CAT. No. KS-570E. SCS Single Action Push Type. SCD Double Action Type. super. cylinder FUJIKURA RUBBER LTD.
|
|
- Vanessa Riley
- 7 years ago
- Views:
Transcription
1 CAT. No. KS-570E SC SCS Single Action Push Type SCD Double Action Type super cylinder FUJIKURA RUBBER LTD.
2 General Description of BF Cylinders FC Series : Single/Double Action Standard Cylinders SC Series : Single/Double Action Super Cylinders PC Series : Single/Double Action Pocket Cylinders TC Series : Single Thin Cylinders TD Series : Double Action Thin Cylinders BF Cylinders are bound together by unique unrivaled common features, which are all attributable to the rolling action of BF Diaphragms. Perfect Leak-proof Very Low Friction Lubrication-Free Excellent resistance to pressure No Blow-By Leakage. : Responsive to minute pressure variations. : Virtually no hysteresis- loss in movement. : Low start up pressure as low as 0.01MPa. : Smooth "Non- Jarring" action. : Ready to start even after long interval. No Lubricator required in the air line. Assured by the rolling principle of BF Diaphragms. ( Molded products of durable fabric-reinforced NBR) BF Cylinders find its best applications in such cases where air leakage is not allowed and/or sensitive response is desired to minute pressure variations. Sensitive Actuators in Automatic Controllers & Instruments, Pressure rollers and Dancer rollers. Air line equipment in the clean factories disliking oil mist contamination. Polishing equipment for Lenses and Jewels. Precision actuators of constant output force. ( Spot welder etc.) Actuator for emergency use. 1
3 s c uper ylinder SC Model SCS: Single Action(Push) SPECIFICATIONS Model SCD: Double Action Operating Style Single Action (Push) / Double Action Cylinder Diameter Stroke Single Double Working Fluid Working Pressure Range Working Temperature Range Rod Bearing Mounting Compressed Air (Non-Lubricated) Linear ball bearing without seal, Linear ball bearing with seal on both sides Direct, L, Front Flange, Rear Flange,Trunnion, Pivot-Mounting SC Series is equipped with a linear ball bearing, having the same dimensions and structure as FC Series, to maximize the features of the BF diaphragm. The frictional resistance is smaller than the conventional types. The pressure fluctuation following capability is excellent. Operation is possible even under very small pressure. This series can be used as an ideal actuator for the following control operations: To ensure correct control under low pressure Control of tension of printing machines and plastic production facilities Control of contact pressure of textile processing and metalworking machines Control of pressing force of polishing machines and testers SCD S0 B0 P Cylinder dia. Stroke SCS SCD Model No. Single Action Double Action None S0 S1 B0 B1 Spring In case of FCD None Standard Spring Bearing Linear ball bearing without seal Linear ball bearing with seal on both sides Mount None --- L L F Front Flange R Rear Flange T Trunnion P Pivot 2
4 INTERNAL CONSTRUCTION/PARTS DESCRIPTION SINGLE ACTION TYPE PARTS LIST DESCRIPTION Bonnet F/R O-Ring Piston MATERIAL NBR Alloy Casting A Cylinder/Spacer A Alloy Rod BF Diaphragm Return Spring Bearing Hole Stopper Ring Tie Rod A Alloy Die-Casting A Alloy Casting (FCS-0 & over) Stainless Steel Hard Steel, Hard Chrome Plated (FCS-80 & over) Fabric Reinforced NBR Spring Steel Wire Linear Ball Bearing Steel (SKS) Carbon Steel Note : 1. A parts are anodic treated. 2. Unless otherwise specified, steel parts are galvanized. 3. A die-casting parts are bake painted. DOUBLE ACTION TYPE PARTS LIST DESCRIPTION Bonnet F/R O-Ring Piston BF Diaphragm F Ass'y MATERIAL A Alloy Die-Casting A Alloy Casting (FCS-0 & over) NBR Alloy Casting A Cylinder/Spacer A Alloy Rod Stainless Steel Hard Steel, Hard Chrome Plated (FCS-80 & over) Fabric Reinforced NBR with Fitting Caulked BF Diaphragm Fabric Reinforced NBR Return Spring Spring Steel Wire Bearing Linear Ball Bearing Hole Stopper Ring Steel (SKS) Tie Rod Carbon Steel Note : 1. A parts are anodic treated. 2. Unless otherwise specified, steel parts are galvanized. 3. A die-casting parts are bake painted. 3
5 s c uper ylinder SPECIAL TYPE CYLINDER SCD-40 0 SUPER CYLINDER DOUBLE ACTION TYPE PARTS LIST DESCRIPTION Bonnet F/R O-Ring Piston BF Diaphragm F Ass'y MATERIAL A Alloy Die-Casting A Alloy Casting (FCS-0 & over) NBR Alloy Casting A Cylinder/Spacer A Alloy Rod Stainless Steel Hard Steel, Hard Chrome Plated (FCS-80 & over) Fabric Reinforced NBR with Fitting Caulked BF Diaphragm Fabric Reinforced NBR Return Spring Spring Steel Wire Bearing Linear Ball Bearing Hole Stopper Ring Steel (SKS) Tie Rod Carbon Steel Note : 1. A parts are anodic treated. 2. Unless otherwise specified, steel parts are galvanized. 3. A die-casting parts are bake painted. Fujikura BF Cylinders 4
6 SCS Outline Dimensions OUTLINE DIMENSIONS F0/F1 : Spring force at zero/full stroke (N) Ae : Effective area (mm 2 ) N : Wrench flat width DcSTROKE A B C D E F G H I J K L M N O P Q R S T Ae SPRING FORCE M Rc 1/ M 6DP M M 1. 6 Rc 1/8 50 M 6DP M M Rc 1/ M 8DP M M 1.5 Rc 1/4 80 M 8DP M M Rc 1/4 98 MDP M M Rc 3/ MDP M M Rc 3/ MDP M M Rc 3/ M12DP M L Type Mount Ds-STROKE AA AB AC AD AE AF AG AH AI AJ AK Front Flange Type Mount Ds-STROKE BA BB BC BD BE BF BG BH BI
7 s c uper ylinder Rear Flange Type Mount Ds-STROKE BA BB BC BD BE BF BG BJ Trunnion Type Mount Ds-STROKE CA CB CC CD CE CF CG CH Pivot Type Mount Ds-STROKE DA DB DC DD DE DF DG DH DI M M M M M M M M1235 DE : Bearing Size No. 6
8 SCD Outline Dimensions OUTLINE DIMENSIONS Ae : Effective area (mm 2 ) N : Wrench flat width DcSTROKE A B C D E F G H I J K L M N O P Q R S T Ae M 81 6 Rc 1/ M 6 DP M M 1. 6 Rc 1/8 50 M 6 DP M M Rc 1/ M 8 DP M M 1.5 Rc 1/4 80 M 8 DP M M Rc 1/4 98 M DP M M Rc 3/ M DP M M Rc 3/ M DP M M Rc 3/ M12 DP M L Type Mount Ds-STROKE AA AB AC AD AE AF AG AH AI AJ AK Front Flange Type Mount Ds-STROKE BA BB BC BD BE BF BG BH BI
9 s c uper ylinder Rear Flange Type Mount Ds-STROKE BA BB BC BD BE BF BG BJ Trunnion Type Mount Ds-STROKE CA CB CC CD CE CF CG CH Pivot Type Mount Ds-STROKE DA DB DC DD DE DF DG DH DI M M M M M M M M1235 DE : Bearing Size No. 8
10 SCS Outline Dimensions OUTLINE DIMENSIONS F0/F1 : Spring force at zero/full stroke (N) Ae : Effective area (mm 2 ) N : Wrench flat width DcSTROKE A B C D UD E F G H I J K L M N O P Q R S T U V Ae SPRING FORCE M M Rc 1/ M DP M M Rc 1/ M DP M M Rc 3/ M DP F0 F1 L Type Mount DcSTROKE AA AB AC AD AE AF AG AH AI AJ AK M M M Front Flange Type Mount DcSTROKE BA BB BC BD BE BF BG BH BI M M M
11 s c uper ylinder Rear Flange Type Mount DcSTROKE BA BB BC BD BE BF BG BJ M M M Trunnion Type Mount DcSTROKE CA CB CC CD CE CF CG CH Pivot Type Mount DcSTROKE DA DB DC DD DE DF DG DH DI M M M DE : Bearing Size No.
12 SCD Outline Dimensions OUTLINE DIMENSIONS DcSTROKE A B C D UD E F G H I J K L M N O P Q R S T Ae : Effective area (mm 2 ) N : Wrench flat width Ae M M Rc 1/ M DP M M Rc 1/ M DP M M Rc 3/ M DP L Type Mount DcSTROKE AA AB AC AD AE AF AG AH AI AJ AK M M M Front Flange Type Mount DcSTROKE BA BB BC BD BE BF BG BH BI M M M
13 s c uper ylinder Rear Flange Type Mount DcSTROKE BA BB BC BD BE BF BG BJ M M M Trunnion Type Mount DcSTROKE CA CB CC CD CE CF CG CH Pivot Type Mount DcSTROKE DA DB DC DD DE DF DG DH DI M M M DE : Bearing Size No. 12
14 13
15 MEMO Fujikura BF Cylinders
16 Note:Specifications subject to change without notice for improvements and modifications. Fujikura's Pneumatic Control Products Line General Guide CAT. No. KS-572E Super Precision Air Regulators RS Super Precision Air Relays RR CAT. No. KS-128E Compac Super Precision Air Regulators RS2 CAT. No. KS-0394E Precision Air Regulators RP CAT. No. KS-129E Compact Precision Air Regulators RP2 CAT. No. KS-0393E Precision Electro-Pneumatic Transducers RT CAT. No. KS-130E Super Precision Electro-Pneumatic Transducers RT2 CAT. No. KS-0395E Precision Vacuum Pressure Regulators RV CAT. No. KS-131E Miniature Precision Vacuum Pressure Regulators RV2 CAT. No. KS-0305E Miniature Regulators RA RB CAT. No. KS-794E Thin-Type Precision Air Regulators RP1 CAT. No. KS-183E Miniature Precision Air Regulators RG1 CAT. No. KS-198E Relief Regulators VR1 CAT. No. KS-187 Fujikura BF Cylinder FC CAT. No. KS E SC CAT. No. KS-9137E PC CAT. No. KS TC CAT. No. KS TD CAT. No. KS-0373 Please request respective catalog for detailed contents of each product. Control Equipment Division : 1-840, Mihashi, Omiya-ku, Saitama , JAPAN Phone: Facsimile: cegs@fujikurarubber.com URL
Pattern Co. Monkey Trouble Wall Quilt. Size: 48" x 58"
.............................................................................................................................................. Pattern Co..........................................................................................
More informationService Instruction. 1.0 SUBJECT: ECi Accessory Cases for Lycoming 4-Cylinder engines with single magneto configurations and TITAN 361 Engines
Title: Service Instruction ECi Accessory Cases Installed on Engines S.I. No.: 03-1 Page: 1 of 7 Issued: 2/28/2003 Revision: 2 (4/13/2009) Technical Portions are FAA DER Approved. 1.0 SUBJECT: ECi Accessory
More informationCROSS REFERENCE. Cross Reference Index 110-122. Cast ID Number 110-111 Connector ID Number 111 Engine ID Number 112-122. 2015 Ford Motor Company 109
CROSS REFERENCE Cross Reference Index 110-122 Cast ID Number 110-111 Connector ID Number 111 112-122 2015 Ford Motor Company 109 CROSS REFERENCE Cast ID Number Cast ID Ford Service # MC Part # Part Type
More informationCylinders Series 40. Double acting, cushioned, magnetic ø160-200 - 250 (DIN/ISO 6431)
Cylinders Series 40 Double acting, cushioned, magnetic ø60-200 - 250 (DIN/ISO 643)»»» DIN/ISO 643 VDMA 24562 Rolled stainless steel rod Adjustable cushioning The cylinders Series 40 with diameters 60,
More informationVisa Smart Debit/Credit Certificate Authority Public Keys
CHIP AND NEW TECHNOLOGIES Visa Smart Debit/Credit Certificate Authority Public Keys Overview The EMV standard calls for the use of Public Key technology for offline authentication, for aspects of online
More informationStainless Linear Motion Rolling Guide series
products are avaiable from: MARYLAND METRICS phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329 P.O.Box 261 Owings Mills, MD 21117 USA URL: http://mdmetric.com E-mail: sales@mdmetric.com
More informationCylinders DIN ISO 6431 and VDMA 24 562
Double acting Standard executions Version Shape of barrel Symbol Type MAGNETIC STANDARD AMA AMT 1 For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed swiches/brackets
More information*Rated to 207 Bar/3000 PSI with Aluminum Body. Denotes New Winner s Circle Product Line. Catalog HY15-3502/US
Bodies & Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI STANDARD CHECKS D1A6... 2U... Valve Insert, Ball Type...145/38... 42/6... 5 D1B125... 2C... Valve Insert, Ball Type...
More informationCompact cylinder Double acting single rod type. SSD SSD-L (with switch) Double acting Compressed air 1.0. 1.6-10 to 60 (no freezing) Rc1/8 Rc1/4 Rc3/8
* U S 4 Specifications escriptions Bore size mm Actuation Working fluid ax. working pressure Pa in. working pressure Pa Withstanding pressure Pa Ambient temperature Port size Stroke length Rubber cushioned
More informationS GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
More informationillustration ref. no. description SWAG no. RS Kombi, Octavia Scout 4x4, Octavia 4x4 for: Octavia, Octavia Kombi
Skoda protection Kit for strut 20 56 0003 - for: Fabia Skoda protection Kit for strut 30 56 0010 for: Felicia I, Felicia II - Skoda protection Kit for strut 30 56 0029, Octavia Kombi 4x4, Octavia RS, Octavia
More informationRotary actuators Rotary wing drives Series RAK. Brochure
Brochure 2 Rotary wing drives, angle of rotation: 30-270 Rotary wing drive, double-acting axis geometry: single 4 Rotary wing drives, angle of rotation: 90-270 Rotary wing drive, double-acting axis geometry:
More informationDOUBLE GATE KNIFE GATE VALVE
DOUBLE GATE KNIFE GATE VALVE The model knife gate is a bi-directional valve widely used in the Pulp and Paper industry (recycling or secondary fibre processing) designed to handle high concentrated or
More informationRotary Actuators, NAMUR interface VDI/VDE 3845 & ISO 5211 (ATEX certified) Series ARP
NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8. Rotary Actuators and Grippers Rotary Actuators, NAMUR interface VDI/VDE 384 & ISO 211 (ATEX certified) Series ARP Model: Rack & Pinion - Rotational
More informationExtruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 62
1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 62 Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80,
More informationTyco PremiAir Pneumatic Actuators
A comprehensive range of pneumatic actuators, conforming to EN ISO 5211, providing compact, reliable and economical powered operation for all types of quarter turn valves. Features Mounting to valve either
More informationCommunity College of Philadelphia Calling Code 218 Employer Scan Client Approved: November 17, 2005 Region (CIRCLE) City MSA
Community College of Philadelphia Calling Code 218 Employer Scan Client Approved: November 17, 2005 Region (CIRCLE) City MSA Zip V0 V1 V2 Month/ Day/ Year of Contact: Business Name: Address: V3 City: V4
More informationAPPLIED PNEUMATICS AND HYDRAULICS H TUTORIAL HYDRAULIC AND PNEUMATIC CYLINDERS. This work covers part of outcome 2 of the standard Edexcel module.
APPLIED PNEUMATICS AND HYDRAULICS H TUTORIAL HYDRAULIC AND PNEUMATIC CYLINDERS This work covers part of outcome 2 of the standard Edexcel module. The material needed for outcome 2 is very extensive so
More informationT-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5. www.thomsonlinear.com
T-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5 www.thomsonlinear.com Version History Edition Number Edition Date Reason for Revision 1 2004 First edition
More information*Rated to 207 Bar/3000 PSI with Aluminum Body. Catalog HY15-3501/US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO.
Bodies & Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. /GPM BAR/PSI STANDARD CHECKS D1A6... 2U... Valve Insert, Ball Type...145/38... 42/6... 5 D1B125... 2C... Valve Insert, Ball Type... 5/132...
More informationSOLICITATION/CONTRACT/ORDER FOR COMMERICAL ITEMS
SOLICITATION/CONTRACT/ORDER FOR COMMERICAL ITEMS 1. REQUISITION NUMBER PAGE 1 OF OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24 & 30 2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER 5. RFQ NUMBER 6.
More informationPrecision Regulator. Series IR1000/2000/3000 ARJ AMR ARM ARP IR IRV VEX1 SRH SRP SRF ARX20 VCHR ITV IC PVQ VER VEA VY2 AP100.
Precision Regulator Series // Basic Type Air Operated Type Series Model Regulating pressure range Page Series Series Series Series Series.5 to MPa. to MPa. to.8 MPa /8 55.5 to MPa. to MPa /4 55. to.8 MPa.
More informationProportional pressure regulators VPPE
Proportional pressure regulators VPPE Proportional pressure regulators VPPE Product range overview Function Version Pneumatic connection Proportional pressure regulator Nominal size for pressurisation/
More informationDHL EXPRESS CANADA E-BILL STANDARD SPECIFICATIONS
DHL EXPRESS CANADA E-BILL STANDARD SPECIFICATIONS 1 E-Bill Standard Layout A B C D E F G Field/ DHL Account Number Billing Customer Name Billing Customer Address Billing Customer City Billing Customer
More informationSITEMA PowerStroke. Technical Information TI-P11. 1 Function. 2 Applications. Mould Closing Devices series FSK. Contents
English translation of German original Technical Information TI-P11 SITEMA PowerStroke Mould Closing Devices series FS drive system for powerful forces on a short stroke hydraulic actuation closing force
More informationV&A PROCONTROL. Rotary Valve Actuators Pneumatic & Hydraulic On-Off / Control / ESD Double Acting Spring Return All Steel SIL 3
V&A PROCONTROL Rotary Valve Actuators Pneumatic & Hydraulic OnOff / Control / ESD Double Acting Spring Return All Steel SIL 3 V R VP Series Technical Information V&A Procontrol VP series pneumatic steel
More information"HIGHER EDUCATION VALUES AND OPINIONS SURVEY" ADVANCED PLACEMENT TEACHERS and GUIDANCE COUNSELORS May-June 1994
"HIGHER EDUCATION VALUES AND OPINIONS SURVEY" ADVANCED PLACEMENT TEACHERS and GUIDANCE COUNSELORS May-June 1994 VARIABLE SURVEY ANSWER NAME QUESTION CATEGORIES Facsimile the original mail questionnaire
More informationVictims Compensation Claim Status of All Pending Claims and Claims Decided Within the Last Three Years
Claim#:021914-174 Initials: J.T. Last4SSN: 6996 DOB: 5/3/1970 Crime Date: 4/30/2013 Status: Claim is currently under review. Decision expected within 7 days Claim#:041715-334 Initials: M.S. Last4SSN: 2957
More informationRUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
More informationSAFETY BLOCK type BS 9.3 E 01-12
SAFETY BLOCK type BS 9.3 E 01-12 9.3.1 TECHNICAL DATA MAX OPERATING PRESSURE (PS): 420 bar PRESSURE TEST (PT): 1.43 x PS NOMINAL PASSAGE DIAMETER: 10mm, 20mm, 25mm, 32mm WORKING TEMPERATURE: -40 +150 FLUID
More informationSITEMA PowerStroke. Technical Information TI-P12. 1 Function. 2 Applications. Mould Closing Devices series FSKP. Contents
SITEMA PowerStroke FSP ocking, actuating and releasing by pneumatic pressure English translation of German original Technical Information TI-P1 SITEMA PowerStroke Mould Closing Devices series FSP drive
More informationDirect Operated Regulator for 6.0 MPa (Relieving Type) How to Order. Body size 30 40
Direct Operated Regulator for (Relieving Type) Series Service life: 0 million cycles Using NSF-H-certified grease on the guide ring (sliding) part. Improved durability under a high environment with a polyurethane
More informationAcceptance Page 2. Revision History 3. Introduction 14. Control Categories 15. Scope 15. General Requirements 15
Acceptance Page 2 Revision History 3 Introduction 14 Control Categories 15 Scope 15 General Requirements 15 Control Category: 0.0 Information Security Management Program 17 Objective Name: 0.01 Information
More informationVehicle Identification Numbering System 00.03
Vehicle Identification Numbering System 00.03 IMPORTANT: See Subject 050 for the vehicle identification numbering system for vehicles built before May 1, 2000. Federal Motor Vehicle Safety Standard 115
More informationNEOSHO COUNTY COMMUNITY COLLEGE MASTER COURSE SYLLABUS. Medical Administrative Aspects
NEOSHO COUNTY COMMUNITY COLLEGE MASTER COURSE SYLLABUS COURSE IDENTIFICATION Course Code/Number: ALMA 120 Course Title: Medical Administrative Aspects Division: Applied Science (AS) Liberal Arts (LA) Workforce
More informationUnit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 2 HYDRAULIC AND PNEUMATIC CYLINDERS The material needed for outcome 2 is very extensive
More informationPiston Accumulators. SK Series. Accumulator Catalog. Piston Types. Description. Sealing Systems. End Cap. O-ring. Sealing System. Piston.
SK Series Piston Types TYPE 2 pplication: Low-friction design for higher piston speeds, slow movements without stick-slip effect and high number of actuations (millions). ctual cycles achieved will vary
More informationAIR-AIR PRESSURE MULTIPLIER (BOOSTER)
AIR-AIR PRESSURE MULTIPLIER (BOOSTER) The air-air pressure multiplier, or booster, is an automatic device that compresses air to give an outlet pressure that is double the inlet pressure. It is normally
More informationStainless Steel Cylinders DIN ISO 6431 and VDMA 24 562
Bores from 32 to 200 mm Double acting Standard executions Version Symbol TYPE MAGNETIC STANDARD AMX STAINLESS STEEL For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed
More informationPOWERS Controls No. 4 Pneumatic Damper Actuator
POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000
More informationFurniture Fittings Furniture Handles and Knobs
Handle profile - Aluminium 21 mm 1.5 mm 2,500 mm 126.21.02 30 mm 126.22.0 11.5 mm 1.5 mm 2,500 mm 126.20.05 AH.4 Dim. A Dim. B Length Usable length Cat. No. 34.5 mm 8.5 mm 2,500 mm 2,460 mm 126.15.00 Dim.
More informationMASTER CYLINDER. Section 2. Master Cylinder. Tandem Master Cylinder. Master Cylinder
MASTER CYLINDER Master Cylinder The master cylinder converts the motion of the brake pedal into hydraulic pressure. It consists of the reservoir tank, which contains the brake fluid; and the piston and
More informationcost-effective automation
cost-effective automation compact units for drilling tapping milling www.esystems.com AIR HYDRAULIC DRILLING UNIT BE(F) AND BE(FP) AIR HYDRAULIC DRILLING UNIT BE(F) The basic design of the BE(F) consists
More informationHOW TO ORDER SAFETY PRODUCTS/SAFETY CONTROL SYSTEMS ELECTRICAL SAFETY CONTROLS
HOW TO ORDER SAFETY PRODUCTS/SAFETY CONTROL SYSTEMS PNEUMATIC SAFETY CONTROLS BASIC CONTROLS SC3000 - SELF CONTAINED 2 HAND CONTROL - STAND ALONE MODEL SC3300 - SELF CONTAINED 2 HAND CONTROL - PRESS READY
More informationWILROY. Operation. Optional Diaphragm Rupture Detection HYDRAULICALLY ACTUATED DIAPHRAGM PUMP
WILROY ATEX Approved HYDRAULICALLY ACTUATED DIAPHRAGM PUMP Williams and Milton Roy have combined technologies to design a pump blending the proven mroy hydraulic by-pass diaphragm design with the Williams
More informationPneumatic Grippers Parallel and Angular Grippers. Catalog 1900-2/US
Pneumatic Grippers Parallel and Angular Grippers Catalog 19-2/US Catalog 19-2/US OContents GPR Series Rotary vane driven design GPR GPCR Series P5G-HPM(C) Series P5G-HP Series GPT Series P5G-AP Series
More informationNorbro Series 40R Pneumatic Actuator Double Acting or Spring Return
Pneumatic Actuator Double Acting or Spring Return Since the mid-sixties the Norbro name has been recognised as the leading quarter turn actuator for industry. As proof of this, Norbro pneumatic actuators
More informationDATING YOUR GUILD 1952-1960
DATING YOUR GUILD 1952-1960 YEAR APPROXIMATE LAST SERIAL NUMBER PRODUCED 1953 1000-1500 1954 1500-2200 1955 2200-3000 1956 3000-4000 1957 4000-5700 1958 5700-8300 1959 12035 1960-1969 This chart displays
More informationNSK Product Lineup for Machine Tools
NSK Product Lineup for Machine Tools We have two general catalogs on Super Precision and Precision Machine Components available, which contain detailed information related to our bearings and linear products.
More informationSERVER CERTIFICATES OF THE VETUMA SERVICE
Page 1 Version: 3.4, 19.12.2014 SERVER CERTIFICATES OF THE VETUMA SERVICE 1 (18) Page 2 Version: 3.4, 19.12.2014 Table of Contents 1. Introduction... 3 2. Test Environment... 3 2.1 Vetuma test environment...
More informationSERIES ASM NEOPRENE/EPMD FLANGED SINGLE SPHERE CONNECTOR CONNECTORS. Pressures to 225 PSIG (15.51 barg) Temperatures to 230ºF (110ºC)
APPLICATIONS Process Industry Weak Acids Alkalies Compressed Air Pulp & Paper MODELS ASM - Flanged Connection OPTIONS Control Rods Oil & Gas Water & Waste Pump suction & discharge Sea water Chemical lines
More informationManual piston sampler...m 11
SAMPLING Manual piston sampler...m 11 Screw sampler...prec 22...PREC 100 Slide sampler...pr 55 Rotative screw sampler...prv Piston sampler...p 11 Sampler on belt conveyor...pba Rotating cup sampler...pgr
More informationWorkshop Compressors CLASSIC Series
www.kaeser.com Workshop Compressors CLASSIC Series Displacement: 210 to 40 l/min Pressure: 10 bar What do you expect from your CLASSIC workshop compressor? Quality results can be achieved only by using
More informationAtling proudly presents the next generation self centering steady rests ATLING. Ockelbo Sweden. AX Steady Rests
Atling proudly presents the next generation self centering steady rests ATLING Ockelbo Sweden AX Steady Rests 1 The New AX Steady Rest The Atling AX series is the result of several years of development
More informationExperience In Motion. Valtek Spring Cylinder Linear Actuators
Experience In Motion Valtek Spring Cylinder Linear Actuators Valtek Spring Cylinder Linear Actuator Flowserve spring cylinder linear actuators are powerful, compact, high-performance pneumatic actuators
More informationRM/55401/M, Roundline cylinder Magnetic piston, double acting
RM/550/M, Roundline cylinder > > Ø... 00 mm > > Clean line design > > ow friction, long life seals > > Standard magnetic piston for full control system versatility Technical features Medium: Compressed
More informationRexroth Linear Motion Technology
2 Bosch Rexroth Corp. Linear Motion and Assembly Technologies Ball Rail Systems R310A 2202 (2007.05) Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Standard
More informationISO/VDMA Actuators. Engineering GREAT Solutions
ISO/VDMA Actuators Engineering GREAT Solutions 02 ISO/VDMA Actuators Contents 03 Introduction 04 ISO/VDMA Actuators 06 The ISO/VDMA Range 08 Industrial Options 10 Cleanline Options 12 IVAC innovation to
More informationDoc. No. NDP 015M-15 MAINTENANCE MANUAL YAMADA AIR-OPERATED DIAPHRAGM PUMPS. DP-10 series
Doc. No. NDP 015M-15 MAINTENANCE MANUAL YAMADA AIR-OPERATED DIAPHRAGM PUMPS DP-10 series WARNING For your own safety, be sure to read procedures carefully before performing maintenance on this product.
More informationFree piston Stirling engine for rural development
Free piston Stirling engine for rural development R. Krasensky, Intern, Stirling development, r.krasensky@rrenergy.nl W. Rijssenbeek, Managing director, w.rijssenbeek@rrenergy.nl Abstract: This paper presents
More informationT360 Barbecue. Assembly Manual. 85-3052-6 (G30531) Propane 1 YEAR LIMITED WARRANTY
T360 Barbecue Assembly Manual 85-3052-6 (G30531) Propane 1 YEAR LIMITED WARRANTY READ AND SAVE MANUAL FOR FUTURE REFERENCE. If pre-assembled, leave this manual with unit for consumer s future reference.
More information2200 Series End Drive Conveyors
00 Series End Drive Conveyors Installation, Maintenance & Parts Manual DORNER MFG. CORP. INSIDE THE USA OUTSIDE THE USA P.O. Box 0 975 Cottonwood Ave. TEL: -800-397-8664 TEL: 6-367-7600 Hartland, WI 5309-000
More informationCustom configuration such as modified angle dimensions, other flange standards, 3-way function, alternative materials.are available on request.
LEAKVALVE: HIGHLIGHTS The core of this valve is a diaphragm in stainless steel 316L, gold plated. Robust, it cannot be damaged with any normal methods. The dead volume is kept as small as possible. There
More informationHorns. Buzzers 6.02-6.03, 6.06. Compressed air horns 6.09-6.10. Disc-type horns 6.05-6.06. Electric twin-tone horns 6.08
Buzzers 6.02-6.03, 6.06 Compressed air horns 6.09-6.10 Disc-type horns 6.05-6.06 Electric twin-tone horns 6.08 6.03-6.04 Supertone horns 6.07 6 EE 07 6.01 Part no. Pk. Buzzers With bracket, Two 6.3 mm
More informationWOYR2.E67774 - Switches, Appliance and Special Use - Component. Switches, Appliance and Special Use - Component
Page 1 of 24 02..2014 WOYR2.E67774 Switches, Appliance and Special Use - Component For enhanced search functionality, please visit UL's iq Family of Databases. Click on a product designation for complete
More informationSERVER CERTIFICATES OF THE VETUMA SERVICE
Page 1 Version: 3.5, 4.11.2015 SERVER CERTIFICATES OF THE VETUMA SERVICE 1 (18) Page 2 Version: 3.5, 4.11.2015 Table of Contents 1. Introduction... 3 2. Test Environment... 3 2.1 Vetuma test environment...
More informationSMA Aluminum Cylinders
SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock /8,, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of the engineering
More informationRear Disc Kit. Front Caliper
Caliper and Wheel Kit 52-0600 1973-85 FX-FLH Chrome Rear Wheel/Brake Assembly includes chrome 16 x 3.0 Wheel Assembly, chrome caliper, chrome 51T sprocket with bolts, 10 or 11 1 /2 rear drill brake disc,
More informationPneumatic actuators The Original! Technics of the top class.
Automatic valves Actuators Accessories Pneumatic actuators The Original! Technics of the top class. Leaflet no. S1-01e-13 Table of contents Advantages and your benefits...page 3 Figure: actuator...page
More informationStudy on Design and Performance Prediction Methods for Miniaturized Stirling Engine
99SETC-42 Study on Design and Performance Prediction Methods for Miniaturized Stirling Engine Copyright 1998 Society of Automotive Engineers, Inc. Koichi HIRATA, Dr. Power and Energy Engineering Division,
More informationOriginal Line Cylinders
Original Line Original Line How to Order Introduction to Bimba Standard Air Three-Position Air with Adjustable Cushions MRS Non-Rotating Air PC Steel Non- Original Line Steel (Bell Ring Style) Original
More informationSTATE UNIVERSITY OF NEW YORK COLLEGE OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE AUTO 220 INTERNAL COMBUSTION ENGINES
STATE UNIVERSITY OF NEW YORK COLLEGE OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE AUTO 220 INTERNAL COMBUSTION ENGINES Prepared By: BRANDON BALDWIN CANINO SCHOOL OF ENGINEERING TECHNOLOGY AUTOMOTIVE TECHNOLOGY
More informationSPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB
SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB PRODUCT DESCRIPTION: BOON EDAM TOMSED MODEL TUT-65TMB STAINLESS STEEL BARCODE SCANNING ELECTRONIC REGISTERING TURNSTILE SCOPE OF OPERATION: A. The TUT-65TMB
More informationRadial piston pumps type R and RG
Radial piston pumps type R and RG Operating pressure p max = 700 bar Delivery flow Q max = 91.2 lpm (at 1450 rpm) Geometric displacement V g max = 64.2 cm 3 /rev. 1. General Motor pumps and hydraulic power
More informationAssisted lift operated 2/2-way solenoid valves Type EV250B
MAKING MODERN LIVING POSSIBLE Data sheet Assisted lift operated 2/2-way solenoid valves Type EV250B EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way
More informationFor New Technology Network. Steel Manufacturing Machinery Product Guide Book
For New Technology Network R Steel Manufacturing Machinery Product Guide Book Ecological / Economical proposals from NTN NTN products exhibit benefits at various locations. Steel manufacturing equipment
More information61W - Wafer style resilient seated butterfly valve 61L - Lugged style resilient seated butterfly valve
61W - Wafer style resilient seated butterfly valve 61L - Lugged style resilient seated butterfly valve Features Rounded polished disc edge gives full concentric sealing, lower torques, longer seat life
More informationConstruction (2) Characteristics (2) Rail Type (2) Carriage Type (3) Description of Specification (4) Accuracy Grade (5) Preload Grade (6)
Contents Construction (2) Characteristics (2) Rail Type (2) Carriage Type (3) Description of Specification (4) Accuracy Grade (5) Preload Grade (6) Dust Proof (7) Dimensions of Tapped-hole Rails (8) Rail
More informationNormcylinder 1.5002. Technical data. tension-rod cylinder. according DIN ISO 6431 VDMA 24562 DI/DIM DIM DIMB
Normcylinder Universal application through accomodating on DIN ISO 6431 and VDMA 24562 Part 1. Fastening elements according DIN ISO 6431, VDMA 24562 Part 2. Technical data Tension-rod-cylinder according
More informationJames M. Pleasants Company
James M. Pleasants Company SUBMITTAL DATA GAINESVILLE MECHANICAL DECEMBER 20, 2013 PROJECT: GSU: J-183 HUMANITIES LAW BLDG. QUOTE NO:12116 ENGINEER: STEVENS & WILKINSON GASKETED PLATE HEAT EXCHANGER Tag:
More informationmk Conveyor Technology
mk Conveyor Technology One construction kit many options Base Technology Profile Technology Conveyor Technology Factory Equipment Linear Motion Advantages of the mk modular system Everything comes from
More informationFuture Trends in Airline Pricing, Yield. March 13, 2013
Future Trends in Airline Pricing, Yield Management, &AncillaryFees March 13, 2013 THE OPPORTUNITY IS NOW FOR CORPORATE TRAVEL MANAGEMENT BUT FIRST: YOU HAVE TO KNOCK DOWN BARRIERS! but it won t hurt much!
More informationPUSH-PULL CABLES CONTROL SYSTEMS
ISO 9001 CERTIFIED PUSH-PULL CABLES CONTROL SYSTEMS WESCON PRODUCTS COMPANY A subsidiary of LATSHAW ENTERPRISES, INC. WESCON'S PUSH-PULL CONTROL SYSTEMS Push-Pull Cable Ends Wescon Push-Pull Cable Assemblies
More informationSTAR Linear Bushings and Shafts Supplement RE 83 117/2001-08. Linear Motion and Assembly Technologies
STAR Linear Bushings and Shafts Supplement RE 83 117/2001-08 Linear Motion and Assembly Technologies STAR Linear Motion Technology Ball Rail Systems Standard Ball Rail Systems Ball Rail Systems with Aluminum
More informationSOLENOID VALVES AND PNEUMATIC VALVES
2 A S E R I E S Catalogue 2005-2006 Directly operated solenoid valves Series A 2/2 way, 3/2 way monostable, bistable (with magnetic memory) Ports M5,, cartridge ø4 The Series A solenoid valves are of the
More informationDrive shaft, servicing
Volkswagen Passat B6 - Drive shaft, servicing Стр. 1 из 41 40-7 Drive shaft, servicing Drive shafts, overview I - Assembly overview: Drive axle with CV joint VL100 40-7, Drive axle with CV joint VL100,
More informationLinear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors
20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical
More informationFlash Butt Welding Machines
Flash Butt Welding Machines Types AS 15 - AS 320 Flash butt welding current brake current (ka) current time flattening reversal preheating welding time flash butting forging A reliable and economic process
More informationKELGATE BRAKES - price list for 2014 Page 1
KELGATE BRAKES - price list for 2014 Page 1 Description GBP (Kgms) Disc's:- FV = Fully Vented RV = Radially Vented New systems are supplied dry. 02-9028 Charge for bleeding per caliper 18.00 00-8080 GTK'
More informationTECHNICAL CHARACTERISTICS. Series K---- Codification key SERIES
Pneumatic cylinders mm according to ISO 643 and VDMA 56 with adjustable cushioning UNIVER pneumatic cylinders which comply with ISO 643 and VDMA 56 standards, take advantage of the improvements arising
More informationTechnical News Bulletin
Technical News Bulletin January 2003 Two-way air operated Funnel Mechanism 200-2100 Up-Stroke Cushion Control Valve Top-mounted Check Valve Increased Stroke Rigid Cam Cam Roller Fixation Page 1/5 1. Description
More informationHow To Drive A Compact Serie 1
Electric lifting cylinder Compact Series Table of Contents Glossary... 2 Compact serie SR 1... 4 Dimension SR 1... 5 Compact Serie SR 1SP... 6 Dimension SR 1SP... 7 Compact Serie SR 5... 8 Dimension SR
More informationPiston rod cylinders Standard cylinders ISO 15552, series PRA. Brochure
ISO 15552, series PRA Brochure 2 ISO 15552, series PRA Profile cylinder Ports: G 1/8 - G 1/2 double-acting with magnetic piston Cushioning: pneumatically, adjustable Piston rod: external thread ATEX optional
More informationPiston rod cylinder Standard cylinders ISO 15552, series TRB. Brochure
ISO 15552, series TRB Brochure 2 ISO 15552, series TRB Tie rod cylinder Ports: G 1/8 - G 1/2 double-acting with magnetic piston cushioning: pneumatically, adjustable Piston rod: external thread ATEX optional
More informationUltrasonic Reference Blocks
Ultrasonic Reference Blocks Custom and Standard Test Blocks for Nondestructive Testing Introduction 3 IIW Type 1 Calibration Block 4 Miniature Angle Beam (ROMPAS) Calibration Block 4 Distance Calibration
More informationOil Dampers with Fixings on. Both Ends. Damping Engineering Oil Dampers with Fixings on Both Ends. Technical Data
amping Engineering Oil ampers with Fixings on Both Ends Oil dampers with fixings on both ends are used when moving objects may not exceed a certain speed e.g. flaps, lids, lever arms. They are fixed at
More informationHYDRAULIC LIFT TABLE CART 2200-LB.
HYDRAULIC LIFT TABLE CART 2200-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other
More informationLINEAR MOTION CONTROL
LINEAR MOTION CONTROL Technical Data Sheet Static Locks RLSS Series Nexen s new generation of linear holding/locking devices take rod locking technology to the next level. With superior performance, these
More informationFisher 657 and 667 Diaphragm Actuators
657 and Actuators Product Bulletin Fisher 657 and Diaphragm Actuators Fisher 657 and spring-opposed diaphragm actuators position the valve plug in the valve in response to varying controller or valve positioner
More informationMP-4V Heavy Duty Riveter / 39048
MP-4V Heavy Duty Riveter / 39048 This newly designed heavy-duty air/hydraulic riveter is ergonomically designed with the professional in mind. The light weight 3.7 lbs. well balanced MP-4V includes a Vacuum
More information