5.24 (0.208) SNUBBER 4.50 (0.177) INPUT GORDOS SOLID STATE RELAY (3.453) OUTPUT 5.00 (0.197) SNUBBER NETWORK OUTPUT (0.
|
|
|
- Marilyn Long
- 7 years ago
- Views:
Transcription
1 .5mm DIN-RAIL SSR FEATRES: DIN-Rail or panel mount. Compact Size. LED indicator. AC or DC control. Zero AC turn-on models. and 5 Amp Outputs L, cl Recognized (5 Amp Model: L Rating 0 Amps) Amp.5 0 VAC 0 Amp.5 0 VAC CE Compliant Per EN60950 L E798 EQIVALENT CIRCIT DIMENSIONS: inches (mm) CRRENT 5. (0.08).50 (0.77) INPT.50 (0.886) 5.5 (0.0) + - CRRENT AC INPT.5mm ZERO TRN-ON NETWORK (.5) 5.00 (0.97) + GORDOS 800 SOLID STATE RELAY OTPT - OTPT (.50) 9.00 (0.5) (.85) 6.80 [0.68] 0.80 [.07] DC INPT.5mm ZERO TRN-ON.5 (0.).50 (0.77).85 [.75] / Order/Technical Support Tel: (800) / FAX: (800) /
2 .5mm DIN-RAIL SSR INPT SPECIFICATIONS: Model Number nits Control Voltage - VDC 90-0 VAC VAC - VDC Drop Out Voltage.0 VDC 0 VAC 0 VAC.0 VDC Maximum Input Current () 6 6 ma Maximum Turn-On Time ms Maximum Turn-Off Time ms Type Zero Crossing Zero Crossing Zero Crossing Random Turn-on Wire Size OTPT SPECIFICATIONS: Model Number nits Line Voltage Vms Peak Off-State Voltage () Vpeak Maximum Off-State Leakage ()...5 marms Static Off-State dv/dt () V/ Sec Minimum On-State Current marms Maximum On-State Current (5) 0 5 Arms Maximum -Cycle Surge (6) Apeak Maximum -Second Surge (7) Apeak Peak On-State Voltage Drop (8) Vpeak l t (60 Hz, Half-Cycle) A sec Output Type TRIAC ALTERNISTOR B/B SCR Wire Size GENERAL SPECIFICATIONS: All Devices Operating Temperature Range -0 to 80 C Storage Temperature Range -0 to 00 C Input to Output Isolation Voltage (9) 000 Vrms Input/Output to Ground Isolation Voltage (9) 500 Vrms Capacitance (Input to Output) 8 pf Line Frequency Range 7 to 6 Hz Notes: () At maximum input voltage. Input is regulated and current limited. () Do not apply continuously for over minute. () At maximum line voltage, Ta = 5 C. () Minimum dv/dt per EIA/NARM R5, method RS97, 5 C. (5) Mounted in vertical position on DIN-Rail. Free Air. (6) Non-repetitive 60 Hz, resistive load, Ta = 5 C. (7) Non-repetitive 50 or 60 Hz, resistive load, Ta = 5 C. (8) At maximum rated current. (9) Limited to ma for second, Ta = 5 C. Order/Technical Support Tel: (800) / FAX: (800) / /
3 5mm DIN-RAIL SSR FEATRES: DIN-Rail or Panel Mount. Compact Size. LED Indicator. AC or DC Control. Zero AC or Random turn-on models. 5 and 5 Amp Outputs. kv Optical Isolation. CE Compliant Per EN60950 L, cl Recognized E (.77) 5.70 (.06).0 (0.6).0 (0.80) CRRENT GORDOS AC 5mm THREE PHASE AC INPT EQIVALENT CIRCIT (.5) 5.00 (0.97) 80 SOLID STATE RELAY OTPT 5 AMPS 8 TO 50 VAC INPT - VDC (0.66) (.50) 9.00 (0.5) (.858) CRRENT 0.80 [.07] 6.80 [0.68] DC 5mm THREE PHASE RANDOM DC INPT EQIVALENT CIRCIT Order/Technical Support Tel: (800) / FAX: (800) / /
4 INPT SPECIFICATIONS: Model Number nits Control Voltage - VDC - VDC VAC Drop Out Voltage.0 VDC.0 VDC 0 VAC Maximum Input Current () ma Maximum Turn-On Time ms Maximum Turn-Off Time ms Type Zero Crossing Random Turn-on Zero Crossing Wire Size OTPT SPECIFICATIONS: Model Number nits Line Voltage Vrms Peak Off-State Voltage () Vpeak Maximum Off-State Leakage ().5.5 marms Static Off-State dv/dt () V/ Sec Minimum On-State Current marms Maximum On-State Current (5) 5 5 Arms Maximum -Cycle Surge (6) Apeak Maximum -Second Surge (7) 5 5 Apeak Peak On-State Voltage Drop (8).6.6 Vpeak I t (60Hz, Half-Cycle) A sec Wire Size GENERAL SPECIFICATIONS: All Devices Operating Temperature Range -0 to 80 C Storage Temperature Range -0 to 00 C Input to Output Isolation Voltage (9) 000 Vrms I/O to Ground Isolation Voltage (9) 500 Vrms Capacitance (Input to Output) 8 pf Line Frequency Range 7 to 6 Hz Notes: () At maximum input voltage. Input is regulated and current limited. () Do not apply continuously for over minute. () At maximum line voltage, Ta = 5 C. () Minimum dv/dt per EIA/NARM R5, method RS97, 5 C. (5) Mounted in vertical position on DIN-Rail. Free Air. (6) Non-repetitive 60 Hz, resistive load, Ta = 5 C. (7) Non-repetitive 50 or 60 Hz, resistive load, Ta = 5 C. (8) At maximum rated current. (9) Limited to ma for second, Ta = 5 C. Order/Technical Support Tel: (800) / FAX: (800) / /5
5 90mm and PHASE DIN-RAIL SSR FEATRES: DIN-Rail or panel mount. Compact Size. LED indicator. AC or DC control. Zero AC or random turn-on models. kv optical isolation. L, cl Recognized (File E798) CE Compliant Per EN (.5) (.77).50 (0.77) (.87) R/L S/L T/L GORDOS GRD 800 SOLID STATE RELAY OTPT: 5 0 AMPS VAC (.87) (.858) 97.0 (.87) /T V/T V/T (0.66) A A DIMENSIONS: inches (mm) TOLERANCE: ±0.0 (±0.008) A CRRENT LED /T A A CRRENT LED PHASE 90mm DC INPT ZERO CROSSING OR RANDOM PHASE 90mm DC INPT /T R/L V/T /T S/L W/T T/L A INPT PHASE 90mm AC INPT ZERO CROSSING PHASE 90mm AC INPT ZERO CROSSING R/L V/T OTPT S/L W/T T/L NOTE: V/T to S/L is shorted on phase models. /6 Order/Technical Support Tel: (800) / FAX: (800) /
6 90mm and PHASE DIN-RAIL SSR INPT SPECIFICATIONS: Model Number nits Control Voltage - VDC - VDC VAC Drop Out Voltage.0 VDC.0 VDC 0 VAC Maximum Input Current () 6 ma Maximum Turn-On Time ms Maximum Turn-Off Time ms Type Zero Crossing Random Turn-on Zero Crossing OTPT SPECIFICATIONS: Three Phase Two Phase Model Number nits Line Voltage Vrms Peak Off-State Voltage () Vpeak Maximum Off-State Leakage ().5.5 marms Static Off-State dv/dt () V/ Sec Minimum On-State Current marms Maximum On-State Current per phase (5) 0 5 Arms Maximum -Cycle Surge (6) Apeak Maximum -Second Surge (7) 5 5 Apeak Peak On-State Voltage Drop (8).6.6 Vpeak l t (60 Hz, Half-Cycle) A sec GENERAL SPECIFICATIONS: All Devices Operating Temperature Range -0 to 80 C Storage Temperature Range -0 to 00 C Input to Output Isolation Voltage (9) 000 Vrms Input/Output to ground Isolation Voltage (9) 000 Vrms Capacitance (Input to Output) 8 pf Line Frequency Range 7 to 6 Hz Notes: () At maximum input voltage. Input is regulated and current limited. () Do not apply continuously for over minute. () At maximum line voltage, Ta = 5 C. () Minimum dv/dt per EIA/NARM R5, method RS97, 5 C. (5) Mounted in vertical position on DIN-Rail. Free Air. Derated by 7. ma/ C to 80 C. (6) Non-repetitive 60 Hz, resistive load, Ta = 5 C. (7) Non-repetitive 50 or 60 Hz, resistive load, Ta = 5 C. (8) At maximum rated current. (9) Limited to ma for second, Ta = 5 C. Order/Technical Support Tel: (800) / FAX: (800) / /7
Solid State Relays Industrial, 1-Phase ZS w. LED Types RS 23, RS 40, RS 48
Solid State Relays Industrial, 1-Phase ZS w. LED Types RS 23, RS 0, RS 8 Zero switching AC Solid State Relay Direct copper bonding (DCB) technology in 25A and 0A types LED indication Clip-on IP 20 protection
S112-XHS. Description. Features. Agency Approvals. Applications. Absolute Maximum Ratings. Schematic Diagram. Ordering Information
Description Features The S112-X is a bi-directional, single-pole, single-throw, normally open multipurpose solid-state relay. The circuit is composed of one input IR LED with a series limiting resistor
Schematic Mechanical Drawing Derating Curve. Input. Output. Product Catalogue
Input 1 Product Catalogue Single Phase SSR (24VAC) 1 ~ 4 Amps : DC Control, : Triac output 42.5 Series : 1 J/K 3 Input (+) & 4 Input (-) 1 & 2 35.6 25.5 57.75 28. 45. A = 3.2 C/W B = 1. C/W C & D =.5 C/W
MAXIMUM LOAD CURRENT 1 A SN SERIES
SOLID STATE RELAY (I/O Module) MAXIMUM LOAD CURRENT 1 A SN SERIES RoHS compliant FEATURES I/O modules for interface between CPU and external input devices or loads Ultra slim and light weight, SIL s type
ACTP250J1BJ AC Transient Protector
*RoHS COMPLIANT ACTP250J1BJ BIDIRECTIONAL THYRISTOR OVERVOLTAGE PROTECTORS ACTP250J1BJ AC Transient Protector Designed to withstand a 2.5 kv (1.2/50 voltage, 8/20 current) combination wave surge per IEC
Solid-State Relays. Series Included. Solid-State Relays SIR...145 SLR...146 NLF...147. PHS Series PHS...148
Solid-State Relays Included SIR....145 SLR....146 NLF....147 PHS PHS....148 Solid-State Relays 144 www.ssac.com 800-843-8848 fax: 605-348-5685 Solid-State Relay - Isolated SIR1 & SIR2 Designed for industrial
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical Relays
S101D01/S101D02 S201D01/S201D02
S1D1/S1D/S1D1/S1D S1D1/S1D S1D1/S1D 1-Pin DIP Type SSR for Low Power Control Features 1. Compact ( 1-pin dual-in-line package type). RMS ON-state current I T : 1.Arms 3. Built-in zero-cross (S1D, S1D ).
RoHS APPROVAL SHEET. ituner 12V/6.6A SERIES NO. (E17) EA10953A. ( ) Edac Power Electronics (Suzhou) Co., Ltd. 59 No.59, Chang Sheng Road, Sheng Pu,
APPROVAL SHEET CUSTOMER ituner CUSTOMER P/N DESCRIPTION EDAC MODEL 12V/6.6A SERIES NO. (E17) EA10953A DATE 2010-06-22 REVISION 0 APPROVED DESIGN PREPARE RoHS CONCLUSION APPROVED CONDITON CUSTOMER S APP
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 SERIES Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical
Specifications for EM223 24 VDC 4 In/4 Out and EM223 24 VDC 4 In/4 Relay Out
SIMATIC S7-200 EM223 Digital Combination Modules EM223 2 VDC In/ Out and EM223 2 VDC In/ Relay Out Table 1 Specifications for EM223 2 VDC In/ Out and EM223 2 VDC In/ Relay Out EM223 2VDC In/Out 6ES7 2231BF200XA0
Features. Applications. Truth Table. Close
ASSR-8, ASSR-9 and ASSR-8 Form A, Solid State Relay (Photo MOSFET) (0V/0.A/0Ω) Data Sheet Description The ASSR-XX Series consists of an AlGaAs infrared light-emitting diode (LED) input stage optically
1 Form A Solid State Relay
1 Form A Solid State Relay Vishay Semiconductors DIP i1791- SMD DESCRIPTION Vishay solid state relays (SSRs) are miniature, optically coupled relays with high-voltage MOSFET outputs. The LH1518 relays
Series 427. 1/16 DIN Multi-Mode Bar Graph Display Timer TIMERS PRODUCT HIGHLIGHTS
Series 427 1/16 DIN Multi-Mode Bar Graph Display Timer PRODUCT HIGHLIGHTS Digital Setting with 0.1% Accuracy Unique LED Bargraph Indicates Time Cycle in 20% Increments 8 Field Selectable Modes of Operation
The Global Expert in Solid State Relay Technology. ED Series
The Global Expert in Solid State Relay Technology ED Series ABOUT US Crydom, a brand of Technologies (CST) and global expert in Solid State Relay Technology, has a distinguished record of providing high
Y.LIN ELECTRONICS CO.,LTD.
Features Current transfer ratio (CTR 50~600% at I F =5mA, V CE =5V) High isolation voltage between input and output (Viso=5000 V rms ) Creepage distance >7.62 mm Operating temperature up to +110 C Compact
TISP4500H3BJ Overvoltage Protector
*RoHS COMPLINT TISP4500H3BJ BIDIRECTIONL THYRISTOR OVERVOLTGE PROTECTORS TISP4500H3BJ Overvoltage Protector Non-Conductive During K.20/21/45 Power Contact Test - Off-State Voltage... >245 V rms - For Controlled
DS 600. A contact free flux gate based current measurement sensor 600A rms
DS 600 A contact free flux gate based current measurement sensor 600A rms DS 600 is member of the small housing sensor family. The family includes a 200A and a 600A version. 600A rms - 900A peak Maximum
Telephone- and leased line modem for industrial applications TD-36
Telephone- and leased line modem for industrial applications TD-36 Modem for industrial PSTN- and leased line applications The TD-36 is an analogue V.34 PSTN modem as well as an industrial 2-wire leased
38 SERIES. Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A. EMR Electromechanical Relays. Common features. SSR Solid State Relays. 6.
38 Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit 6.2 mm wide EMR - DC, AC or AC/DC
MT..KB SERIES 55 A 90 A 110 A THREE PHASE CONTROLLED BRIDGE. Power Modules. Features. Description. Major Ratings and Characteristics
MT..KB SERIES THREE PHASE CONTROLLED BRIDGE Power Modules Features Package fully compatible with the industry standard INT-A-pak power modules series High thermal conductivity package, electrically insulated
Energy Management Energy Meter Type EM23 DIN
Energy Management Energy Meter Type EM23 DIN Class 1 (kwh) according to EN62053-21 Class B (kwh) according to EN50470-3 Class 2 (kvarh) according to EN62053-23 Accuracy ±0.5 RDG (current/voltage) Energy
80 Series - Modular timers 16 A. Features 80.01 80.11
80 Series - Modular timers 16 A Features 80.11 Multi-function and mono-function timer range - Multi-function & multi-voltage 80.11 - On-delay, multi-voltage 17.5 mm wide Six time scales from 0.1s to 24h
MICROSENS. Central 48 V DC Power Supplies for PoE-Components. Description. Features
Central 48 V DC Power Supplies for PoE-Components MICROSENS Description Active network equipment which is supporting the Power-over-Ethernet functions, typically requires a powerful 48 V DC power supply.
MCR08B, MCR08M. Sensitive Gate Silicon Controlled Rectifiers. Reverse Blocking Thyristors. SCRs 0.8 AMPERES RMS 200 thru 600 VOLTS
MCR8B, MCR8M Sensitive Gate Silicon Controlled Rectifiers Reverse Blocking Thyristors PNPN devices designed for line powered consumer applications such as relay and lamp drivers, small motor controls,
Bulletin 150 Smart Motor Controllers SMC-3 Smart Motor Controller
Overview/Modes of Operation Bulletin 150 Smart Motor Controller The SMC-3 is a compact, simple to use, solid-state motor controller designed to operate 3-phase motors. It features a built-in overload relay
Features. Display. Measurements. Intelligent. Accuracy. Models. Installation DEIF A/S. Multi-instrument 4921210109D
7000/7000C/7020 Multi-instrument 4921210109D Features Measurements All 3-phase AC measurements True RMS Replaces analogue meters Demand on each phase current Accuracy U, I and F class 0.5 Other values
LTC1390 8-Channel Analog Multiplexer with Serial Interface U DESCRIPTIO
FEATRES -Wire Serial Digital Interface Data Retransmission Allows Series Connection with Serial A/D Converters Single V to ±V Supply Operation Analog Inputs May Extend to Supply Rails Low Charge Injection
MasterINTERFACE 39 Series - Relay interface modules
MasterINTERFACE 39 Series - Relay interface modules Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy
Solid-State Relays (SSRs) vs Electromechanical Relays (EMRs)
Oct 2010 Solid-State Relays (SSRs) vs Electromechanical Relays (EMRs) A study on worldwide relays market found the market size of solid state relays to be between $200M and $600M, which represent 17% of
AC/DC Power Modules C B. TML Series, 20 & 40 Watt. Features. 20 Watt Models
TML Series, 0 & 0 Watt Features C B Scheme LVD UL 090- Encapsulated power supplies with increased power density Replaces TML and TML 0 series PCB mount or chassis mount with screw terminals Single, dual
Chrome DIN Rail Power Supply 12V 54W 1 Phase (Class II & NEC Class 2) / DRC-12V60W1AG
Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Universal AC input voltage and full power up to 55 C Power will not de-rate for the entire input voltage range
O WA-120U series IP67. 120W Single Output Switching Power Supply. Features. Aplications
Features UniversalACinput/Fulrange Built-inactivePFCfunction Higheficiencyupto91% Protections:Shortcircuit/Overcurent/ Overvoltage/Overtemperature Fanlesdesign,colingbyfreairconvection Colingbyfreairconvection
34 Series - Slim electromechanical PCB relays 6 A. Features SERIES 34.51
34 Series - Slim electromechanical PCB relays 6 34 SERIES Features 34.51 Ultra-slim 1 Pole - 6 relay Printed circuit mount - direct or via PCB socket 35 mm rail mount - via screw, screwless or push-in
Single Output Switching Power Supply
.. RS- Code: CLP-A Single Output Switching Power Supply SPECIFICATION MODEL OUTPUT INPUT PROTECTION ENVIRONMENT SAFETY EMC (Note 6) OTHERS NOTE DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER RIPPLE
Series AMLDL-Z Up to 1000mA LED Driver
FEATURES: Click on Series name for product info on aimtec.com Series Up to ma LED Driver Models Single output Model Input Voltage (V) Step Down DC/DC LED driver Operating Temperature range 4ºC to 85ºC
Manual motor starter MS116
Data sheet Manual motor starter MS116 Manual motor starters are electromechanical devices for motor and circuit protection. These devices offer local motor disconnect means, manual ON/ OFF control, and
The Global Expert in Solid State Relay Technology. DC Series
The Global Expert in Solid State Relay Technology DC Series ABOUT US Crydom, a brand of Custom Sensors & Technologies (CST) and global expert in Solid State Relay Technology, has a distinguished record
Electronic timer CT-VBS.17+18 OFF-delayed without auxiliary voltage, for DC contactors Data sheet
Characteristics Single-function OFF-delay timer for DC contactors, without auxiliary voltage Width.5 mm CDC 5 6 F3 Approvals A culus E CCC CT-VBS a Circuit diagram b Marker label Marks a CE b C-Tick Order
PINNING - TO220AB PIN CONFIGURATION SYMBOL
BTA4 series GENERAL DESCRIPTION QUICK REFERENCE DATA Passivated triacs in a plastic envelope, SYMBOL PARAMETER MAX. MAX. UNIT intended for use in applications requiring high bidirectional transient and
Digital Expansion Modules Specifications
S7200 Programmable Controller System anual Digital Expansion odules Specifications Table A11 Digital Expansion odules Order umbers Order umber Expansion odel Digital Inputs Digital Outputs Removable Connector
CPCI-3U-AC-300W-R. Rugged 300W AC Input 3U CompactPCI Power Supply. Electrical Specification for: Telkoor Part Number: 900-4602-0000
Electrical Specification for: CPCI-3U-AC-300W-R Rugged 300W AC Input 3U CompactPCI Power Supply Telkoor Part Number: 900-4602-0000 GENERAL SCALE RELEASE DATE 12/9/06 SHEET 1 OF 6 REVISION HISTORY Rev Level
TEP 200WIR Series, 180 240 Watt
TEP 200WIR Series, 180 240 Watt Features Chassis mount with screw terminal block Including EMI filter to meet EN 55022, class A Ultra wide 4:1 input voltage ranges 8.5 36, 16.5 75, 43 160 VDC EN 50155
AC-DC Single Output Power Module
AC-DC Single Output Power Module PFHC (AC-DC Conversion) and DC-DC Conversion Integrated in One Package. 2-in-1 Design Concept One module now contains the functions previously only obtainable by combining
MasterINTERFACE 39 Series - Relay interface modules
MasterINTERFACE 39 Series - 39 Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy ejection by plastic
Application Note TMA Series
1W, SIP, Single & Dual Output DC/DC Converters Features SIP Package with Industry Standard Pinout Package Dimension: 19.5 x 10.2 x 6.1 mm (0.77 x 0.4 x 0.24 ) 5V&12V Models 19.5 x 10.2 x 7.1 mm (0.77 x
PD30ETB20xxIS. Photoelectrics, Background Suppression reflective with IR light. Main features. Description
Photoelectrics, Background Suppression reflective with IR light Main features Description The PD30ET... stainless steel sensors are built with high-quality materials and designed for harsh environments.
STEP-PS/1AC/12DC/1.5. Extract from the online catalog. Order No.: 2868567. DIN rail power supply unit 12 V DC/1.5 A, primary switched-mode, 1- phase
Extract from the online catalog STEP-PS/1AC/12DC/1.5 Order No.: 2868567 DIN rail power supply unit 12 V DC/1.5 A, primary switched-mode, 1- phase Commercial data EAN 4046356292924 Pack 1 pcs. Customs tariff
Chrome DIN Rail Power Supply 24V 30W 1 Phase (Class II & NEC Class 2) / DRC-24V30W1AZ
Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Universal AC input voltage without power de-rating Efficiency > 87.0% @ 115Vac & 230Vac NEC Class 2 / Limited
Thyristor/Diode Modules M## 501 MCC MCD MDC
Date: 29.9.214 Data Sheet Issue: 3 Absolute Maximum Ratings Thyristor/Diode Modules M## 51 VRRM VDRM [V] MCC MCD MDC 12 51-12io2 51-12io2 51-12io2 14 51-14io2 51-14io2 51-14io2 16 51-16io2 51-16io2 51-16io2
ASSR-1410, ASSR-1411 and ASSR-1420 General Purpose, Form A, Solid State Relay (Photo MOSFET) (60V/0.6A/1Ω) Features. Applications. Truth Table.
ASSR-, ASSR- and ASSR- General Purpose, Form A, Solid State Relay (Photo MOSFET) (V/.A/Ω) Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free
Series AMEPR30-AZ up to 2.5A AC-DC / DC-DC LED Driver / Converter
FEATURES: Click on Series name for product info on aimtec.com Models Single output Model Max Output Power (W) 1 AC-DC Constant Current or Constant Over temperature protection Voltage LED Driver Over current
Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points
Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points Features SELV Compliant No Detection Passive Injector Gigabit Compatible Full Protection
1 POLE - 16A 80A Inrush type. (b) Contact configuration A : 1 form A (SPST-NO) C : 1 form C (SPDT) (standard type "K" only)
FTR-K1 SERIES POWER RELAY 1 POLE - 16A 80A Inrush type FTR-K1 Series FEATURES Peak 80A inrush current (1 form A type) Low profile (height: 15.7mm) HIGH INSULATION Insulation distance (between coil and
(250 Volts Peak) SEMICONDUCTOR TECHNICAL DATA
SEMICONDUCTOR TECHNICAL DATA Order this document by MOC0/D (20 Volts Peak) The MOC0, MOC02 and MOC0 devices consist of gallium arsenide infrared emitting diodes optically coupled to a monolithic silicon
650W Single Output Power Supply 15V 24V. 27V 48V Rated Current. 0 ~ 100A 0 ~ 50A 0 ~ 40A 0 ~ 27A 0 ~ 24A 0 ~ 13.6A Rated Power
Features: Universal AC input / Full range Programmable output Voltage (0% ~ 05%) Programmable output Current (% ~ 05%) + / 0.5A auxiliary output Forced current sharing at parallel operation Power OK signal
Figure 1 - Crydom 3RHP Three-phase Hybrid Solid State Contactor. Crydom Inc.
Crydom RHP Series 3 Phase Hybrid Solid State Contactor By Paul Bachman Fellow Engineer, Crydom, Inc. ABSTRACT Solid State Relays and Contactors (SSRs) have been available in one form or the other for over
Optocoupler, Phototransistor Output, with Base Connection
CNY7 Optocoupler, Phototransistor FEATURES Isolation test voltage 5 V RMS A 6 B Long term stability i79 C NC 5 C E Industry standard dual-in-line package Lead (Pb-free component Component in accordance
4N25 Phototransistor Optocoupler General Purpose Type
4N Phototransistor Optocoupler General Purpose Type Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description The 4N is an
1000W Single Output Power Supply 15V 24V. Protection type: Total Power limit, Latch-style (Recovery after reset AC power ON or inhibit)
000W Single Output Power Supply AK-000 series Features: Universal AC input / Full range Programmable output Voltage (0% ~ 05%) Programmable output Current (% ~ 05%) + / 0.5A auxiliary output U profile,
TISP4600F3, TISP4700F3 OBSOLETE
*RoHS COMPLIANT TISP4600F3, TISP4700F3 HIGH OLTAGE BIDIRECTIONAL THYRISTOR OEROLTAGE PROTECTORS TISP4600F3, TISP4700F3 Ion-Implanted Breakdown Region Precise and Stable oltage Low oltage Overshoot under
1 Form A Solid State Relay
Form A Solid State Relay VOAT, VOAABTR FEATURES 9 S S DC S' 3 S' High speed SSR - t on /t off < 8 μs Maximum R ON. Isolation test voltage 3 V RMS Load voltage V Load current A DC configuration DIP- package
33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application
33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application Features Compliant with the IEEE802.3at Standard -40 to +60 C Temperature Range Diagnostic LEDs Full Protection
(600 Volts Peak) SEMICONDUCTOR TECHNICAL DATA
SEMICONDUCTOR TECHNICAL DATA Order this document by MOC0/D (00 Volts Peak) The MOC0, MOC02 and MOC0 devices consist of gallium arsenide infrared emitting diodes optically coupled to monolithic silicon
Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact
Data sheet Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact The CT-AHD.12 is an electronic time relay with OFF-delay. It is from the CT-D range. With their MDRC profile and a width of only
SL Series AC and DC Electronic Loads
SL Series AC and DC Electronic Loads Applications AC & DC Power Supply Testing Rechargeable batteries and chargers Fuel cell test - cells and stacks PFC circuit test Pulsed LED Test and Burn-in Laser Diode
PHASED OUT. Digital dimmable ballasts for fluorescent lamps EXCEL one4all series. PCA TCL EXCEL one4all, 18 80 W Compact and T5c fluorescent lamps
EXCEL oneall series Product description Noise-free precise control via DSI signal, switchdim, corridorfunction or DALI DALI-MEMORY Extended DALI commands CELMA energy class A1 1) Interfaces DALI DSI switchdim
5STP 21H4200 Old part no. TV 989-2100-42
Phase Control Thyristor Properties 5STP 1H Old part no. T 989-1- Key Parameters High operational capability DRM, RRM = Possibility of serial and parallel connection I TAm = 19 A Applications I TSM = 3
PHASED OUT. Digital dimmable ballasts for fluorescent lamps ECO series. PCA TCL ECO, 18 80 W Compact and T5c fluorescent lamps
Product description Noise-free precise control via DSI signal or switchdim CELMA energy class A1 1) Interfaces DSI switchdim Integrated SMART-Interface Functions Optimum filament heating in any dimmer
logic level for RCD/ GFI applications
logic level for RCD/ GFI applications BT68 series GENERAL DESCRIPTION QUICK REFERENCE DATA Glass passivated, sensitive gate SYMBOL PARAMETER MAX. MAX. MAX. MAX. UNIT thyristors in a plastic envelope, intended
K817P/ K827PH/ K847PH. Optocoupler with Phototransistor Output. Vishay Semiconductors. Description. Applications. Features.
Optocoupler with Phototransistor Output Description The K817P/ K827PH/ K847PH consist of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in an 4-lead up to 16 lead plastic
TLP281,TLP281-4 TLP281,TLP281-4 PROGRAMMABLE CONTROLLERS AC/DC-INPUT MODULE PC CARD MODEM(PCMCIA) Pin Configuration (top view) 2007-10-01
TOSHIBA PHOTOCOUPLER GaAs IRED & PHOTO-TRANSISTOR,-4,-4 PROGRAMMABLE CONTROLLERS AC/DC-INPUT MODULE PC CARD MODEM(PCMCIA) Unit in mm and -4 is a very small and thin coupler, suitable for surface mount
JNIOR. Overview. Get Connected. Get Results. JNIOR Model 310. JNIOR Model 312. JNIOR Model 314. JNIOR Model 410
The INTEG is an Ethernet I/O (digital, analog) device that monitors and controls a small set of process signals. functions as both basic I/O for integration with another application or system AND as a
DESCRIPTIO FEATURES APPLICATIO S TYPICAL APPLICATIO. LT1180A/LT1181A Low Power 5V RS232 Dual Driver/Receiver with 0.1µF Capacitors
FEATRES APPLICATIO S ESD Protection over ±kv ses Small Capacitors: kbaud Operation for R L = k, C L = pf kbaud Operation for R L = k, C L = pf Outputs Withstand ±V Without Damage CMOS Comparable Low Power:
D.C. Motors. Products and specifications subject to change without notice.
D.C. Motors Order/Technical Support - Tel: (8) 677-5 / FAX: (8) 677-865 / www.crouzet-usa.com / DC Motors Selection guide Gearbox Speed Torque max (Nm).5. Type of Gearbox 8 8 8. Power usable (w) Torque
Chrome DIN Rail Power Supply 24V 91.2W 1 Phase (Class II & NEC Class 2) / DRC-24V100W1AZ
Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Universal AC input voltage without power de-rating Efficiency > 87.0% @ 115Vac, > 89.0% @ 230Vac NEC Class
Optocoupler, Phototransistor Output, with Base Connection
Optocoupler, Phototransistor Output, with Base Connection FEATURES i794-4 DESCRIPTION This datasheet presents five families of Vishay industry standard single channel phototransistor couplers. These families
650W Single Output Power Supply
AK-650 series Features : Universal AC input with active PFC Programmable output Voltage ( 0% ~ 05% ) Programmable output Current ( % ~ 05% ) High efficiency up to 9% + / 0.5A auxiliary output Intelligent
RC NETWORKS SALES GUIDE
SALES GUIDE INTRODUCTION TO Recent developments in electronic equipment have shown the following trends: Increasing demands for numerical control machines, robotics and technically advanced appliances
RM17TE 183...528 V AC. Main. Product or component type. Product specific application. Relay monitored parameters 250 V DC 5 A DC
Characteristics multifunction control relay RM17-TE - range 183..528 V AC Complementary Reset time Maximum switching voltage Minimum switching current Maximum switching current [Us] rated supply voltage
RM35UA13MW. range 15..600 V. Main. Product or component type. Relay monitored parameters
Characteristics multifunction voltage control relay RM35-U - range 15..600 V Complementary Reset time Maximum switching voltage [Us] rated supply voltage Supply voltage limits Power consumption in W Main
Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592. * see variants. Applications.
Safety Technique SAFEMASTER Emergency Stop Module BG 5924, IP 5924 Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592 BG 5924 IP 5924 Product Description
LTR Series Uninterruptible Power Systems 700 VA - 2.1 KVA. General Specification
08/17/12 Rev2 LTR Series General Specification 700 VA to 2.1 KVA 1.0 General LTR Series Uninterruptible Power Systems 700 VA - 2.1 KVA General Specification This specification describes the features and
Optocoupler, Phototransistor Output, with Base Connection
4N25, 4N26, 4N27, 4N28 Optocoupler, Phototransistor Output, FEATURES A 6 B Isolation test voltage 5000 V RMS Interfaces with common logic families C 2 5 C Input-output coupling capacitance < pf NC 3 4
Fundamental Characteristics of Thyristors
A1001 Introduction The Thyristor family of semiconductors consists of several very useful devices. The most widely used of this family are silicon controlled rectifiers (SCRs), Triacs, SIDACs, and DIACs.
Item Symbols Conditions Ratings Units Repetitive peak reverse voltage VRRM - 600 V
TS985C6R Low-Loss Fast Recovery Diode Maximum Rating and Characteristics Maximum ratings (at Ta=25 C unless otherwise specified.) Item Symbols Conditions Ratings Units Repetitive peak reverse voltage VRRM
TIC225 SERIES SILICON TRIACS
Copyright 200, Power Innovations Limited, UK JULY 975 - REVISED MARCH 200 Sensitive Gate Triacs 8 A RMS, 70 A Peak Glass Passivated Wafer 400 V to 800 V Off-State Voltage Max I GT of 5 ma (Quadrant ) MT
7.5 Watt AC-DC Switch Power Supply
MAIN FEATURES: 7.5W Small Compact Size PCB Mount Single Output Regulated Output Range : 3.3VDC 24VDC Input Range : 85VAC 265VAC/47 63Hz Or 120VDC 370VDC Very Low Standby Power Consumption < 0.15W Better
Capacitance Cap. Tol. Suffix construction. Rated voltage
Metallized Polypropylene Film Capacitors Type:ECWFE Plastic Film Capacitors Non-inductive construction using metalized Polypropylene film with flame retardant plastic case. Features Small size Excellent
Power-monitoring unit PowerLogic System. Technical data sheet. Power Meter Series 800
Power-monitoring unit PowerLogic System Technical data sheet 2003 Power Meter Series 800 Function and characteristics PB100313 The PowerLogic Power Meter Series 800 offers all the high-performance measurement
Metal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLN Series. MLN SurgeArray TM Suppressor. Description
MLN SurgeArray TM Suppressor RoHS Description The MLN SurgeArray Suppressor is designed to help protect components from transient voltages that exist at the circuit board level. This device provides four
Solid State Relays for Heaters
New Product Solid State Relays for Heaters Single-phase G3PE Compact, Slim-profile SSRs with Heat Sinks. Models with No Zero Cross for a Wide Range of Applications. RoHS compliant. Models also available
Electronic ballasts for fluorescent lamps Products for special applications. PC BASIC, 4 28 W Electronic ballast for system output < 25 W
T5 TC-DEL TC-SEL TC-TEL TC-DD PC BASIC, 4 28 W Electronic ballast for system output < 25 W Product description CELMA Energy Efficiency Index A2 / A3 Nominal life time up to 50,000 h (at ta 50 C with a
30-120 3 Phase Modular Finally the benefits of Modular ups are for all
MUST 30-120 3 Phase Modular UPS Finally the benefits of Modular ups are for all MUST 30-120 MUST means Modular UPS System Three-phase MUST 30-120 is an uninterruptible power supply with double conversion
Power Supplies 3. SDN-P DIN Rail Series
SDN-P DIN Rail Series The SDN DIN Rail power supplies provide industry leading performance. Sag Immunity, transient suppression and noise tolerant, the SDN series ensures compatibility in demanding applications.
G4 Digital DC Output Modules. G4 Digital DC Output Modules. Features. Description. Part Numbers
Features volts opticalisolation (transient) Built-in LED status indicator Logic levels of 5, 5, and 4 VDC Removable fuse Ability to withstand one-second surge of 5 amps Operating temperature: -0 C to 70
BB800 Off-Grid Solar System
BB800 Off-Grid Solar System KEY PRODUCT FEATURES Control Box & Charge Controller 1000W of Solar Panels 4x200Ah of SLA Batteries in series 2KW Inverter Output Power Solar Panel & Battery Mounting Our entry
Fiber Optic Selector Guide for Analog & Digital Data Links, Contact Closures & Multiplexers
Fiber Optic Selector Guide for Analog & Digital Data Links, Contact Closures & Multiplexers Analog Data Links Multi-Channel Contact Closures Multiplexers Digital Data Links - Contact Closures Power Supply
5STP 06T1600 Old part no. T 906C-640-16
Phase Control Thyristor Properties 5STP T1 Old part no. T 9C--1 Key Parameters High operational capability V DRM, V RRM = 1 V Possibility of serial and parallel connection I TAVm = 1 A Applications I TSM
5STP 30T1800 Old part no. T 989C-3030-18
Phase Control Thyristor Properties 5STP 3T18 Old part no. T 989C-33-18 Key Parameters High operational capability V DRM, V RRM = 1 8 V Possibility of serial and parallel connection I TAVm = 3 18 A Applications