Aluminum Electrolytic Capacitors SMD (Chip) Long Life Vertical
|
|
- Rosanna Lloyd
- 7 years ago
- Views:
Transcription
1 Aluminum Electrolytic Capacitors SMD (Chip) Long Life Vertical FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing SMD-version with base plate, vertical construction requiring minimum board space, lead (Pb)-free reflow solderable High CV per unit volume Long useful life: 000 h to 3000 h at 05 C Charge and discharge proof, no peak current limitation 75 TMP 75 C solid SMD 40 CRH 5 C High temp. Supplied in blister tape on reel ATTENTION: for maximum safe soldering conditions refer to Fig. 4 Material categorization: for definitions of compliance please see Low Z APPLICATIONS SMD technology, in compliance with RoHS 50 CRZ Coupling, decoupling, smoothing, filtering, buffering, timing Fig. Telecommunications, general industrial, EDP, automotive, portable and lightweight equipment QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes 4.0 x 4.0 x 5.3 (L x W x H in mm) to 0 x 0 x 4 Rated capacitance range, C R 0.47 μf to 000 μf Tolerance on C R ± 0 % Rated voltage range, U R 6.3 V to 00 V Category temperature range -55 C to +05 C Endurance test at 05 C: 4.0 x 4.0 x 5.3 to 6.3 x 6.3 x h 8.0 x 8.0 x 6.5 to 0 x 0 x h Useful life at 05 C: 4.0 x 4.0 x 5.3 to 6.3 x 6.3 x h 8.0 x 8.0 x 6.5 to 0 x 0 x h Useful life at 40 C;.3 x l R applied: 4.0 x 4.0 x 5.3 to 6.3 x 6.3 x h 8.0 x 8.0 x 6.5 to 0 x 0 x h Shelf life at 0 V, 05 C 000 h Based on sectional specification IEC / CECC 3300 Climatic category IEC / 05 / 56 MARKING Rated capacitance (in μf) Rated voltage (in V) Date code Black mark or - sign indicating the cathode (the anode is identified by bevelled edges) PACKAGING Supplied in blister tape on reel Revision: 5-Jul-6 Document Number: 8388
2 SELECTION CHART FOR C R, U R, AND RELEVANT NOMINAL CASE SIZES (L x W x H in mm) C R U R (V) (μf) x 4.0 x x 4.0 x x 4.0 x x 4.0 x x 4.0 x x 5.0 x x 4.0 x x 5.0 x x 6.3 x x 4.0 x x 5.0 x x 6.3 x x 8.0 x x 5.0 x x 6.3 x x 8.0 x x 8.0 x 0-0 x 0 x x 5.0 x x 6.3 x x 8.0 x x 8.0 x x 6.3 x x 8.0 x x 8.0 x 0-0 x 0 x 0 0 x 0 x x 8.0 x 0 0 x 0 x x 8.0 x 0 0 x 0 x 0-0 x 0 x x 0 x 0-0 x 0 x x 0 x x 0 x Table TAPE AND REEL DIMENSIONS in millimeters AND PACKAGING QUANTITIES CASE CODE PITCH P Note Detailed tape dimensions see section PACKAGING. TAPE WIDTH W TAPE THICKNESS T REEL DIAMETER PACKAGING QUANTITY PER REEL Revision: 5-Jul-6 Document Number: 8388
3 0.4 ± 0. L D W B H S 0.3 max. Fig. - Dimensional outline Table DIMENSIONS in millimeters AND MASS NOMINAL CASE SIZE MASS CASE CODE L L x W x H max. W max. H max. Ø D B max. S (g) 4.0 x 4.0 x x 5.0 x x 6.3 x x 8.0 x x 8.0 x x 0 x x 0 x MOUNTING The capacitors are designed for automatic placement on to printed-circuit boards. Optimum dimensions of soldering pads depend amongst others on soldering method, mounting accuracy, print layout and / or adjacent components. For recommended soldering pad dimensions, refer to Fig. 3 and Table 3. SOLDERING Soldering conditions are defined by the curve, temperature versus time, where the temperature is that measured on the soldering pad and on top of the case during processing. For maximum conditions refer to Fig. 4. Maximum runs with pause of minimum 30 min between. Any temperature versus time curve which does not exceed the specified maximum curves may be applied. AS A GENERAL PRINCIPLE, TEMPERATURE AND DURATION SHALL BE THE MINIMUM NECESSARY REQUIRED TO ENSURE GOOD SOLDERING CONNECTIONS. HOWEVER, THE SPECIFIED MAXIMUM CURVES SHOULD NEVER BE EXCEEDED. b a c a Fig. 3 - Recommended soldering pad dimensions Table 3 RECOMMENDED SOLDERING PAD DIMENSIONS in millimeters CASE CODE a b c Revision: 5-Jul-6 3 Document Number: 8388
4 T ( C) T Peak t 4 t 3 50 t t time (s) Fig. 4 - Maximum temperature load during reflow soldering measured on capacitors soldering pad and top of the case REFLOW SOLDERING CONDITIONS PROFILE FEATURES CASE CODE 0405 TO 0605 CASE CODE 0807 TO 00 CASE CODE V CASE CODE V Max. time from 5 C to T peak 40 s 40 s 300 s 70 s Max. ramp-up rate to 50 C 3 K/s 3 K/s 3 K/s 3 K/s Max. time from 50 C to 00 C (t ) 0 s 0 s 50 s 0 s Ramp up rate from 00 C to T peak 0.5 K/s to 3 K/s 0.5 K/s to 3 K/s 0.5 K/s to 3 K/s 0.5 K/s to 3 K/s Max. time from 00 C to 7 C, (t ) 0 s 0 s 60 s 60 s Max. time above T Liquidus (7 C), (t 3 ) 60 s 60 s 90 s 60 s Max. time above 30 C (t 4 ) 30 s 0 s 40 s 30 s Peak temperature T peak 50 C 40 C 50 C 40 C Max. time above T peak minus 5 C 5 s 5 s 5 s 0 s Max. ramp-down rate from T Liquidus 6 K/s 6 K/s 6 K/s 6 K/s Note Temperature measuring point on top of the case and terminals max. runs with pause of 30 min in between Revision: 5-Jul-6 4 Document Number: 8388
5 ELECTRICAL DATA SYMBOL DESCRIPTION C R Rated capacitance at 00 Hz or 0 Hz, tolerance ± 0 % I R Rated RMS ripple current at 00 Hz or 0 Hz, 05 C I L Max. leakage current after min at U R tan Max. dissipation factor at 00 Hz or 0 Hz ESR Equivalent series resistance at 00 khz ORDERING EXAMPLE Electrolytic capacitor series 00 μf / 5 V; ± 0 % Nominal case size: 8 mm x 8 mm x 0 mm; taped on reel Ordering code: MAL53760E3 Former NC: Note Unless otherwise specified, all electrical values in Table 4 apply at T amb = 0 C, P = 86 kpa to 06 kpa, RH = 45 % to 75 %. Table 4 ELECTRICAL DATA AND ORDERING INFORMATION U R (V) C R (μf) NOMINAL CASE SIZE L x W x H (mm) I R 05 C (ma) I L min (μa) tan 00 Hz ESR 00 khz () ORDERING CODE MAL x 4.0 x E x 5.0 x E x 6.3 x E x 8.0 x E x 0 x E x 0 x E x 5.0 x E x 8.0 x E x 0 x E x 0 x E x 4.0 x E3 5.0 x 5.0 x E x 6.3 x E x 8.0 x E3 0 0 x 0 x E x 0 x E x 6.3 x E x 8.0 x E x 8.0 x E x 0 x E x 4.0 x E x 5.0 x E3 6.3 x 6.3 x E x 8.0 x E x 4.0 x E x 4.0 x E x 4.0 x E x 4.0 x E x 5.0 x E x 6.3 x E3 8.0 x 8.0 x E x 8.0 x E x 8.0 x E x 0 x E x 0 x E x 0 x E3 Revision: 5-Jul-6 5 Document Number: 8388
6 ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE Voltage Surge voltage IEC , subclause 4.4 U s.5 x U R Reverse voltage IEC , subclause 4.6 U rev V Current Leakage current After min at U R I L 0.0 x C R x U R or 3 μa, whichever is greater Inductance Equivalent series inductance (ESL) Case codes 0405 to 0605 Case codes 0807 to 04 Typ. 0 nh Typ. 5 nh CAPACITANCE (C). C C 0.0 EQUIVALENT SERIES RESISTANCE (ESR) 0 ESR (Ω) Curve : µf, 50 V Curve : 00 µf, 6.3 V Curve : μf, 6.3 V Curve : μf, 6 V Curve 3: μf, 5 V C T amb ( C) 0 = Capacitance at 0 C Fig. 5 - Typical multiplier of capacitance at 00 Hz or 0 Hz as a function of ambient temperature f (khz) Fig. 6 - Typical ESR as a function of frequency at 0 C DISSIPATION FACTOR (tan ) IMPEDANCE (Z) 0 tan δ Curve : µf, 50 V Curve : 00 µf, 6.3 V 0 Z (Ω) Curve : µf, 6.3 V Curve : µf, 6 V Curve 3: µf, 5 V T amb ( C) f (khz) Fig. 7 - Typical dissipation factor (tan ) at 00 Hz or 0 Hz as a function of ambient temperature Fig. 8 - Typical impedance as a function of frequency at 0 C Revision: 5-Jul-6 6 Document Number: 8388
7 RIPPLE CURRENT AND USEFUL LIFE 3.8 CCC06 I A I R lifetime multiplier I A = Actual ripple current at 00 Hz or 0 Hz I R = Rated ripple current at 00 Hz or 0 Hz at 05 C For case codes 0405 to 00 max. I A /I R =.4 () Useful life at 05 C and I R applied: Case codes 0405 to 0605: 000 h Case codes 0807 to 04: 3000 h () T amb ( C) Fig. 9 - Multiplier of useful life as a function of ambient temperature and ripple current load Table 5 MULTIPLIER OF RIPPLE CURRENT (I R ) AS A FUNCTION OF FREQUENCY FREQUENCY I R MULTIPLIER (Hz) U R = 6.3 V TO 6 V U R = 5 V OR 35 V U R = 50 V TO 00 V 50 or or Revision: 5-Jul-6 7 Document Number: 8388
8 Table 6 TEST PROCEDURES AND REQUIREMENTS NAME OF TEST Mounting Endurance Useful life Shelf life (storage at high temperature) TEST REFERENCE IEC , subclause 4.3 IEC / CECC 3300, subclause 4.5 CECC 3030, subclause.8. IEC / CECC 3 300, subclause 4.7 PROCEDURE (quick reference) Shall be performed prior to tests mentioned below; reflow soldering; for maximum temperature load refer to chapter Mounting T amb = 05 C; U R applied; 000 h, case codes 0405 to h, case codes 0807 to 04 T amb = 05 C; U R and I R applied; 000 h, case codes 0405 to h, case codes 0807 to 04 T amb = 05 C; no voltage applied; 000 h After test: U R to be applied for 30 min, 4 h to 48 h before measurement REQUIREMENTS C/C: ± 0 % tan spec. limit I L spec. limit C/C: ± 0 % tan x spec. limit I L spec. limit C/C: ± 50 % tan 3 x spec. limit I L spec. limit no short or open circuit total failure percentage: % For requirements see Endurance test above Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability. Revision: 5-Jul-6 8 Document Number: 8388
9 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Revision: 3-Jun-6 Document Number: 9000
Aluminum Electrolytic Capacitors Radial Miniature, Low Impedance, High Vibration Capability
Aluminum Electrolytic Capacitors Radial Miniature, Low Impedance, High Vibration Capability 048 RML 48 RUS lower longer life 36 RVI miniaturize 50 RMI high vibration FEATURES Very long useful life: 7000
More informationAluminum Electrolytic Capacitors Axial Miniature, Long-Life
Aluminum Electrolytic Capacitors Axial Miniature, Long-Life 38 AML 0 ASM smaller dimensions Fig. QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (Ø D x L in mm) 6.3 x.7 to 0 x 5 VALUE 0 x 30 to x 38
More informationhandbook, 2 columns handbook, halfpage 085 CS
FEATURES Polarized aluminium electrolytic capacitors, non-solid, self healing Extended voltage and capacitance range SMD-version, fully moulded, insulated Flexible terminals, reflow and wave solderable
More informationAluminum Electrolytic Capacitors Power Eurodin Printed Wiring
Aluminum Electrolytic Capacitors Power Eurodin Printed Wiring 00/0 PEDPW Fig. QUICK REFERENCE DATA DESCRIPTION VALUE 00 0 Nominal case size (Ø D x L in mm) x 0 to 0 x 00 Rated capacitance range 0 μf to
More informationAluminum Electrolytic Capacitors Power Economic Printed Wiring
Aluminum Electrolytic Capacitors Power Economic Printed Wiring 0/0 PECPW 00/0 PEDPW Fig. QUICK REFERENCE DATA DESCRIPTION high ripple current 0/0 PECPW long life 0 C Nominal case size (Ø D x L in mm) Rated
More informationAluminum Capacitors Solid Axial
SAL-A End of Life. Last Available Purchase Date is -December- Radial higher CV/volume Fig. QUICK REFERENCE DATA DESCRIPTION VALUE Maximum case size (Ø D x L in mm) 6.7 x. to.9 x. Rated capacitance range
More informationSMD Aluminum Solid Capacitors with Conductive Polymer
SMD Aluminum Solid Capacitors with Conductive Polymer FEATURES New OS-CON series provides improved characteristics with up to 25 C temperature capability and 35 V maximum voltage rating in a SMD package
More informationElectrical Double Layer Energy Storage Capacitors Power and Energy Versions
Electrical Double Layer Energy Storage Capacitors Power and Energy Versions FEATURES Polarized energy storage capacitor with high capacity and energy density Energy version with high stability available
More informationSmall Signal Fast Switching Diode
Small Signal Fast Switching Diode MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box 08/K per 7" reel (8 mm tape), K/box FEATURES Silicon epitaxial
More informationSurface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications
Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications ELECTRICAL SPECIFICATIONS X7R GENERAL SPECIFICATION Note Electrical characteristics at +25 C unless otherwise specified
More informationSuperTan Extended (STE) Capacitors, Wet Tantalum Capacitors with Hermetic Seal
SuperTan Extended () Capacitors, Wet Tantalum Capacitors with Hermetic Seal FEATURES SuperTan Extended () represents a major breakthrough in wet tantalum capacitor Available technology. Its unique cathode
More informationHigh Speed Infrared Emitting Diode, 940 nm, GaAlAs, MQW
High Speed Infrared Emitting Diode, 940 nm, GaAlAs, MQW DESCRIPTION is an infrared, 940 nm side looking emitting diode in GaAlAs multi quantum well (MQW) technology with high radiant power and high speed,
More informationSmall Signal Fast Switching Diode FEATURES PART ORDERING CODE INTERNAL CONSTRUCTION TYPE MARKING REMARKS
Small Signal Fast Switching Diode MARKING (example only) Bar = cathode marking XY = type code X Y 6 MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box
More informationHigh Performance Schottky Rectifier, 3.0 A
High Performance Schottky Rectifier, 3. A Cathode Anode SMC PRODUCT SUMMARY Package SMC I F(AV) 3. A V R 4 V V F at I F.46 V I RM 3 ma at 25 C T J max. 5 C Diode variation Single die E AS 6. mj FEATURES
More informationSilicon PIN Photodiode
VEMD940F Silicon PIN Photodiode DESCRIPTION VEMD940F is a high speed and high sensitive PIN photodiode in a miniature side looking, surface mount package (SMD) with daylight blocking filter. Filter is
More informationAC and Pulse Film Foil Capacitors KP Radial Potted Type
AC and Pulse Film Foil Capacitors KP Radial Potted Type 0.5 L max. W max. Marking H max. FEATURES 5 mm lead pitch, supplied loose in box taped in ammopack or reel Material categorization: for definitions
More informationHigh Performance Schottky Rectifier, 1.0 A
High Performance Schottky Rectifier, 1. A VS-BQ3-M3 Cathode Anode SMB PRODUCT SUMMARY Package SMB I F(AV) 1. A V R 3 V V F at I F.42 V I RM max. 15 ma at 125 C T J max. 15 C Diode variation Single die
More informationPulse Proof Thick Film Chip Resistors
Pulse Proof Thick Film Chip Resistors FEATURES High pulse performance, up to kw Stability R/R 1 % for h at 70 C AEC-Q200 qualified Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
More information50 W Power Resistor, Thick Film Technology, TO-220
50 W Power Resistor, Thick Film Technology, TO-220 FEATURES 50 W at 25 C heatsink mounted Adjusted by sand trimming Leaded or surface mount versions High power to size ratio Non inductive element Material
More informationSchottky Rectifier, 1.0 A
Schottky Rectifier, 1.0 A VS-BQ040-M3 Cathode Anode PRODUCT SUMMARY Package SMB I F(AV) 1.0 A V R 40 V V F at I F 0.38 V I RM 9 ma at 125 C T J max. 150 C Diode variation Single die E AS 3.0 mj FEATURES
More informationHigh Performance Schottky Rectifier, 1 A
High Performance Schottky Rectifier, A VS-MQNPbF Cathode Anode DO-24AC (SMA) PRODUCT SUMMARY Package DO-24AC (SMA) I F(AV) A V R V V F at I F.78 V I RM ma at 25 C T J max. 5 C Diode variation Single die
More informationOptocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package
ILD25T, ILD26T, ILD27T, ILD211T, ILD213T Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package i17925 A1 C2 A3 C4 i17918-2 8C 7E 6C 5E DESCRIPTION The ILD25T, ILD26T, ILD27T, ILD211T, and ILD213T
More informationAC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC / Class Y1, 500 V AC
4L Series AC Line Rated Ceramic Disc Capacitors Class X, 76 V AC / Class Y, 5 V AC FEATURES Complies with IEC 6384-4, 4 th edition High reliability Radial leads High capacitance up to nf Singlelayer AC
More informationKnob Potentiometer with Switch
Knob Potentiometer with Switch The is a revolutionary concept in panel mounted potentiometers. This unique design consists of a knob driving and incorporating a cermet potentiometer. Only the mounting
More informationUV SMD LED PLCC-2 FEATURES APPLICATIONS. at I F (ma) (ma) MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX.
UV SMD LED PLCC-2 VLMU31 19225 DESCRIPTION The package of the VLMU31-series is the PLCC-2. It consists of a lead frame which is embedded in a white thermoplast. The reflector inside this package is filled
More informationLow Current SMD LED PLCC-2
Low Current SMD LED PLCC-2 VLMC31. 19225 DESCRIPTION These new devices have been designed to meet the increasing demand for low current SMD LEDs. The package of the VLMC31. is the PLCC-2 (equivalent to
More informationKnob Potentiometer FEATURES. P16NP P16NM Panel Cutout. Thickness nut 2 mm washer 1.5 mm. Panel sealing ring 12 wrench Thread M10 x 0.75 10.2 9.
Knob Potentiometer P6, PA6 FEATURES Test according to CECC 4000 or IEC 60393- P6 - Version for professional and industrial applications (cermet) W at 40 C PA6 - Version for professional audio applications
More informationSchottky Rectifier, 1.0 A
Schottky Rectifier, 1.0 A VS-BQ060PbF Vishay High Power Products FEATURES Small foot print, surface mountable Low forward voltage drop SMB Cathode Anode High frequency operation Guard ring for enhanced
More information1 Form A Solid State Relay
Form A Solid State Relay VOAT, VOAABTR FEATURES 9 S S DC S' 3 S' High speed SSR - t on /t off < 8 μs Maximum R ON. Isolation test voltage 3 V RMS Load voltage V Load current A DC configuration DIP- package
More informationOptocoupler, Phototransistor Output, with Base Connection
4N25, 4N26, 4N27, 4N28 Optocoupler, Phototransistor Output, FEATURES A 6 B Isolation test voltage 5000 V RMS Interfaces with common logic families C 2 5 C Input-output coupling capacitance < pf NC 3 4
More informationOptocoupler, Phototransistor Output, with Base Connection, 300 V BV CEO
SFH64 Optocoupler, Phototransistor Output, with Base Connection, 3 V BV CEO i1794-3 DESCRIPTION The SFH64 is an optocoupler with very high BV CER, a minimum of 3 V. It is intended for telecommunications
More informationReflective Optical Sensor with Transistor Output
TCRT5000, TCRT5000L Reflective Optical Sensor with Transistor Output FEATURES Package type: leaded Detector type: phototransistor Dimensions (L x W x H in mm): 10.2 x 5.8 x 7 Peak operating distance: 2.5
More informationOptocoupler, Phototransistor Output, AC Input
Optocoupler, Phototransistor Output, AC Input DESCRIPTION The SFH62A (DIP) and SFH626 (SMD) feature a high current transfer ratio, low coupling capacitance and high isolation voltage. These couplers have
More informationP6KE6.8A thru P6KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. www.vishay.com FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 540 V V BR bi-directional 6.8 V to 440 V P PPM 600 W P D 5.0 W I FSM (uni-directional
More informationPower Resistor Thick Film Technology
Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages. FEATURES
More informationOptocoupler, Phototransistor Output, with Base Connection
Optocoupler, Phototransistor Output, with Base Connection FEATURES i794-4 DESCRIPTION This datasheet presents five families of Vishay industry standard single channel phototransistor couplers. These families
More informationStandard Thick Film Chip Resistors
Standard Thick Film Chip Resistors FEATURES Stability R/R = 1 % for 00 h at 70 C 2 mm pitch packaging option for size Pure tin solder contacts on Ni barrier layer provides compatibility with lead (Pb)-free
More informationSMD PTC - Nickel Thin Film Linear Thermistors
SMD PTC - Nickel Thin Film Linear Thermistors Notes (1) Contact if closer TCR lot tolerance is desired. (2) Other R 25 -values and tolerances are available upon request. (3) Rated continuous working voltage
More informationAluminum Capacitors Radial Style
Component outlines Obsolete - please refer to: www.vishay.com/doc?25013 FEATURES Polarized Aluminum electrolytic capacitor High C x U product Small dimensions Long lifetime Extended temperature range:
More informationPulse Proof, High Power Thick Film Chip Resistors
Pulse Proof, High Power Thick Film Chip Resistors STANDARD ELTRICAL SPIFICATIONS MODEL CASE SIZE INCH CASE SIZE METRIC POWER RATING P 70 W LIMITING ELEMENT VOLTAGE U max. AC/DC -HP e3 FTURES Excellent
More informationReflective Optical Sensor with Transistor Output
www.vishay.com TCRT, TCRT Reflective Optical Sensor with Transistor Output 2836 TCRT A C E C TCRT 955_ FEATURES Package type: leaded Detector type: phototransistor Dimensions (L x W x H in mm): 7 x 4 x
More informationSilicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION 94 8632 is a PIN photodiode with high speed and high radiant sensitivity in a clear, side view plastic package. It is sensitive to visible and near infrared radiation.
More information1 Form A Solid State Relay
1 Form A Solid State Relay Vishay Semiconductors DIP i1791- SMD DESCRIPTION Vishay solid state relays (SSRs) are miniature, optically coupled relays with high-voltage MOSFET outputs. The LH1518 relays
More informationSilicon NPN Phototransistor
Silicon NPN Phototransistor 16758-1 VEMT252X1 DESCRIPTION VEMT25X1 VEMT25X1 series are silicon NPN epitaxial planar phototransistors in a miniature dome lens, clear epoxy package for surface mounting.
More informationPhotovoltaic MOSFET Driver with Integrated Fast Turn-Off, Solid-State Relay
Photovoltaic MOSFET Driver with Integrated Fast Turn-Off, Solid-State Relay i7966_6 Turn Off FEATURES Open circuit voltage at I F = ma, 8. V typical Short circuit current at I F = ma, 5 μa typical Isolation
More informationSilicon NPN Phototransistor
Silicon NPN Phototransistor DESCRIPTION 7 is a silicon NPN phototransistor with high radiant sensitivity in black, T-1¾ plastic package with base terminal and daylight blocking filter. Filter bandwidth
More informationOptocoupler, Phototransistor Output, 4 Pin LSOP, Long Creepage Mini-Flat Package
Optocoupler, Phototransistor Output, 4 Pin LSOP, Long Creepage Mini-Flat Package FEATURES A 4 C Low profile package High collector emitter voltage, V CEO = 8 V 7295-6 DESCRIPTION The has a GaAs infrared
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES 800 W at 85 C bottom case temperature Wide resistance range: 0.3 to 900 k E24 series Non inductive Easy
More informationPreamplifier Circuit for IR Remote Control
Preamplifier Circuit for IR Remote Control 22906 FEATURES Carrier-out-function: carrier frequency and burst length accurately correspond to the input signal AC coupled response from 20 khz to 60 khz; all
More informationPrecision Surface Mount Resistors Wirewound or Metal Film Technologies
Precision Surface Mount Resists irewound Metal Film Technologies FEATURES Accding to CECC 40402-801 (wirewound) ide range of ohmic values (0.04 to 1 M) Low temperature coefficient (± 25 ppm/ C available)
More informationSilicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION 94 8583 BPW34 is a PIN photodiode with high speed and high radiant sensitivity in miniature, flat, top view, clear plastic package. It is sensitive to visible and near
More informationSchottky Rectifier, 100 A
Schottky Rectifier, A VS-BGQ Cathode Anode PowerTab PRODUCT SUMMARY Package PowerTab I F(AV) A V R V V F at I F 0.82 V I RM 180 ma at 125 C T J max. 175 C Diode variation Single die E AS 9 mj FEATURES
More informationSolid Tantalum Surface Mount Capacitors TANTAMOUNT, Molded Case, Low ESR
Solid Tantalum Surface Mount Capacitors TANTAMOUNT, Molded Case, Low ESR Effective September 2005, new capacitor ratings will not be added to the series. All new ratings are available in the TR3 series.
More informationAC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC QUICK REFERENCE DATA DESCRIPTION VALUE Ceramic Class 1 2 Ceramic Dielectric U2J U2J Y5S, Y5U Y5S, Y5U Voltage (V AC ) 500 760
More informationHigh Power Infrared Emitting Diode, 940 nm, GaAlAs, MQW
High Power Infrared Emitting Diode, 94 nm, GaAlAs, MQW DESCRIPTION 94 8389 is an infrared, 94 nm emitting diode in GaAlAs multi quantum well (MQW) technology with high radiant power and high speed molded
More informationAmbient Light Sensor
TEPT56 Ambient Light Sensor DESCRIPTION 94 839 TEPT56 ambient light sensor is a silicon NPN epitaxial planar phototransistor in a T-1¾ package. It is sensitive to visible light much like the human eye
More informationMetal Film Resistors, Industrial, Flameproof
End of Life - August 13 Metal Film Resistors, Industrial, Flameproof STANDARD ELECTRICAL SPECIFICATIONS FEATURES Small physical size Low cost resistors have the ability to withstand overloads up to times
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications FEATURES AEC-Q200 qualified with PPAP available Available in 0402 to 1812 body size Three dielectric materials AgPd termination
More informationUltrabright White LED, Ø 3 mm
Ultrabright White LED, Ø 3 mm DESCRIPTION The VLHW41 series is a clear, untinted 3 mm LED for high end applications where supreme luminous intensity is required. These lamps utilize the highly developed
More information1.5KE6.8A thru 1.5KE540A, 1N6267A thru 1N6303A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. www.vishay.
TRANSZORB Transient Voltage Suppressors Case Style.5KE FEATURES Glass passivated chip junction Available in uni-directional and bi-directional 500 W peak pulse power capability with a /0 μs waveform, repetitive
More informationOptocoupler, Phototransistor Output, High Reliability, 5300 V RMS, Low Input Current
Optocoupler, Phototransistor Output, High Reliability, 53 V RMS, Low Input Current FEATURES A C 1 2 4 3 C E Operating temperature from -55 C to +11 C Good CTR linearity depending on forward current Isolation
More informationMetal Film Resistors, Pulse Withstanding Protective
End of Life - August 213 www.vishay.com Metal Film Resistors, Pulse Withstanding Protective STANDARD ELECTRICAL SPECIFICATIONS GLOBAL HISTORICAL POWER RATING P 7 C W FEATURES Special design provides lightning
More informationESCC 4001/026 Qualified ( ) High Stability Thick Film Resistor Chips
ESCC 4001/026 Qualified ( ) High Stability Thick Film Resistor Chips thick film chip resistors are specially designed to meet the requirements of the ESA 4001/026 specification. They have undergone the
More informationDC Film Capacitors MKT Radial Potted Type
DC Film Capacitors MKT Radial Potted Type FEATURES 15 mm to 27.5 mm lead pitch. Supplied loose in box and taped on reel Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
More informationPower SMD LED PLCC-2 Plus
Power SMD LED PLCC-2 Plus 2238 DESCRIPTION The VLMW51.. white LED in PLCC-2 plus package is an advanced product in terms of high luminous flux and low thermal resistance. In combination with the small
More informationDC Film Capacitors MKT Radial Potted Type
DC Film Capacitors MKT Radial Potted Type MKT80 FEATURES AEC-Q00 qualified (rev. D) for PCM. mm (for larger available components on request) High temperature capabilities, up to 0 C Capacitance up to 60
More informationStandard 0603 SMD LED
TLMS, TLMO, TLMY, TLMG, TLMP, TLMB Standard 63 SMD LED DESCRIPTION 8562 The new 63 LED series have been designed in the smallest SMD package. This innovative 63 LED technology opens the way to smaller
More informationOptocoupler, Photodarlington Output, Dual Channel, SOIC-8 Package
Optocoupler, Photodarlington Output, i179042 DESCRIPTION A1 C 2 A3 C4 8 C 7E 6C 5E The ILD233T is a high current transfer ratio (CTR) optocoupler. It has a gallium arsenide infrared LED emitter and silicon
More informationHigh Power Infrared Emitting Diode, 940 nm, GaAlAs/GaAs
TSAL51 High Power Infrared Emitting Diode, 94 nm, GaAlAs/GaAs DESCRIPTION 96 1155 TSAL51 is an infrared, 94 nm emitting diode in GaAlAs/GaAs technology with high radiant power, molded in a blue-gray plastic
More informationInsulated Precision Wirewound Resistors Axial Leads
Insulated Precision Wirewound Resistors Axial Leads In wirewound precision resistors, the series holds a leading position in professional applications whenever an excellent stability of the ohmic value
More informationLow Current SMD LED PLCC-2
Low Current SMD LED PLCC-2 VLMC31. 19225 DESCRIPTION These new devices have been designed to meet the increasing demand for low current SMD LEDs. The package of the VLMC31. is the PLCC-2 (equivalent to
More informationHigh Ohmic/High Voltage Metal Film Leaded Resistors
, High Ohmic/High Voltage FEATURES Metal film technology High pulse loading (up to 10 kv) capability Small size (0207/0411) Compatible with lead (Pb)-free and lead containing soldering processes Compliant
More informationVJ 6040 UHF Chip Antenna for Mobile Devices
VJ 64 UHF Chip Antenna for Mobile Devices VJ 64 The company s products are covered by one or more of the following: WO2862 (A1), US2833 (A1), US283575 (A1), WO281173 (A1). Other patents pending. DESCRIPTION
More informationThick Film Resistor Networks, Dual-In-Line, Molded DIP
Thick Film Resistor Networks, Dual-In-Line, Molded DIP FEATURES Isolated, bussed, and dual terminator schematics available 0.160" (4.06 mm) maximum seated height and rugged, molded case construction Thick
More informationHigh Surge Axial Cemented Wirewound Resistors
High Surge Axial Cemented Wirewound Resistors FEATURES High voltage surge (up to 12 kv) withstanding capability Non flammable silicon cement coating High grade ceramic core Material categorization: for
More informationStandard SMD LED PLCC-2
Standard SMD LED PLCC-2 DESCRIPTION 948553 This device has been designed for applications requiring narrow brightness and color selection. The package of this device is the PLCC-2. It consists of a lead
More informationHigh Speed Infrared Emitting Diode, 870 nm, GaAlAs Double Hetero
TSFF55 High Speed Infrared Emitting Diode, 87 nm, GaAlAs Double Hetero 26 DESCRIPTION TSFF55 is an infrared, 87 nm emitting diode in GaAlAs double hetero (DH) technology with high radiant power and high
More informationSchottky Rectifier, 1 A
Schottky Rectifier, 1 A BQPbF FEATURES SMB Cathode Anode Small foot print, surface mountable Low forward voltage drop High frequency operation Available RoHS* COMPLIANT Guard ring for enhanced ruggedness
More informationIR Receiver Module for Light Barrier Systems
Not for New Design - Alternative Available: New TSSP4038 (#82458) www.vishay.com IR Receiver Module for Light Barrier Systems TSOP4038 2 3 MECHANICAL DATA Pinning: = OUT, 2 = GND., 3 = V S 6672 FEATURES
More informationMetallized Polypropylene Film Capacitors DC-Link Capacitor
Metallized Polypropylene Film Capacitors DC-Link Capacitor FEATURES Slim line, low building height Very long useful life time: Up to 100 000 h at U NDC and 70 C High ripple current capability, low ESR,
More informationPreliminary Data Sheet
Surface Mount Ceramic Chip Antennas for 433 MHz The VJ5301M433 series are small form-factor, high-performance chip-antennas optimized for industrial, automotive, and medical applications. chip antenna
More informationHigh Power Infrared Emitting Diode, 940 nm, GaAlAs/GaAs
TSAL64 High Power Infrared Emitting Diode, 94 nm, GaAlAs/GaAs DESCRIPTION 94 8389 TSAL64 is an infrared, 94 nm emitting diode in GaAlAs/GaAs technology with high radiant power molded in a blue-gray plastic
More information2.5 A Output Current IGBT and MOSFET Driver
VO. A Output Current IGBT and MOSFET Driver 9 DESCRIPTION NC A C NC _ The VO consists of a LED optically coupled to an integrated circuit with a power output stage. This optocoupler is ideally suited for
More informationStandard Recovery Diodes, Generation 2 DO-5 (Stud Version), 95 A
Standard Recovery Diodes, Generation 2 DO-5 (Stud Version), 95 A 95PF(R)... DO-203AB (DO-5) PRODUCT SUMMARY I F(AV) Package Circuit configuration 95PF(R)...W DO-203AB (DO-5) 95 A DO-203AB (DO-5) Single
More informationMetal Film Resistors, Non-Magnetic, Industrial, Precision
Metal Film Resistors, Non-Magnetic, Industrial, Precision FEATURES Small size - conformal coated Flame retardant epoxy coating Controlled temperature coefficient Excellent high frequency characteristics
More informationPower MOSFET. IRF510PbF SiHF510-E3 IRF510 SiHF510. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 100 V Gate-Source Voltage V GS ± 20
Power MOSFET PRODUCT SUMMARY (V) 100 R DS(on) () = 0.54 Q g max. (nc) 8.3 Q gs (nc) 2.3 Q gd (nc) 3.8 Configuration Single D TO220AB G FEATURES Dynamic dv/dt rating Available Repetitive avalanche rated
More information1/2" (12.7 mm) Conductive Plastic and Cermet Potentiometer
1/2" (12.7 mm) Conductive Plastic and Cermet Potentiometer FEATURES Robust construction High rotational life (50 000 cycles) Up to three sections PC support plates Rotary switches and solder lugs terminals
More informationCustom Products. Magnetic Components. Vishay Dale. www.vishay.com
Magnetic Components SWITCH MODE MAGNETICS AIR CORE INDUCTORS INDUCTIVE PRODUCTS CUSTOM DESIGN AND PRODUCTION has extensive facilities for custom design and production of custom magnetics. Design applications
More informationInterference Suppression Film Capacitors MKP Radial Potted Type
Interference Suppression Film Capacitors MKP Radial Potted Type FEATURES 7.5 mm to 27.5 mm lead pitch Supplied loose in box, taped on reel Material categorization: For definitions of compliance please
More informationNTC Thermistors, Mini Lug Sensors
NTC Thermistors, Mini Lug Sensors QUICK REFERENCE DATA PARAMETER VALUE UNIT Resistance value at 25 C 10K to 47K Tolerance on R 25 -value ± 2 to ± 3 % B 25/85 -value 3740 to 3984 K Tolerance on B 25/85
More informationStandard Recovery Diodes, (Stud Version), 40 A
Standard Recovery Diodes, (Stud ersion), 40 A S- FEATURES High surge current capability Stud cathode and stud anode version Leaded version available DO-203AB (DO-5) PRODUCT SUMMARY I F(A) 40 A Package
More informationPower MOSFET FEATURES. IRFZ44PbF SiHFZ44-E3 IRFZ44 SiHFZ44 T C = 25 C
Power MOSFET PRODUCT SUMMARY (V) 60 R DS(on) (Ω) V GS = 10 V 0.028 Q g (Max.) (nc) 67 Q gs (nc) 18 Q gd (nc) 25 Configuration Single FEATURES Dynamic dv/dt Rating 175 C Operating Temperature Fast Switching
More informationHigh Stability - High Temperature (230 C) Thin Film Wraparound Chip Resistors, Sulfur Resistant
High Stability - High Temperature (230 C) Thin Film Wraparound Chip Resistors, Sulfur Resistant INTRODUCTION For applications such as down hole applications, the need for parts able to withstand very severe
More informationHigh Ohmic/High Voltage Metal Glaze Leaded Resistors
VR37 High Ohmic/High Voltage FEATURES A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded
More informationP-Channel 20 V (D-S) MOSFET
Si30CDS P-Channel 0 V (D-S) MOSFET MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) I D (A) a Q g (Typ.) - 0 0. at V GS = - 4.5 V - 3. 0.4 at V GS = -.5 V -.7 3.3 nc TO-36 (SOT-3) FEATURES Halogen-free According
More informationHigh Ohmic/High Voltage Metal Glaze Leaded Resistors
High Ohmic/High Voltage Metal Glaze Leaded Resistors FEATURES Technology: Metal glaze A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive
More informationOptocoupler, Phototransistor Output, with Base Connection
HA/HA2/HA3/HA4/HA5 FEATURES Interfaces with common logic families Input-output coupling capacitance < pf Industry standard dual-in line 6-pin package A C NC 2 3 6 5 4 B C E Isolation test voltage: 5300
More informationOptocoupler, Phototransistor Output, with Base Connection in SOIC-8 Package
Optocoupler, Phototransistor Output, FEATURES High BV CEO, 70 V Vishay Semiconductors i79002 A K NC NC 2 3 4 8 7 6 5 NC B C E Isolation test voltage, 4000 V RMS Industry standard SOIC-8A surface mountable
More informationP-Channel 20-V (D-S) MOSFET
Si33DS P-Channel -V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A).39 at V GS = -.5 V -.7 -.5 at V GS = -.5 V -..68 at V GS = -.8 V - 3.5 FEATURES Halogen-free According to IEC 69-- Available
More informationPower MOSFET FEATURES. IRL540PbF SiHL540-E3 IRL540 SiHL540
Power MOSFET PRODUCT SUMMARY (V) 100 R DS(on) (Ω) = 5.0 V 0.077 Q g (Max.) (nc) 64 Q gs (nc) 9.4 Q gd (nc) 27 Configuration Single TO220AB G DS ORDERING INFORMATION Package Lead (Pb)free SnPb G D S NChannel
More information