Super Coaxial Micro-Plugs and Receptacles

Transcription

1 The GigaLane s Super coaxial Micro-Plugs (SCMP) and Receptacles (SCMJ) are specially designed for Space Reduction on Circuit Boards and for Vertical Mounting on RF Boards. They have the excellent RF performance on the right angle transitions up to 6 GHz. SCMP & SCMJ Features Fully compatible with Hirose W.FL and I-PEX MHF-Ⅲ series DC to 6 GHz (VSWR <1.3) Cable assembly of 0.64mm, 0.70mm, 0.81mm Mated heights of 1.40 mm Vertical mounting on receptacle (SMT) Applications Navigation, DMB, PDA, Notebook PC, GPS, Wireless LAN, Bluetooth GSM, GPRS & CDMA mobile Phones Measurement instruments and test systems Mobile Phone GPS Bluetooth PCI 1/7

2 Mated Height & Dimensions SCMP Cable Assembly Plug Type Plug Height 0.70mm 0.81mm Cable Type (Dia.) 1.13mm 1.30mm *1.32mm 1.37mm CMP 2.5mm CMP 1.8mm SCMP 1.4mm Cable Color White Gray Gray Gray * 1.32mm : 1.30mm Double Shield type Plugs Caution Do not apply an excessive load to the cable after the connectors are mated. Please refer to the permissible load right. SCMP N Max. 4N Max. Receptacle SCMJ-S00 2N Max. 2/7

3 Part No. & Ordering Information Double-Ended Cable Assembly Case 1) Normal Type Case 2) Case 3) Reverse Type Different Connector SCMP14(G)-W081-SCMP14(G)-150mm(R) : Plug Type 2 : Plug Height 3 : Cable Color CMP / SCMP 25(G) : 2.5mm (CMP only) W : White 18(G) : 1.8mm (CMP only) B : 14(G) : 1.4mm (SCMP only) 5 : Cable Length 6 : Connector Direction Customized R : Reverse Min. Length : 30mm 4 : Cable Select 070 (Dia : 0.70 mm) 081 (Dia : 0.81 mm) 113 (Dia : 1.13 mm) 130 (Dia : 1.30 mm) 130(D) (Dia : 1.32 mm) 137 (Dia : 1.37 mm) Single-Ended Cable Assembly a b c SCMP14(G)-W mm(a/b/c) : Plug Type 2 : Plug Height 3 : Cable Color 4 : Cable Select SCMP 14(G) : 1.4mm (SCMP only) W : White 070 (Dia : 0.70 mm) B : 081 (Dia : 0.81 mm) 5 : Cable Length 6 : Strip Condition Customized Min. Length : 30mm Ground/Insulator/Signal Length Unit : mm 3/7

4 Product Specifications Item Impedance Insulation Resistance VSWR Unmating Force Durability Specifications 50 ohm ± MΩ min. SCMP14(G)-B070-SCMP14(G)-100mm SCMP14(G)-W081-SCMP14(G)-100mm 2 N min. Contact Resistance Center : 20 m Ohms max. Outside : 10 m Ohms max. Conditions TDR Measurement 100V DC 1.3 Max. up to 6 GHz Measured by a 0.5mm pin gauge 30 cycle Humidity (Steady State) üno damage, cracks or parts dislocation. üinsulation resistance 100M Ohms min. (when high humidity) ü Insulation resistance 500M Ohms min. (when dry) 96 hours at temperature of 40 and humidity of 95% Material & Finish Parts Components Materials Finish body Titanium Copper Plug insulator PBT black color center contact Beryllium Copper body Phosphor Bronze Receptacle insulator LCP black color center contact Brass 4/7

5 Performance - 1 SCMP14-B070-SCMP mm Frequency : 0.05 ~ 6 GHz Test Equipment : HP8510C Test Configuration : 3.5mm full 2-port calibration Cable Length : 100 mm Performance - 2 Test Configuration 5/7

6 Super Coaxial Micro Jack (SCMJ) Receptacles Recommended PCB Pattern Part No. SCMJ-S * Reel Packaging (2000 pcs/reel) Receptacles Caution Temperature (Degree C) 260 Heating peak 260 degree C 3 Seconds degree C Preheating (130 to 165 degree C) Within 2 minutes 40 t0 50 Seconds Time 1) The temperature profile above is for mounting the receptacles (SCMJ-S00) on PCB. 2) This profile is subject to change according to different conditions. 3) The maximum temperature must not exceed 260 degree. 4) The maximum temperature for manual soldering is 350 degree for 5 seconds. 6/7

7 Adapters & Extraction Tool Conversion Adapters SMA(M) to SCMJ SMA(M) to SCMP P/N:SMS-ADP-SCMJ-01 P/N:SMS-ADP- SCMP-01 SCMP Extraction Tool P/N: SCMP-ET-02 Material: Stainless steel For easier and faster extraction 7/7