Permission to copy The CAD Academy
|
|
|
- Arnold Briggs
- 7 years ago
- Views:
Transcription
1 Introduction to Solidworks Permission to copy The CAD Academy
2 Solidworks works the way engineers design and think and that is why it has become successful so quickly. Engineers and drafters say that it is easy to learn and gives them a model that they have complete confidence in manufacturing and know that it will work, just by using the tools provided with this one piece of software. Solidworks is powerful. This is the Solidworks interface. Notice that there are links on the right that bring up Tutorials and websites. These are extremely helpful and when you are finished with our Quickstarts we suggest you try out the Tutorials in particular to learn this software. To start our project select the sheet of paper shown. Notice there is another sheet of paper on the right side panel and you can use that one as well.
3 Page - 2 Select PART from the dialog box shown and SELECT OK. We are going to make our FIRST part or drawing in Solidworks. Solidworks works like engineers think and they start with a sketch of an idea. We will begin by selecting the SKETCH tab. We have some sketching options to choose from. We are going to make a plate so choose the RECTANGLE.
4 Page - 3 Next, we are asked for a PLANE to begin our sketch. Move your mouse to the FRONT PLANE it should HIGHLIGHT and use your left mouse button to SELECT it. Let s rotate our VIEW into a PLAN or STRAIGHT ON view by Selecting the ICON shown and selecting the FRONT view orientation. We are now ready to draw our rectangle. It doesn t matter what size we make it as the program is PARAMETRIC and we can change sizes at any time. Make two picks with the LEFT mouse button as shown.
5 Page 4 After we have sketched our idea we can refine it by DEFINING the size of our plate. We just have ONE dimension tool and it can dimension ANYTHING. Select SMART dimension and then SELECT the LINE shown and it will HIGHLIGHT. Next select the DIMENSION LINE LOCATION. Next you should see the following dialog box. Change the value to 4.00 and press the GREEN CHECK which is the same as OK.
6 Page 5 Parametric is DIMENSION driven and we can change the size based on the dimension. Next, using what we have learned select the line shown and dimension that line to Results should be as shown. To further refine out sketch we will select the FEATURES tab There are things grayed out that we cannot do, but one thing we can is EXTRUDE. Select Extrude boss/base
7 Page 6 Change only the value shown as right in the EXTRUDE dialogue box to.30 and then select the GREEN CHECK. We definitely want to add more to this design. Notice the FEATURE TREE we are creating as we go. You can go back to anything you have done in the drawing by using the FEATURE TREE. SELECT SKETCH And we will add more interest in this part. ROTATE the object to the FRONT plane by using this VIEW tool.
8 Page 7 Select CIRCLE MOVE to approximately the CENTER of the PLATE to create the CIRCLE. The first PICK turns the top plane blue to SELECT it. Now pick a center point and then a second point to create the CIRCLE. It does not matter what size it is because we can change it. Change the size of the CIRCLE to 1.00 in the CIRCLE dialogue box and then select the GREEN CHECK OK.
9 Page 8 We want to make sure the CIRCLE is in the center and a great tool to use is SMART DIMENSION. Next select SMART DIMENSION. Select the TOP LINE and then PICK the CENTER Next select the DIMENSION line LOCATION and change the VALUE to Continue with SMART DIMENSION. Select CENTER and then select the LINE shown. Select the DIMENSION LINE LOCATION and change the VALUE to 2.00 and our circle will be perfectly in the CENTER using SMART DIMENSION. Use the GREEN check to close the DIMENSION DIALOGUE Box.
10 Page 9 Go to the FEATURES tab and select EXTRUDE Also, select the view icon and change to ISOMETRIC view so we can see our extrusion. Change the VALUE of the extrusion to.30 and use the green check to close the dialog box. Let s continue to refine our part by adding FILLETS to our plate.
11 Page 10 Fillet rounds the corners by a specified radius. The radius will be.10in. Select the 4 corner as shown. Using CHAMFER we will simulate a weld between the cylinder and the plate. The CHAMFER can be selected by using the small black down arrow and then selecting CHAMFER. Make sure the value of the radius and the distance is as shown and SELECTS the BOTTOM of the CYLINDAR. Select the green check to complete the chamfer. Check out the different DISPLAY views by trying out each of the options, but end with SHADED with EDGES
12 Page 11 Another interesting way to view our object is to RIGHT mouse click in empty space and select ZOOM and then ROTATE VIEW. This allows you to ORBIT your part by picking a POINT and holding down the pick as you move your mouse. Suppose it was our job to save money on the manufacturing of this part. We could do that by removing material from the part. Start by going to VIEW and select BACK. Then select SHELL from the top menu.
13 Page 12 Select the BACK of the part and it will turn BLUE then make sure the value is.10in. Then check SHOW PREVIEW and it should look like this. Select the green check to complete the SHELL. Check it out using the ORBIT tool. Right mouse click in empty space to get the ORBIT tool. If this is your first part, then CONGRATULATION on completing it! Solidworks makes you save your drawings which is a great habit to get into. Go to the SOLIDWORKS icon box and select SAVEAS and save this part where your instructor allows you to save it. Solidworks will name your file or you can name it something else. Notice that it is saved with a file format of.prt or.sldprt
14 Page 13 Now we are going to do a DRAWING of the part we created. Go to the piece of paper and select the 3 rd option DRAWING. Solidworks allows you to have different title blocks, but we will choose a LANDSCAPE A from the standard title blocks that come with the package. Select LANDSCAPE and then OK. Double click on YOUR part name. If you DON T SEE it use the BROWSE button. Make sure the FRONT view is selected in the ORIENTATION.
15 Page 14 Move to the right and place the front or plan view approximately here. Move the mouse to the RIGHT and you should see a SIDE view. Place approximately here. Place the top view as well as the isometric view on the sheet. Check the green OK. Select the isometric view with your mouse. When you see the MOVE tool DRAG it into place.
16 Page 15 By pressing the ESC key twice you will unselect anything that may selected. Selected the isometric view. Select the VIEW tool and use SHADED with EDGES for this view. We could also use HIDDEN line. There are many items we could add to this drawing, but let s bring in items from our MODEL. Press ESC twice to make sure nothing is selected and then Go to ANNOTATION and then MODEL ITEMS. Select the GREEN check OK and then select YES from the DIALOGUE BOX. We just brought in all the dimensions from our model. You can pick and delete redundant ones and you can select a dimension by its TEXT and MOVE into a new position. You could also SMART dimension anything that is missing.
17 Page 16 You can also HATCH by selecting this tool and selecting one of the views. If you have ever done 2D drawings you can see that using 3D is much easier to use. Solidworks makes it easy to analyze this part for manufacturing called finite element analysis and to make prototypes and actually manufacture and produce the part. Congratulations on your first PART and DRAWING. Lesson is complete.
SolidWorks: Mirror, Revolve, and. Introduction to Robotics
SolidWorks: Mirror, Revolve, and Circular Pattern Introduction to Robotics Let s Review At this point we have learned the following: Extrude Boss/Base Extruded Cut Adding Relations and Dimensions Linear
SolidWorks Tutorial 3 MAGNETIC BLOCK
SolidWorks Tutorial 3 MAGNETIC BLOCK Magnetic Block In this exercise you will make a magnetic block. To do so, you will create a few parts, which you will assemble. You will learn the following new applications
Solidworks Lesson 6 - Assembly & Part Drawings. UCF Engineering
Solidworks Lesson 6 - Assembly & Part Drawings UCF Engineering Mechanical Drawings So far we have been dealing with creating parts and assemblies in SolidWorks, however, when you go to get a part machined,
Introduction to Autodesk Inventor for F1 in Schools
Introduction to Autodesk Inventor for F1 in Schools F1 in Schools Race Car In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s digital prototyping strategy
Introduction to Autodesk Inventor for F1 in Schools
F1 in Schools race car Introduction to Autodesk Inventor for F1 in Schools In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s Digital Prototyping strategy
SolidWorks Tutorial 4 CANDLESTICK
SolidWorks Tutorial 4 CANDLESTICK Candlestick In this tutorial you will make a simple container and a candlestick out of sheetmetal. You will learn about working with sheet metal in SolidWorks. We will
SolidWorks. SolidWorks Teacher Guide. and Student Courseware
SolidWorks SolidWorks Teacher Guide and Student Courseware SolidWorks Corporation Outside the U.S.: +1-978-371-5011 300 Baker Avenue Fax: +1-978-371-7303 Concord, Massachusetts 01742 USA Email: info@solidworks.com
Introduction to CATIA V5
Introduction to CATIA V5 Release 16 (A Hands-On Tutorial Approach) Kirstie Plantenberg University of Detroit Mercy SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com
Generative Drafting. Page 1 1997 2001 DASSAULT SYSTEMES. IBM Product Lifecycle Management Solutions / Dassault Systemes
Generative Drafting Page 1 Tutorial Objectives Description This Tutorial is an introduction to Generative Drafting. Message To show how CATIA V5 allows the user to automatically generate associative drafting
To Begin Customize Office
To Begin Customize Office Each of us needs to set up a work environment that is comfortable and meets our individual needs. As you work with Office 2007, you may choose to modify the options that are available.
Layout Tutorial. Getting Started
Getting Started Layout Tutorial This tutorial will explain how create a layout template, send views to a layout page, then save the document in PDF format. In this tutorial you will learn about: Creating
Autodesk Fusion 360 Badge Guide: Design an F1 in Schools Trophy
Autodesk Fusion 360 Badge Guide: Design an F1 in Schools Trophy Abstract: Gain basic understanding of creating 3D models in Fusion 360 by designing an F1 in Schools trophy. This badge may be claimed by
SolidWorks Implementation Guides. Sketching Concepts
SolidWorks Implementation Guides Sketching Concepts Sketching in SolidWorks is the basis for creating features. Features are the basis for creating parts, which can be put together into assemblies. Sketch
SpaceClaim Introduction Training Session. A SpaceClaim Support Document
SpaceClaim Introduction Training Session A SpaceClaim Support Document In this class we will walk through the basic tools used to create and modify models in SpaceClaim. Introduction We will focus on:
CATIA Drafting TABLE OF CONTENTS
TABLE OF CONTENTS Introduction...1 Drafting...2 Drawing Screen...3 Pull-down Menus...4 File...4 Edit...5 View...6 Insert...7 Tools...8 Drafting Workbench...9 Views and Sheets...9 Dimensions and Annotations...10
Chapter 9. Editing Features. Learning Objectives
Chapter 9 Editing Features Learning Objectives After completing this chapter, you will be able to: Edit features. Edit sketches of the sketch based features. Edit the sketch plane of the sketch based features.
Creating a Poster in PowerPoint 2010. A. Set Up Your Poster
View the Best Practices in Poster Design located at http://www.emich.edu/training/poster before you begin creating a poster. Then in PowerPoint: (A) set up the poster size and orientation, (B) add and
Create a Poster Using Publisher
Contents 1. Introduction 1. Starting Publisher 2. Create a Poster Template 5. Aligning your images and text 7. Apply a background 12. Add text to your poster 14. Add pictures to your poster 17. Add graphs
Learning Autodesk. Modeling, Analysis and Animation SDC. Randy H. Shih. Better Textbooks. Lower Prices. PUBLICATIONS www.sdcpublications.
Learning Autodesk Inventor 2012 Modeling, Analysis and Animation Randy H. Shih SDC Better Textbooks. Lower Prices. PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Visit the following
Getting Started with CATIA Version 5
WB Getting Started with CATIA Version 5 Page 1 CATIA User Interface Let s review the following key features: Multi-document support Standard and specific menus & toolbars (File, Edit, Insert, ) Standard
Microsoft PowerPoint Exercises 4
Microsoft PowerPoint Exercises 4 In these exercises, you will be working with your Music Presentation file used in part 1 and 2. Open that file if you haven t already done so. Exercise 1. Slide Sorter
Speaker Drafting. Page 1 1997 2001 DASSAULT SYSTEMES
Speaker Drafting Page 1 Tutorial Objectives Description This Tutorial is an introduction to Assembly Drafting. Message To show how CATIA V5 allows the user to automatically generate associative drafting
Microsoft Word 2010: How to Resize and Move Clip Art
Microsoft Word 2010: How to Resize and Move Clip Art Resizing Clip Art If your clip art is too big or too small you can resize to suit your needs. Click on your image with the left mouse button. You should
Introduction to Word 2007
Introduction to Word 2007 You will notice some obvious changes immediately after starting Word 2007. For starters, the top bar has a completely new look, consisting of new features, buttons and naming
CATIA Functional Tolerancing & Annotation TABLE OF CONTENTS
TABLE OF CONTENTS Introduction...1 Functional Tolerancing and Annotation...2 Pull-down Menus...3 Insert...3 Functional Tolerancing and Annotation Workbench...4 Bottom Toolbar Changes...5 3D Grid Toolbar...5
2013 Getting Started Guide
2013 Getting Started Guide The contents of this guide and accompanying exercises were originally created by Nemetschek Vectorworks, Inc. Vectorworks Fundamentals Getting Started Guide Created using: Vectorworks
There are two distinct working environments, or spaces, in which you can create objects in a drawing.
That CAD Girl J ennifer dib ona Website: www.thatcadgirl.com Email: thatcadgirl@aol.com Phone: (919) 417-8351 Fax: (919) 573-0351 Autocad Model Space and Paper Space Model Space vs. Paper Space Initial
SMART BOARD USER GUIDE FOR PC TABLE OF CONTENTS I. BEFORE YOU USE THE SMART BOARD. What is it?
SMART BOARD USER GUIDE FOR PC What is it? SMART Board is an interactive whiteboard available in an increasing number of classrooms at the University of Tennessee. While your laptop image is projected on
CATIA for Design and Engineering. Version 5 Releases 14 & 15. David S. Kelley. Central Michigan University SDC
CATIA for Design and Engineering ersion 5 Releases 4 & 5 David S. Kelley Central Michigan University SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com TUTORIAL Extruded
SolidWorks Building Blocks Tutorial. Toy-car
SolidWorks Building Blocks Tutorial Toy-car From the age of until the age of For use with SolidWorks Educational Release 2010-2011 This tutorial was developed for SolidWorks Worldwide and may be used by
Sample Table. Columns. Column 1 Column 2 Column 3 Row 1 Cell 1 Cell 2 Cell 3 Row 2 Cell 4 Cell 5 Cell 6 Row 3 Cell 7 Cell 8 Cell 9.
Working with Tables in Microsoft Word The purpose of this document is to lead you through the steps of creating, editing and deleting tables and parts of tables. This document follows a tutorial format
Part Design. Page 1 1997 2001 DASSAULT SYSTEMES. IBM Product Lifecycle Management Solutions / Dassault Systemes
Part Design Page 1 Tutorial Objectives Description This tutorial is an introduction to Part Design. Message This tutorial illustrates how CATIA can Design precise 3D mechanical parts with an intuitive
LESSON 7: IMPORTING AND VECTORIZING A BITMAP IMAGE
LESSON 7: IMPORTING AND VECTORIZING A BITMAP IMAGE In this lesson we ll learn how to import a bitmap logo, transform it into a vector and perform some editing on the vector to clean it up. The concepts
Microsoft Word 2011: Create a Table of Contents
Microsoft Word 2011: Create a Table of Contents Creating a Table of Contents for a document can be updated quickly any time you need to add or remove details for it will update page numbers for you. A
Publisher 2010 Cheat Sheet
April 20, 2012 Publisher 2010 Cheat Sheet Toolbar customize click on arrow and then check the ones you want a shortcut for File Tab (has new, open save, print, and shows recent documents, and has choices
Layout Tutorial. Chapter 10: Getting Started
Chapter 10: Layout Tutorial In this tutorial we will create a layout template, send a few views to a layout page, then save this document in PDF format. In this tutorial you will learn about: Creating
Creating Drawings in Pro/ENGINEER
6 Creating Drawings in Pro/ENGINEER This chapter shows you how to bring the cell phone models and the assembly you ve created into the Pro/ENGINEER Drawing mode to create a drawing. A mechanical drawing
Tip of the Week: Creating Geometry from AutoCAD Drawings
PTC Email Newsletter March 4, 2002 PTC Product Focus: Assembly Performance Extension (APX) Tip of the Week: Creating Geometry from AutoCAD Drawings Training: Upcoming Training Classes PTC Product Focus:
SolidWorks Tutorial 5
SolidWorks Tutorial 5 Tic-Tac-Toe Preparatory Vocational Training and Advanced Vocational Training Dassault Systèmes SolidWorks Corporation, 75 Wyman Street Waltham, Massachusetts 05 USA Phone: +-800-69-9000
Merging Labels, Letters, and Envelopes Word 2013
Merging Labels, Letters, and Envelopes Word 2013 Merging... 1 Types of Merges... 1 The Merging Process... 2 Labels - A Page of the Same... 2 Labels - A Blank Page... 3 Creating Custom Labels... 3 Merged
Figure 1 - Delta Theta Input Selection
Creating Cams in Pro/Engineer Wildfire Using DYNACAM Mechanical Engineering Mechanical Design Created by: David E. Yamartino M.S. Mechanical Engineering May 2004 April 12, 2004 Objective: The objective
DOING MORE WITH WORD: MICROSOFT OFFICE 2010
University of North Carolina at Chapel Hill Libraries Carrboro Cybrary Chapel Hill Public Library Durham County Public Library DOING MORE WITH WORD: MICROSOFT OFFICE 2010 GETTING STARTED PAGE 02 Prerequisites
Adobe Illustrator CS5 Part 1: Introduction to Illustrator
CALIFORNIA STATE UNIVERSITY, LOS ANGELES INFORMATION TECHNOLOGY SERVICES Adobe Illustrator CS5 Part 1: Introduction to Illustrator Summer 2011, Version 1.0 Table of Contents Introduction...2 Downloading
Basic AutoSketch Manual
Basic AutoSketch Manual Instruction for students Skf-Manual.doc of 3 Contents BASIC AUTOSKETCH MANUAL... INSTRUCTION FOR STUDENTS... BASIC AUTOSKETCH INSTRUCTION... 3 SCREEN LAYOUT... 3 MENU BAR... 3 FILE
Pro/ENGINEER Wildfire 4.0 Basic Design
Introduction Datum features are non-solid features used during the construction of other features. The most common datum features include planes, axes, coordinate systems, and curves. Datum features do
TABLE OF CONTENTS. INTRODUCTION... 5 Advance Concrete... 5 Where to find information?... 6 INSTALLATION... 7 STARTING ADVANCE CONCRETE...
Starting Guide TABLE OF CONTENTS INTRODUCTION... 5 Advance Concrete... 5 Where to find information?... 6 INSTALLATION... 7 STARTING ADVANCE CONCRETE... 7 ADVANCE CONCRETE USER INTERFACE... 7 Other important
Internet Explorer 7. Getting Started The Internet Explorer Window. Tabs NEW! Working with the Tab Row. Microsoft QUICK Source
Microsoft QUICK Source Internet Explorer 7 Getting Started The Internet Explorer Window u v w x y { Using the Command Bar The Command Bar contains shortcut buttons for Internet Explorer tools. To expand
Layout Tutorial. Chapter 10: Getting Started
Chapter 10: Layout Tutorial In this tutorial we will create a layout template, send a few views to a layout page, then save this document in PDF format. In this tutorial you will learn about: Creating
Updox, LLC support@updox.com 614-547-9635
Set Up and User Guide Version 3.2.2 Updox, LLC support@updox.com 614-547-9635 Table of Contents Creating and Managing Internal Updox Users... 3 How to Send and Receive Faxes... 4 How to Import Files into
Introduction to Measurement Tools
Introduction to Measurement Tools Revu's built-in measurement tools make it easy to take length, area, perimeter, diameter, volume and radius measurements, count from PDFs and perform area cutouts. Compatibility
Understand the Sketcher workbench of CATIA V5.
Chapter 1 Drawing Sketches in Learning Objectives the Sketcher Workbench-I After completing this chapter you will be able to: Understand the Sketcher workbench of CATIA V5. Start a new file in the Part
Getting Started on the Computer With Mouseaerobics! Windows XP
This handout was modified from materials supplied by the Bill and Melinda Gates Foundation through a grant to the Manchester City Library. Getting Started on the Computer With Mouseaerobics! Windows XP
Avaya Flare Experience for Windows Quick Reference
Avaya Flare Experience for Windows Quick Reference Making voice calls Making a voice call using the dialpad 1. Click the Call button under the center spotlight or press the CONTROL + D keys on your keyboard
Using Rational Rose to Create Object-Oriented Diagrams
Using Rational Rose to Create Object-Oriented Diagrams This is a brief overview to get students started in using Rational Rose to quickly create object-oriented models and diagrams. It is not by any means
Lesson Four 3D Modeling
Lesson Four 3D Modeling In this lesson you will learn how to: Easily Rotate the UCS to model in different planes Model lines in a method similar to drawing isometrics Create 3D Router Lines Automatically
Excel -- Creating Charts
Excel -- Creating Charts The saying goes, A picture is worth a thousand words, and so true. Professional looking charts give visual enhancement to your statistics, fiscal reports or presentation. Excel
Software for Producing Rack Layouts and Purchase Orders
1 Software for Producing Rack Layouts and Purchase Orders Welcome to RackTools: software that makes it simple and quick to specify Middle Atlantic Products. RackTools has been designed with one purpose
CATIA Basic Concepts TABLE OF CONTENTS
TABLE OF CONTENTS Introduction...1 Manual Format...2 Log on/off procedures for Windows...3 To log on...3 To logoff...7 Assembly Design Screen...8 Part Design Screen...9 Pull-down Menus...10 Start...10
SolidWorks tutorial 13-5 Exciting. Includes SolidWorks SustainabilityXpress
SolidWorks tutorial 13-5 Exciting Includes SolidWorks SustainabilityXpress A better world for our children and grandchildren Pre-vocational Secondary Education and Senior Secondary Vocational Education
Getting Started in Tinkercad
Getting Started in Tinkercad By Bonnie Roskes, 3DVinci Tinkercad is a fun, easy to use, web-based 3D design application. You don t need any design experience - Tinkercad can be used by anyone. In fact,
WebEx Sharing Resources
WebEx Sharing Resources OTS PUBLICATION: WX0 REVISED: 4/8/06 04 TOWSON UNIVERSITY OFFICE OF TECHNOLOGY SERVICES =Shortcut =Advice =Caution Introduction During a WebEx session, the host has the ability
Using Microsoft Word. Working With Objects
Using Microsoft Word Many Word documents will require elements that were created in programs other than Word, such as the picture to the right. Nontext elements in a document are referred to as Objects
Using Parametric Equations in SolidWorks, Example 1
Using Parametric Equations in SolidWorks, Example 1 (Draft 4, 10/25/2006, SW 2006) Introduction In this example the goal is to place a solid roller on a solid wedge. Their relationship will be governed
[Not for Circulation]
![[Not for Circulation]](/thumbs/39/20045725.jpg "[Not for Circulation]")
Using SMART Notebook SMART Notebook is software meant to supplement use with the SMART Board. The software helps users create interactive presentations, and offers a variety of ways to enhance presenting
SMART Notebook: Basics and Application
SMART Notebook: Basics and Application Table of Contents TESS Connection... 3 Version Number... 3 Tour of the Window... 5 The Main Toolbar... 5 The Sidebar... 18 Page Sorter... 19 The Gallery... 23 Searching...
Using Microsoft Project 2000
Using MS Project Personal Computer Fundamentals 1 of 45 Using Microsoft Project 2000 General Conventions All text highlighted in bold refers to menu selections. Examples would be File and Analysis. ALL
If you know exactly how you want your business forms to look and don t mind
appendix e Advanced Form Customization If you know exactly how you want your business forms to look and don t mind detail work, you can configure QuickBooks forms however you want. With QuickBooks Layout
Chapter 1. Creating Sketches in. the Sketch Mode-I. Evaluation chapter. Logon to www.cadcim.com for more details. Learning Objectives
Chapter 1 Creating Sketches in Learning Objectives the Sketch Mode-I After completing this chapter you will be able to: Use various tools to create a geometry. Dimension a sketch. Apply constraints to
PowerPoint 2013: Basic Skills
PowerPoint 2013: Basic Skills Information Technology September 1, 2014 1 P a g e Getting Started There are a variety of ways to start using PowerPoint software. You can click on a shortcut on your desktop
AutoCAD 2009. New Icon Quick Reference
AutoCAD 2009 New Quick Reference Contents Chapter 1 New Quick Reference..................... 1 Toolbars................................... 1 3D Navigation Toolbar........................ 1 CAD Standards
Choosing your Preferred Colours in Windows
Choosing your Preferred Colours in Windows Some people will occasionally find certain text and background combinations difficult to read, while others prefer to always have a certain colour combination
Windows Live Movie Maker
Windows Live Movie Maker What is Windows Live Movie Maker? Windows Live Movie Maker is available on all computers that have Windows 7. Teachers and students use Windows Live Movie Maker to turn videos
Creating Your Own 3D Models
14 Creating Your Own 3D Models DAZ 3D has an extensive growing library of 3D models, but there are times that you may not find what you want or you may just want to create your own model. In either case
ABAQUS/CAE Tutorial: Analysis of an Aluminum Bracket
H. Kim FEA Tutorial 1 ABAQUS/CAE Tutorial: Analysis of an Aluminum Bracket Hyonny Kim last updated: August 2004 In this tutorial, you ll learn how to: 1. Sketch 2D geometry & define part. 2. Define material
Introduction to SketchUp
Introduction to SketchUp This guide is handy to read if you need some basic knowledge to get started using SketchUp. You will see how to download and install Sketchup, and learn how to use your mouse (and
An introduction to 3D draughting & solid modelling using AutoCAD
An introduction to 3D draughting & solid modelling using AutoCAD Faculty of Technology University of Plymouth Drake Circus Plymouth PL4 8AA These notes are to be used in conjunction with the AutoCAD software
Step-by-Step Guide Procurement Card & Travel Reconciliation Expense Reports: Step 4c Attaching Documents by Receipt Store to Individual Expenses
There are three ways to attach documents to an expense report in the Concur Travel & Expense System: scanning, faxing, or using the Receipt Store to attach to individual expenses. Note: Approvers have
Creating a Calendar in CorelDRAW
Creating a Calendar in CorelDRAW Welcome to this tutorial using CorelDRAW! The hardest part about creating a calendar in CorelDRAW is deciding on the size. Once you set the page size, the script will take
Project 1 - Business Proposal (PowerPoint)
Project 1 - Business Proposal (PowerPoint) extraordinary faculty, inquisitive and talented students, a constant striving to build upon and expand historical strengths, the vision to anticipate the future,
SketchUp Instructions
SketchUp Instructions Every architect needs to know how to use SketchUp! SketchUp is free from Google just Google it and download to your computer. You can do just about anything with it, but it is especially
Microsoft Access 2007 Advanced Queries
Microsoft Access 2007 Advanced Queries When you run a query in Microsoft Access 2007, it is not only able to display records, but also able to perform specific tasks and actions based on user defined criteria.
GYM PLANNER. User Guide. Copyright Powerzone. All Rights Reserved. Software & User Guide produced by Sharp Horizon. www.sharphorizon.com.
GYM PLANNER User Guide Copyright Powerzone. All Rights Reserved. Software & User Guide produced by Sharp Horizon. www.sharphorizon.com. Installing the Software The Powerzone gym Planner is a piece of software
Communicate: In Print
Communicate: In Print A simple guide Work areas Communicate: In Print has two different modes in which to edit your documents: Create and Adjust modes. These are easily interchangeable and the toolbars
Canterbury Maps Quick Start - Drawing and Printing Tools
Canterbury Maps Canterbury Maps Quick Start - Drawing and Printing Tools Quick Start Guide Standard GIS Viewer 2 Canterbury Maps Quick Start - Drawing and Printing Tools Introduction This document will
Windows XP Pro: Basics 1
NORTHWEST MISSOURI STATE UNIVERSITY ONLINE USER S GUIDE 2004 Windows XP Pro: Basics 1 Getting on the Northwest Network Getting on the Northwest network is easy with a university-provided PC, which has
Drip Marketing Campaign Manual
Drip Marketing Campaign Manual Released May 2006 Manual for Drip Marketing Campaign: Getting Started 1. Log into www.graphicaldata.com. 2. Hold cursor over the Tools tab. 3. Click on Drip Marketing Campaign.
POWERPOINT BASICS: MICROSOFT OFFICE 2013
University of North Carolina at Chapel Hill Libraries Carrboro Cybrary Chapel Hill Public Library Durham County Public Library POWERPOINT BASICS: MICROSOFT OFFICE 2013 GETTING STARTED PAGE 02 Prerequisites
Interactive Drafting
Interactive Drafting Preface What's New Getting Started Basic Tasks Advanced Tasks Workbench Description Customizing Glossary Index Dassault Systèmes 1994-99. All rights reserved. Preface CATIA Version
Creating 2D Isometric Drawings
1-(800) 877-2745 www.ashlar-vellum.com Creating 2D Isometric Drawings Using Graphite TM Copyright 2008 Ashlar Incorporated. All rights reserved. C62DISO0806. Ashlar-Vellum Graphite No matter how many Top,
3D Modeling in Vectorworks 2009 by Jonathan Pickup. mple
3D Modeling in Vectorworks 2009 by Jonathan Pickup mple 3D Modeling in Vectorworks 2009 by Jonathan Pickup 3D Modeling Vectorworks 2009 Published by Nemetschek North America 2008 Jonathan Pickup Vectorworks
Crop and Frame Your Photos
Crop and Frame Your Photos Paint Shop Pro s crop tool gives you total control over your photo compositions. Cropping allows you to turn busy portraits into professional prints. And when you have a nicely
Excel Tutorial. Bio 150B Excel Tutorial 1
Bio 15B Excel Tutorial 1 Excel Tutorial As part of your laboratory write-ups and reports during this semester you will be required to collect and present data in an appropriate format. To organize and
Signing Documents with Requests for Attachments
DocuSign Quick Start Signer Guide Signing Documents with Requests for Attachments There may be times when you need to provide supporting documentation to the sender. This guide provides information about
Microsoft Word 2010. Quick Reference Guide. Union Institute & University
Microsoft Word 2010 Quick Reference Guide Union Institute & University Contents Using Word Help (F1)... 4 Window Contents:... 4 File tab... 4 Quick Access Toolbar... 5 Backstage View... 5 The Ribbon...
Intermediate Tutorials Modeling - Trees. 3d studio max. 3d studio max. Tree Modeling. 1.2206 2006 Matthew D'Onofrio Page 1 of 12
3d studio max Tree Modeling Techniques and Principles 1.2206 2006 Matthew D'Onofrio Page 1 of 12 Modeling Trees Tree Modeling Techniques and Principles The era of sprites and cylinders-for-trunks has passed
Adding Comments in Microsoft Excel 2003
Adding Comments in Microsoft Excel 2003 Introduction Microsoft Excel has a very useful facility which allows you to add explanatory notes to your worksheet. These can be used, for example, to explain what
Kitchen and Bath Design Tutorial
Adding Cabinets Chapter 5: Kitchen and Bath Design Tutorial This tutorial continues where the Materials Tutorial left off. You should save this tutorial using a new name to archive your previous work.
Microsoft Word 2010. Revising Word Documents Using Markup Tools
Microsoft Word 2010 Revising Word Documents Using Markup Tools Preface Word provides several markup tools that make document collaboration easy. Color coding, highlighting, and the ability maintain multiple
New To Blackboard: Faculty Edition
Bb Abbreviation for Blackboard /ilearn Edit Mode is in the upper-right corner of Bb and must be ON for you to modify your course content. Click the icon to turn edit on or off. The Action Link contains