW analogue panel meters and controllers Current Transformers pages 2-9 Shunt Resistors 10-11 Voltage Dividers 12 Power supply for indicator/controllers 13 Blanking Plates

More information

HIGH PERFORMANCE PRE-APPLIED SYSTEM FOR BLIND SIDE & BELOW GRADE WATERPROOFING APPLICATIONS

HIGH PERFORMANCE PRE-APPLIED SYSTEM FOR BLIND SIDE & BELOW GRADE WATERPROOFING APPLICATIONS BSW HIGH PERFORMANCE PRE-APPLIED SYSTEM FOR BLIND SIDE & BELOW GRADE WATERPROOFING APPLICATIONS BSW is a fully reinforced Pre-Applied system membrane designed for horizontal and vertical external blind-side

More information

THERMA-TUBE preinsulated pipes and fittings Catalogue of products

THERMA-TUBE preinsulated pipes and fittings Catalogue of products THERMA-TUBE preinsulated pipes and fittings Catalogue of products THERMA TUBE preinsulated pipes and fittings TABLE OF CONTENTS 1. GENERAL INFORMATION ABOUT THE USE OF PREINSULATED PIPES AND FITTINGS...

More information

Standard Cr-Ni-Mo Stainless Steels

Standard Cr-Ni-Mo Stainless Steels Standard Cr-Ni-Mo Stainless Steels Steel grades Outokumpu EN ASTM 441 1.441 316 444 1.444 316L 4436 1.4436 316 4432 1.4432 316L 446 1.446 316LN 4429 1.4429 S31653 4571 1.4571 316Ti 4435 1.4435 316L Characteristic

More information

1. Division-5 Section Metal Fabrications for material and welding requirements related to wrought iron fencing.

1. Division-5 Section Metal Fabrications for material and welding requirements related to wrought iron fencing. SECTION 02835 SITE FENCES AND GATES PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 1 Specification Sections,

More information

PAAM COMMERCIAL PRIVATE LIMITED

PAAM COMMERCIAL PRIVATE LIMITED METAL PACKAGING We at Paam Group have been providing vast range of packaging products to our customers based on their preferences, needs and specifications. We provide all the materials required in metal

More information

Pressure Vessel Components. Massive Capacities. Innovative Technologies.

Pressure Vessel Components. Massive Capacities. Innovative Technologies. Pressure Vessel Components Massive Capacities. Innovative Technologies. Our Vision Edmonton Exchanger s vision is to consistently meet and exceed the expectations of our customers by providing top quality,

More information

STRUCTURAL CONCEPT FOR LIGHT GAUGE STEEL FRAME SYSTEM

STRUCTURAL CONCEPT FOR LIGHT GAUGE STEEL FRAME SYSTEM Chapter 9 STRUCTURAL CONCEPT FOR LIGHT GAUGE STEEL FRAME SYSTEM 9.1 BACKGROUND Steel is widely used in the construction of multi-storey buildings. However, steel construction is seldom used and is traditionally

More information