Summer 2013 Templates Set Part 1

Transcription

1 Pie Charts Template Sheet Size for 6x6 size cards Size for A6, (4x6 ) size cards Size for landscape A6, (6x4 ) size cards

2 Pie Charts Sample Card To make this card first print out the template sheet on regular paper. Pick out a piece of white card to fit over the top of the smallest pie chart templates on the sheet, the middle row. Add a small amount of glue stick to the back of the card and glue it over the top of the template temporarily. Put the sheet back in your printer and print again so it prints over the top of the piece of card. Carefully peel the card piece from the template sheet. Next pick out some patterned paper pieces with small patterns on or use plain coloured papers. In turn temporarily glue the paper pieces over the pie chart templates and print the sheet again so it prints out the template on the different paper pieces you ve picked out. When you have several of the shapes printed out on different papers cut up some of the wedges that make up the pie charts and glue them onto the white card print out. Keep going until all the edges are filled with different patterns. Cut out the card piece neatly so it s ready to fit across the middle of your card. Decorate a A6 size (4x6 inches) card by covering the whole front with a piece of patterned paper. Add the pie chart embellishment along the bottom edge of the card then add the 100% above it using alphabet stickers and the perfect underneath the embellishment.. Have fun making your card!

3 Faux Washi Tape Template Sheet Different sizes to suit your choice of project

4 Faux Washi Tape Sample Card To make this card first print out the template sheet onto regular paper. Pick out four different patterned papers and cut out strips of them to fit over the largest of the washi tape templates on the sheet. Use glue stick to temporarily glue them to the sheet over the top of the templates then put the sheet back in your printer and print the same sheet again, (page 3) so it prints over the top of the paper pieces. Carefully peel the papers from the sheet and cut out along the printed lines to create your faux washi tape pieces. To create the sample card first cover your card blank with a lined note paper then pick out other stationary themed bits and pieces, (tags stickers etc) to layer along the edges of your card. Glue the washi tape pieces to a large tag then add the message on top. Glue the tag to your card to finish. Have fun making your card!

5 Bird Silhouette Template Sheet Different sizes to suit your choice of project

6 Bird Silhouette Sample Card To make this card first print out the template sheet onto regular paper. Pick out two patterned papers, one for the bird you want to use and one for the flower if using. You could also if you wanted to use the same colour or pattern for both pieces. Glue the papers over the top of the larger humming bird template design on the sheet using small dabs of glue stick to temporarily glue the paper pieces to the sheet. Put the sheet back inside your printer and print the same page again, (page 5) so it prints over the top of the paper pieces. Carefully peel the paper off the sheet and cut out the designs. To create the card pick out an A6 size card blank, (4x6 inches) or make one from folded cardstock. Pick out three or four different patterned papers that layer nicely together and layer them up onto your card using torn edges on some of the layers to create interest, sort of like a scrapbook or notebook. Add your cut out bird and flower shapes on top then finish your card with your choice of message across the top. Have fun making your card!

7 Scooter Doodle Template Sheet A selection of different sizes to choose from to suit your choice of project.

8 Scooter Doodle Sample Card To make this card first print out the template sheet onto regular paper. Pick out a piece of white cardstock and cut it to fit over the top of the smallest scooter design on the template sheet. Place a small amount of glue stick on the back of the cardstock and fix it to the sheet. Put the sheet back inside your printer and print the same sheet again, (page 7) so it prints over the top of the piece of card. Carefully peel it off the paper sheet and put it to one side to dry. Next pick out a patterned paper with a small scale repeat pattern on it. Use glue stick again to temporarily glue it over the top of the same scooter design on the template sheet and repeat printing the sheet again so this time it prints over the top of the patterned paper. Peel the paper off the sheet and cut out the seat cushion on the design. Glue this piece to the design you printed on the white card earlier. Colour in the rest of the scooter with marker pens or if you wanted to you could use more patterned paper to decorate all the other parts of the scooter. To create the card first take a A6 size card blank, (or 4x6 inches) and layer a piece of patterned paper over the whole front of the card. Pick a piece of ribbon and add it across the bottom edge, about an inch from the bottom of the card. Add the scooter embellishment on top of the ribbon. Finish your card by adding the message to the top area of the card. Have fun making your card!

9 Handbag Doodle Template Sheet A selection of different sizes to choose from to suit your choice of project.

10 Handbag Doodle Sample Card To make this card first print out the template sheet onto regular paper. Cut out a piece of white cardstock in a rectangle shape to fit over the top of the middle sized template in the bottom left corner of the template sheet. Use glue stick to temporarily glue the card piece to the template sheet and put the sheet back inside your printer then print the same sheet again, (page 9) so it prints over the top of the piece of card. Carefully peel the card piece from the template sheet and put it to one side. Pick out a patterned paper next and repeat the same process of printing the paper on the patterned paper piece then once it s printed out cut out the bag shape. Repeat this process with another piece of white or plain card to colour in for the bag handle and heart shapes on the front of the bags. Cut out and glue the handle, hearts and patterned bag shapes over the top of the white card rectangle then add your message stamped underneath to create your embellishment. To create your card, layer a piece of patterned paper over the front of an A6 card blank. Cut a second piece of patterned paper just slightly larger than your embellishment panel to make a matt then glue the whole thing to your card to finish. Have fun making your card!

11 Bows Template Sheet Different sizes to choose from. Use all three different bows on one card or use each different design individually.

12 Bows Sample Card To make this card first print out the template sheet directly onto white cardstock. Colour in the smaller bows on the sheet with marker pens. Cut out the three bows and pick out a message stamp, (or use small alphabet stickers) in three sections to accompany the three bows. Decorate the front of an A6 card blank, (or make one 4x6 inches) with a piece of patterned paper the colour of the bows. Cut out another rectangle of patterned paper to about 2 1/4 x 4 1/4 inches and glue it in the centre of your card. Glue the cut out bows down the middle of the paper and add each section of the message to each of the bows to finish the card. Have fun making your card!

13 Travel Icon Doodles Template Sheet

14 Travel Icon Doodles Sample Card To make this card first print out the template sheet directly onto white cardstock. Colour in the smaller images on the sheet with marker pens. Cut them out leaving them with a small border of white around the edges. Colour all around the edge of the happy travels heart piece then cut out around the edges of your colouring. Take an A6 card blank, (4x6 inches) and cover the front with a piece of patterned paper. Pick out two more coordinating patterned papers and cut out rectangle shaped pieces of them, one slightly smaller than the other. Layer the two pieces of paper up and glue them to the middle of your card. Take the happy travels piece and cut up along the pointed bottom edge of the heart then tuck it over the top of the world image like a paper clip. Add the geo tag shape next so it s over lapping the edge of the world image then glue the whole thing to your card in the centre. Finish the card by adding the arrow underneath. Have fun making your card!

15 Lager Glass Messages Template Sheet

16 Lager Glass Messages Sample Card To make this card first print out the template sheet directly onto white cardstock. Cut out the design with the For You across the middle in a rectangle shape keeping close to the edge. Colour in the image in with marker pens. To make the lager colour in the sample card two colours of Promarkers have been layered together, a layer of Amber then a layer of Apricot keeping it slightly lighter in places to give it a two tone effect. The glass parts were coloured with Vanilla and a little Cool Grey. Once your whole image is coloured draw around the edge with a doodled border using a black pen. To put the card together pick out three coordinating patterned papers. Cover the whole of the front of your card with one of the papers then cut out a rectangle of another of the papers a half inch smaller than the background the whole way around and glue it down centrally on your card. With the final patterned paper glue your glass embellishment panel to it then trim the edges leaving a small border of the pattern around the edge. Stamp your message on another piece of paper and layer it so it s tucked underneath your embellishment panel then stick this down onto your card to finish. Have fun making your card!

17 Beer Bottle Messages Template Sheet A selection of different sizes to choose from to suit your choice of project.

18 Beer Bottle Messages Sample Card To make this card first print out the template sheet directly onto white cardstock. Cut out the design with the For You Dad across the middle in a rectangle shape keeping close to the edge. Colour in the image with marker pens. Once your whole image is coloured draw around the edge with a doodled border using a black pen. To put the card together pick out two coordinating patterned papers and a couple of patterned tags. Cover the whole of the front of your card with one of the papers then cut out a smaller rectangle of the other paper a half inch smaller than the background the whole way around and glue it down centrally on your card. Layer up the patterned tags along the right side of your card then glue them down. Add your embellishment on top so it s over the top of the tags and to the right side of your card. If you don t have patterned tags to use just use smaller pieces of patterned paper. It s a great way to use up smaller off cut pieces just layering them up in your card background. Have fun making your card!

19 A selection of different sizes to choose from to suit your choice of project. Light Love Template Sheet

20 Light Love Sample Card To make this card first print out the template sheet directly onto white cardstock. Colour in the design in the bottom left corner of the template sheet. Colour the bulb in a bright yellow and the heart shaped filament in a pink or red. When it s coloured cut it out leaving a border of white around the edge. Cut out a panel of plain coloured cardstock to 3x5 inches. Glue your light bulb embellishment to the top half of this piece of card and add the message with stickers or stamps underneath it. To decorate your card take a A6 size card blank, (4x6 inches) and cover the whole of the front in a simple patterned paper. Add your embellished panel to the front of the card to finish. Have fun making your card!