COBALT DRILL BITS 12 X RATING COBALT DRILL BITS Visit our website at COBALT DRILL SETS HIGH SPEED DRILL BITS
|
|
|
- Loraine Richard
- 7 years ago
- Views:
Transcription
1 COBALT DRILL BITS COBALT DRILL BITS Cobalt drills are designed to cut through extremely hard metals, including stainless steel. No center punch needed: Century 135 Quick Cut Points are self-centering and penetrate faster with less pressure...will not "walk" or "wander" at the starting surface. Extremely heat resistant, must be used and operated in power units that have a RPM speed of 1,500 or more for maximum efficiency. Aerospace NAS 907-J specifications. 12 X LIFE * RATING U.S.A. U.S.A. IMPORT IMPORT U.S.A. U.S.A. DECIMAL OVERALL CARDED CARDED CARDED CARDED BULK BULK SIZE EQUIVALENT LENGTH PART NO. PAK PART NO. PACK PART NO. PACK 1/16" /8" 26204* * /64" " 26205* * /32" /4" 26206* * /64" /8" 26207* * /8" /4" 26208* * /64" /8" /32" /8" /64" /4" /16" /2" /64" /8" /32" /4" /64" /8" /4" " /64" /8" /32" /4" /64" /8" /16" /2" /64" /8" /32" /4" /64" /8" /8" " /64" /8" /32" /4" /64" /8" /16" /2" /64" /8" /32" /4" /64" /8" /2" " * packaged two per card HIGH SPEED DRILL BITS COBALT DRILL SETS #26713 & #26513 # /16" to 1/4" by 64ths drills /16" to 1/4" by 64ths import drills /16" to 1/4" by 64ths drills METAL INDEX SETS /16" to 1/2" by 32nds drills /16" to 1/2" by 32nds import drills /16" to 1/2" by 32nds drills /16" to 1/2" by 32nds import drills /16" to 1/2" by 64ths drills /16" to 1/2" by 64ths import drills #26115 & #26315 #26121 & #26321 #26129 & #26329 * This products life rating is a comparison to the average 118 point high speed steel drill
2 CHARGER DRILL BITS CHARGER DRILL BITS Chargers Advanced Helix Geometry starts at the 135 Quick Cut Point, modified to be self-feeding and require less force from the user. The unique flute design allows for fast chip removal, ensuring the cutting point remains cool, reducing wear for a longer cutting life. Industrial heavy duty web provides added stability and strength for exact holes while drilling in the hardest materials. Charger drill bits use less power, drill more holes with cordless (per charge) or electric drills. 10 X MORE HOLES LIFE * RATING PER CHARGE U.S.A. DECIMAL OVERALL CARDED SIZE EQUIVALENT LENGTH PART NO. PACK 1/16" /8" 25404* 6 5/64" " 25405* 6 3/32" /4" 25406* 6 7/64" /8" 25407* 6 1/8" /4" 25408* 6 9/64" /8" /32" /8" /64" /4" /16" /2" /64" /8" /32" /4" /64" /8" /4" " /64" /8" /32" /4" /64" /8" /16" /2" /64" /8" /32" /4" /64" /8" /8" " /8" REDUCED SHANK 25/64" /8" /32" /4" /64" /8" /16" /2" /64" /8" /32" /4" /64" /8" /2" " * packaged two per card CHARGER DRILL SETS /16" to 1/4" by 64ths drills METAL INDEX SETS # /8" RS 1/16" to 1/2" by 32nds /16" to 3/8" by 64ths /8" RS 1/16" to 1/2" by 64ths #25242 #25230 #25276 * This products life rating is a comparison to the average 118 point high speed steel drill. 2 Solving problems since 1940, yours is next... The Power of the Blue Wall
3 TITANIUM DRILL BITS TITANIUM DRILL BITS Titanium nitrate coating resists heat and adds lubricity to extend drill life. Designed for precision drilling in metal, wood and plastic. No center punch needed: Century Quick-Cut Points are self-centering and penetrate faster with less pressure...will not "walk" or "wander" at the starting surface. 8 X LIFE * RATING DECIMAL OVERALL CARDED SIZE EQUIVALENT LENGTH PART NO. PACK 1/16" /8" 88404* 6 5/64" " 88405* 6 3/32" /4" 88406* 6 7/64" /8" 88407* 6 1/8" /4" 88408* 6 9/64" /8" /32" /8" /64" /4" /16" /2" /64" /8" /32" /4" /64" /8" /4" " /64" /8" /32" /4" /64" /8" /16" /2" /64" /8" /32" /4" /64" /8" /8" " /8" REDUCED SHANK 25/64" /8" /32" /4" /64" /8" /16" /2" /64" /8" /32" /4" /64" /8" /2" " * packaged two per card TITANIUM DRILL SETS HIGH SPEED DRILL BITS /16" to 1/4" by 64ths import #88439 * This products life rating is a comparison to the average 118 point high speed steel drill
4 BLACK OXIDE DRILL BITS BLACK OXIDE DRILL BITS Manufactured from industrial high speed steel, surface treated for high performance and long life. Designed to drill common steel (flat bar, angle iron, tubing), wood and plastic. No center punch needed: Century Quick-Cut Points are self-centering and penetrate faster with less pressure...will not "walk" or "wander" at the starting surface. Manufactured to Aerospace NAS 907-B specifications. 6 X LIFE * RATING #24713 & #24313 U.S.A IMPORT U.S.A. IMPORT IMPORT DECIMAL OVERALL CARDED CARDED CARDED BULK BULK BULK SIZE EQUIVALENT LENGTH PART NO. PART NO. PACK PART NO. PART NO. PACK 1/16" /8" 24204* 24404* /64" " 24205* 24405* /32" /4" 24206* 24406* /64" /8" 24207* 24407* /8" /4" 24208* 24408* /64" /8" /32" /8" /64" /4" /16" /2" /64" /8" /32" /4" /64" /8" /4" " /64" /8" /32" /4" /64" /8" /16" /2" /64" /8" /32" /4" /64" /8" /8" " /64" " /32" /8" /64" /8" /16" /2" /64" /8" /32" /4" /64" /8" /2" " /8" REDUCED SHANK 25/64" " /32" /8" /64" /8" /16" /2" /64" /8" /32" /4" /64" /8" /2" " * packaged two per card BLACK OXIDE DRILL SETS /16" to 1/4" by 64ths drills /16" to 1/4" by 64ths import drills #24015 & #24035 #24021 & #24921 #24029, #24929 & #24038 METAL INDEX SETS /16" to 1/2" by 32nds drills /8" RS 1/16" to 1/2" by 32nds drills /16" to 1/2" by 32nds drills /16" to 1/2" by 32nds import drills /16" to 1/2" by 64ths drills /16" to 1/2" by 64ths import drills /8" RS 1/16" to 1/2" drills * This products life rating is a comparison to the average 118 point high speed steel drill. 4 Solving problems since 1940, yours is next... The Power of the Blue Wall
5 BRITE DRILL BITS BRITE DRILL BITS Brite industrial drill bits feature premium grade high speed steel for general purpose drilling in wood, metal and plastic. No center punch needed: Century Quick-Cut Points are self-centering and penetrate faster with less pressure...will not "walk" or "wander" at the starting surface. Ground flats on the shank providing tight chucking, even with keyless chucks. 4 X LIFE * RATING DECIMAL OVERALL CARDED CARDED BULK BULK SIZE EQUIVALENT LENGTH PART NO. PACK PART NO. PACK 1/64" /4" /32" /8" /64" /4" /16" /8" 22304* /64" " 22305* /32" /4" 22306* /64" /8" 22307* /8" /4" 22308* /64" /8" /32" /8" /64" /4" /16" /2" /64" /8" /32" /4" /64" /8" /4" " /64" /8" /32" /4" /64" /8" /16" /2" /64" /8" /32" /4" /64" /8" /8" " /64" /8" /32" /4" /64" /8" /16" /2" /64" /8" /32" /4" /64" /8" /2" " /8" REDUCED SHANK 25/64" /8" /32" /4" /64" /8" /16" /2" /64" /8" /32" /4" /64" /8" /2" " /4" REDUCED SHANK 5/16" /2" /8" " /16" /2" /2" " HIGH SPEED DRILL BITS * packaged two per card #22713 BRITE DRILL SETS /16" to 1/4" by 64ths drills METAL INDEX SETS /16" to 1/2" by 32nds drills /8" RS 1/16" to 1/2" by 32nds drills /16" to 1/2" by 32nds drills /16" to 1/2" by 64ths drills /8" RS 1/16" to 1/2" by 64ths drills #22915 & #23915 #22921 #22929 & #23929 * This products life rating is a comparison to the average 118 point high speed steel drill
6 HSS DRILL BITS HSS DRILL BITS High speed drills feature premium high speed steel and a duotone finish for fast chip removal in wood, metal and plastic. No center punch needed: Century Quick-Cut Points are self-centering and penetrate faster with less pressure...will not "walk" or "wander" at the starting surface. Reduced 3/8" shank fits all 3/8" or larger chucks. 2 X LIFE * RATING DECIMAL OVERALL CARDED CARDED BULK BULK SIZE EQUIVALENT LENGTH PART NO. PACK PART NO. PACK 1/16" /8" 88204* /64" " 88205* /32" /4" 88206* /64" /8" 88207* /8" /4" 88208* /64" /8" /32" /8" /64" /4" /16" /2" /64" /8" /32" /4" /64" /8" /4" " /64" /8" /32" /4" /64" /8" /16" /2" /64" /8" /32" /4" /64" /8" /8" " /8" REDUCED SHANK 25/64" /8" /32" /4" /64" /8" /16" /2" /64" /8" /32" /4" /64" /8" /2" " * packaged two per card HSS DRILL SETS #88913 # /16" to 1/4" by 64ths drills /16" to 1/4" by 64ths drills /16" to 3/8" by 64ths drills /16" to 1/4" by 64ths drills, #1, #2, #3 Phillips, #2, #3 Square, #6-8, #8-10 Slotted power screwdriving bits and 1/4", 5/16", 3/8", 7/16" nutsetters /16" to 1/2" by 64ths drills #88721 #88725 #88729 * This products life rating is a comparison to the average 118 point high speed steel drill. 6 Solving problems since 1940, yours is next... The Power of the Blue Wall
7 WIRE GAUGE DRILL BITS WIRE GAUGE DRILL BITS Made from feature premium grade high speed steel. Precision ground points. Designed to operate in stationary or portable tools. General purpose drilling in wood, metal and plastic. HIGH SPEED DRILL BITS DECIMAL OVERALL CARDED BULK SIZE EQUIVALENT LENGTH PART NO. PART NO. PACK /8" /8" /4" /4" /4" /4" /8" /8" /8" /8" /2" /2" /2" /8" /8" /8" /8" /4" /4" /4" /4" /8" /8" /8" " " " /8" /8" /4" DECIMAL OVERALL CARDED BULK SIZE EQUIVALENT LENGTH PART NO. PART NO. PACK /4" /4" /8" /8" /8" /2" /2" /2" /8" /8" /8" /4" /4" /8" /8" /8" " " " " " /8" /8" /8" /8" /4" /4" /8" /8" /8" METAL INDEX SET #1 to #60 drills #
8 LETTER GAUGE & BRITE QUICK CHANGE DRILLS LETTER GAUGE DRILL BITS Made from feature premium grade high speed steel. Precision ground 118 points. Designed to operate in stationary or portable tools. General purpose drilling in wood, metal and plastic. DECIMAL OVERALL CARDED BULK SIZE EQUIVALENT LENGTH PART NO. PART NO. PACK A /8" B " C " D /8" E " F /8" G /8" H /8" I /8" J /8" K /4" L /4" M /8" N /8" O /2" P /8" Q /4" R /4" S /8" T /8" U " V " W /8" X /8" Y /4" Z /4" #11526 METAL INDEX SET Letter A-Z drills BRITE QUICK CHANGE DRILL BITS POWER Brite drill bits feature premium grade high speed steel for general purpose drilling in wood, metal and plastic. No center punch needed: Century Quick-Cut Points are self-centering and penetrate faster with less pressure...will not "walk" or "wander" at the starting surface. 1/4 Hex Shank fits all quick-change adapters. DECIMAL DRIVE CARDED SIZE EQUIVALENT SHANK PART NO. PACK 1/16" /4" hex /32" /4" hex /8" /4" hex /32" /4" hex /16" /4" hex /32" /4" hex /4" /4" hex BRITE DRILL SET PIECES INCLUDES PART NO. PACK 7 1/16", 3/32", 1/8", 5/32", /16", 7/32", and 1/4". #22907 * Letter gauge drills may require a 5 day turnaround time. 8 Solving problems since 1940, yours is next... The Power of the Blue Wall
9 IMPACT PRO DRILL BITS IMPACT PRO BLACK OXIDE DRILL BITS Made from premium M2 steel to withstand heat and wear under rigorous drilling applications. Single piece, fully ground construction lasts 6x longer than two piece constructed drill bits. 1/4" quick change shank fits all quick change adapters and cordless impact tools. DECIMAL OVERALL CARDED SIZE EQUIVALENT LENGTH PART NO. PACK 1/16 " /8" /32 " /8" /8 " /8" /64 " /4" /32 " /4" /64 " /8" /16 " /8" /64 " /8" /32 " /8" /64 " /8" /4 " /8" /32 " /8" /16 " /8" /32 " /8" /8 " /8" /16 " /8" /2 " /8" HIGH SPEED DRILL BITS IMPACT DRILL BIT SETS PIECES INCLUDES PART NO. PACK 5 Includes 1/8" (2), 5/32", 3/16", 1/4" drills #24655 #24657 # Includes 1/8" (2), 5/32", 3/16", /32", 1/4", 5/16" drills. 10 Includes 1/8" (2), 9/64", 5/32", 11/64", /16", 7/32", 1/4", 5/16", 3/8" drills. 24 Includes (1) magnetic bit holder, (1)#1, (2)# and (1)#3 Phillips, (1)T-10 and (2)T-25 Star-Drive, (1)#6-8, (1)#8-10, (1)#10-12 Slotted, (1)#1, (2)#2, (1)#3 Square insert bits, and power bits in (1)#2 Phillips, (1)#2 Square, (1)1/4", (1) 5/16" nutsetters and (2) 1/8", (1) 5/32", (1) 3/16" and (1) 1/4" high speed steel drill bits. #
10 LONG BOY, AIRCRAFT & S&D DRILL BITS LONG BOY DRILL BITS Long boys are Brite finished, 118 point, high speed steel drills. Spiral Flute area is 9" long for general purpose extra deep drilling in wood, metal and plastics. DECIMAL FLUTE OVERALL TUBED SIZE EQUIVALENT LENGTH LENGTH PART NO. PACK 1/8" " 12" /16" " 12" /4" " 12" /32" " 12" /16" " 12" /8" " 12" /16" " 12" /2" " 12" AIRCRAFT DRILL BITS Aircraft extension drills are surface treated, high speed steel with 135 Quick-Cut points that will not "walk" or "wander." Designed for drilling through materials less than 4" thick. Extension drills are used in areas where extra reach is important. DECIMAL FLUTE OVERALL CARDED TUBED SIZE EQUIVALENT LENGTH LENGTH PART NO. PART NO. PACK 1/16" /8" 6" /32" /4" 6" /8" /8" 6" /32" " 6" /16" /16" 6" /32" /2" 6" /4" /4" 6" /16" /16" 6" /8" /8" 6" " OVERALL LENGTH 1/8" /8" 12" /16" /16" 12" /32" /2" 12" /4" /4" 12" /32" /16" 12" /16" /16" 12" /8" /8" 12" /16" /16" 12" /2" /2" 12" INDUSTRIAL S&D DRILL BITS Silver & Deming style drill bits, 118 point. Duo-tone black oxide and polished finish for fast chip removal, keeping the bit cool and reducing wear. High speed steel will remain sharper while drilling large diameter holes in ferrous and non-ferrous steels and other materials where large diameter holes are required. Reduced 1/2" shank fits all 1/2" or larger chucks. DECIMAL TUBED SIZE EQUIVALENT PART NO. PACK 9/16" /8" /16" /4" /16" /8" /16" " INDUSTRIAL S&D DRILL SET #44408 PIECES INCLUDES PART NO. PACK 8 9/16", 5/8", 11/16",3/4", 13/16", 7/8", /16" and 1" in a metal pop-up index. 10 Solving problems since 1940, yours is next... The Power of the Blue Wall
11 ECONOMY S & D DRILL BITS ECONOMY S&D DRILL BITS Silver & Deming style drill bits, 118 point. Surface treated to ward off heat and friction commonly found in heavy duty drilling jobs. DECIMAL SIZE EQUIVALENT SHANK PART NO. PACK 33/64" /2" /32" /2" /64" /2" /16" /2" /64" /2" /32" /2" /64" /2" /8" /2" /64" /2" /32" /2" /64" /2" /16" /2" /64" /2" /32" /2" /64" /2" /4" /2" /64" /2" /32" /2" /64" /2" /16" /2" /64" /2" /32" /2" /64" /2" /64" /2" /8" /2" /64" /2" /32" /2" /64" /2" /16" /2" /64" /2" /32" /2" /64" /2" " /2" /32" /2" /16" /2" /32" /2" /8" /2" /32" /2" /16" /2" /32" /2" /4" /2" /32" /2" /16" /2" /32" /2" /8" /2" /32" /2" /16" /2" /32" /2" /2" /2" /4" SHANK 1" /4" /8" /4" /4" /4" /8" /4" /2" /4" HIGH SPEED DRILL BITS ECONOMY S&D DRILL SET #47408 PIECES INCLUDES PART NO. PACK 8 9/16", 5/8", 11/16", 3/4", 13/16", /8", 15/16" and 1" in a metal pop-up index. Individually boxed
12 SPECIALTY DRILL BITS HIGH SPEED STEEL STEP DRILL BITS Century step drills are for cutting in ferrous and non-ferrous metals, plastics and wood up to 1/8" thick. Double flute design reduces chatter and deburrs holes. Zirconium coating reduces wear for a longer tool life. STEP SHANK CARDED SIZE STEPS DEPTH SIZE PART NO. PACK 1/8" - 1/2" 13 1/8" 1/4" /16" - 1" 8 1/8" 3/8" /4" - 3/4" 9 1/8" 3/8" /16" - 7/8" 12 1/8" 3/8" DOUBLE ENDED BODY DRILL BITS Manufactured from quality, industrial high speed steel. 135 Quick-Cut points that will not "walk" or "wander." Special heat treatment, results in cutting edges that remain sharp longer when drilling tough materials. DECIMAL OVERALL CARDED BULK SIZE EQUIVALENT LENGTH PART NO. PART NO. PACK 1/8" " 17408* /64" " /32" /8" /16" /4" /4" /4" # " * packaged two per card, standard pack of 6 STUBBY DRILL BITS Stubby drills are manufactured from quality, industrial high speed steel. Special heat treatment, results in cutting edges that remain sharp longer when drilling tough materials. DECIMAL OVERALL CARDED BULK SIZE EQUIVALENT LENGTH PART NO. PART NO. PACK 1/8" /8" 17008* /16" /4" /4" /2" WIRE GAUGE # /4" * packaged two per card, standard pack of COMBINED DRILLS & COUNTERSINKS Countersink drills are manufactured from quality, industrial high speed steel. Drill pilot holes and recess in wood, metal and plastic. DECIMAL BODY SINK CARDED BULK SIZE EQUIVALENT SIZE SIZE PART NO. PART NO. PACK 1/8" /16" # Solving problems since 1940, yours is next... The Power of the Blue Wall
13 SPOT WELD DRILLS & CUTTER SPOT WELD DRILL BITS Modified center spur designed to cut welds on the top panel, leaving the back panel slightly penetrated. Made from premium Cobalt Steel for a longer, useful tool life. DECIMAL CARDED BULK SIZE EQUIVALENT PART NO. PART NO. PACK 6.5 MM MM MM HIGH SPEED DRILL BITS DOUBLE ENDED SPOT WELD DRILL BITS Modified center spur designed to cut welds on the top panel, leaving the back panel slightly penetrated. Made from premium Cobalt Steel for a longer, useful tool life. DECIMAL CARDED BULK SIZE EQUIVALENT PART NO. PART NO. PACK 6.5 MM MM MM SPOT WELD CUTTER Quickly remove spot welds in one easy cut. Double sided cutter included Always center punch weld area to prevent skipping. CARDED BULK SIZE INCLUDES PART NO. PART NO. PACK 3/8" Arbor and 3/8" double ended cutter /8" 2 pack of replacement blades
14 DRILLING ACCESSORIES CHUCK KEYS Hardened tempered alloy steel keys in a variety of sizes for all standard drill chucks. Model K30 and KG are most popular for 3/8" portable electric drill motors. Model #9 is a special Black & Decker* style. THUMB HANDLE BENT HANDLE T-HANDLE CHUCK PILOT MODEL# CARDED SIZE SIZE HANDLE JACOB# PART NO. PACK 1/4" 5/32" T-Handle K /4" - 3/8" 13/64" T-Handle # /4" - 3/8" 15/64" Thumb K /4" - 3/8" 1/4" Bent KGA /4" - 3/8" 1/4" T-Handle KG /8" - 1/2" 9/32" Thumb KK /2" 1/4" Thumb K /2" 11/32" Thumb KR Chuck Key Holder DRILL SAW FRACTIONAL DRILL GAUGE SIZE APPLICATION PART NO. PACK 1/4 1/4" drill with 90 cutting edges along the sides for creating custom shapes or enlarging holes in plastics, wood or metal. APPLICATION PART NO. PACK Accurately sizes 1/16" to 1/2" by 64ths drill bits. Bagged for pegboard or bin. ADJUSTABLE DRILL STOP CARDED BAGGED PIECES INCLUDES PART NO. PACK PART NO. PACK 2 Fits 1/16" to 1/2" diameter drill bits Quickly adjusts to control exact depth of holes. Drill holes faster and more accurately. #73512 CUTTING OIL INCLUDES PART NO. PACK For use in conjunction with taps, dies and drills for smooth precise cuts and extended tool life. EMPTY METAL INDEXES INCLUDES PART NO. PACK Holds 21 fractional drills Holds 29 fractional drills #28403 # Solving problems since 1940, yours is next... The Power of the Blue Wall
Wood Drilling.
Wood Drilling www.irwin.com A Century of Quality and Innovation In 1885, the IRWIN Auger Bit Company was formed. Over 125 years later, IRWIN is still the leading manufacturer of wood drilling bits and
Think precision, Think HSS REAMING
Think precision, Think HSS REAMING SUMMARY REAMING TOOLS 2 Zoom on a reamer 3 Which HSS for maximum efficiency? 4 Coatings for the best performance 5 Vocabulary 6 Choose the right design 7 Types of bevel
CNC Applications Speed and Feed Calculations
CNC Applications Speed and Feed Calculations Photo courtesy ISCAR Metals. Turning Center Cutters What types of cutters are used on CNC turning Centers? Carbide (and other hard materials) insert turning
UNITED STATES CUTTING TOOL INSTITUTE Product Groupings for Standards Activities CUTTING TOOL PRODUCTS
CUTTING TOOL PRODUCTS 1. BORING ISO 5609 Boring bars for indexable inserts Dimensions ISO 6261 Boring bars (tool holders with cylindrical shank) for indexable inserts Designation JIS B 4128 Boring bars
SCREWDRIVER SAFETY TIPS
SCREWDRIVER SAFETY TIPS Never use a screwdriver as a cold chisel, or for prying, punching, chiseling, scoring or scraping. Make sure the tip fits the slot of the screw; not too loose or tight. Never expose
TechCut 4 Precision Low Speed Saw
Product Brochure TechCut 4 Precision Low Speed Saw 3" - 6" Blade Range Digital Speed Display 1-Micron Sample Indexing Spring-Loaded Dressing Stick Attachment All Aluminum & Stainless Steel Construction
HALE PET DOOR INSTALLATION INSTRUCTIONS HALE STANDARD PANEL MODEL
HALE PET DOOR INSTALLATION INSTRUCTIONS HALE STANDARD PANEL MODEL Please read these instructions carefully and completely before attempting to install Hale Pet Doors; they will guide you through the steps
Die casting Figure M2.3.1
Die casting Die casting is a moulding process in which the molten metal is injected under high pressure and velocity into a split mould die. It is also called pressure die casting. The split mould used
It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool
It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool H Craft Print Project No. 272 ERE'S a metal bender that will enable you to bend
indexable Center Drill
Our innovative tooling design upgrades productivity and competitive capability while reducing production requirements in a range of industries. The tooling system is designed to benefit users of machining
Cutting Tool Materials
Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of cutting tool metallurgy and specific tool applications for various
COATED CARBIDE. TiN. Al 2 O 3
COATED CARBIDE GENERAL INFORMATION CVD = Chemical Vapour Deposition coated grades GC2015, GC2025, GC2135, GC235, GC3005, GC3015, GC3020, GC3025, GC3115, GC4015, GC4025, GC4035, S05F, and CD1810. PVD =
Three Key Elements of a Cutting Tool
End Mill Training Three Key Elements of a Cutting Tool Geometry Cutting Tool 3 Elements Needed in a Good Cutting Tool Well Balanced For Best Performance Only Good as the Weakest Link End Mill Terms A -
Micro Precision Tools Your partner for precision applications
Micro Precision Tools Your partner for precision applications 2K Softgrip Micro Screwdrivers (page 72-73) Working in restricted areas is a particular problem especially in modern equipments, such as electronic
AISI O1 Cold work tool steel
T OOL STEEL FACTS AISI O1 Cold work tool steel Great Tooling Starts Here! This information is based on our present state of knowledge and is intended to provide general notes on our products and their
General Guidelines for Building Aluminum Production Injection Molds
General Guidelines for Building Aluminum Production Injection Molds Using 7000 series Aluminum Mold Plate By David Bank Aluminum Injection Mold Company Rochester, New York 1 Introduction This high strength
Technique Guide. Screw Removal Set. Instruments for removing Synthes screws.
Technique Guide Screw Removal Set. Instruments for removing Synthes screws. Table of Contents Introduction Screw Removal Set 2 Surgical Technique Preoperative Planning and Preparation 6 Removal of Intact
U-Max Chamfering endmill SPMT-WL 0.17 (0.08-0.21) -WH 0.35 (0.10-0.42) R215.64. Long edge cutter 215.3 0.17 (0.10-0.20) R215.3 -AAH 0.12 (0.08-0.
General Turning PROFILING Feed recommendations Feed per tooth, fz (mm/tooth) Insert geometry Insert size Starting value (min.- max.) U-Max Chamfering endmill SPMT-WL 0.17 (0.08-0.21) -WH 0.35 (0.10-0.42)
SOLDERING TERMINALS TRAINING CERTIFICATION TEST (DVD-18C)
This test consists of twenty multiple-choice questions. All questions are from the video: Soldering Terminals (DVD-18C). Each question has only one most correct answer. Use the Answer Sheet and circle
COLLEGE OF ENGINEERING AND APPLIED SCIENCE MACHINE SHOP TOOLS AND PRACTICES
COLLEGE OF ENGINEERING AND APPLIED SCIENCE MACHINE SHOP TOOLS AND PRACTICES I. OBJECTIVE To provide an overview and basic knowledge of the University of Wyoming, College of Engineering, equipment, tools,
172 Holesaws Overview Bosch Accessories for Power Tools 09/10. 189 Diamond holesaw. with Power-Change adapter. 190 Diamond drill bits
Holesaw 172 Holesaws Overview Bosch Accessories for Power Tools 09/10 Overview 178 Progressor holesaw 189 Diamond holesaw 196 Hole cutters 183 Sheet Metal holesaw 190 Diamond drill bits 186 Multi Construction
C-Plus Softgrip Screwdrivers
10 C-Plus Softgrip Screwdrivers The multi-purpose screwdrivers with 2K handles From professionals for professionals. Perfect in every detail the C-PLUS series is the result of long-lasting studies into
CORDLESS SCREWDRIVER + LAMP
CORDLESS SCREWDRIVER + LAMP Lightweight for fatigue-free work Ergonomically perfect design for any application Ideal for processing small and medium screws Magnetic bit holder Forward and reverse running
Ceta Form Tool Containers & Assortments
Ceta Form Tool Containers & Assortments Smart service solutions A50IM-79 79 Piece Industrial Maintenance Kit 2 C-Plus Phillips screwdrivers, PH1x80; PH2x100 mm F14 15 Upgrade Kits upgrade the basic kit
Right Angle Grinder USA MADE FLAP DISCS
USA MADE FLAP DISC Right Angle Grinder CGW Offers the Most Extensive Line of Flap Discs in the Marketplace CGW flap discs blend and finish in one operation which replaces the traditional twostep grinding
Milling Chuck Features
Milling Chuck Features Since its first introduction into the industry in 1963, Nikken has sold over 2,000,000 worldwide and never stopped improving its original design. Featuring multi-roller bearings
High speed machining and conventional die and mould machining
High speed machining and conventional die and mould machining Reprint from HSM - High Speed Machining There are a lot of questions about HSM today and many different, more or less complicated, definitions
Router Table Plans. www.bobsplans.com
www.bobsplans.com Router Table Plans Increase the capabilities of your router with this weekend project. Features a sliding fence with EZ-Mount clamps. These clamps are simple to make and grip tightly
ALFRA Rotabest Piccolo 32/50 Weldon Metal Core Drilling Machine. Operation Manual
ALFRA Rotabest Piccolo 32/50 Weldon Metal Core Drilling Machine Operation Manual 06/2005 1 1. Technical Data Prod. No.: 18550 Name : Rotabest Piccolo 32/50 Weldon Input: Load rpm: 1050 Watt 400 rpm Tool
CLASS # 18 POWER SHIP AUGER BITS
POWER SHIP AUGER BITS Used in the construction industry, auger bits are used for deep bore drilling. They are well suited for use where small nails or other material may be present. These bits have a resharpenable
413 NOVA SYSTEM PAN AMERICAN TOOL CORPORATION 5990 NW 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX
413 NOVA SYSTEM 5990 NW 31st Avenue Ft. Lauderdale, Florida 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX (954)735-8668 2013 Pan American Tool Corporation 2013 TERMS AND CONDITIONS TERMS:
Module 3 Machinability. Version 2 ME, IIT Kharagpur
Module 3 Machinability Lesson 1 Cutting Tool Materials of common use Instructional Objectives At the end of this lesson, the students will be able to (i) Identify the needs and cite the chronological development
EVEN FOR SMALL QUANTITIES WE GET STARTED RIGHT AWAY...
EVEN FOR SMALL QUANTITIES WE GET STARTED RIGHT AWAY... Because we produce in-house, so we don t have far to go. Our decisions are not based on when and who can do what in Asia; instead, we look at what
FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER Please read before beginning Stainless steel hardware
Alfra Rotabest 100 Metal Core Drilling Machine. Operation Manual
Alfra Rotabest 100 Metal Core Drilling Machine Operation Manual 06/2005 1. Technical Data Prod. No.: 18630 Name : Rotabest 100 Input: Load rpm: 1800 Watt 110/175/245/385 rpm Tool Holder : MT 3 Coolant
IKG Bar Grating: Anchoring
IKG Bar Grating: Anchoring All bar grating must be tightly fastened in place. Welding of the grating panels to the supporting members provides a superior, permanent installation. Although, for gratings
DSM http://www.dsmmfg.com 1 (800) 886-6376
DESIGN GUIDE FOR BENT SHEET METAL This guide discusses how the bends are made, what thicknesses of sheet metal are commonly used, recommended bend radius to use when modeling the part, some practical limits
An Introduction to Spiral Retaining Ring Installation and Removal
An Introduction to Spiral Retaining Ring Installation and Removal FACTS AND FIGURES OF SPIRAL RETAINING RINGS Retaining Rings act as a removable shoulder on a shaft or in a bore. When installed in a groove,
LEADER IN CUTTING TECHNOLOGY
LEADER IN CUTTING TECHNOLOGY FOR OVER 2 YEARS REASONS WHY TRONEX IS THE BEST IN THE WORLD 1 2 SUPERIOR CUTTING PERFORMANCE Cut hundreds of thousands of times before dulling. Cut hundreds of thousands of
* Provided that the overall length is within the minimum length parameter of the Gen II blank that is machined.
PLEASE SEE GEN II CUSTOM VALVE SPECIFICATIONS PAGES 42 & 43 CUSTOMER NAME CUSTOMER SIGNATURE DATE By signing this form I accept the goods are nonreturnable for credit and that Manley takes no responsibility
How To Make A Spiral Fluted And Wire Wrapped Dagger Handle
Making A Spiral Fluted and Wire Wrapped Dagger Handle By: Steve Culver, MS Part 1 Making A Spiral Fluted and Wire Wrapped Dagger Handle By: Steve Culver, MS After the rough handle material is drilled through
Step-by-step instructions:
Spark plug thread repair for Ford Triton cylinder heads Step-by-step instructions: Identification Installation Verification Specifically designed and tested for 4.6L, 5.4L, and 6.8L 2 and 4 valve heads,
Precision Vise Combinations
Precision Vise Combinations PanaVise vises and work holding tools have hundreds of uses limited only by your imagination! Each vise allows the head to Tilt, Turn & Rotate and position your work anywhere
THE ORIGINAL NAME IN HOLE CUTTING SYSTEMS
THE ORIGINAL NAME IN HOLE CUTTING SYSTEMS ABOUT US About Rotabroach Rotabroach is the original name in annular cutting technology. With over 40 years of experience in our industry, we have developed the
Ceta Form Hex and TORX L Keys A complete range of industrial quality keys
Ceta Form Hex and TORX L Keys A complete range of industrial quality keys We present a complete range of industrial quality L keys from standard hex to TORX allowing virtually any application. All the
Chapter 6 Machining Center Carbide Insert Fundamentals
This sample chapter is for review purposes only. Copyright The Goodheart-Willcox Co., Inc. All rights reserved. N10G20G99G40 N20G96S800M3 N30G50S4000 N40T0100M8 N50G00X3.35Z1.25T0101 N60G01X3.25F.002 N70G04X0.5
Coated Abrasives. Hand Sanding Sheets
Hand Sanding Sheets 21 Hand Sanding Sheets Paper Sheets PB013 FLINT LIGHT PAPER SHEETS PB013 (flint light paper) Abrasive: Flint Backing Material: Light paper Economy product For use on paint, soft wood,
Ceta Form Bits & Accessories
Ceta Form industrial quality bits program helps workshops, factories, assembly lines and technicians in various trades to increase the efficiency of their businesses thanks to durability of our bits which
Milling. COPYRIGHT 2008, Seco Tools AB 1/111
Milling 1/111 2/111 Milling A simple choice! Experts required? No Just follow some basic rules. 3/111 Face milling 4/111 Square shoulder milling 5/111 Disc milling 6/111 Copy milling 7/111 Plunge milling
Chapter 5 - Aircraft Welding
Chapter 5 - Aircraft Welding Chapter 5 Section A Study Aid Questions Fill in the Blanks 1. There are 3 types of welding:, and, welding. 2. The oxy acetylene flame, with a temperature of Fahrenheit is produced
There is no upside to. down time
EXPANDED and PERFORATED Data and Specifications 30 Similar to Type 302 with excellent mechanical properties, resistance to many corrosive agents. Useful where sanitation and cleanliness are important.
1958-64 WINDOW CHANNEL, WEATHERSTRIP & WHISKER STRIP REPLACEMENT FOR 2-DOOR SEDANS
By Denny Williams Photos by Denny Williams 1958-64 WINDOW CHANNEL, WEATHERSTRIP & WHISKER STRIP REPLACEMENT FOR 2-DOOR SEDANS Denny Williams - Technical Writer Denny is first and foremost a dyed-in-thewool
Bonded Abrasives. Precise cutting and grinding discs for many materials
Bonded Abrasives Precise cutting and grinding discs for many materials 1 sia Abrasives Your key to a perfect surface Many materials hide a secret. They keep their real beauty hidden. Only a professional
Guidelines for Earthquake Bracing of Residential Water Heaters
Guidelines for Earthquake Bracing of Residential Water Heaters Department of General Services Division of the State Architect 1102 Q Street, Suite 5100 Sacramento, CA 95814 Phone: (916) 324-7099 Fax: (916)
Document number RS-PRD-00130 Revision 05 Date 20/10/2009 Page 1/30
Date 20/10/2009 Page 1/30 1. Purpose This document describes the field replacement of the footscan plate cable for these models: 2m hi-end plate SN 11/5/xxx 2m pro plate SN 7/5/xxx 0.5m 2003 hi-end plate
GEOMETRY OF SINGLE POINT TURNING TOOLS
GEOMETRY OF SINGLE POINT TURNING TOOLS LEARNING OBJECTIVES Introduction to Features of single point cutting tool. Concept of rake and clearance angle and its importance System of description of Tool geometry
Product # Overall Length Claw Blade Width Head Width Weight 55-099 18 in (457 mm) 1-1/2 in (38 mm) 6-1/2 in (165 mm) 4.51 lbs (2.
Stanley Hand tools stanley Fubar Forcible entry tools Forcible entry tool designed by responders for vehicle extrication and extreme demolition. 8-in-1 tool for prying, splitting, board bending and striking
Introduction to JIGS AND FIXTURES
Introduction to JIGS AND FIXTURES Introduction The successful running of any mass production depends upon the interchangeability to facilitate easy assembly and reduction of unit cost. Mass production
NetShape - MIM. Metal Injection Molding Design Guide. NetShape Technologies - MIM Phone: 440-248-5456 31005 Solon Road FAX: 440-248-5807
Metal Injection Molding Design Guide NetShape Technologies - MIM Phone: 440-248-5456 31005 Solon Road FAX: 440-248-5807 Solon, OH 44139 solutions@netshapetech.com 1 Frequently Asked Questions Page What
THE INFLUENCE OF STEEL GRADE AND STEEL HARDNESS ON TOOL LIFE WHEN MILLING IN HARDENED TOOL STEEL
THE INFLUENCE OF STEEL GRADE AND STEEL HARDNESS ON TOOL LIFE WHEN MILLING IN HARDENED TOOL STEEL S. Gunnarsson, B. Högman and L. G. Nordh Uddeholm Tooling AB Research and Development 683 85 Hagfors Sweden
SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB
SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB PRODUCT DESCRIPTION: BOON EDAM TOMSED MODEL TUT-65TMB STAINLESS STEEL BARCODE SCANNING ELECTRONIC REGISTERING TURNSTILE SCOPE OF OPERATION: A. The TUT-65TMB
PROVEN SOLUTIONS FLIUD END MACHINING FLUID END MACHINING PROVEN SOLUTIONS & TOOLING
PROVEN SOLUTIONS FLIUD END MACHINING FLUID END MACHINING PROVEN SOLUTIONS & TOOLING SECO PROVEN SOLUTIONS WILL IMPROVE YOUR PROCESS When you partner with Seco, our team of metalworking experts evaluate
DURO DYNE EAST CORP. Bay Shore, NY 11706 DURO DYNE MIDWEST Fairfield, OH 45011 DURO DYNE WEST Santa Fe Springs, CA 90670 DURO DYNE INTERNATIONAL Bay
DURO DYNE EAST CORP. Bay Shore, NY 11706 DURO DYNE MIDWEST Fairfield, OH 45011 DURO DYNE WEST Santa Fe Springs, CA 90670 DURO DYNE INTERNATIONAL Bay Shore, NY 11706 Super Sabers Self Piercing Screws For
Technique Guide. Reamer/Irrigator/Aspirator (RIA). For intramedullary reaming and bone harvesting.
Technique Guide Reamer/Irrigator/Aspirator (RIA). For intramedullary reaming and bone harvesting. Table of Contents Introduction Reamer/ Irrigator/ Aspirator (RIA) 2 Indications 4 Surgical Technique Preparation
Section V Removing Frozen or Broken Fasteners & Taps
154 CHAPTER 6 THREADS & THREADING Section V Removing Frozen or Broken Fasteners & Taps Frozen or Broken Fastener Removal What are the common methods for removing frozen or broken threaded fasteners? Here
TopSky DLG Installation Manual
TopSky DLG Installation Manual Attention: Because after the compound materials solidify, there will be ammonia iris on the surface, which affect the bonding strength afterwards. Please polish with sandpaper
Guidelines for Earthquake Bracing Residential Water Heaters
Guidelines for Earthquake Bracing Residential Water Heaters Department of General Services Division of the State Architect In accordance with the Health and Safety Code Section 19215, the Division of the
Catalogue. electric- and cordless power tools. Products for sheet metal processing. Machine Tools / Power Tools Laser Technology / Electronics
Catalogue electric- and cordless power tools Products for sheet metal processing Machine Tools / Power Tools Laser Technology / Electronics Innovative tools Contents: 2 Page Page Page 4 8 9 New battery
Making Clock Wheel & Pinion Cutters
Making Clock Wheel & Pinion Cutters When making hand made clocks or in repair work an odd size cutter is sometimes needed. Sometimes just one pinion is required and does not justify the cost of a commercial
Plumbing. www.armeg.co.uk. The convenient, compact and clever solutions to your wrench and hand tool needs
INNOVATIVE DRILLING & TOOL SOLUTIONS www.armeg.co.uk Plumbing The convenient, compact and clever solutions to your wrench and hand tool needs Complete Heating Installation with PHI Wrench Set Easy Tap
Pepper Mill Instructions by Fred Kachelhofer
by Fred Kachelhofer I have seen Nick Cook turn a pepper mill twice and read his article posted at http://www.nickcookwoodturner.com/articles.htm (follow link and then click on Pepper Mill ). I have had
1.8 CRANKSHAFT OIL SEALS
SERIES 60 SERVICE MANUAL 1.8 CRANKSHAFT OIL SEALS An oil seal is fitted between each end of the crankshaft and the bores of the flywheel housing and gear case cover to retain the lubricating oil in the
Understanding the Wire EDM Process
5 Understanding the Wire EDM Process 69 Accuracy and Tolerances Wire EDM is extremely accurate. Many machines move in increments of 40 millionths of an inch (.00004") (.001 mm), some in 10 millionths of
Step by Step instructions How to screw in wood and plastic
Step by Step instructions How to screw in wood and plastic Different screw heads As well as the simple slotted screw head, there are three different types of screw heads into which the screwdriver or bit
FREEBIRD THE ORIGINAL D.I.Y. ORNITHOPTER! Tools and Glue. Required Materials
Do not try to make your ornithopter using "household materials". If you want it to fly, you have to build it right. FREEBIRD THE ORIGINAL D.I.Y. ORNITHOPTER! Wingspan: 16 inches Weight: 1/4 ounce The Ornithopter
Lathe Milling Attachment
Lathe Milling Attachment By L C. MASON BY CLEVERLY stacking cold-rolled flat stock together, T-slots and slide for this lathe milling attachment are made without costly machinery. In fact, only two tools,
The Ensat self-tapping threaded insert...
The Ensat selftapping threaded insert... Ensat is a selftapping threaded insert with external and internal thread, cutting slots or cutting bores. A continuous process of further development has brought
www.cornholesupplies.com
www.cornholesupplies.com How To Build Regulation Cornhole Boards Home of the Original Cornhole Bags and Boards Supply List: 1-4' X 8' Piece of Plywood (pre sanded) 4-2" X 4" X 8' Studs (2 by 4s make sure
Milling & Machining Centers
Training Objective After watching the program and reviewing this printed material, the viewer will gain knowledge and understanding of basic milling theories and procedures. In addition, the viewer will
Roloc TM. Discs. Easy to mount easy to change
Roloc TM Discs Provide a fast, efficient method for deburring, blending, finishing, removing tool marks and die polishing on all types of metals. Resist loading and shelling under severe operating conditions.
Rollers. from the UK s largest roller manufacturer. Quality Performance Reliability
Rollers from the UK s largest roller manufacturer Quality Performance Reliability 42 Index Gravity Rollers Light to Medium Duty 4 Heavy Duty 5 Plastic Rollers 6 Stainless Steel Rollers 7 Grooved Rollers
REQUEST FOR QUOTE. Material $ Labor/Installation $ tax $ Total $ Material $ Labor/Installation $ tax $ Total $
REQUEST FOR QUOTE Specifications- Knightdale Station Park Naming Rights Exterior Signage General Conditions 1. Delivery of signs to be within 6 weeks of order confirmation. 2. Shop drawings are required
Professional HEX Tools Inch & Metric
Complete Hex Program Professional HEX Tools Inch & Metric 2 Toll Free: (800) 494-6104 Wiha Hex Tools Index DESCRIPTION Page T-handles 8 PocketStar Fold Outs 16 L-keys - Long/Short 17-20 Nickel & Black
LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions
LORTONE LU6X-130 Item # 061-092 LU6X Basic Item # 061-090 LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions Introduction The LU6X is one the most versatile pieces of equipment
Hand Crank Generator (9 May 05) Converting a Portable Cordless Drill to a Hand Crank DC Generator
Converting a Portable Cordless Drill to a Hand Crank DC Generator The unit is light weight (2.5 lb), portable, low cost ($10-$20) and can be used to recharge single cell batteries at from 1-3.5 amps. It
Technical Services & Capabilities
Technical Services & Capabilities Machining Welding MIG TIG Robotic TIG Friction Stir Welding Solution Heat Treat & Artificial Aging Assemblies & Fabrication Bike Frame Specialists Technical Services Product
Meet the new freud. New Products: Innovations as well as heavy investment in up to date technology in the plants for superior product quality.
Meet the new freud 10 LSB45017X Meet the new freud 1 0.35 PATENTED SYSTEMS Ø450x4.8/3.5x60 Z72 HW n max 4200 RPM 8935 PATENTED SYSTEMS New Products: Innovations as well as heavy investment in up to date
CUTTING TOOL TECHNOLOGY. 1. Tool life 2. Tool Materials 3. Tool Geometry 4. Cutting fluids
CUTTING TOOL TECHNOLOGY 1. Tool life 2. Tool Materials 3. Tool Geometry 4. Cutting fluids 1 Introduction Machining is accomplished by cutting tools. Cutting tools undergo high force and temperature and
GENERAL INFORMATION ORDERING INFORMATION
GENERAL INFORMATION Lenco 2 THE LENCOSPOT MARK II Autobody Dual-Spot Welder Offers All These Features: Protected Control Panel Streamlined Construction On/Off Indicating Switch Solid State Timer Tool Storage
TECHNICAL INFORMATION
TECHNICAL INFORMATION Models No. 2012NB Description 304mm (12") Automatic Thickness Planer CONCEPTION AND MAIN APPLICATIONS * Compact and light weight (27 Kg./59 lbs) automatic thickness planer for easier
Dave s Sheet Metal Bending Brake
Dave s Sheet Metal Bending Brake I started building a Zenith CH601XL from plans in mid January 2006. After several failed attempts to bend the rudder spar I ended up going to a local sheet metal shop for
SPIRAL STAIR KIT INSTALLATION MANUAL
SPIRAL STAIR KIT INSTALLATION MANUAL Effective January 1, 2014 If you have any questions, please call the location that your Stair Kit was purchased from: Broomall, Pennsylvania 1-800-52-7427 Ontario,
Varel International Workover Bits for remedial, re-entry AND frac plug Drilling Applications
Varel International Workover Bits for remedial, re-entry AND frac plug Drilling Applications Varel International offers the industry's broadest selection of high quality drill bits for remedial, re-entry
SS-EN ISO 9001 SS-EN ISO 14001
This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as a warranty of specific properties
Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable.
1 von 9 Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
How To Replace A Reverse Osmosis Water Tank
ALL MODELS REVERSE OSMOSIS WITH NONAIRGAP FAUCET 1. Read all instructions carefully before starting installation. 2. Find the cold water line beneath your sink. The cold water is typically on the right.
Lapping and Polishing Basics
Lapping and Polishing Basics Applications Laboratory Report 54 Lapping and Polishing 1.0: Introduction Lapping and polishing is a process by which material is precisely removed from a workpiece (or specimen)
RAMAX S Prehardened stainless holder steel
T O O L S T E E L F A C T S RAMAX S Prehardened stainless holder steel Wherever tools are made Wherever tools are used This information is based on our present state of knowledge and is intended to provide
Gear PEPSI CAN STOVE INSTRUCTIONS
Gear PEPSI CAN STOVE INSTRUCTIONS [NOTE: Updated Instructions are now available. The new stove is less likely to develop flame leaks and the fuel/air mixture is improved. Instructions for a simmer ring