The Installation of External Box Please read this installation carefully before you use the products.

Transcription

1

2 The Installation of External Box Please read this installation carefully before you use the products. Precaution: 1. USB bus can supply the fixed volt for 5V/500mA to supply for USB system. Payment attention to buy HDD: There is no need to supply the power of USB HDD if you choose the Volt of HDD within 500mA. Whenever use the USB bus to supply the power to HDD, try to plug USB HDD into the Mother board of PC directly. You must use extra power source (USB) to supply the power to USB HDD if you do choose the Volt of HDD over 500mA. 2. External box might not be able to start up or function properly for some H.D.D. due to insufficient electric current output from USB port, This is a very rare situation, if the situation do occur, please purchase an output DC 5V, 1200 ma switching adapter from your local electronic store. 3. If it is a new HDD, needs to processing the disk partition System Requirement: Compatible with IBM PC, USB interface included Windows 98SE/ME/2000/XP operate system. MAC computer system MAC OS V8.6 or higher. 1

3 Packing include - USB a 2

4 Packing include - USB2.0 3

5 FEATURE 1.Standard USB2.0 high speed transfer rate. 2.Support IEEE 1394a and can be chained. (USB a model) 3.All aluminum and super slim design, to enhance heat dissipation. 4.Screw free design, convenient for installation. 5.Small size, handy to carry. 6.Bright color led light cover by acrylic guard. 7.Plug and play / hot swappable. 8.Support Win 98SE/ME/2000/XP/Mac OS 8.6 above. 9.Only one PC at the time can access the drive(usb a model) Transfer speed: 480Mb/S(USB2.0), 400Mb/S(1394a) Consume electrical Voltage: 5V, AC adapter (USB a model) 4

6 Installation Guide: 1. Just push the button indicated in the diagram, then pull out the tray. 5

7 2. After H.D.D connects with tray, fasten H.D.D by screws. 3. Aim tray at rails and push to a fixed point to close the tray. 4. After connect transfer cable and power cable, your system will detect the drive automatically. DC-in Transfer cable Attention: If this HDD is new one, please partition & format disk, otherwise the system cannot detect HDD. 6

8 Driver Installation: Windows 98SE 1. After plug the external box into, the system will remind you there is a new hardware of USB Storage Adapter add into. 2. Design the driver of the safe path (in the driver), the system will active the installation automatically. 3. After for a while, click "My Computer", USB HDD will appear the relativity on the PC. Windows ME/2000/XP The system already provided support for the software. MAC OS 8.6/9.x/above OS 8.6 edition: 1. The Driver is the GeneUSBIDE_05E3_0702.sit under the catalogue of the MAC, copy the document to the tope a table and clicks the document out, and then it will occur the document of the driver automatically. 2. Please copy the driver document to the system folder of the PC. --(System Folder) -(extensions). 3. Connect with the USB HDD OS 9.X or later edition: The system already provides support for the software. 7

9 The divided partition of the USB HDD Windows 98SE/ME SYSTEM FDISK is command that doing the divided partition to HDD, The step of how to divided partition from the HDD by using FDISK as follows: 1. Plug the cable of USB into PC, and be sure that the PC has identified HDD. 2. Execute "FDISK" under the model of COMMAND. 3. After enter the FDISK program [If the FDISK program does not work, please restart your PC again (don't plug out the USB HDD) then it will be work]. Firstly select "The fifth item" --select the USB HDD you want to divided partition for, then just see the illustration as follows: Then just follow the instruction to divided partition for the HDD of USB. Windows 2000/XP Plug the USB HDD into your system, it will appear the hot plug a play. Just click Control Panel / manage tool / computer management / Disk management. All the disk connects to the PC will appear on the chart, as well as the state of the HDD. Find out the HDD and click the right bottom of the mouse under the state of chart, just follow the step. Take a look of the icon on the bottom. 8

10 To remove the device: For Windows 98SE Users Before you remove your device please wait for Access LED on reader stops blinking to prevent data loss. For Windows ME/2000/XP Users Please double-click the icon dialog box will appear. on the system tray. A Double-click the Generic USB Storage Device to remove the device or cards for preventing from data loss. Mac OS You can remove the cable of USB after putting the icon of USB HDD on the desktop into the trash can. 9

11 FAQ After plug the Mobile Disk into system, some note cannot find the Mobile Disk. Some HDD of TOSHIBA or IBM cannot be identifying. This phenomenon shows the battery of notebook lack of power supply. At the moment, please use the power core, which come along with the product and plug the biggest side of power core into the USB interface in the rear side of notebook. Another side of power core plug into the interface of the USB Mobile Rack. (Just beside of USB interface). If you need to use the external mouse, still can plug into the power code and use it constantly. How to solve it if you can t use the Mobile Dish under some OS: It doesn t support any USB device under the WIN95 and NT4 OS, so that can t use the Mobile Disk. After formatting can PC use in the MAC? If use the Mobile Disk in the PC, can just format directly. If the PC & MAC cannot be in common use, you can use the MACOPEN software (download from the Internet) in the PC, format to the MAC model. 10