Comfort. Sewage Treatment Plants. Petrochemical Facilities, Oil Rigs. Unattended Pumping Stations. Chemical Storage and Handling Facilities

Transcription

1 - 5 kw,0-9,4 Btuh 8 to 600 Volts or Phase Meets NEC, OSHA and UL Requirements ATEX and GOST Models Available Refer to WR-80EP in the Controls section. F-4 Description Type is designed to heat areas classified as hazardous locations to provide primary or supplementary heating for comfort or freeze protection. Applications Sewage Treatment Plants Petrochemical Facilities, Oil Rigs Unattended Pumping Stations Chemical Storage and Handling Facilities Paint Storage Areas Grain Elevators Coal Preparation Plants Aircraft Servicing Areas Oil Refineries Areas Containing Metal Dusts Construction Cabinet 4 gauge steel construction with polyester powder coat paint finish. Adjustable Louvers Control the direction of airflow as needed. Rugged, Seamless, Copper Heating Elements are immersed in the sealed liquidto-air heat exchanger. Factory Sealed Heat Exchanger Features steel tubes with integral aluminum fins and filled with glycol-water heat transfer fluid. Safety Pressure Relief Device on the heat exchanger is factory helium leak tested to assure a leak-proof design. Ball Bearing Motor Permanently lubricated and equipped with built-in thermal overload protection. Epoxy Coated Aluminum Fan Prevents sparking. Features Pre-Wired Control Center with magnetic contactor and control circuit transformer. Quick-Acting Auto Reset Cutout Pole, Wall and Ceiling Mounting Kits Optional. Recessed threaded fasteners on top of heater for mounting with threaded rods. Warranty Limited Three Year Optional Features Built-in Thermostat 50 F to 90 F ( C to 2 C) Built-in Manual Disconnect Switch Pilot Light Fan Selector Switch Designed for Areas Classified Low operating temperature for atmospheres having an ignition temperature higher than 65 C (29 F) code TB. Class I, Group C, D - Divisions & 2 Class II, Groups E, F, G - Divisions & 2 Optional Classifications Temperature Code TC 60 C ( F) Class I, Groups C, D - Divisions & 2 Class II, Groups F, G - Divisions & 2 II2G Ex d IIB T Arctic Duty Construction Advantages Easy Installation Safe, Propylene Glycol Heat Transfer Fluid Low Surface Temperature Wall, Pole or Ceiling Mounting Built-in Controls Virtually Maintenance Free Corrosion Resistant V Control (V optional) Rugged and Versatile

2 Heater Rating and Operating Data ( to 5 kw) Hazardous Location... to 5 kw Models - Class I, Group C & D; Classifications Class II, Groups E, F & G, Divisions & 2 Temperature Codes... This temperature shall not exceed the ignition temperature of the gas or vapor to be encountered. All standard models 65 C (29 F) TB ITALLATION Maximum Mounting Height... 8' to ' (2.4 to meters) normal, From Floor to Bottom of Heater when heat is required at floor level. Ambient Temperature F/-45 C (Min.) 4 F/40 C (Max.) Operating Limits Maximum Operational ' (2286 meters). Check with local Chromalox sales Altitude Above Sea level office for recommendations for higher elevations. PROTECTION High-Limit... Auto reset quick acting linear type thermal cutout. Pressure Relief... Pressure relief device. HEAT EXCHANGER General Description... Steel tubes, with integral rolled-aluminum fins Core Material... Steel. Heat Transfer Fluid... Propylene Glycol (Ethylene Glycol available for arctic duty - check with local Chromalox sales office.) Heating Element Assembly... Immersion heater assembly with seamless copper sheathed heating elements. Industrial CABINET Cabinet... 4 gauge steel, polyester powder-coated. Individually adjustable louvers with minimum position stops. Fan Guard... Heavy duty polyester powder-coated steel. Fasteners... Nickel plated steel for corrosion resistance. Conduit Material... Plated steel for corrosion resistance. Control Enclosure... Cast aluminum (non-copper Alloy) NEMA 7 and 9 enclosure. Hanger Connections... 2 (two) 5/8" UNC tapped holes. CONTROLS Control Circuit... Built in V control. Optional V control available. Power Contactor Amp/600V. Transformer... Primary voltage same as heater voltage - secondary voltage, V or V. F-5

3 Ordering Information To Order Complete the Model Number using the Matrix Provided. Model Numbers When ordering heaters, specify the model number and corresponding PCN (Product Code Number, found in the Ordering Information Table). If thermostat, or disconnect switch options are required, designate these options in addition to the model number when ordering. Use PCN Numbers only on standard models. On made to order CXH heaters, complete catalog number from matrix provided. Always specify voltage, phase and kw by listing them on the purchase order product specifications. Comfort Model Blower Heater Code Heating Element Rating (kw) Code Heater Volts ( phase only) ( phase only) 4 ( phase only) ( phase only) ( phase only) Code Phase Code 0 2 Control Volts (Std.) Code Thermostat Option Without Thermostat Thermostat Code Heat Exchanger Ethylene Groups C, D, E, F, G TB 2 Propylene Groups C, D, E, F, G (Std.) TB Ethylene Groups C, D, F, G TC 4 Propylene Groups C, D, F, G TC Code Options Without Disconnect Disconnect: Amp -phase, 0 Amp -phase or -phase, specify as requried 60 Amp Disconnect Pilot Light No Disconnect Pilot Light and 0 Amp Disconnect Pilot Light and 60 Amp Disconnect Summer Fan Switch Summer with Pilot Light Disconnect with Fan Switch Disconnect Pilot Light and Fan Switch Code EP EP Typical Model Number F-6

4 Mounting Kits Pole (PMB) Wall (WMB) Ceiling (HMK) Particularly useful in buildings with insufficient Ideal for use in buildings that have substantial Simple and economical if adequate overhead strength to use other types of mounts. Requires walls. Arm only can also be bolted directly to structure exists. Requires 5/8" rod, cut and -/2" schedule 40 pipe (4" O.D.) - not supplied. structural steel. threaded (not supplied). Pole Mounting Bracket Wall Mounting Bracket Ceiling Mounting Bracket P R Q P T S R Q Mounting Kits Pole Wall Ceiling Dimensions In. (mm.) Heater Model PCN Model PCN Model PCN P Q R S T (Min.) -0 to - PMB WMB-2 02 HMK (4.0) 5-/2 (9.7) 29-/2 (749.) 6 (2.4) 7 (77.8) - to - PMB WMB HMK /2 (292.) 5-/8 (.2) (88.2) 6 (2.4) 7 (77.8) - to -5 PMB WMB HMK /2 (68.) 5-/8 (6.5) 8- (97.6) 6 (2.4) 7 (77.8) Wall Mounting Kits (for models supplied with disconnect switch) Industrial R Q U T Wall Mounting Kits (for models supplied with disconnect switch) Heater Model PCN -0 to - WMBD CHX-A- to - WMBD CHX-A- to -5 WMDD Dimensions In. (mm) Q R T U 7-7/8 -/6 0-/8 6-/6 (0.0) (789.0) (765.2) (76.2) -/4 40-/6 5-/8 8-/6 (49.) (9.8) (898.5) (8.0) 4-7/8 6-/6 40-/2 9-5/6 (77.8) (408.0) (28.7) (26.5) Wt. Lbs. (kg) 26 (.8) 28 (2.7) 0 (.6) F-7

5 Dimensions In. (mm) 2 E 2 D A B -/6 (28) C Heater Dimensions In. (mm) Dimensions (In.) Heater A B C D E (Mtg. Holes) -0 to - 9-/8 (485.8) 2-7/8 (606.4) 2 (5.4) -/2 (88.9) -5/8 (46.) - to - (65.0) 27-7/8 (708.0) 2 (5.4) 4-/2 (.9) 7-5/8 (447.7) - to /9 (86.) -7/8 (809.6) 2-/4 (552.5) 5-/2 (9.7) 2-5/8 (549.) Notes A. E dimension mounting hole center to center. B. Disconnect switch option increases B dimension by 7 inches (77.8 mm). F-8

6 Comfort Optional Controls & Disconnects Built-in Adjustable Thermostat Temperature range 50 F to 90 F ( C to 2 C) Adjustable control knob on exterior of explosion-proof enclosure Mounted and wired to heater control center Eliminates installation of wall thermostats and associated explosion-proof conduit. Factory Installed Built-in Disconnect Switch, 0 or 60 Amp as required by application Factory installed, eliminating field labor Meets National Electric Code (NEC) Built-in Fan Switch Allows fan only operation for cooling Specifications and Ordering Information Electrical (60 Hz) Motor Full Load Control kw Volts Phase Amps Volts Phase HP RPM Air Delivery Temp. Air Flow Air Speed Rise f /min (m /hr) ft/min (m/min) F ( C) Ordering Horiz. Throw Mtg. Height Ft. (mm) Ft. (mm.) Model Stock PCN Standard Models (89) 900 (274.) (7.2) 28 (8.5) 8 (2.4) EP (6.4) (89) 900 (274.) (7.2) 28 (8.5) 8 (2.4) EP (6.4) (89) 900 (274.) (7.2) 28 (8.5) 8 (2.4) EP 0260 (6.4) (89) 900 (274.) (7.2) 28 (8.5) 8 (2.4) EP (6.4) (89) 900 (274.) (7.2) 28 (8.5) 8 (2.4) EP (6.4) (89) 900 (274.) (7.2) 28 (8.5) 8 (2.4) EP (6.4) (89) 900 (274.) (7.2) 28 (8.5) 8 (2.4) EP (6.4) (89) 900 (274.) (7.2) 28 (8.5) 8 (2.4) EP (6.4) (89) 900 (274.) (7.2) 28 (8.5) 8 (2.4) EP (6.4) (89) 900 (274.) (7.2) 28 (8.5) 8 (2.4) EP (6.4) (89) 900 (274.) (7.2) 28 (8.5) 8 (2.4) EP 0264 (6.4) (89) 900 (274.) (7.2) 28 (8.5) 8 (2.4) EP 0262 (6.4) (89) 900 (274.) 22 (2.2) 28 (8.5) 8 (2.4) EP 026 (6.4) (89) 900 (274.) 22 (2.2) 28 (8.5) 8 (2.4) EP 0269 (6.4) (89) 900 (274.) 22 (2.2) 28 (8.5) 8 (2.4) EP (6.4) (89) 900 (274.) 22 (2.2) 28 (8.5) 8 (2.4) EP 0265 (6.4) (89) 900 (274.) 22 (2.2) 28 (8.5) 8 (2.4) EP S 0266 (6.4) (89) 900 (274.) 22 (2.2) 28 (8.5) 8 (2.4) EP 0267 (6.4) (89) 900 (274.) 22 (2.2) 28 (8.5) 8 (2.4) EP (6.4) (89) 900 (274.) 22 (2.2) 28 (8.5) 8 (2.4) EP (6.4) (89) 900 (274.) 22 (2.2) 28 (8.5) 8 (2.4) EP 0260 (6.4) (89) 900 (274.) 22 (2.2) 28 (8.5) 8 (2.4) EP (6.4) (89) 900 (274.) 22 (2.2) 28 (8.5) 8 (2.4) EP (6.4) (89) 900 (274.) 22 (2.2) 28 (8.5) 8 (2.4) EP 026 (6.4) (26.) 27 (.0) 2 (9.8) (.0) EP 026 (6.4) (26.) 27 (.0) 2 (9.8) (.0) EP 026 (6.4) (26.) 27 (.0) 2 (9.8) (.0) EP (6.4) (26.) 27 (.0) 2 (9.8) (.0) EP (6.4) (26.) 27 (.0) 2 (9.8) (.0) EP (6.4) (26.) 27 (.0) 2 (9.8) (.0) EP (6.4) (26.) 27 (.0) 2 (9.8) (.0) EP (6.4) (26.) 27 (.0) 2 (9.8) (.0) EP 026 (6.4) (26.) 27 (.0) 2 (9.8) (.0) EP 0262 (6.4) (26.) 27 (.0) 2 (9.8) (.0) EP 026 (6.4) (26.) 27 (.0) 2 (9.8) (.0) EP (6.4) (26.) 27 (.0) 2 (9.8) (.0) EP (6.4) Wt. (Lbs.) Industrial F-9

7 Electrical (60 Hz) Motor Air Delivery Ordering Full Temp. Horiz. Load Control Air Flow Air Speed Rise Throw kw Volts Phase Amps Volts Phase HP RPM f /min (m /hr) ft/min (m/min) F ( C) Ft. (mm) (26.) 6 (.0) 2 (9.8) (26.) 6 (.0) 2 (9.8) (26.) 6 (.0) 2 (9.8).6 70 (26.) 6 (.0) 2 (9.8) (64) 450 (64) 450 (64) 450 (64) 70 (26.) 70 (26.) 70 (26.) 70 (26.) 70 (26.) 40 (7.0) 40 (7.0) 40 (7.0) 40 (7.0) 6 (.0) 6 (.0) 6 (.0) 6 (.0) 6 (.0) (7.2) (7.2) (7.2) (7.2) 2 (9.8) 2 (9.8) 2 (9.8) 2 (9.8) 2 (9.8) 47 (4.) 47 (4.) 47 (4.) 47 (4.) Mtg. Height Ft. (mm.) Model Stock (.0) EP (.0) EP (.0) EP S (.0) EP (.0) EP (.0) EP (.0) EP (.0) EP (.0) EP (.0) (.0) (.0) (.0) EP EP EP EP S PCN Wt. (Lbs.) 40 (6.6) 40 (6.6) 40 (6.6) 40 (6.6) 40 (6.6) 40 (6.6) 40 (6.6) 40 (6.6) 40 (6.6) 60 (72.7) 60 (72.7) 60 (72.7) 60 (72.7) 450 (64) 40 (7.0) (7.2) 47 (4.) 450 (64) 40 (7.0) (7.2) 47 (4.) 450 (64) 40 (7.0) (7.2) 47 (4.) 450 (64) 40 (7.0) (7.2) 47 (4.) (.0) EP (.0) EP (.0) EP (.0) EP (72.7) (72.7) (72.7) (72.7) 400 (279) 00 (04.8) 9 (2.7) 4 (.) (.0) EP (77.7) 400 (279) 00 (04.8) 9 (2.7) 4 (.) (.0) EP (77.7) 400 (279) 00 (04.8) 4 (2.9) 4 (.) (.0) EP S 0 7 (77.7) 400 (279) 00 (04.8) 4 (2.9) 4 (.) (.0) EP (77.7) 400 (279) 00 (04.8) 4 (2.9) 4 (.) (.0) EP (77.7) 400 (279) 00 (04.8) 4 (2.9) 4 (.) (.0) EP (77.7) /2 (959) 70 (26.) 2 (7.8) 54 (6.5) (.0) EP (98.2) /2 (959) 70 (26.) 2 (7.8) 54 (6.5) (.0) EP (98.2) /2 (959) 70 (26.) 2 (7.8) 54 (6.5) (.0) EP (98.2) /2 (959) 70 (26.) 2 (7.8) 54 (6.5) (.0) EP (98.2) /2 (959) 70 (26.) 9 (2.7) 54 (6.5) (.0) EP S (98.2) /2 (959) 70 (26.) 9 (2.7) 54 (6.5) (.0) EP (98.2) /2 (959) 70 (26.) 9 (2.7) 54 (6.5) (.0) EP (98.2) /2 (959) 70 (26.) 9 (2.7) 54 (6.5) (.0) EP (98.2) /2 (959) 70 (26.) 45 (.0) 54 (6.5) (.0) EP (98.2) /2 (959) 70 (26.) 45 (.0) 54 (6.5) (.0) EP (98.2) /2 (959) 70 (26.) 45 (.0) 54 (6.5) (.0) EP (98.2) /2 (959) 70 (26.) 45 (.0) 54 (6.5) (.0) EP (98.2) Models with Built-In Thermostats (26.) 6 (.0) 2 (9.8) (.0) EP S (68.2) (279) 70 (26.) 4 (2.9) 4 (.) (.0) EP S (7.2). /2 (959) 70 (26.) 2 (7.8) 54 (6.5) (.0) EP (98.2) 0 7. /2 (959) 70 (26.) 9 (2.7) 54 (6.5) (.0) EP S (98.2) 5 4. /2 (959) 70 (26.) 45 (.0) 54 (6.5) (.0) EP S 26 (98.2) Stock Status: S = stock = non-stock To Order Specify model, PCN, kw, volts, phase and quantity. F-