VALU-BEAM SMI912 Series

Size: px
Start display at page:

Download "VALU-BEAM SMI912 Series"

Transcription

1 VALUBAM MI92 eries AMUR Intrinsically afe D ensors Features MI92 eries sensor, I3R2 current amplifier module (left) and intrinsic safety barrier (right) KMA xia RTL/ Offers economy, performance and reliability in a rugged housing Provides standard limitswitch mounting hole spacing Use approved intrinsically safety barriers and Banner MAMP model I3R2 current trip point amplifier ertified for use in all lasses, roups, and Divisions of hazardous locations as defined by Article 5 of the ational lectrical ode when used approved I.. barriers Provides to 3V dc supply voltage P output Features a light or darkoperate selection switch Available in opposed, polarized and nonpolarized retroreflective, diffuse, convergent, and glass or plastic fiber optic sensing modes Ranges up to 6 m Integral 3pin Ministyle QD fitting; QD cordset required, see page 9 Models LongRange Opposed hortrange Opposed ensing Mode Model Range Voltage 88 nm Infrared OPPOD ffective Beam: 3 mm (.5") 88 nm Infrared OPPOD ffective Beam: 3.5 mm (.) MI9QD mitter MI9RQD Receiver MI9RQD mitter MI9RRQD Receiver 6 m (2') 3 m (') to 3V dc onpolarized Retro Polarized Retro ensing Mode Model Range Voltage 65 nm Visible Red 65 nm Visible Red P RTRO POLAR RTRO MI92LVQD MI92LVAQD 5 mm to 9 m ( to 3') 3 mm to.5 m (' to 5') to 3V dc Performance based on use of a model BRT3 retroreflector ( diameter). Actual sensing range may be more or less than specified, depending on the efficiency and reflective area of the retroreflector used. Models continued on page 2 WARI... ot To Be Used for Personnel Protection ever use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death. These sensors do OT include the selfchecking redundant circuitry necessary to allow their use in personnel safety applications. A sensor failure or malfunction can cause either an energized or deenergized sensor output condition. onsult your current Banner afety Products catalog for safety products which meet OHA, and I standards for personnel protection. Phone: Fax: Web: mail:

2 VALUBAM MI92 eries AMUR Models, continued LongRange Diffuse hortrange Difusse onvergent ensing Mode Model Range Voltage 88 nm Infrared DIFFU 65 nm Visible Red OVRT MI92DQD 76 mm () MI92DRQD 38 mm (5") MI92VQD Focus at: 38 mm (.5") pot ize at Focus:.5 mm (.) to 3V dc Plastic Fiber Optic lass Fiber Optic ensing Mode Model Range Voltage 65 nm Visible Red PLATI FIBR 88 nm Infrared LA FIBR 88 nm Infrared LA FIBR MI92FPQD MI92FQD mitter MI92RFQD Receiver MI92FQD ee performance curves on page 5 ee performance curves on page 6 ee performance curves on page 6 to 3V dc Overview VALUBAM MI92 eries sensors are designed for intrinsically safe operation in hazardous atmospheres. They are certified by Factory Mutual Research, A, and KMA as being intrinsically safe when used approved intrinsic safety barriers. ens. Regulator L.. Brown to 3V dc MI92 eries sensors may be wired for either two or threewire currentsinking operation. In the threewire hookup, which requires two intrinsicsafety barriers, the sink current is 5 ma. The twowire hookup, which requires one barrier, sinks ma (OFF state) and 2 ma (O state). MI92 eries sensors feature rugged, encapsulated construction, along adjustable sensitivity and switchable light or dark operate. They also include Banner's exclusive Alignment Indicating Device system, which lights an indicator LD whenever the sensor sees its modulated light source, and pulses at a rate proportional to the received light signal strength. Receiver Amp Demodulator D.. D urrent ense Oscillator 27 Ohms mitter Figure. Functional schematic Black 36V Blue Output ommon Intrinsic safety barriers and current trip point amplifier model I3R2 are also available (see pages 9 and ). Phone: Fax: Web: mail:

3 VALUBAM MI92 eries AMUR Installation otes WARI... xplosion Hazard Do not disconnect equipment unless power has been switched off or the area is known to be nonhazardous. FM ITALLATIO. Barriers must be installed in accordance manufacturer's instructions. 2. Barrier entity parameters must meet the following requirements: Voc or Vt Vmax a i cable Isc or It I max La Li Lcable 3. Maximum nonhazardous area voltage must not exceed 25V.. For guidance on installation, see /IA RP2.6, Installation of Intrinsically afe Instrument ystems for Hazardous (lassified) Locations. 5. The sensors are suitable for installation out barriers in lass I Div. 2 roups A, B,, D; lass II Div. 2 roup ; and lass III Div. 2, when installed in (or through the wall of) a suitable enclosure provision for connection of rigid metal conduit per the ational lectrical ode, as acceptable to the local inspection authority having jurisdiction. A ITALLATIO. Barriers must be installed in accordance manufacturer's instructions. 2. Barrier entity parameters must meet the following requirements: Voc Vmax a i cable Isc I max La Li Lcable 3. Maximum nonhazardous area voltage must not exceed 25V.. Install in accordance anadian lectrical ode, Part I. 5. The sensors are suitable for installation out barriers in lass I Div. 2 roups A, B,, D when installed in (or through the wall of) a suitable enclosure provision for connection of rigid metal conduit per the anadian lectrical ode, as acceptable to the local inspection authority having jurisdiction. In Div. 2 installations (out barriers), observe warning at left. 6. If barriers Volt/Ohm parameters are used, the following parameters shall apply: One inglehannel Barrier ystems one 28 V (max), 3 Ω (min) Two inglehannel Barrier or One Dualhannel ystems two 28 V (max), 6 Ω (min) one 28 V (max), 3 Ω (min) and one V (max), 5 Ω (min) one 28 V (max), 3 Ω (min) and one 28 V diode return ensor ntity Parameters Vmax (Ui) 3V dc Imax (li) ma Pi 75 mw i = µf Li = mh Phone: Fax: Web: mail:

4 VALUBAM MI92 eries AMUR upply Voltage and urrent Output onfiguration Output Rating Output Response Time ensing Beam Repeatability Adjustments Indicators onstruction nvironmental Ratings onnections pecifications ensor only: requires to 3V dc, 25 ma maximum Division use ( barriers): requires a minimum system supply voltage of volts (see hookup information and hookup diagrams). urrent sinking P opencollector transistor Threewire hookup sinks 5 ma maximum, continuous ( to 3V dc) Twowire hookup sinks ma (OFF state) and 2 ma (O state), to 3V dc. Outputs are shortcircuit protected. Opposedmode receivers: 8 milliseconds O/ milliseconds OFF; independent of signal strength All other models: milliseconds O and OFF millisecond delay on powerup (output does not conduct during this time). Infrared (88 nm) or visible red (65 nm), depending on model Opposed mode:. millisecond All other modes:.3 milliseconds Repeatability is independent of signal strength. Light/Dark Operate select switch on rear of sensor ensitivity control on rear of sensor allows precise gain setting (turn clockwise to increase gain) ensors include Banner's exclusive Alignment Indicating Device (D ) system, which lights a topmounted red indicator LD whenever the sensor sees its modulated light source, and pulses the LD at a rate proportional to the received light signal strength. Housing: reinforced PBT, totally encapsulated Lenses: molded acrylic Hardware: stainless steel Meets MA standards, 2, 3, 3,,, 2, and 3, I IP66 upplied integral 3pin Ministyle QD fitting; requires cordset model MB (see Accessories), purchased separately. Operating onditions Temperature: 2 to 7 ( to 58 F) Max. Relative Humidity: 5 (noncondensing) ertifications xia Application ote KMA RTL/ pecial onditions for afe Use: Parts of the enclosure are nonconducting and may generate an ignitioncapable level of D. leaning of the equipment shall be done only a damp cloth. KMA: A: Approvals 5, 52, 528 KMA o. 3AT II 2 x ib II T5 Ta #2M987, 5792, 23M987, xia L I DIV P AD L I DIV 2 P AD FM: 36, 36, 38 I.. L I, II, III DIV P A,.I. L I, II, III DIV 2 P AD, Phone: Fax: Web: mail:

5 VALUBAM MI92 eries AMUR Performance urves LongRange Opposed hortrange Opposed onpolarized Retro Polarized Retro xcess ain. m. MI9QD & MI9RQD. m.. m. m MI9RQD & MI9RRQD. m. MI92LVQD. m. " reflector (BR T) BR TT tape. m. MI92LVAQD. m. m m m BRT3 retroreflector m reflector (BR T3) m m m m 5 mm mm 5 mm 3 mm 2 mm mm 5 mm mm 5 mm mm 2 mm 3 mm 5 mm mm 5 mm 5 mm mm 5 mm 5 mm 5 mm Beam Pattern 5 m 5'.6 m 2' MI9QD/MI9RQD 3 m ' 5 m 5' MI9RQD/ MI9RRQD.2 m.8 m ' 6' MI92LVQD 2 m m 6 m 9' 5' 2' MI92LVAQD 6 m 2' 2. m 8' BRT3 RFLTOR BRT3 RFLTOR m 2 m 3 m m 3' 6' 9' 2' Performance based on use of a model BRT3 retroreflector ( diameter). Actual sensing range may be more or less than specified, depending on the efficiency and reflective area of the retroreflector used. 8 m 27' 75 m 25' 3. m ' m 5 m 5' " " LongRange Diffuse hortrange Diffuse onvergent Plastic Fiber Optic xcess ain Beam Pattern Diffuse mode performance based on use of 9% reflectance white test card A I mm. mm. MI92DQD mm. mm.. mm. mm. MI92DRQD mm. mm. PIT26U o Lenses mm. Range is based on 9% reflectance white test card. mm. Range is based on 9% reflectance white test card PIT6U o Lenses PBT26U fiber mm Range is based on 9% reflectance white test card mm MI92VQD onvergent Mode mm mm mm mm MI92FPQD egc Opposed sm92c/sma92c.eps mode plastic fibers mm MI92FPQD Diffuse mode plastic fiber mm. PBT6U fiber PIT6U Lenses mm mm 9.5 mm 3 mm 6.5 mm 9.5 mm 3 mm 6.5 mm 2. mm.6 mm.8 mm 6.5 mm 3 mm 9.5 mm 6.5 mm 3 mm 9.5 mm.8 mm.6 mm 2. mm 5 mm 3 mm 5 mm 5 mm 3 mm 5 mm mm mm 3. MI92DQD 6 mm MI92DRQD MI92VQD onvergent Mode 5 mm. " 7.5 mm. 3 mm 5 mm 3 mm. 5. mm. 6 mm 2 9" 5 mm. MI92FPQD Opposed Mode PIT26U 5 mm 22.5 mm.9" 6 mm 2 3 mm 6 mm 2. MI92FPQD Diffuse Mode 76 mm 3 5" 3.".75".5".25".25".5".75".75".5".25".25".5".75".9".....9" BP sm92/sma92.eps. PIT6U mm PBT26U PBT6U 3. mm. 5" ".".5".5".".5" 37.5 mm.5" Phone: Fax: Web: mail:

6 VALUBAM MI92 eries AMUR Performance urves xcess ain Beam Pattern xcess ain Beam Pattern lass Fiber Optic, Opposed Mode mm.. m. IT23 and L9 Lenses IT3 fibers mm. m MI9FQD MI9RFQD Opposed mode glass fibers mm MI9FQD MI9RFQD IT23 and L6F Lenses m IT23 fibers mm m 5 mm 5 mm 3 mm 2 mm mm mm 2 mm 3 mm MI9FQD/MI9RFQD mm MI9FQD/ MI9RFQD 2.5 m 8' IT23 2 mm IT23 fibers L9 Lenses 5. m 6' 3 mm 7.5 m 2' IT3 mm. m 32' " " 5 mm 2.5 m ' IT23 fibers L6F Lenses lass Fiber Optic, Opposed or Diffuse Mode Diffuse mode performance based on use of 9% reflectance white test card A I. m. MI92FQD mm. IT3 fibers mm. MI92FQD L9 lens and BT3 fibers. m. BT3 fibers Retroreflective model BRT3 target MI92FQD Opposed mode glass fibers mm m IT23 fibers L6F lens and BT3 fibers Diffuse mode Range is based on 9% reflectance white test card BT23 fibers mm m 5 mm 5 mm mm 5 mm w/l9 lens 5 mm mm 5 mm 2. mm.8mm.2 mm.6 mm 5 mm.6 mm.2 mm.8 mm MI92FQD mm MI92FQD.25 ' m ' BT3 IT23 fibers 2 mm 2.5 m 8' 3 mm 3.75 m 2' IT23 fibers w/l6f lens BT3 fiber, retroreflective mode, BRT3 reflector MI92FQD Diffuse Mode mm 5. m 6' BT23 " " 5 mm 6.25 m 2'.".75".5".25".25".5".75". mm. mm. mm. mm 2. mm 7.5 mm. 5. mm mm.9" 3. mm.." 37.5 mm.5" 36.6 mm (.) LD Indicator 35.6 mm (.) Lens enterline 5.8 mm (2.") 39. mm (.5) Dimensions Light/Dark Operate elect (L.O. = W, D.O. = W) ensitivity ontrol (Turn W to Increase).5 mm (#) crew learance (2) OT: ontrol potentiometers are behind cover screws; remove screws to access controls 7.8 mm (.7") 26.7 mm (.5") M3 x.5 Thread Hex ut upplied 5.6 mm (.2) Ministyle Quickdisconnect 25. mm (.") Phone: Fax: Web: mail:

7 VALUBAM MI92 eries AMUR Hookups MI92 eries sensors are certified intrinsically safe OLY when used certified energylimiting intrinsically safe barriers. Banner does not manufacture such barriers; however, our applications engineers can refer you to suppliers of certified barriers that will interface Banner sensors. MI92 eries sensors may be wired using Banner urrent Amplifier ontrol Module I3R2 (see page 9). ote from the hookup diagrams (page 8) that the installation may be made either a single barrier (2wire hookup) or a double barrier (3wire hookup). mitteronly units (MI9QD, RQD, and FQD) use the 2wire hookup; all other models use either 2 or 3wire hookup. In the 2wire configuration, the sensor will act as a current sink, drawing less than ma in the OFF state and more than 2 ma in the O state. The user must provide a current sensing device ( current sensor in the diagram) to convert the current to a logic level. In the 3wire configuration, the output may be used directly to control loads of less than 5 ma. In selecting the barrier, it is important to consider the barrier's resistance. The sensor must have at least volts across the brown and blue power leads for proper operation, and the barrier will cause a voltage drop due to its resistance. The formula that determines how much resistance is allowed is: R = (supply voltage volts) If the supply voltage is 2V dc, then the maximum resistance is 56 ohms. If the supply voltage is 8V dc, then the maximum resistance is 32 ohms. This includes the resistance of any current sensing device used (in the 2wire configuration), so the barrier resistance must be further reduced by the current sensor resistance. ote that, in the 3wire hookup, the positive load barrier is in series the load. This will result in an apparent saturation voltage of the output that is higher than the sensor output by the amount of I x R (current times resistance) drop through the barrier. A positive input barrier is required for both supply and for load. The sensor s blue (negative supply) lead is normally connected to the ground terminal of the barrier. The user is responsible for proper installation and maintenance of this equipment, and must conform the certification requirements relating to barriers and to maximum allowable capacitance and inductance of the field wiring. If in doubt about these requirements, our applications engineers can refer you to the appropriate authority. Phone: Fax: Web: mail:

8 VALUBAM MI92 eries AMUR Hookups, continued afe Area Hazardous Area Barriers not required for Div. 2 3V dc (reference OT #5 for FM & A on page 3) 3Wire Hookup Operating Voltage 83V dc 25 ma dc IPUT L O A D I 5 ma max. onnection to ontrol Room quipment should not use or generate more than 25V I V I.. OUT BLAK OUT BROW Blue 3 2 MI9 eries ensor Bottom View (colors shown are for mating cordset MB32) arth round (less than ohm) Busbar OT: mitters have no output connection (no connection to black wire) afe Area Barriers not required for Div. 2 3V dc max. (Reference OT #5 for FM & A on page 3) 2Wire Hookup Operating Voltage 83V dc 25 ma dc Input ma (OFF tate) 2 ma (O tate) URRT ensor I I.. V Barrier OUT 2 BROW Blue BLAK 3 2 Hazardous Area MI9 eries ensor Bottom View (colors shown are for mating cordset MB32) arth round (less than ohm) BUBAR Phone: Fax: Web: mail:

9 VALUBAM MI92 eries AMUR Accessories QuickDisconnect (QD) ordsets All MI92 eries sensors require a 3conductor quickdisconnect cordset. ordset is not included the sensor and must be ordered separately. tyle Model Length Dimensions Pinout 3pin Ministyle traight MB36 MB32 MB33 2 m (6.5') m (2') 9 m (3') 6 mm max. 7/86U2B ø 28 mm max. 3 = Brown 3 = Blue = Black Model I3R2 urrent TripPoint Module Description elfcontained module converts the MI92 sensor s current output signal to a trip point switch. PDT electromechanical relay switches loads that draw up to 5 amps. The PT solidstate relay can switch a D load of up to 3V dc, max.; 2 ma max. Powered by either 53V ac or 225V ac. upplies dc power to operate a single sensor or both the emitter and receiver of one MI eries opposedmode sensor pair. The sensor's input to the I3R2 is protected against short circuits. Builtin circuit diagnostics indicate an input overload by flashing an LD status light. Module has two isolated output switches, a 5amp rated PDT electromechanical relay and a solidstate transistor switch used for logiclevel interfaces. May be ordered either alone or as a part of a kit (see page ). Mini traight upply Voltage urrent TripPoint Module pecifications 5 to 3V ac or 2 to 25V ac, 5/6 Hz (8 VA) Output onfiguration PDT electromechanical relay: ontact rating: 25V ac maximum, 2V dc maximum, 5 amps maximum (resistive load), / HP at 2V ac. Install transient suppressor (MOV) across contacts which switch inductive loads. Min. load: 2V dc,.a. losure time: milliseconds maximum. Release time: milliseconds maximum. Maximum switching speed: 2 operations/second. Mechanical life: 2,, operations olidstate dc relay: PT opticallycoupled transistor; 3V dc maximum, 2 ma maximum. mitter Power 2V dc at 25 ma maximum available at module pin #3 Inputs Trip point for output "OFF": ma Trip point for output "O": 2 ma Trip point range for input overload indication: 3 ma I 8 ma Indicators tatus Indicators for OUTPUT O and IPUT overload/short onstruction Housing: rugged polyphenylene oxide (PPO ). x 2. x tandard roundpin pole base. Use R socket or equivalent. Operating onditions Temperature: to 5 (32 to 22 F) Phone: Fax: Web: mail:

10 VALUBAM MI92 eries AMUR Model (Barrier Only) Barrier Description Accessories, continued Kit Model IB inglechannel intrinsically safe barrier I2BK I2B Dualchannel intrinsically safe barrier (typically used in opposedmode applications) Intrinsic afety Barriers I2BK2 Kit Description Includes I3R2 current amplifier, one R socket, one DIrail mount, one singlechannel intrinsically safe barrier Includes I3R2 current amplifier, one R socket, one DIrail mount, one dualchannel intrinsically safe barrier urrent TripPoint Module Hookups Hookup for OpposedMode mitters and Receivers afe Area Hazardous Area A upply Relay Output 5 amp contacts 5 to 3V ac 2 to 25V ac I3R2 Input: ma (OFF tate) 2 ma (O tate) Aux. Input ommon OPTOoupler Output: 2 ma max. I I arth round (less than Ω) Dual Barrier I.. Busbar OUT OUT Brown Brown Black 3 3 Blue Blue Bottom view of cordset connector on sensor (colors shown are for mating cordset model MI32) MI eries mitter MI eries Receiver MITTR RIVR mitter models: MI9QD, MI9RQD, MI9FQD Receiver models: MI9RQD, MI9RRQD, MI9RFQD Hookup for Other MI92 eries ensors afe Area afe Area Hazardous Area A upply Relay Output 5 amp contacts Relay Output 5 amp contacts 5 to 3V ac A 5 to 3V ac upply 2 to 25V ac 2 to 25V ac I3R2 I3R2 Input: ma (OFF tate) Input: 2 ma (O tate) ma (OFF tate) 2 ma (O tate) Aux. Input Aux. Input ommon ommon OPTOoupler Output: 2 ma max. OPTOoupler Output: 2 ma max. I Hazardous Area Black Black I OUT Brown 3 V OUT I.. Brown Blue 3 V I.. I.. BlueBottom view of cordset connector on sensor Barrier I.. Bottom view (colors of cordset shown are for mating connector cordset on sensor model MB32) Barrier (colors shown are for mating Busbar cordset model MB32) Busbar BAR MI92 BAR RI MI92OR RI OR arth round (less than Ω) arth round (less than Ω) Phone: Fax: Web: mail:

11 VALUBAM MI92 eries AMUR Accessories, continued Mounting Brackets Bracket dimensions are available online at Banner ngineering website. MB3MM 3 mm 2gauge, 3 stainless steel, rightangle mounting bracket a curved mounting slot for versatile orientation learance for M6 (/) hardware 3 mm swivel bracket MB3A 3 mm rightangle mounting bracket a curved mounting slot for versatile orientation 2gauge stainless steel learance for M6 (/) hardware MB3 Black reinforced thermoplastic polyester Includes stainless steel mounting and swivel locking hardware Phone: Fax: Web: mail:

VALU-BEAM SMI912 Series

VALU-BEAM SMI912 Series VALU-BAM MI92 eries Intrinsically safe dc sensor MI92 eries sensor, I3R2 current amplifier module (left) and intrinsic safety barrier (right) Offers economy, performance and reliability in a rugged housing

More information

VALU-BEAM Sensors. VALU-BEAM sensors are not suitable for use in personnel safety applications! See WARNING on inside front cover of catalog.

VALU-BEAM Sensors. VALU-BEAM sensors are not suitable for use in personnel safety applications! See WARNING on inside front cover of catalog. VLU-BM ensors (xceptions noted) VLU-BM ensors 92 eries with olid-tate s........... 328 95 eries with lectromechanical Relay... 338 99 eries with Built-in 6-Digit Totalizing ounter.. 348 M92 eries ntrinsically

More information

VALU-BEAM 915 Series Sensors

VALU-BEAM 915 Series Sensors VLU-BM 95 eries ensors With lectromechanical VLU-BM 95 eries Features Models available for: - 2 to 28V - 9 to 3V ac - 2 to 25V ac PDT electromechanical relay output is rated for up to 5 amps switching

More information

MULTI-BEAM LS10 Light Screen System

MULTI-BEAM LS10 Light Screen System For Sensing Small Parts at High Speeds Emitter and receiver pair produce a strobed array of modulated light beams to produce a light screen Simple, economical and highly reliable means of sensing small

More information

For the latest technical information about this product, including specifications, dimensions, and wiring, see www.bannerengineering.

For the latest technical information about this product, including specifications, dimensions, and wiring, see www.bannerengineering. VALU-BEAM 92 Series AC- and DC-powered sensors with solid-state outputs For the latest technical information about this product, including specifications, dimensions, and wiring, see www.bannerengineering.com

More information

T30 Sensors DC-Voltage Series

T30 Sensors DC-Voltage Series T3 ensors D-Voltage eries nstruction Manual elf-ontained, D-Operated ensors Featuring Z-BM technology, the specially designed optics and electronics provide reliable sensing without the need for adjustments

More information

WORLD-BEAM QS30 Sensors

WORLD-BEAM QS30 Sensors Datasheet High-Power Opposed-Mode Sensors Infared beam with high excess gain range of over 213 m (700 ft) Excellent noise immunity Excellent for applications ere high sensing power is required due to long

More information

LED...A70..4-..Q Series Sealed High-Intensity

LED...A70..4-..Q Series Sealed High-Intensity LED...A70..4-..Q Series Sealed High-Intensity Area Lights High-Power Lighting for use with PresencePLUS and Other Vision Systems Features Rugged, waterproof housing, rated IEC IP68 Compact area light for

More information

SENSORS. Miniature Sensors - S3Z. Advanced line of miniature Asian style of photoelectric sensors. 40-300 mm background suppression

SENSORS. Miniature Sensors - S3Z. Advanced line of miniature Asian style of photoelectric sensors. 40-300 mm background suppression Advanced line of miniature Asian style of photoelectric sensors 4-3 background suppression.7 m proximity, 15 with narrow beam 4 m polarized retroreflective 3 m LASER through beam Standard 3-wire output

More information

D12 Series Fiber Optic Sensors. Product Line Catalog. D12 Expert. D12 Standard / High Speed. D12 High Power. D12 AC-Coupled. Accessories.

D12 Series Fiber Optic Sensors. Product Line Catalog. D12 Expert. D12 Standard / High Speed. D12 High Power. D12 AC-Coupled. Accessories. D2 eries Fiber Optic ensors Product Line atalog Accessories D2 xpert D2 A-oupled D2 High Power D2 tandard / High peed Printed in UA P/ 365956A D2 eries Fiber Optic ensors D2 A-oupled D2 High Power Accessories

More information

Miniature High-Resolution Registration Mark Sensor White LED AUTOSET Remote Setup Option

Miniature High-Resolution Registration Mark Sensor White LED AUTOSET Remote Setup Option REGISTRATION MARK SENSORS MARK EYE PRO 2 Miniature High-Resolution Registration Mark Sensor White LED AUTOSET Remote Setup Option Registration Mark Photoelectric Sensors 2-115 High-Resolution Registration

More information

Technical Data. Dimensions

Technical Data. Dimensions 0102 Model Number Features 15 mm quasi flush Usable up to SIL2 acc. to IEC 61508 Accessories BF 30 Mounting flange, 30 mm V1-G-N-2M-PUR Female cordset, M12, 2-pin, NAMUR, PUR cable V1-W-N-2M-PUR Female

More information

sensors Miniature Sensors - S100 The universal miniature photoelectric sensor

sensors Miniature Sensors - S100 The universal miniature photoelectric sensor Miniature Sensors - S1 The universal miniature photoelectric sensor Two threaded front mounting holes Two slotted rear mounting holes Anti-tampering sensor (no adjustment) Standard optic functions and

More information

Compact Sensors - S8 Series. Compact size and high performance for the most challenging detection applications

Compact Sensors - S8 Series. Compact size and high performance for the most challenging detection applications Compact size and high performance for the most challenging detection applications Compact dimensions (14x42x25 mm) Background suppression for transparent and shiny objects High speed contrast sensor up

More information

VALU-BEAM Sensors. Product Line Specifications. Rugged, self-contained photoelectric sensors for industrial applications

VALU-BEAM Sensors. Product Line Specifications. Rugged, self-contained photoelectric sensors for industrial applications VALU-BAM ensors Product Line pecifications Rugged, self-contained photoelectric sensors for industrial applications conomy, performance, and durability in a family of rugged, self-contained sensors for

More information

E3Z. Ordering Information. Photoelectric Sensor with Built-in Amplifier. Compact Sensor Offers Long Sensing Distance and Superior Noise-Immunity

E3Z. Ordering Information. Photoelectric Sensor with Built-in Amplifier. Compact Sensor Offers Long Sensing Distance and Superior Noise-Immunity Photoelectric Sensor with Built-in Amplifier Compact Sensor Offers Long Sensing Distance and Superior Noise-Immunity H Photo-IC provides long sensing distance: 15 m for through-beam, 4 m for retroreflective,

More information

M18-4 Stainless Steel 18 mm Barrel Sensors

M18-4 Stainless Steel 18 mm Barrel Sensors M8-4 Stainless Steel 8 mm Barrel Sensors Datasheet Next Generation of Self-Contained DC-Operated Sensors Complete family of sensors, all housed in the popular 8 mm threaded metal barrel Chemically robust

More information

Color Mark Sensor with Red or Green LED E3S-VS

Color Mark Sensor with Red or Green LED E3S-VS Color Mark Sensor with Red or Green LED Rugged IP67 Color Mark Sensor 1 ms response time Detects a wide variety of color marks PNP or NPN output ls Light-on/ Dark-on operation, wire selectable Vertical

More information

Cross-beam scanning system to detect slim objects. 100 mm 3.937 in

Cross-beam scanning system to detect slim objects. 100 mm 3.937 in 891 Object Area Sensor General terms and conditions... F-17 Related Information Glossary of terms... P.1359~ Sensor selection guide...p.831~ General precautions... P.1405 PHOTO PHOTO Conforming to EMC

More information

Sensing method Appearance a Connection o method Sensing distance Model NPN output PNP output Through-beam Pre-wired (see note 3) Connector.

Sensing method Appearance a Connection o method Sensing distance Model NPN output PNP output Through-beam Pre-wired (see note 3) Connector. Photoelectric Sensor with Built-in Amplifier Photoelectric Sensor with built-in amplifier is applicable to a wide variety of lines and ensures a longer sensing distance than any other model. User-friendly

More information

Clear Glass Sensor. Ordering Information E3S-CR67/62. Optimum Sensor for Detecting Transparent Glass and Plastic Bottles

Clear Glass Sensor. Ordering Information E3S-CR67/62. Optimum Sensor for Detecting Transparent Glass and Plastic Bottles Clear Glass Sensor Optimum Sensor for Detecting Transparent Glass and Plastic Bottles E3S-CR67/62 Retroreflective Sensor smoothly detects 5-mm gaps. Detects transparent bottles that have a lens effect.

More information

Thru-Beam 80 to 320 mm 0.05 to 0.08 mm

Thru-Beam 80 to 320 mm 0.05 to 0.08 mm Series 7069A Fiber Optics The 7069A coupled with the appropriate cable forms a fiber optic sensor controller system capable of detecting objects as small as 0.01mm dia. and color marks on backgrounds of

More information

Inductive sensor NI10-M18-Y1X-H1141

Inductive sensor NI10-M18-Y1X-H1141 ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Threaded barrel, M18 x 1 Chrome-plated brass DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6 (NA- MUR) M12

More information

Technical data. General specifications. Indicators/operating means. 30 Hz Multiplex operation 30 Hz / n, n = number of sensors, n 5

Technical data. General specifications. Indicators/operating means. 30 Hz Multiplex operation 30 Hz / n, n = number of sensors, n 5 Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service program ULTRA 000 programmable switch outputs Hysteresis

More information

Ferrostat Speed Sensor Series DSF Explosion Proof Versions EEx

Ferrostat Speed Sensor Series DSF Explosion Proof Versions EEx Ferrostat Speed Sensor Series DSF Explosion Proof Versions EEx DSF..10.**.HV Ex ATEX Operating Instructions 374E-64368 Valid from lot nr. 0103 General Function Use in potentially explosive environment

More information

Universal Voltage Terminal Photoelectric E3JM

Universal Voltage Terminal Photoelectric E3JM Universal Voltage Terminal Photoelectric Universal AC/DC Photoelectric Sensor with Built-in Timer Easy-to-wire terminal block Built-in timer offers selectable ON-delay, OFF-delay and one-shot Relay or

More information

Long sensing range. Most suitable for conveyor lines and parking lot applications. 10 m 32.808 ft (Red LED)

Long sensing range. Most suitable for conveyor lines and parking lot applications. 10 m 32.808 ft (Red LED) NX SERIES Compact Multi-voltage Photoelectric Power Supply Built-in Multi-voltage photoelectric sensor usable worldwide Conforming to ow Voltage and EMC Directive Multi-voltage The NX series can operate

More information

660 nw, 10 mw, 60 degree fan angle, Class II CDRH, 0.5 m cable with flying leads

660 nw, 10 mw, 60 degree fan angle, Class II CDRH, 0.5 m cable with flying leads Datasheet Laser line uniformity up to 95% on 100% of the line External user focus mechanism Photo feedback for optimal power stability up to 500 khz Dynamic line balancing for repeatable performance Robust

More information

Smart Sensing Solutions Since 1954

Smart Sensing Solutions Since 1954 Smart Sensing Solutions Since 1954 X-tremely High Speed Photoelectric Registration Sensor 800-237-0946 ttco.com 813-886-4000 Photoelectric Registration Sensor The SMARTEYE X-MARK TM is the fastest, most

More information

Isolating Barriers for our sensors A5S1 in Ex-areas Series D461

Isolating Barriers for our sensors A5S1 in Ex-areas Series D461 D46 Isolating Barriers for our sensors A5S1 in Ex-areas Series KEY FEATURES ATEX / IECEx certified, also approval for UL / CSA and EAC (Russia, Kazakhstan and Belarus Customs Union) Protection grade Ex

More information

R4D0-FB-IA* FieldBarrier. Features. Assembly. Function. Connection IN + - S OUT ... ... Spur 2. Spur 1. Zone 1. Zone 0

R4D0-FB-IA* FieldBarrier. Features. Assembly. Function. Connection IN + - S OUT ... ... Spur 2. Spur 1. Zone 1. Zone 0 FieldBarrier Features Assembly 8... 12 outputs Ex ia IIC, FISCO and Entity Advanced fault isolation and diagnostics at the spur FieldBarrier in Zone 1/Div. 2 Instruments in Zone 0...1/Div. 1 For FOUNDATION

More information

Laser diffuse reflection light scanner with background suppression. Dimensioned drawing

Laser diffuse reflection light scanner with background suppression. Dimensioned drawing Specifications and description HRTL 3B Laser diffuse reflection light scanner with background suppression Dimensioned drawing We reserve the right to make changes DS_HRTL3B_en.fm en 01-2010/12 50114049

More information

DORMA MODEL PS-406BB POWER SUPPLY INSTALLATION INSTRUCTIONS

DORMA MODEL PS-406BB POWER SUPPLY INSTALLATION INSTRUCTIONS Features: INSTALLATION Install in accordance with NFPA 70. DORMA MODEL PS-406BB POWER SUPPLY INSTALLATION INSTRUCTIONS Up to 1.95 Amps Load Capacity Class 2 Rated Outputs Overload, Over Voltage, and Short

More information

0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N

0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 55 Series - General purpose relays 7-10 A Features 55.12 55.13 55.14 Printed circuit mount, general purpose 2, 3 & 4 Pole relays 55.12-2 Pole 10 A 55.13-3 Pole 10 A 55.14-4 Pole 7 A AC coils & DC coils

More information

MCR1900 Media Converter 19-Slot Chassis

MCR1900 Media Converter 19-Slot Chassis MCR1900 Media Converter 19-Slot Chassis Installation Guide Part #5500304-11 Copyright Statement This document must not be reproduced in any way whatsoever, either printed or electronically, without the

More information

2M IR Mini Dome Quick Installation Guide

2M IR Mini Dome Quick Installation Guide 2M IR Mini Dome 2M IR Mini Dome Quick Installation Guide Please follow the installation steps below to set up 2M IR Mini Dome IP Camera. Check the package contents against the list below. See P.1 Physical

More information

SENSORS. Fiber Optic Sensors - S70. Advanced fiber optic amplifiers for high speed and low contrast applications

SENSORS. Fiber Optic Sensors - S70. Advanced fiber optic amplifiers for high speed and low contrast applications Fiber Optic Sensors - S7 Advanced fiber optic amplifiers for high speed and low contrast applications DIN rail mountable models with dual digital displays speed models: 2 μs...5 ms Super high speed models:

More information

T-SERIES INDUSTRIAL INCLINOMETER ANALOG INTERFACE

T-SERIES INDUSTRIAL INCLINOMETER ANALOG INTERFACE T-SERIES INDUSTRIAL INCLINOMETER ANALOG INTERFACE T-Series industrial inclinometers are compact high performance sensors used to determine inclination in roll and pitch axes with excellent precision and

More information

JNIOR. Overview. Get Connected. Get Results. JNIOR Model 310. JNIOR Model 312. JNIOR Model 314. JNIOR Model 410

JNIOR. Overview. Get Connected. Get Results. JNIOR Model 310. JNIOR Model 312. JNIOR Model 314. JNIOR Model 410 The INTEG is an Ethernet I/O (digital, analog) device that monitors and controls a small set of process signals. functions as both basic I/O for integration with another application or system AND as a

More information

Adjustment functions for both span and shift have been incorporated

Adjustment functions for both span and shift have been incorporated SENSORS FOR SERIES LED Type Wafer Alignment Sensor FX-0-F FT-F9 FD-F7 EX-F70/F60 M SH-7 FD-L4 M-DW The use of a safe LED light beam now allows for high precision detection with a resolution of 0!m (.8

More information

Fiber Optic Selector Guide for Analog & Digital Data Links, Contact Closures & Multiplexers

Fiber Optic Selector Guide for Analog & Digital Data Links, Contact Closures & Multiplexers Fiber Optic Selector Guide for Analog & Digital Data Links, Contact Closures & Multiplexers Analog Data Links Multi-Channel Contact Closures Multiplexers Digital Data Links - Contact Closures Power Supply

More information

Triple Waveband Infra-Red Flame Detection

Triple Waveband Infra-Red Flame Detection Minerva S200PLUS Ex ia Intrinsically Safe & Ex d Flameproof Solar Blind Flame Detectors Triple Waveband Infra-Red Flame Detection Key Features Unrivalled black body rejection over a wide range of source

More information

SYSTEM 4C. C R H Electronics Design

SYSTEM 4C. C R H Electronics Design SYSTEM 4C C R H Electronics Design SYSTEM 4C All in one modular 4 axis CNC drive board By C R Harding Specifications Main PCB & Input PCB Available with up to 4 Axis X, Y, Z, A outputs. Independent 25

More information

Capacitive Prox E2K-X

Capacitive Prox E2K-X Capacitive Prox Threaded, Cylindrical Sensor Detects Metallic and Non-metallic Objects Permits non-contact detection of metallic and non-metallic objects such as glass, wood, water, oil and plastic Allows

More information

E2K-L. Liquid Level Sensor. Applications. Ordering Information

E2K-L. Liquid Level Sensor. Applications. Ordering Information Liquid Level Sensor Installation on pipes. Sensing by means electrostatic capacity and is not influenced by the color of the pipe or liquid. Available in 8 to mm dia. and to mm dia. models to enable sensing

More information

LED..S50L.. High-Intensity Spot Light

LED..S50L.. High-Intensity Spot Light Datasheet For use with PresencePLUS and other vision systems For the latest technical information about this product, including specifications, dimensions, and wiring, see www.bannerengineering.com. Low-cost,

More information

MasterINTERFACE 39 Series - Relay interface modules

MasterINTERFACE 39 Series - Relay interface modules MasterINTERFACE 39 Series - Relay interface modules Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy

More information

Throughbeam photoelectric sensors. Dimensioned drawing. Electrical connection

Throughbeam photoelectric sensors. Dimensioned drawing. Electrical connection Specifications and description Leuze electronic LS 78 Throughbeam photoelectric sensors Dimensioned drawing 180m 10-30 V DC! Voltage range from 12 30VDC with NPN, PNP and/or relay outputs! Light/dark switching!

More information

Tubular Analog model resolution: 0,5 mm (SLOW mode), 1 mm (FAST mode) Right angle Repeatibility: 0,7 mm Vdc

Tubular Analog model resolution: 0,5 mm (SLOW mode), 1 mm (FAST mode) Right angle Repeatibility: 0,7 mm Vdc Ultrasonic sensors for high precision detection of clear and transparent objects Clear object detection, inspection on transparent or highly reflective film and liquid level measurement Standard M18 tubular

More information

LM10. Micro Laser Displacement Sensor. The LM10 makes laser sensors super easy to use! New circuitry lowers costs

LM10. Micro Laser Displacement Sensor. The LM10 makes laser sensors super easy to use! New circuitry lowers costs 857 Micro Sensor General terms and conditions... P.1 Related Information Glossary of terms / General precautions... P.1019 / P.1027 Sensor selection guide... P.11~ / P.833~ About laser beam... P.1025 ~

More information

Pressure transmitter (2 wire) / switch for continuous or On/Off Control

Pressure transmitter (2 wire) / switch for continuous or On/Off Control transmitter (2 wire) / switch for continuous or On/Off Control Indication, monitoring, transmitting and continuous or On/Off control in one device Output signal 4...20 ma, 2-wire for continuous control

More information

Product Data. Model 575 Series Submersible Level Transmitters ELECTRONIC PRESSURE MEASUREMENT PRODUCTS DESCRIPTION FEATURES APPLICATIONS

Product Data. Model 575 Series Submersible Level Transmitters ELECTRONIC PRESSURE MEASUREMENT PRODUCTS DESCRIPTION FEATURES APPLICATIONS EPP - 1 DECRIPTION The odel 575 is used in general water/wastewater applications. The transmitter is offered in a standard non-clogging snub nose end, flush diaphragm or protected flush diaphragm with

More information

HERZ-Thermal Actuators

HERZ-Thermal Actuators HERZ-Thermal Actuators Data Sheet 7708-7990, Issue 1011 Dimensions in mm 1 7710 00 1 7710 01 1 7711 18 1 7710 80 1 7710 81 1 7711 80 1 7711 81 1 7990 00 1 7980 00 1 7708 11 1 7708 10 1 7708 23 1 7709 01

More information

OPERATING PRINCIPLES FOR PHOTOELECTRIC SENSORS

OPERATING PRINCIPLES FOR PHOTOELECTRIC SENSORS OPERATING PRINCIPLES FOR PHOTOELECTRIC SENSORS Photoelectric These sensors use light sensitive elements to detect objects and are made up of an emitter (light source) and a receiver. Four types of photoelectric

More information

Technical data. General specifications. Indicators/operating means. Electrical specifications Operating voltage U B Power consumption P 0 Interface

Technical data. General specifications. Indicators/operating means. Electrical specifications Operating voltage U B Power consumption P 0 Interface Release date: 06-0- 09: Date of issue: 06-0- 009_eng.xml Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service

More information

Kit 106. 50 Watt Audio Amplifier

Kit 106. 50 Watt Audio Amplifier Kit 106 50 Watt Audio Amplifier T his kit is based on an amazing IC amplifier module from ST Electronics, the TDA7294 It is intended for use as a high quality audio class AB amplifier in hi-fi applications

More information

38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A

38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 SERIES Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical

More information

ADM1TE 5/30A DIN rail single phase two wire energy meter

ADM1TE 5/30A DIN rail single phase two wire energy meter ADMTE 5/30A DIN rail single phase two wire energy meter. Safety instruction.2 Foreword.3 Performance criteria.4 Specifications.5 Basic errors.6 Description.7 Dimensions.8 Installation.9 Operating.0 Troubleshooting.

More information

W 260: Standard photoelectric switch series for a broad range of applications

W 260: Standard photoelectric switch series for a broad range of applications W 0 Photoelectric switches Photoelectric proximity switches, BGS Photoelectric proximity switches, energetic Photoelectric reflex switches W 0: Standard photoelectric switch series for a broad range of

More information

Beta-TX Laser Diode Module. T he Beta-TX is a complete self contained laser diode system

Beta-TX Laser Diode Module. T he Beta-TX is a complete self contained laser diode system Laser Diode Module A HIGH SPEED MODULATABLE LASER WITH SPEEDS UP TO 50 MHZ Features Modulation speeds up to 50 MHz Visible and Infra red versions Powers from 1mW to 100 mw Flexible design accommodating

More information

mpm DIN 43650 CONNECTORS

mpm DIN 43650 CONNECTORS mpm DIN 43650 CONNECTORS : Highest quality, robust connectors for hydraulic and pneumatic electromechanical devices Broad offering of DIN 43650 connectors and devices Combined Brad and mpm cordsets : Provide

More information

NGC-30-CR -CRM -CRMS -CTM -CVM

NGC-30-CR -CRM -CRMS -CTM -CVM NG-0-R -RM -RMS -TM -VM ontrol and monitoring modules for use with the Raychem NG-0 Installation Instructions Description The NG-0-RM/-RMS and NG-0-TM provide ground-fault and line current sensing, alarming,

More information

DMX-K-DRV. Integrated Step Motor Driver + (Basic Controller) Manual

DMX-K-DRV. Integrated Step Motor Driver + (Basic Controller) Manual DMX-K-DRV Integrated Step Motor Driver + (Basic Controller) Manual DMX-K-DRV Manual page 1 rev 1.33 COPYRIGHT 2007 ARCUS, ALL RIGHTS RESERVED First edition, June 2007 ARCUS TECHNOLOGY copyrights this document.

More information

INTMOD485-LH Protocol Converter

INTMOD485-LH Protocol Converter For Use with L-GAGE LH Series Sensors Features Converts an LH Network to the 485-RTU protocol Supports baud rates up to 230,400 baud Supports LH Networks with up to 32 sensors Model Protocol Conversion

More information

ABB Drives. User s Manual. Pulse Encoder Interface Module RTAC-01

ABB Drives. User s Manual. Pulse Encoder Interface Module RTAC-01 ABB Drives User s Manual Pulse Encoder Interface Module RTAC-0 Pulse Encoder Interface Module RTAC-0 User s Manual 3AFE 64486853 REV A EN EFFECTIVE:.5.00 00 ABB Oy. All Rights Reserved. Safety instructions

More information

Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points

Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points Features SELV Compliant No Detection Passive Injector Gigabit Compatible Full Protection

More information

33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application

33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application 33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application Features Compliant with the IEEE802.3at Standard -40 to +60 C Temperature Range Diagnostic LEDs Full Protection

More information

Contents. Document information

Contents. Document information User Manual Contents Document information... 2 Introduction... 3 Warnings... 3 Manufacturer... 3 Description... Installation... Configuration... Troubleshooting...11 Technical data...12 Device Scope: PCB

More information

Ventostat Wall Mount. Telaire Wall Mount CO 2. , Humidity and Temperature Transmitters. GE Measurement & Control. Features:

Ventostat Wall Mount. Telaire Wall Mount CO 2. , Humidity and Temperature Transmitters. GE Measurement & Control. Features: GE Measurement & Control Ventostat Wall Mount Telaire Wall Mount, Humidity and Temperature Transmitters Features: Patented, Absorption Infrared Gas sensing engine provides high accuracy in a compact low

More information

SB 175 Connectors - up to 280 Amps

SB 175 Connectors - up to 280 Amps Connectors - up to 280 Amps 2 Pole Wires sizes from #12 (3.3 mm²) to 1/0 (50 mm²) fit in the second to largest connector in the SB series. The 3 pole adds an additional position for power or grounding.

More information

Electronic Pressure Switch EDS 3000

Electronic Pressure Switch EDS 3000 For Your Information Electronic Pressure Switch EDS 3000 User Manual Revision: November 01, 2002 1. EDS 3000 Functions The EDS 3000 unit offers the following functions: Display pressure in psi, MPa, or

More information

PLUGS & RECEPTACLES. INNOVATIVE EXPLOSION PROTECTION by R. STAHL 1-800-782-4357

PLUGS & RECEPTACLES. INNOVATIVE EXPLOSION PROTECTION by R. STAHL 1-800-782-4357 Series Features: Color coding and pin configuration makes it physically impossible to mate plugs and receptacles of different voltages and current ratings (per IEC 60 309-2). Interlocked switch mechanism

More information

ETC TWO STAGE ELECTRONIC TEMPERATURE CONTROL

ETC TWO STAGE ELECTRONIC TEMPERATURE CONTROL RANCO INSTALLATION INSTRUCTIONS ETC TWO STAGE ELECTRONIC TEMPERATURE CONTROL Relay Electrical Ratings PRODUCT DESCRIPTION The Ranco ETC is a microprocessor-based family of electronic temperature controls,

More information

MAIN MENU PRODUCTS APPLICATIONS INDEX SELECTION GUIDE

MAIN MENU PRODUCTS APPLICATIONS INDEX SELECTION GUIDE Digital Display Laser Thrubeam Sensors LX-V Series Features Ultra high repeatability from µm Mil Parallel laser beam High sampling speed of 8 µs Built-in comparator and analog output Built-in digital display

More information

R55F Series Fiber-Optic Color Mark Sensors

R55F Series Fiber-Optic Color Mark Sensors For Plastic and Glass Fiber Optics R55F Series Sensor Features Outstanding color contrast sensitivity; detects 16 levels of gray scale. Depending on beam color, reliably detects the toughest color mark

More information

PD30ETB20xxIS. Photoelectrics, Background Suppression reflective with IR light. Main features. Description

PD30ETB20xxIS. Photoelectrics, Background Suppression reflective with IR light. Main features. Description Photoelectrics, Background Suppression reflective with IR light Main features Description The PD30ET... stainless steel sensors are built with high-quality materials and designed for harsh environments.

More information

Model 201 Wiegand Touchpad Reader Installation Guide

Model 201 Wiegand Touchpad Reader Installation Guide Model 201 Wiegand Touchpad Reader Installation Guide P/N 460353001C 15AUG11 2011 UTC Fire & Security. All rights reserved. This document may not be copied in whole or in part or otherwise reproduced without

More information

MODEL 5010 DUAL CHANNEL SMOKE/FIRE DETECTION MODULE

MODEL 5010 DUAL CHANNEL SMOKE/FIRE DETECTION MODULE DESCRIPTION MODEL 5010 DUAL CHANNEL SMOKE/FIRE DETECTION MODULE DESCRIPTION The SST Model 5010 Two Channel Smoke/Fire Detection Module provides two independent detection input channels for the NOVA-5000

More information

technical data (according to IEC 60947-5-2)

technical data (according to IEC 60947-5-2) Photoelectric sensors: Series 3#30 & 3#31 ü Complete miniature sensor series mm in rugged Crastin housings ü Shock & vibration resistant due to fully vacuum-potted electronics ü Diffuse sensors with precise

More information

W150: Miniature photoelectric switch series with completely integrated electronics

W150: Miniature photoelectric switch series with completely integrated electronics Product group W50 Photoelectric proximity switch BGS Photoelectric proximity switch energ. Photoelectric reflex switch W50: iniature photoelectric switch series with completely integrated electronics Through-beam

More information

photoelectric highlights www.automation.datalogic.com

photoelectric highlights www.automation.datalogic.com photoelectric miniature sensors S8 series The new S8 series of compact sensors offers excellent detection performances, usually associated with sensors that have larger dimensions and a higher price. The

More information

Absolute Rotary Encoder E6CP

Absolute Rotary Encoder E6CP Absolute Rotary Encoder Absolute Rotary Encoders with Gray Code Output Gray code output decreases output errors Lightweight plastic housing Used with Omron s H8PS Cam Positioner, this encoder detects the

More information

Type Supply voltage Output Connection Sensing range Standard target Timer function Part number Polarized 10-30 VDC NPN/PNP Pre-leaded 500 mm to 10 m

Type Supply voltage Output Connection Sensing range Standard target Timer function Part number Polarized 10-30 VDC NPN/PNP Pre-leaded 500 mm to 10 m R Long-distance Photoelectric Sensor Advanced Design with Automatic Teach Function H Retroreflective models have a sensing distance of 10 m H Teach function up to 2 m diffuse H Zone mode for precise sensing

More information

Advantium 2 Plus Alarm

Advantium 2 Plus Alarm ADI 9510-B Advantium 2 Plus Alarm INSTALLATION AND OPERATING INSTRUCTIONS Carefully Read These Instructions Before Operating Carefully Read These Controls Corporation of America 1501 Harpers Road Virginia

More information

Automation System TROVIS 6400 TROVIS 6493 Compact Controller

Automation System TROVIS 6400 TROVIS 6493 Compact Controller Automation System TROVIS 6400 TROVIS 6493 Compact Controller For panel mounting (front frame 48 x 96 mm/1.89 x 3.78 inch) Application Digital controller to automate industrial and process plants for general

More information

Technical Data. General specifications Switching element function Rated operating distance s n 5 mm

Technical Data. General specifications Switching element function Rated operating distance s n 5 mm 0102 Model Number Features 5 mm flush Usable up to SIL 2 acc. to IEC 61508 Accessories EXG-18 Quick mounting bracket with dead stop BF 18 Mounting flange, 18 mm Technical Data specifications Switching

More information

SECTION 26 29 23 VARIABLE FREQUENCY DRIVES

SECTION 26 29 23 VARIABLE FREQUENCY DRIVES SECTION 26 29 23 VARIABLE FREQUENCY DRIVES PART 1 GENERAL 1.01 SCOPE A. Furnish and install individual freestanding variable frequency AC drives (VFD) as shown on the Drawings and specified herein. 1.02

More information

Ordering Information. Cylindrical Proximity Sensor E2E/E2E2

Ordering Information. Cylindrical Proximity Sensor E2E/E2E2 Cylindrical Sensor E2E/E2E2 A New Series of Easy-to-use and Tough E2E/E2E2 Models Long-size E2E2 Sensor Conforms to CENELEC Ideal for a variety of applications. With a metal connector that can be tightened

More information

4 non-safe digital I/O channels 2 IO-Link Master V1.1 slots. Figure 1. Figure 2. Type code. TBPN-L1-FDIO1-2IOL Ident no. 6814053.

4 non-safe digital I/O channels 2 IO-Link Master V1.1 slots. Figure 1. Figure 2. Type code. TBPN-L1-FDIO1-2IOL Ident no. 6814053. PROFINET slave Integrated Ethernet switch 100 Mbps supported 2 x M12, 4-pin, D-coded, Ethernet fieldbus connection Glass-fiber reinforced housing Shock and vibration tested Potted module electronics Protection

More information

93.68/93.69. Time scale: from 0.1s to 6h Multi-function For use with 34.51 (EMR) and 34.81 (SSR) relays. Screw terminal and push-in terminal

93.68/93.69. Time scale: from 0.1s to 6h Multi-function For use with 34.51 (EMR) and 34.81 (SSR) relays. Screw terminal and push-in terminal Series - Timed socket for 34 series Features.68/.69 Slim timed sockets for 34 series, 6.2 mm wide Timer adjustment via top mounted rotary knob accessible after assembly Control signal terminal DIP-switch

More information

Digital display DA 48

Digital display DA 48 Loop powered plug-in LCD display No auxiliary energy source needed Scale freely adjustable on site Can be turned to any position Suitable for any 0 ma transmitter with EN 175301-803A connector Digital

More information

Three Channel Optical Incremental Encoder Modules Technical Data

Three Channel Optical Incremental Encoder Modules Technical Data Three Channel Optical Incremental Encoder Modules Technical Data HEDS-9040 HEDS-9140 Features Two Channel Quadrature Output with Index Pulse Resolution Up to 2000 CPR Counts Per Revolution Low Cost Easy

More information

Operating instructions Diffuse reflection sensor. OJ50xx 701396 / 01 07 / 2004

Operating instructions Diffuse reflection sensor. OJ50xx 701396 / 01 07 / 2004 Operating instructions Diffuse reflection sensor OJ50xx 7096 / 0 07 / 004 Contents Preliminary note. Symbols used Function and features Installation. Installation of the supplied mounting fixture 4 4 Electrical

More information

W 27-2: The photoelectric switch series with expanded possibilities

W 27-2: The photoelectric switch series with expanded possibilities W - Photoelectric switches Photoelectric proximity switches, BGS Photoelectric reflex switches Through-beam photoelectric switches W -: The photoelectric switch series with expanded possibilities metres

More information

Position switches FR series

Position switches FR series Position switches FR series Selection diagram 01 A1 08 02 A2 A4 05 A5 external rubber gasket external rubber gasket external rubber gasket external rubber gasket external rubber gasket 21 25 4 69 5 stainless

More information

SYSTEM 45. C R H Electronics Design

SYSTEM 45. C R H Electronics Design SYSTEM 45 C R H Electronics Design SYSTEM 45 All in one modular 4 axis CNC drive board By C R Harding Specifications Main PCB & Input PCB Available with up to 4 Axis X, Y, Z, & A outputs. Independent 25

More information

Small U-shaped Micro Photoelectric Sensor. Enables space saving and quick installation!

Small U-shaped Micro Photoelectric Sensor. Enables space saving and quick installation! 4 Small Micro Photoelectric Amplifier Built-in PM-44 SERIES PM-4 SERIES General terms and conditions... F- selection guide... P.44~ Related Information Glossary of terms / General precautions... P.39~

More information

Whale 3. User Manual and Installation Guide. DC Servo drive. Contents. 1. Safety, policy and warranty. 1.1. Safety notes. 1.2. Policy. 1.3. Warranty.

Whale 3. User Manual and Installation Guide. DC Servo drive. Contents. 1. Safety, policy and warranty. 1.1. Safety notes. 1.2. Policy. 1.3. Warranty. Whale 3 DC Servo drive User Manual and Installation Guide Contents 1. Safety, policy and warranty. 1.1. Safety notes. 1.2. Policy. 1.3. Warranty. 2. Electric specifications. 2.1.Operation ranges. 3. Connections

More information